]> err.no Git - linux-2.6/log
linux-2.6
18 years agoIB/ipath: allow SMA to be disabled
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:45 +0000 (11:24 -0700)]
IB/ipath: allow SMA to be disabled

This is useful for testing purposes.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: handle sq_sig_all field correctly
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:44 +0000 (11:24 -0700)]
IB/ipath: handle sq_sig_all field correctly

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: put a limit on the number of QPs that can be created
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:43 +0000 (11:24 -0700)]
IB/ipath: put a limit on the number of QPs that can be created

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: validate path_mig_state properly
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:42 +0000 (11:24 -0700)]
IB/ipath: validate path_mig_state properly

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: be more strict about testing the modify QP verb
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:41 +0000 (11:24 -0700)]
IB/ipath: be more strict about testing the modify QP verb

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: add serial number to hardware freeze error message
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:40 +0000 (11:24 -0700)]
IB/ipath: add serial number to hardware freeze error message

Also added the word "Hardware" after "Fatal" to make it more obvious
that it's hardware, not software.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: support new QLogic product naming scheme
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:39 +0000 (11:24 -0700)]
IB/ipath: support new QLogic product naming scheme

This patch only renames files, fixes product names, and updates
comments.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: account for attached QPs correctly
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:38 +0000 (11:24 -0700)]
IB/ipath: account for attached QPs correctly

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: do not allow use of CQ entries with invalid counts
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:37 +0000 (11:24 -0700)]
IB/ipath: do not allow use of CQ entries with invalid counts

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: add new minor device to allow sending of diag packets
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:36 +0000 (11:24 -0700)]
IB/ipath: add new minor device to allow sending of diag packets

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: trivial cleanups
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:35 +0000 (11:24 -0700)]
IB/ipath: trivial cleanups

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: remove stale references to userspace SMA
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:34 +0000 (11:24 -0700)]
IB/ipath: remove stale references to userspace SMA

When we first submitted a userspace subnet management agent, it was
rejected, so we left it out of the final driver submission.  This patch
removes a number of vestigial references to it.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: simplify debugging code after ipath_core and ib_ipath merger
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:33 +0000 (11:24 -0700)]
IB/ipath: simplify debugging code after ipath_core and ib_ipath merger

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: simplify layering code
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:32 +0000 (11:24 -0700)]
IB/ipath: simplify layering code

A lot of ipath layer code was only called in one place. Now that the
ipath_core and ib_ipath drivers are merged, it's more sensible to simply
inline the simple stuff that the layer code was doing.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: merge ipath_core and ib_ipath drivers
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:31 +0000 (11:24 -0700)]
IB/ipath: merge ipath_core and ib_ipath drivers

There is little point in keeping the two drivers separate, so we are
merging them.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: drop requirement that PIO buffers be mmaped write-only
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:30 +0000 (11:24 -0700)]
IB/ipath: drop requirement that PIO buffers be mmaped write-only

Some userlands try to mmap these pages read-write, so accommodate them.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: fix handling of kpiobufs
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:29 +0000 (11:24 -0700)]
IB/ipath: fix handling of kpiobufs

Change comment: no longer imply that user can set ipath_kpiobufs to zero.
Actually set ipath_kpiobufs from parameter. Previously only altered
per-device ipath_lastport_piobuf, which was over-written in chip init.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: fix for crash on module unload, if cfgports < portcnt
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:28 +0000 (11:24 -0700)]
IB/ipath: fix for crash on module unload, if cfgports < portcnt

Allocate enough pointers for all possible ports, to avoid problems in
cleanup/unload.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: lock resource limit counters correctly
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:27 +0000 (11:24 -0700)]
IB/ipath: lock resource limit counters correctly

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: More changes to support InfiniPath on PowerPC 970 systems
Bryan O'Sullivan [Fri, 25 Aug 2006 18:24:26 +0000 (11:24 -0700)]
IB/ipath: More changes to support InfiniPath on PowerPC 970 systems

Ordering of writethrough store buffers needs to be forced, and we need
to use ifdef to get writethrough behavior to InfiniPath buffers, because
there is no generic way to specify that at this time (similar to code
in char/drm/drm_vm.c and block/z2ram.c).

Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipath: Performance improvements via mmap of queues
Ralph Campbell [Fri, 22 Sep 2006 22:22:26 +0000 (15:22 -0700)]
IB/ipath: Performance improvements via mmap of queues

Improve performance of userspace post receive, post SRQ receive, and
poll CQ operations for ipath by allowing userspace to directly mmap()
receive queues and completion queues.  This eliminates the copying
between userspace and the kernel in the data path.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Pass userspace data to modify_srq and modify_qp methods
Ralph Campbell [Fri, 11 Aug 2006 21:58:09 +0000 (14:58 -0700)]
IB/uverbs: Pass userspace data to modify_srq and modify_qp methods

Pass a struct ib_udata to the low-level driver's ->modify_srq() and
->modify_qp() methods, so that it can get to the device-specific data
passed in by the userspace driver.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Allow resize CQ operation to return driver-specific data
Ralph Campbell [Fri, 22 Sep 2006 22:22:24 +0000 (15:22 -0700)]
IB/uverbs: Allow resize CQ operation to return driver-specific data

Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level
drivers can return data from a resize CQ operation to userspace.  Have
ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump
the userspace ABI.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ehca: Add driver for IBM eHCA InfiniBand adapters
Heiko J Schick [Fri, 22 Sep 2006 22:22:22 +0000 (15:22 -0700)]
IB/ehca: Add driver for IBM eHCA InfiniBand adapters

Add a driver for IBM GX bus InfiniBand adapters, which are usable with
some pSeries/System p systems.

Signed-off-by: Heiko J Schick <schickhj.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/srp: Add port/device attributes
Ishai Rabinovitz [Tue, 15 Aug 2006 14:34:52 +0000 (17:34 +0300)]
IB/srp: Add port/device attributes

Add local_ib_device and local_ib_port attributes to srp scsi_host.
These are needed when we want to connect to the same target through
multiple distinct ports.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Include the header we really want
James Lentini [Fri, 22 Sep 2006 22:17:20 +0000 (15:17 -0700)]
IB/mthca: Include the header we really want

Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Fix lockdep warning when QP is created with 2 CQs
Roland Dreier [Fri, 22 Sep 2006 22:17:20 +0000 (15:17 -0700)]
IB/uverbs: Fix lockdep warning when QP is created with 2 CQs

Lockdep warns when userspace creates a QP that uses different CQs for
send completions and receive completions, because both CQs are locked
and their mutexes belong to the same lock class.  However, we know
that the mutexes are distinct and the nesting is safe (there is no
possibility of AB-BA deadlock because the mutexes are locked with
down_read()), so annotate the situation with SINGLE_DEPTH_NESTING to
get rid of the lockdep warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Use idr_read_cq() where appropriate
Roland Dreier [Fri, 22 Sep 2006 22:17:19 +0000 (15:17 -0700)]
IB/uverbs: Use idr_read_cq() where appropriate

There were two functions that open-coded idr_read_cq() in terms of
idr_read_uobj() rather than using the helper.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/ipoib: Fix flush/start xmit race (from code review)
Michael S. Tsirkin [Thu, 3 Aug 2006 19:16:06 +0000 (22:16 +0300)]
IB/ipoib: Fix flush/start xmit race (from code review)

Prevent flush task from freeing the ipoib_neigh pointer, while
ipoib_start_xmit() is accessing the ipoib_neigh through the pointer it
has loaded from the skb's hardware address.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Don't use privileged UAR for kernel access
Michael S. Tsirkin [Fri, 22 Sep 2006 22:17:18 +0000 (15:17 -0700)]
IB/mthca: Don't use privileged UAR for kernel access

Make kernel use UAR2 instead of UAR1 for hardware access: this adds
sanity checking from the hardware side, without any performance cost.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Fix lid used for sending traps
Jack Morgenstein [Tue, 19 Sep 2006 08:13:24 +0000 (11:13 +0300)]
IB/mthca: Fix lid used for sending traps

The SM LID used to send traps to is incorrectly set to port LID.  This
is a regression from 2.6.17 -- after a PortInfo MAD is received, no
traps are sent to the SM LID.  The traps go to the loopback interface
instead, and are dropped there.  The SM LID should be taken from the
sm_lid of the PortInfo response.

The bug was introduced by commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5:
IB/mthca: Add client reregister event generation

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoMerge git://git.infradead.org/~dwmw2/hdroneline
Linus Torvalds [Fri, 22 Sep 2006 19:56:22 +0000 (12:56 -0700)]
Merge git://git.infradead.org/~dwmw2/hdroneline

* git://git.infradead.org/~dwmw2/hdroneline:
  [HEADERS] One line per header in Kbuild files to reduce conflicts

Manual (trivial) conflict resolution in include/asm-s390/Kbuild

18 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Fri, 22 Sep 2006 19:52:16 +0000 (12:52 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Remove overzealous BUG_ON()
  ocfs2: Don't print on unknown remote blocking call
  ocfs2: Remove EXPERIMENTAL dependency
  ocfs2: implement directory read-ahead
  ocfs2: properly update i_mtime on buffered write
  ocfs2: Fix directory link count checks in ocfs2_link()
  ocfs2: move nlink check in ocfs2_mknod()
  ocfs2: Fix heartbeat sector calculation
  [PATCH] fs/ocfs2/ioctl.c should #include "ioctl.h"
  ocfs2: add ext2 attributes
  configfs: Prevent duplicate subsystem names.

18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 22 Sep 2006 19:51:33 +0000 (12:51 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits)
  [BLOCK] dm-crypt: trivial comment improvements
  [CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available
  [CRYPTO] padlock: Convert padlock-sha to use crypto_hash
  [CRYPTO] users: Use crypto_comp and crypto_has_*
  [CRYPTO] api: Add crypto_comp and crypto_has_*
  [CRYPTO] users: Use crypto_hash interface instead of crypto_digest
  [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
  [CRYPTO] digest: Remove old HMAC implementation
  [CRYPTO] doc: Update documentation for hash and me
  [SCTP]: Use HMAC template and hash interface
  [IPSEC]: Use HMAC template and hash interface
  [CRYPTO] tcrypt: Use HMAC template and hash interface
  [CRYPTO] hmac: Add crypto template implementation
  [CRYPTO] digest: Added user API for new hash type
  [CRYPTO] api: Mark parts of cipher interface as deprecated
  [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument
  [CRYPTO] drivers: Remove obsolete block cipher operations
  [CRYPTO] users: Use block ciphers where applicable
  [SUNRPC] GSS: Use block ciphers where applicable
  [IPSEC] ESP: Use block ciphers where applicable
  ...

18 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 22 Sep 2006 19:50:35 +0000 (12:50 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [S390] hypfs crashes with invalid mount option.
  [S390] cio: subchannel evaluation function operates without lock
  [S390] cio: always query all paths on path verification.
  [S390] cio: update path groups on logical CHPID changes.
  [S390] cio: subchannels in no-path state.
  [S390] Replace nopav-message on VM.
  [S390] set modalias for ccw bus uevents.
  [S390] Get rid of DBG macro.
  [S390] Use alternative user-copy operations for new hardware.
  [S390] Make user-copy operations run-time configurable.
  [S390] Cleanup in signal handling code.
  [S390] Cleanup in page table related code.
  [S390] Linux API for writing z/VM APPLDATA Monitor records.
  [S390] xpram off by one error.
  [S390] Remove kexec experimental flag.
  [S390] cleanup appldata.
  [S390] fix typo in vmcp.
  [S390] Kernel stack overflow handling.
  [S390] qdio slsb processing state.
  [S390] Missing initialization in common i/o layer.
  ...

18 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Fri, 22 Sep 2006 19:49:18 +0000 (12:49 -0700)]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  Remove accidentally-added include/linux/utsrelease.h
  Revert "[MTD] blkdev helper code: fix printk format warning"
  [MTD] Add SSFDC (SmartMedia) read-only translation layer
  [MTD] pmc551 pci cleanup
  [MTD] pmc551 use kzalloc
  [MTD] pmc551 whitespace cleanup
  [MTD] Remove iq80310 map driver
  [MTD NAND] Fix in typo ndfc.c causing wrong ECC layout
  [MTD] physmap: add power management support
  ioremap balanced with iounmap for drivers/mtd subsystem
  [MTD] Switch to pci_get_device and do ref counting
  [MTD] blkdev helper code: fix printk format warning
  [MTD] Fix ixp4xx partition parsing.
  [JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h
  [MTD NAND] Remove old code in au1550nd.c
  [MTD] Unlock NOR flash automatically where necessary

18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Fri, 22 Sep 2006 19:48:03 +0000 (12:48 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (114 commits)
  [POWERPC] Fix ohare IDE irq workaround on old powermacs
  [POWERPC] EEH: Power4 systems sometimes need multiple resets.
  [POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t.
  [POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c
  [POWERPC] Maple U3 HT - reject inappropriate config space access
  [POWERPC] Fix IPIC pending register assignments
  [POWERPC] powerpc: fix building gdb against asm/ptrace.h
  [POWERPC] Remove DISCONTIGMEM cruft from page.h
  [POWERPC] Merge iSeries i/o operations with the rest
  [POWERPC] 40x: Fix debug status register defines
  [POWERPC] Fix compile error in sbc8560
  [POWERPC] EEH: support MMIO enable recovery step
  [POWERPC] EEH: enable MMIO/DMA on frozen slot
  [POWERPC] EEH: code comment cleanup
  [POWERPC] EEH: balance pcidev_get/put calls
  [POWERPC] PPC: Fix xmon stack frame address in backtrace
  [POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX
  [POWERPC] Start arch/powerpc/boot code reorganization
  [POWERPC] Define of_read_ulong helper
  [POWERPC] iseries: eliminate a couple of warnings
  ...

18 years agoRemove accidentally-added include/linux/utsrelease.h
David Woodhouse [Fri, 22 Sep 2006 17:41:20 +0000 (18:41 +0100)]
Remove accidentally-added include/linux/utsrelease.h

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years agoRevert "[MTD] blkdev helper code: fix printk format warning"
David Woodhouse [Fri, 22 Sep 2006 10:05:42 +0000 (11:05 +0100)]
Revert "[MTD] blkdev helper code: fix printk format warning"

This reverts commit 668040fcd1e06fc3e68a92708cbdfa5a52c37d3c.

The 'flags' field of the struct request is 'unsigned long'. Quite
how Randy came to see 'long int format, different type arg' I don't
know, but it doesn't seem to be the case any more.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] Add SSFDC (SmartMedia) read-only translation layer
Claudio Lanconelli [Fri, 22 Sep 2006 10:01:37 +0000 (11:01 +0100)]
[MTD] Add SSFDC (SmartMedia) read-only translation layer

Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] pmc551 pci cleanup
Jiri Slaby [Tue, 19 Sep 2006 19:55:28 +0000 (21:55 +0200)]
[MTD] pmc551 pci cleanup

Use pci_resource_start for getting start of regions and pci_iomap to not
doing this directly by using dev->resource... (Thanks to Rolf Eike Beer)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] pmc551 use kzalloc
Jiri Slaby [Tue, 19 Sep 2006 19:55:18 +0000 (21:55 +0200)]
[MTD] pmc551 use kzalloc

Use kzalloc instad of kmalloc+memset(0).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] pmc551 whitespace cleanup
Jiri Slaby [Tue, 19 Sep 2006 19:55:06 +0000 (21:55 +0200)]
[MTD] pmc551 whitespace cleanup

Spaces were used for indent, there was more than 80 columns per line. Get
rid of that stuff.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] Remove iq80310 map driver
Lennert Buytenhek [Thu, 21 Sep 2006 01:47:48 +0000 (03:47 +0200)]
[MTD] Remove iq80310 map driver

The iq80310 mtd map driver depends on ARCH_IQ80310, which isn't
defined anywhere in the tree (as we don't have 80310 support), and
furthermore, everything the driver does can be done with physmap
instead.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD NAND] Fix in typo ndfc.c causing wrong ECC layout
Frank Haverkamp [Wed, 20 Sep 2006 15:24:52 +0000 (17:24 +0200)]
[MTD NAND] Fix in typo ndfc.c causing wrong ECC layout

Due to this typo, a wrong ECC layout table is chosen.

Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] physmap: add power management support
Lennert Buytenhek [Thu, 21 Sep 2006 21:16:48 +0000 (23:16 +0200)]
[MTD] physmap: add power management support

Implement PM handling for physmap.  Idea from Steven Scholz, patch
by David Anders.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years agoioremap balanced with iounmap for drivers/mtd subsystem
Amol Lad [Thu, 21 Sep 2006 12:42:43 +0000 (18:12 +0530)]
ioremap balanced with iounmap for drivers/mtd subsystem

ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Tested (compilation only) with:
- allmodconfig
- Modifying drivers/mtd/maps/Kconfig and drivers/mtd/nand/Kconfig to
make sure that the changed file is compiling without warning

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] Switch to pci_get_device and do ref counting
Alan Cox [Fri, 22 Sep 2006 09:19:20 +0000 (10:19 +0100)]
[MTD] Switch to pci_get_device and do ref counting

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] blkdev helper code: fix printk format warning
Randy Dunlap [Fri, 22 Sep 2006 09:17:28 +0000 (10:17 +0100)]
[MTD] blkdev helper code: fix printk format warning

Fix printk format warning(s):
drivers/mtd/mtd_blkdevs.c:72: warning: long int format, different type arg (arg 2)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] Fix ixp4xx partition parsing.
Brian Walsh [Fri, 22 Sep 2006 09:16:16 +0000 (10:16 +0100)]
[MTD] Fix ixp4xx partition parsing.

If the amount of flash is not divisible by 2 then the mask in
parse_mtd_partitions would fail to work as designed.  Passing in the base
address corrects this problem.

Signed-off-by: Brian Walsh <brian@walsh.ws>
Cc: Deepak Sanexa <dsanexa@mvista.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h
Michal Piotrowski [Fri, 22 Sep 2006 09:13:46 +0000 (10:13 +0100)]
[JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h

We certainly don't need the check for Linux version > 2.5.2, and in fact
we can also live without the __ECOS check, since we can just add it back
in the eCos git tree which is automatically derived from the Linux fs/jffs2
subdirectory in the upstream git tree.

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD NAND] Remove old code in au1550nd.c
Michal Piotrowski [Fri, 22 Sep 2006 09:09:44 +0000 (10:09 +0100)]
[MTD NAND] Remove old code in au1550nd.c

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[MTD] Unlock NOR flash automatically where necessary
HÃ¥vard Skinnemoen [Fri, 22 Sep 2006 09:07:08 +0000 (10:07 +0100)]
[MTD] Unlock NOR flash automatically where necessary

Introduce the MTD_STUPID_LOCK flag which indicates that the flash chip is
always locked after power-up, so all sectors need to be unlocked before it
is usable.

If this flag is set, and the chip provides an unlock() operation,
mtd_add_device will unlock the whole MTD device if it's writeable.  This
means that non-writeable partitions will stay locked.

Set MTD_STUPID_LOCK in fixup_use_atmel_lock() so that these chips will work
as expected.

Signed-off-by: HÃ¥vard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
18 years ago[POWERPC] Fix ohare IDE irq workaround on old powermacs
Benjamin Herrenschmidt [Fri, 22 Sep 2006 02:56:30 +0000 (12:56 +1000)]
[POWERPC] Fix ohare IDE irq workaround on old powermacs

Looks like a workaround for old bogus OF bitrot...  This fixes it and
hence fixes boot on some performa machines.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] EEH: Power4 systems sometimes need multiple resets.
Linas Vepstas [Thu, 21 Sep 2006 23:25:56 +0000 (18:25 -0500)]
[POWERPC] EEH: Power4 systems sometimes need multiple resets.

On detection of an EEH error, some Power4 systems seem to occasionally
want to be reset twice before they report themselves as fully recovered.
This patch re-arranges the code to attempt additional resets if the first
one doesn't take.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t.
Scott Wood [Thu, 21 Sep 2006 18:11:52 +0000 (13:11 -0500)]
[POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t.

This patch causes fsl_soc.h to import the definition of phys_addr_t
itself, rather than relying on its includer to do so.

Signed-off-by: Scott Wood <scott@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c
Nathan Lynch [Thu, 21 Sep 2006 19:31:13 +0000 (14:31 -0500)]
[POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c

Noticed that the U3_*CFA macros have some typos:

#define U3_HT_CFA0(devfn, off) \
((((unsigned long)devfn) << 8) | offset)

(refers to offset rather than off)

#define U3_AGP_CFA0(devfn, off) \
((1 << (unsigned long)PCI_SLOT(dev_fn)) \
| (((unsigned long)PCI_FUNC(dev_fn)) << 8) \

(refers to dev_fn rather than devfn)

Things happen to work, but there doesn't seem to be any reason these
shouldn't be functions.  Overall behavior should be unchanged.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Maple U3 HT - reject inappropriate config space access
Nathan Lynch [Thu, 21 Sep 2006 19:25:34 +0000 (14:25 -0500)]
[POWERPC] Maple U3 HT - reject inappropriate config space access

When there is a PCI-X mode 2 capable device behind the HT<->PCI-X
bridge, the pci core decides that the device has the extended 4K
config space, even though the bus is not operating in mode 2.  This is
because the u3_ht pci ops silently accept offsets greater than 255 but
use only the 8 least significant bits, which means reading at offset
0x100 gets the data at offset 0x0, and causes confusion for lspci.

Reject accesses to configuration space offsets greater than 255.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Fix IPIC pending register assignments
Scott Wood [Thu, 21 Sep 2006 18:10:51 +0000 (13:10 -0500)]
[POWERPC] Fix IPIC pending register assignments

This patch fixes the assignment of pending registers to IRQ numbers for
the IPIC; the code previously assigned all IRQs to the high pending word
regardless of which word the interrupt belonged to.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] powerpc: fix building gdb against asm/ptrace.h
Arnd Bergmann [Thu, 21 Sep 2006 10:29:51 +0000 (12:29 +0200)]
[POWERPC] powerpc: fix building gdb against asm/ptrace.h

Ulrich Weigand found a bug with the current version of the
asm-powerpc/ptrace.h that prevents building at least the
SPU target version of gdb, since some ptrace opcodes are
not defined.

The problem seems to have originated in the merging of 32 and
64 bit versions of that file, the problem is that some opcodes
are only valid on 64 bit kernels, but are also used by 32 bit
programs, so they can't depends on the __powerpc64__ symbol.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Remove DISCONTIGMEM cruft from page.h
Michael Ellerman [Thu, 21 Sep 2006 08:21:35 +0000 (18:21 +1000)]
[POWERPC] Remove DISCONTIGMEM cruft from page.h

This looks like cruft to me, these functions don't exist AFAICT,
and I can't see that it's possible to even enable DISCONTIGMEM on
powerpc anymore. CC'ing some folks who might know better, based on
the who-touched-it-last principle.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Merge iSeries i/o operations with the rest
Stephen Rothwell [Thu, 21 Sep 2006 08:00:00 +0000 (18:00 +1000)]
[POWERPC] Merge iSeries i/o operations with the rest

This patch changes the io operations so that they are out of line if
CONFIG_PPC_ISERIES is set and includes a firmware feature check in
that case.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] 40x: Fix debug status register defines
Josh Boyer [Wed, 20 Sep 2006 14:11:59 +0000 (09:11 -0500)]
[POWERPC] 40x: Fix debug status register defines

This fixes some debug register defines on PPC 40x that were incorrect.

Signed-off-by: Josh Boyer <jdub@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Fix compile error in sbc8560
Amy Fong [Tue, 19 Sep 2006 03:07:24 +0000 (23:07 -0400)]
[POWERPC] Fix compile error in sbc8560

The following fixes compile errors in sbc8560.

Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] EEH: support MMIO enable recovery step
Linas Vepstas [Fri, 15 Sep 2006 23:58:59 +0000 (18:58 -0500)]
[POWERPC] EEH: support MMIO enable recovery step

Update to the PowerPC PCI error recovery code.

Add code to enable MMIO if a device driver reports that it is capable
of recovering on its own.  One anticipated use of this having a device
driver enable MMIO so that it can take a register dump, which might
then be followed by the device driver requesting a full reset.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] EEH: enable MMIO/DMA on frozen slot
Linas Vepstas [Fri, 15 Sep 2006 23:57:42 +0000 (18:57 -0500)]
[POWERPC] EEH: enable MMIO/DMA on frozen slot

Add wrapper around the rtas call to enable MMIO or DMA on a frozen pci
slot.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] EEH: code comment cleanup
Linas Vepstas [Fri, 15 Sep 2006 23:56:35 +0000 (18:56 -0500)]
[POWERPC] EEH: code comment cleanup

Clean up subroutine documentation; mostly formatting changes, with
some new content.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] EEH: balance pcidev_get/put calls
Linas Vepstas [Fri, 15 Sep 2006 23:55:34 +0000 (18:55 -0500)]
[POWERPC] EEH: balance pcidev_get/put calls

This corrects a pci_dev get/put imbalance that can occur only in
highly unlikely situations (kmalloc failures, pci devices with
overlapping resource addresses).  No actual failures seen, this was
spotted during code review.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] PPC: Fix xmon stack frame address in backtrace
Josh Boyer [Fri, 15 Sep 2006 19:53:10 +0000 (14:53 -0500)]
[POWERPC] PPC: Fix xmon stack frame address in backtrace

The stack frame address was being printed incorrectly in the backtrace
option of XMON on PPC.  This patch fixes it to print the actual stack
address instead of the address of the local variable that contains it.

Signed-off-by: Josh Boyer <jdub@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX
Peter Bergner [Thu, 14 Sep 2006 19:18:38 +0000 (14:18 -0500)]
[POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX

Jakub noticed the cputable.c entry for Xilinx Virtex-4 FX was missing
a .platform value, so the AT_PLATFORM value wouldn't be set correctly.
This adds it.

Signed-off-by: Peter Bergner <bergner@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago[BLOCK] dm-crypt: trivial comment improvements
Rik Snel [Sat, 2 Sep 2006 08:17:33 +0000 (18:17 +1000)]
[BLOCK] dm-crypt: trivial comment improvements

Just some minor comment nits.

- little-endian is better than low-endian
- and since it is called essiv everywere it should also be essiv
  in the comments (and not ess_iv)

Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available
Herbert Xu [Sat, 26 Aug 2006 08:44:31 +0000 (18:44 +1000)]
[CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available

This patch marks the crypto_digest_* functions and crypto_alg_available
as deprecated.  They've been replaced by crypto_hash_* and crypto_has_*
respectively.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] padlock: Convert padlock-sha to use crypto_hash
Herbert Xu [Sat, 26 Aug 2006 08:34:10 +0000 (18:34 +1000)]
[CRYPTO] padlock: Convert padlock-sha to use crypto_hash

This patch converts padlock-sha to use crypto_hash for its fallback.
It also changes the fallback selection to use selection by type instead
of name.  This is done through the new CRYPTO_ALG_NEED_FALLBACK bit,
which is set if and only if an algorithm needs a fallback of the same
type.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] users: Use crypto_comp and crypto_has_*
Herbert Xu [Sat, 26 Aug 2006 08:12:40 +0000 (18:12 +1000)]
[CRYPTO] users: Use crypto_comp and crypto_has_*

This patch converts all users to use the new crypto_comp type and the
crypto_has_* functions.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] api: Add crypto_comp and crypto_has_*
Herbert Xu [Sat, 26 Aug 2006 07:35:45 +0000 (17:35 +1000)]
[CRYPTO] api: Add crypto_comp and crypto_has_*

This patch adds the crypto_comp type to complete the compile-time checking
conversion.  The functions crypto_has_alg and crypto_has_cipher, etc. are
also added to replace crypto_alg_available.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] users: Use crypto_hash interface instead of crypto_digest
Herbert Xu [Thu, 24 Aug 2006 09:10:20 +0000 (19:10 +1000)]
[CRYPTO] users: Use crypto_hash interface instead of crypto_digest

This patch converts all remaining crypto_digest users to use the new
crypto_hash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
Herbert Xu [Thu, 24 Aug 2006 08:45:50 +0000 (18:45 +1000)]
[SCSI] iscsi: Use crypto_hash interface instead of crypto_digest

This patch converts ISCSI to use the new crypto_hash interface instead
of crypto_digest.  It's a fairly straightforward substitution.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] digest: Remove old HMAC implementation
Herbert Xu [Sun, 20 Aug 2006 05:25:22 +0000 (15:25 +1000)]
[CRYPTO] digest: Remove old HMAC implementation

This patch removes the old HMAC implementation now that nobody uses it
anymore.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[CRYPTO] doc: Update documentation for hash and me
Herbert Xu [Sun, 20 Aug 2006 05:17:04 +0000 (15:17 +1000)]
[CRYPTO] doc: Update documentation for hash and me

This patch updates the documentation to reflect the switch from digest
to hash.  It also replaces notes about emailing James Morris to refer
to me instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[SCTP]: Use HMAC template and hash interface
Herbert Xu [Sun, 20 Aug 2006 05:07:14 +0000 (15:07 +1000)]
[SCTP]: Use HMAC template and hash interface

This patch converts SCTP to use the new HMAC template and hash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Use HMAC template and hash interface
Herbert Xu [Sun, 20 Aug 2006 04:24:50 +0000 (14:24 +1000)]
[IPSEC]: Use HMAC template and hash interface

This patch converts IPsec to use the new HMAC template.  The names of
existing simple digest algorithms may still be used to refer to their
HMAC composites.

The same structure can be used by other MACs such as AES-XCBC-MAC.

This patch also switches from the digest interface to hash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[CRYPTO] tcrypt: Use HMAC template and hash interface
Herbert Xu [Sat, 19 Aug 2006 11:38:49 +0000 (21:38 +1000)]
[CRYPTO] tcrypt: Use HMAC template and hash interface

This patch converts tcrypt to use the new HMAC template rather than the
hard-coded version of HMAC.  It also converts all digest users to use
the new cipher interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[CRYPTO] hmac: Add crypto template implementation
Herbert Xu [Mon, 21 Aug 2006 10:50:52 +0000 (20:50 +1000)]
[CRYPTO] hmac: Add crypto template implementation

This patch rewrites HMAC as a crypto template.  This means that HMAC is no
longer a hard-coded part of the API.  It's now a template that generates
standard digest algorithms like any other.

The old HMAC is preserved until all current users are converted.

The same structure can be used by other MACs such as AES-XCBC-MAC.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[CRYPTO] digest: Added user API for new hash type
Herbert Xu [Sat, 19 Aug 2006 12:24:23 +0000 (22:24 +1000)]
[CRYPTO] digest: Added user API for new hash type

The existing digest user interface is inadequate for support asynchronous
operations.  For one it doesn't return a value to indicate success or
failure, nor does it take a per-operation descriptor which is essential
for the issuing of requests while other requests are still outstanding.

This patch is the first in a series of steps to remodel the interface
for asynchronous operations.

For the ease of transition the new interface will be known as "hash"
while the old one will remain as "digest".

This patch also changes sg_next to allow chaining.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] api: Mark parts of cipher interface as deprecated
Herbert Xu [Mon, 21 Aug 2006 11:40:49 +0000 (21:40 +1000)]
[CRYPTO] api: Mark parts of cipher interface as deprecated

Mark the parts of the cipher interface that have been replaced by
block ciphers as deprecated.  Thanks to Andrew Morton for suggesting
doing this before removing them completely.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument
Herbert Xu [Mon, 14 Aug 2006 13:11:53 +0000 (23:11 +1000)]
[PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument

This patch adds a const modifier to the buf argument of sg_set_buf and
sg_init_one.  This lets people call it with pointers that are const.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] drivers: Remove obsolete block cipher operations
Herbert Xu [Sat, 5 Aug 2006 06:28:19 +0000 (16:28 +1000)]
[CRYPTO] drivers: Remove obsolete block cipher operations

This patch removes obsolete block operations of the simple cipher type
from drivers.  These were preserved so that existing users can make a
smooth transition.  Now that the transition is complete, they are no
longer needed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] users: Use block ciphers where applicable
Herbert Xu [Tue, 22 Aug 2006 10:36:13 +0000 (20:36 +1000)]
[CRYPTO] users: Use block ciphers where applicable

This patch converts all remaining users to use the new block cipher type
where applicable.  It also changes all simple cipher operations to use
the new encrypt_one/decrypt_one interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[SUNRPC] GSS: Use block ciphers where applicable
Herbert Xu [Tue, 22 Aug 2006 10:33:54 +0000 (20:33 +1000)]
[SUNRPC] GSS: Use block ciphers where applicable

This patch converts SUNRPC/GSS to use the new block cipher type where
applicable.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[IPSEC] ESP: Use block ciphers where applicable
Herbert Xu [Sun, 30 Jul 2006 05:41:01 +0000 (15:41 +1000)]
[IPSEC] ESP: Use block ciphers where applicable

This patch converts IPSec/ESP to use the new block cipher type where
applicable.  Similar to the HMAC conversion, existing algorithm names
have been kept for compatibility.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[IPSEC]: Add compatibility algorithm name support
Herbert Xu [Sat, 12 Aug 2006 22:50:00 +0000 (08:50 +1000)]
[IPSEC]: Add compatibility algorithm name support

This patch adds a compatibility name field for each IPsec algorithm.  This
is needed when parameterised algorithms are used.  For example, "md5" will
become "hmac(md5)", and "aes" will become "cbc(aes)".

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[BLOCK] dm-crypt: Use block ciphers where applicable
Herbert Xu [Tue, 22 Aug 2006 10:29:17 +0000 (20:29 +1000)]
[BLOCK] dm-crypt: Use block ciphers where applicable

This patch converts dm-crypt to use the new block cipher type where
applicable.  It also changes simple cipher operations to use the new
encrypt_one/decrypt_one interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[BLOCK] cryptoloop: Use block ciphers where applicable
Herbert Xu [Thu, 21 Sep 2006 01:45:53 +0000 (11:45 +1000)]
[BLOCK] cryptoloop: Use block ciphers where applicable

This patch converts cryptoloop to use the new block cipher type where
applicable.  As a result the ECB-specific and CBC-specific transfer
functions have been merged.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] tcrypt: Use block ciphers where applicable
Herbert Xu [Sat, 12 Aug 2006 22:26:09 +0000 (08:26 +1000)]
[CRYPTO] tcrypt: Use block ciphers where applicable

This patch converts tcrypt to use the new block cipher type where
applicable.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] s390: Added block cipher versions of CBC/ECB
Herbert Xu [Mon, 21 Aug 2006 11:39:24 +0000 (21:39 +1000)]
[CRYPTO] s390: Added block cipher versions of CBC/ECB

This patch adds block cipher algorithms for S390.  Once all users of the
old cipher type have been converted the existing CBC/ECB non-block cipher
operations will be removed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] padlock: Added block cipher versions of CBC/ECB
Herbert Xu [Mon, 21 Aug 2006 11:38:42 +0000 (21:38 +1000)]
[CRYPTO] padlock: Added block cipher versions of CBC/ECB

This patch adds block cipher algorithms for cbc(aes) and ecb(aes) for
the PadLock device.  Once all users to the old cipher type have been
converted the old cbc/ecb PadLock operations will be removed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] cipher: Added block ciphers for CBC/ECB
Herbert Xu [Thu, 21 Sep 2006 01:44:08 +0000 (11:44 +1000)]
[CRYPTO] cipher: Added block ciphers for CBC/ECB

This patch adds two block cipher algorithms, CBC and ECB.  These
are implemented as templates on top of existing single-block cipher
algorithms.  They invoke the single-block cipher through the new
encrypt_one/decrypt_one interface.

This also optimises the in-place encryption and decryption to remove
the cost of an IV copy each round.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] cipher: Added block cipher type
Herbert Xu [Mon, 21 Aug 2006 14:07:53 +0000 (00:07 +1000)]
[CRYPTO] cipher: Added block cipher type

This patch adds the new type of block ciphers.  Unlike current cipher
algorithms which operate on a single block at a time, block ciphers
operate on an arbitrarily long linear area of data.  As it is block-based,
it will skip any data remaining at the end which cannot form a block.

The block cipher has one major difference when compared to the existing
block cipher implementation.  The sg walking is now performed by the
algorithm rather than the cipher mid-layer.  This is needed for drivers
that directly support sg lists.  It also improves performance for all
algorithms as it reduces the total number of indirect calls by one.

In future the existing cipher algorithm will be converted to only have
a single-block interface.  This will be done after all existing users
have switched over to the new block cipher type.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] scatterwalk: Prepare for block ciphers
Herbert Xu [Sat, 12 Aug 2006 11:56:17 +0000 (21:56 +1000)]
[CRYPTO] scatterwalk: Prepare for block ciphers

This patch prepares the scatterwalk code for use by the new block cipher
type.

Firstly it halves the size of scatter_walk on 32-bit platforms.  This
is important as we allocate at least two of these objects on the stack
for each block cipher operation.

It also exports the symbols since the block cipher code can be built as
a module.

Finally there is a hack in scatterwalk_unmap that relies on progress
being made.  Unfortunately, for hardware crypto we can't guarantee
progress to be made since the hardware can fail.

So this also gets rid of the hack by not advancing the address returned
by scatterwalk_map.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
18 years ago[CRYPTO] cipher: Added encrypt_one/decrypt_one
Herbert Xu [Sun, 13 Aug 2006 10:58:18 +0000 (20:58 +1000)]
[CRYPTO] cipher: Added encrypt_one/decrypt_one

This patch adds two new operations for the simple cipher that encrypts or
decrypts a single block at a time.  This will be the main interface after
the existing block operations have moved over to the new block ciphers.

It also adds the crypto_cipher type which is currently only used on the
new operations but will be extended to setkey as well once existing users
have been converted to use block ciphers where applicable.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>