Donald Douwsma [Fri, 23 Nov 2007 05:27:42 +0000 (16:27 +1100)]
[XFS] Fix dbflush panic in xfs_qm_sync.
The recent behaviour layer removal dropped the check for quotas that have
been requested at mount time but have subsequently been turned off. This
results in a panic when accessing m_quotainfo which has been freed.
This patch adds the check originally made by xfs_qm_syncall() to
xfs_qm_sync().
Currently XFs has three different fid types: struct fid, struct xfs_fid
and struct xfs_fid2 with hte latter two beeing identicaly and the first
one beeing the same size but an unstructured array with the same size.
This patch consolidates all this to alway uuse struct xfs_fid.
This patch is required for an upcoming patch series from me that revamps
the nfs exporting code and introduces a Linux-wide struct fid.
Majority of host drivers using IDE PCI layer set drive->autotune, the only
exceptions are:
generic.c
ns87415.c
rz1000.c
trm290.c
* no ->set_pio_mode method
it821x.c:
* if memory allocation fails drive->autotune won't be set
(but there also won't be ->set_pio_mode method in such case)
piix.c:
* MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method)
However if there is no ->set_pio_mode method there are no changes in behavior
w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports().
Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set
hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert
atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it.
While at it:
* In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set
hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers
to use it.
Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead
of hwif->err_stops_fifo. As a side-effect this change fixes
hwif->err_stops_fifo not being restored by ide_hwif_restore().
* Split off hpt{374,371,366}_init() helper from init_setup_hpt{374,371,366}().
* Merge init_setup_{374,372n,371,372a,302,366}() into hpt366_init_one().
While at it:
* Use "HPT36x" name for HPT366/HPT368 chipsets.
* Add .chip_name to struct hpt_info and use it to set set d->name.
* Convert .max_ultra in struct hpt_info to .udma_mask and use it to set
d->udma_mask.
* Fix hpt302 to use HPT302_ALLOW_ATA133_6 define.
* Change HPT366/HPT374 interrupt fixup message from KERN_WARNING to KERN_INFO.
* Use the second hpt366_chipsets[] entry for HPT37x chipsets using HPT36x PCI
device ID and fix .enablebits/.host_flags for HPT36x hpt366_chipsets[] entry.
* Bump driver version.
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)
* Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t.
* Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in
setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif
method may still override them).
* Convert IDE PCI host drivers to use ide_pci_device_t DMA masks.
While at it:
* Use ATA_{UDMA,MWDMA,SWDMA}* defines.
* hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345.
* serverworks.c: fix DMA masks being set before checking DMA base.
v2:
* Add missing masks to DECLARE_GENERIC_PCI_DEV() macro.
ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags
Add IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif->no_lba48[_dma]
and then remove no longer needed hwif->no_lba48[_dma]. As a side-effect
this change fixes hwif->no_lba48_dma not being restored by ide_hwif_restore().
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide: remove ->init_setup_dma from ide_pci_device_t (take 2)
* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag.
* Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base()
and use d->name instead of hwif->cds->name.
* Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in
ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer
needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma.
This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts.
v2:
* It is wrong to check simplex bits on CS5510/CS5520 as v1 did.
(Noticed by Alan).
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags. Convert all host drivers using
ide_pci_device_t to use these flags instead of d->autodma and then remove no
longer needed d->autodma.
Add IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define. Convert
all host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD}
instead of d->bootable and then remove no longer needed d->bootable.
* ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
hrtimer: hook compat_sys_nanosleep up to high res timer code
hrtimer: Rework hrtimer_nanosleep to make sys_compat_nanosleep easier
Linus Torvalds [Thu, 18 Oct 2007 22:08:35 +0000 (15:08 -0700)]
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[libata] kill ata_sg_is_last()
Update libata driver for bf548 atapi controller against the 2.6.24 tree.
libata-sff: Correct use of check_status()
drivers/ata: add support to Freescale 3.0Gbps SATA Controller
pata_acpi: fix build breakage if !CONFIG_PM
Linus Torvalds [Thu, 18 Oct 2007 21:51:02 +0000 (14:51 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] time: Move R4000 clockevent device code to separate configurable file
[MIPS] time: Delete dead cycles_per_jiffy, mips_timer_ack and null_timer_ack
[MIPS] IP32: Retire use of plat_timer_setup.
[MIPS] Jazz: Retire use of plat_timer_setup.
[MIPS] IP27: Convert to clock_event_device.
[MIPS] JMR3927: Convert to clock_event_device.
[MIPS] Always do the ARC64_TWIDDLE_PC thing.
Linus Torvalds [Thu, 18 Oct 2007 21:40:30 +0000 (14:40 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (51 commits)
[IPV6]: Fix again the fl6_sock_lookup() fixed locking
[NETFILTER]: nf_conntrack_tcp: fix connection reopening fix
[IPV6]: Fix race in ipv6_flowlabel_opt() when inserting two labels
[IPV6]: Lost locking in fl6_sock_lookup
[IPV6]: Lost locking when inserting a flowlabel in ipv6_fl_list
[NETFILTER]: xt_sctp: fix mistake to pass a pointer where array is required
[NET]: Fix OOPS due to missing check in dev_parse_header().
[TCP]: Remove lost_retrans zero seqno special cases
[NET]: fix carrier-on bug?
[NET]: Fix uninitialised variable in ip_frag_reasm()
[IPSEC]: Rename mode to outer_mode and add inner_mode
[IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMP
[IPSEC]: Use the top IPv4 route's peer instead of the bottom
[IPSEC]: Store afinfo pointer in xfrm_mode
[IPSEC]: Add missing BEET checks
[IPSEC]: Move type and mode map into xfrm_state.c
[IPSEC]: Fix length check in xfrm_parse_spi
[IPSEC]: Move ip_summed zapping out of xfrm6_rcv_spi
[IPSEC]: Get nexthdr from caller in xfrm6_rcv_spi
[IPSEC]: Move tunnel parsing for IPv4 out of xfrm4_input
...
Linus Torvalds [Thu, 18 Oct 2007 21:39:44 +0000 (14:39 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC/64]: Consolidate of_register_driver
[SPARC] Videopix Frame Grabber: Convert device_lock_sem to mutex
[SPARC]: Support for new termios.
[SPARC64]: Check of_get_property() return in pci_determine_mem_io_space().
[SPARC64]: Fix boot failures due to bootmem.
[SPARC64]: Implement atomic backoff.
Shannon Nelson [Thu, 18 Oct 2007 10:07:15 +0000 (03:07 -0700)]
I/OAT: Add completion callback for async_tx interface use
The async_tx interface includes a completion callback. This adds support
for using that callback, including using interrupts on completion.
[akpm@linux-foundation.org: various fixes] Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Thu, 18 Oct 2007 10:07:14 +0000 (03:07 -0700)]
I/OAT: Tighten descriptor setup performance
The change to the async_tx interface cost this driver some performance by
spreading the descriptor setup across several functions, including multiple
passes over the new descriptor chain. Here we bring the work back into one
primary function and only do one pass.
[akpm@linux-foundation.org: cleanups, uninline] Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Thu, 18 Oct 2007 10:07:13 +0000 (03:07 -0700)]
I/OAT: clean up error handling and some print messages
Make better use of dev_err(), and catch an error where the transaction
creation might fail.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Thu, 18 Oct 2007 10:07:13 +0000 (03:07 -0700)]
I/OAT: clean up of dca provider start and stop
Don't start ioat_dca if ioat_dma didn't start, and then stop ioat_dca
before stopping ioat_dma. Since the ioat_dma side does the pci device
work, This takes care of ioat_dca trying to use a bad device reference.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Thu, 18 Oct 2007 10:07:12 +0000 (03:07 -0700)]
I/OAT: cleanup pci issues
Reorder the pci release actions
Letting go of the resources in the right order helps get rid of
occasional kernel complaints.
Fix the pci_driver object name [Randy Dunlap]
Rename the struct pci_driver data so that false section mismatch
warnings won't be produced.
Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Corey Minyard [Thu, 18 Oct 2007 10:07:11 +0000 (03:07 -0700)]
IPMI: fix hotmod remove lock
The removal of proc entries was done holding a lock, which is no longer
allowed. There is no need for the lock, only a mutex is required, so switch
over to a mutex.
Corey Minyard [Thu, 18 Oct 2007 10:07:10 +0000 (03:07 -0700)]
IPMI: new NMI handling
Convert over to the new NMI handling for getting IPMI watchdog timeouts via an
NMI. This add config options to know if there is the ability to receive NMIs
and if it has an NMI post processing call. Then it modifies the IPMI watchdog
to take advantage of this so that it can know if an NMI comes in.
It also adds testing that the IPMI NMI watchdog works.
Corey Minyard [Thu, 18 Oct 2007 10:07:08 +0000 (03:07 -0700)]
IPMI: remove bogus semaphore from watchdog
Lockdep was giving an error when loading the IPMI watchdog module. It turns
out that if you try to claim a lock in a parameter handling routine, lockdep
won't see that lock as "static" yet because the module is not yet on the
module list, so it will complain.
However, the semaphore in question is completely unnecessary. So just remove
it.
Corey Minyard [Thu, 18 Oct 2007 10:07:08 +0000 (03:07 -0700)]
IPMI: don't init irq until ready
Patrick found a race at startup. Interrupts were being enabled for the IPMI
interface before the driver was really ready to handle them. This could
result in an oops if something was pending on the interface at startup and
interrupt were already enabled (technically shouldn't happen, but need to
cover for this in real life). So move the IRQ setup to the code that starts
the actual IPMI processing.
Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Patrick Schoeller <Patrick.Schoeller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralf Baechle [Thu, 18 Oct 2007 10:07:07 +0000 (03:07 -0700)]
Replace __attribute_pure__ with __pure
To be consistent with the use of attributes in the rest of the kernel
replace all use of __attribute_pure__ with __pure and delete the definition
of __attribute_pure__.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi [Thu, 18 Oct 2007 10:07:05 +0000 (03:07 -0700)]
fuse: add blksize field to fuse_attr
There are cases when the filesystem will be passed the buffer from a single
read or write call, namely:
1) in 'direct-io' mode (not O_DIRECT), read/write requests don't go
through the page cache, but go directly to the userspace fs
2) currently buffered writes are done with single page requests, but
if Nick's ->perform_write() patch goes it, it will be possible to
do larger write requests. But only if the original write() was
also bigger than a page.
In these cases the filesystem might want to give a hint to the app
about the optimal I/O size.
Allow the userspace filesystem to supply a blksize value to be returned by
stat() and friends. If the field is zero, it defaults to the old
PAGE_CACHE_SIZE value.
Miklos Szeredi [Thu, 18 Oct 2007 10:07:03 +0000 (03:07 -0700)]
fuse: add list of writable files to fuse_inode
Each WRITE request must carry a valid file descriptor. When a page is written
back from a memory mapping, the file through which the page was dirtied is not
available, so a new mechananism is needed to find a suitable file in
->writepage(s).
A list of fuse_files is added to fuse_inode. The file is removed from the
list in fuse_release().
This patch is in preparation for writable mmap support.
Miklos Szeredi [Thu, 18 Oct 2007 10:07:02 +0000 (03:07 -0700)]
fuse: support BSD locking semantics
It is trivial to add support for flock(2) semantics to the existing protocol,
by setting the lock owner field to the file pointer, and passing a new
FUSE_LK_FLOCK flag with the locking request.
Miklos Szeredi [Thu, 18 Oct 2007 10:07:00 +0000 (03:07 -0700)]
fuse: clean up open file passing in setattr
Clean up supplying open file to the setattr operation. In addition to being a
cleanup it prepares for the changes in the way the open file is passed to the
setattr method.
Miklos Szeredi [Thu, 18 Oct 2007 10:06:58 +0000 (03:06 -0700)]
fuse: fix race between getattr and write
Getattr and lookup operations can be running in parallel to attribute changing
operations, such as write and setattr.
This means, that if for example getattr was slower than a write, the cached
size attribute could be set to a stale value.
To prevent this race, introduce a per-filesystem attribute version counter.
This counter is incremented whenever cached attributes are modified, and the
incremented value stored in the inode.
Before storing new attributes in the cache, getattr and lookup check, using
the version number, whether the attributes have been modified during the
request's lifetime. If so, the returned attributes are not cached, because
they might be stale.
Thanks to Jakub Bogusz for the bug report and test program.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jakub Bogusz <jakub.bogusz@gemius.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Sandeen [Thu, 18 Oct 2007 10:06:57 +0000 (03:06 -0700)]
ext3: fix setup_new_group_blocks locking
setup_new_group_blocks() manipulates the group descriptor block bh under
the block_bitmap bh's lock. It shouldn't matter since nobody but resize
should be touching these blocks, but it's worth fixing up.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
C: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Sato [Thu, 18 Oct 2007 10:06:56 +0000 (03:06 -0700)]
ext3: support large blocksize up to PAGESIZE
This patch set supports large block size(>4k, <=64k) in ext3 just enlarging
the block size limit. But it is NOT possible to have 64kB blocksize on
ext3 without some changes to the directory handling code. The reason is
that an empty 64kB directory block would have a rec_len == (__u16)2^16 ==
0, and this would cause an error to be hit in the filesystem. The proposed
solution is treat 64k rec_len with a an impossible value like rec_len =
0xffff to handle this.
The Patch-set consists of the following 2 patches.
[1/2] ext3: enlarge blocksize
- Allow blocksize up to pagesize
[2/2] ext3: fix rec_len overflow
- prevent rec_len from overflow with 64KB blocksize
Now on 64k page ppc64 box runs with this patch set we could create a 64k
block size ext3, and able to handle empty directory block.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Thu, 18 Oct 2007 10:06:53 +0000 (03:06 -0700)]
powerpc: lock bitops
Add non-trivial lock bitops implementation for powerpc.
Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Thu, 18 Oct 2007 10:06:52 +0000 (03:06 -0700)]
mips: fix bitops
Documentation/atomic_ops.txt defines these primitives must contain a memory
barrier both before and after their memory operation. This is consistent with
the atomic ops implementation on mips.
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Thu, 18 Oct 2007 10:06:51 +0000 (03:06 -0700)]
alpha: lock bitops
Alpha can avoid one mb when acquiring a lock with test_and_set_bit_lock.
[bunk@kernel.org: alpha bitops.h must #include <asm/barrier.h>] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Thu, 18 Oct 2007 10:06:50 +0000 (03:06 -0700)]
alpha: fix bitops
Documentation/atomic_ops.txt defines these primitives must contain a memory
barrier both before and after their memory operation. This is consistent with
the atomic ops implementation on alpha.
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Satyam Sharma [Thu, 18 Oct 2007 10:06:38 +0000 (03:06 -0700)]
x86 msr driver: Misc cpuinit annotations
msr_class_cpu_callback() can be marked __cpuinit, being the notifier callback
for a __cpuinitdata notifier_block. So can be marked msr_device_create() too,
called only from the newly-__cpuinit msr_class_cpu_callback() or from
__init-marked msr_init().
Signed-off-by: Satyam Sharma <satyam@infradead.org> Cc: Andi Kleen <ak@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return of the present "do {} while" based stub definition of
register_hotcpu_notifier() cannot be checked. This makes the stub
asymmetric w.r.t. the real HOTPLUG_CPU=y implementation that is
int-returning. So let us redefine this to be consistent with the full
version. Also do the same for unregister_hotcpu_notifier().
We cannot define these as static inline functions due to an existing GCC
bug (#33172). So define as macros that return appropriately instead (int
'0' for the register_hotcpu_notifier case and void for
unregister_hotcpu_notifier).
Michael Neuling [Thu, 18 Oct 2007 10:06:37 +0000 (03:06 -0700)]
powerpc: add scaled time accounting
This adds POWERPC specific hooks for scaled time accounting.
POWER6 includes a SPURR register. The SPURR is based off the PURR register
but is scaled based on CPU frequency and issue rates. This gives a more
accurate account of the instructions used per task. The PURR and timebase
will be constant relative to the wall clock, irrespective of the CPU
frequency.
This implementation reads the SPURR register in account_system_vtime which
is only call called on context witch and hard and soft irq entry and exit.
The percentage of user and system time is then estimated using the ratio of
these accounted by the PURR. If the SPURR is not present, the PURR read.
An earlier implementation of this patch read the SPURR whenever the PURR
was read, which included the system call entry and exit path.
Unfortunately this showed a performance regression on lmbench runs, so was
re-implemented.
I've included the lmbench results here when run bare metal on POWER6. 1st
column is the unpatch results. 2nd column is the results using the below
patch and the 3rd is the % diff of these results from the base. 4th and
5th columns are the results and % differnce from the base using the older
patch (SPURR read in syscall entry/exit path).
This moves the new items to the end of the taskstats struct as
requested by Balbir and yourself.
Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Neuling [Thu, 18 Oct 2007 10:06:34 +0000 (03:06 -0700)]
Add scaled time to taskstats based process accounting
This adds items to the taststats struct to account for user and system
time based on scaling the CPU frequency and instruction issue rates.
Adds account_(user|system)_time_scaled callbacks which architectures
can use to account for time using this mechanism.
Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Thu, 18 Oct 2007 10:06:30 +0000 (03:06 -0700)]
Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.
Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk
Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Thu, 18 Oct 2007 10:06:28 +0000 (03:06 -0700)]
Char: rocket, remove potential leak in module_init
if (controller && !request_region) then we leaked a tty driver struct, fix it
by adding function deinit tail with goto-ing into it (and from other fail
paths too)
Jiri Slaby [Thu, 18 Oct 2007 10:06:26 +0000 (03:06 -0700)]
Char: rocket, fix dynamic_dev tty
- register_device unconditionally (non-pci dependent) to have also isa
devices in /dev
- unregister devices on module removal
- don't set TTY_DRIVER_DYNAMIC_DEV twice (removed the one dependent on some
macro)
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ferenc Wagner <wferi@niif.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log