[TFRC]: Rename dccp_rx_ to tfrc_rx_

This is in preparation for merging the new rx history code written by Gerrit Renker.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TFRC]: Make the rx history slab be global

This is in preparation for merging the new rx history code written by Gerrit Renker.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TFRC]: Rename tfrc_tx_hist to tfrc_tx_hist_slab, for consistency

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Introduce generic function to test for `data packets'

as per  RFC 4340, sec. 7.7.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TFRC]: Provide central source file and debug facility

This patch changes the tfrc_lib module in the following manner:

 (1) a dedicated tfrc source file to call the packet history &
     loss interval init/exit functions.
 (2) a dedicated tfrc_pr_debug macro with toggle switch `tfrc_debug'.

Commiter note: renamed tfrc_module.c to tfrc.c, and made CONFIG_IP_DCCP_CCID3
select IP_DCCP_TFRC_LIB.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ARP]: Consolidate some code in arp_req_set/delete_publc

The PROXY_ARP is set on devconfigs in a similar way in
both calls.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ARP]: Minus one level of ndentation in arp_req_delete

The same cleanup for deletion requests.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ARP]: Minus one level of indentation in arp_req_set

The ATF_PUBL requests are handled completely separate from
the others. Emphasize it with a separate function. This also
reduces the indentation level.

The same issue exists with the arp_delete_request, but
when I tried to make it in one patch diff produced completely
unreadable patch. So I split it into two, but they may be
done with one commit.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4] ROUTE: Convert rt_hash_lock_init() macro into function

There's no need in having this function exist in a form
of macro. Properly formatted function looks much better.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4] ROUTE: Clean up proc files creation.

The rt_cache, stats/rt_cache and rt_acct(optional) files
creation looks a bit messy. Clean this out and join them
to other proc-related functions under the proper ifdef.

The struct net * argument in a new function will help net
namespaces patches look nicer.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4] ROUTE: Collect proc-related functions together

The net/ipv4/route.c file declares some entries for proc
to dump some routing info. The reading functions are
scattered over this file - collect them together.

Besides, remove a useless IP_RT_ACCT_CPU macro.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETLINK]: Mark attribute construction exception unlikely

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP]: Only increment counter on first peek/recv

The previous move of the the UDP inDatagrams counter caused each
peek of the same packet to be counted separately.  This may be
undesirable.

This patch fixes this by adding a bit to sk_buff to record whether
this packet has already been seen through skb_recv_datagram.  We
then only increment the counter when the packet is seen for the
first time.

The only dodgy part is the fact that skb_recv_datagram doesn't have
a good way of returning this new bit of information.  So I've added
a new function __skb_recv_datagram that does return this and made
skb_recv_datagram a wrapper around it.

The plan is to eventually replace all uses of skb_recv_datagram with
this new function at which time it can be renamed its proper name.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP]: Restore missing inDatagrams increments

The previous move of the the UDP inDatagrams counter caused the
counting of encapsulated packets, SUNRPC data (as opposed to call)
packets and RXRPC packets to go missing.

This patch restores all of these.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP]: Avoid repeated counting of checksum errors due to peeking

Currently it is possible for two processes to peek on the same socket
and end up incrementing the error counter twice for the same packet.

This patch fixes it by making skb_kill_datagram return whether it
succeeded in unlinking the packet and only incrementing the counter
if it did.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding

The only difference in this case is that updating all.forwarding
causes the update in default.forwarding when done via proc, but
not via the system call.

Besides, this consolidates a good portion of code.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[INET]: Merge sys.net.ipv4.ip_forward and sys.net.ipv4.conf.all.forwarding

AFAIS these two entries should do the same thing - change the
forwarding state on ipv4_devconf and on all the devices.

I propose to merge the handlers together using ctl paths.

The inet_forward_change() is static after this and I move
it higher to be closer to other "propagation" helpers and
to avoid diff making patches based on { and } matching :)
i.e. - make them easier to read.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Use sysctl paths to register ipv6 sysctl tables

I have already done this for core, ipv4 and tr tables, so repeat this
for the ipv6 ones.

This makes the ipv6.ko smaller and creates the ground needed for net
namespaces support in ipv6.ko ssctls.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Make the ipv6/sysctl_net_ipv6.c compilation cleaner

Since this file is entirely enclosed with the
#ifdef CONFIG_SYSCTL/#endif pair, it's OK to move this
CONFIG_ into a Makefile.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Remove the empty net_table

I have removed all the entries from this table (core_table,
ipv4_table and tr_table), so now we can safely drop it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TR]: Use ctl paths to register net/token-ring/ table

The same thing for token-ring - use ctl paths and get
rid of external references on the tr_table.

Unfortunately, I couldn't split this patch into cleanup and
use-the-paths parts.

As a lame excuse I can say, that the cleanup is just moving
the tr_table from one file to another - closet to a single
variable, that this ctl table tunes. Since the source  file
becomes empty after the move, I remove it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Use ctl paths to register net/ipv4/ table

This is the same as I did for the net/core/ table in the
second patch in his series: use the paths and isolate the
whole table in the .c file.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Cleanup the sysctl_net_ipv4.c file

This includes several cleanups:

 * tune Makefile to compile out this file when SYSCTL=n. Now
   it looks like net/core/sysctl_net_core.c one;
 * move the ipv4_config to af_inet.c to exist all the time;
 * remove additional sysctl_ip_nonlocal_bind declaration
   (it is already declared in net/ip.h);
 * remove no nonger needed ifdefs from this file.

This is a preparation for using ctl paths for net/ipv4/
sysctl table.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Isolate the net/core/ sysctl table

Using ctl paths we can put all the stuff, related to net/core/
sysctl table, into one file and remove all the references on it.

As a good side effect this hides the "core_table" name from
the global scope :)

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Remove unneeded ifdefs from sysctl_net_core.c

This file is already compiled out when the SYSCTL=n, so
these ifdefs, that enclose the whole file, can be removed.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Select CONFIG_NETFILTER_NETLINK when needed

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: remove NF_CONNTRACK_ENABLED option

Remove the NF_CONNTRACK_ENABLED option. It was meant for a smoother upgrade
to nf_conntrack, people having reconfigured their kernel at least once since
ip_conntrack was removed will have the NF_CONNTRACK option already set.
People upgrading from older kernels have to reconfigure a lot anyway.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: update copyright

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: remove useless enqueue status codes

The queueing core doesn't care about the exact return value from
the queue handler, so there's no need to go through the trouble
of returning a meaningful value as long as we indicate an error.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: eliminate impossible switch case

We don't need a default case in nfqnl_build_packet_message(), the
copy_mode is validated when it is set. Tell the compiler about
the possible types and remove the default case. Saves 80b of
text on x86_64.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: use endianness-aware attribute functions

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: mark hash table __read_mostly

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: remove useless debugging

Originally I wanted to just remove the QDEBUG macro and use pr_debug, but
none of the messages seems worth keeping.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: kill useless wrapper

nfqnl_set_mode takes the queue lock and calls __nfqnl_set_mode. Just move
the code from __nfqnl_set_mode to nfqnl_set_mode since there is no other
user.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink: use RCU for queue instances hash

Use RCU for queue instances hash. Avoids multiple atomic operations
for each packet.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: fix checks in nfqnl_recv_config

The peer_pid must be checked in all cases when a queue exists, currently
it is not checked if for NFQA_CFG_QUEUE_MAXLEN when a NFQA_CFG_CMD
attribute exists in some cases. Same for the queue existance check,
which can cause a NULL pointer dereference.

Also consistently return -ENODEV for "queue not found". -ENOENT would
be better, but that is already used to indicate a queued skb id doesn't
exist.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: avoid unnecessary atomic operation

The sequence counter doesn't need to be an atomic_t, just move the increment
inside the locked section.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: remove annoying debugging message

Don't log "nf_hook: Verdict = QUEUE." message with NETFILTER_DEBUG=y.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_queue: clean up error paths

Move duplicated error handling to end of function and add a helper function
to release the device and module references from the queue entry.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: {nfnetlink,ip,ip6}_queue: kill issue_verdict

Now that issue_verdict doesn't need to free the queue entries anymore,
all it does is disable local BHs and call nf_reinject. Move the BH
disabling to the okfn invocation in nf_reinject and kill the
issue_verdict functions.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_queue: move list_head/skb/id to struct nf_info

Move common fields for queue management to struct nf_info and rename it
to struct nf_queue_entry. The avoids one allocation/free per packet and
simplifies the code a bit.

Alternatively we could add some private room at the tail, but since
all current users use identical structs this seems easier.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ip6_queue: resync dev-index based flushing

Resync dev_cmp to take bridge devices into account.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ip6_queue: deobfuscate entry lookups

A queue entry lookup currently looks like this:

ipq_find_dequeue_entry -> __ipq_find_dequeue_entry ->
__ipq_find_entry -> cmpfn -> id_cmp

Use simple open-coded list walking and kill the cmpfn for
ipq_find_dequeue_entry. Instead add it to ipq_flush (after
similar cleanups) and use ipq_flush for both complete flushes
and flushing entries related to a device.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ip_queue: deobfuscate entry lookups

A queue entry lookup currently looks like this:

ipq_find_dequeue_entry -> __ipq_find_dequeue_entry ->
__ipq_find_entry -> cmpfn -> id_cmp

Use simple open-coded list walking and kill the cmpfn for
ipq_find_dequeue_entry. Instead add it to ipq_flush (after
similar cleanups) and use ipq_flush for both complete flushes
and flushing entries related to a device.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: deobfuscate entry lookups

A queue entry lookup currently looks like this:

find_dequeue_entry -> __find_dequeue_entry ->
__find_entry -> cmpfn -> id_cmp

Use simple open-coded list walking and kill the cmpfn for
find_dequeue_entry. Instead add it to nfqnl_flush (after
similar cleanups) and use nfqnl_flush for both complete
flushes and flushing entries related to a device.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: {nf_netlink,ip,ip6}_queue: use list_for_each_entry

Use list_add_tail/list_for_each_entry instead of list_add and
list_for_each_prev as a preparation for switching to RCU.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_queue: move queueing related functions/struct to seperate header

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_queue: remove unused data pointer

Remove the data pointer from struct nf_queue_handler. It has never been used
and is useless for the only handler that really matters, nfnetlink_queue,
since the handler is shared between all instances.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_queue: make queue_handler const

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_queue: remove unnecessary hook existance check

We hold a module reference for each queued packet, so the hook that
queued the packet can't disappear. Also remove an obsolete  comment
stating the opposite.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_queue: minor cleanup

Clean up

if (x) y;

constructs. We've got nothing to hide :)

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Mark hooks __read_mostly

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Use nf_register_hooks for multiple registrations

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack_proto_icmp: kill extern declaration in .c file

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_ct_h323: remove ipv6 module dependency

nf_conntrack_h323 needs ip6_route_output for the call forwarding filter.
Add a ->route function to nf_afinfo and use that to avoid pulling in the
ipv6 module.

Fix the #ifdef for the IPv6 code while I'm at it - the IPv6 support is
only needed when IPv6 conntrack is enabled.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: xt_hashlimit: remove ip6tables module dependency

Switch from ipv6_find_hdr to ipv6_skip_exthdr to avoid pulling in ip6_tables
and ipv6 when only using it for IPv4.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: {ip,ip6}t_LOG: log GID

Log GID in addition to UID

Signed-off-by: Maciej Soltysiak <maciej.soltysiak@ae.poznan.pl>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: add rateest match

Add rate estimator match. The rate estimator match can match on
estimated rates by the RATEEST target. It supports matching on
absolute bps/pps values, comparing two rate estimators and matching
on the difference between two rate estimators.

This is what I use to route outgoing data connections from a FTP
server over two lines based on the  available bandwidth:

# estimate outgoing rates
iptables -t mangle -A POSTROUTING -o eth0 -j RATEEST --rateest-name eth0 \
                                                     --rateest-interval 250ms \
                                                     --rateest-ewma 0.5s
iptables -t mangle -A POSTROUTING -o ppp0 -j RATEEST --rateest-name ppp0 \
                                                     --rateest-interval 250ms \
                                                     --rateest-ewma 0.5s

# mark based on available bandwidth
iptables -t mangle -A BALANCE -m state --state NEW \
                              -m helper --helper ftp \
                              -m rateest --rateest-delta \
                                         --rateest1 eth0 \
                                         --rateest-bps1 2.5mbit \
                                         --rateest-gt \
                                         --rateest2 ppp0 \
                                         --rateest-bps2 2mbit \
                              -j CONNMARK --set-mark 0x1

iptables -t mangle -A BALANCE -m state --state NEW \
                              -m helper --helper ftp \
                              -m rateest --rateest-delta \
                                         --rateest1 ppp0 \
                                         --rateest-bps1 2mbit \
                                         --rateest-gt \
                                         --rateest2 eth0 \
                                         --rateest-bps2 2.5mbit \
                              -j CONNMARK --set-mark 0x2

iptables -t mangle -A BALANCE -j CONNMARK --restore-mark

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: add RATEEST target

Add new rate estimator target (using gen_estimator). In combination with
the rateest match (next patch) this can be used for load-based multipath
routing.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ip_tables: remove obsolete SAME target

Remove the ipt_SAME target as scheduled in feature-removal-schedule.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: IPv6 capable xt_TOS v1 target

Extends the xt_DSCP target by xt_TOS v1 to add support for selectively
setting and flipping any bit in the IPv4 TOS and IPv6 Priority fields.
(ipt_TOS and xt_DSCP only accepted a limited range of possible
values.)

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: IPv6 capable xt_tos v1 match

Extends the xt_dscp match by xt_tos v1 to add support for selectively
matching any bit in the IPv4 TOS and IPv6 Priority fields. (ipt_tos
and xt_dscp only accepted a limited range of possible values.)

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Merge ipt_TOS into xt_DSCP

Merge ipt_TOS into xt_DSCP.

Merge ipt_TOS (tos v0 target) into xt_DSCP. They both modify the same
field in the IPv4 header, so it seems reasonable to keep them in one
piece. This is part two of the implicit 4-patch series to move tos to
xtables and extend it by IPv6.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Merge ipt_tos into xt_dscp

Merge ipt_tos into xt_dscp.

Merge ipt_tos (tos v0 match) into xt_dscp. They both match on the same
field in the IPv4 header, so it seems reasonable to keep them in one
piece. This is part one of the implicit 4-patch series to move tos to
xtables and extend it by IPv6.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Constify include/net/dsfield.h

Constify include/net/dsfield.h

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Use lowercase names for matches in Kconfig

Unify netfilter match kconfig descriptions

Consistently use lowercase for matches in kconfig one-line
descriptions and name the match module.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ipt_addrtype: limit address type checking to an interface

Addrtype match has a new revision (1), which lets address type checking
limited to the interface the current packet belongs to. Either incoming
or outgoing interface can be used depending on the current hook. In the
FORWARD hook two maches should be used if both interfaces have to be checked.
The new structure is ipt_addrtype_info_v1.

Revision 0 lets older userspace programs use the match as earlier.
ipt_addrtype_info is used.

Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Add inet_dev_addr_type()

Address type search can be limited to an interface by
inet_dev_addr_type function.

Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: merge ipt_owner/ip6t_owner in xt_owner

xt_owner merges ipt_owner and ip6t_owner, and adds a flag to match
on socket (non-)existence.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: remove obsolete overflow check

We're not multiplying the size with the number of CPUs anymore, so the
check is obsolete.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: struct xt_table_info diet

Instead of using a big array of NR_CPUS entries, we can compute the size
needed at runtime, using nr_cpu_ids

This should save some ram (especially on David's machines where NR_CPUS=4096 :
32 KB can be saved per table, and 64KB for dynamically allocated ones (because
of slab/slub alignements) )

In particular, the 'bootstrap' tables are not any more static (in data
section) but on stack as their size is now very small.

This also should reduce the size used on stack in compat functions
(get_info() declares an automatic variable, that could be bigger than kernel
stack size for big NR_CPUS)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: consistent and unique symbol names

Give all Netfilter modules consistent and unique symbol names.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: replace list_for_each with list_for_each_entry

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: add TCPOPTSTRIP target

Signed-off-by: Sven Schnelle <svens@bitebene.org>
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: netns compilation speedup

This patch speedups compilation when net_namespace.h is changed.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETLINK]: af_netlink.c checkpatch cleanups

Fix large number of checkpatch errors.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Use the correct family for input state lookup

When merging the input paths of IPsec I accidentally left a hard-coded
AF_INET for the state lookup call.  This broke IPv6 obviously.  This
patch fixes by getting the input callers to specify the family through
skb->cb.

Credit goes to Kazunori Miyazawa for diagnosing this and providing an
initial patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP]: Counter increment should be in USER mode for recvmsg

System calls should be USER. So change the BH to USER for
UDP*_INC_STATS_BH().

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP]: Clean up for IS_UDPLITE macro

Since we have macro IS_UDPLITE, we can use it.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP]: Defer InDataGrams increment until recvmsg() does checksum

Thanks dave, herbert, gerrit, andi and other people for your
discussion about this problem.

UdpInDatagrams can be confusing because it counts packets that
might be dropped later.
Move UdpInDatagrams into recvmsg() as allowed by the RFC.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Abstract tp->highest_sack accessing & point to next skb

Pointing to the next skb is necessary to avoid referencing
already SACKed skbs which will soon be on a separate list.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Cleanup local variables of clean_rtx_queue

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Add unlikely() to urgent handling in clean_rtx_queue

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Remove duplicated code block from clean_rtx_queue

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Add tcp_for_write_queue_from_safe and use it in mtu_probe

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Remove local variable and use packets_in_flight directly

Lines won't be that long and it's compiler's job to optimize
them.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: MTUprobe: prepare skb fields earlier

They better be valid when call to write_queue functions is made
once things that follow are going in.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Cong.ctrl modules: remove unused good_ack from cong_avoid

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Unite identical code from two seqno split blocks

Bogus seqno compares just mislead, the code is identical for
both sides of the seqno compare (and was even executed just
once because of return in between).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Remove superflucious FLAG_DATA_SACKED

To get there, highest_sack must have advanced. When it advances,
a new skb is SACKed, which already sets that FLAG. Besides, the
original purpose of it has puzzled me, never understood why
LOST bit setting of retransmitted skb is marked with
FLAG_DATA_SACKED.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Move LOSTRETRANS MIB outside !(L|S) check

Usually those skbs will have L set, not counting them as lost
retransmissions is misleading.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Use ctl paths to register addrconf sysctls

This looks very much like the patch for ipv4's devinet.

This is also intended to help us with the net namespaces
and saves the ipv6.ko size by ~320 bytes.

The difference from the first version is just the patch
offsets, that changed due to changes in the patch #2.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Unify and cleanup calls to addrconf_sysctl_register

Currently this call is (ab)used similar to devinet one - it
registers sysctls for devices and for the "default" confs, while
the "all" sysctls are registered separately. But unlike its
devinet brother, the passed inet6_device is needed.

The fix is to make a __addrconf_sysctl_register(), which registers
sysctls for all "devices" we need, including "default" and "all" :)

The original addrconf_sysctl_register() calls the introduced
function, passing the inet6_device, device name and ifindex (to
be used as procname and ctl_name) into it.

Thanks to Herbert again for pointing out, that we can shrink the
argument list to 1 :)

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Use ctl paths to register devinet sysctls

This looks very much like the patch for neighbors.

The path is also located on the stack and is prepared
inside the function. This time, the call to the registering
function is guarded with the RTNL lock, but I decided
to keep it on the stack not to litter the devinet.c file
with unneeded names and to make it look similar to the
neighbors code.

This is also intended to help us with the net namespaces
and saves the vmlinux size as well - this time by more
than 670 bytes.

The difference from the first version is just the patch
offsets, that changed due to changes in the patch #2.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: Unify and cleanup calls to devinet_sysctl_register

Currently this call is used to register sysctls for devices
and for the "default" confs. The "all" sysctls are registered
separately.

Besides, the inet_device is passed to this function, but it is
not needed there at all - just the device name and ifindex are
required.

Thanks to Herbert, who noticed, that this call doesn't even
require the devconf pointer (the last argument) - all we need
we can take from the in_device itself.

The fix is to make a __devinet_sysctl_register(), which registers
sysctls for all "devices" we need, including "default" and "all" :)

The original devinet_sysctl_register() works with struct net_device,
not the inet_device, and calls the introduced function, passing
the device name and ifindex (to be used as procname and ctl_name)
into it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

softmac: mark as obsolete and schedule for removal

Schedule softmac for for removal in the 2.6.26 development window.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bcm43xx: mark as obsolete and schedule for removal

Schedule bcm43xx for for removal in the 2.6.26 development window.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: remove "bcn_int" and "capab" scan results info

These bits were dead code before "mac80211: Remove local->scan_flags"
(commit 6681dd3fd0e4d36a4547415853e83411baa7b705) and probably should
have been removed as part of that commit.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: move A-MSDU identifier to flags

This patch moves u8 amsdu_frame in ieee80211_txrx_data to the flags
section as IEEE80211_TXRXD_RX_AMSDU

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: adding 802.11n configuration flows

This patch configures the 802.11n mode of operation
internally in ieee80211_conf structure and in the low-level
driver as well (through op conf_ht).
It does not include AP configuration flows.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>