Nick Fedchik [Mon, 12 Jun 2006 03:56:02 +0000 (20:56 -0700)]
[IRDA]: irda-usb.c: STIR421x cleanups
This cleans the STIR421x part of the irda-usb code. We also no longer
try to load all existing firmwares but only the matching one
(according to the USB id we get from the dongle).
Signed-off-by: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 9 Jun 2006 23:11:27 +0000 (16:11 -0700)]
[NET] ppp: Remove unnecessary pskb_may_pull
In ppp_receive_nonmp_frame, we call pskb_may_pull(skb, skb->len) if the
tailroom is >= 124. This is pointless because this pskb_may_pull is only
needed if the skb is non-linear. However, if it is non-linear then the
tailroom would be zero.
So it can be safely removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 9 Jun 2006 23:10:40 +0000 (16:10 -0700)]
[NET]: Clean up skb_linearize
The linearisation operation doesn't need to be super-optimised. So we can
replace __skb_linearize with __pskb_pull_tail which does the same thing but
is more general.
Also, most users of skb_linearize end up testing whether the skb is linear
or not so it helps to make skb_linearize do just that.
Some callers of skb_linearize also use it to copy cloned data, so it's
useful to have a new function skb_linearize_cow to copy the data if it's
either non-linear or cloned.
Last but not least, I've removed the gfp argument since nobody uses it
anymore. If it's ever needed we can easily add it back.
Misc bugs fixed by this patch:
* via-velocity error handling (also, no SG => no frags)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 9 Jun 2006 19:20:56 +0000 (12:20 -0700)]
[NET]: Add netif_tx_lock
Various drivers use xmit_lock internally to synchronise with their
transmission routines. They do so without setting xmit_lock_owner.
This is fine as long as netpoll is not in use.
With netpoll it is possible for deadlocks to occur if xmit_lock_owner
isn't set. This is because if a printk occurs while xmit_lock is held
and xmit_lock_owner is not set can cause netpoll to attempt to take
xmit_lock recursively.
While it is possible to resolve this by getting netpoll to use
trylock, it is suboptimal because netpoll's sole objective is to
maximise the chance of getting the printk out on the wire. So
delaying or dropping the message is to be avoided as much as possible.
So the only alternative is to always set xmit_lock_owner. The
following patch does this by introducing the netif_tx_lock family of
functions that take care of setting/unsetting xmit_lock_owner.
I renamed xmit_lock to _xmit_lock to indicate that it should not be
used directly. I didn't provide irq versions of the netif_tx_lock
functions since xmit_lock is meant to be a BH-disabling lock.
This is pretty much a straight text substitution except for a small
bug fix in winbond. It currently uses
netif_stop_queue/spin_unlock_wait to stop transmission. This is
unsafe as an IRQ can potentially wake up the queue. So it is safer to
use netif_tx_disable.
The hamradio bits used spin_lock_irq but it is unnecessary as
xmit_lock must never be taken in an IRQ handler.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
James Morris [Fri, 9 Jun 2006 07:33:33 +0000 (00:33 -0700)]
[SECMARK]: Add new packet controls to SELinux
Add new per-packet access controls to SELinux, replacing the old
packet controls.
Packets are labeled with the iptables SECMARK and CONNSECMARK targets,
then security policy for the packets is enforced with these controls.
To allow for a smooth transition to the new controls, the old code is
still present, but not active by default. To restore previous
behavior, the old controls may be activated at runtime by writing a
'1' to /selinux/compat_net, and also via the kernel boot parameter
selinux_compat_net. Switching between the network control models
requires the security load_policy permission. The old controls will
probably eventually be removed and any continued use is discouraged.
With this patch, the new secmark controls for SElinux are disabled by
default, so existing behavior is entirely preserved, and the user is
not affected at all.
It also provides a config option to enable the secmark controls by
default (which can always be overridden at boot and runtime). It is
also noted in the kconfig help that the user will need updated
userspace if enabling secmark controls for SELinux and that they'll
probably need the SECMARK and CONNMARK targets, and conntrack protocol
helpers, although such decisions are beyond the scope of kernel
configuration.
Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
James Morris [Fri, 9 Jun 2006 07:32:39 +0000 (00:32 -0700)]
[SECMARK]: Add CONNSECMARK xtables target
Add a new xtables target, CONNSECMARK, which is used to specify rules
for copying security marks from packets to connections, and for
copyying security marks back from connections to packets. This is
similar to the CONNMARK target, but is more limited in scope in that
it only allows copying of security marks to and from packets, as this
is all it needs to do.
A typical scenario would be to apply a security mark to a 'new' packet
with SECMARK, then copy that to its conntrack via CONNMARK, and then
restore the security mark from the connection to established and
related packets on that connection.
Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
James Morris [Fri, 9 Jun 2006 07:31:46 +0000 (00:31 -0700)]
[SECMARK]: Add secmark support to conntrack
Add a secmark field to IP and NF conntracks, so that security markings
on packets can be copied to their associated connections, and also
copied back to packets as required. This is similar to the network
mark field currently used with conntrack, although it is intended for
enforcement of security policy rather than network policy.
Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
James Morris [Fri, 9 Jun 2006 07:29:17 +0000 (00:29 -0700)]
[SECMARK]: Add secmark support to core networking.
Add a secmark field to the skbuff structure, to allow security subsystems to
place security markings on network packets. This is similar to the nfmark
field, except is intended for implementing security policy, rather than than
networking policy.
This patch was already acked in principle by Dave Miller.
Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
James Morris [Fri, 9 Jun 2006 07:27:28 +0000 (00:27 -0700)]
[SECMARK]: Add new flask definitions to SELinux
Secmark implements a new scheme for adding security markings to
packets via iptables, as well as changes to SELinux to use these
markings for security policy enforcement. The rationale for this
scheme is explained and discussed in detail in the original threads:
Examples of policy and rulesets, as well as a full archive of patches
for iptables and SELinux userland, may be found at:
http://people.redhat.com/jmorris/selinux/secmark/
The code has been tested with various compilation options and in
several scenarios, including with 'complicated' protocols such as FTP
and also with the new generic conntrack code with IPv6 connection
tracking.
This patch:
Add support for a new object class ('packet'), and associated
permissions ('send', 'recv', 'relabelto'). These are used to enforce
security policy for network packets labeled with SECMARK, and for
adding labeling rules.
Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[SELINUX]: add security class for appletalk sockets
Add a security class for appletalk sockets so that they can be
distinguished in SELinux policy. Please apply.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Catherine Zhang [Fri, 9 Jun 2006 06:39:49 +0000 (23:39 -0700)]
[LSM-IPsec]: SELinux Authorize
This patch contains a fix for the previous patch that adds security
contexts to IPsec policies and security associations. In the previous
patch, no authorization (besides the check for write permissions to
SAD and SPD) is required to delete IPsec policies and security
assocations with security contexts. Thus a user authorized to change
SAD and SPD can bypass the IPsec policy authorization by simply
deleteing policies with security contexts. To fix this security hole,
an additional authorization check is added for removing security
policies and security associations with security contexts.
Note that if no security context is supplied on add or present on
policy to be deleted, the SELinux module allows the change
unconditionally. The hook is called on deletion when no context is
present, which we may want to change. At present, I left it up to the
module.
LSM changes:
The patch adds two new LSM hooks: xfrm_policy_delete and
xfrm_state_delete. The new hooks are necessary to authorize deletion
of IPsec policies that have security contexts. The existing hooks
xfrm_policy_free and xfrm_state_free lack the context to do the
authorization, so I decided to split authorization of deletion and
memory management of security data, as is typical in the LSM
interface.
Use:
The new delete hooks are checked when xfrm_policy or xfrm_state are
deleted by either the xfrm_user interface (xfrm_get_policy,
xfrm_del_sa) or the pfkey interface (pfkey_spddelete, pfkey_delete).
SELinux changes:
The new policy_delete and state_delete functions are added.
Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com> Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Schwab [Tue, 6 Jun 2006 04:21:57 +0000 (21:21 -0700)]
[CONNECTOR]: Fix warning in cn_queue.c
cn_queue.c:130: warning: value computed is not used
There is no point in testing the atomic value if the result is thrown
away.
From Evgeniy:
It was created to put implicit smp barrier, but it is not needed there.
Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Jun 2006 00:59:20 +0000 (17:59 -0700)]
[TCP]: Fix compile warning in tcp_probe.c
The suseconds_t et al. are not necessarily any particular type on
every platform, so cast to unsigned long so that we can use one printf
format string and avoid warnings across the board
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a new module for tracking TCP state variables non-intrusively
using kprobes. It has a simple /proc interface that outputs one line
for each packet received. A sample usage is to collect congestion
window and ssthresh over time graphs.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Many of the TCP congestion methods all just use ssthresh
as the minimum congestion window on decrease. Rather than
duplicating the code, just have that be the default if that
handle in the ops structure is not set.
Minor behaviour change to TCP compound. It probably wants
to use this (ssthresh) as lower bound, rather than ssthresh/2
because the latter causes undershoot on loss.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The original code did a 64 bit divide directly, which won't work on
32 bit platforms. Rather than doing a 64 bit square root twice,
just implement a 4th root function in one pass using Newton's method.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
TCP Compound is a sender-side only change to TCP that uses
a mixed Reno/Vegas approach to calculate the cwnd.
For further details look here:
ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdf
Signed-off-by: Angelo P. Castellani <angelo.castellani@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Bin Zhou [Tue, 6 Jun 2006 00:28:30 +0000 (17:28 -0700)]
[TCP]: TCP Veno congestion control
TCP Veno module is a new congestion control module to improve TCP
performance over wireless networks. The key innovation in TCP Veno is
the enhancement of TCP Reno/Sack congestion control algorithm by using
the estimated state of a connection based on TCP Vegas. This scheme
significantly reduces "blind" reduction of TCP window regardless of
the cause of packet loss.
This work is based on the research paper "TCP Veno: TCP Enhancement
for Transmission over Wireless Access Networks." C. P. Fu, S. C. Liew,
IEEE Journal on Selected Areas in Communication, Feb. 2003.
Original paper and many latest research works on veno:
http://www.ntu.edu.sg/home/ascpfu/veno/veno.html
Signed-off-by: Bin Zhou <zhou0022@ntu.edu.sg>
Cheng Peng Fu <ascpfu@ntu.edu.sg> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
TCP Low Priority is a distributed algorithm whose goal is to utilize only
the excess network bandwidth as compared to the ``fair share`` of
bandwidth as targeted by TCP. Available from:
http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf
Original Author:
Aleksandar Kuzmanovic <akuzma@northwestern.edu>
See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation.
As of 2.6.13, Linux supports pluggable congestion control algorithms.
Due to the limitation of the API, we take the following changes from
the original TCP-LP implementation:
o We use newReno in most core CA handling. Only add some checking
within cong_avoid.
o Error correcting in remote HZ, therefore remote HZ will be keeped
on checking and updating.
o Handling calculation of One-Way-Delay (OWD) within rtt_sample, sicne
OWD have a similar meaning as RTT. Also correct the buggy formular.
o Handle reaction for Early Congestion Indication (ECI) within
pkts_acked, as mentioned within pseudo code.
o OWD is handled in relative format, where local time stamp will in
tcp_time_stamp format.
Port from 2.4.19 to 2.6.16 as module by:
Wong Hoi Sing Edison <hswong3i@gmail.com>
Hung Hing Lun <hlhung3i@gmail.com>
Signed-off-by: Wong Hoi Sing Edison <hswong3i@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Tue, 30 May 2006 01:27:32 +0000 (18:27 -0700)]
[NETFILTER]: PPTP helper: fixup gre_keymap_lookup() return type
GRE keys are 16-bit wide.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 30 May 2006 01:27:09 +0000 (18:27 -0700)]
[NETFILTER]: Add SIP connection tracking helper
Add SIP connection tracking helper. Originally written by
Christian Hentschel <chentschel@arnet.com.ar>, some cleanup, minor
fixes and bidirectional SIP support added by myself.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 30 May 2006 01:26:47 +0000 (18:26 -0700)]
[NETFILTER]: H.323 helper: replace internal_net_addr parameter by routing-based heuristic
Call Forwarding doesn't need to create an expectation if both peers can
reach each other without our help. The internal_net_addr parameter
lets the user explicitly specify a single network where this is true,
but is not very flexible and even fails in the common case that calls
will both be forwarded to outside parties and inside parties. Use an
optional heuristic based on routing instead, the assumption is that
if bpth the outgoing device and the gateway are equal, both peers can
reach each other directly.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jing Min Zhao [Tue, 30 May 2006 01:26:27 +0000 (18:26 -0700)]
[NETFILTER]: H.323 helper: Add support for Call Forwarding
Signed-off-by: Jing Min Zhao <zhaojingmin@users.sourceforge.net> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 30 May 2006 01:25:58 +0000 (18:25 -0700)]
[NETFILTER]: amanda helper: convert to textsearch infrastructure
When a port number within a packet is replaced by a differently sized
number only the packet is resized, but not the copy of the data.
Following port numbers are rewritten based on their offsets within
the copy, leading to packet corruption.
Convert the amanda helper to the textsearch infrastructure to avoid
the copy entirely.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 28 May 2006 06:06:13 +0000 (23:06 -0700)]
[IPSEC] proto: Move transport mode input path into xfrm_mode_transport
Now that we have xfrm_mode objects we can move the transport mode specific
input decapsulation code into xfrm_mode_transport. This removes duplicate
code as well as unnecessary header movement in case of tunnel mode SAs
since we will discard the original IP header immediately.
This also fixes a minor bug for transport-mode ESP where the IP payload
length is set to the correct value minus the header length (with extension
headers for IPv6).
Of course the other neat thing is that we no longer have to allocate
temporary buffers to hold the IP headers for ESP and IPComp.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 28 May 2006 06:03:58 +0000 (23:03 -0700)]
[IPSEC] xfrm: Undo afinfo lock proliferation
The number of locks used to manage afinfo structures can easily be reduced
down to one each for policy and state respectively. This is based on the
observation that the write locks are only held by module insertion/removal
which are very rare events so there is no need to further differentiate
between the insertion of modules like ipv6 versus esp6.
The removal of the read locks in xfrm4_policy.c/xfrm6_policy.c might look
suspicious at first. However, after you realise that nobody ever takes
the corresponding write lock you'll feel better :)
As far as I can gather it's an attempt to guard against the removal of
the corresponding modules. Since neither module can be unloaded at all
we can leave it to whoever fixes up IPv6 unloading :)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 27 May 2006 00:48:07 +0000 (17:48 -0700)]
[TG3]: Add recovery logic when MMIOs are re-ordered
Add recovery logic when we suspect that the system is re-ordering
MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx
completions and hit BUG_ON() in the tx completion path.
tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs
that must be strictly ordered (such as the send mailbox). Determining
when to enable the flush is currently a manual process of adding known
chipsets to a list.
The new code replaces the BUG_ON() in the tx completion path with the
call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER
flag and reset the chip later in the workqueue to recover and start
flushing MMIOs to the mailbox.
A message to report the problem will be printed. We will then decide
whether or not to add the host bridge to the list of chipsets that do
re-ordering.
We may add some additional code later to print the host bridge's ID so
that the user can report it more easily.
The assumption that re-ordering can only happen on x86 systems is also
removed.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Samuel Ortiz [Thu, 25 May 2006 23:19:22 +0000 (16:19 -0700)]
[IRDA]: Initial support for MCS7780 based dongles
The MosChip MCS7780 chipset is an IrDA USB bridge that
doesn't conform with the IrDA-USB standard and thus needs
its separate driver.
Tested on an actual MCS7780 based dongle.
Original implementation by Brian Pugh <bpugh@cs.pdx.edu>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 May 2006 23:11:14 +0000 (16:11 -0700)]
[TCP]: tcp_rcv_rtt_measure_ts() call in pure-ACK path is superfluous
We only want to take receive RTT mesaurements for data
bearing frames, here in the header prediction fast path
for a pure-sender, we know that we have a pure-ACK and
thus the checks in tcp_rcv_rtt_mesaure_ts() will not pass.
Signed-off-by: David S. Miller <davem@davemloft.net>
[LLC]: allow applications to get copy of kernel datagrams
It is legal for an application to bind to a SAP that is also being
used by the kernel. This happens if the bridge module binds to the
STP SAP, and the user wants to have a daemon for STP as well.
It is possible to have kernel doing STP on one bridge, but
let application do RSTP on another bridge.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
LLC receive is broken for SOCK_DGRAM.
If an application does recv() on a datagram socket and there
is no data present, don't return "not connected". Instead, just
do normal datagram semantics.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Morton [Thu, 25 May 2006 20:26:53 +0000 (13:26 -0700)]
[I/OAT]: Do not use for_each_cpu().
for_each_cpu() is going away (and is gone in -mm).
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 15 Jun 2006 11:15:44 +0000 (21:15 +1000)]
[PATCH] powerpc: Fix 64k pages on non-partitioned machines
The page size encoding passed to tlbie is incorrect for new-style
large pages. This fixes it. This doesn't affect anything on older
machines because mmu_psize_defs[psize].penc (the page size encoding)
is 0 for 4k and 16M pages (the two are distinguished by a separate "is
a large page" bit).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov [Thu, 15 Jun 2006 16:12:02 +0000 (20:12 +0400)]
[PATCH] arm_timer: remove a racy and obsolete PF_EXITING check
arm_timer() checks PF_EXITING to prevent BUG_ON(->exit_state)
in run_posix_cpu_timers().
However, for some reason it does so only for CPUCLOCK_PERTHREAD
case (which is imho wrong).
Also, this check is not reliable, PF_EXITING could be set on
another cpu without any locks/barriers just after the check,
so it can't prevent from attaching the timer to the exiting
task.
Oleg Nesterov [Thu, 15 Jun 2006 16:11:43 +0000 (20:11 +0400)]
[PATCH] run_posix_cpu_timers: remove a bogus BUG_ON()
do_exit() clears ->it_##clock##_expires, but nothing prevents
another cpu to attach the timer to exiting process after that.
arm_timer() tries to protect against this race, but the check
is racy.
After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and
before do_exit() calls 'schedule() local timer interrupt can find
tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu
does sys_wait4) interrupted task has ->signal == NULL.
At this moment exiting task has no pending cpu timers, they were
cleanuped in __exit_signal()->posix_cpu_timers_exit{,_group}(),
so we can just return from irq.
Oleg Nesterov [Thu, 15 Jun 2006 16:11:15 +0000 (20:11 +0400)]
[PATCH] check_process_timers: fix possible lockup
If the local timer interrupt happens just after do_exit() sets PF_EXITING
(and before it clears ->it_xxx_expires) run_posix_cpu_timers() will call
check_process_timers() with tasklist_lock + ->siglock held and
check_process_timers:
t = tsk;
do {
....
do {
t = next_thread(t);
} while (unlikely(t->flags & PF_EXITING));
} while (t != tsk);
the outer loop will never stop.
Actually, the window is bigger. Another process can attach the timer
after ->it_xxx_expires was cleared (see the next commit) and the 'if
(PF_EXITING)' check in arm_timer() is racy (see the one after that).
A couple of fixes that should prevent crashes when using netconsole and
suspend/resume. First, netconsole poll routine shouldn't run unless the
device is up; second, the NAPI poll should be disabled during suspend.
This is only an issue on sky2, because it has to have one NAPI poll
routine for both ports on dual port boards. Normal drivers use
netif_rx_schedule_prep and that checks for netif_running.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jens Axboe [Fri, 16 Jun 2006 11:02:29 +0000 (13:02 +0200)]
[PATCH] Fix missing ret assignment in __bio_map_user() error path
If get_user_pages() returns less pages than what we asked for, we jump
to out_unmap which will return ERR_PTR(ret). But ret can contain a
positive number just smaller than local_nr_pages, so be sure to set it
to -EFAULT always.
Problem found and diagnosed by Damien Le Moal <damien@sdl.hitachi.co.jp>
Jens Axboe [Fri, 16 Jun 2006 05:46:37 +0000 (07:46 +0200)]
[PATCH] fix cdrom open
Some time ago the cdrom open routine was changed so that we call the
driver's open routine before checking to see if it is read only. However,
if we discovered that a read write open was not possible and the open
flags required a writable open, we just returned -EROFS without calling
the driver's release routine. This seems to work for most cdrom drivers,
but breaks the Powerpc iSeries virtual cdrom rather badly.
This just inserts the release call in the error path to balance the call
to "->open()" done by "open_for_data()".
Jens Axboe [Wed, 14 Jun 2006 17:11:57 +0000 (19:11 +0200)]
[PATCH] cfq-iosched: fix crash in do_div()
We don't clear the seek stat values in cfq_alloc_io_context(), and if
->seek_mean is unlucky enough to be set to -36 by chance, the first
invocation of cfq_update_io_seektime() will oops with a divide by zero
in do_div().
Just memset the entire cic instead of filling invididual values
independently.
[PATCH] sky2: stop/start hardware idle timer on suspend/resume
The resume bug was caused not by an early interrupt but because the idle
timeout was not being stopped on suspend. Also disable hardware IRQ's
on suspend. Will need to revisit this with hotplug?
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The set power state function is cleaner if it doesn't return anything.
The only caller that could fail is in suspend() and it can check the argument
there.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Mon, 12 Jun 2006 22:13:40 +0000 (15:13 -0700)]
[PATCH] alpha: generic hweight build fix
From: Randy Dunlap <rdunlap@xenotime.net>
According to include/asm-alpha/bitops.h, only ALPHA_EV67 has hardware
hweight support, so ALPHA_EV6 needs to use GENERIC_HWEIGHT.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ernst Herzberg <earny@net4u.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6 / log