Paul Mackerras [Wed, 4 Oct 2006 06:47:49 +0000 (16:47 +1000)]
[POWERPC] Lazy interrupt disabling for 64-bit machines
This implements a lazy strategy for disabling interrupts. This means
that local_irq_disable() et al. just clear the 'interrupts are
enabled' flag in the paca. If an interrupt comes along, the interrupt
entry code notices that interrupts are supposed to be disabled, and
clears the EE bit in SRR1, clears the 'interrupts are hard-enabled'
flag in the paca, and returns. This means that interrupts only
actually get disabled in the processor when an interrupt comes along.
When interrupts are enabled by local_irq_enable() et al., the code
sets the interrupts-enabled flag in the paca, and then checks whether
interrupts got hard-disabled. If so, it also sets the EE bit in the
MSR to hard-enable the interrupts.
This has the potential to improve performance, and also makes it
easier to make a kernel that can boot on iSeries and on other 64-bit
machines, since this lazy-disable strategy is very similar to the
soft-disable strategy that iSeries already uses.
This version renames paca->proc_enabled to paca->soft_enabled, and
changes a couple of soft-disables in the kexec code to hard-disables,
which should fix the crash that Michael Ellerman saw. This doesn't
yet use a reserved CR field for the soft_enabled and hard_enabled
flags. This applies on top of Stephen Rothwell's patches to make it
possible to build a combined iSeries/other kernel.
Anton Blanchard [Fri, 13 Oct 2006 02:17:16 +0000 (12:17 +1000)]
[POWERPC] Better check in show_instructions
Instead of just checking that an address is in the right range, use the
provided __kernel_text_address() helper which covers both the kernel and
module text sections.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Fri, 13 Oct 2006 01:41:00 +0000 (11:41 +1000)]
[POWERPC] Never panic when taking altivec exceptions from userspace
At the moment we rely on a cpu feature bit or a firmware property to
detect altivec. If we dont have either of these and the cpu does in fact
support altivec we can cause a panic from userspace.
It seems safer to always send a signal if we manage to get an 0xf20
exception from userspace.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Randy Vinson [Thu, 12 Oct 2006 20:36:23 +0000 (13:36 -0700)]
[POWERPC] Fix IO Window Updates on P2P bridges.
When update_bridge_base() updates the IO window on a PCI-to-PCI
bridge, it fails to zero the upper 16 bits of the base and limit
registers if the window size is less than 64K. This fixes it.
Kumar Gala [Wed, 11 Oct 2006 07:06:59 +0000 (02:06 -0500)]
[POWERPC] ppc: Add missing calls to set_irq_regs
In the timer_interrupt we were not calling set_irq_regs() and if we are
profiling we will end up calling get_irq_regs(). This causes bad things to
happen.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Eric Sesterhenn [Tue, 10 Oct 2006 21:37:29 +0000 (14:37 -0700)]
[POWERPC] Off-by-one in /arch/ppc/platforms/mpc8*
A find -iname \*.[ch] | xargs grep "> ARRAY_SIZE(" revealed several
incorrect usages of ARRAY_SIZE in the mpc drivers. The last element in the
array is always ARRAY_SIZE()-1, this patch modifies the bounds checks
accordingly.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Timur Tabi [Tue, 10 Oct 2006 16:53:26 +0000 (11:53 -0500)]
[POWERPC] Add DOS partition table support to mpc834x_itx_defconfig
The default configuration file for the MPC8349E-mITX reference board,
mpc834x_itx_defconfig, did not include support for DOS partition table types.
This support is necessary because the hard drive that comes with the ITX
is formatted with this partition table type. Without this config option,
no partitions on the drive can be mounted.
Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
[POWERPC] Don't crash on cell with 2 BEs when !CONFIG_NUMA
The SPU code will crash if CONFIG_NUMA is not set and SPUs are found on
a non-0 node. This workaround will ignore those SPEs and just print an
message in the kernel log.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Ulrich Drepper [Sun, 15 Oct 2006 19:03:48 +0000 (15:03 -0400)]
[PATCH] make UML compile (FC6/x86-64)
I need this patch to get a UML kernel to compile. This is with the
kernel headers in FC6 which are automatically generated from the kernel
tree. Some headers are missing but those files don't need them. At
least it appears so since the resuling kernel works fine.
Linus Torvalds [Sun, 15 Oct 2006 21:09:55 +0000 (14:09 -0700)]
Fix VM_MAYEXEC calculation
.. and clean up the file mapping code while at it. No point in having a
"if (file)" repeated twice, and generally doing similar checks in two
different sections of the same code
Petr Vandrovec [Fri, 13 Oct 2006 16:42:07 +0000 (18:42 +0200)]
[PATCH] Fix core files so they make sense to gdb...
It is silly to use non-static variable for writting zeroes to the file.
And more seriously, foffset in core dump file dump function was incremented
too much, so some parts of core dump were shifted by size of few phdrs and
notes down, so although gdb was able to load that file, it did not make lot
of sense - in my test case data pages were shifted down by about 900 bytes.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sun, 15 Oct 2006 18:01:53 +0000 (11:01 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (4750): AGC command1/2 is board specific
V4L/DVB (4748): Fixed oops for Nova-T USB2
V4L/DVB (4746): HM12 is YUV 4:2:0, not YUV 4:1:1
V4L/DVB (4744): The Samsung TCPN2121P30A does not have a tda9887
V4L/DVB (4743): Fix oops in VIDIOC_G_PARM
V4L/DVB (4742): Drivers/media/video: handle sysfs errors
V4L/DVB (4741): {ov511,stv680}: handle sysfs errors
V4L/DVB (4740): Fixed an if-block to avoid floating with debug-messages
V4L/DVB (4739): SECAM support for saa7113 into saa7115
V4L/DVB (4738): Bt8xx/dvb-bt8xx.c: check kmalloc() return value.
V4L/DVB (4734): Tda826x: fix frontend selection for dvb_attach
V4L/DVB (4733): Tda10086: fix frontend selection for dvb_attach
V4L/DVB (4732): Fix spelling error in Kconfig help text for DVB_CORE_ATTACH
V4L/DVB (4731a): Kconfig: restore pvrusb2 menu items
V4L/DVB (4729): Fix VIDIOC_G_FMT for NTSC in cx25840.
V4L/DVB (4727): Support status readout for saa713x based FM radio
V4L/DVB (4725): Fix vivi compile on parisc
V4L/DVB (4692): Add WinTV-HVR3000 DVB-T support
Al Viro [Sat, 14 Oct 2006 15:48:26 +0000 (16:48 +0100)]
[PATCH] new cifs endianness bugs
* missing cpu_to_le64() for ChangeTime (introduced by
[CIFS] Legacy time handling for Win9x and OS/2 part 1)
* missing le16_to_cpu() for DialectIndex (introduced by
[CIFS] Do not send newer QFSInfo to legacy servers which can not support it)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jiri Kosina [Tue, 10 Oct 2006 21:20:41 +0000 (14:20 -0700)]
ACPI: check battery status on resume for un/plug events during sleep
Add ->resume method to the ACPI battery handler to check
if the battery state has changed during sleep.
If yes, update the ACPI internal data structures
for benefit of /proc/acpi/battery/.
Signed-off-by: Jiri Kosina <jikos@jikos.cz> Cc: Stefan Seyfried <seife@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
Eiichiro Oiwa [Mon, 2 Oct 2006 15:18:03 +0000 (19:18 +0400)]
ACPICA: Fix incorrect handling of PCI Express Root Bridge _HID
I could not get correct PCI Express bus number from the structure of
acpi_object_extra. I always get zero as bus number regardless of bus
location. I found that there is incorrect comparison with _HID (PNP0A08) in
acpi/events/evrgnini.c and PCI Express _BBN method always fail.
Therefore, we always get zero as PCI Express bus number.
http://bugzilla.kernel.org/show_bug.cgi?id=7145
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Darren Jenkins [Tue, 10 Oct 2006 21:20:35 +0000 (14:20 -0700)]
ACPI: asus_acpi: fix proc files parsing
ICC complains about a "Pointless comparsion of unsigned interger with zero"
@ line 760 & 808 of asus_acpi.c
parse_arg() mentioned below returns -E but it's copied into unsigned variable...
Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
Kimball Murray [Tue, 10 Oct 2006 21:20:33 +0000 (14:20 -0700)]
ACPI: SCI interrupt source override
The Linux group at Stratus Technologies has come across an issue with SCI
routing under ACPI. We were bitten by this when we made an x86_64 platform
whose BIOS provides an Interrupt Source Override for the SCI itself.
Apparently the override has no effect for the System Control Interrupt, and
this appears to be because of the way the SCI is setup in the ACPI code.
It does not handle the case where busirq != gsi.
The code that sets up the SCI routing assumes that bus irq == global irq.
So there is simply no provision for telling it otherwise. The attached
patch provides this mechanism.
This patch provided by David Bulkow, was tested on an i386 platform, which
does not use the SCI override, and also on an x86_64 platform which does
use an override.
Signed-off-by: David Bulkow <david.bulkow@stratus.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
Randy Dunlap [Tue, 10 Oct 2006 21:20:32 +0000 (14:20 -0700)]
ACPI: fix printk format warnings
Fix printk format warnings in drivers/acpi:
drivers/acpi/tables/tbget.c:326: warning: format '%X' expects type 'unsigned int', but argument 5 has type 'long unsigned int'
drivers/acpi/tables/tbrsdt.c:189: warning: format '%X' expects type 'unsigned int', but argument 5 has type 'long unsigned int'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
Jiri Kosina [Thu, 24 Aug 2006 04:36:19 +0000 (00:36 -0400)]
ACPI: acpi_pci_link_set() can allocate with either GFP_ATOMIC or GFP_KERNEL
acpi_pci_link_set() allocates both with interrupts on
and with interrupts off (resume-time), so check interrupts
and decide on GFP_ATOMIC or GFP_KERNEL at run-time.
Signed-off-by: Jiri Kosina <jikos@jikos.cz> Signed-off-by: Len Brown <len.brown@intel.com>
ACPI: Remove deferred execution from global lock acquire wakeup path
On acquiring the ACPI global lock, if there were sleepers on the lock,
we used to use acpi_os_execute() to defer a thread which would signal
sleepers. Now just signal the semaphore directly.
MSI S270 Laptop support: backlight, wlan, bluetooth states
Create a driver to support the platform-specific features
of MSI S270 laptops (and maybe other MSI laptops).
This driver implements a backlight device for controlling LCD brightness
(/sys/class/backlight/msi-laptop-bl/).
In addition it allows access to the WLAN and Bluetooth states
through a platform driver (/sys/devices/platform/msi-laptop-pf/).
Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
These new functions take as arguments an ACPI EC command, a few bytes
to write to the EC data register and a buffer for a few bytes to read
from the EC data register. The old _read(), _write(), _query() are
just special cases of these functions.
Then unified the code in acpi_ec_poll_transaction() and
acpi_ec_intr_transaction() a little more. Both functions are now just
wrappers around the new acpi_ec_transaction_unlocked() function. The
latter contains the EC access logic, the two original
function now just do their special way of locking and call the the
new function for the actual work.
This saves a lot of very similar code. The primary reason for doing
this, however, is that my driver for MSI 270 laptops needs to issue
some non-standard EC commands in a safe way. Due to this I added a new
exported function similar to ec_write()/ec_write() which is called
ec_transaction() and is essentially just a wrapper around
acpi_ec_{poll,intr}_transaction().
Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
Intel processors starting with the Core Duo support
support processor native C-state using the MWAIT instruction.
Refer: Intel Architecture Software Developer's Manual
http://www.intel.com/design/Pentium4/manuals/253668.htm
Platform firmware exports the support for Native C-state to OS using
ACPI _PDC and _CST methods.
Refer: Intel Processor Vendor-Specific ACPI: Interface Specification
http://www.intel.com/technology/iapc/acpi/downloads/302223.htm
With Processor Native C-state, we use 'MWAIT' instruction on the processor
to enter different C-states (C1, C2, C3). We won't use the special IO
ports to enter C-state and no SMM mode etc required to enter C-state.
Overall this will mean better C-state support.
One major advantage of using MWAIT for all C-states is, with this and
"treat interrupt as break event" feature of MWAIT, we can now get accurate
timing for the time spent in C1, C2, .. states.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
Stefan Schmidt [Fri, 22 Sep 2006 10:19:16 +0000 (12:19 +0200)]
ACPI: ibm_acpi: Documentation the wan feature.
Document the wan feature Jeremy Fitzhardinge added to ibm_acpi.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Borislav Deianov <borislav@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
Stefan Schmidt [Fri, 22 Sep 2006 10:19:15 +0000 (12:19 +0200)]
ACPI: ibm_acpi: Update documentation for brightness and volume.
Document the change of the experimental flag for brightness and volume.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Borislav Deianov <borislav@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
Stefan Schmidt [Fri, 22 Sep 2006 10:19:14 +0000 (12:19 +0200)]
ACPI: ibm_acpi: Remove experimental status for brightness and volume.
The brightness and volume features from ibm-acpi are stable.
The experimental flag is no longer needed.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Borislav Deianov <borislav@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
Marek W [Tue, 15 Aug 2006 05:37:20 +0000 (22:37 -0700)]
ACPI: asus_acpi: W3000 support
Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under KDE
(it was triggering excessive LCD read error messages by querying asus_acpi
module) allowing people (I am probably the only one who tested this) with
W3000 to run kmilo.
Cc: Karol Kozimor <sziwan@hell.org.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
Jonathan Corbet [Fri, 13 Oct 2006 10:51:16 +0000 (07:51 -0300)]
V4L/DVB (4743): Fix oops in VIDIOC_G_PARM
The call to v4l2_std_construct() in the VIDIOC_G_PARM handler treats
vfd->current_norm as if it were an index - but it's not. The result is
an oops if the driver has no vidioc_g_parm() method defined. Here's the
fix.
Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Enrico Scholz [Mon, 9 Oct 2006 19:27:05 +0000 (16:27 -0300)]
V4L/DVB (4740): Fixed an if-block to avoid floating with debug-messages
The dbgarg() macro in videodev.c contains some printk() statements
where only the first one is influenced by an if-statement. This causes
floating with debug-messages which is fixed by this patch by adding a
'{ ... }' pair.
Pádraig Brady [Mon, 9 Oct 2006 11:02:17 +0000 (08:02 -0300)]
V4L/DVB (4739): SECAM support for saa7113 into saa7115
Without the attached trivial patch, the saa7113 is set up for PAL when SECAM
is selected and hence will see only show black and white for SECAM signals.
Tested the patch against the saa7115 module in linux-2.6.17 with a
Pinnacle 50e USB tuner (em28xx).
Check the return value of kmalloc() in function frontend_init(),
in file drivers/media/dvb/bt8xx/dvb-bt8xx.c.
Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4727): Support status readout for saa713x based FM radio
This patch adds readout for stereo and signal level for
saa713x cards which use the saa713x as FM demodulator.
These are many cards based on saa7133, tda8290 and tda8275a.
FM channel search should work now.
Franck Bui-Huu [Thu, 12 Oct 2006 19:06:33 +0000 (21:06 +0200)]
[PATCH] Fix up mmap_kmem
vma->vm_pgoff is an pfn _offset_ relatif to the begining
of the memory start. The previous code was doing at first:
vma->vm_pgoff << PAGE_SHIFT
which results into a wrong physical address since some
platforms have a physical mem start that can be different
from 0. After that the previous call __pa() on this
wrong physical address, however __pa() is used to convert
a _virtual_ address into a physical one.
This patch rewrites this convertion. It calculates the
pfn of PAGE_OFFSET which is the pfn of the mem start
then it adds the vma->vm_pgoff to it.
It also uses virt_to_phys() instead of __pa() since the
latter shouldn't be used by drivers.
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
[GFS2] Update git tree name/location
[DLM] fix iovec length in recvmsg
[GFS2] Pass the correct value to kunmap_atomic
[GFS2] Fix bug where lock not held
[DLM] Kconfig: don't show an empty DLM menu
[GFS2] Fix uninitialised variable
[GFS2] Fix a size calculation error
Petr Vandrovec [Fri, 13 Oct 2006 02:13:16 +0000 (04:13 +0200)]
[PATCH] Get core dump code to work...
The file based core dump code was broken by pipe changes - a relative
llseek returns the absolute file position on success, not the relative
one, so dump_seek() always failed when invoked with non-zero current
position.
Only success/failure can be tested with relative lseek, we have to trust
kernel that on success we've got right file offset. With this fix in
place I have finally real core files instead of 1KB fragments...
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
[ Cleaned it up a bit while here - use SEEK_CUR instead of hardcoding 1 ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (27 commits)
[CIFS] Missing flags2 for DFS
[CIFS] Workaround incomplete byte length returned by some
[CIFS] cifs Kconfig: don't select CONNECTOR
[CIFS] Level 1 QPathInfo needed for proper OS2 support
[CIFS] fix typo in previous patch
[CIFS] Fix old DOS time conversion to handle timezone
[CIFS] Do not need to adjust for Jan/Feb for leap day
[CIFS] Fix leaps year calculation for years after 2100
[CIFS] readdir (ffirst) enablement of accurate timestamps from legacy servers
[CIFS] Fix compiler warning with previous patch
[CIFS] Fix typo
[CIFS] Allow for 15 minute TZs (e.g. Nepal) and be more explicit about
[CIFS] Fix readdir of large directories for backlevel servers
[CIFS] Allow LANMAN21 support even in both POSIX non-POSIX path
[CIFS] Make use of newer QFSInfo dependent on capability bit instead of
[CIFS] Do not send newer QFSInfo to legacy servers which can not support it
[CIFS] Fix typo in name of new cifs_show_stats
[CIFS] Rename server time zone field
[CIFS] Handle legacy servers which return undefined time zone
[CIFS] CIFS support for /proc/<pid>/mountstats part 1
...
James Bottomley [Fri, 13 Oct 2006 03:21:16 +0000 (22:21 -0500)]
[VOYAGER] fix genirq mess
The implementation of genirq in x86 completely broke voyager (and
presumably visws). Since it's plugged into so much of the x86
infrastructure, you can't expect it to work unconverted.
This patch introduces a voyager IRQ handler type and switches voyager
to the genirq infrastructure.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
The plan is to have two trees. One for bug fixes to be sent on a
regular basis (-fixes) and another called -nmw which will contain items
queued for the next merge window (hence the name). The -nmw tree
will come & go according to need.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Adrian Bunk [Sun, 8 Oct 2006 02:30:48 +0000 (04:30 +0200)]
[DLM] Kconfig: don't show an empty DLM menu
Don't show an empty "Distributed Lock Manager" menu if IP_SCTP=n.
Reported by Dmytro Bagrii in kernel Bugzilla #7268.
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a bug where, in certain cases an uninitialised variable
could cause a dereference of a NULL pointer in gfs2_commit_write().
Also a typo in a comment is fixed at the same time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
projects / linux-2.6 / log