]> err.no Git - linux-2.6/log
linux-2.6
16 years agobcm43xx_debugfs sscanf fix
Andrew Morton [Thu, 13 Dec 2007 23:52:13 +0000 (15:52 -0800)]
bcm43xx_debugfs sscanf fix

ia64:

drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c: In function `tsf_write_file':
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3)
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3)

We do not know what type was used to implement u64 and we can never use u64 in
printk(), sscanf(), etc.

Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agolibertas: select WIRELESS_EXT
Dan Williams [Thu, 13 Dec 2007 23:52:12 +0000 (15:52 -0800)]
libertas: select WIRELESS_EXT

Ensure that libertas selects WIRELESS_EXT, since selecting other stuff that
should depend on WEXT, like IEEE80211, doesn't seem to drag that in for us.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoiwlwifi3945/4965: fix rate control algo reference leak
Cyrill Gorcunov [Thu, 13 Dec 2007 23:52:12 +0000 (15:52 -0800)]
iwlwifi3945/4965: fix rate control algo reference leak

Fix rate control algo reference leak in case if network device has been
failed to register.  In this case special flag priv->mac80211_registered is
not set and the rate algo reference is not freeing on module unload.  That
leads to OOPs in further ieee80211 rate register/unregister procedure (by
any callee).

It should fix the bug #9470

http://bugzilla.kernel.org/show_bug.cgi?id=9470

[akpm@linux-foundation.org: build fix]
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoieee80211_rate: missed unlock
Cyrill Gorcunov [Thu, 13 Dec 2007 23:52:11 +0000 (15:52 -0800)]
ieee80211_rate: missed unlock

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agowireless/ipw2200.c: add __dev{init,exit} annotations
Adrian Bunk [Tue, 11 Dec 2007 22:20:22 +0000 (23:20 +0100)]
wireless/ipw2200.c: add __dev{init,exit} annotations

This patch adds __dev{init,exit} annotations.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agozd1211rw: Fix alignment problems
Ulrich Kunitz [Sat, 1 Dec 2007 10:26:05 +0000 (11:26 +0100)]
zd1211rw: Fix alignment problems

Shaddy Baddah found an alignment problem with zd1211rw driver at
2007-11-19. This patch fixes it, it is based on the patch proposed by
Herbert Xu. The alignment 4 has been the agreed value on the
linux-wireless mailing list.

Notify that the problem does only affect the old zd1211rw softmac
driver and not the zd1211rw-mac80211 driver. Daniel Drake has
already provided a patch for the replacement of the softmac
driver, which this patch will break.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agolibertas: add Dan Williams as maintainer
Stefano Brivio [Mon, 19 Nov 2007 19:27:46 +0000 (20:27 +0100)]
libertas: add Dan Williams as maintainer

Add Dan Williams as maintainer for libertas driver.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoLinux 2.6.24-rc5 v2.6.24-rc5
Linus Torvalds [Tue, 11 Dec 2007 03:48:43 +0000 (19:48 -0800)]
Linux 2.6.24-rc5

16 years agoxen: relax signature check
Jeremy Fitzhardinge [Mon, 10 Dec 2007 21:00:41 +0000 (13:00 -0800)]
xen: relax signature check

Some versions of Xen 3.x set their magic number to "xen-3.[12]", so
relax the test to match them.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 11 Dec 2007 03:45:17 +0000 (19:45 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Malta: Enable tickless and highres timers.
  [MIPS] Bigsur: Enable tickless and and highres timers.
  qemu: do not enable IP7 blindly
  [MIPS] Alchemy: Fix Au1x SD controller IRQ
  [MIPS] Don't byteswap writes to display when running bigendian

16 years agoproc: remove/Fix proc generic d_revalidate
Eric W. Biederman [Mon, 10 Dec 2007 23:49:36 +0000 (15:49 -0800)]
proc: remove/Fix proc generic d_revalidate

Ultimately to implement /proc perfectly we need an implementation of
d_revalidate because files and directories can be removed behind the back
of the VFS, and d_revalidate is the only way we can let the VFS know that
this has happened.

Unfortunately the linux VFS can not cope with anything in the path to a
mount point going away.  So a proper d_revalidate method that calls d_drop
also needs to call have_submounts which is moderately expensive, so you
really don't want a d_revalidate method that unconditionally calls it, but
instead only calls it when the backing object has really gone away.

proc generic entries only disappear on module_unload (when not counting the
fledgling network namespace) so it is quite rare that we actually encounter
that case and has not actually caused us real world trouble yet.

So until we get a proper test for keeping dentries in the dcache fix the
current d_revalidate method by completely removing it.  This returns us to
the current status quo.

So with CONFIG_NETNS=n things should look as they have always looked.

For CONFIG_NETNS=y things work most of the time but there are a few rare
corner cases that don't behave properly.  As the network namespace is
barely present in 2.6.24 this should not be a problem.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "Denis V. Lunev" <den@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoatmel_spi: reload RCR before TCR
Rini van Zetten [Mon, 10 Dec 2007 23:49:34 +0000 (15:49 -0800)]
atmel_spi: reload RCR before TCR

We have a wifi module connected to the spi bus and got sometimes FIFO
overrun errors on the spi bus.

After some investigation i found that the driver loads the TCR (transmit
count) register before the RCR (receive count).  When the transfer list is
not empty the atmel_spi_next_message is called while tx and rx are enabled.
 As soon as the TCR is loaded, hardware starts transfer and causes a rx
fifo overrun because the RCR is not loaded yet.

Load the RCR before the TCR.  After this patch the fifo overrun disapears
at out setup.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Rini van Zetten <rini@arvoo.nl>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMAINTAINERS: update stale entries
Joe Perches [Mon, 10 Dec 2007 23:49:32 +0000 (15:49 -0800)]
MAINTAINERS: update stale entries

Some bad email addresses are removed:

        linux-tr@linuxtr.net
        ehaase@inf.fu-berlin.de

Some are updated:

        linux@maxim.org.za to andrew@sanpeople.com
        linux-kernel@linux-mips.org to linux-mips@linux-mips.org
        jdike@karaya.com to jdike@addtoit.com

The PCMCIA entry is corrected to a web address

The ZR36120 VIDEO FOR LINUX DRIVER entry is removed

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoesp_scsi: fix reset cleanup spinlock recursion
Maciej W. Rozycki [Mon, 10 Dec 2007 23:49:31 +0000 (15:49 -0800)]
esp_scsi: fix reset cleanup spinlock recursion

The esp_reset_cleanup() function is called with the host lock held and
invokes starget_for_each_device() which wants to take it too.  Here is a
fix along the lines of shost_for_each_device()/__shost_for_each_device()
adding a __starget_for_each_device() counterpart which assumes the lock
has already been taken.

Eventually, I think the driver should get modified so that more work is
done as a softirq rather than in the interrupt context, but for now it
fixes a bug that causes the spinlock debugger to fire.

While at it, it fixes a small number of cosmetic problems with
starget_for_each_device() too.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoFix NULL dereference in umem.c
Neil Brown [Mon, 10 Dec 2007 23:49:30 +0000 (15:49 -0800)]
Fix NULL dereference in umem.c

Fix NULL dereference in umem.c

Signed-off-by: Neil Brown <neilb@suse.de>
Tested-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/serial/uartlite.c: Add missing of_node_put
Julia Lawall [Mon, 10 Dec 2007 23:49:28 +0000 (15:49 -0800)]
drivers/serial/uartlite.c: Add missing of_node_put

There should be an of_node_put when breaking out of a loop that iterates
using for_each_compatible_node.

This was detected and fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
identifier d;
type T;
expression e;
iterator for_each_compatible_node;
@@

T *d;
...
for_each_compatible_node(d,...)
  {... when != of_node_put(d)
       when != e = d
(
   return d;
|
+  of_node_put(d);
?  return ...;
)
...}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agohugetlb: handle write-protection faults in follow_hugetlb_page
Adam Litke [Mon, 10 Dec 2007 23:49:28 +0000 (15:49 -0800)]
hugetlb: handle write-protection faults in follow_hugetlb_page

The follow_hugetlb_page() fix I posted (merged as git commit
5b23dbe8173c212d6a326e35347b038705603d39) missed one case.  If the pte is
present, but not writable and write access is requested by the caller to
get_user_pages(), the code will do the wrong thing.  Rather than calling
hugetlb_fault to make the pte writable, it notes the presence of the pte
and continues.

This simple one-liner makes sure we also fault on the pte for this case.
Please apply.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Dave Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agospi_imx: fix typo in description
Will Newton [Mon, 10 Dec 2007 23:49:27 +0000 (15:49 -0800)]
spi_imx: fix typo in description

Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agospi_bfin5xx: fix typo in description
Will Newton [Mon, 10 Dec 2007 23:49:26 +0000 (15:49 -0800)]
spi_bfin5xx: fix typo in description

Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopxa2xx_spi: fix typo in description
Will Newton [Mon, 10 Dec 2007 23:49:25 +0000 (15:49 -0800)]
pxa2xx_spi: fix typo in description

Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoasm-h8300: parentheses around definition CLOCK_TICK_RATE
Roel Kluin [Mon, 10 Dec 2007 23:49:24 +0000 (15:49 -0800)]
asm-h8300: parentheses around definition CLOCK_TICK_RATE

Some places where CLOCK_TICK_RATE may be used incorrectly:

arch/arm/mach-mx3/time.c:125:   __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR);
drivers/watchdog/davinci_wdt.c:103:     timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) & 0xffffffff);
drivers/watchdog/davinci_wdt.c:105:     timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) >> 32);
drivers/watchdog/ks8695_wdt.c:64:       unsigned long tval = wdt_time * CLOCK_TICK_RATE;

I'm not sure whether this definition is used there, but adding parentheses
should be good anyway.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopcmcia: fix kernel-doc comments
Randy Dunlap [Mon, 10 Dec 2007 23:49:22 +0000 (15:49 -0800)]
pcmcia: fix kernel-doc comments

Fix kernel-doc comments in drivers/pcmcia/:

- ti113x.h does not contain kernel-doc, so don't use /** to begin a doc
  comment
- yenta_socket.c: remove /** on non-kernel-doc comments;
  escape the ':' in an "http:" comment so that it won't be treated as a
  section heading;
- cs.c: remove /** on non-kernel-doc comments & add function parameter info
- ds.c: fix function parameter info

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agorevert "dpt_i2o: convert to SCSI hotplug model"
Andrew Morton [Mon, 10 Dec 2007 23:49:20 +0000 (15:49 -0800)]
revert "dpt_i2o: convert to SCSI hotplug model"

revert

    commit 55d9fcf57ba5ec427544fca7abc335cf3da78160
    Author: Matthew Wilcox <matthew@wil.cx>
    Date:   Mon Jul 30 15:19:18 2007 -0600

        [SCSI] dpt_i2o: convert to SCSI hotplug model

         - Delete refereces to HOSTS_C
         - Switch to module_init/module_exit instead of detect/release
         - Don't pass around the host template and rename it to adpt_template
         - Switch from scsi_register/scsi_unregister to scsi_host_alloc,
           scsi_add_host, scsi_scan_host and scsi_host_put.

Because it caused (for unknown reasons) Andres' all-data-reads-as-zeroes
problem, reported at
http://groups.google.com/group/fa.linux.kernel/msg/083a9acff0330234

Cc: Matthew Wilcox <matthew@wil.cx>
Cc: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Anders Henke <anders.henke@1und1.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoaoe: properly initialise the request_queue's backing_dev_info
Andrew Morton [Mon, 10 Dec 2007 23:49:13 +0000 (15:49 -0800)]
aoe: properly initialise the request_queue's backing_dev_info

AOE forgot to initialise its queue's backing_dev_info, so kernels crash.
(http://bugzilla.kernel.org/show_bug.cgi?id=9482)

Fix that and consoldate aoeblk_gdalloc()'s error handling.

Thanks be to Jon for reporting and testing.

Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: <stable@kernel.org>
Cc: "Jon Nelson" <jnelson@jamponi.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Mon, 10 Dec 2007 22:47:11 +0000 (14:47 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: OHCI 1.0 Isochronous Receive support

16 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Mon, 10 Dec 2007 22:40:46 +0000 (14:40 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix iosapic interrupt delivery mode for CPE
  [IA64] kprobe: make kreturn probe handler stack unwind correct
  [IA64] operator priority fix in acpi_map_lsapic()
  [IA64] Add missing "space" to concatenated strings
  [IA64] make full use of macro efi_md_size
  [IA64] rename _bss to __bss_start
  [IA64] SGI Altix : fix bug in sn_io_late_init()
  [IA64] iosapic cleanup
  [IA64] signal : fix missing error checkings
  [IA64] export copy_page() to modules
  [IA64] don't assume that unwcheck.py is executable
  [IA64] increase .data.patch offset

16 years agofirewire: OHCI 1.0 Isochronous Receive support
Jarod Wilson [Mon, 3 Dec 2007 18:43:12 +0000 (13:43 -0500)]
firewire: OHCI 1.0 Isochronous Receive support

Third rendition of FireWire OHCI 1.0 Isochronous Receive support, using a
zer-copy method similar to OHCI 1.1 which puts the IR data payload directly
into the userspace buffer. The zero-copy implementation eliminates the
video artifacts, audio popping, and buffer underrun problems seen with
version 1 of this patch, as well as fixing a regression in OHCI 1.1 support
introduced by version 2 of this patch.

Successfully tested in OHCI 1.1 mode on the following chipsets:

- NEC uPD72847 (rev 01), OHCI 1.1 (PCI)
- Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe)
- Ti TSB41AB2 (rev 01), OHCI 1.1 (PCI on SB Audigy)
- Apple UniNorth 2 (rev 81), OHCI 1.1 (PowerBook G4 onboard)

Successfully tested in OHCI 1.0 mode on the following chipsets:

- Agere FW323 (rev 06), OHCI 1.0 (Mac Mini onboard)
- Agere FW323 (rev 06), OHCI 1.0 (PCI)
- Via VT6306 (rev 46), OHCI 1.0 (PCI)
- NEC OrangeLink (rev 01), OHCI 1.0 (PCI)
- NEC uPD72847 (rev 01), OHCI 1.1 (PCI)
- Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe)

The bulk of testing was done in an x86_64 system, but was also successfully
sanity-tested on other systems, including a PPC(32) PowerBook G4 and an i686
EPIA M10k. Crude benchmarking (watching top during capture) puts the cpu
utilization during capture on the EPIA's 1GHz Via C3 processor around 13%,
which is down from 30% with the v1 code.

Some implementation details:

To maintain the same userspace API as dual-buffer mode, we set up two
descriptors for every incoming packet. The first is an INPUT_MORE descriptor,
pointing to a buffer large enough to hold just the packet's iso headers,
immediately followed by an INPUT_LAST descriptor, pointing to a chunk of the
userspace buffer big enough for the packet's data payload. With this setup,
each incoming packet fills in these two descriptors in a manner that very
closely emulates dual-buffer receive, to the point where the bulk of the
handle_ir_* code is now identical between the two (and probably primed for
some restructuring to share code between them).

The only caveat I have at the moment is that neither of my OHCI 1.0 Via
VT6307-based FireWire controllers work particularly well with this code
for reasons I have yet to figure out.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
16 years agoMerge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
Linus Torvalds [Mon, 10 Dec 2007 18:18:27 +0000 (10:18 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Fix xfs_ichgtime()s broken usage of I_SYNC
  [XFS] Make xfsbufd threads freezable
  [XFS] revert to double-buffering readdir
  [XFS] Fix broken inode cluster setup.
  [XFS] Clear XBF_READ_AHEAD flag on I/O completion.
  [XFS] Fixed a few bugs in xfs_buf_associate_memory()
  [XFS] 971064 Various fixups for xfs_bulkstat().
  [XFS] Fix dbflush panic in xfs_qm_sync.

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild
Linus Torvalds [Mon, 10 Dec 2007 18:17:07 +0000 (10:17 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild:
  kbuild: fix building with O=.. options
  kbuild: fix building with redirected output.

16 years agoRevert "PCI: fix IDE legacy mode resources"
Linus Torvalds [Mon, 10 Dec 2007 15:40:54 +0000 (07:40 -0800)]
Revert "PCI: fix IDE legacy mode resources"

This reverts commit fd6e732186ab522c812ab19c2c5e5befb8ec8115, which
helped up things on MIPS, but was wrong for everything else.  As Ralf
Baechle puts it:

  "It seems the whole MIPS resource managment is complicated enough (out
   of necessity) that only a few people actually grok it.  Ioports being
   actually memory mapped on MIPS only makes the confusion worse, sigh."

Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopowerpc: Fix IDE legacy vs. native fixups
Benjamin Herrenschmidt [Mon, 10 Dec 2007 04:29:22 +0000 (15:29 +1100)]
powerpc: Fix IDE legacy vs. native fixups

PowerMac and CHRP/BriQ platforms have quirks to switch some IDE
controllers from legacy mode to fully native mode. Those quirks
however will not work properly anymore due to a change to the
generic code to better handle legacy IDE resources.

This fixes it by moving those quirk to "early" quirks (so they
run before resources are probed for the devices) and clearing
all BARs after the conversion to force a reallocation of sane
values.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[XFS] Fix xfs_ichgtime()s broken usage of I_SYNC
David Chinner [Fri, 7 Dec 2007 03:09:11 +0000 (14:09 +1100)]
[XFS] Fix xfs_ichgtime()s broken usage of I_SYNC

The recent I_LOCK->I_SYNC changes mistakenly changed xfs_ichgtime to look
at I_SYNC instead of I_LOCK. This was incorrect and prevents newly created
inodes from moving to the dirty list. Change this to the correct check
which is for I_NEW, not I_LOCK or I_SYNC so that behaviour is correct.

SGI-PV: 974225
SGI-Modid: xfs-linux-melb:xfs-kern:30204a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
16 years ago[XFS] Make xfsbufd threads freezable
Rafael J. Wysocki [Fri, 7 Dec 2007 03:09:02 +0000 (14:09 +1100)]
[XFS] Make xfsbufd threads freezable

Fix breakage caused by commit 831441862956fffa17b9801db37e6ea1650b0f69
that did not introduce the necessary call to set_freezable() in
xfs/linux-2.6/xfs_buf.c .

SGI-PV: 974224
SGI-Modid: xfs-linux-melb:xfs-kern:30203a

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
16 years ago[XFS] revert to double-buffering readdir
Christoph Hellwig [Fri, 7 Dec 2007 03:07:53 +0000 (14:07 +1100)]
[XFS] revert to double-buffering readdir

The current readdir implementation deadlocks on a btree buffers locks
because nfsd calls back into ->lookup from the filldir callback. The only
short-term fix for this is to revert to the old inefficient
double-buffering scheme.

SGI-PV: 973377
SGI-Modid: xfs-linux-melb:xfs-kern:30201a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
16 years ago[XFS] Fix broken inode cluster setup.
David Chinner [Fri, 23 Nov 2007 05:30:23 +0000 (16:30 +1100)]
[XFS] Fix broken inode cluster setup.

The radix tree based inode caches did away with the inode cluster hashes,
replacing them with a bunch of masking and gang lookups on the radix tree.

This masking got broken when moving the code to per-ag radix trees and
indexing by agino # rather than straight inode number. The result is
clustered inode writeback does not cluster and things can go extremely
slowly when there are lots of inodes to write.

Fix it up by comparing the agino # of the inode we just looked up to the
index of the cluster we are looking for.

Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
SGI-PV: 972915
SGI-Modid: xfs-linux-melb:xfs-kern:30033a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
16 years ago[XFS] Clear XBF_READ_AHEAD flag on I/O completion.
Lachlan McIlroy [Fri, 23 Nov 2007 05:31:00 +0000 (16:31 +1100)]
[XFS] Clear XBF_READ_AHEAD flag on I/O completion.

SGI-PV: 972554
SGI-Modid: xfs-linux-melb:xfs-kern:30128a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
16 years ago[XFS] Fixed a few bugs in xfs_buf_associate_memory()
Lachlan McIlroy [Tue, 27 Nov 2007 06:01:24 +0000 (17:01 +1100)]
[XFS] Fixed a few bugs in xfs_buf_associate_memory()

- calculation of 'page_count' was incorrect as it did not
  consider the offset of 'mem' into the first page. The
  logic to bump 'page_count' didn't work if 'len' was <=
  PAGE_CACHE_SIZE (ie offset = 3k, len = 2k).
- setting b_buffer_length to 'len' is incorrect if 'offset'
  is > 0. Set it to the total length of the buffer.
- I suspect that passing a non-aligned address into
  mem_to_page() for the first page may have been causing
  issues - don't know but just tidy up that code anyway.

SGI-PV: 971596
SGI-Modid: xfs-linux-melb:xfs-kern:30143a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
16 years ago[XFS] 971064 Various fixups for xfs_bulkstat().
Lachlan McIlroy [Fri, 23 Nov 2007 05:30:32 +0000 (16:30 +1100)]
[XFS] 971064 Various fixups for xfs_bulkstat().

- sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]()
- remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This
  special case causes bulkstat to fail because the special case uses
  xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions
  have different semantics.  xfs_bulkstat() will return the next inode
  after the one supplied while skipping internal inodes (ie quota inodes).
  xfs_bulkstate_single() will only lookup the inode supplied and return
  an error if it is an internal inode.
- in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied
  so in cases were we return without examining any inodes the scan wont
  restart back at zero.
- sanity check for valid *ubcountp values. Cannot sanity check for valid
  ubuffer here because some users of xfs_bulkstat() don't supply a buffer.
- checks against 'ubleft' (the space left in the user's buffer) should be
  against 'statstruct_size' which is the supplied minimum object size.
  The mixture of checks against statstruct_size and 0 was one of the
  reasons we were skipping inodes.
- if the formatter function returns BULKSTAT_RV_NOTHING and an error and
  the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT
  is for inodes that are no longer valid and we just skip them. EINVAL is
  returned if we try to lookup an internal inode so we skip them too. For
  a DMF scan if the inode and DMF attribute cannot fit into the space left
  in the user's buffer it would return ERANGE. We didn't handle this error
  and skipped the inode. We would continue to skip inodes until one fitted
  into the user's buffer or we completed the scan.
- put back the recalculation of agino (that got removed with the last fix)
  at the end of the while loop. This is because the code at the start of
  the loop expects agino to be the last inode examined if it is non-zero.
- if we found some inodes but then encountered an error, return success
  this time and the error next time. If the formatter aborted with ENOMEM
  we will now return this error but only if we couldn't read any inodes.
  Previously if we encountered ENOMEM without reading any inodes we
  returned a zero count and no error which falsely indicated the scan was
  complete.

SGI-PV: 973431
SGI-Modid: xfs-linux-melb:xfs-kern:30089a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
16 years ago[XFS] Fix dbflush panic in xfs_qm_sync.
Donald Douwsma [Fri, 23 Nov 2007 05:27:42 +0000 (16:27 +1100)]
[XFS] Fix dbflush panic in xfs_qm_sync.

The recent behaviour layer removal dropped the check for quotas that have
been requested at mount time but have subsequently been turned off. This
results in a panic when accessing m_quotainfo which has been freed.

This patch adds the check originally made by xfs_qm_syncall() to
xfs_qm_sync().

SGI-PV: 969769
SGI-Modid: xfs-linux-melb:xfs-kern:29908a

Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
16 years agoAvoid double memclear() in SLOB/SLUB
Linus Torvalds [Sun, 9 Dec 2007 18:14:36 +0000 (10:14 -0800)]
Avoid double memclear() in SLOB/SLUB

Both slob and slub react to __GFP_ZERO by clearing the allocation, which
means that passing the GFP_ZERO bit down to the page allocator is just
wasteful and pointless.

Acked-by: Matt Mackall <mpm@selenic.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agokbuild: fix building with O=.. options
Sam Ravnborg [Sun, 9 Dec 2007 07:55:13 +0000 (08:55 +0100)]
kbuild: fix building with O=.. options

The check introduced in commit:
4f1127e204377cbd2a56d112d323466f668e8334 "kbuild: fix
infinite make recursion"

caused certain external modules not to build and
also caused 'make targz-pkg' to fail.
This is a minimal fix so we revert to previous
behaviour - but we do not overwrite the Makefile
in the top-level directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Jay Cliburn <jacliburn@bellsouth.net>
Cc: Jay Cliburn <jacliburn@bellsouth.net>
16 years agokbuild: fix building with redirected output.
Sam Ravnborg [Thu, 6 Dec 2007 21:20:11 +0000 (22:20 +0100)]
kbuild: fix building with redirected output.

Jan Altenberg <jan.altenberg@linutronix.de> reported that
building with redirected input like this failed:
make O=dir oldconfig bzImage < /dev/null

The problem were caused by a make silentoldconfig being
run before oldconfig and with a non-recent .config the build
failed because silentoldconfig requires non-redirected stdin.

Silentoldconfig was run as a side-effect of having the
top-level Makefile re-made by make.
Introducing an empty rule for the top-level Makefile
(and Kbuild.include) fixed the issue.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
16 years ago[MIPS] Malta: Enable tickless and highres timers.
Ralf Baechle [Fri, 16 Nov 2007 14:54:46 +0000 (14:54 +0000)]
[MIPS] Malta: Enable tickless and highres timers.

Most Malta use an FPGA CPU card which rarely is good for more than 40MHz.
So the performance penalta of the regular timer interrupt, especially
for the VSMP kernel model is significant, even at a mere 100Hz.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Bigsur: Enable tickless and and highres timers.
Ralf Baechle [Fri, 16 Nov 2007 23:15:51 +0000 (23:15 +0000)]
[MIPS] Bigsur: Enable tickless and and highres timers.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years agoqemu: do not enable IP7 blindly
Atsushi Nemoto [Thu, 22 Nov 2007 15:44:06 +0000 (00:44 +0900)]
qemu: do not enable IP7 blindly

IP7 will be enabled automatically in mips_clockevent_init(), if available.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Alchemy: Fix Au1x SD controller IRQ
Manuel Lauss [Thu, 6 Dec 2007 07:11:56 +0000 (08:11 +0100)]
[MIPS] Alchemy: Fix Au1x SD controller IRQ

With the introduction of MIPS_CPU_IRQ_BASE, the hardcoded IRQ number of
the au1100/au1200 SD controller(s) is no longer valid.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Don't byteswap writes to display when running bigendian
Chris Dearman [Thu, 6 Dec 2007 15:35:54 +0000 (15:35 +0000)]
[MIPS] Don't byteswap writes to display when running bigendian

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[IA64] Fix iosapic interrupt delivery mode for CPE
Kenji Kaneshige [Fri, 9 Nov 2007 01:51:01 +0000 (10:51 +0900)]
[IA64] Fix iosapic interrupt delivery mode for CPE

If "CPEI Processor Override" bit is not set in "Platform Interrupt
Source Flags" in "Platform Interrupt Sources Structure" in ACPI MADT,
the target processor of CPEI is restricted to a specific CPU. Because
of this, the delivery mode for CPEI should be IOSAPIC_FIXED.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] kprobe: make kreturn probe handler stack unwind correct
Shaohua Li [Tue, 13 Nov 2007 06:55:20 +0000 (14:55 +0800)]
[IA64] kprobe: make kreturn probe handler stack unwind correct

Restore regs->ccr_iip before kreturn probe handler runs. In this way, if
probe handler does unwind, unwind can correctly get the stack trace.

Fixes: http://sourceware.org/bugzilla/show_bug.cgi?id=5051
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] operator priority fix in acpi_map_lsapic()
Roel Kluin [Fri, 7 Dec 2007 22:59:30 +0000 (14:59 -0800)]
[IA64] operator priority fix in acpi_map_lsapic()

'!' has a higher priority than '&', so as was
this won't test the first bit, but rather evaluates to false for any non-zero
lsapic->lapic_flags.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] Add missing "space" to concatenated strings
Joe Perches [Tue, 20 Nov 2007 01:47:53 +0000 (17:47 -0800)]
[IA64] Add missing "space" to concatenated strings

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] make full use of macro efi_md_size
Li Zefan [Wed, 21 Nov 2007 22:58:26 +0000 (14:58 -0800)]
[IA64] make full use of macro efi_md_size

Macro efi_md_size is defined in efi.c, and here we apply it throughout
efi.c.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] rename _bss to __bss_start
Bernhard Walle [Wed, 21 Nov 2007 22:58:25 +0000 (14:58 -0800)]
[IA64] rename _bss to __bss_start

Rename _bss to __bss_start as on other architectures.  That makes it
possible to use the <linux/sections.h> instead of own declarations.  Also
add __bss_stop because that symbol exists on other architectures.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] SGI Altix : fix bug in sn_io_late_init()
Mike Habeck [Mon, 26 Nov 2007 17:19:57 +0000 (11:19 -0600)]
[IA64] SGI Altix : fix bug in sn_io_late_init()

When initializing pci_controller->node to point to the closest node we need
to take into consideration that a PIC PCI Bridge ASIC can be connected to a
headless/memless node just like the TIOCP and TIOCE Bridge ASICs

Signed-off-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] iosapic cleanup
Simon Horman [Fri, 7 Dec 2007 22:44:05 +0000 (14:44 -0800)]
[IA64] iosapic cleanup

Make some IOSAPIC functions static and remove one that is unused.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] signal : fix missing error checkings
Shi Weihua [Mon, 3 Dec 2007 04:57:50 +0000 (12:57 +0800)]
[IA64] signal : fix missing error checkings

Not all the return value of __copy_from_user and
__put_user is checked.This patch fixed it.

Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] export copy_page() to modules
Andrew Morton [Sat, 8 Dec 2007 00:10:19 +0000 (16:10 -0800)]
[IA64] export copy_page() to modules

With the unionfs patch applied I get

ERROR: "copy_page" [fs/unionfs/unionfs.ko] undefined!

the other architectures (some, at least) export copy_page() so I guess ia64
should also do so.

To do this we need to move the copy_page() functions out of lib.a and into
built-in.o and add the EXPORT_SYMBOL().

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] don't assume that unwcheck.py is executable
Andrew Morton [Fri, 7 Dec 2007 22:42:08 +0000 (14:42 -0800)]
[IA64] don't assume that unwcheck.py is executable

Don't assume that this file has execute permissions.  For example, patch(1)
loses that information.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] increase .data.patch offset
Andrew Morton [Wed, 5 Dec 2007 22:32:13 +0000 (14:32 -0800)]
[IA64] increase .data.patch offset

/opt/crosstool/gcc-3.4.5-glibc-2.3.6/ia64-unknown-linux-gnu/lib/gcc/ia64-unknown-linux-gnu/3.4.5/../../../../ia64-unknown-linux-gnu/bin/ld: section .data.patch [a000000000000500 -> a000000000000507] overlaps section .dynamic [a0000000000003c8 -> a000000000000507]

This only appears to be a problem with strangely configured
cross-compilation ... native compilers don't have this issue.
But in the interests of helping others at least compile for
ia64, this can go in. -Tony

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Fri, 7 Dec 2007 20:53:15 +0000 (12:53 -0800)]
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: kill spurious NCQ completion detection
  ahci: don't attach if ICH6 is in combined mode
  ata_piix: add Toshiba Tecra M4 to broken suspend list
  ahci: fix engine reset failed message

16 years agolibata: kill spurious NCQ completion detection
Tejun Heo [Fri, 7 Dec 2007 03:46:23 +0000 (12:46 +0900)]
libata: kill spurious NCQ completion detection

Spurious NCQ completion detection implemented in ahci was incorrect.
On AHCI receving and processing FISes and raising interrupts are not
interlocked and spurious interrupts are expected.

For example, if an interrupt occurs while interrupt handler is running
and the running interrupt handler handles the event the new IRQ
indicated, after IRQ handler finishes, it will be executed again
because IRQ pending bit is set by the new interrupt but there won't be
anything to process.

Please read the following message for more information.

  http://article.gmane.org/gmane.linux.ide/26012

This patch...

* Removes all spurious IRQ whining from ahci.  Spurious NCQ completion
  detection was completely wrong.  Spurious D2H Register FIS taught us
  that some early drives send spurious D2H Register FIS with I bit set
  while NCQ commands are in progress but none of recent drives does
  that and even the ones which show such behavior can do NCQ fine.

* Kills all NCQ blacklist entries which were added because of spurious
  NCQ completions.  I tracked down each commit and verified all
  removed ones are actually added because of spurious completions.

  WD740ADFD-00NLR1 wasn't deleted but moved upward because the drive
  not only had spurious NCQ completions but also is slow on sequential
  data transfers if NCQ is enabled.

  Maxtor 7V300F0 was added by 0e3dbc01d53940fe10e5a5cfec15ede3e929c918
  from Alan Cox.  I can only find evidences that the drive only had
  troubles with spuruious completions by searching the mailing list.
  This entry needs to be verified and removed if it doesn't have other
  NCQ related problems.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoahci: don't attach if ICH6 is in combined mode
Tejun Heo [Thu, 6 Dec 2007 06:09:43 +0000 (15:09 +0900)]
ahci: don't attach if ICH6 is in combined mode

ICH6 R/Ms share PCI ID between piix and ahci modes and we've been
allowing ahci to attach regardless of how BIOS configured it.
However, enabling AHCI mode when the controller is in combined mode
can result in unexpected behavior.  Don't attach if the controller is
in combined mode.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Bill Nottingham <notting@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoata_piix: add Toshiba Tecra M4 to broken suspend list
Peter Schwenke [Wed, 5 Dec 2007 01:39:49 +0000 (10:39 +0900)]
ata_piix: add Toshiba Tecra M4 to broken suspend list

Add Toshiba Tecra M4 to broken suspend list.  This is from OSDL
bugzilla bug 7780.

Signed-off-by: Peter Schwenke <peter@bluetoad.com.au>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoahci: fix engine reset failed message
Tejun Heo [Thu, 6 Dec 2007 06:02:48 +0000 (15:02 +0900)]
ahci: fix engine reset failed message

There isn't much point in reporting -EOPNOTSUPP as failure.  Also the
message was missing newline.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoS2io: Check for register initialization completion before accesing device registers
Sreenivasa Honnur [Thu, 6 Dec 2007 04:59:28 +0000 (23:59 -0500)]
S2io: Check for register initialization completion before accesing device registers

- Making sure register initialisation is complete before proceeding further.
  The driver must wait until initialization is complete before attempting to
  access any other device registers.

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Update file headers copyright notices
Benjamin Herrenschmidt [Wed, 5 Dec 2007 00:14:33 +0000 (11:14 +1100)]
ibm_newemac: Update file headers copyright notices

This updates the copyright notices of the new EMAC driver to
avoid confusion as who is to be blamed for new bugs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Call dev_set_drvdata() before tah_reset()
Valentine Barshak [Wed, 5 Dec 2007 00:14:32 +0000 (11:14 +1100)]
ibm_newemac: Call dev_set_drvdata() before tah_reset()

The patch moves dev_set_drvdata(&ofdev->dev, dev) up before tah_reset(ofdev)
is called to avoid a NULL pointer dereference, since tah_reset uses drvdata.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Fix typo reading TAH channel info
Valentine Barshak [Wed, 5 Dec 2007 00:14:31 +0000 (11:14 +1100)]
ibm_newemac: Fix typo reading TAH channel info

This patch fixes a typo in ibm_newemac/core.c
(tah_port should be used instead of tah_ph)

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Correct opb_bus_freq value
Valentine Barshak [Wed, 5 Dec 2007 00:14:31 +0000 (11:14 +1100)]
ibm_newemac: Correct opb_bus_freq value

The EMAC4_MR1_OBCI(freq) macro expects freg in MHz,
while opb_bus_freq is kept in Hz. Correct this.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Skip EMACs that are marked unused by the firmware
Hugh Blemings [Wed, 5 Dec 2007 00:14:30 +0000 (11:14 +1100)]
ibm_newemac: Skip EMACs that are marked unused by the firmware

Depending on how the 44x processors are wired, some EMAC cells
might not be useable (and not connected to a PHY). However, some
device-trees may choose to still expose them (since their registers
are present in the MMIO space) but with an "unused" property in them.

Signed-off-by: Hugh Blemings <hugh@blemings.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Cleanup/fix support for STACR register variants
Benjamin Herrenschmidt [Wed, 5 Dec 2007 00:14:29 +0000 (11:14 +1100)]
ibm_newemac: Cleanup/fix support for STACR register variants

There are a few variants of the STACR register that affect more than
just the "AXON" version of EMAC. Replace the current test of various
chip models with tests for generic properties in the device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Cleanup/Fix RGMII MDIO support detection
Benjamin Herrenschmidt [Wed, 5 Dec 2007 00:14:28 +0000 (11:14 +1100)]
ibm_newemac: Cleanup/Fix RGMII MDIO support detection

More than just "AXON" version of EMAC RGMII supports MDIO, so replace
the current test with a generic property in the device-tree that
indicates such support.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Workaround reset timeout when no link
Benjamin Herrenschmidt [Wed, 5 Dec 2007 00:14:27 +0000 (11:14 +1100)]
ibm_newemac: Workaround reset timeout when no link

With some PHYs, when the link goes away, the EMAC reset fails due
to the loss of the RX clock I believe.

The old EMAC driver worked around that using some internal chip-specific
clock force bits that are different on various 44x implementations.

This is an attempt at doing it differently, by avoiding the reset when
there is no link, but forcing loopback mode instead. It seems to work
on my Taishan 440GX based board so far.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Fix ZMII refcounting bug
Benjamin Herrenschmidt [Wed, 5 Dec 2007 00:14:27 +0000 (11:14 +1100)]
ibm_newemac: Fix ZMII refcounting bug

When using ZMII for MDIO only (such as 440GX with RGMII for data and ZMII for
MDIO), the ZMII code would fail to properly refcount, thus triggering a
BUG_ON().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Add ET1011c PHY support
Stefan Roese [Wed, 5 Dec 2007 00:14:26 +0000 (11:14 +1100)]
ibm_newemac: Add ET1011c PHY support

This adds support for the Agere ET1011c PHY as found on the AMCC Taishan
board.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support
Stefan Roese [Wed, 5 Dec 2007 00:14:25 +0000 (11:14 +1100)]
ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support

This patch adds BCM5248 and Marvell 88E1111 PHY support to NEW EMAC driver.
These PHY chips are used on PowerPC 440EPx boards.
The PHY code is based on the previous work by Stefan Roese <sr@denx.de>

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoe100: cleanup unneeded math
Auke Kok [Wed, 5 Dec 2007 19:57:37 +0000 (11:57 -0800)]
e100: cleanup unneeded math

No need to convert to bytes and back - cleanup unneeded code.

Adapted from fix from 'Roel Kluin <12o3l@tiscali.nl>'

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoe1000: fix memcpy in e1000_get_strings
Roel Kluin [Wed, 5 Dec 2007 19:57:30 +0000 (11:57 -0800)]
e1000: fix memcpy in e1000_get_strings

drivers/net/e1000/e1000_ethtool.c:113:
#define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN

drivers/net/e1000e/ethtool.c:106:
#define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN

E1000_TEST_LEN*ETH_GSTRING_LEN will expand to
sizeof(e1000_gstrings_test) / (ETH_GSTRING_LEN * ETH_GSTRING_LEN)

A lack of parentheses around defines causes unexpected results due to
operator precedences.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agomake bnx2x select ZLIB_INFLATE
Eliezer Tamir [Wed, 5 Dec 2007 14:12:39 +0000 (16:12 +0200)]
make bnx2x select ZLIB_INFLATE

The bnx2x module depends on the zlib_inflate functions.  The
build will fail if ZLIB_INFLATE has not been selected manually
or by building another module that automatically selects it.

Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2
and others.  This seems to fix it.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agocxgb3 - T3C support update
Divy Le Ray [Wed, 5 Dec 2007 18:15:01 +0000 (10:15 -0800)]
cxgb3 - T3C support update

Update GPIO mapping for T3C.
Update xgmac for T3C support.
Fix typo in mtu table.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Fix race at module unload
Jay Vosburgh [Fri, 7 Dec 2007 07:40:35 +0000 (23:40 -0800)]
bonding: Fix race at module unload

Fixes a race condition in module unload.  Without this change,
workqueue events may fire while bonding data structures are partially
freed but before bond_close() is invoked by unregister_netdevice().

Update version to 3.2.3.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Add new layer2+3 hash for xor/802.3ad modes
Jay Vosburgh [Fri, 7 Dec 2007 07:40:34 +0000 (23:40 -0800)]
bonding: Add new layer2+3 hash for xor/802.3ad modes

  Add new hash for balance-xor and 802.3ad modes.  Originally
 submitted by "Glenn Griffin" <ggriffin.kernel@gmail.com>; modified by
 Jay Vosburgh to move setting of hash policy out of line, tweak the
 documentation update and add version update to 3.2.2.

Glenn's original comment follows:

Included is a patch for a new xmit_hash_policy for the bonding driver
that selects slaves based on MAC and IP information.  This is a middle
ground between what currently exists in the layer2 only policy and the
layer3+4 policy.  This policy strives to be fully 802.3ad compliant by
transmitting every packet of any particular flow over the same link.
As documented the layer3+4 policy is not fully compliant for extreme
cases such as ip fragmentation, so this policy is a nice compromise
for environments that require full compliance but desire more than the
layer2 only policy.

Signed-off-by: "Glenn Griffin" <ggriffin.kernel@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Fix time comparison
David Sterba [Fri, 7 Dec 2007 07:40:33 +0000 (23:40 -0800)]
bonding: Fix time comparison

From: David Sterba <dsterba@suse.cz>

Use macros for comparing jiffies. Jiffies' wrap caused missed events and hangs.
Module reinsert was needed to make bonding work again.

Signed-off-by: David Sterba <dsterba@suse.cz>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Allow setting and querying xmit policy regardless of mode
Wagner Ferenc [Fri, 7 Dec 2007 07:40:32 +0000 (23:40 -0800)]
bonding: Allow setting and querying xmit policy regardless of mode

From: Wagner Ferenc <wferi@niif.hu>

For consistency with the behaviour of the arp_ip_target option,
let /sys/class/net/bond0/bonding/xmit_hash_policy accept and report
current policy even if the bonding mode in effect does not use it.

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Coding style: break line after the if condition
Wagner Ferenc [Fri, 7 Dec 2007 07:40:31 +0000 (23:40 -0800)]
bonding: Coding style: break line after the if condition

From: Wagner Ferenc <wferi@niif.hu>

Adhere to coding style: break line after the if condition

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Purely cosmetic: rename a local variable
Wagner Ferenc [Fri, 7 Dec 2007 07:40:30 +0000 (23:40 -0800)]
bonding: Purely cosmetic: rename a local variable

From: Wagner Ferenc <wferi@niif.hu>

Code for rendering multivalue sysfs files occurs three times
in this module.  Rename 'buffer' to 'buf' in the first, for
the sake of consistency.

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Return nothing for not applicable values
Wagner Ferenc [Fri, 7 Dec 2007 07:40:29 +0000 (23:40 -0800)]
bonding: Return nothing for not applicable values

From: Wagner Ferenc <wferi@niif.hu>

The previous code returned '\n' (that is, a single empty line)
from most files, with one exception (xmit_hash_policy), where
it returned 'NA\n'.  This patch consolidates each file to return
nothing at all if not applicable, not even a '\n'.

I find this behaviour more usual, more useful, more efficient
and shorter to code from both sides.

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agobonding: Remove trailing NULs from sysfs interface.
Wagner Ferenc [Fri, 7 Dec 2007 07:40:28 +0000 (23:40 -0800)]
bonding: Remove trailing NULs from sysfs interface.

From: Wagner Ferenc <wferi@niif.hu>

Also remove trailing spaces from multivalued files.

This fixes output like for example:

$ od -c /sys/class/net/bond0/bonding/slaves
0000000   e   t   h   -   l   e   f   t       e   t   h   -   r   i   g
0000020   h   t      \n  \0
0000025

It mostly entails deleting '+1'-s after sprintf() calls: the return value
of sprintf is the number of characters printed, without the closing NUL,
ie. exactly what the sysfs interface requires.  The three multivalue
cases are different, because they also have to swallow back a trailing
space.

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
Linus Torvalds [Fri, 7 Dec 2007 19:01:26 +0000 (11:01 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  ACPI: move timer broadcast before busmaster disable
  clockevents: warn once when program_event() is called with negative expiry
  hrtimers: avoid overflow for large relative timeouts

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Fri, 7 Dec 2007 19:00:46 +0000 (11:00 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: enable early use of sched_clock()
  lockdep: make cli/sti annotation warnings clearer

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen...
Linus Torvalds [Fri, 7 Dec 2007 19:00:31 +0000 (11:00 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] Fix wrong pt_regs in critical exception handler
  [AVR32] Fix copy_to_user_page() breakage
  [AVR32] Follow the rules when dealing with the OCD system
  [AVR32] Clean up OCD register usage
  [AVR32] Implement irqflags trace and lockdep support
  [AVR32] Implement stacktrace support
  [AVR32] Kconfig: Use def_bool instead of bool + default
  [AVR32] Fix invalid status register bit definitions in asm/ptrace.h
  [AVR32] Add TIF_RESTORE_SIGMASK to the work masks

16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 7 Dec 2007 18:59:48 +0000 (10:59 -0800)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [AF_RXRPC]: Add a missing goto
  [VLAN]: Lost rtnl_unlock() in vlan_ioctl()
  [SCTP]: Fix the bind_addr info during migration.
  [SCTP]: Add bind hash locking to the migrate code
  [IPV4]: Remove prototype of ip_rt_advice
  [IPv4]: Reply net unreachable ICMP message
  [IPv6] SNMP: Increment OutNoRoutes when connecting to unreachable network
  [BRIDGE]: Section fix.
  [NIU]: Fix link LED handling.

16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 7 Dec 2007 18:59:33 +0000 (10:59 -0800)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix memory controller register access when non-SMP.

16 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
Linus Torvalds [Fri, 7 Dec 2007 18:58:19 +0000 (10:58 -0800)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Fix led trigger locking bugs

16 years agoACPI: move timer broadcast before busmaster disable
Thomas Gleixner [Fri, 7 Dec 2007 18:16:17 +0000 (19:16 +0100)]
ACPI: move timer broadcast before busmaster disable

The timer broadcast code might access HPET, which should not be
accessed after the busmaster disable.

In acpi_idle_enter_simple() this change also prevents, that we modify
the busmaster state without going actually idle. This might leave the
ACPI bm state in a stale state, when we leave the function early in
the need_resched() check.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
16 years agoclockevents: warn once when program_event() is called with negative expiry
Thomas Gleixner [Fri, 7 Dec 2007 18:16:17 +0000 (19:16 +0100)]
clockevents: warn once when program_event() is called with negative expiry

The hrtimer problem with large relative timeouts resulting in a
negative expiry time went unnoticed as there is no check in the
clockevents_program_event() code. Put a check there with a WARN_ONCE
to avoid such problems in the future.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agohrtimers: avoid overflow for large relative timeouts
Thomas Gleixner [Fri, 7 Dec 2007 18:16:17 +0000 (19:16 +0100)]
hrtimers: avoid overflow for large relative timeouts

Relative hrtimers with a large timeout value might end up as negative
timer values, when the current time is added in hrtimer_start().

This in turn is causing the clockevents_set_next() function to set an
huge timeout and sleep for quite a long time when we have a clock
source which is capable of long sleeps like HPET. With PIT this almost
goes unnoticed as the maximum delta is ~27ms. The non-hrt/nohz code
sorts this out in the next timer interrupt, so we never noticed that
problem which has been there since the first day of hrtimers.

This bug became more apparent in 2.6.24 which activates HPET on more
hardware.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: enable early use of sched_clock()
Ingo Molnar [Fri, 7 Dec 2007 18:02:47 +0000 (19:02 +0100)]
sched: enable early use of sched_clock()

some platforms have sched_clock() implementations that cannot be called
very early during wakeup. If it's called it might hang or crash in hard
to debug ways. So only call update_rq_clock() [which calls sched_clock()]
if sched_init() has already been called. (rq->idle is NULL before the
scheduler is initialized.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agolockdep: make cli/sti annotation warnings clearer
Ingo Molnar [Fri, 7 Dec 2007 18:02:47 +0000 (19:02 +0100)]
lockdep: make cli/sti annotation warnings clearer

make cli/sti annotation warnings easier to interpret.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
16 years ago[AVR32] Fix wrong pt_regs in critical exception handler
Haavard Skinnemoen [Mon, 3 Dec 2007 17:30:15 +0000 (18:30 +0100)]
[AVR32] Fix wrong pt_regs in critical exception handler

It's not like it really matters at this point since the system is
dying anyway, but handle_critical pushes too few registers on the
stack so the register dump, which makes the register dump look a bit
strange. This patch fixes it.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>