powerpc: Add helper functions for synthesising instructions at runtime
There's a few places already, and soon will be more, where we synthesise
branch instructions at runtime. Rather than doing it by hand in each case,
it would make sense to have one implementation.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
powerpc: Set entry point and text address in linker script
Currently we set the kernel entry point and the address of the text
section in the Makefile, using CONFIG_KERNEL_START.
But we've already got <asm/page.h> in the linker script, so we can just
use KERNELBASE directly. That means if we ever change KERNELBASE there's
one less place to change it.
And we can set the entry point with ENTRY().
There are zero differences from "readelf -a vmlinux" with or without this
patch.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h
Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h.
The only thing that's really changed is that we now allocate crash_notes
properly on PPC32. It's address is exported via sysfs, so it's not correct
for it to be a pointer.
I've also removed some of the "we don't use this" comments, because they're
wrong (or perhaps were referring only to arch code).
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
David Gibson [Tue, 1 Nov 2005 04:30:26 +0000 (15:30 +1100)]
[PATCH] powerpc: Move naca.h to platforms/iseries
These days, the NACA only exists on iSeries. Therefore, this patch
moves naca.h from include/asm-ppc64 to arch/powerpc/platforms/iseries.
There was one file including naca.h outside of platforms/iseries -
arch/ppc64/kernel/udbg_scc.c. However, that's obviously a hangover
from older days. The include is not necessary, so this patch simply
removes it.
Built and booted on iSeries, built for G5 (which uses udbg_scc.o).
Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
David Gibson [Wed, 2 Nov 2005 04:13:20 +0000 (15:13 +1100)]
[PATCH] powerpc: Move dart.h
asm-ppc64/dart.h is included in exactly one place -
arch/powerpc/sysdev/u3_iommu.c. This patch, therefore, moves it into
arch/powerpc/sysdev. While we're at it, update the #ifndef/#define
protecting the include, and the filename in the comments of
u3_iommu.c.
Built and booted on pSeries and G5, built for ppc32 powermac.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
David Gibson [Wed, 2 Nov 2005 03:48:36 +0000 (14:48 +1100)]
[PATCH] powerpc: Merge (move) numnodes.h and sparsemem.h
The ppc64 versions of numnodes.h and sparsemem.h can be safely moved
to asm-powerpc with no changes apart from changing the #define to the
standard _ASM_POWERPC_ form. There are no ppc32 versions of these
files, because they only have any effect if CONFIG_SPARSEMEM is
enabled, which it never can be on ppc32.
Built and booted on pSeries (POWER5), built for 32-bit powermac.
Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Wed, 2 Nov 2005 04:19:47 +0000 (15:19 +1100)]
powerpc: clean up bug.h further
This simplifies the macros which are different between 32-bit and
64-bit. It also fixes a couple of printks on the bug->line element,
which is now a long.
Paul Mackerras [Wed, 2 Nov 2005 04:08:17 +0000 (15:08 +1100)]
powerpc: exclude powerbook sleep code with CONFIG_PPC64 and CONFIG_PM
We were getting powerbook sleep code included, and giving compile
errors, with CONFIG_PM=y on a 64-bit build. This excludes that code
so the kernel will compile. One day BenH will implement on sleep on
the G5...
Paul Mackerras [Wed, 2 Nov 2005 04:04:26 +0000 (15:04 +1100)]
powerpc: Use rtas_call not call_rtas in CHRP code
The nvram driver imported from the ppc code uses call_rtas, but
rtas_call is the name we are using in merged code (since ppc64 used
that name, and it uses far more RTAS calls than ppc32).
David Gibson [Wed, 2 Nov 2005 02:58:22 +0000 (13:58 +1100)]
[PATCH] powerpc: Merge futex.h
This patch merges the ppc32 and ppc64 versions of futex.h, essentially
by taking the ppc64 version as the powerpc version. The old ppc32
version did not implement the futex_atomic_op_inuser() callback (it
always returned -ENOSYS), so FUTEX_WAKE_OP would not work on ppc32.
In fact the ppc64 version of this function is almost suitable for
ppc32 as well - the only change needed is to extend ppc_asm.h with a
macro expanding to to the right pseudo-op to store a pointer (either
".long" or ".llong").
Built and booted on pSeries. Built for 32-bit powermac.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
David Gibson [Wed, 2 Nov 2005 00:44:26 +0000 (11:44 +1100)]
[PATCH] powerpc: Fix merged ipcbuf.h
Oops, when merging ipcbuf.h, I forgot that 'u64' can't be used in
user-visible headers. This patch corrects the problem, replacing the
unused fields with an array of four __u32s.
Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Tue, 1 Nov 2005 11:37:47 +0000 (22:37 +1100)]
powerpc: Fix pseries (64-bit) build
A recent commit that removed rtas-fw.h and moved its contents to
include/asm-powerpc/rtas.h forgot to also remove the inclusion of
it in arch/powerpc/platforms/pseries/setup.c.
Paul Mackerras [Tue, 1 Nov 2005 10:54:38 +0000 (21:54 +1100)]
powerpc: Fix BUG/WARN macros for 64-bit
The bug_entry struct had an int in the middle of pointers and unsigned
longs, and the inline asm that generated the bug table entries didn't
insert the necessary padding, so the fields following it didn't get
initialized properly and an oops resulted. This changes the int field
(the line number) to a long so that all the fields are the same size
and no padding is required.
David Gibson [Tue, 1 Nov 2005 06:28:10 +0000 (17:28 +1100)]
[PATCH] powerpc: Merge bitops.h
Here's a revised version. This re-introduces the set_bits() function
from ppc64, which I removed because I thought it was unused (it exists
on no other arch). In fact it is used in the powermac interrupt code
(but not on pSeries).
- We use LARXL/STCXL macros to generate the right (32 or 64 bit)
instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S
- ppc32 previously used a full "sync" barrier at the end of
test_and_*_bit(), whereas ppc64 used an "isync". The merged version
uses "isync", since I believe that's sufficient.
- The ppc64 versions of then minix_*() bitmap functions have changed
semantics. Previously on ppc64, these functions were big-endian
(that is bit 0 was the LSB in the first 64-bit, big-endian word).
On ppc32 (and x86, for that matter, they were little-endian. As far
as I can tell, the big-endian usage was simply wrong - I guess
no-one ever tried to use minixfs on ppc64.
- On ppc32 find_next_bit() and find_next_zero_bit() are no longer
inline (they were already out-of-line on ppc64).
- For ppc64, sched_find_first_bit() has moved from mmu_context.h to
the merged bitops. What it was doing in mmu_context.h in the first
place, I have no idea.
- The fls() function is now implemented using the cntlzw instruction
on ppc64, instead of generic_fls(), as it already was on ppc32.
- For ARCH=ppc, this patch requires adding arch/powerpc/lib to the
arch/ppc/Makefile. This in turn requires some changes to
arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc.
Built and running on G5.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
David Gibson [Tue, 1 Nov 2005 05:53:24 +0000 (16:53 +1100)]
[PATCH] powerpc: Merge ipcbuf.h
This patch merges ppc32 and ppc64 versions of ipcbuf.h. The merge is
essentially trivial, since the structure defined in each version was
already identical. Only wrinkle is that the merged version now
includes linux/types.h in order to get the fixed width integer types.
In fact, the old versions probably should have been including that
anyway, since the file uses various __kernel_*_t types.
Built and booted on G5, built for 32-bit pmac, but not booted, since
the merge tree currently doesn't boot there.
Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Arnd Bergmann [Tue, 1 Nov 2005 01:08:37 +0000 (20:08 -0500)]
[PATCH] powerpc: Rename BPA to Cell
The official name for BPA is now CBEA (Cell Broadband
Engine Architecture). This patch renames all occurences
of the term BPA to 'Cell' for easier recognition.
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Linus Torvalds [Tue, 1 Nov 2005 05:12:40 +0000 (21:12 -0800)]
Don't touch USB controller IO registers when they are disabled
The USB "handoff" code is an early PCI quirk to make sure we own the USB
controller (as opposed to the BIOS/SMM). But if the controller isn't
even enabled yet, don't try to access it.
Acked-by: Paul Mackerras <paulus@samba.org> (who had an alternate patch) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Tue, 1 Nov 2005 03:16:17 +0000 (19:16 -0800)]
Revert "i386: move apic init in init_IRQs"
Commit f2b36db692b7ff6972320ad9839ae656a3b0ee3e causes a bootup hang on
at least one machine. Revert for now until we understand why. The old
code may be ugly, but it works.
This adds the magic IO wakeup code for the CardBus version of the
Creative Labs Audigy 2 to the snd-emu10k1 driver.
Without the magic IO enable sequence, reading from the IO region of the
card will fail spectacularly, and the machine will hang.
My next task will be getting the driver to actually play sound without
distortion.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
[ This is a work-in-progress, but since it avoids a total lockup
if the emu10k module is loaded on a machine with the cardbus
card inserted, we're better off with it than without it, even
if sound quality is bad right now ]
Andrea Arcangeli [Mon, 31 Oct 2005 22:08:54 +0000 (14:08 -0800)]
[PATCH] fix __writeback_single_inode WARN_ON
When the inode count is zero in inode writeback, the
WARN_ON(!(inode->i_state & I_WILL_FREE));
is broken, and needs to test for either I_WILL_FREE|I_FREEING.
When the inode is in I_FREEING state, it's already out of the visibility
of the vm so it can't be freed so it doesn't require the __iget and the
generic_delete_inode path can call the sync internally to the lowlevel
fs callback during the last iput. So the inode being in I_FREEING is
also a valid condition for calling the sync with i_count == 0.
Arthur Othieno [Mon, 31 Oct 2005 04:04:05 +0000 (23:04 -0500)]
[PATCH] i386: CONFIG_PC removal
CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with
the subarch split. Remove it, and fixup the remaining users to depend on
CONFIG_X86_PC instead.
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
"I'm currently debugging this. The problem is that we are using the
generic dispatch queue directly in the noop sched and merging is NOT
allowed on dispatch queues but generic handling of last_merge tries
to merge requests. I'm still trying to verify this, so I'll be back
with results soon."
In the meantime, disable merging for noop by setting REQ_NOMERGE in
elevator_noop_add_request().
Eventually, we should add a noop_list and do the dispatching like in the
other io schedulers. Merging is still beneficial for noop (and it has
always done it).
Jeff Garzik [Mon, 31 Oct 2005 04:31:48 +0000 (23:31 -0500)]
[libata] locking rewrite (== fix)
A lot of power packed into a little patch.
This change eliminates the sharing between our controller-wide spinlock
and the SCSI core's Scsi_Host lock. As the locking in libata was
already highly compartmentalized, always referencing our own lock, and
never scsi_host::host_lock.
As a side effect, this change eliminates a deadlock from calling
scsi_finish_command() while inside our spinlock.
Paul Mackerras [Mon, 31 Oct 2005 02:07:02 +0000 (13:07 +1100)]
powerpc: Fix bug arising from having multiple memory_limit variables
We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line. This puts the declaration
in system.h and the definition in mem.c. This also moves the
definition of tce_alloc_start/end out of setup_64.c.
This patch removes duplicate directory scanning code from fs/fat/dir.c. The
two functions that share identical code are fat_readdirx() and
fat_search_long(). This patch also renames fat_readdirx to __fat_readdir().
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tim Schmielau [Sun, 30 Oct 2005 23:03:48 +0000 (15:03 -0800)]
[PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.
In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch. This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other. So if any
hunk rejects or gets in the way of other patches, just drop it. My scripts
will pick it up again in the next round.
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:44 +0000 (15:03 -0800)]
[PATCH] hpet: hpet driver cleanups
- Use kzalloc() instead of kmalloc + memset.
- Clean/fix some printk's.
- Use NULL for pointers instead of 0.
- Combine hpet busy searching locations into a function call.
Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:43 +0000 (15:03 -0800)]
[PATCH] hpet: use HPET physical addresses for dup. detection
- Use HPET physical address to detect duplicates, not logical addresses.
Using logical (mapped) addresses fails to detect duplicates
because ioremap() returns a new mapped address each time.
- iounmap() regions when duplicate/busy areas are found.
Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:42 +0000 (15:03 -0800)]
[PATCH] hpet: allow HPET FIXED_MEM32 resource type
Allow the ACPI HPET description table to use a resource type of FIXED_MEM32
for the HPET reource. Use the fixed resoure size of 1 KB for the HPET
resource as per the HPET spec.
Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:41 +0000 (15:03 -0800)]
[PATCH] hpet: simplify initialization message
When booting, display the timer frequency in Hertz instead of as tick length
in nanoseconds. Apart from saving a local variable, this makes the message
more easily comprehensible.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6 / log