Michael Chan [Thu, 16 Nov 2006 05:14:42 +0000 (21:14 -0800)]
[TG3]: Disable TSO on 5906 if CLKREQ is enabled.
Due to hardware errata, TSO must be disabled if the PCI Express clock
request is enabled on 5906. The chip may hang when transmitting TSO
frames if CLKREQ is enabled.
Update version to 3.69.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yasuyuki Kozakai [Wed, 15 Nov 2006 03:48:48 +0000 (19:48 -0800)]
[NETFILTER]: ip6_tables: fixed conflicted optname for getsockopt
66 and 67 for getsockopt on IPv6 socket is doubly used for IPv6 Advanced
API and ip6tables. This moves numbers for ip6tables to 68 and 69.
This also kills XT_SO_* because {ip,ip6,arp}_tables doesn't have so much
common numbers now.
The old userland tools keep to behave as ever, because old kernel always
calls functions of IPv6 Advanced API for their numbers.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Wed, 15 Nov 2006 03:48:09 +0000 (19:48 -0800)]
[NETFILTER]: Use pskb_trim in {ip,ip6,nfnetlink}_queue
Based on patch by James D. Nurmi:
I've got some code very dependant on nfnetlink_queue, and turned up a
large number of warns coming from skb_trim. While it's quite possibly
my code, having not seen it on older kernels made me a bit suspect.
Anyhow, based on some googling I turned up this thread:
http://lkml.org/lkml/2006/8/13/56
And believe the issue to be related, so attached is a small patch to
the kernel -- not sure if this is completely correct, but for anyone
else hitting the WARN_ON(1) in skbuff.h, it might be helpful..
Signed-off-by: James D. Nurmi <jdnurmi@gmail.com>
Ported to ip6_queue and nfnetlink_queue and added return value
checks.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Gary Zambrano [Wed, 15 Nov 2006 00:34:00 +0000 (16:34 -0800)]
[TG3]: Increase 5906 firmware poll time.
Newer 5906 bootcode needs about 7ms to finish resetting so the poll
firmware loop was changed to maximum 20ms.
Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[PATCH] powerpc: windfarm shall request it's sub modules
The windfarm code, in it's current incarnation, uses request_module() to
load the various submodules it needs for a given platform so that only
the main platform control module needs to be modprobed. However, it was
missing various bits. This fixes it. In the future, we'll use some
hotplug mecanisms to try to get all of this auto-loaded on the platforms
where it matters but that isn't ready yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
"Now, edge-triggered interrupts are a _lot_ harder to mask, because the
Intel APIC is an unbelievable piece of sh*t, and has the edge-detect logic
_before_ the mask logic, so if a edge happens _while_ the device is
masked, you'll never ever see the edge ever again (unmasking will not
cause a new edge, so you simply lost the interrupt).
So when you "mask" an edge-triggered IRQ, you can't really mask it at all,
because if you did that, you'd lose it forever if the IRQ comes in while
you masked it. Instead, we're supposed to leave it active, and set a flag,
and IF the IRQ comes in, we just remember it, and mask it at that point
instead, and then on unmasking, we have to replay it by sending a
self-IPI."
This trivial patch solves the problem.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Tue, 14 Nov 2006 23:23:17 +0000 (15:23 -0800)]
Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
[PATCH] x86-64: Fix race in exit_idle
[PATCH] x86-64: Fix vgetcpu when CONFIG_HOTPLUG_CPU is disabled
[PATCH] x86: Add acpi_user_timer_override option for Asus boards
[PATCH] x86-64: setup saved_max_pfn correctly (kdump)
[PATCH] x86-64: Handle reserve_bootmem_generic beyond end_pfn
[PATCH] x86-64: shorten the x86_64 boot setup GDT to what the comment says
[PATCH] x86-64: Fix PTRACE_[SG]ET_THREAD_AREA regression with ia32 emulation.
[PATCH] x86-64: Fix partial page check to ensure unusable memory is not being marked usable.
Revert "[PATCH] MMCONFIG and new Intel motherboards"
Sergey Vlasov points out (and Vadim Lobanov concurs) that the bug it was
supposed to fix must be some unrelated memory corruption, and the "fix"
actually causes more problems:
"However, the new code does not look safe in all cases. If some other
task has opened more files while dup_fd() released oldf->file_lock, the
new code will update open_files to the new larger value. But newf was
allocated with the old smaller value of open_files, therefore subsequent
accesses to newf may try to write into unallocated memory."
Hugh Dickins [Tue, 14 Nov 2006 13:43:38 +0000 (13:43 +0000)]
[PATCH] hugetlb: fix error return for brk() entering a hugepage region
Commit cb07c9a1864a8eac9f3123e428100d5b2a16e65a causes the wrong return
value. is_hugepage_only_range() is a boolean, so we should return
-EINVAL rather than 1.
Also - we can use "mm" instead of looking up "current->mm" again.
Brian King [Mon, 13 Nov 2006 22:32:36 +0000 (16:32 -0600)]
[PATCH] libata: Convert from module_init to subsys_initcall
When building a monolithic kernel, the load order of drivers does not
work for SAS libata users, resulting in a kernel oops.
Convert libata to use subsys_initcall instead of module_init, which
ensures that libata gets loaded before any LLDD.
This is the same thing that scsi core does to solve the problem. The
load order problem was observed on ipr SAS adapters and should exist for
other SAS users as well.
Signed-off-by: Brian King <brking@us.ibm.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Gibson [Tue, 14 Nov 2006 10:03:38 +0000 (02:03 -0800)]
[PATCH] hugetlb: check for brk() entering a hugepage region
Unlike mmap(), the codepath for brk() creates a vma without first checking
that it doesn't touch a region exclusively reserved for hugepages. On
powerpc, this can allow it to create a normal page vma in a hugepage
region, causing oopses and other badness.
Add a test to prevent this. With this patch, brk() will simply fail if it
attempts to move the break into a hugepage reserved region.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Cc: Adam Litke <agl@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 14 Nov 2006 10:03:32 +0000 (02:03 -0800)]
[PATCH] hugetlb: prepare_hugepage_range check offset too
(David:)
If hugetlbfs_file_mmap() returns a failure to do_mmap_pgoff() - for example,
because the given file offset is not hugepage aligned - then do_mmap_pgoff
will go to the unmap_and_free_vma backout path.
But at this stage the vma hasn't been marked as hugepage, and the backout path
will call unmap_region() on it. That will eventually call down to the
non-hugepage version of unmap_page_range(). On ppc64, at least, that will
cause serious problems if there are any existing hugepage pagetable entries in
the vicinity - for example if there are any other hugepage mappings under the
same PUD. unmap_page_range() will trigger a bad_pud() on the hugepage pud
entries. I suspect this will also cause bad problems on ia64, though I don't
have a machine to test it on.
(Hugh:)
prepare_hugepage_range() should check file offset alignment when it checks
virtual address and length, to stop MAP_FIXED with a bad huge offset from
unmapping before it fails further down. PowerPC should apply the same
prepare_hugepage_range alignment checks as ia64 and all the others do.
Then none of the alignment checks in hugetlbfs_file_mmap are required (nor
is the check for too small a mapping); but even so, move up setting of
VM_HUGETLB and add a comment to warn of what David Gibson discovered - if
hugetlbfs_file_mmap fails before setting it, do_mmap_pgoff's unmap_region
when unwinding from error will go the non-huge way, which may cause bad
behaviour on architectures (powerpc and ia64) which segregate their huge
mappings into a separate region of the address space.
Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Adam Litke <agl@us.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nathan Lynch [Tue, 14 Nov 2006 10:03:30 +0000 (02:03 -0800)]
[PATCH] nvidiafb: fix unreachable code in nv10GetConfig
Fix binary/logical operator typo which leads to unreachable code. Noticed
while looking at other issues; I don't have the relevant hardware to test
this.
Signed-off-by: Nathan Lynch <ntl@pobox.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ian Kent [Tue, 14 Nov 2006 10:03:29 +0000 (02:03 -0800)]
[PATCH] autofs4: panic after mount fail
Resolve the panic on failed mount of an autofs filesystem originally
reported by Mao Bibo.
It addresses two issues that happen after the mount fail. The first a NULL
pointer reference to a field (pipe) in the autofs superblock info structure
and second the lack of super block cleanup by the autofs and autofs4
modules.
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nicolas Kaiser [Tue, 14 Nov 2006 10:03:28 +0000 (02:03 -0800)]
[PATCH] drivers/ide: stray bracket
Stray bracket in debug code.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Daniel Ritz [Tue, 14 Nov 2006 10:03:25 +0000 (02:03 -0800)]
[PATCH] fix via586 irq routing for pirq 5
Fix interrupt routing for via 586 bridges. pirq can be 5 which needs to be
mapped to INTD. But currently the access functions can handle only pirq
1-4. this is similar to the other via chipsets where pirq 4 and 5 are both
mapped to INTD. Fixes bugzilla #7490
Cc: Daniel Paschka <monkey20181@gmx.net> Cc: Adrian Bunk <bunk@susta.de> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Tue, 14 Nov 2006 10:03:23 +0000 (02:03 -0800)]
[PATCH] setup_irq(): better mismatch debugging
When we get a mismatch between handlers on the same IRQ, all we get is "IRQ
handler type mismatch for IRQ n". Let's print the name of the
presently-registered handler with which we got the mismatch.
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Tue, 14 Nov 2006 15:57:46 +0000 (16:57 +0100)]
[PATCH] x86-64: Fix vgetcpu when CONFIG_HOTPLUG_CPU is disabled
The vgetcpu per CPU initialization previously relied on CPU hotplug
events for all CPUs to initialize the per CPU state. That only
worked only on kernels with CONFIG_HOTPLUG_CPU enabled. On the
others some CPUs didn't get their state initialized properly
and vgetcpu wouldn't work.
Change the initialization sequence to instead run in a normal
initcall (which runs after the normal CPU bootup) and initialize
all running CPUs there. Later hotplug CPUs are still handled
with an hotplug notifier.
Andi Kleen [Tue, 14 Nov 2006 15:57:46 +0000 (16:57 +0100)]
[PATCH] x86: Add acpi_user_timer_override option for Asus boards
Timer overrides are normally disabled on Nvidia board because
they are commonly wrong, except on new ones with HPET support.
Unfortunately there are quite some Asus boards around that
don't have HPET, but need a timer override.
We don't know yet how to handle this transparently,
but at least add a command line option to force the timer override
and let them boot.
2.6.19-rc4 has broken CONFIG_CRASH_DUMP support on x86_64. It is impossible
to read out the kernel contents from /proc/vmcore because saved_max_pfn is set
to zero instead of the max_pfn value before the user map is setup.
This happens because saved_max_pfn is initialized at parse_early_param() time,
and at this time no active regions have been registered. save_max_pfn is setup
from e820_end_of_ram(), more exact find_max_pfn_with_active_regions() which
returns 0 because no regions exist.
This patch fixes this by registering before and removing after the call
to e820_end_of_ram().
Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
Steven Rostedt [Tue, 14 Nov 2006 15:57:46 +0000 (16:57 +0100)]
[PATCH] x86-64: shorten the x86_64 boot setup GDT to what the comment says
Stephen Tweedie, Herbert Xu, and myself have been struggling with a very
nasty bug in Xen. But it also pointed out a small bug in the x86_64
kernel boot setup.
The GDT limit being setup by the initial bzImage code when entering into
protected mode is way too big. The comment by the code states that the
size of the GDT is 2048, but the actual size being set up is much bigger
(32768). This happens simply because of one extra '0'.
Instead of setting up a 0x800 size, 0x8000 is set up. On bare metal this
is fine because the CPU wont load any segments unless they are
explicitly used. But unfortunately, this breaks Xen on vmx FV, since it
(for now) blindly loads all the segments into the VMCS if they are less
than the gdt limit. Since the real mode segments are around 0x3000, we are
getting junk into the VMCS and that later causes an exception.
Stephen Tweedie has written up a patch to fix the Xen side and will be
submitting that to those folks. But that doesn't excuse the GDT limit
being a magnitude too big.
AK: changed to compute true gdt size in assembler, fixed comment
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andi Kleen <ak@suse.de>
Darrick J. Wong [Tue, 14 Nov 2006 14:55:41 +0000 (09:55 -0500)]
libata: fix double-completion on error
A curious thing happens, however, when ata_qc_new_init fails to get
an ata_queued_cmd:
First, ata_qc_new_init handles the failure like this:
cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
done(cmd);
Then, we return to ata_scsi_translate and do this:
err_mem:
cmd->result = (DID_ERROR << 16);
done(cmd);
It appears to me that first we set a status code indicating that we're
ok but the device queue is full and finish the command, but then
we blow away that status code and replace it with an error flag and
finish the command a second time! That does not seem to be desirable
behavior since we merely want the I/O to wait until a command slot
frees up, not send errors up the block layer.
In the err_mem case, we should simply exit out of ata_scsi_translate
instead.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Linus Torvalds [Mon, 13 Nov 2006 19:50:28 +0000 (11:50 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
MMC: Do not set unsupported bits in OCR response
MMC: Poll card status after rescanning cards
Linus Torvalds [Mon, 13 Nov 2006 17:52:04 +0000 (09:52 -0800)]
Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/mad: Fix race between cancel and receive completion
RDMA/amso1100: Fix && typo
RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device
IB/ehca: Activate scaling code by default
IB/ehca: Use named constant for max mtu
IB/ehca: Assure 4K alignment for firmware control blocks
Roland Dreier [Mon, 13 Nov 2006 17:38:07 +0000 (09:38 -0800)]
IB/mad: Fix race between cancel and receive completion
When ib_cancel_mad() is called, it puts the canceled send on a list
and schedules a "flushed" callback from process context. However,
this leaves a window where a receive completion could be processed
before the send is fully flushed.
This is fine, except that ib_find_send_mad() will find the MAD and
return it to the receive processing, which results in the sender
getting both a successful receive and a "flushed" send completion for
the same request. Understandably, this confuses the sender, which is
expecting only one of these two callbacks, and leads to grief such as
a use-after-free in IPoIB.
Fix this by changing ib_find_send_mad() to return a send struct only
if the status is still successful (and not "flushed"). The search of
the send_list already had this check, so this patch just adds the same
check to the search of the wait_list.
Change ehca's Kconfig to activates scaling code as default. After
several measurements we saw that this feature prevents dropped packets
(UD) in stress situation. Thus, enabling it helps to improve ehca's
bandwidth through IPoIB.
Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Linus Torvalds [Mon, 13 Nov 2006 16:27:17 +0000 (08:27 -0800)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (4818): Flexcop-usb: fix debug printk
V4L/DVB (4817): Fix uses of "&&" where "&" was intended
V4L/DVB (4816): Change tuner type for Avermedia A16AR
V4L/DVB (4815): Remote support for Avermedia A16AR
V4L/DVB (4814): Remote support for Avermedia 777
V4L/DVB (4804): Fix missing i2c dependency for saa7110
V4L/DVB (4802): Cx88: fix remote control on WinFast 2000XP Expert
V4L/DVB (4795): Tda826x: use correct max frequency
Linus Torvalds [Mon, 13 Nov 2006 16:20:38 +0000 (08:20 -0800)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] cell: set ARCH_SPARSEMEM_DEFAULT in Kconfig
[POWERPC] Fix cell "new style" mapping and add debug
[POWERPC] pseries: Force 4k update_flash block and list sizes
[POWERPC] CPM_UART: Fix non-console initialisation
[POWERPC] CPM_UART: Fix non-console transmit
[POWERPC] Make sure initrd and dtb sections get into zImage correctly
Linus Torvalds [Mon, 13 Nov 2006 16:15:30 +0000 (08:15 -0800)]
Merge git://oss.sgi.com:8090/xfs/xfs-2.6
* git://oss.sgi.com:8090/xfs/xfs-2.6:
[XFS] Remove KERNEL_VERSION macros from xfs_dmapi.h
[XFS] Prevent a deadlock when xfslogd unpins inodes.
[XFS] Clean up i_flags and i_flags_lock handling.
[XFS] 956664: dm_read_invis() changes i_atime
[XFS] rename uio_read() to xfs_uio_read()
[XFS] Keep lockdep happy.
[XFS] 956618: Linux crashes on boot with XFS-DMAPI filesystem when
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Fix minor problem with previous patch
[CIFS] Fix mount failure when domain not specified
[CIFS] Explicitly set stat->blksize
[CIFS] NFS stress test generates flood of "close with pending write" messages
Alan Stern [Fri, 10 Nov 2006 20:27:57 +0000 (12:27 -0800)]
[PATCH] SCSI core: always store >= 36 bytes of INQUIRY data
This patch (as810c) copies a minimum of 36 bytes of INQUIRY data, even if
the device claims that not all of them are valid. Often badly behaved
devices put plausible data in the Vendor, Product, and Revision strings but
set the Additional Length byte to a small value. Using potentially valid
data is certainly better than allocating a short buffer and then reading
beyond the end of it, which is what we do now.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pavel Emelianov [Fri, 10 Nov 2006 20:27:56 +0000 (12:27 -0800)]
[PATCH] Fix misrouted interrupts deadlocks
While testing kernel on machine with "irqpoll" option I've caught such a
lockup:
__do_IRQ()
spin_lock(&desc->lock);
desc->chip->ack(); /* IRQ is ACKed */
note_interrupt()
misrouted_irq()
handle_IRQ_event()
if (...)
local_irq_enable_in_hardirq();
/* interrupts are enabled from now */
...
__do_IRQ() /* same IRQ we've started from */
spin_lock(&desc->lock); /* LOCKUP */
Looking at misrouted_irq() code I've found that a potential deadlock like
this can also take place:
1CPU:
__do_IRQ()
spin_lock(&desc->lock); /* irq = A */
misrouted_irq()
for (i = 1; i < NR_IRQS; i++) {
spin_lock(&desc->lock); /* irq = B */
if (desc->status & IRQ_INPROGRESS) {
2CPU:
__do_IRQ()
spin_lock(&desc->lock); /* irq = B */
misrouted_irq()
for (i = 1; i < NR_IRQS; i++) {
spin_lock(&desc->lock); /* irq = A */
if (desc->status & IRQ_INPROGRESS) {
As the second lock on both CPUs is taken before checking that this irq is
being handled in another processor this may cause a deadlock. This issue
is only theoretical.
I propose the attached patch to fix booth problems: when trying to handle
misrouted IRQ active desc->lock may be unlocked.
The problem is because of race window. When if(expand) block is executed in
dup_fd unlocking of oldf->file_lock give a window for fdtable in oldf to be
modified. So actual open_files in oldf may not match with open_files
variable.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jes Sorensen [Fri, 10 Nov 2006 20:27:49 +0000 (12:27 -0800)]
[PATCH] mspec driver build fix
Fix MSPEC driver to build for non SN2 enabled configs as the driver should
work in cached and uncached modes (no fetchop) on these systems. In
addition make MSPEC select IA64_UNCACHED_ALLOCATOR, which is required for
it and move it to arch/ia64/Kconfig to avoid warnings on non ia64
architectures running allmodconfig. Once the Kconfig code is fixed, we can
move it back.
Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Miller [Fri, 10 Nov 2006 20:27:48 +0000 (12:27 -0800)]
[PATCH] pci: don't try to remove sysfs files before they are setup.
The PCI sysfs attributes are created after the initial PCI bus scan. With
the addition of more return value checking and assertions in the device and
sysfs layers we now can get dumps like this on sparc64:
It's triggering because removal of the "config" PCI sysfs file for the
device fails.
On sparc64, after probing the device, we'll delete the PCI device via
pci_remove_bus_device() if we cannot find the firmware device tree node
corresponding to it.
This is fine, but at this point the sysfs files for the PCI device won't be
setup yet.
So we should not try to do anything in pci_remove_sysfs_dev_files() if
pci_sysfs_init() has not run yet.
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Dumazet [Fri, 10 Nov 2006 20:27:48 +0000 (12:27 -0800)]
[PATCH] vmalloc: optimization, cleanup, bugfixes
- reorder 'struct vm_struct' to speedup lookups on CPUS with small cache
lines. The fields 'next,addr,size' should be now in the same cache line,
to speedup lookups.
- One minor cleanup in __get_vm_area_node()
- Bugfixes in vmalloc_user() and vmalloc_32_user() NULL returns from
__vmalloc() and __find_vm_area() were not tested.
[akpm@osdl.org: remove redundant BUG_ONs] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Thu, 9 Nov 2006 20:36:44 +0000 (17:36 -0300)]
V4L/DVB (4818): Flexcop-usb: fix debug printk
.. fix debug printk. Why, oh why, one would want to do
(u16 & 0xff) << 8
and print it with %02x format? Acked-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
pasky@ucw.cz [Sun, 12 Nov 2006 17:24:57 +0000 (14:24 -0300)]
V4L/DVB (4816): Change tuner type for Avermedia A16AR
This changes it from TDA8290 which is allegedly very unlikely to TD1316 which
is allegedly very likely. I didn't get it to work with either, but expected
that this got applied when Mauro sent it to me, so here it goes again; feel
free to drop it to the floor. :-)
Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
pasky@ucw.cz [Sun, 12 Nov 2006 17:23:32 +0000 (14:23 -0300)]
V4L/DVB (4815): Remote support for Avermedia A16AR
The remote as well as the GPIO interface is the same as what comes with 777.
For an example of mplayer lirc configuration, see
http://pasky.or.cz/~pasky/dev/v4l/lircrc
Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
pasky@ucw.cz [Sun, 12 Nov 2006 17:22:32 +0000 (14:22 -0300)]
V4L/DVB (4814): Remote support for Avermedia 777
I didn't test it personally since I don't have this card, but A16AR uses the
same interface and that one certainly does work perfectly (see the next patch).
This patch was originally sent in
http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2
https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html
but never got applied. This version has some trivial modifications and drops
the weird gpio hack (it's not clear what practical purpose does it serve).
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (4804): Fix missing i2c dependency for saa7110
drivers/media/video/saa7110.c:112: undefined reference to `i2c_master_send'
drivers/built-in.o: In function `saa7110_read':
drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte'
drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte'
David Chinner [Sat, 11 Nov 2006 07:05:00 +0000 (18:05 +1100)]
[XFS] Prevent a deadlock when xfslogd unpins inodes.
The previous fixes for the use after free in xfs_iunpin left a nasty log
deadlock when xfslogd unpinned the inode and dropped the last reference to
the inode. the ->clear_inode() method can issue transactions, and if the
log was full, the transaction could push on the log and get stuck trying
to push the inode it was currently unpinning.
To fix this, we provide xfs_iunpin a guarantee that it will always have a
valid xfs_inode <-> linux inode link or a particular flag will be set on
the inode. We then use log forces during lookup to ensure transactions are
completed before we recycle the inode. This ensures that xfs_iunpin will
never use the linux inode after it is being freed, and any lookup on an
inode on the reclaim list will wait until it is safe to attach a new linux
inode to the xfs inode.
David Rientjes [Thu, 9 Nov 2006 03:49:15 +0000 (19:49 -0800)]
[PATCH] drivers cris: return on NULL dev_alloc_skb()
If the next descriptor array entry cannot be allocated by dev_alloc_skb(),
return immediately so it is not dereferenced later. We cannot register the
device with a partial descriptor list.
Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: David Rientjes <rientjes@cs.washington.edu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
John Rose [Wed, 8 Nov 2006 16:07:30 +0000 (10:07 -0600)]
[POWERPC] pseries: Force 4k update_flash block and list sizes
The enablement of 64k pages on pseries platforms exposed a bug in
the RTAS mechanism for updating firmware. RTAS assumes 4k for flash
block and list sizes, and use of any other sizes results in a failure,
even though PAPR does not specify any such requirement.
This patch changes the rtas_flash module to force the use of 4k memory
block and list sizes when preparing and sending a firmware image to
RTAS. The rtas_flash function now uses a slab cache of 4k blocks with
4k alignment, rather than get_zeroed_page(), to allocate the memory for
the flash blocks and lists. The 4k alignment requirement is specified
in PAPR.
Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
The cpm_uart driver is initialised incorrectly, if there is a frame buffer
console, and CONFIG_SERIAL_CPM_CONSOLE is defined. The driver fails to
call cpm_uart_init_portdesc() and set_lineif() in this case.
Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
puts the shell into endless uninterruptible sleep, since the
transmitter is stopped after the first write, and is not enabled
before the shutdown function of the second write. Thus the transmit
buffers are never emptied.
Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
IB/ehca: Assure 4K alignment for firmware control blocks
Assure 4K alignment for firmware control blocks in 64K page mode,
because kzalloc()'s result address might not be 4K aligned if 64K
pages are enabled. Thus, we introduce wrappers called
ehca_{alloc,free}_fw_ctrlblock(), which use a slab cache for objects
with 4K length and 4K alignment in order to alloc/free firmware
control blocks in 64K page mode. In 4K page mode those wrappers just
are defines of get_zeroed_page() and free_page().
Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Timo Teras [Wed, 25 Oct 2006 06:37:41 +0000 (09:37 +0300)]
MMC: Poll card status after rescanning cards
Some broken cards seem to process CMD1 even in stand-by state. The result is
that the card replies with ILLEGAL_COMMAND error for the next command sent
after rescanning. Currently the next command is select card, which would
return the error. But CMD7 does actually succeed and retries of the command
will timeout. The workaround is to poll card status after CMD1 to clear the
pending error.
Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Paul Mackerras [Thu, 9 Nov 2006 05:00:06 +0000 (16:00 +1100)]
[POWERPC] Make sure initrd and dtb sections get into zImage correctly
The "wrapper" script was using the wrong names for the initrd and
dtb (device-tree blob) sections. This fixes it, and also ensures
the symbols for the start and end of the dtb get defined correctly.
J. Bruce Fields [Thu, 9 Nov 2006 01:44:59 +0000 (17:44 -0800)]
[PATCH] nfsd: fix spurious error return from nfsd_create in async case
Commit 6264d69d7df654ca64f625e9409189a0e50734e9 modified the nfsd_create()
error handling in such a way that nfsd_create will usually return
nfserr_perm even when succesful, if the export has the async export option.
This introduced a regression that could cause mkdir() to always return a
permissions error, even though the directory in question was actually
succesfully created.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6 / log