Bob Peterson [Wed, 12 Dec 2007 01:29:17 +0000 (19:29 -0600)]
[GFS2] Function meta_read optimization
This patch optimizes function gfs2_meta_read. Basically, gfs2_meta_wait
was being called regardless of whether a disk read was requested.
This just pulls that wait into the if that triggers the read.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Wed, 12 Dec 2007 01:13:54 +0000 (19:13 -0600)]
[GFS2] Reorganize function gfs2_glmutex_lock
This patch optimizes the function gfs2_glmutex_lock.
The basic theory is: Why bother initializing a holder, setting up
wait bits and then waiting on them, if you know the glock can be
yours. So the holder stuff is placed inside the if checking if the
glock is locked. This one needs careful scrutiny because changing
anything to do with locking should strike terror into one's heart.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Wed, 12 Dec 2007 01:00:16 +0000 (19:00 -0600)]
[GFS2] Run through full bitmaps quicker in gfs2_bitfit
I eliminated the passing of an unused parameter into gfs2_bitfit called rgd.
This also changes the gfs2_bitfit code that searches for free (or used) blocks.
Before, the code was trying to check for bytes that indicated 4 blocks in
the undesired state. The problem is, it was spending more time trying to
do this than it actually was saving. This version only optimizes the case
where we're looking for free blocks, and it checks a machine word at a time.
So on 32-bit machines, it will check 32-bits (16 blocks) and on 64-bit
machines, it will check 64-bits (32 blocks) at a time. The compiler
optimizes that quite well and we save some time, especially when running
through full bitmaps (like the bitmaps allocated for the journals).
There's probably a more elegant or optimized way to do this, but I haven't
thought of it yet. I'm open to suggestions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Wed, 12 Dec 2007 00:49:21 +0000 (18:49 -0600)]
[GFS2] Journal extent mapping
This patch saves a little time when gfs2 writes to the journals by
keeping a mapping between logical and physical blocks on disk.
That's better than constantly looking up indirect pointers in
buffers, when the journals are several levels of indirection
(which they typically are).
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Mon, 10 Dec 2007 20:13:27 +0000 (14:13 -0600)]
[GFS2] Remove function gfs2_get_block
This patch is just a cleanup. Function gfs2_get_block() just calls
function gfs2_block_map reversing the last two parameters. By
reversing the parameters, gfs2_block_map() may be called directly
and function gfs2_get_block may be eliminated altogether.
Since this function is done for every block operation,
this streamlines the code and makes it a little bit more efficient.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
David Teigland [Thu, 6 Dec 2007 15:35:25 +0000 (09:35 -0600)]
[GFS2] use pid for plock owner for nfs clients
The fl_owner is that of lockd when posix locks arrive from nfs
clients, so it can't be used to distinguish between lock holders.
Use fl_pid as owner instead; it's the pid of the process on the
nfs client.
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Abhijith Das [Thu, 29 Nov 2007 20:13:54 +0000 (14:13 -0600)]
[GFS2] patch to check for recursive lock requests in gfs2_rename code path
A certain scenario in the rename code path triggers a kernel BUG()
because it accidentally does recursive locking The first lock is
requested to unlink an already existing inode (replacing a file) and the
second lock is requested when the destination directory needs to alloc
some space. It is rare that these two
events happen during the same rename call, and even more rare that these
two instances try to lock the same rgrp. It is, however, possible.
https://bugzilla.redhat.com/show_bug.cgi?id=404711
Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Wendy Cheng [Thu, 29 Nov 2007 22:56:51 +0000 (17:56 -0500)]
[GFS2] Remove lock methods for lock_nolock protocol
GFS2 supports two modes of locking - lock_nolock for single node filesystem
and lock_dlm for cluster mode locking. The gfs2 lock methods are removed from
file operation table for lock_nolock protocol. This would allow VFS to handle
posix lock and flock logics just like other in-tree filesystems without
duplication.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Ryan O'Hara [Wed, 21 Nov 2007 17:54:54 +0000 (11:54 -0600)]
[GFS2] remove unnecessary permission checks
Remove read/write permission() checks from xattr operations.
VFS layer is already handling permission for xattrs via the
xattr_permission() call, so there is no need for gfs2 to
check permissions. Futhermore, using permission() for SELinux
xattrs ops is incorrect.
Signed-off-by: Ryan O'Hara <rohara@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The issue is indeed UP vs SMP and it is totally random.
spin_is_locked() is a bad assertion because there is no correct answer on UP.
on UP spin_is_locked() has to return either one value or another, always.
This means that in my setup I am lucky enough to trigger the issue and your you
are lucky enough not to.
the patch in attachment removes the bogus calls to BUG_ON and according to David
(in CC and thanks for the long explanation on the problem) we can rely upon
things like lockdep to find problem that might be trying to catch.
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
David Teigland [Thu, 15 Nov 2007 15:01:13 +0000 (09:01 -0600)]
[GFS2] tidy up error message
Print error with log_error() to be consistent with others.
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
[GFS2] Check for installation of mount helpers for DLM mounts
The patch is a fix to abort mount if the mount.gfs* and possible
umount.* are missing from /sbin.
While we do what we can to guarantee that they are installed properly in
userland (CVS HEAD), we want to make sure that mount still aborts properly.
The only sign of missing helpers is that lock_dlm will receive no mount options
at all. According to David the problem does not exist for lock_nolock as the
helpers are not required.
The patch has been tested for both gfs and gfs2 and it works as expected. The
lack of mount.gfs* will generate an error that is propagated to mount:
oot@node1:~# mount -t gfs2 /dev/nbd2 /mnt/
mount: wrong fs type, bad option, bad superblock on /dev/nbd2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
[ 3513.303346] GFS2: fsid=: Trying to join cluster "lock_dlm", "gutsy:gfs2"
[ 3513.304546] DLM/GFS2/GFS ERROR: (u)mount helpers are not installed properly!
[ 3513.306290] GFS2: fsid=: can't mount proto=lock_dlm, table=gutsy:gfs2, hostdata=
You might want to notice that it will also avoid mount to hang or fail silently
or with strange errors that will require the cluster to reboot/restart before
you can actually mount the filesystem again.
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We only care about the content of the jindex in two cases,
one is when we mount the fs and the other is when we need
to recover another journal. In both cases we have to update
the jindex anyway, so there is no point in updating it
periodically between times, so this removes it to simplify
gfs2_logd.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
[GFS2] Use atomic_t for journal free blocks counter
This patch changes the counter which keeps track of the free
blocks in the journal to an atomic_t in preparation for the
following patch which will update the log reservation code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The only reason for adding glocks to the journal was to keep track
of which locks required a log flush prior to release. We add a
flag to the glock to allow this check to be made in a simpler way.
This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64)
and means that we can avoid extra work during the journal flush.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
David Teigland [Wed, 7 Nov 2007 15:03:56 +0000 (09:03 -0600)]
[GFS2] check kthread_should_stop when waiting
Use wait_event_interruptible() in the lock_dlm thread instead
of an open coded equivalent, and include a kthread_should_stop()
check in the wait test so we don't miss a kthread_stop().
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Fri, 2 Nov 2007 14:37:15 +0000 (09:37 -0500)]
[GFS2] Given device ID rather than s_id in "id" sysfs file
This patch changes the /sys/fs/gfs2/<s_id>/id file to give the device
id "major:minor" rather than the s_id. That enables gfs2_tool to
match devices properly (by id, not name) when locating the tuning files.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The HIF_MUTEX and HIF_PROMOTE flags were set on the glock holders
depending upon which of the two waiters lists they were going to
be queued upon. They were then tested when the holders were taken
off the lists to ensure that the right type of holder was being
dequeued.
Since we are already using separate lists, there doesn't seem a
lot of point having these flags as well, and since setting them
and testing them is in the fast path for locking and unlocking
glock, this patch removes them.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Previously we were doing (write data, wait for data, write metadata, wait
for metadata). After this patch we so (write metadata, write data, wait for
data, wait for metadata) which should be more efficient.
Also I noticed that the drop_bh and xmote_bh functions were almost
identical. In fact the only difference was a single test, and that
test is such that in the drop_bh case, it would always evaluate to
the correct result. As such we can use the xmote_bh functions in
all the places where we were using the drop_bh function and remove
the drop_bh functions.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This call to reclaim glocks is not needed, and in particular we don't want it
in the fast path for locking glocks. The limit was entirely arbitrary anyway
and we can't expect users to adjust things like this, the remaining code will
do the right thing on its own.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
[GFS2] Don't hold page lock when starting transaction
This is an addendum to the new AOPs work which moves the point
at which we take the page lock so that we don't get it until
the last possible moment. This resolves a conflict between
starting transactions and the page lock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch resolves a lock ordering issue where we had been getting
a transaction lock in the wrong order with respect to the page lock.
By using writepages rather than just writepage, it is then possible
to start a transaction before locking the page, and thus matching the
locking order elsewhere in the code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch splits gfs2_writepage into separate functions for each of
the three cases: writeback, ordered and journalled. As a result
it becomes a lot easier to see what each one is doing. The common
code is moved into gfs2_writepage_common.
This fixes a performance bug where we were doing more work than
strictly required in the ordered write case.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Just like ext3 we now have three sets of address space operations
to cover the cases of writeback, ordered and journalled data
writes. This means that the individual operations can now become
less complicated as we are able to remove some of the tests for
file data mode from the code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds a function "gfs2_is_writeback()" along the lines of the
existing "gfs2_is_jdata()" in order to clean up the code and make
the various tests for the inode mode more obvious. It also fixes
the PageChecked() logic where we were resetting the flag too early
in the case of an error path.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The i_cache was designed to keep references to the indirect blocks
used during block mapping so that they didn't have to be looked
up continually. The idea failed because there are too many places
where the i_cache needs to be freed, and this has in the past been
the cause of many bugs.
In addition there was no performance benefit being gained since the
disk blocks in question were cached anyway. So this patch removes
it in order to simplify the code to prepare for other changes which
would otherwise have had to add further support for this feature.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This cleans up the mmap() code path for GFS2 by implementing the
page_mkwrite function for GFS2. We are thus able to use the
generic filemap_fault function for our ->fault() implementation.
This now means that shared writable mappings will be much more
efficiently shared across the cluster if there is a reasonable
proportion of read activity (the greater proportion, the better).
As a side effect, it also reduces the size of the code, removes
special cases from readpage and readpages, and makes the code
path easier to follow.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As requested by Christoph, this patch cleans up GFS2's internal
read function so that it no longer uses the do_generic_mapping_read
function. This function is obsolete and GFS2 is the last user of it.
As a side effect the internal read code gets smaller and easier
to read and gfs2_readpage is split into two. One function has the locking
and the other function has the rest of the logic.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org>
Wendy Cheng [Fri, 5 Oct 2007 04:27:58 +0000 (00:27 -0400)]
[GFS2] Handle multiple glock demote requests
Fix a race condition where multiple glock demote requests are sent to
a node back-to-back. This patch does a check inside handle_callback()
to see whether a demote request is in progress. If true, it sets a flag
to make sure run_queue() will loop again to handle the new request,
instead of erronously setting gl_demote_state to a different state.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Kalle Valo [Thu, 24 Jan 2008 22:00:40 +0000 (14:00 -0800)]
spi: omap2_mcspi PIO RX fix
Before transmission of the last word in PIO RX_ONLY mode rx+tx mode
is enabled:
/* prevent last RX_ONLY read from triggering
* more word i/o: switch to rx+tx
*/
if (c == 0 && tx == NULL)
mcspi_write_cs_reg(spi,
OMAP2_MCSPI_CHCONF0, l);
But because c is decremented after the test, c will never be zero and
rx+tx will not be enabled. This breaks RX_ONLY mode PIO transfers.
Fix it by decrementing c in the beginning of the various I/O loops.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 24 Jan 2008 21:35:10 +0000 (13:35 -0800)]
Revert "mac80211: warn when receiving frames with unaligned data"
This reverts commit 81100eb80add328c4d2a377326f15aa0e7236398 for the
release, to avoid the unnecessary warning noise that is only really
relevant to wireless driver developers.
The warning will probably go right back in after I cut the release, but
at least we won't unnecessarily worry users.
Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 24 Jan 2008 13:49:54 +0000 (05:49 -0800)]
slab: partially revert list3 changes
Partial revert the changes made by 04231b3002ac53f8a64a7bd142fde3fa4b6808c6
to the kmem_list3 management. On a machine with a memoryless node, this
BUG_ON was triggering
Larry Woodman [Thu, 24 Jan 2008 13:49:25 +0000 (05:49 -0800)]
fix hugepages leak due to pagetable page sharing
The shared page table code for hugetlb memory on x86 and x86_64
is causing a leak. When a user of hugepages exits using this code
the system leaks some of the hugepages.
-------------------------------------------------------
Part of /proc/meminfo just before database startup:
HugePages_Total: 5500
HugePages_Free: 5500
HugePages_Rsvd: 0
Hugepagesize: 2048 kB
Just before shutdown:
HugePages_Total: 5500
HugePages_Free: 4475
HugePages_Rsvd: 0
Hugepagesize: 2048 kB
The problem occurs durring a fork, in copy_hugetlb_page_range(). It
locates the dst_pte using huge_pte_alloc(). Since huge_pte_alloc() calls
huge_pmd_share() it will share the pmd page if can, yet the main loop in
copy_hugetlb_page_range() does a get_page() on every hugepage. This is a
violation of the shared hugepmd pagetable protocol and creates additional
referenced to the hugepages causing a leak when the unmap of the VMA
occurs. We can skip the entire replication of the ptes when the hugepage
pagetables are shared. The attached patch skips copying the ptes and the
get_page() calls if the hugetlbpage pagetable is shared.
[akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Larry Woodman <lwoodman@redhat.com> Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Ken Chen <kenchen@google.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
: Stefan Roese <sr@denx.de> said:
> ppc: 4xx: sysctl table check failed: /kernel/l2cr .1.31 Missing strategy
>
> I'm seeing this error message when booting an recent arch/ppc kernel on
> 4xx platforms (tested on Ocotea and other 4xx platforms). Booting NFS
> rootfs still works fine, but this message kind of makes me "nervous".
> This is not seen on 4xx arch/powerpc platforms. Here the bootlog:
Because the data field was never filled and a binary sysctl handler was
never written this sysctl has never been usable through the sys_sysctl
interface. So just remove the binary sysctl number. Making the kernel
sanity checks happy.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Reported-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
that certain wireless drivers ended up having their name in module
memory, which would then crash the kernel on module unload.
The patch he proposed was a bit clumsy in that it increased the size of
a lockdep entry significantly; the patch below tries another approach,
it checks, on module teardown, if the name of a class is in module space
and then zaps the class. This is very similar to what we already do
with keys that are in module space.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Márton Németh [Thu, 24 Jan 2008 03:33:06 +0000 (22:33 -0500)]
ACPI: EC: add leading zeros to debug messages
Add leading zeros to pr_debug() calls. For example if x=0x0a, the format
"0x%2x" will result the string "0x a", the format "0x%2.2x" will result "0x0a".
Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
sis190: scheduling while atomic error
sis190: mdio operation failure is not correctly detected
sis190: remove duplicate INIT_WORK
sis190: add cmos ram access code for the SiS19x/968 chipset pair
[INET]: Fix truesize setting in ip_append_data
[NETNS]: Re-export init_net via EXPORT_SYMBOL.
iwlwifi: fix possible read attempt on ucode that is not available
[IPV4]: Add missing skb->truesize increment in ip_append_page().
[TULIP] DMFE: Fix SROM parsing regression.
[BLUETOOTH]: Move children of connection device to NULL before connection down.
Len Brown [Thu, 24 Jan 2008 01:06:41 +0000 (20:06 -0500)]
ACPI: Delete Intel Customer Reference Board (CRB) from OSI(Linux) DMI list
Linux does not want BIOS writers to invoke _OSI(Linux) -
for in the field it causes more Windows incompatibility problems
than it solves.
So when it is seen in the BIOS for an Intel Customer Reference Board,
Linux should ignore its effect by default, and should complain loudly.
Otherwise, the reference BIOS will go unfixed, and the bad BIOS
will spread to the field.
Users of this board can get the old behavior with "acpi_osi=Linux"
As this was the only entry, delete acpi_osl_dmi_table[].
Herbert Xu [Wed, 23 Jan 2008 06:39:26 +0000 (22:39 -0800)]
[INET]: Fix truesize setting in ip_append_data
As it is ip_append_data only counts page fragments to the skb that
allocated it. As such it means that the first skb gets hit with a
4K charge even though it might have only used a fraction of it while
all subsequent skb's that use the same page gets away with no charge
at all.
This bug was exposed by the UDP accounting patch.
[ The wmem_alloc bumping needs to be moved with the truesize,
noticed by Takahiro Yasui. -DaveM ]
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Wed, 23 Jan 2008 06:05:33 +0000 (22:05 -0800)]
[NETNS]: Re-export init_net via EXPORT_SYMBOL.
init_net is used added as a parameter to a lot of old API calls, f.e.
ip_dev_find. These calls were exported as EXPORT_SYMBOL. So, export init_net
as EXPORT_SYMBOL to keep networking API consistent.
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Jan 2008 07:20:58 +0000 (23:20 -0800)]
[TULIP] DMFE: Fix SROM parsing regression.
Changeset 16b110c3fd760620b4a787db6ed512fe531ab1b5 (dmfe warning fix)
bothed up the offsets read from the SROM so that it doesn't read the
same datums it used to.
The change made transformations like turning:
"srom + 34"
into
"(__le32 *)srom + 34/4"
which doesn't work because 4 does not divide evenly
into 34 so we're using a different pointer offset
than in the original code.
I've changed theses cases in dmfe_parse_srom() to
consistently use "(type *)(srom + offset)" preserving
the offsets from the original code.
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Young [Tue, 22 Jan 2008 06:35:21 +0000 (22:35 -0800)]
[BLUETOOTH]: Move children of connection device to NULL before connection down.
The rfcomm tty device will possibly retain even when conn is down, and
sysfs doesn't support zombie device moving, so this patch move the tty
device before conn device is destroyed.
For the bug refered please see :
http://lkml.org/lkml/2007/12/28/87
Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jordan Crouse [Tue, 22 Jan 2008 22:30:16 +0000 (23:30 +0100)]
x86: GEODE fix a race condition in the MFGPT timer tick
When we set the MFGPT timer tick, there is a chance that we'll
immediately assert an event. If for some reason the IRQ routing
for this clock has been setup for some other purpose, then we
could end up firing an interrupt into the SMM handler or worse.
This rearranges the timer tick init function to initalize the handler
before we set up the MFGPT clock to make sure that even if we get
an event, it will go to the handler.
Furthermore, in the handler we need to make sure that we clear the
event, even if the timer isn't running.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Tested-by: Arnd Hannemann <hannemann@i4.informatik.rwth-aachen.de>
Fix typo in arch/powerpc/boot/flatdevtree_env.h.
There is no Documentation/networking/ixgbe.txt.
README.cycladesZ is now in Documentation/.
wavelan.p.h is now in drivers/net/wireless/.
HFS.txt is now Documentation/filesystems/hfs.txt.
OSS-files are now in sound/oss/.
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Fries [Tue, 22 Jan 2008 11:31:39 +0000 (03:31 -0800)]
W1: w1_therm.c is flagging 0C etc as invalid
The extra rom[0] check is flagging valid temperatures as invalid when
there is already a CRC data transmission check.
w1_therm_read_bin()
if (rom[8] == crc && rom[0])
verdict = 1;
Requiring rom[0] to be non-zero will flag as invalid temperature
conversions when the low byte is zero, specifically the temperatures 0C,
16C, 32C, 48C, -16C, -32C, and -48C.
The CRC check is produced on the device for the previous 8 bytes and is
required to ensure the data integrity in transmission. I don't see why the
extra check for rom[0] being non-zero is in there. Evgeniy Polyakov didn't
know either. Just for a check I unplugged the sensor, executed a
temperature conversion, and read the results. The read was all ff's, which
also failed the CRC, so it doesn't need to protect against a disconnected
sensor.
I have more extensive patches in the work, but these two trivial ones will
do for today. I would like to hear from people who use the ds2490 USB to
one wire dongle. 1 if you would be willing to test the patches as I
currently only have the one sensor on a short parisite powered wire, 2 if
there is any cheap sources for the ds2490.
Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct the decoding of negative C temperatures. The code did a binary OR
of two bytes to make a 16 bit value, but assignd it to an integer. This
caused the value to not be sign extended and to loose that it was a
negative number in the assignment.
Before the patch (in my freezer),
w1_slave
ed fe 4b 46 7f ff 03 10 e4 : crc=e4 YES
ed fe 4b 46 7f ff 03 10 e4 t=4078
With the patch,
e3 fe 4b 46 7f ff 0d 10 81 : crc=81 YES
e3 fe 4b 46 7f ff 0d 10 81 t=-17
Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bjorn Helgaas [Tue, 22 Jan 2008 12:21:03 +0000 (07:21 -0500)]
hwmon: (it87) request only Environment Controller ports
The IT8705F and related parts are Super I/O controllers that contain
many separate devices.
Some BIOSes describe IT8705F I/O port usage under a motherboard device
(PNP0C02) with overlapping regions, e.g., 0x290-0x29f and 0x290-0x294.
The it87 driver supports only the Environment Controller, which requires
only two ISA ports, but it used to request an eight-port range. If that
range exceeds a range reported by the BIOS, as 0x290-0x297 would, the
request fails, and the it87 driver cannot claim the device.
This patch makes the it87 driver request only the two ports used for the
Environment Controller device.
Systems where this problem has been reported:
Gigabyte GA-K8N Ultra 9
Gigabyte M56S-S3
Gigabyte GA-965G-DS3
The patch above increases the number of PNP port resources we support.
Prior to this patch, we ignored some port resources, which masked the
it87 problem.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
It tried to fix long standing bugzilla entries, but the solution was
reported to break other systems. The reporter of
http://bugzilla.kernel.org/show_bug.cgi?id=9791
tracked it down to this commit and confirmed that reverting the patch
restores the correct behaviour. It's too late in the release cycle to
find a better solution than reverting the commit to avoid regressions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu>
Sam Ravnborg [Tue, 22 Jan 2008 01:25:37 +0000 (17:25 -0800)]
[SPARC64]: Fix section error in sparcspkr
With a sparc64 defconfig modified to set CONFIG_HOTPLUG=n
the following error happened during link of vmlinux:
local symbol 0: discarded in section `.devexit.text' from drivers/built-in.o
local symbol 1: discarded in section `.devexit.text' from drivers/built-in.o
(The error message above is from kbuild.git but it happens in mainline too)
The error happens becase there is a reference from .text/.data to a
function marked __devexit. With CONFIG_HOTPLUG=n all code marked
__devexit are discarded and the linker complains.
It was tracked down to sparcspkr.c which were missing __devexit_p()
around the function pointers.
Unfortunately modpost did not catch this since modpost do not warn
about references from .data to .devexit from variables named *_driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6 / log