Jean Delvare [Tue, 16 Oct 2007 08:28:18 +0000 (01:28 -0700)]
rtc-pcf8583: Check for i2c adapter functionality
Not all i2c adapters support I2C-level messaging. Check that the adapter
does before probing for a PCF8583 chip, as the driver makes use of
i2c_transfer and i2c_master_send.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Atsushi Nemoto [Tue, 16 Oct 2007 08:28:18 +0000 (01:28 -0700)]
rtc: make rtc-ds1742 driver hotplug-aware
The rtc-ds1742 platform driver name doesn't match its module name,
which might prevents it from properly hotplugging. There is only two
in-tree user of its driver, which are fixed by this patch too.
Mark Zhan [Tue, 16 Oct 2007 08:28:17 +0000 (01:28 -0700)]
rtc-dev: no need to convert file->private_data to rtc device
In rtc-dev.c, when a rtc device is opened, file->private_data is already
attached with the rtc device pointer, so there is no need to call
to_rtc_device() to convert file->private_data to a rtc device pointer.
Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Tue, 16 Oct 2007 08:28:16 +0000 (01:28 -0700)]
rtc_irq_set_freq() requires power-of-two and associated kerneldoc
RTC periodic IRQs are only defined to work for 2^N Hz values. This patch
moves that validity check into the infrastructure, so drivers don't need to
check it; and adds kerneldoc for the two interface functions related to
periodic IRQs. (One of which was quite mysterious until its first use was
recently checked in!)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:14 +0000 (01:28 -0700)]
ecryptfs: clean up page flag handling
The functions that eventually call down to ecryptfs_read_lower(),
ecryptfs_decrypt_page(), and ecryptfs_copy_up_encrypted_with_header()
should have the responsibility of managing the page Uptodate
status. This patch gets rid of some of the ugliness that resulted from
trying to push some of the page flag setting too far down the stack.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:11 +0000 (01:28 -0700)]
eCryptfs: convert mmap functions to use persistent file
Convert readpage, prepare_write, and commit_write to use read_write.c
routines. Remove sync_page; I cannot think of a good reason for implementing
that in eCryptfs.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:10 +0000 (01:28 -0700)]
eCryptfs: make open, truncate, and setattr use persistent file
Rather than open a new lower file for every eCryptfs file that is opened,
truncated, or setattr'd, instead use the existing lower persistent file for
the eCryptfs inode. Change truncate to use read_write.c functions. Change
ecryptfs_getxattr() to use the common ecryptfs_getxattr_lower() function.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:10 +0000 (01:28 -0700)]
eCryptfs: update metadata read/write functions
Update the metadata read/write functions and grow_file() to use the
read_write.c routines. Do not open another lower file; use the persistent
lower file instead. Provide a separate function for
crypto.c::ecryptfs_read_xattr_region() to get to the lower xattr without
having to go through the eCryptfs getxattr.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:07 +0000 (01:28 -0700)]
eCryptfs: read_write.c routines
Add a set of functions through which all I/O to lower files is consolidated.
This patch adds a new inode_info reference to a persistent lower file for each
eCryptfs inode; another patch later in this series will set that up. This
persistent lower file is what the read_write.c functions use to call
vfs_read() and vfs_write() on the lower filesystem, so even when reads and
writes come in through aops->readpage and aops->writepage, we can satisfy them
without resorting to direct access to the lower inode's address space.
Several function declarations are going to be changing with this patchset.
For now, in order to keep from breaking the build, I am putting dummy
parameters in for those functions.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:07 +0000 (01:28 -0700)]
ecryptfs: fix error handling
The error paths and the module exit code need work. sysfs
unregistration is not the right place to tear down the crypto
subsystem, and the code to undo subsystem initializations on various
error paths is unnecessarily duplicated. This patch addresses those
issues.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:05 +0000 (01:28 -0700)]
eCryptfs: remove header_extent_size
There is no point to keeping a separate header_extent_size and an extent_size.
The total size of the header can always be represented as some multiple of
the regular data extent size.
[randy.dunlap@oracle.com: ecryptfs: fix printk format warning] Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:04 +0000 (01:28 -0700)]
eCryptfs: Use generic_file_splice_read()
eCryptfs is currently just passing through splice reads to the lower
filesystem. This is obviously incorrect behavior; the decrypted data is
what needs to be read, not the lower encrypted data. I cannot think of any
good reason for eCryptfs to implement splice_read, so this patch points the
eCryptfs fops splice_read to use generic_file_splice_read.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Reviewed-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton wrote:
> > struct mutex *tfm_mutex = NULL;
>
> This initialisation looks like it's here to kill bogus gcc warning
> (if it is, it should have been commented). Please investigate
> uninitialized_var() and __maybe_unused sometime.
Remove some unnecessary variable initializations. There may be a few
more such intializations remaining in the code base; a future patch
will take care of those.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:02 +0000 (01:28 -0700)]
eCryptfs: kerneldoc fixes for crypto.c and keystore.c
Andrew Morton wrote:
From: mhalcrow@us.ibm.com <mhalcrow@halcrow.austin.ibm.com>
> > +/**
> > + * decrypt_passphrase_encrypted_session_key - Decrypt the session key
> > + * with the given auth_tok.
> > *
> > * Returns Zero on success; non-zero error otherwise.
> > */
>
> That comment purports to be a kerneldoc-style comment. But
>
> - kerneldoc doesn't support multiple lines on the introductory line
> which identifies the name of the function (alas). So you'll need to
> overflow 80 cols here.
>
> - the function args weren't documented
>
> But the return value is! People regularly forget to do that. And
> they frequently forget to document the locking prerequisites and the
> permissible calling contexts (process/might_sleep/hardirq, etc)
>
> (please check all ecryptfs kerneldoc for this stuff sometime)
This patch cleans up some of the existing comments and makes a couple
of line break tweaks. There is more work to do to bring eCryptfs into
full kerneldoc-compliance.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:00 +0000 (01:28 -0700)]
eCryptfs: collapse flag set into one statement
Andrew Morton wrote:
> > + crypt_stat->flags |= ECRYPTFS_ENCRYPTED;
> > + crypt_stat->flags |= ECRYPTFS_KEY_VALID;
>
> Maybe the compiler can optimise those two statements, but we'd
> normally provide it with some manual help.
This patch provides the compiler with some manual help for
optimizing the setting of some flags.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:28:00 +0000 (01:28 -0700)]
eCryptfs: remove unnecessary BUG_ON
Andrew Morton wrote:
> > + mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
> > + BUG_ON(mount_crypt_stat->num_global_auth_toks == 0);
> > + mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
>
> That's odd-looking. If it was a bug for num_global_auth_toks to be
> zero, and if that mutex protects num_global_auth_toks then as soon
> as the lock gets dropped, another thread can make
> num_global_auth_toks zero, hence the bug is present. Perhaps?
That was serving as an internal sanity check that should not have made
it into the final patch set in the first place. This patch removes it.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 16 Oct 2007 08:27:59 +0000 (01:27 -0700)]
ecryptfs: printk warning fixes
fs/ecryptfs/keystore.c: In function 'parse_tag_1_packet':
fs/ecryptfs/keystore.c:557: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'parse_tag_3_packet':
fs/ecryptfs/keystore.c:690: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'parse_tag_11_packet':
fs/ecryptfs/keystore.c:836: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'write_tag_1_packet':
fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
fs/ecryptfs/keystore.c: In function 'write_tag_11_packet':
fs/ecryptfs/keystore.c:1472: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'write_tag_3_packet':
fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
fs/ecryptfs/keystore.c: In function 'ecryptfs_generate_key_packet_set':
fs/ecryptfs/keystore.c:1778: warning: passing argument 2 of 'write_tag_11_packet' from incompatible pointer type
fs/ecryptfs/main.c: In function 'ecryptfs_parse_options':
fs/ecryptfs/main.c:363: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:27:58 +0000 (01:27 -0700)]
eCryptfs: fix Tag 11 writing code
Fix up the Tag 11 writing code to handle size limits and boundaries more
explicitly. It looks like the packet length was 1 shorter than it should have
been, chopping off the last byte of the key identifier. This is largely
inconsequential, since it is not much more likely that a key identifier
collision will occur with 7 bytes rather than 8. This patch fixes the packet
to use the full number of bytes that were originally intended to be used for
the key identifier.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:27:57 +0000 (01:27 -0700)]
eCryptfs: fix Tag 11 parsing code
Fix up the Tag 11 parsing code to handle size limits and boundaries more
explicitly. Pay attention to *8* bytes for the key identifier (literal data),
no more, no less.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:27:55 +0000 (01:27 -0700)]
eCryptfs: kmem_cache objects for multiple keys; init/exit functions
Introduce kmem_cache objects for handling multiple keys per inode. Add calls
in the module init and exit code to call the key list
initialization/destruction functions.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 16 Oct 2007 08:27:53 +0000 (01:27 -0700)]
eCryptfs: add key list structure; search keyring
Add support structures for handling multiple keys. The list in crypt_stat
contains the key identifiers for all of the keys that should be used for
encrypting each file's File Encryption Key (FEK). For now, each inode
inherits this list from the mount-wide crypt_stat struct, via the
ecryptfs_copy_mount_wide_sigs_to_inode_sigs() function.
This patch also removes the global key tfm from the mount-wide crypt_stat
struct, instead keeping a list of tfm's meant for dealing with the various
inode FEK's. eCryptfs will now search the user's keyring for FEK's parsed
from the existing file metadata, so the user can make keys available at any
time before or after mounting.
Now that multiple FEK packets can be written to the file metadata, we need to
be more meticulous about size limits. The updates to the code for writing out
packets to the file metadata makes sizes and limits more explicit, uniformly
expressed, and (hopefully) easier to follow.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Tue, 16 Oct 2007 08:27:52 +0000 (01:27 -0700)]
fs/nfsd/export.c: make 3 functions static
This patch makes the following needlessly global functions static:
- exp_get_by_name()
- exp_parent()
- exp_find()
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Juhl [Tue, 16 Oct 2007 08:27:52 +0000 (01:27 -0700)]
isdn: guard against a potential NULL pointer dereference in old_capi_manufacturer()
In drivers/isdn/capi/kcapi.c::old_capi_manufacturer(), if the call to
get_capi_ctr_by_nr(ldef.contr); in line 823 returns NULL, then we'll be
dereferencing a NULL pointer in the very next line.
Jesper Juhl [Tue, 16 Oct 2007 08:27:51 +0000 (01:27 -0700)]
fix possible NULL deref on low memory condition in capidrv.c::send_message()
If we fail to allocate an skb in
drivers/isdn/capi/capidrv.c::send_message(), then we'll end up
dereferencing a NULL pointer.
Since out of memory conditions are not unheard of, I believe it
is better to print a error message and just return rather than
bring down the whole kernel.
Sure, doing this may upset some application, but that's still
better than crashing the whole system.
Masami Hiramatsu [Tue, 16 Oct 2007 08:27:49 +0000 (01:27 -0700)]
kprobes: support kretprobe blacklist
Introduce architecture dependent kretprobe blacklists to prohibit users
from inserting return probes on the function in which kprobes can be
inserted but kretprobes can not.
This patch also removes "__kprobes" mark from "__switch_to" on x86_64 and
registers "__switch_to" to the blacklist on x86-64, because that mark is to
prohibit user from inserting only kretprobe.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tony Jones [Tue, 16 Oct 2007 08:27:48 +0000 (01:27 -0700)]
spi doesn't need class_device
Make the SPI framework and drivers stop using class_device. Update docs
accordingly ... highlighting just which sysfs paths should be
"safe"/stable.
Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Tue, 16 Oct 2007 08:27:47 +0000 (01:27 -0700)]
Documentation/spi/spidev_test.c: constify some variables
Constify two char pointers and a struct in Documentation/spi/spidev_test.c.
Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Vorontsov [Tue, 16 Oct 2007 08:27:47 +0000 (01:27 -0700)]
spi_mpc83xx handles other processors with QUICC engine
Currently, all QE SPI controllers are almost the same comparing to
MPC83xx's, thus let's use that driver for them.
Tested to work on MPC85xx in loopback mode.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Tue, 16 Oct 2007 08:27:46 +0000 (01:27 -0700)]
SPI driver runtime footprint shrinkage
Shrink the runtime footprint of various SPI drivers:
- Move the probe() routine into the init section where practical,
using platform_driver_probe() to make that safe. This often saves
around 1KB. Using platform_driver_probe() can also be a correctness
fix, if the probe routine is already marked __init but the driver
struct keeps a dangling pointer to it after init section removal.
- Likewise move remove() routines into the exit sections.
These changes would be inappropriate iff the platform devices were
actually hotpluggable (e.g. they're found on optional addon cards,
or in an FPGA that's dynamically reprogrammed). In these cases,
that's not the situation; it's an SOC controller and the only device
is initialized before these drivers.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Jackson [Tue, 16 Oct 2007 08:27:43 +0000 (01:27 -0700)]
cpuset: remove sched domain hooks from cpusets
Remove the cpuset hooks that defined sched domains depending on the setting
of the 'cpu_exclusive' flag.
The cpu_exclusive flag can only be set on a child if it is set on the
parent.
This made that flag painfully unsuitable for use as a flag defining a
partitioning of a system.
It was entirely unobvious to a cpuset user what partitioning of sched
domains they would be causing when they set that one cpu_exclusive bit on
one cpuset, because it depended on what CPUs were in the remainder of that
cpusets siblings and child cpusets, after subtracting out other
cpu_exclusive cpusets.
Furthermore, there was no way on production systems to query the
result.
Using the cpu_exclusive flag for this was simply wrong from the get go.
Fortunately, it was sufficiently borked that so far as I know, almost no
successful use has been made of this. One real time group did use it to
affectively isolate CPUs from any load balancing efforts. They are willing
to adapt to alternative mechanisms for this, such as someway to manipulate
the list of isolated CPUs on a running system. They can do without this
present cpu_exclusive based mechanism while we develop an alternative.
There is a real risk, to the best of my understanding, of users
accidentally setting up a partitioned scheduler domains, inhibiting desired
load balancing across all their CPUs, due to the nonobvious (from the
cpuset perspective) side affects of the cpu_exclusive flag.
Furthermore, since there was no way on a running system to see what one was
doing with sched domains, this change will be invisible to any using code.
Unless they have real insight to the scheduler load balancing choices, they
will be unable to detect that this change has been made in the kernel's
behaviour.
Initial discussion on lkml of this patch has generated much comment. My
(probably controversial) take on that discussion is that it has reached a
rough concensus that the current cpuset cpu_exclusive mechanism for
defining sched domains is borked. There is no concensus on the
replacement. But since we can remove this mechanism, and since its
continued presence risks causing unwanted partitioning of the schedulers
load balancing, we should remove it while we can, as we proceed to work the
replacement scheduler domain mechanisms.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Tue, 16 Oct 2007 08:27:42 +0000 (01:27 -0700)]
I/OAT: Add DCA services
Add code to connect to the DCA driver and provide cpu tags for use by
drivers that would like to use Direct Cache Access hints.
[Adrian Bunk] Several Kconfig cleanup items
[Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when
built for uni-processor
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Tue, 16 Oct 2007 08:27:41 +0000 (01:27 -0700)]
DCA: Add Direct Cache Access driver
Direct Cache Access (DCA) is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses. This
patch adds a manager and interface for matching up client requests for DCA
services with devices that offer DCA services.
In order to use DCA, a module must do bus writes with the appropriate tag
bits set to trigger a cache read for a specific CPU. However, different
CPUs and chipsets can require different sets of tag bits, and the methods
for determining the correct bits may be simple hardcoding or may be a
hardware specific magic incantation. This interface is a way for DCA
clients to find the correct tag bits for the targeted CPU without needing
to know the specifics.
[Dave Miller] use DEFINE_SPINLOCK()
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Tue, 16 Oct 2007 08:27:40 +0000 (01:27 -0700)]
I/OAT: Add support for MSI and MSI-X
Add support for MSI and MSI-X interrupt handling, including the ability
to choose the desired interrupt method.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net>
[bunk@kernel.org: drivers/dma/ioat_dma.c: make 3 functions static] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Tue, 16 Oct 2007 08:27:39 +0000 (01:27 -0700)]
I/OAT: Split PCI startup from DMA handling code
Split the general PCI startup from the DMA handling code in order to
prepare for adding support for DCA services and future versions of the
ioatdma device.
[Rusty Russell] Removal of __unsafe() usage.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Tue, 16 Oct 2007 08:27:39 +0000 (01:27 -0700)]
I/OAT: code cleanup from checkpatch output
Take care of a bunch of little code nits in ioatdma files
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Tue, 16 Oct 2007 08:27:37 +0000 (01:27 -0700)]
I/OAT: Rename the source file
Rename the ioatdma.c file in preparation for splitting into multiple files,
which will allow for easier adding new functionality.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shannon Nelson [Tue, 16 Oct 2007 08:27:37 +0000 (01:27 -0700)]
I/OAT: New device ids
Add device ids for new revs of the Intel I/OAT DMA engine
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lepton Wu [Tue, 16 Oct 2007 08:27:35 +0000 (01:27 -0700)]
uml: definitively kill subprocesses on panic
In a stock 2.6.22.6 kernel, poweroff a user mode linux guest (2.6.22.6 running
in skas0 mode) will halt the host linux. I think the reason is the kernel
thread abort because of a bug. Then the sys_reboot in process of user mode
linux guest is not trapped by the user mode linux kernel and is executed by
host. I think it is better to make sure all of our children process to quit
when user mode linux kernel abort.
[ jdike - the kernel process needs to ignore SIGTERM, plus the waitpid/kill
loop is needed to make sure that all of our children are dead before the
kernel exits ]
Signed-off-by: Lepton Wu <ytht.net@gmail.com> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:34 +0000 (01:27 -0700)]
uml: arch/um/drivers formatting
Style fixes for the rest of the drivers. arch/um/drivers should be pretty
CodingStyle-compliant now.
Except for the ubd driver, which will have to be treated separately.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:33 +0000 (01:27 -0700)]
uml: fix stub address calculations
The calculation of CONFIG_STUB_CODE and CONFIG_STUB_DATA didn't take into
account anything but 3G/1G and 2G/2G, leaving the other vmsplits out in the
cold.
I'd rather not duplicate the four known host vmsplit cases for each of these
symbols. I'd also like to calculate them based on the highest userspace
address.
The Kconfig language seems not to allow calculation of hex constants, so I
moved this to as-layout.h. CONFIG_STUB_CODE, CONFIG_STUB_DATA, and
CONFIG_STUB_START are now gone. In their place are STUB_CODE, STUB_DATA, and
STUB_START in as-layout.h.
i386 and x86_64 seem to differ as to whether an unadorned constant is an int
or a long, so I cast them to unsigned long so they can be printed
consistently. However, they are also used in stub.S, where C types don't work
so well. So, there are ASM_ versions of these constants for use in stub.S. I
also ifdef-ed the non-asm-friendly portion of as-layout.h.
With this in place, most of the rest of this patch is changing CONFIG_STUB_*
to STUB_*, except in stub.S, where they are changed to ASM_STUB_*.
defconfig has the old symbols deleted.
I also print these addresses out in case there is any problem mapping them on
the host.
The two stub.S files had some trailing whitespace, so that is cleaned up here.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:32 +0000 (01:27 -0700)]
uml: correctly handle skb allocation failures
Handle memory allocation failures when reading packets.
We have to read something from the host, even if we can't allocate any
memory. If we don't, the host side of the device may fill up and stop
delivering interrupts because no new packets can be queued.
A single sk_buff is allocated whenever an MTU is seen which is larger
than any seen earlier. This is used to read packets if there is a
memory allocation failure.
The large MTU check is done from eth_configure, which is called when a
interface is added to the system.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:31 +0000 (01:27 -0700)]
uml: network driver MTU cleanups
A bunch of MTU-related cleanups in the network code.
First, there is the addition of the notion of a maximally-sized packet, which
is the MTU plus headers. This is used to size the skb that will receive a
packet. This allows ether_adjust_skb to go away, as it was used to resize the
skb after it was allocated.
Since the skb passed into the low-level read routine is no longer resized, and
possibly reallocated, there, they (and the write routines) don't need to get
an sk_buff **. They just need the sk_buff * now. The callers of
ether_adjust_skb still need to do the skb_put, so that's now inlined.
The MAX_PACKET definitions in most of the drivers are gone.
The set_mtu methods were all the same and did nothing, so they can be
removed.
The ethertap driver had a typo which doubled the size of the packet rather
than adding two bytes to it. It also wasn't defining its setup_size, causing
a zero-byte kmalloc and crash when the invalid pointer returned from kmalloc
was dereferenced.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:29 +0000 (01:27 -0700)]
uml: network formatting
Style and other non-functional changes in the UML networking code, including
include tidying
style violations
copyright updates
printks getting severities
userspace code calling libc directly rather than using the os_*
wrappers
There's also a exit path cleanup in the pcap driver.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:28 +0000 (01:27 -0700)]
uml: use *SEC_PER_*SEC constants
There are various uses of powers of 1000, plus the odd BILLION constant in the
time code. However, there are perfectly good definitions of *SEC_PER_*SEC in
linux/time.h which can be used instaed.
These are replaced directly in kernel code. Userspace code imports those
constants as UM_*SEC_PER_*SEC and uses these.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:27 +0000 (01:27 -0700)]
uml: eliminate SIGALRM
Now that ITIMER_REAL is no longer used, there is no need for any use of
SIGALRM whatsoever. This patch removes all mention of it.
In addition, real_alarm_handler took a signal argument which is now always
SIGVTALRM. So, that is gone.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:27 +0000 (01:27 -0700)]
uml: time build fix
Put back an implementation of timeval_to_ns in arch/um/os-Linux/time.c.
tglx pointed out in his review of tickless support that there was a
perfectly good implementation of it in linux/time.h. The problem is that
this is userspace code which can't pull in kernel headers and there doesn't
seem to be a libc version.
So, I'm copying the version from linux/time.h rather than resurrecting my
version. This causes some declaration changes as it now returns a signed
value rather than an unsigned value.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:26 +0000 (01:27 -0700)]
uml: eliminate interrupts in the idle loop
Now, the idle loop now longer needs SIGALRM firing - it can just sleep for the
requisite amount of time and fake a timer interrupt when it finishes.
Any use of ITIMER_REAL now goes away. disable_timer only turns off
ITIMER_VIRTUAL. switch_timers is no longer needed, so it, and all calls, goes
away.
disable_timer now returns the amount of time remaining on the timer.
default_idle uses this to tell idle_sleep how long to sleep. idle_sleep will
call alarm_handler if nanosleep returns 0, which is the case if it didn't
return early due to an interrupt. Otherwise, it just returns.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:25 +0000 (01:27 -0700)]
uml: tickless support
Enable tickless support.
CONFIG_TICK_ONESHOT and CONFIG_NO_HZ are enabled.
itimer_clockevent gets CLOCK_EVT_FEAT_ONESHOT and an implementation of
.set_next_event.
CONFIG_UML_REAL_TIME_CLOCK goes away because it only makes sense when there is
a clock ticking away all the time. timer_handler now just calls do_IRQ once
without trying to figure out how many ticks to emulate.
The idle loop now needs to turn ticking on and off.
Userspace ticks keep happening as usual. However, the userspace loop keep
track of when the next wakeup should happen and suppresses process ticks until
that happens.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:25 +0000 (01:27 -0700)]
uml: clocksource support
Add clocksource support.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:24 +0000 (01:27 -0700)]
uml: GENERIC_CLOCKEVENTS support
Enable CONFIG_GENERIC_CLOCKEVENTS.
timer_irq gets its name changed to timer_handler, and becomes the recipient of
timer signals.
The clock_event_device is set up to imitate the current ticking clock, i.e.
CLOCK_EVT_FEAT_ONESHOT is not enabled yet.
disable_timer now doesn't ignore SIGALRM and SIGVTALRM because that breaks
delay calibration.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:23 +0000 (01:27 -0700)]
uml: GENERIC_TIME support
Enable CONFIG_GENERIC_TIME.
As a side-effect of this, the UML implementations of do_gettimeofday and
do_settimeofday go away, as these are provided by generic code. set_time also
goes away since it was only used by do_settimeofday.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:23 +0000 (01:27 -0700)]
uml: separate timer initialization
Move timer signal initialization from init_irq_signals to a new function,
timer_init.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:22 +0000 (01:27 -0700)]
uml: simplify interval setting
set_interval took a timer type as an argument, but it always specified a
virtual timer. So, it is not needed, and it is gone, and set_interval is
simplified appropriately.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:22 +0000 (01:27 -0700)]
uml: fix timer switching
Fix up the switching between virtual and real timers. The idle loop sleeps,
so the timer at that point must be real time. At all other times, the timer
must be virtual. Even when userspace is running, and the kernel is asleep,
the virtual timer is correct because the process timer will be running and the
process timer will be firing.
The timer switch used to be in the context switch and timer handler code.
This is moved to the idle loop and the signal handler, making it much more
clear why it is happening.
switch_timers now returns the old timer type so that it may be restored. The
signal handler uses this in order to restore the previous timer type when it
returns.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:21 +0000 (01:27 -0700)]
uml: eliminate hz()
Eliminate hz() since its only purpose was to provide a kernel-space constant
to userspace code. This can be done instead by providing the constant
directly through kernel_constants.h.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:20 +0000 (01:27 -0700)]
uml: more idiomatic parameter parsing
Make mconsole parameter parsing slightly more idiomatic.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:20 +0000 (01:27 -0700)]
uml: remove unused file
arch/um/os-Linux/tt.c is no longer used.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:19 +0000 (01:27 -0700)]
uml: eliminate floating point state from register file
The floating point fields in the pt_regs register file aren't used, so they
are deleted.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:18 +0000 (01:27 -0700)]
uml: style fixes in FP code
Tidy the code affected by the floating point fixes.
A bunch of unused stuff is gone, including two sigcontext.c files,
which turned out to be entirely unneeded.
There are the usual fixes -
whitespace and style cleanups
copyright updates
emacs formatting comments gone
include cleanups
adding severities to printks
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:17 +0000 (01:27 -0700)]
uml: sysrq and mconsole fixes
Fix the passing of printk output back to the mconsole client. The existing
code was somewhat confused, accumulating output in a buffer, but writing it
out entirely whenever a new chunk was added. This is fixed.
The earlier include cleanups caused linux/sysrq.h to not be included - this is
fixed by adding the include back, under CONFIG_MAGIC_SYSRQ.
CONFIG_MAGIC_SYSRQ is also defaulted to on in defconfig.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:17 +0000 (01:27 -0700)]
uml: coredumping floating point fixes
Fix core dumping of floating point state. ELF_CORE_COPY_FPREGS gets a
definitions, and as a result, dump_fpu no longer needs to exist. Also,
elf_fpregset_t needed a real definition.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:16 +0000 (01:27 -0700)]
uml: ptrace floating point fixes
Handle floating point state better in ptrace. The code now correctly
distinguishes between PTRACE_[GS]ETFPREGS and PTRACE_[GS]ETFPXREGS. The FPX
requests get handed off to arch-specific code because that's not generic.
get_fpregs, set_fpregs, set_fpregs, and set_fpxregs needed real
implementations.
Something here exposed a missing include in asm/page.h, which needed
linux/types.h in order to get gfp_t, so that's fixed here.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:15 +0000 (01:27 -0700)]
uml: floating point signal delivery fixes
Handle floating point state in across signals correctly. UML/i386 needs to
know whether the host does PTRACE_[GS]ETFPXREGS, so an arch_init_registers
hook is added, which on x86_64 does nothing.
UML doesn't save and restore floating point registers on kernel entry and
exit, so they need to be copied between the host process and the sigcontext.
save_fpx_registers and restore_fpx_registers are added for this purpose.
save_fp_registers and restore_fp_registers already exist.
There was a bunch of floating point state conversion code in
arch/um/sys-i386/ptrace.c which isn't needed there, but is needed in signal.c,
so it is moved over.
The i386 code now distinguishes between fp and fpx state and handles them
correctly. The x86_64 code just needs to copy state as-is between the host
process and the stack. There are also some fixes there to pass the correct
address of the floating point state around.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:14 +0000 (01:27 -0700)]
uml: don't use glibc asm/user.h
Stop including asm/user.h from libc - it seems to be disappearing from
distros. It's replaced with sys/user.h which defines user_fpregs_struct and
user_fpxregs_struct instead of user_i387_struct and struct user_fxsr_struct on
i386.
As a bonus, on x86_64, I get to dump some stupid typedefs which were needed in
order to get asm/user.h to compile.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:13 +0000 (01:27 -0700)]
uml: fix hostfs style
Style fixes in hostfs.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:13 +0000 (01:27 -0700)]
uml: remove unneeded if from hostfs
Get rid of an empty if statement which might look like a bug to a
casual reader.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:12 +0000 (01:27 -0700)]
uml: clean up tlb flush path
Tidy the tlb flushing code.
With tt mode gone, there is no reason to have the capability to have
called directly from do_mmap, do_mprotect, and do_munmap, rather than
calling a function pointer that it is given.
There was a large amount of data that was passed from function to
function, being used at the lowest level, without being changed. This
stuff is now encapsulated in a structure which is initialized at the
top layer and passed down. This simplifies the code, reduces the
amount of code needed to pass the parameters around, and saves on
stack space.
A somewhat more subtle change is the meaning of the current operation
index. It used to start at -1, being pre-incremented when adding an
operation. It now starts at 0, being post-incremented, with
associated adjustments of +/- 1 on comparisons.
In addition, tlb.h contained a couple of declarations which had no
users outside of tlb.c, so they could be moved or deleted.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:11 +0000 (01:27 -0700)]
uml: userspace files should call libc directly
A number of files that were changed in the recent removal of tt mode
are userspace files which call the os_* wrappers instead of calling
libc directly. A few other files were affected by this, through
This patch makes these call glibc directly.
There are also style fixes in the affected areas.
os_print_error has no remaining callers, so it is deleted.
There is a interface change to os_set_exec_close, eliminating a
parameter which was always the same. The callers are fixed as well.
os_process_pc got its error path cleaned up.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:10 +0000 (01:27 -0700)]
uml: fix inlines
"extern inline" will have different semantics with gcc 4.3.
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:09 +0000 (01:27 -0700)]
uml: replace clone with fork
Convert the boot-time host ptrace testing from clone to fork. They were
essentially doing fork anyway. This cleans up the code a bit, and makes
valgrind a bit happier about grinding it.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:08 +0000 (01:27 -0700)]
uml: remove os_* usage from userspace files
This patch fixes some userspace files which were calling libc through the os_*
wrappers.
It turns out that there was only one user of os_new_tty_pgrp, so it can be
deleted.
There are also some style and whitespace fixes in here.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:08 +0000 (01:27 -0700)]
uml: free LDT state on process exit
The space allocated for a process LDT wasn't being freed when the process
exited.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:07 +0000 (01:27 -0700)]
uml: rename pt_regs general-purpose register file
Before the removal of tt mode, access to a register on the skas-mode side of a
pt_regs struct looked like pt_regs.regs.skas.regs.regs[FOO]. This was bad
enough, but it became pt_regs.regs.regs.regs[FOO] with the removal of the
union from the middle. To get rid of the run of three "regs", the last field
is renamed to "gp".
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:06 +0000 (01:27 -0700)]
uml: fold mmu_context_skas into mm_context
This patch folds mmu_context_skas into struct mm_context, changing all users
of these structures as needed.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:05 +0000 (01:27 -0700)]
uml: get rid of do_longjmp
do_longjmp used to be needed when UML didn't have its own implementation of
setjmp and longjmp. They came from libc, and couldn't be called directly from
kernel code, as the libc jmp_buf couldn't be imported there. do_longjmp was a
userspace function which served to provide longjmp access to kernel code.
This is gone, and a number of void * pointers can now be jmp_buf *.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:05 +0000 (01:27 -0700)]
uml: remove __u64 usage from physical memory subsystem
Eliminate some uses of __u64 in the physical memory support. It's hard to get
a definition of __u64 in both kernel and userspace code on x86_64, so this
changes them to unsigned long long.
There are also a copyright update and formatting comment removal from the
affected header.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 16 Oct 2007 08:27:00 +0000 (01:27 -0700)]
uml: style fixes pass 3
Formatting changes in the files which have been changed in the course
of folding foo_skas functions into their callers. These include:
copyright updates
header file trimming
style fixes
adding severity to printks
These changes should be entirely non-functional.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log