Use setup_irq() instead of request_irq() to set up system timer
in 68328 timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.
Use setup_irq() instead of request_irq() to set up system timer
in ColdFire PIT timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.
m68knommu: use setup_irq() in ColdFire simple timer
Use setup_irq() instead of request_irq() to set up system timer
in ColdFire simple timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.
Use setup_irq() instead of request_irq() to set up system timer
in 68360 timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Nail two more simple section mismatch errors
[IA64] fix section mismatch warnings
[IA64] rename partial_page
[IA64] Ensure that machvec is set up takes place before serial console
[IA64] vector-domain - fix vector_table
[IA64] vector-domain - handle assign_irq_vector(AUTO_ASSIGN)
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
kbuild: fix modpost warnings for xtensa
kbuild: be more foregiving on init section naming
kbuild: rearrange a few function in modpost
kbuild: use LDFLAGS_MODULE only for .ko links
kconfig: remove unused members from struct symbol
kconfig: attach help text to menus
kbuild: fix up printing of Linux C Library version in scripts/ver_linux
kbuild: do not do section mismatch checks on vmlinux in 2nd pass
Sam Ravnborg [Wed, 25 Jul 2007 20:24:52 +0000 (22:24 +0200)]
kbuild: fix modpost warnings for xtensa
The Xtensa architecture places literal pools in sections separate
from the instructions. The corresponsing text sections, therefore,
reference the .literal section, and we have to suppress those
warnings.
The naming convention defines the name for a literal
section as .SECTION.literal, unless .SECTION is .text. In that case
the name is only .literal. Using strncmp() instead of strcmp()
to compare the from-section with .SECTION.init.refok in pattern 0
should not cause any regressions for other architectures.
We also need to suppress warnings for two informational
sections (.xt.lit and .xt.prop) used by the Xtensa architecture.
Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tony Luck [Fri, 20 Jul 2007 21:39:24 +0000 (14:39 -0700)]
[IA64] fix section mismatch warnings
In 741f98fe298a73c9d47ed53703c1279a29718581 Sam added full
checking across the entire vmlinux image. This flushed out
a dozen new section mismatch warnings. Start the whack-a-mole
game again to stomp them out.
Sam Ravnborg [Wed, 25 Jul 2007 19:52:31 +0000 (21:52 +0200)]
kbuild: be more foregiving on init section naming
In the whitelist function of modpost now use the same
check to identify init_section as in other places of modpost.
This has the effect that we now recognize sections named
.init.text.19 as init sections and we no longer warn
when we see these.
At the same time make surrounding code readable by dropping
use of temporary flags.
Roland McGrath [Mon, 23 Jul 2007 08:12:08 +0000 (01:12 -0700)]
kbuild: use LDFLAGS_MODULE only for .ko links
Sam Ravnborg pointed out that Documentation/kbuild/makefiles.txt already
says this is what it's for. This patch makes the reality live up to the
documentation. This fixes the problem of LDFLAGS_BUILD_ID getting into too
many places.
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Fri, 20 Jul 2007 22:00:36 +0000 (00:00 +0200)]
kconfig: attach help text to menus
Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.
This patch does this and at the same time introduce a few API
funtions used to access the help text.
The relevant api functions are introduced in the various frontends.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
kbuild: fix up printing of Linux C Library version in scripts/ver_linux
I noticed, when running scripts/ver_linux on both a Gentoo system
and a Slackware system, that the line printing the C library
version looked a little odd. So I fixed it up to be in line with
all the rest.
Old output:
Linux C Library > libc.2.5
New output:
Linux C Library 2.5
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Fri, 20 Jul 2007 20:36:56 +0000 (22:36 +0200)]
kbuild: do not do section mismatch checks on vmlinux in 2nd pass
We already check and warn about section mismatches from vmlinux
(build as vmlinux.o) during first pass so skip the checks
during the 2nd pass where we process modules.
H. Peter Anvin [Thu, 19 Jul 2007 00:19:30 +0000 (17:19 -0700)]
[x86 setup] Make struct ist_info cross-architecture, and use in setup code
Make "struct ist_info" valid on both i386 and x86-64, and use the
structure by name in the setup code. Additionally, "Intel SpeedStep
IST" is redundant, refer to it as IST consistently.
Starting with kernel 2.6.23-rc1, the i386 APM driver fails
on several of my machines with the message:
apm: BIOS not found
This happens because of a bug in the i386 boot code rewrite
from assembler to C. The original assembly code had the
following code in its APM BIOS presence test (boot/setup.S):
andw $0x02, %cx # Is 32 bit supported?
je done_apm_bios # No 32-bit, no (good) APM BIOS
That is, the code bails out if bit 2 is zero.
In the new C version, this is coded as (boot/apm.c):
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
SELinux: null-terminate context string in selinux_xfrm_sec_ctx_alloc
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
ACPI: autoload modules - Create ACPI alias interface
ACPI: autoload modules - ACPICA modifications
ACPI: asus-laptop: Fix failure exits
ACPI: fix oops due to typo in new throttling code
ACPI: ignore _PSx method for hotplugable PCI devices
ACPI: Use ACPI methods to select PCI device suspend state
ACPI, PNP: hook ACPI D-state to PNP suspend/resume
ACPI: Add acpi_pm_device_sleep_state helper routine
ACPI: Implement the set_target() callback from pm_ops
[IA64] Ensure that machvec is set up takes place before serial console
Parse the machvec command line option outside of the early_param()
so that ia64_mv is set before any console intialisation that
may result from early_param parsing.
Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
Currently most of the m68knommu cpu/board setup files are handling
the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves.
Move all this into the common setup code.
It is useless to preserve THREAD_SR in `resume'. The real user's sr
is actually in the stack. We also don't need to disable interrupts :
we'll never be in an invalid state, the sp switch is atomic.
Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
m68knommu: remove legacy power managament from 68328 serial driver
Remove the legacy power management code from the 68328 serial driver.
It is not used, and there is no current kernel support for power
management on the 68328.
john stultz [Wed, 25 Jul 2007 01:38:34 +0000 (18:38 -0700)]
Cache xtime every call to update_wall_time
This avoids xtime lag seen with dynticks, because while 'xtime' itself
is still not updated often, we keep a 'xtime_cache' variable around that
contains the approximate real-time that _is_ updated each time we do a
'update_wall_time()', and is thus never off by more than one tick.
IOW, this restores the original semantics for 'xtime' users, as long as
you use the proper abstraction functions (ie 'current_kernel_time()' or
'get_seconds()' depending on whether you want a timespec or just the
seconds field).
[ Updated Patch. As penance for my sins I've also yanked another #ifdef
that was added to avoid the xtime lag w/ hrtimers. ]
Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
john stultz [Wed, 25 Jul 2007 00:47:43 +0000 (17:47 -0700)]
Cleanup non-arch xtime uses, use get_seconds() or current_kernel_time().
This avoids use of the kernel-internal "xtime" variable directly outside
of the actual time-related functions. Instead, use the helper functions
that we already have available to us.
This doesn't actually change any behaviour, but this will allow us to
fix the fact that "xtime" isn't updated very often with CONFIG_NO_HZ
(because much of the realtime information is maintained as separate
offsets to 'xtime'), which has caused interfaces that use xtime directly
to get a time that is out of sync with the real-time clock by up to a
third of a second or so.
Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avi Kivity [Wed, 25 Jul 2007 06:22:12 +0000 (09:22 +0300)]
KVM: Fix removal of nx capability from guest cpuid
Testing the wrong bit caused kvm not to disable nx on the guest when it is
disabled on the host (an mmu optimization relies on the nx bits being the
same in the guest and host).
This allows Windows to boot when nx is disabled on te host (e.g. when
host pae is disabled).
Avi Kivity [Mon, 23 Jul 2007 15:33:14 +0000 (18:33 +0300)]
Revert "KVM: Avoid useless memory write when possible"
This reverts commit a3c870bdce4d34332ebdba7eb9969592c4c6b243. While it
does save useless updates, it (probably) defeats the fork detector, causing
a massive performance loss.
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (26 commits)
netdev: i82596 Ethernet needs <asm/cacheflush.h>
forcedeth: mcp73 device addition
forcedeth: new device ids in pci_ids.h
atl1: make atl1_init_ring_ptrs static
eHEA: net_poll support
drivers/net/acenic.c: fix check-after-use
defxx: Use __maybe_unused rather than a local hack
Fix error checking in Vitesse IRQ config
ps3: reduce allocation size of rx skb buffers
atl1: use kernel provided ethernet length constants
atl1: fix typo in dma_req_block
atl1: change cmb write threshold
atl1: fix typo in DMA engine setup
atl1: change tpd_avail function name
ps3: fix rare issue that reenabling rx DMA fails
ps3: removed calling netif_poll_enable() in open()
ps3: use ethX as the name of irq
ps3: use net_device_stats of net_device structure
ps3: removed conditional ethtool support
ps3: removed defines no longer used
...
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[8021Q]: vlan_ioctl_handler: fix return value
[GENETLINK]: Correctly report errors while registering a multicast group
[GENETLINK]: Fix adjustment of number of multicast groups
[GENETLINK]: Fix race in genl_unregister_mc_groups()
[NETFILTER]: Clean up duplicate includes in net/netfilter/
[NETFILTER]: Clean up duplicate includes in net/bridge/
[NETFILTER]: Fix logging regression
[TCPv6] MD5SIG: Ensure to reset allocation count to avoid panic.
Thomas Graf [Tue, 24 Jul 2007 22:32:46 +0000 (15:32 -0700)]
[GENETLINK]: Fix race in genl_unregister_mc_groups()
family->mcast_groups is protected by genl_lock so it must
be held while accessing the list in genl_unregister_mc_groups().
Requires adding a non-locking variant of genl_unregister_mc_group().
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
[NETFILTER]: Clean up duplicate includes in net/netfilter/
This patch cleans up duplicate includes in
net/netfilter/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
[NETFILTER]: Clean up duplicate includes in net/bridge/
This patch cleans up duplicate includes in
net/bridge/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 24 Jul 2007 22:29:55 +0000 (15:29 -0700)]
[NETFILTER]: Fix logging regression
Loading one of the LOG target fails if a different target has already
registered itself as backend for the same family. This can affect the
ipt_LOG and ipt_ULOG modules when both are loaded.
Reported and tested by: <t.artem@mailcity.com>
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
[TCPv6] MD5SIG: Ensure to reset allocation count to avoid panic.
After clearing all passwords for IPv6 peers, we need to
set allocation count to zero as well as we free the storage.
Otherwise, we panic when a user trys to (re)add a password.
Discovered and fixed by MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jul 2007 22:17:33 +0000 (15:17 -0700)]
[SPARC64]: Mark most of initial bootup asm as .text.init.ref_ok
We can't mark the whole thing init because there are dependencies
in bootloaders that assume that _start, or whatever the image
entry value, is 2 instructions before the "HdrS" signature.
In fact, TILO assumes this entry is always at 0x4000, yikes!
Also, right after the bootloader info area there are OBP strings and
values that get used later in the boot process, and those are not all
provably .init yet.
Signed-off-by: David S. Miller <davem@davemloft.net>
ata_piix: fix suspend/resume for some TOSHIBA laptops
ACPI implementations in several TOSHIBA laptops are weird and burn cpu
cycles for tens of seconds while trying to suspend if the PCI device
for the ATA controller is disabled when the ACPI suspend is called.
This patch uses DMI to match those machines and bypass device disable
on those machines during suspend. As the device needs to be put into
enabled state on resume without affecting PCI enable count, matching
resume callback uses __pci_reenable_device().
This bug is reported in bugzilla bug 7780.
http://bugzilla.kernel.org/show_bug.cgi?id=7780
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Some odd ACPI implementations choke if certain controller is disabled
when ACPI suspend is invoked but we still need to make sure the PCI
device is enabled during resume. Simply using pci_enable_device()
unbalances device enable count. Export __pci_reenable_device().
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Sparc optimized memset (arch/sparc/lib/memset.S) does not fill last
byte of the memory area, if area size is less than 8 bytes and start
address is not word (4-bytes) aligned.
Here is code chunk where bug located:
/* %o0 - memory address, %o1 - size, %g3 - value */
8:
add %o0, 1, %o0
subcc %o1, 1, %o1
bne,a 8b
stb %g3, [%o0 - 1]
This code should write byte every loop iteration, but last time delay
instruction stb is not executed because branch instruction sets
"annul" bit.
netdev: i82596 Ethernet needs <asm/cacheflush.h> on m68k
drivers/net/82596.c: In function 'init_rx_bufs':
drivers/net/82596.c:552: error: implicit declaration of function 'cache_clear'
drivers/net/82596.c: In function 'i596_start_xmit':
drivers/net/82596.c:1104: error: implicit declaration of function 'cache_push'
The driver still compiles on ia32 (CONFIG_APRICOT=y)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Andy Fleming [Wed, 18 Jul 2007 06:06:28 +0000 (01:06 -0500)]
Fix error checking in Vitesse IRQ config
phy_read() returns a negative number if there's an error, but the
error-checking code in the Vitesse driver's config_intr function
triggers if phy_read() returns non-zero. Correct that.
Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jay Cliburn [Thu, 19 Jul 2007 23:45:12 +0000 (18:45 -0500)]
atl1: change cmb write threshold
Change the threshold number of descriptors used to trigger CMB writes.
The vendor reports that under certain conditions this will reduce the
number of unnecessary tx interrupts and improve rx performance.
This change is lifted directly from vendor version 1.2.40.2 of the L1
driver.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Fixed rare issue that 'lv1_net_start_rx_dma failed, status=-9" was shown
in dmesg. This meant restarting rx DMA had been rejected by the hypervisor.
This issue would caused if the guest os requested starting DMA when
the hypervisor thought the DMA was in progress.
The state machine for DMA status of the hypervisor would be updated
by processing interrupt in the hypervisor.
Thus we should wait for the interrupt delivery before restarting
DMA.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
- Emitted return value of NETDEV_TX_LOCKED when DMA map or kick
failure.
Now it would free the skb, update drop packet statistics
and return OK. Requested from Jeff Garzik.
- Enable tx queue if number of free descriptors are more than 2
- Fixed descriptor leak if dma map for second descriptor failed
- Stopped calling xmit handler from interrupt handler in order
to recheck tx queue. Instead, call appropriate helper functions.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
projects / linux-2.6 / log