ISAPNP: handle independent options following dependent ones

The ISAPNP spec recommends that independent options precede
dependent ones, but this is not actually required.  The current
ISAPNP code incorrectly puts such trailing independent options
at the end of the last dependent option list.

This patch fixes that bug by resetting the current option list
to the independent list when we see an "End Dependent Functions"
tag.  PNPBIOS and PNPACPI handle this the same way.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: remove extra 0x100 bit from option priority

When building resource options, ISAPNP and PNPBIOS set the priority
to something like "0x100 | PNP_RES_PRIORITY_ACCEPTABLE", but we
immediately mask off the 0x100 again in pnp_build_option(), so that
bit looks superfluous.

Thanks to Rene Herman <rene.herman@gmail.com> for pointing this out.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: support optional IRQ resources

This patch adds an IORESOURCE_IRQ_OPTIONAL flag for use when
assigning resources to a device.  If the flag is set and we are
unable to assign an IRQ to the device, we can leave the IRQ
disabled but allow the overall resource allocation to succeed.

Some devices request an IRQ, but can run without an IRQ
(possibly with degraded performance).  This flag lets us run
the device without the IRQ instead of just leaving the
device disabled.

This is a reimplementation of this previous change by Rene
Herman <rene.herman@gmail.com>:
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b73a223661ed137c5d3d2635f954382e94f5a43

I reimplemented this for two reasons:
    - to prepare for converting all resource options into a single linked
      list, as opposed to the per-resource-type lists we have now, and
    - to preserve the order and number of resource options.

In PNPBIOS and ACPI, we configure a device by giving firmware a
list of resource assignments.  It is important that this list
has exactly the same number of resources, in the same order,
as the "template" list we got from the firmware in the first
place.

The problem of a sound card MPU401 being left disabled for want of
an IRQ was reported by Uwe Bugla <uwe.bugla@gmx.de>.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: rename pnp_register_*_resource() local variables

No functional change; just rename "data" to something more
descriptive.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNPACPI: ignore _PRS interrupt numbers larger than PNP_IRQ_NR

ACPI Extended Interrupt Descriptors can encode 32-bit interrupt
numbers, so an interrupt number may exceed the size of the bitmap
we use to track possible IRQ settings.

To avoid corrupting memory, complain and ignore too-large interrupt
numbers.

There's similar code in pnpacpi_parse_irq_option(), but I didn't
change that because the small IRQ descriptor can only encode
IRQs 0-15, which do not exceed bitmap size.

In the future, we could handle IRQ numbers greater than PNP_IRQ_NR
by replacing the bitmap with a table or list.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: centralize resource option allocations

This patch moves all the option allocations (pnp_mem, pnp_port, etc)
into the pnp_register_{mem,port,irq,dma}_resource() functions.  This
will make it easier to rework the option data structures.

The non-trivial part of this patch is the IRQ handling.  The backends
have to allocate a local pnp_irq_mask_t bitmap, populate it, and pass
a pointer to pnp_register_irq_resource().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: remove redundant pnp_can_configure() check

pnp_assign_resources() is static and the only caller checks
pnp_can_configure() before calling it, so no need to do it
again.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: make resource assignment functions return 0 (success) or -EBUSY (failure)

This patch doesn't change any behavior; it just makes the return
values more conventional.

This changes pnp_assign_dma() from a void function to one that
returns an int, just like the other assignment functions.  For
now, at least, pnp_assign_dma() always returns 0 (success), so
it appears to never fail, just like before.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: in debug resource dump, make empty list obvious

If the resource list is empty, say that explicitly.  Previously,
it was confusing because often the heading was followed by zero
resource lines, then some "add resource" lines from auto-assignment,
so the "add" lines looked like current resources.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: improve resource assignment debug

When we fail to assign an I/O or MEM resource, include the min/max
in the debug output to help match it with the options.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: increase I/O port & memory option address sizes

ACPI Address Space Descriptors can be up to 64 bits wide.
We should keep track of the whole thing when parsing resource
options, so this patch changes PNP port and mem option
fields from "unsigned short" and "unsigned int" to
"resource_size_t".

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: introduce pnp_irq_mask_t typedef

This adds a typedef for the IRQ bitmap, which should cause
no functional change, but will make it easier to pass a
pointer to a bitmap to pnp_register_irq_resource().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: make resource option structures private to PNP subsystem

Nothing outside the PNP subsystem should need access to a
device's resource options, so this patch moves the option
structure declarations to a private header file.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: define PNP-specific IORESOURCE_IO_* flags alongside IRQ, DMA, MEM

PNP previously defined PNP_PORT_FLAG_16BITADDR and PNP_PORT_FLAG_FIXED
in a private header file, but put those flags in struct resource.flags
fields.  Better to make them IORESOURCE_IO_* flags like the existing
IRQ, DMA, and MEM flags.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: whitespace/coding style fixes

No functional change; just make a couple declarations
consistent with the rest of the file.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: add pnp_possible_config() -- can a device could be configured this way?

As part of a heuristic to identify modem devices, 8250_pnp.c
checks to see whether a device can be configured at any of the
legacy COM port addresses.

This patch moves the code that traverses the PNP "possible resource
options" from 8250_pnp.c to the PNP subsystem.  This encapsulation
is important because a future patch will change the implementation
of those resource options.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

PNP: dont sort by type in /sys/.../resources

Rather than stepping through all IO resources, then stepping through
all MMIO resources, etc., we can just iterate over the resource list
once directly.

This can change the order in /sys, e.g.,

    # cat /sys/devices/pnp0/00:07/resources     # OLD
    state = active
    io 0x3f8-0x3ff
    irq 4

    # cat /sys/devices/pnp0/00:07/resources     # NEW
    state = active
    irq 4
    io 0x3f8-0x3ff

The old code artificially sorted resources by type; the new code
just lists them in the order we read them from the ISAPNP hardware
or the BIOS.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNP: remove ratelimit on add resource failures

We used to have a fixed-size resource table.  If a device had
twenty resources when the table only had space for ten, we didn't
need ten warnings, so we added the ratelimit.

Now that we can dynamically allocate new resources, we should
only get failures if the allocation fails.  That should be
rare enough that we don't need to ratelimit the messages.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNPACPI: keep disabled resources when parsing current config

When we parse a device's _CRS data (the current resource settings),
we should keep track of everything we find, even if it's currently
disabled or invalid.

This is what we already do for ISAPNP and PNPBIOS, and it helps
keep things matched up when we subsequently re-encode resources.
For example, consider a device with (mem, irq0, irq1, io), where
irq0 is disabled.  If we drop irq0 when parsing the _CRS, we will
mistakenly put irq1 in the irq0 slot when we encode resources
for an _SRS call.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNP: replace pnp_resource_table with dynamically allocated resources

PNP used to have a fixed-size pnp_resource_table for tracking the
resources used by a device.  This table often overflowed, so we've
had to increase the table size, which wastes memory because most
devices have very few resources.

This patch replaces the table with a linked list of resources where
the entries are allocated on demand.

This removes messages like these:

    pnpacpi: exceeded the max number of IO resources
    00:01: too many I/O port resources

References:

    http://bugzilla.kernel.org/show_bug.cgi?id=9535
    http://bugzilla.kernel.org/show_bug.cgi?id=9740
    http://lkml.org/lkml/2007/11/30/110

This patch also changes the way PNP uses the IORESOURCE_UNSET,
IORESOURCE_AUTO, and IORESOURCE_DISABLED flags.

Prior to this patch, the pnp_resource_table entries used the flags
like this:

    IORESOURCE_UNSET
This table entry is unused and available for use.  When this flag
is set, we shouldn't look at anything else in the resource structure.
This flag is set when a resource table entry is initialized.

    IORESOURCE_AUTO
This resource was assigned automatically by pnp_assign_{io,mem,etc}().

This flag is set when a resource table entry is initialized and
cleared whenever we discover a resource setting by reading an ISAPNP
config register, parsing a PNPBIOS resource data stream, parsing an
ACPI _CRS list, or interpreting a sysfs "set" command.

Resources marked IORESOURCE_AUTO are reinitialized and marked as
IORESOURCE_UNSET by pnp_clean_resource_table() in these cases:

    - before we attempt to assign resources automatically,
    - if we fail to assign resources automatically,
    - after disabling a device

    IORESOURCE_DISABLED
Set by pnp_assign_{io,mem,etc}() when automatic assignment fails.
Also set by PNPBIOS and PNPACPI for:

    - invalid IRQs or GSI registration failures
    - invalid DMA channels
    - I/O ports above 0x10000
    - mem ranges with negative length

After this patch, there is no pnp_resource_table, and the resource list
entries use the flags like this:

    IORESOURCE_UNSET
This flag is no longer used in PNP.  Instead of keeping
IORESOURCE_UNSET entries in the resource list, we remove
entries from the list and free them.

    IORESOURCE_AUTO
No change in meaning: it still means the resource was assigned
automatically by pnp_assign_{port,mem,etc}(), but these functions
now set the bit explicitly.

We still "clean" a device's resource list in the same places,
but rather than reinitializing IORESOURCE_AUTO entries, we
just remove them from the list.

Note that IORESOURCE_AUTO entries are always at the end of the
list, so removing them doesn't reorder other list entries.
This is because non-IORESOURCE_AUTO entries are added by the
ISAPNP, PNPBIOS, or PNPACPI "get resources" methods and by the
sysfs "set" command.  In each of these cases, we completely free
the resource list first.

    IORESOURCE_DISABLED
In addition to the cases where we used to set this flag, ISAPNP now
adds an IORESOURCE_DISABLED resource when it reads a configuration
register with a "disabled" value.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNP: make pnp_{port,mem,etc}_start(), et al work for invalid resources

Some callers use pnp_port_start() and similar functions without
making sure the resource is valid.  This patch makes us fall
back to returning the initial values if the resource is not
valid or not even present.

This mostly preserves the previous behavior, where we would just
return the initial values set by pnp_init_resource_table().  The
original 2.6.25 code didn't range-check the "bar", so it would
return garbage if the bar exceeded the table size.  This code
returns sensible values instead.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNP: add pnp_resource_type_name() helper function

This patch adds a "pnp_resource_type_name(struct resource *)" that
returns the string resource type.  This will be used by the sysfs
"show resources" function and the debug resource dump function.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNP: add pnp_resource_type() internal interface

Given a struct resource, this returns the type (IO, MEM, IRQ, DMA).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNP: remove pnp_resource.index

We used pnp_resource.index to keep track of which ISAPNP configuration
register a resource should be written to.  We needed this only to
handle the case where a register is disabled but a subsequent register
in the same set is enabled.

Rather than explicitly maintaining the pnp_resource.index, this patch
adds a resource every time we read an ISAPNP configuration register
and marks the resource as IORESOURCE_DISABLED when appropriate.  This
makes the position in the pnp_resource_table always correspond to the
config register index.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

PNP: add detail to debug resource dump

In the debug resource dump, decode the flags and indicate when
a resource is disabled or has been automatically assigned.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: video: fix brightness allocation

Fix use of uninitialized device->brightness.

Signed-off-by: Julia Jomantaite <julia.jomantaite@gmail.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: Andi Kleen maintains the ACPI sub-system

...while Len is on sabbatical from Intel

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: Zhang Rui maintains ACPI THERMAL and FAN

Reflect that Zhang-Rui has been the sub-maintainer for
ACPI THERMAL and FAN for some time now.

Also, the Chinese custom is to speak family name first,
so rather than "Rui Zhang", write "Zhang Rui",
as he does on e-mail.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: Disable MWAIT via DMI on broken Compal board

If a system matches in this DMI table,
Linux will disable MWAIT support for idle.
ie. "idle=nomwait" is automatically invoked
and C1_FFH and C2C3_FFH access mode are disabled.

http://bugzilla.kernel.org/show_bug.cgi?id=10807
http://bugzilla.kernel.org/show_bug.cgi?id=10914

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI : Create "idle=nomwait" bootparam

"idle=nomwait" disables the use of the MWAIT
instruction from both C1 (C1_FFH) and deeper (C2C3_FFH)
C-states.

When MWAIT is unavailable, the BIOS and OS generally
negotiate to use the HALT instruction for C1,
and use IO accesses for deeper C-states.

This option is useful for power and performance
comparisons, and also to work around BIOS bugs
where broken MWAIT support is advertised.

http://bugzilla.kernel.org/show_bug.cgi?id=10807
http://bugzilla.kernel.org/show_bug.cgi?id=10914

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: Create "idle=halt" bootparam

"idle=halt" limits the idle loop to using
the halt instruction.  No MWAIT, no IO accesses,
no C-states deeper than C1.

If something is broken in the idle code,
"idle=halt" is a less severe workaround
than "idle=poll" which disables all power savings.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: Disable the C2C3_FFH access mode HW has no MWAIT support

991528d7348667924176f3e29addea0675298944
(ACPI: Processor native C-states using MWAIT)
started passing C2C3_FFH to _PDC to tell the BIOS
that Linux supports MWAIT for deep C-states.

However, we should first double check with the hardware
that it actually supports MWAIT before potentially exposing
a BIOS bug of an MWAIT _CST on HW that doesn't support MWAIT.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: Enhance /sys/firmware/interrupts to allow enable/disable/clear from user-space

Allow users to enable/disable/clear a specific & valid GPE/Fixed Event
in user space.

This is useful for debugging, especially for some
interrupt storm issues.

All wakeup GPEs are disabled and they can not be enabled at runtime,
and we mark them as invalid.

All GPEs that don't have a _Lxx/_Exx method are marked as invalid.

All Fixed Events that don't have an event handler are marked as invalid
and they can't be enabled until an event handler is registered.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ling Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Update version to 20080609

Update version to 20080609.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Fix mutex debug code for wrong loop termination value

Loop was terminating one iteration early, missing one of the
debugger handshake mutexes. Linn Crosetto.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Cleanup of _PRT parsing code

Removed extraneous else clauses, other general cleanup.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Cleanup debug operand dump mechanism

Eliminated unnecessary operands; eliminated use of negative index
in loop.  Operands now displayed in correct order, not backwards.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Fix for invalid large array index on 64-bit systems

This problem was introduced in 20080514 as a result of the
elimination of the acpi_native_uint type. Code uses a negative
array index, which should be eliminated.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Update disassembler for DMAR table changes

Now supports the 2007 intel Virtualization Technology for Directed
I/O specification.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Update DMAR and SRAT table definitions

Synchronized tables with current specifications.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Workaround for reversed _PRT entries from BIOS

Some BIOSs erroneously reverse the _PRT SourceName and the
SourceIndex.  Detect and repair this problem. MS ACPI also allows
and repairs this problem, thus ACPICA must also.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Update version to 20080514

Update version to 20080514

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Add const qualifier for appropriate string constants

Mostly MODULE_NAME and printf format strings.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Several lint changes, no functional changes

Remove pointer cast warnings and fix for a debug printf.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Removed unused include files from source files

From lint.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Eliminate acpi_native_uint type v2

No longer needed; replaced mostly with u32, but also acpi_size
where a type that changes 32/64 bit on 32/64-bit platforms is
required.

v2: Fix a cast of a 32-bit int to a pointer in ACPI to avoid a compiler warning.
from David Howells

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Fix possible negative array index in acpi_ut_validate_exception

Added NULL fields to the exception string arrays to eliminate
the -1 subtraction on the SubStatus field.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Update tracking macros to reduce code/data size

Changed ACPI_MODULE_NAME and ACPI_FUNCTION_NAME to use arrays of
strings instead of pointers to static strings. Jan Beulich and
Bob Moore.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Fix for hang on GPE method invocation

Fixes problem where the new method argument count validation mechanism
will enter an infinite loop when a GPE method is dispatched.
Problem fixed be removing the obsolete code that passes GPE block
information to the notify handler via the control method parameter pointer.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: Add argument count checking to control method invocation via acpi_evaluate_object

Error if too few arguments, warning if too many. This applies
only to external programmatic control method execution, not
method-to-method calls within the AML.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

fujitsu-laptop: depends on INPUT

fujitsu-laptop uses input_* functions, so it should depend on INPUT.

drivers/built-in.o: In function `acpi_fujitsu_add':
fujitsu-laptop.c:(.text+0xaaec7): undefined reference to `input_allocate_device'
fujitsu-laptop.c:(.text+0xaaf39): undefined reference to `input_register_device'
fujitsu-laptop.c:(.text+0xab025): undefined reference to `input_free_device'
drivers/built-in.o: In function `acpi_fujitsu_notify':
fujitsu-laptop.c:(.text+0xab0d8): undefined reference to `input_event'
fujitsu-laptop.c:(.text+0xab0e5): undefined reference to `input_event'
fujitsu-laptop.c:(.text+0xab0f5): undefined reference to `input_event'
fujitsu-laptop.c:(.text+0xab102): undefined reference to `input_event'
drivers/built-in.o: In function `acpi_fujitsu_hotkey_notify':
fujitsu-laptop.c:(.text+0xab261): undefined reference to `input_event'
drivers/built-in.o:fujitsu-laptop.c:(.text+0xab26e): more undefined references to `input_event' follow
drivers/built-in.o: In function `acpi_fujitsu_hotkey_add':
fujitsu-laptop.c:(.text+0xab49c): undefined reference to `input_allocate_device'
fujitsu-laptop.c:(.text+0xab51a): undefined reference to `input_register_device'
fujitsu-laptop.c:(.text+0xab5e4): undefined reference to `input_free_device'
make[1]: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

snapshot: Use pm_mutex for mutual exclusion

We can avoid taking the BKL in snapshot_ioctl() if pm_mutex is used to prevent
the ioctls from being executed concurrently.

In addition, although it is only possible to open /dev/snapshot once, the task
which has done that may spawn a child that will inherit the open descriptor,
so in theory they can call snapshot_write(), snapshot_read() and
snapshot_release() concurrently.  pm_mutex can also be used for mutual
exclusion in such cases.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>

snapshot: Push BKL down into ioctl handlers

Push BKL down into ioctl handlers - snapshot device.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Freezer: Introduce PF_FREEZER_NOSIG

The freezer currently attempts to distinguish kernel threads from
user space tasks by checking if their mm pointer is unset and it
does not send fake signals to kernel threads.  However, there are
kernel threads, mostly related to networking, that behave like
user space tasks and may want to be sent a fake signal to be frozen.

Introduce the new process flag PF_FREEZER_NOSIG that will be set
by default for all kernel threads and make the freezer only send
fake signals to the tasks having PF_FREEZER_NOSIG unset.  Provide
the set_freezable_with_signal() function to be called by the kernel
threads that want to be sent a fake signal for freezing.

This patch should not change the freezer's observable behavior.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>

APM emulation: Notify about all suspend events, not just APM invoked ones (v2)

This revamps the apm-emulation code to get suspend notifications
regardless of what way pm_suspend() was invoked, whether via the
apm ioctl or via /sys/power/state. Also do some code cleanup and
add comments while at it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI PM: Remove obsolete Toshiba workaround

Remove the obsolete workaround for a Toshiba Satellite 4030cdt
S1 problem from drivers/acpi/sleep/main.c .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>

PCI ACPI: Drop the second argument of platform_pci_choose_state

Since the second argument of acpi_pci_choose_state() and
platform_pci_choose_state() is never used, remove it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI PM: acpi_pm_device_sleep_state() cleanup

Get rid of a superfluous acpi_pm_device_sleep_state() parameter.  The
only legitimate value of that parameter must be derived from the first
parameter, which is what all the callers already do.  (However, this
does not address the fact that ACPI still doesn't set up those flags.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>

dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: don't walk tables if ACPI was disabled

Ingo Molnar wrote:
> -tip auto-testing started triggering this spinlock corruption message
> yesterday:
>
> [    3.976213] calling  acpi_rtc_init+0x0/0xd3
> [    3.980213] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C50000 could not acquire Mutex [3] [20080321]
> [    3.992213] BUG: spinlock bad magic on CPU#0, swapper/1
> [    3.992213]  lock: c2508dc4, .magic: 00000000, .owner: swapper/1, .owner_cpu: 0

This is apparently because some parts of ACPI, including mutexes, are not
initialized when acpi=off is passed to the kernel.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acer-wmi: Remove version number

It doesn't make much sense these days.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acer-wmi: Add debugfs file for device detection

Add a debugfs file for showing the full results of the method we use to
detect devices on WMID laptops.

This should be useful in the case that a Linux user gets an Acer laptop
with 3G support (and/ or people who enjoy ripping their wireless cards out)
so we can get some feedback on how this value changes in these cases.

(At the moment, we always enable the wireless and 3G control. In the case
of the former, this is fairly safe. In the case of the latter though,
trying to toggle this device if it doesn't exist on a laptop causes ACPI
warnings/ errors).

To summarise: If you have an Acer laptop with a built in 3G card, please
report back the value from this file.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acer-wmi: Disable device autodetection on Fujitsu Siemens Amilo Li2732

The AMW0 (V1) device detection method doesn't work properly on this laptop,
so disable it, and for other laptops that may have this problem, by
switching on a strange GUID.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acer-wmi: Add EC quirk for Fujitsu Siemens Amilo Li 1718

This laptop needs a different EC quirk from the standard Acer one to read
the wireless status.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acer-wmi: Respect framebuffer blanking in backlight

If the framebuffer has requested blanking, turn the backlight down. Also
offer the user the option to do this.

Reported-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acer-wmi: Blacklist backlight on Acer Aspire 1520 & 1360 series

A newer BIOS for these laptops adds ACPI-WMI support to them. However, it does
not add support for the backlight via the EC, and we have no way to detect
this on older machines, so blacklist it from them.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acer-wmi: Remove LED colour comment from documentation

This should have been removed when the colour was removed from the LED
device name.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

eeepc-laptop: static

make the needlessly global cm_{g,s}etv[] static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPICA: fix mutex names in debug code.

Reorder the mutex names to match the preceding #defines

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Make GPE disable more robust

Implemented another change for the GPE disable. We now perform a
read-change-write of the enable register instead of simply writing out the
cached enable mask. This will prevent inadvertent enabling of GPEs if a rogue
GPE is received during initialization (before GPE handlers are installed.)

http://bugzilla.kernel.org/show_bug.cgi?id=6217

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

compal-laptop: remove unnecessary lcd_level attribute

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

acpi: fix printk format warning

Fix printk format warning:

linux-next-20080617/drivers/acpi/processor_throttling.c:1258: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: fix processor throttling set error

http://bugzilla.kernel.org/show_bug.cgi?id=9704

When echo some invalid values to /proc/acpi/processor/*/throttling,
there isn't any error info returned, on the contray, it sets
throttling value to some T* successfully, obviously, this is incorrect,
a correct way should be to let it fail and return error info.

This patch fixed the aforementioned issue, it also enables
/proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0',
it also strictly limits /proc/acpi/processor/*/throttling only to accept
 "*", "t*" and "T*", "*" is the throttling state value the processor can
support, current, it is 0 - 7.

Before applying this patch, the test result is below:

[root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T1
state available: T0 to T7
states:
    T0:                  100%
   *T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling
[root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T1
state available: T0 to T7
states:
    T0:                  100%
   *T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling
[root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost acpi]# cd /
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T2
state available: T0 to T7
states:
    T0:                  100%
    T1:                  87%
   *T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling
[root@localhost /]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T7
state available: T0 to T7
states:
    T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
   *T7:                  12%
[root@localhost /]#

After applying this patch, the test result is below:

[root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T0
state available: T0 to T7
states:
   *T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
    T7:                  12%
[root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T7
state available: T0 to T7
states:
    T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
   *T7:                  12%
[root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c
[root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# echo $?
0
[root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T7
state available: T0 to T7
states:
    T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
   *T7:                  12%
[root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling
state count:             8
active state:            T7
state available: T0 to T7
states:
    T0:                  100%
    T1:                  87%
    T2:                  75%
    T3:                  62%
    T4:                  50%
    T5:                  37%
    T6:                  25%
   *T7:                  12%
[root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling
[root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling
-bash: echo: write error: Invalid argument
[root@localhost linux-2.6.24-rc6]#

Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: fix acpi fan state set error

Under /proc/acpi, there is a fan control interface, a user can
set 0 or 3 to /proc/acpi/fan/*/state, 0 denotes D0 state, 3
denotes D3 state, but in current implementation, a user can
set a fan to D1 state by any char excluding '1', '2' and '3'.

For example:

[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on

Obviously, such inputs as "" and "xxxxx" are invalid for fan state.

This patch fixes this issue, it strictly limits fan state only to
accept 0, 1, 2 and 3, any other inputs are invalid.

Before applying this patch, the test result is:

[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "3x" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "-1x" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]#

After applying this patch, the test result is:

[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "" > /proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "xxxxx" > /proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "-1x" > /proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost ~]# echo "4" > //proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost ~]# echo "3" > //proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost ~]# echo "3x" > //proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]#

Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: fix checkpatch.pl complaints in scan.c

http://bugzilla.kernel.org/show_bug.cgi?id=9772

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Fujitsu-laptop update

Add additional capabilities to the Fujitsu-laptop driver.

 * Brightness hotkey actions are sent to userspace. This can be disabled
   using a module parameter if it causes issues with models which handle
   these keys transparently in the BIOS.

 * Actions of additional hotkeys found on some Fujitsu models (eg: the
   suspend key and the dedicated "power on passphrase" keys) are broadcast
   to userspace.

 * An alternative brightness control method used by some Fujitsu models
   (for example, the S6410) is now supported, enabling software brightness
   controls on models using this method.

 * DMI-based module aliases are configured for the S6410 and S7020.

 * The current LCD brightness after booting should now be reflected in the
   standard backlight interface sysfs file (previously it was always set to
   0).  The platform brightness sysfs interface has always been fine.

Thanks go to Peter Gruber who provided a significant portion of this code
and tested various iterations of the patch on his S6410.

Signed-off-by: Peter Gruber <nokos@gmx.net>
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

ACPI: change processors from array to per_cpu variable

Change processors from an array sized by NR_CPUS to a per_cpu variable.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

misc,acpi,backlight: compal Laptop Extras

This is driver for Compal Laptop: FL90/IFL90, based on MSI driver.

This driver exports a few files in /sys/devices/platform/compal-laptop/:
 lcd_level - screen brightness: contains a single integer in the range 0..7 (rw)
 wlan - wlan subsystem state: contains 0 or 1 (rw)
 bluetooth - bluetooth subsystem state: contains 0 or 1 (rw)
 raw - raw value taken from embedded controller register (ro)

In addition to these platform device attributes the driver registers itself
in the Linux backlight control subsystem and is available to userspace under
/sys/class/backlight/compal-laptop/.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Len Brown <lenb@kernel.org>
Cc: Alexey Starikovskiy <aystarik@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

create sysfs link from acpi device to sysdev for cpu

Sys I/F under acpi device node and sysdev device node are both
needed for cpu hot-removal. User space need this link so that
they know they are poking the sys I/F for the same cpu.
http://bugzilla.kernel.org/show_bug.cgi?id=9772

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

force offline the processor during hot-removal

The ACPI device node for the cpu has already been unregistered
when acpi_processor_handle_eject is called.
Thus we should offline the cpu and continue, rather than a failure here.
http://bugzilla.kernel.org/show_bug.cgi?id=9772

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

fix a deadlock issue when poking "eject" file

"/sys/devices/LNXSYSTM:00/.../eject" is used to evaluate _EJx method
and eject a device in user space.
But system hangs when poking the "eject" file because that
the device hot-removal code invoke the driver .remove method which will
try to remove the "eject" file as a result.

Queues the hot-removal function for deferred execution in this patch.
http://bugzilla.kernel.org/show_bug.cgi?id=9772

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (44 commits)
  hwmon: (w83l786ng) Convert to a new-style i2c driver
  hwmon: (w83l785ts) Convert to a new-style i2c driver
  hwmon: (w83793) Convert to a new-style i2c driver
  hwmon: (w83792d) Convert to a new-style i2c driver
  hwmon: (w83791d) Convert to a new-style i2c driver
  hwmon: (thmc50) Convert to a new-style i2c driver
  hwmon: (smsc47m192) Convert to a new-style i2c driver
  hwmon: (max6650) Convert to a new-style i2c driver
  hwmon: (max1619) Convert to a new-style i2c driver
  hwmon: (lm93) Convert to a new-style i2c driver
  hwmon: (lm92) Convert to a new-style i2c driver
  hwmon: (lm90) Convert to a new-style i2c driver
  hwmon: (lm87) Convert to a new-style i2c driver
  hwmon: (lm83) Convert to a new-style i2c driver
  hwmon: (lm80) Convert to a new-style i2c driver
  hwmon: (lm77) Convert to a new-style i2c driver
  hwmon: (lm63) Convert to a new-style i2c driver
  hwmon: (gl520sm) Convert to a new-style i2c driver
  hwmon: (gl518sm) Convert to a new-style i2c driver
  hwmon: (fscpos) Convert to a new-style i2c driver
  ...

Fix compile issues in fs/compat_ioctl.c when CONFIG_BLOCK is disabled

Fix fs/compat_ioctl.c to handle CONFIG_BLOCK=n, CONFIG_SCSI=n to avoid
build errors:

In file included from include/scsi/scsi.h:12,
                 from fs/compat_ioctl.c:71:
include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined
include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
In file included from include/scsi/scsi.h:12,
                 from fs/compat_ioctl.c:71:
include/scsi/scsi_cmnd.h: In function 'scsi_bidi_cmnd':
include/scsi/scsi_cmnd.h:182: error: implicit declaration of function 'blk_bidi_rq'
include/scsi/scsi_cmnd.h:183: error: dereferencing pointer to incomplete type
include/scsi/scsi_cmnd.h: In function 'scsi_in':
include/scsi/scsi_cmnd.h:189: error: dereferencing pointer to incomplete type

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/ep8248e: Fix compile problem if !CONFIG_FS_ENET

If we don't enable FS_ENET we get build issues:

arch/powerpc/platforms/built-in.o: In function `ep8248e_mdio_probe':
arch/powerpc/platforms/82xx/ep8248e.c:129: undefined reference to `alloc_mdio_bitbang'
arch/powerpc/platforms/82xx/ep8248e.c:143: undefined reference to `mdiobus_register'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix MIPS cross-compile problem

Crosscompiling on a Fedora 9 machine running gcc 4.3.0 as its host compiler
and gcc 3.4.6 for the mips-linux target results in the following build
error:

$ make malta_defconfig
$ make
cc1: error: unrecognized command line option "-fno-stack-protector"
scripts/kconfig/conf -s arch/mips/Kconfig
cc1: error: unrecognized command line option "-fno-stack-protector"

The arch Makefile is included too late so the host compiler is feature
tested, not the crosscompiler as intended and thus the Makefile applies
adds -fno-stack-protector to crosscompiler's flags which fails for gcc
3.4.6.  The bug was introduced by e06b8b98da071f7dd78fb7822991694288047df0
in 2.6.25; 35bb5b1e0e84cfa1a8906f7e6a77f391ff315791 did add more flags
testing before the arch Makefile inclusion.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: (w83l786ng) Convert to a new-style i2c driver

The new-style w83l786ng driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kevin Lo <kevlo@kevlo.org>

hwmon: (w83l785ts) Convert to a new-style i2c driver

The new-style w83l785ts driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (w83793) Convert to a new-style i2c driver

The new-style w83793 driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (w83792d) Convert to a new-style i2c driver

The new-style w83792d driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (w83791d) Convert to a new-style i2c driver

The new-style w83791d driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>

hwmon: (thmc50) Convert to a new-style i2c driver

The new-style thmc50 driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>

hwmon: (smsc47m192) Convert to a new-style i2c driver

The new-style smsc47m192 driver implements the optional detect()
callback to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hartmut Rick <linux@rick.claranet.de>

hwmon: (max6650) Convert to a new-style i2c driver

The new-style max6650 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans J. Koch <hjk@linutronix.de>

hwmon: (max1619) Convert to a new-style i2c driver

The new-style max1619 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alexey Fisher <fishor@mail.ru>

hwmon: (lm93) Convert to a new-style i2c driver

The new-style lm93 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Eric J. Bowersox <ericb@aspsys.com>
Cc: Carsten Emde <cbe@osadl.org>
Cc: Hans J. Koch <hjk@linutronix.de>

hwmon: (lm92) Convert to a new-style i2c driver

The new-style lm92 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (lm90) Convert to a new-style i2c driver

The new-style lm90 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (lm87) Convert to a new-style i2c driver

The new-style lm87 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>

hwmon: (lm83) Convert to a new-style i2c driver

The new-style lm83 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

hwmon: (lm80) Convert to a new-style i2c driver

The new-style lm80 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>