NeilBrown [Mon, 26 Jun 2006 07:27:49 +0000 (00:27 -0700)]
[PATCH] md: Change md/bitmap file handling to use bmap to file blocks-fix
Fix problems with new bmap based access to bitmap files.
1/ When not using a file based bitmap, attach a NULL list of buffers
to each page so the common free_buffer routine can cope.
2/ Use submit_bh to read as well as write, rather than vfs_read.
This makes read and write more symetric.
3/ sync the file before reading, to ensure that the page cache has no
dirty pages that might get written out later.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:48 +0000 (00:27 -0700)]
[PATCH] md/bitmap: change md/bitmap file handling to use bmap to file blocks
If md is asked to store a bitmap in a file, it tries to hold onto the page
cache pages for that file, manipulate them directly, and call a cocktail of
operations to write the file out. I don't believe this is a supportable
approach.
This patch changes the approach to use the same approach as swap files. i.e.
bmap is used to enumerate all the block address of parts of the file and we
write directly to those blocks of the device.
swapfile only uses parts of the file that provide a full pages at contiguous
addresses. We don't have that luxury so we have to cope with pages that are
non-contiguous in storage. To handle this we attach buffers to each page, and
store the addresses in those buffers.
With this approach the pagecache may contain data which is inconsistent with
what is on disk. To alleviate the problems this can cause, md invalidates the
pagecache when releasing the file. If the file is to be examined while the
array is active (a non-critical but occasionally useful function), O_DIRECT io
must be used. And new version of mdadm will have support for this.
This approach simplifies a lot of code:
- we no longer need to keep a list of pages which we need to wait for,
as the b_endio function can keep track of how many outstanding
writes there are. This saves a mempool.
- -EAGAIN returns from write_page are no longer possible (not sure if
they ever were actually).
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:47 +0000 (00:27 -0700)]
[PATCH] md/bitmap: tidy up i_writecount handling in md/bitmap
md/bitmap modifies i_writecount of a bitmap file to make sure that no-one else
writes to it. The reverting of the change is sometimes done twice, and there
is one error path where it is omitted.
This patch tidies that up.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:46 +0000 (00:27 -0700)]
[PATCH] md/bitmap: remove unnecessary page reference manipulations from md/bitmap code
md/bitmap gets a collection of pages representing the bitmap when it
initialises the bitmap, and puts all the references when discarding the
bitmap.
It also occasionally takes extra references without any good reason, and
sometimes drops them ... though it doesn't always drop them, which can result
in a memory leak.
This patch removes the unnecessary 'get_page' calls, and the corresponding
'put_page' calls.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:45 +0000 (00:27 -0700)]
[PATCH] md/bitmap: cleaner separation of page attribute handlers in md/bitmap
md/bitmap has some attributes per-page. Handling of these attributes in
largely abstracted in set_page_attr and clear_page_attr. However
get_page_attr exposes the format used to store them. So prior to changing
that format, introduce test_page_attr instead of get_page_attr, and make
appropriate usage changes.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:44 +0000 (00:27 -0700)]
[PATCH] md/bitmap: remove bitmap writeback daemon
md/bitmap currently has a separate thread to wait for writes to the bitmap
file to complete (as we cannot get a callback on that action).
However this isn't needed as bitmap_unplug is called from process context and
waits for the writeback thread to do it's work. The same result can be
achieved by doing the waiting directly in bitmap_unplug.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:43 +0000 (00:27 -0700)]
[PATCH] md/bitmap: fix online removal of file-backed bitmaps
When "mdadm --grow /dev/mdX --bitmap=none" is used to remove a filebacked
bitmap, the bitmap was disconnected from the array, but the file wasn't closed
(until the array was stopped).
The file also wasn't closed if adding the bitmap file failed.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adrian Bunk [Mon, 26 Jun 2006 07:27:42 +0000 (00:27 -0700)]
[PATCH] md: make md_print_devices() static
This patch makes the needlessly global md_print_devices() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:41 +0000 (00:27 -0700)]
[PATCH] md: support stripe/offset mode in raid10
The "industry standard" DDF format allows for a stripe/offset layout where
data is duplicated on different stripes. e.g.
A B C D
D A B C
E F G H
H E F G
(columns are drives, rows are stripes, LETTERS are chunks of data).
This is similar to raid10's 'far' mode, but not quite the same. So enhance
'far' mode with a 'far/offset' option which follows the layout of DDFs
stripe/offset.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:40 +0000 (00:27 -0700)]
[PATCH] md: allow checkpoint of recovery with version-1 superblock
For a while we have had checkpointing of resync. The version-1 superblock
allows recovery to be checkpointed as well, and this patch implements that.
Due to early carelessness we need to add a feature flag to signal that the
recovery_offset field is in use, otherwise older kernels would assume that a
partially recovered array is in fact fully recovered.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:38 +0000 (00:27 -0700)]
[PATCH] md: merge raid5 and raid6 code
There is a lot of commonality between raid5.c and raid6main.c. This patches
merges both into one module called raid456. This saves a lot of code, and
paves the way for online raid5->raid6 migrations.
There is still duplication, e.g. between handle_stripe5 and handle_stripe6.
This will probably be cleaned up later.
Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:37 +0000 (00:27 -0700)]
[PATCH] md: increase the delay before marking metadata clean, and make it configurable
When a md array has been idle (no writes) for 20msecs it is marked as 'clean'.
This delay turns out to be too short for some real workloads. So increase it
to 200msec (the time to update the metadata should be a tiny fraction of that)
and make it sysfs-configurable.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:37 +0000 (00:27 -0700)]
[PATCH] md: remove useless ioctl warning
This warning was slightly useful back in 2.2 days, but is more an annoyance
now. It makes it awkward to add new ioctls (that we we are likely to do that
in the current climate, but it is possible).
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 26 Jun 2006 07:27:36 +0000 (00:27 -0700)]
[PATCH] md: remove arbitrary limit on chunk size
The largest chunk size the code can support without substantial surgery is
2^30 bytes, so make that the limit instead of an arbitrary 4Meg. Some day,
the 'chunksize' should change to a sector-shift instead of a byte-count. Then
no limit would be needed.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If you misuse the device-mapper interface (or there's a bug in your userspace
tools) it's possible to end up with 'unlinked' mapped devices that cannot be
removed until you reboot (along with uninterruptible processes).
This patch prevents you from removing a device that is still open.
It introduces dm_lock_for_deletion() which is called when a device is about to
be removed to ensure that nothing has it open and nothing further can open it.
It uses a private open_count for this which also lets us remove one of the
problematic bdget_disk() calls elsewhere.
Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move definitions of core device-mapper functions for manipulating mapped
devices and their tables to <linux/device-mapper.h> advertising their
availability for use elsewhere in the kernel.
Protect the contents of device-mapper.h with ifdef __KERNEL__. And throw
in a few formatting clean-ups and extra comments.
Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Merge dm_create() and dm_create_with_minor() by introducing the special value
DM_ANY_MINOR to request the allocation of the next available minor number.
Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kevin Corry [Mon, 26 Jun 2006 07:27:28 +0000 (00:27 -0700)]
[PATCH] dm mirror log: sector size fix
On-disk logs for dm-mirror devices are currently hard-coded to use 512 byte
hard-sector-sizes. This patch fixes dm-log so it will work with devices with
non-512-byte hard-sector-sizes.
To maintain full compatibility, instead of moving the clean-bits bitset to a
bitset, and enlarges the disk-header buffer to encompass both the header and
the bitset. The I/O routines for the bitset are removed, and the I/O routines
for the disk-header now also read/write the bitset.
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Neil Brown [Mon, 26 Jun 2006 07:27:26 +0000 (00:27 -0700)]
[PATCH] dm: mirror sector offset fix
The device-mapper core does not perform any remapping of bios before passing
them to the targets. If a particular mapping begins part-way into a device,
targets obtain the sector relative to the start of the mapping by subtracting
ti->begin.
The dm-raid1 target didn't do this everywhere: this patch fixes it, taking
care to subtract ti->begin exactly once for each bio.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Mahoney [Mon, 26 Jun 2006 07:27:25 +0000 (00:27 -0700)]
[PATCH] dm: fix block device initialisation
In alloc_dev(), we register the device with the block layer and then continue
to initialize the device. But register_disk() makes the device available to
be opened before we have completed initialising it.
This patch moves the final bits of the initialization above the disk
registration.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Mahoney [Mon, 26 Jun 2006 07:27:25 +0000 (00:27 -0700)]
[PATCH] dm: add module ref counting
The reference counting on dm-mod is zero if no mapped devices are open. This
is incorrect, and can lead to an oops if the module is unloaded while mapped
devices exist.
This patch claims a reference to the module whenever a device is created, and
drops it again when the device is freed.
Devices must be removed before dm-mod is unloaded.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Mahoney [Mon, 26 Jun 2006 07:27:23 +0000 (00:27 -0700)]
[PATCH] dm: add DMF_FREEING
There is a chicken and egg problem between the block layer and dm in which the
gendisk associated with a mapping keeps a reference-less pointer to the
mapped_device.
This patch uses a new flag DMF_FREEING to indicate when the mapped_device is
no longer valid. This is checked to prevent any attempt to open the device
from succeeding while the device is being destroyed.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Mahoney [Mon, 26 Jun 2006 07:27:21 +0000 (00:27 -0700)]
[PATCH] dm: fix idr minor allocation
One part of the system can attempt to use a mapped device before another has
finished initialising it or while it is being freed.
This patch introduces a place holder value, MINOR_ALLOCED, to mark the minor
as allocated but in a state where it can't be used, such as mid-allocation or
mid-free. At the end of the initialization, it replaces the place holder with
the pointer to the mapped_device, making it available to the rest of the dm
subsystem.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Persistent snapshots currently store a private copy of the chunk size.
Userspace also supplies the chunk size when loading a snapshot. Ensure
consistency by only storing the chunk_size in one place instead of two.
Currently the two sizes will differ if the chunk size supplied by userspace
does not match the chunk size an existing snapshot actually uses. Amongst
other problems, this causes an incorrect 'percentage full' to be reported.
The patch ensures consistency by only storing the chunk_size in one place,
removing it from struct pstore. Some initialisation is delayed until the
correct chunk_size is known. If read_header() discovers that the wrong chunk
size was supplied, the 'area' buffer (which the header already got read into)
is reinitialised to the correct size.
[akpm: too late for 2.6.17 - suitable for 2.6.17.x after it has settled]
Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] VT binding: Do not create a device file for class device 'fbcon'
The class device "fbcon" does not need to be a device file. Do not create one
by passing a major and minor number of zero to
class_device_create()/destroy().
[PATCH] VT binding: Make VT binding a Kconfig option
To enable this feature, CONFIG_VT_HW_CONSOLE_BINDING must be set to 'y'. This
feature will default to 'n' to minimize users accidentally corrupting their
virtual terminals.
[PATCH] VT binding: Add sysfs control to the VT layer
Add sysfs control to the VT layer. A new sysfs class, 'vtconsole', and class
devices 'vtcon[n]' are added. Each class device file has the following
attributes:
/sys/class/vtconsole/vtcon[n]/name - read-only attribute showing the
name of the current backend
/sys/class/vtconsole/vtcon[n]/bind - read/write attribute
where: 0 - backend is unbound/unbind backend from the VT layer
1 - backend is bound/bind backend to the VT layer
In addition, if any of the consoles are in KD_GRAPHICS mode, binding and
unbinding will not succeed. KD_GRAPHICS mode usually indicates that the
underlying console hardware is used for other purposes other than displaying
text (ie X). This feature should prevent binding/unbinding from interfering
with a graphics application using the VT.
[PATCH] VT binding: Update fbcon to support binding
The control for binding/unbinding is moved from fbcon to the console layer.
Thus the fbcon sysfs attributes, attach and detach, are also gone.
1. Add a notifier event that tells fbcon if a framebuffer driver has been
unregistered. If no registered driver remains, fbcon will unregister
itself from the console layer.
2. Replaced calls to give_up_console() with unregister_con_driver().
3. Still use take_over_console() instead of register_con_driver() to
maintain compatibility
4. Respect the parameter first_fb_vc and last_fb_vc instead of using 0 and
MAX_NR_CONSOLES - 1. These parameters are settable by the user.
5. When fbcon is completely unbound from the console layer, fbcon will
also release (iow, decrement module reference counts to zero) all fbdev
drivers. In other words, a bind or unbind request from the console layer
will propagate down to the framebuffer drivers.
6. If fbcon is not bound to the console, it will ignore all notifier
events (except driver registration and unregistration) and all sysfs
requests.
[PATCH] VT binding: Add binding/unbinding support for the VT console
The framebuffer console is now able to dynamically bind and unbind from the VT
console layer. Due to the way the VT console layer works, the drivers
themselves decide when to bind or unbind. However, it was decided that
binding must be controlled, not by the drivers themselves, but by the VT
console layer. With this, dynamic binding is possible for all VT console
drivers, not just fbcon.
Thus, the VT console layer will impose the following to all VT console
drivers:
- all registered VT console drivers will be entered in a private list
- drivers can register themselves to the VT console layer, but they cannot
decide when to bind or unbind. (Exception: To maintain backwards
compatibility, take_over_console() will automatically bind the driver after
registration.)
- drivers can remove themselves from the list by unregistering from the VT
console layer. A prerequisite for unregistration is that the driver must not
be bound.
The following functions are new in the vt.c:
register_con_driver() - public function, this function adds the VT console
driver to an internal list maintained by the VT console
bind_con_driver() - private function, it binds the driver to the console
take_over_console() is changed to call register_con_driver() followed by a
bind_con_driver(). This is the only time drivers can decide when to bind to
the VT layer. This is to maintain backwards compatibility.
unbind_con_driver() - private function, it unbinds the driver from its
console. The vacated consoles will be taken over by the default boot console
driver.
unregister_con_driver() - public function, removes the driver from the
internal list maintained by the VT console. It will only succeed if the
driver is currently unbound.
con_is_bound() checks if the driver is currently bound or not
give_up_console() is just a wrapper to unregister_con_driver().
There are also 3 additional functions meant to be called only by the tty layer
for sysfs control:
vt_bind() - calls bind_con_driver()
vt_unbind() - calls unbind_con_driver()
vt_show_drivers() - shows the list of registered drivers
Most VT console drivers will continue to work as is, but might have problems
when unbinding or binding which should be fixable with minimal changes.
[PATCH] Detaching fbcon: add capability to attach/detach fbcon
Add the ability to detach and attach the framebuffer console to and from the
vt layer. This is done by echo'ing any value to sysfs attributes located in
class/graphics/fbcon. The two attributes are:
attach - bind fbcon to the vt layer
detach - unbind fbcon from the vt layer
Once fbcon is detached from the vt layer, fbcon can be unloaded if compiled as
a module. This feature is quite useful for developers who work on the
framebuffer or console subsystem. This is also useful for users who want to
go to text mode or graphics mode without having to reboot.
Directly unloading the fbcon module is not possible because the vt layer
increments the module reference count for all bound consoles. Detaching fbcon
decrements the module reference count to zero so unloading becomes possible.
[PATCH] Detaching fbcon: sdd sysfs class device entry for fbcon
In order for this feature to work, an interface will be needed. The most
appropriate is sysfs. However, the framebuffer console has no sysfs entry
yet. This will create a sysfs class device entry for fbcon under
/sys/class/graphics.
Add a class_device entry 'fbcon' under class 'graphics'. Console-specific
attributes which where previously under class/graphics/fb[x] are moved to
class/graphics/fbcon. These attributes, 'con_rotate' and 'con_rotate_all',
are also renamed to 'rotate' and 'rotate_all' respectively.
[PATCH] Detaching fbcon: remove calls to pci_disable_device()
Detaching fbcon allows individual drivers to be unloaded. However several
drivers call pci_disable_device() upon exit. This function will disable the
BAR's which will kill VGA text mode and/or affect X/DRM.
To prevent this, remove calls to pci_disable_device() from several drivers.
To allow for detaching fbcon, it must be able to give up the console.
However, the function give_up_console() is plain broken. It just sets the
entries in the console driver map to NULL, it leaves the vt layer without a
console driver, and does not decrement the module reference count. Calling
give_up_console() is guaranteed to hang the machine..
To fix this problem, ensure that the virtual consoles are not left dangling
without a driver. All systems have a default boot driver (either vgacon or
dummycon) which is never unloaded. For those vt's that lost their driver, the
default boot driver is reassigned back to them.
[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console
One of the limitations of the framebuffer console system is its inablity to
unload or detach itself from the console layer. And once it loads, it also
locks in framebuffer drivers preventing their unload. Although the con2fbmap
utility does provide a means to unload individual drivers, it requires that at
least one framebuffer driver is loaded for use by fbcon.
With this change, it is possible to detach fbcon from the console layer. If it
is detached, it will reattach the boot console driver (which is permanently
loaded) back to the console layer so the system can continue to work. As a
consequence, fbcon will also decrement its reference count of individual
framebuffer drivers, allowing all of these drivers to be unloaded even if
fbcon is still loaded.
Unless you use drivers that restores the display to text mode (rivafb and
i810fb, for example), detaching fbcon does require assistance from userspace
tools (ie, vbetools) for text mode to be restored completely. Without the
help of these tools, fbcon will leave the VGA console corrupted. The methods
that can be used will be described in Documentation/fb/fbcon.txt.
Because the vt layer also increments the module reference count for each
console driver, fbcon cannot be directly unloaded. It must be detached first
prior to unload.
Similarly, fbcon can be reattached to the console layer without having to
reload the module. A nice feature if fbcon is compiled statically.
Attaching and detaching fbcon is done via sysfs attributes. A class device
entry for fbcon is created in /sys/class/graphics. The two attributes that
controls this feature are detach and attach. Two other attributes that are
piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific,
'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as
'rotate' and 'rotate_all' respectively.
Overall, this feature is a great help for developers working in the
framebuffer or console layer. There is not need to continually reboot the
kernel for every small change. It is also useful for regular users who wants
to choose between a graphical console or a text console without having to
reboot.
Example usage for x86:
/* start in text mode */
modprobe xxxfb
modprobe fbcon
/* graphical mode with fbcon using xxxfb */
echo 1 > /sys/class/graphics/fbcon/detach
/* back to text mode, will produce corrupt display unless vbetool is used */
rmmod xxxfb
modprobe yyyfb
/* back to graphical mode with fbcon using yyyfb */
Before trying out this feature, please read Documentation/fb/fbcon.txt.
This patch:
In order for fbcon to detach itself from the console layer, vgacon, which is a
boot console driver, must be fixed so it can retake the console multiple
times, not just during init. The following needs to be done:
- remove __init from the vgacon_startup, this is called again by
take_over_console().
- vc->rows and vc->cols are set manually by vgacon during init. After init,
vc_resize() can be used
- make sure the scrollback_buffer is not reallocated
Modify the sysfs description of a video mode such that modes are tagged with
their scan type, (p)rogessive, (i)nterlaced, (d)ouble scan. For example,
U:1920x1080i-50. This is useful to disambiguate some of the 'consumer' video
timings found in CEA-861 (especially those for EDTV).
Signed-off-by: Daniel R Thompson <daniel.thompson@st.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
WARNING: drivers/video/aty/atyfb.o - Section mismatch: reference to
.init.text:aty_init_cursor from .text between 'aty_init' (at offset 0x241d)
and 'atyfb_blank'
WARNING: drivers/video/macmodes.o - Section mismatch: reference to
.init.text:mac_find_mode from __ksymtab after '__ksymtab_mac_find_mode' (at
offset 0x10)
[PATCH] fbdev: Fix logo rotation if width != height
Logo drawing crashes or produces a corrupt display if the logo width and
height are not equal. The dimensions are transposed prior to the actual
rotation and the width is used instead of the height in the actual rotation
code. These produce a corrupt image.
[PATCH] neofb: fix unblank logic interfering with lid toggled backlight
This is a fix for the most annoying problem that remained with neofb:
After "setterm -powersave powerdown" the console blanker will disable the
backlight after the given timeout expires. If this happens after the lid
has been shut, we read "LCD off" from the register and store that in the
driver. Once the lid is opened, the backlight turns on, but any key press
that would awaken the blanked console will switch the backlight off again.
The workaround so far was to use the "display config toggle" Fn key combo -
once if no external display is attached, otherwise as often as required to
restore the desired display setup.
The following patch fixes the issue at least for the LCD-only case, with no
external monitor attached. Other display setup permutations are pending
further testing, but so far I can guarantee at least no negative change in
behaviour, if any at all.
Signed-off-by: Christian Trefzer <ctrefzer@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
CONFIG_FB = m and CONFIG_{BACKLIGHT:LCD}_CLASS_DEVICE = y is possible
resulting in link errors. Fix by making backlight and lcd class also depend
on FB
Arnaud Patard [Mon, 26 Jun 2006 07:26:45 +0000 (00:26 -0700)]
[PATCH] s3c2410fb: Fix resume
regs.lcdcon1 was not updated on suspend. The result was a garbaged display on
resume. This bug was first noticed by Christer Weinigel. This patch is a
modified version of the one he sent to me.
David Hollister [Mon, 26 Jun 2006 07:26:41 +0000 (00:26 -0700)]
[PATCH] vt: Delay the update of the visible console
Delay the update of the visible framebuffer console until all other consoles
have been initialized in order to avoid losing information. This only seems
to be a problem with modules, not with built-in drivers.
Signed-off-by: David Hollister <david.hollister@amd.com> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] atyfb: Remove unneeded calls to wait_for_idle
The drawing functions of atyfb is unecessary syncing the GPU which is
affecting performance. Remove the calls, any direct access by fbcon to the
framebuffer will always be preceeded by a call to atyfb_sync().
- In the 2-bit scheme of the cursor image, just set the first bit to be
always zero (turn off transparency and/or XOR), and just do the masking
manually
- The cursor color is converted into 32-bit RGBA8888 using struct fb_cmap.
Each component in the cmap is u16 in size, so mask the upper 8 bits.
nVidia is churning out chipsets like there's no tomorrow. And even though the
pci_device_id table now has numerous entries, it is still not guaranteed that
all supported devices are included or will be included.
Fortunately, nvidiafb has chipset detection logic built in. So, change the
contents of the pci_device_id table so it will capture all nVidia devices of
the display class. Unsupported chipsets will then be filtered out by
nvidiafb's detection logic.
[PATCH] fbdev: More accurate sync range extrapolation
The EDID block should specify the display's operating limits (vertical and
horizontal sync ranges, and maximum dot clock). If not given by the EDID
block, the ranges are extrapolated from the modelist. However, the
computation used is only a rough approximation, and the resulting values may
not reflect the actual capability of the display. This problem is frequently
encountered when the EDID block has a single entry, the single mode entry will
fail validation.
To prevent this, calculate the values based on the same method used in
fb_validate_mode().
[PATCH] savagefb: Add state save and_restore hooks
Reported by: Rich (Bugzilla Bug 6417)
"if savage driver is used in x.org together with savagefb, it results in
seriously garbled and distorted screen - coupled with severe slowdowns."
This bug is the result of Xorg unable to handle savagefb altering the
hardware which results in X failing to start properly and/or failed console
switching.
Add savagefb_state_save and savagefb_state_restore. These hooks will only
save and restore the extended VGA registers. Standard VGA registers will be
left alone. This is enough to make savagefb play nicely with the latest
Xorg savage driver, and perhaps with savage DRI. (Transient screen artifacts
may appear before X loads and during console switches).
(Unfortunately, blanking the screen also leaves Xorg in a blanked state, so I
have to unblank the screen before Xorg loads. So I doubt if the transient
screen artifacts will be completely invisible but hopefully it will only be
for a shorter duration (not much).)
[PATCH] savagefb: Allocate space for current and saved register states
Allocate space for 2 register states: 'current' for the current state of
the hardware, and 'saved', to be used for restoring the hardware to a sane
state. This is in preparation for the addition of state save and restore
hooks to make savagefb work together with the latest Xorg savage driver.
projects / linux-2.6 / log