Denis V. Lunev [Thu, 10 Jan 2008 11:52:35 +0000 (03:52 -0800)]
[ATM]: Simplify /proc/net/atm/arp opening
The iterator state->ns.neigh_sub_iter initialization is moved from
arp_seq_open to clip_seq_start for convinience. This should not be a
problem as the iterator will be used only after the seq_start
callback.
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:51:41 +0000 (03:51 -0800)]
[ATM]: Oops reading net/atm/arp
cat /proc/net/atm/arp causes the NULL pointer dereference in the
get_proc_net+0xc/0x3a. This happens as proc_get_net believes that the
parent proc dir entry contains struct net.
Denis V. Lunev [Thu, 10 Jan 2008 11:30:49 +0000 (03:30 -0800)]
[NETNS]: Enable routing configuration in non-initial namespace.
I.e. remove the net != &init_net checks from the places, that now can
handle other-than-init net namespace.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:30:24 +0000 (03:30 -0800)]
[NETNS]: Replace init_net with the correct context in fib_frontend.c
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:29:53 +0000 (03:29 -0800)]
[NETNS]: Pass namespace through ip_rt_ioctl.
... up to rtentry_to_fib_config
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:29:23 +0000 (03:29 -0800)]
[NETNS]: Correctly fill fib_config data.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:28:55 +0000 (03:28 -0800)]
[NETNS]: Provide correct namespace for fibnl netlink socket.
This patch makes the netlink socket to be per namespace. That allows
to have each namespace its own socket for routing queries.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:28:24 +0000 (03:28 -0800)]
[NETNS]: Place fib tables into netns.
The preparatory work has been done. All we need is to substitute
fib_table_hash with net->ipv4.fib_table_hash. Netns context is
available when required.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:27:51 +0000 (03:27 -0800)]
[NETNS]: Namespacing IPv4 fib rules.
The final trick for rules: place fib4_rules_ops into struct net and
modify initialization path for this.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:27:17 +0000 (03:27 -0800)]
[NETNS]: Show routing information from correct namespace (fib_trie.c)
This is the second part (for the CONFIG_IP_FIB_TRIE case) of the patch
#4, where we have created proc files in namespaces.
Now we can dump correct info in them.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:26:50 +0000 (03:26 -0800)]
[NETNS]: Show routing information from correct namespace (fib_hash.c)
This is the second part (for the CONFIG_IP_FIB_HASH case) of the patch
#4, where we have created proc files in namespaces.
Now we can dump correct info in them.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:26:13 +0000 (03:26 -0800)]
[NETNS]: Add netns to nl_info structure.
nl_info is used to track the end-user destination of routing change
notification. This is a natural object to hold a namespace on. Place
it there and utilize the context in the appropriate places.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[NETNS]: Add netns parameter to inet_(dev_)add_type.
The patch extends the inet_addr_type and inet_dev_addr_type with the
network namespace pointer. That allows to access the different tables
relatively to the network namespace.
The modification of the signature function is reported in all the
callers of the inet_addr_type using the pointer to the well known
init_net.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:24:11 +0000 (03:24 -0800)]
[NETNS]: Add netns parameter to fib_get_table/fib_new_table.
This patch extends the fib_get_table and the fib_new_table functions
with the network namespace pointer. That will allow to access the
table relatively from the network namespace.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:23:38 +0000 (03:23 -0800)]
[IPV4]: Unify access to the routing tables.
Replace the direct pointers to local and main tables with
calls to fib_get_table() with appropriate argument.
This doesn't introduce additional dereferences, but makes the access to fib
tables uniform in any (CONFIG_IP_MULTIPLE_TABLES) case.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:22:17 +0000 (03:22 -0800)]
[NETNS]: Refactor fib initialization so it can handle multiple namespaces.
This patch makes the fib to be initialized as a subsystem for the
network namespaces. The code does not handle several namespaces yet,
so in case of a creation of a network namespace, the
creation/initialization will not occur.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:21:49 +0000 (03:21 -0800)]
[IPV4]: Check fib4_rules_init failure.
This adds error paths into both versions of fib4_rules_init
(with/without CONFIG_IP_MULTIPLE_TABLES) and returns error code to the
caller.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:21:09 +0000 (03:21 -0800)]
[NETNS]: Add namespace to API for routing /proc entries creation.
This adds netns parameter to fib_proc_init/exit and replaces __init
specifier with __net_init. After this, we will not yet have these proc
files show info from the specific namespace - this will be done when
these tables become namespaced.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:20:28 +0000 (03:20 -0800)]
[NETNS]: Namespacing in the generic fib rules code.
Move static rules_ops & rules_mod_lock to the struct net, register the
pernet subsys to init them and enjoy the fact that the core rules
infrastructure works in the namespace.
Real IPv4 fib rules virtualization requires fib tables support in the
namespace and will be done seriously later in the patchset.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:18:25 +0000 (03:18 -0800)]
[NETNS]: Pass fib_rules_ops into default_pref method.
fib_rules_ops contains operations and the list of configured rules. ops will
become per/namespace soon, so we need them to be known in the default_pref
callback.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 10 Jan 2008 11:17:29 +0000 (03:17 -0800)]
[NETNS]: Add netns parameter to fib_rules_(un)register.
The patch extends the different fib rules API in order to pass the
network namespace pointer. That will allow to access the different
tables from a namespace relative object. As usual, the pointer to the
init_net variable is passed as parameter so we don't break the
network.
Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 10 Jan 2008 10:57:43 +0000 (02:57 -0800)]
[NETNS][IPV6]: Make mld_max_msf readonly in other namespaces.
The mld_max_msf protects the system with a maximum allowed multicast
source filters. Making this variable per namespace can be potentially
an problem if someone inside a namespace set it to a big value, that
will impact the whole system including other namespaces.
I don't see any benefits to have it per namespace for now, so in order
to keep a directory entry in a newly created namespace, I make it
read-only when we are not in the initial network namespace.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 10 Jan 2008 10:56:03 +0000 (02:56 -0800)]
[NETNS][IPV6]: Make ip6_frags per namespace.
The ip6_frags is moved to the network namespace structure. Because
there can be multiple instances of the network namespaces, and the
ip6_frags is no longer a global static variable, a helper function has
been added to facilitate the initialization of the variables.
Until the ipv6 protocol is not per namespace, the variables are
accessed relatively from the initial network namespace.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 10 Jan 2008 10:54:53 +0000 (02:54 -0800)]
[NETNS][IPV6]: Make bindv6only sysctl per namespace.
This patch moves the bindv6only sysctl to the network namespace
structure. Until the ipv6 protocol is not per namespace, the sysctl
variable is always from the initial network namespace.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 10 Jan 2008 10:53:43 +0000 (02:53 -0800)]
[NETNS][IPV6]: Make multiple instance of sysctl tables.
Each network namespace wants its own set of sysctl value, eg. we
should not be able from a namespace to set a sysctl value for another
namespace , especially for the initial network namespace.
This patch duplicates the sysctl table when we register a new network
namespace for ipv6. The duplicated table are postfixed with the
"template" word to notify the developper the table is cloned.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 10 Jan 2008 10:49:34 +0000 (02:49 -0800)]
[NETNS][IPV6]: Make the ipv6 sysctl to be a netns subsystem.
The initialization of the sysctl for the ipv6 protocol is changed to a
network namespace subsystem. That means when a new network namespace
is created the initialization function for the sysctl will be called.
That do not change the behavior of the sysctl in case of the kernel
with the network namespace disabled.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 10 Jan 2008 10:48:33 +0000 (02:48 -0800)]
[NETNS][IPV6]: Make a subsystem for af_inet6.
This patch add a network namespace subsystem for the af_inet6 module.
It does nothing right now, but one of its purpose is to receive the
different variables for sysctl in order to initialize them.
When the sysctl variable will be moved to the network namespace
structure, they will be no longer initialized as global static
variables, so we must find a place to initialize them. Because the
sysctl can be disabled, it has no sense to store them in the
sysctl_net_ipv6 file.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 10 Jan 2008 10:47:55 +0000 (02:47 -0800)]
[NETNS][IPV6]: Make ipv6_sysctl_register to return a value.
This patch makes the function ipv6_sysctl_register to return a
value. The af_inet6 init function is now able to handle an error and
catch it from the initialization of the sysctl.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 9 Jan 2008 08:34:02 +0000 (00:34 -0800)]
[NETFILTER]: Use the ctl paths instead of hand-made analogue
The conntracks subsystem has a similar infrastructure
to maintain ctl_paths, but since we already have it
on the generic level, I think it's OK to switch to
using it.
So, basically, this patch just replaces the ctl_table-s
with ctl_path-s, nf_register_sysctl_table with
register_sysctl_paths() and removes no longer needed code.
After this the net/netfilter/nf_sysctl.c file contains
the paths only.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 9 Jan 2008 08:31:49 +0000 (00:31 -0800)]
[DECNET]: Switch to using ctl_paths.
The decnet includes two places to patch. The first one is
the net/decnet table itself, and it is patched just like
other subsystems in the first patch in this series.
The second place is a bit more complex - it is the
net/decnet/conf/xxx entries,. similar to those in
ipv4/devinet.c and ipv6/addrconf.c. This code is made similar
to those in ipv[46].
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sat, 12 Jan 2008 10:33:50 +0000 (02:33 -0800)]
[IPVS]: Switch to using ctl_paths.
The feature of ipvs ctls is that the net/ipv4/vs path
is common for core ipvs ctls and for two schedulers,
so I make it exported and re-use it in modules.
Two other .c files required linux/sysctl.h to make the
extern declaration of this path compile well.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 9 Jan 2008 07:54:43 +0000 (23:54 -0800)]
[VLAN]: Avoid expensive divides
We can avoid divides (as seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y on
x86) changing vlan_group_get_device()/vlan_group_set_device() id
parameter from signed to unsigned.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Wed, 9 Jan 2008 07:48:20 +0000 (23:48 -0800)]
[TIPC]: Use tipc_port_unlock
The file net/tipc/port.c takes a lock using the function tipc_port_lock and
then releases the lock sometimes using tipc_port_unlock and sometimes using
spin_unlock_bh(p_ptr->publ.lock). tipc_port_unlock simply does the
spin_unlock_bh, but it seems cleaner to use it everywhere.
The problem was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)
Ivo van Doorn [Mon, 7 Jan 2008 18:45:24 +0000 (19:45 +0100)]
mac80211: Add radio led trigger
Some devices have a seperate LED which indicates if the radio is
enabled or not. This adds a LED trigger to mac80211 where drivers
can hook into when they are interested in radio status changes.
v2: Check hw.conf.radio_enabled when calling start().
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
I would argue that mac80211 should handle fixed rates outside the rate
control code, which would also allow them to take effect immediately
instead of during the rate control callback, but this is pretty close
to correct.
Signed-Off-By: Andy Lutomirski <luto@myrealbox.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Wed, 2 Jan 2008 14:17:03 +0000 (15:17 +0100)]
mac80211: better rate control algorithm selection
This patch changes mac80211's Kconfig/Makefile to:
* select between the PID and the SIMPLE rate control
algorithm as default
* always allow tri-state for the rate control algorithms,
building those that are selected 'y' into the mac80211
module (if that is a module, otherwise all into the kernel)
* force the default rate control algorithm to be built into
mac80211
It also makes both rate control algorithms proper modules again
with MODULE_LICENSE etc.
Only if EMBEDDED is the user allowed to select "NONE" as default
which will cause no algorithm to be selected, this will work
only when the driver brings one itself (e.g. iwlwifi drivers).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Tue, 25 Dec 2007 15:00:37 +0000 (17:00 +0200)]
mac80211: A-MPDU Rx handling DELBA requests
This patch opens the flow to DELBA management frames, and handles end
of A-MPDU session produced by this event.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Tue, 25 Dec 2007 15:00:36 +0000 (17:00 +0200)]
mac80211: A-MPDU Rx adding BAR handling capability
This patch adds the ability to handle Block Ack Request
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch handles the reordering of the Rx A-MPDU.
This issue occurs when the sequence of the internal MPDUs is not in the
right order. such a case can be encountered for example when some MPDUs from
previous aggregations were recieved, while others failed, so current A-MPDU
will contain a mix of re-transmited MPDUs and new ones.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Tue, 25 Dec 2007 15:00:34 +0000 (17:00 +0200)]
mac80211: A-MPDU Rx MLME data initialization
This patch initialize A-MPDU MLME data for Rx sessions.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Tue, 25 Dec 2007 15:00:33 +0000 (17:00 +0200)]
mac80211: A-MPDU Rx adding basic functionality
This patch adds the basic needed abilities and functions for A-MPDU Rx session
changed functions:
- ieee80211_sta_process_addba_request - Rx A-MPDU initialization enabled
- ieee80211_stop - stops all A-MPDU Rx in case interface goes down
added functions:
- ieee80211_send_delba - used for sending out Del BA in A-MPDU sessions
- ieee80211_sta_stop_rx_BA_session - stopping Rx A-MPDU session
- sta_rx_agg_session_timer_expired - stops A-MPDU Rx use if load is too
low
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Tue, 25 Dec 2007 15:00:32 +0000 (17:00 +0200)]
mac80211: A-MPDU Rx add MLME structures
This patch adds the needed structures to describe the Rx aggregation MLME per STA
new:
- struct tid_ampdu_rx: TID aggregation information (Rx)
- struct sta_ampdu_mlme: MLME aggregation information for STA
changed:
- struct sta_info: ampdu_mlme added to describe A-MPDU MLME per STA,
and timer_to_tid added to map timer id into TID
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Tue, 25 Dec 2007 15:00:31 +0000 (17:00 +0200)]
mac80211: A-MPDU Rx add low level driver API
This patch adds the API to perform A-MPDU actions between mac80211 and low
level driver.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Mon, 24 Dec 2007 11:36:39 +0000 (13:36 +0200)]
mac80211: restructure __ieee80211_rx
This patch makes a separation between Rx frame pre-handling which stays in
__ieee80211_rx and Rx frame handlers, moving to __ieee80211_rx_handle_packet.
Although this separation has no affect in regular mode of operation, this kind
of mechanism will be used in A-MPDU frames reordering as it allows accumulation
of frames during pre-handling, dispatching them to later handling when necessary.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Sun, 23 Dec 2007 21:05:25 +0000 (22:05 +0100)]
mac80211: make rc_pid_fop_events static
No need to not be.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Sun, 23 Dec 2007 16:49:00 +0000 (17:49 +0100)]
rc80211-pid: fix definition of rate control interval
Fix the rate control interval definition. Thanks to Mattias Nissler for
spotting this out.
Cc: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Sun, 23 Dec 2007 09:11:55 +0000 (10:11 +0100)]
mac80211: remove misleading 'res' variable
When this function returns != CONTINUE, it needs to put the
station struct it has acquired. Hence, having this unused
variable is not just superfluous but also misleading.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Sun, 23 Dec 2007 03:46:27 +0000 (04:46 +0100)]
rc80211-pid: add MAINTAINERS entry
Add an entry in MAINTAINERS for rc80211-pid.
Cc: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Sun, 23 Dec 2007 03:44:56 +0000 (04:44 +0100)]
rc80211-pid: pf_target tuning
Set a better value for percentage target for failed frames. The previous value
slowed down too much rate increases in case of permanently low activity. While
at it, increase readability.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Sun, 23 Dec 2007 03:43:57 +0000 (04:43 +0100)]
rc80211-pid: fix sta_info refcounting
Fix a bug which caused uncorrect refcounting of PHYs in mac80211. Thanks to
Johannes Berg for spotting this out.
Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Sun, 23 Dec 2007 03:41:19 +0000 (04:41 +0100)]
rc80211-pid: simplify and fix shift_adjust
Simplify and fix rate_control_pid_shift_adjust(). A bug prevented correct
mapping of sorted rates, and readability was seriously flawed.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Sun, 23 Dec 2007 03:40:32 +0000 (04:40 +0100)]
rc80211-pid: add kerneldoc for tunable parameters
Add a kerneldoc description for parameters which are tunable through debugfs.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Sun, 23 Dec 2007 03:39:17 +0000 (04:39 +0100)]
rc80211-pid: export human-readable target_pf value to debugfs
Export the non-shifted target_pf value to debugfs, so that it's human-readable.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Helmut Schaa [Fri, 21 Dec 2007 14:16:35 +0000 (15:16 +0100)]
mac80211: Restore rx.fc before every invocation of ieee80211_invoke_rx_handlers
This patch fixes a problem with rx handling on multiple interfaces. Especially
when using hardware-scanning and a wireless driver (i.e. iwlwifi) which is
able to receive data while scanning.
The rx handlers can modify the skb and the frame control field (see
ieee80211_rx_h_remove_qos_control) but since every interface gets its own
copy of the skb each should get its own copy of rx.fc too.
In my case the wlan0-interface did not remove the qos-control from the frame
because the corresponding flag in rx.fc was already removed while processing
the frame on the master interface. Therefore somehow corrupted frames were
passed to the userspace.
Signed-off-by: Helmut Schaa <hschaa@suse.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 8 Jan 2008 09:35:52 +0000 (01:35 -0800)]
[XFRM]: xfrm_state_clone() should be static, not exported
xfrm_state_clone() is not used outside of net/xfrm/xfrm_state.c
There is no need to export it.
Spoted by sparse checker.
CHECK net/xfrm/xfrm_state.c
net/xfrm/xfrm_state.c:1103:19: warning: symbol 'xfrm_state_clone' was not
declared. Should it be static?
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 8 Jan 2008 06:38:42 +0000 (22:38 -0800)]
[BLUETOOTH]: Use sockfd_put()
The function sockfd_lookup uses fget on the value that is stored in
the file field of the returned structure, so fput should ultimately be
applied to this value. This can be done directly, but it seems better
to use the specific macro sockfd_put, which does the same thing.
The problem was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression s;
@@
s = sockfd_lookup(...)
...
+ sockfd_put(s);
?- fput(s->file);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 8 Jan 2008 06:34:29 +0000 (22:34 -0800)]
[XFRM] xfrm_policy_destroy: Rename and relative fixes.
Since __xfrm_policy_destroy is used to destory the resources
allocated by xfrm_policy_alloc. So using the name
__xfrm_policy_destroy is not correspond with xfrm_policy_alloc.
Rename it to xfrm_policy_destroy.
And along with some instances that call xfrm_policy_alloc
but not using xfrm_policy_destroy to destroy the resource,
fix them.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Without a number of CONFIG.*DEBUGs, I got this:
net/netfilter/nf_conntrack_netlink.o:
16 functions changed, 2122 bytes added, 11029 bytes removed, diff: -8907
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zefan [Fri, 4 Jan 2008 09:55:01 +0000 (01:55 -0800)]
[CONNECTOR]: clean up {,__}cn_rx_skb()
- __cn_rx_skb() does nothing but calls cn_call_callback(), it doesn't
check skb and msg sizes as the comment suggests, but cn_rx_skb() checks
those sizes.
- In cn_rx_skb() Local variable 'len' is not used. 'len' is probably
intended to be passed to skb_pull(), but here skb_pull() is not needed,
instead skb_free() is called.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 4 Jan 2008 04:41:28 +0000 (20:41 -0800)]
[LIB] pcounter : unline too big functions
Before pushing pcounter to Linus tree, I would like to make some adjustments.
Goal is to reduce kernel text size, by unlining too big functions.
When a pcounter is bound to a statically defined per_cpu variable,
we define two small helpers functions. (No more folding function
using the fat for_each_possible_cpu(cpu) ... )
static DEFINE_PER_CPU(int, NAME##_pcounter_values);
static void NAME##_pcounter_add(struct pcounter *self, int val)
{
__get_cpu_var(NAME##_pcounter_values) += val;
}
static int NAME##_pcounter_getval(const struct pcounter *self, int cpu)
{
return per_cpu(NAME##_pcounter_values, cpu);
}
Fast path is therefore unchanged, while folding/alloc/free is now unlined.
This saves 228 bytes on i386
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Fri, 4 Jan 2008 04:36:55 +0000 (20:36 -0800)]
[TCP]: cleanup tcp_parse_options deep indented switch
Removed case indentation level & combined some nested ifs, mostly
within 80 lines now. This is a leftover from indent patch, it
just had to be done manually to avoid messing it up completely.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 2 Jan 2008 07:52:59 +0000 (23:52 -0800)]
[IPSEC]: Return EOVERFLOW when output sequence number overflows
Previously we made it an error on the output path if the sequence number
overflowed. However we did not set the err variable accordingly. This
patch sets err to -EOVERFLOW in that case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Rami Rosen [Wed, 2 Jan 2008 05:13:09 +0000 (21:13 -0800)]
[IPV4]: Remove three declarations of unimplemented methods and correct a typo in include/net/ip.h
These three declarations in include/net/ip.h are not implemented
anywhere:
ip_mc_dropsocket(), ip_mc_dropdevice() and ip_net_unreachable().
Also, correct a comment to be "Functions provided by ip_fragment.c"
(instead of by ip_fragment.o) in consistency with the other comments
in this header.
Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For five years we had two xfrm_policy_flush prototypes and every time that
function's signature changed people have been diligently updating both of
them without noticing :)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Mon, 31 Dec 2007 22:57:14 +0000 (14:57 -0800)]
[TCP]: cleanup tcp_{in,out}put.c style
These were manually selected from indent's results which as is
are too noisy to be of any use without human reason. In addition,
some extra newlines between function and its comment were removed
too.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Mon, 31 Dec 2007 12:50:19 +0000 (04:50 -0800)]
[TCP]: Remove TCPCB_URG & TCPCB_AT_TAIL as unnecessary
The snd_up check should be enough. I suspect this has been
there to provide a minor optimization in clean_rtx_queue which
used to have a small if (!->sacked) block which could skip
snd_up check among the other work.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Mon, 31 Dec 2007 12:49:21 +0000 (04:49 -0800)]
[TCP]: Dropped unnecessary skb/sacked accessing in reneging
SACK reneging can be precalculated to a FLAG in clean_rtx_queue
which has the right skb looked up. This will help a bit in
future because skb->sacked access will be changed eventually,
changing it already won't hurt any.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6 / log