]> err.no Git - linux-2.6/log
linux-2.6
17 years ago[SPARC64]: Fix conflicts in SBUS/PCI/EBUS/ISA DMA handling.
David S. Miller [Sat, 28 Jul 2007 05:39:14 +0000 (22:39 -0700)]
[SPARC64]: Fix conflicts in SBUS/PCI/EBUS/ISA DMA handling.

Fully unify all of the DMA ops so that subordinate bus types to
the DMA operation providers (such as ebus, isa, of_device) can
work transparently.

Basically, we just make sure that for every system device we
create, the dev->archdata 'iommu' and 'stc' fields are filled
in.

Then we have two platform variants of the DMA ops, one for SUN4U which
actually programs the real hardware, and one for SUN4V which makes
hypervisor calls.

This also fixes the crashes in parport_pc on sparc64, reported by
Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[VIDEO]: Fix OOPS in all SBUS framebuffer drivers.
David S. Miller [Sat, 28 Jul 2007 05:31:46 +0000 (22:31 -0700)]
[VIDEO]: Fix OOPS in all SBUS framebuffer drivers.

All of these drivers use a silly:

struct all_info {
struct fb_info info;
struct foo_par par;
};

struct all_info *all = kzalloc(sizeof(*all), GFP_KERNEL);
all->info.par = &all->par;

etc. etc. code sequence, basically replicating the provided
framebuffer_alloc()/framebuffer_release(), and doing it badly.

Not only is this massive code duplication, it also caused a
bug in that we weren't setting the fb_info->device pointer
which results in an OOPS when fb_is_primary_device() runs.

Fix all of this by using framebuffer_{alloc,release}() and
passing in "&of_device->dev" as the device pointer.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Handle mostek clock type in mini_rtc driver.
David S. Miller [Fri, 27 Jul 2007 21:40:27 +0000 (14:40 -0700)]
[SPARC64]: Handle mostek clock type in mini_rtc driver.

Now that drivers/sbus/char/rtc.c is sparc32 only, we need this.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[PARTITION]: Sun/Solaris VTOC table corrections
Mark Fortescue [Thu, 26 Jul 2007 07:17:22 +0000 (00:17 -0700)]
[PARTITION]: Sun/Solaris VTOC table corrections

Start doing VTOC validation before using its contents.
The validation is adjusted so as not to break existing setups
that do not set the VTOC version, sanity and partition count entries.
VTOC tables with more than 8 partitions will NOT be used.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC]: Fix floppy on some sun4c systems.
Mark Fortescue [Thu, 26 Jul 2007 06:45:10 +0000 (23:45 -0700)]
[SPARC]: Fix floppy on some sun4c systems.

Add in code to support an 82077 FDC on sun4c systems. There is a
problem with spurious interrupts but it does apear to work.

Testing on my SS2 (82072A FDC) shows that the floppy driver is not
100% with sun4c any way (any spurious interrupt kills it, requiring a
reboot to recover).

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Fix sun4u PCI config space accesses on sun4u.
David S. Miller [Thu, 26 Jul 2007 06:30:16 +0000 (23:30 -0700)]
[SPARC64]: Fix sun4u PCI config space accesses on sun4u.

Don't provide fake PCI config space for sun4u.

Also, put back the funny host controller space handling that
at least Sabre needs.  You have to read PCI host controller
registers at their nature size otherwise you get zeros instead
of correct values.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[PARTITION] MSDOS: Fix Sun num_partitions handling.
Mark Fortescue [Thu, 26 Jul 2007 01:30:08 +0000 (18:30 -0700)]
[PARTITION] MSDOS: Fix Sun num_partitions handling.

Correct the Solaris x86 number of partitions (slices) is a way that is
backward compatible with the earlier size.

This works without a new VTOC structure definition as the timestamp
and v_asciilabel fields in the VTOC are not used by the kernel yet.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC]: Update defconfig.
David S. Miller [Wed, 25 Jul 2007 23:51:20 +0000 (16:51 -0700)]
[SPARC]: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMake lguest compile with CONFIG_BLOCK=n and CONFIG_NET=n
Rusty Russell [Mon, 30 Jul 2007 00:25:22 +0000 (10:25 +1000)]
Make lguest compile with CONFIG_BLOCK=n and CONFIG_NET=n

Gabriel C reports lguest doesn't compile with CONFIG_BLOCK=n.  Fix this
by introducing a config var for the block device, which depends on
LGUEST && BLOCK.  Do the same for the net driver, rather then depending
gratuitously on CONFIG_NET.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Mon, 30 Jul 2007 00:22:03 +0000 (17:22 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (28 commits)
  [SCSI] mpt fusion: Changes in mptctl.c for logging support
  [SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support
  [SCSI] mpt fusion: Changes in mptscsih.c for logging support
  [SCSI] mpt fusion: Changes in mptbase.c for logging support
  [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h
  [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()
  [SCSI] bsg: Fix build for CONFIG_BLOCK=n
  [SCSI] aacraid: fix Sunrise Lake reset handling
  [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking
  [SCSI] add easyRAID to the no report luns blacklist
  [SCSI] advansys: lindent and other large, uninteresting changes
  [SCSI] aic79xx, aic7xxx: Fix incorrect width setting
  [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes
  [SCSI] aacraid: draw line in sand, sundry cleanup and version update
  [SCSI] iscsi_tcp: Turn off bounce buffers
  [SCSI] libiscsi: fix cmd seqeunce number checking
  [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template
  [SCSI] libiscsi: make sure session is not blocked when removing host
  [SCSI] libsas: Remove PCI dependencies
  [SCSI] simscsi: convert to use the data buffer accessors
  ...

17 years agoRemove fs.h from mm.h
Alexey Dobriyan [Sun, 29 Jul 2007 22:36:13 +0000 (02:36 +0400)]
Remove fs.h from mm.h

Remove fs.h from mm.h. For this,
 1) Uninline vma_wants_writenotify(). It's pretty huge anyway.
 2) Add back fs.h or less bloated headers (err.h) to files that need it.

As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files
rebuilt down to 3444 (-12.3%).

Cross-compile tested without regressions on my two usual configs and (sigh):

alpha              arm-mx1ads        mips-bigsur          powerpc-ebony
alpha-allnoconfig  arm-neponset      mips-capcella        powerpc-g5
alpha-defconfig    arm-netwinder     mips-cobalt          powerpc-holly
alpha-up           arm-netx          mips-db1000          powerpc-iseries
arm                arm-ns9xxx        mips-db1100          powerpc-linkstation
arm-assabet        arm-omap_h2_1610  mips-db1200          powerpc-lite5200
arm-at91rm9200dk   arm-onearm        mips-db1500          powerpc-maple
arm-at91rm9200ek   arm-picotux200    mips-db1550          powerpc-mpc7448_hpc2
arm-at91sam9260ek  arm-pleb          mips-ddb5477         powerpc-mpc8272_ads
arm-at91sam9261ek  arm-pnx4008       mips-decstation      powerpc-mpc8313_rdb
arm-at91sam9263ek  arm-pxa255-idp    mips-e55             powerpc-mpc832x_mds
arm-at91sam9rlek   arm-realview      mips-emma2rh         powerpc-mpc832x_rdb
arm-ateb9200       arm-realview-smp  mips-excite          powerpc-mpc834x_itx
arm-badge4         arm-rpc           mips-fulong          powerpc-mpc834x_itxgp
arm-carmeva        arm-s3c2410       mips-ip22            powerpc-mpc834x_mds
arm-cerfcube       arm-shannon       mips-ip27            powerpc-mpc836x_mds
arm-clps7500       arm-shark         mips-ip32            powerpc-mpc8540_ads
arm-collie         arm-simpad        mips-jazz            powerpc-mpc8544_ds
arm-corgi          arm-spitz         mips-jmr3927         powerpc-mpc8560_ads
arm-csb337         arm-trizeps4      mips-malta           powerpc-mpc8568mds
arm-csb637         arm-versatile     mips-mipssim         powerpc-mpc85xx_cds
arm-ebsa110        i386              mips-mpc30x          powerpc-mpc8641_hpcn
arm-edb7211        i386-allnoconfig  mips-msp71xx         powerpc-mpc866_ads
arm-em_x270        i386-defconfig    mips-ocelot          powerpc-mpc885_ads
arm-ep93xx         i386-up           mips-pb1100          powerpc-pasemi
arm-footbridge     ia64              mips-pb1500          powerpc-pmac32
arm-fortunet       ia64-allnoconfig  mips-pb1550          powerpc-ppc64
arm-h3600          ia64-bigsur       mips-pnx8550-jbs     powerpc-prpmc2800
arm-h7201          ia64-defconfig    mips-pnx8550-stb810  powerpc-ps3
arm-h7202          ia64-gensparse    mips-qemu            powerpc-pseries
arm-hackkit        ia64-sim          mips-rbhma4200       powerpc-up
arm-integrator     ia64-sn2          mips-rbhma4500       s390
arm-iop13xx        ia64-tiger        mips-rm200           s390-allnoconfig
arm-iop32x         ia64-up           mips-sb1250-swarm    s390-defconfig
arm-iop33x         ia64-zx1          mips-sead            s390-up
arm-ixp2000        m68k              mips-tb0219          sparc
arm-ixp23xx        m68k-amiga        mips-tb0226          sparc-allnoconfig
arm-ixp4xx         m68k-apollo       mips-tb0287          sparc-defconfig
arm-jornada720     m68k-atari        mips-workpad         sparc-up
arm-kafa           m68k-bvme6000     mips-wrppmc          sparc64
arm-kb9202         m68k-hp300        mips-yosemite        sparc64-allnoconfig
arm-ks8695         m68k-mac          parisc               sparc64-defconfig
arm-lart           m68k-mvme147      parisc-allnoconfig   sparc64-up
arm-lpd270         m68k-mvme16x      parisc-defconfig     um-x86_64
arm-lpd7a400       m68k-q40          parisc-up            x86_64
arm-lpd7a404       m68k-sun3         powerpc              x86_64-allnoconfig
arm-lubbock        m68k-sun3x        powerpc-cell         x86_64-defconfig
arm-lusl7200       mips              powerpc-celleb       x86_64-up
arm-mainstone      mips-atlas        powerpc-chrp32

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoACPI: restore CONFIG_ACPI_SLEEP
Len Brown [Sat, 28 Jul 2007 07:33:16 +0000 (03:33 -0400)]
ACPI: restore CONFIG_ACPI_SLEEP

Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the
new CONFIG_PM_SLEEP option.

Signed-off-by: Len Brown <len.brown@intel.com>
[ Modified to work with the PM config setup changes. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoIntroduce CONFIG_SUSPEND for suspend-to-Ram and standby
Rafael J. Wysocki [Sun, 29 Jul 2007 21:27:18 +0000 (23:27 +0200)]
Introduce CONFIG_SUSPEND for suspend-to-Ram and standby

Introduce CONFIG_SUSPEND representing the ability to enter system sleep
states, such as the ACPI S3 state, and allow the user to choose SUSPEND
and HIBERNATION independently of each other.

Make HOTPLUG_CPU be selected automatically if SUSPEND or HIBERNATION has
been chosen and the kernel is intended for SMP systems.

Also, introduce CONFIG_PM_SLEEP which is automatically selected if
CONFIG_SUSPEND or CONFIG_HIBERNATION is set and use it to select the
code needed for both suspend and hibernation.

The top-level power management headers and the ACPI code related to
suspend and hibernation are modified to use the new definitions (the
changes in drivers/acpi/sleep/main.c are, mostly, moving code to reduce
the number of ifdefs).

There are many other files in which CONFIG_PM can be replaced with
CONFIG_PM_SLEEP or even with CONFIG_SUSPEND, but they can be updated in
the future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoReplace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION
Rafael J. Wysocki [Sun, 29 Jul 2007 21:24:36 +0000 (23:24 +0200)]
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION

Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoProvide timespec to guests rather than jiffies clock.
Rusty Russell [Fri, 27 Jul 2007 03:42:52 +0000 (13:42 +1000)]
Provide timespec to guests rather than jiffies clock.

A non-periodic clock_event_device and the "jiffies" clock don't mix well:
tick_handle_periodic() can go into an infinite loop.

Currently lguest guests use the jiffies clock when the TSC is
unusable.  Instead, make the Host write the current time into the lguest
page on every interrupt.  This doesn't cost much but is more precise
and at least as accurate as the jiffies clock.  It also gets rid of
the GET_WALLCLOCK hypercall.

Also, delay setting sched_clock until our clock is set up, otherwise
the early printk timestamps can go backwards (not harmful, just ugly).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoFix lguest bzImage loading with CONFIG_RELOCATABLE=y
Rusty Russell [Fri, 27 Jul 2007 03:35:43 +0000 (13:35 +1000)]
Fix lguest bzImage loading with CONFIG_RELOCATABLE=y

Jason Yeh sent his crashing .config: bzImages made with
CONFIG_RELOCATABLE=y put the relocs where the BSS is expected, and we
crash with unusual results such as:

lguest: unhandled trap 14 at 0xc0122ae1 (0xa9)

Relying on BSS being zero was merely laziness on my part, and
unfortunately, lguest doesn't go through the normal startup path (which
does this in asm).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agom68knommu: remove crap from machdep.h
Greg Ungerer [Fri, 27 Jul 2007 00:38:16 +0000 (10:38 +1000)]
m68knommu: remove crap from machdep.h

Removed unused dead crap from machdep.h header.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agom68knommu: fix declaration of mach_sched_init
Greg Ungerer [Fri, 27 Jul 2007 00:38:01 +0000 (10:38 +1000)]
m68knommu: fix declaration of mach_sched_init

Make declaration of mach_sched_init match definition
(which is in arch/m68knommu/kernel/setup.c).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoFix procfs compat_ioctl regression
David Miller [Sat, 28 Jul 2007 05:58:37 +0000 (22:58 -0700)]
Fix procfs compat_ioctl regression

It is important to only provide the compat_ioctl method
if the downstream de->proc_fops does too, otherwise this
utterly confuses the logic in fs/compat_ioctl.c and we
end up doing the wrong thing.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoaudit: fix two bugs in the new execve audit code
Peter Zijlstra [Fri, 27 Jul 2007 22:55:18 +0000 (00:55 +0200)]
audit: fix two bugs in the new execve audit code

copy_from_user() returns the number of bytes not copied, hence 0 is the
expected output.

axi->mm might not be valid anymore when not equal to current->mm, do not
dereference before checking that - thanks to Al for spotting that.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agorip some includes from linux/interrupt.h
Al Viro [Fri, 27 Jul 2007 13:24:33 +0000 (14:24 +0100)]
rip some includes from linux/interrupt.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofix preprocessor idiocy in reiserfs
Al Viro [Fri, 27 Jul 2007 13:23:44 +0000 (14:23 +0100)]
fix preprocessor idiocy in reiserfs

#x blocks expansion of macro argument, but it won't do you any
good if it's already been expanded...  As it is, RFALSE(cond, ....)
ended up with stringified _expanded_ cond.  Real fun when cond contains
something like le32_to_cpu() and you are on a big-endian box...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agomore include order horrors
Al Viro [Fri, 27 Jul 2007 13:19:52 +0000 (14:19 +0100)]
more include order horrors

... because somebody had added preempt.h -> list.h, resulting in
asm/system.h -> hardirq.h -> preempt.h -> list.h -> asm/system.h on m68k,
with smp_wmb() used in list.h and defined in asm/system.h below the include
of hardirq.h.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Sun, 29 Jul 2007 02:33:23 +0000 (19:33 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] Fix sclp_vt220 error handling.
  [S390] cio: Reorganize initialization.
  [S390] cio: Make CIO_* macros safe if dbfs are not available.
  [S390] cio: Clean up messages.
  [S390] Fix IRQ tracing.
  [S390] vmur: fix diag14_read.
  [S390] Wire up sys_fallocate.
  [S390] add types.h include to s390_ext.h
  [S390] cio: Remove deprecated rdc/rcd.
  [S390] Get rid of new section mismatch warnings.
  [S390] sclp: kill unused SCLP config option.
  [S390] cio: Remove remains of _ccw_device_get_device_number().
  [S390] cio: css_sch_device_register() can be made static.
  [S390] Improve __smp_call_function_map.
  [S390] Convert to smp_call_function_single.

17 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Sun, 29 Jul 2007 02:33:04 +0000 (19:33 -0700)]
Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected
  Blackfin arch: add BF54x I2C/TWI TWI0 driver support
  Blackfin On-Chip RTC driver update for supporting BF54x
  Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)
  Blackfin arch: add error message when IRQ no available
  Blackfin arch: Initialize the exception vectors early in the boot process
  Blackfin arch: fix a compiling warning about dma-mapping
  Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere
  Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail.
  Blackfin arch: Load P0 before storing through it
  Blackfin arch: fix KGDB bug, dont forget last parameter.
  Blackfin arch: add selections for BF544 and BF542
  Blackfin arch: use bfin_read_SWRST() now that BF561 provides it
  Blackfin arch: setup aliases for some core Core A MMRs

17 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sun, 29 Jul 2007 02:31:13 +0000 (19:31 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  docbook: add pipes, other fixes
  blktrace: use cpu_clock() instead of sched_clock()
  bsg: Fix build for CONFIG_BLOCK=n
  [patch] QUEUE_FLAG_READFULL QUEUE_FLAG_WRITEFULL comment fix

17 years agoMerge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Sun, 29 Jul 2007 02:30:24 +0000 (19:30 -0700)]
Merge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp: AMD AGP is used on UP1100 & UP1500 alpha boxen
  intel_agp: really fix 945/965GME
  agp: don't lock pages
  AGP: document boot options
  Fix "use after free" / "double free" bug in ati_create_gatt_pages / ati_free_gatt_pages

17 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 29 Jul 2007 02:29:37 +0000 (19:29 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4527/1: pxa: fix pxa27x ac97 cold reset in ASoC due to CKEN change
  [ARM] 4530/1: MXC: fix elf_hwcap compile breakage as in iop13xx
  [ARM] 4529/1: [HP Jornada 7XX] - Fix jornada720.c to use SSP driver
  [ARM] 4528/1: [HP Jornada 7XX] - Fix typo in jornada720_ssp.c
  [ARM] Remove CONFIG_IGNORE_FIQ
  [ARM] 4526/1: pxa: make ARCH_PXA select GENERIC_CLOCKEVENTS
  [ARM] setup_profiling_timer must not be __init

17 years ago[ARM] 4527/1: pxa: fix pxa27x ac97 cold reset in ASoC due to CKEN change
Eric Miao [Thu, 26 Jul 2007 01:01:04 +0000 (02:01 +0100)]
[ARM] 4527/1: pxa: fix pxa27x ac97 cold reset in ASoC due to CKEN change

due to CKEN_xxx definition and pxa_set_cken() change,  the pxa27x
ac97 cold reset is broken in ASoC, fixed to use bit index instead
of bit mask

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
17 years ago[ARM] 4530/1: MXC: fix elf_hwcap compile breakage as in iop13xx
Quinn Jensen [Fri, 27 Jul 2007 22:30:55 +0000 (23:30 +0100)]
[ARM] 4530/1: MXC: fix elf_hwcap compile breakage as in iop13xx

MXC needs the same change as IOP.  See [ARM] 4494/1
or commit 7dea1b20066cd30fb54da7e686b16b5e38b46b2d

An undefined reference to elf_hwcap prevents linkage, due
to changes made by f884b1cf578e079f01682514ae1ae64c74586602
and d1cbbd6b413510c6512f4f80ffd48db1a8dd554a

Removing processor.h removes the extern definition of
elf_hwcap, which fixes the link issue, but forgets cpu_relax().
So, instead, we'll call barrier() directly.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ross Wille <wille@freescale.com>
Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
17 years ago[ARM] 4529/1: [HP Jornada 7XX] - Fix jornada720.c to use SSP driver
Kristoffer Ericson [Thu, 26 Jul 2007 06:46:17 +0000 (07:46 +0100)]
[ARM] 4529/1: [HP Jornada 7XX] - Fix jornada720.c to use SSP driver

This fixes the jornada720.c file :

* ifdef for CONFIG_SA1100_JORNADA720_SSP since we dont want to include anything not selected in menyconfig.
* add documentation for init for future reference
* change platform driver name from jornada720_mcu ->
jornada_ssp.
* change maintainer in file.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
17 years ago[SCSI] mpt fusion: Changes in mptctl.c for logging support
Prakash, Sathya [Tue, 24 Jul 2007 10:19:05 +0000 (15:49 +0530)]
[SCSI] mpt fusion: Changes in mptctl.c for logging support

This patch contains changes in mptctl.c to support logging in MPT fusion drivers

The changes are majorly in debug printks, the existing debugprintk are
modified accroding to new debug macros defined in the file mptbdebug.h

signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging...
Prakash, Sathya [Tue, 24 Jul 2007 10:17:41 +0000 (15:47 +0530)]
[SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support

This patch contains changes in mptfc.c, mptlan.c, mptsas.c and mptspi.c to
support logging in MPT fusion drivers.

The changes are majorly in debug printks, the existing debugprintk are
modified accroding to new debug macros defined in the file mptbdebug.h

signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] mpt fusion: Changes in mptscsih.c for logging support
Prakash, Sathya [Wed, 25 Jul 2007 05:44:01 +0000 (11:14 +0530)]
[SCSI] mpt fusion: Changes in mptscsih.c for logging support

This patch contains changes in mptscsih.c to support logging in MPT fusion
drivers.

The changes are majorly in debug printks, the existing debugprintk are
modified accroding to new debug macros defined in the file mptbdebug.h

A new sysfs attribute is added to retrieve and modify the debug level.

signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] mpt fusion: Changes in mptbase.c for logging support
Prakash, Sathya [Tue, 24 Jul 2007 10:12:08 +0000 (15:42 +0530)]
[SCSI] mpt fusion: Changes in mptbase.c for logging support

This patch contains changes in mptbase.c to support logging in MPT fusion
drivers.

The changes are majorly in debug printks, the existing debugprintk are
modified accroding to new debug macros defined in the file mptbdebug.h

A new module parameter mpt_debug_level is added to pass the debug level as
module parameter.

signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of...
Prakash, Sathya [Tue, 24 Jul 2007 10:10:08 +0000 (15:40 +0530)]
[SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h

This patch adds a new file mptdebug.h in the fusion source directory,
which contains different debug macros.  The existing debug macros and
flags are removed from the mptbase.h and Makefile In Kconfig a new
configuration parameter FUSION_LOGGING is added to enable/disable the
logging support during compile time.

signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()
Jesper Juhl [Fri, 27 Jul 2007 23:13:33 +0000 (01:13 +0200)]
[SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()

In sas_smp_get_phy_events() we never test if the call to
alloc_smp_req(RPEL_REQ_SIZE) succeeds or fails. That means we run
the risk of dereferencing a NULL pointer if it does fail. Far
better to test if we got NULL back and in that case return -ENOMEM
just as we already do for the other memory allocation in that
function.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] bsg: Fix build for CONFIG_BLOCK=n
Paul Mundt [Sat, 28 Jul 2007 14:45:43 +0000 (23:45 +0900)]
[SCSI] bsg: Fix build for CONFIG_BLOCK=n

BLK_DEV_BSG was added outside of the if BLOCK check, which allows it to
be enabled when CONFIG_BLOCK=n. This leads to many screenlengths of
errors, starting with a parse error on the request_queue_t definition.
Obviously this wasn't intended for CONFIG_BLOCK=n usage, so just move the
option back in to the block.

Caught with a randconfig on sh.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aacraid: fix Sunrise Lake reset handling
Salyzyn, Mark [Fri, 27 Jul 2007 14:29:26 +0000 (10:29 -0400)]
[SCSI] aacraid: fix Sunrise Lake reset handling

The patch is *much* smaller than the description. I am attempting to
answer to those that want to understand an issue that was reported in
May this year.

If a Sunrise Lake based card that requires an alternate reset mechanism
is set up to ignore the commanded IOP_RESET it reports 0x00000010
(IOP_RESET ignored) instead of 0x3803000F (use alternate reset mechanism
to reset all cores), and thus the reset platform function decides to
switch to IOP_RESET_ALWAYS because the reset platform function
parameters indicate that we *need* to reset the card. IOP_RESET_ALWAYS
then responds with the 0x3803000F return code, but alas we treat this as
an error instead of using the alternate reset mechanism (put a 0x03 into
the register offset 0x38). The reset fails, but the fact that the
IOP_RESET_ALWAYS command was issued has put the card in a purposeful
shutdown state in preparation for the alternate hardware reset to be
applied. Yuck.

IOP_RESET is ignored in internal production cards, typically to ensure
that we catch all adapter lockup issues without the driver progressing
further, so this would not appear to be a field issue and thus this
patch was destined to be only in the internal Adaptec source tree.
IOP_RESET_ALWAYS is reserved for
kexec/kdump/FirmwareUpdate/AutomatedTestFrames so we did not function as
expected in any case. Also in the past we have had OEMs specifically
request that cards not be resetable after a BlinkLED/FirmwareAssert for
one reason or another and To head off the possibility that the Sunrise
Lake based cards would suffer a similar fate, we propose the enclosed
fix.

Yinghai Lu of SUN had a pre-production card with IOP_RESET disabled when
he reported an issue to the linux kernel list back in May regarding a
kexec problem resulting from this reset being ignore. His fix was to
update the Firmware to one that did not ignore the IOP_RESET. Previous
kernels did not attempt to reset the adapter and that is why it surfaced
as a regression in his hands.

The current list of aacraid based cards that use Sunrise Lake:

9005:0285:9005:02b5     Adaptec 5445
9005:0285:9005:02b6     Adaptec 5805
9005:0285:9005:02b7     Adaptec 5085
9005:0285:9005:02c3     Adaptec 51205
9005:0285:9005:02c4     Adaptec 51605
9005:0285:9005:02ce     Adaptec 51245
9005:0285:9005:02cf     Adaptec 51645
9005:0285:9005:02d0     Adaptec 52445
9005:0285:9005:02d1     Adaptec 5405
9005:0285:9005:02b8     ICP     ICP5445SL
9005:0285:9005:02b9     ICP     ICP5085SL
9005:0285:9005:02ba     ICP     ICP5805SL
9005:0285:9005:02c5     ICP     ICP5125SL
9005:0285:9005:02c6     ICP     ICP5165SL
9005:0285:108e:7aac     SUN     STK RAID REM
9005:0285:108e:0286     SUN     STK RAID INT
9005:0285:108e:0287     SUN     STK RAID EXT
9005:0285:108e:7aae     SUN     STK RAID EM

All of these are publicly released with IOP_RESET enabled. So there is
no immediate need for this patch.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking
Salyzyn, Mark [Fri, 27 Jul 2007 13:48:49 +0000 (09:48 -0400)]
[SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking

Customer running an application that issues SYNCHRONIZE_CACHE calls
directly noticed the broad stroke of the current implementation in the
aacraid driver resulting in multiple applications feeding I/O to the
storage causing the issuing application to stall for long periods of
time. By only waiting for the current WRITE commands, rather than all
commands, to complete; and those that are in range of the
SYNCHRONIZE_CACHE call that would associate more tightly with the
issuing application before telling the Firmware to flush it's dirty
cache, we managed to reduce the stalling. The Firmware itself still
flushes all the dirty cache associated with the array ignoring the
range, it just does so in a more timely manner.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] add easyRAID to the no report luns blacklist
akpm@linux-foundation.org [Fri, 27 Jul 2007 20:30:02 +0000 (13:30 -0700)]
[SCSI] add easyRAID to the no report luns blacklist

According to http://bugzilla.kernel.org/show_bug.cgi?id=5953, the
easyRAID returns rubbish to REPORT LUNS.

Cc: Natalie Protasevich <protasnb@gmail.com>
Cc: Hans-Christian Armingeon <mog.johnny@gmx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[IA64] Compare pointer against NULL, not '0'
Yoann Padioleau [Fri, 27 Jul 2007 09:44:42 +0000 (11:44 +0200)]
[IA64] Compare pointer against NULL, not '0'

When comparing a pointer, it's clearer to compare it to NULL than to 0.

Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] Fix build failure in fs/quota.c
Tony Luck [Fri, 27 Jul 2007 22:35:43 +0000 (15:35 -0700)]
[IA64] Fix build failure in fs/quota.c

b716395e2b8e450e294537de0c91476ded2f0395 added code to handle
a compatability issue with 32bit quota tools, but the new compat
routines are only needed when CONFIG_COMPAT=y (and with this set
to 'n' there are compilation problems since some new typedefs are
not visible).

Reported by Doug Chapman.  Fix tuned by a cast of thousands (Andi,
Andreas, Arthur, HPA, Willy)

Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] Use new acpi_device_id struct for HID init in ia64/hp/common/sba_iommu.c
Thomas Renninger [Fri, 27 Jul 2007 22:38:31 +0000 (15:38 -0700)]
[IA64] Use new acpi_device_id struct for HID init in ia64/hp/common/sba_iommu.c

Forgot to adjust this one with the acpi autoloading patches
in commit 8c8eb78f673c07b60f31751e1e47ac367c60c6b7

Acked-by: Myron Stowe <myron.stowe@hp.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[SCSI] advansys: lindent and other large, uninteresting changes
Matthew Wilcox [Thu, 26 Jul 2007 14:56:23 +0000 (10:56 -0400)]
[SCSI] advansys: lindent and other large, uninteresting changes

 - Run Lindent
 - Move advansys_detect and advansys_release to the end of the file
 - Split advansys_board_found out of advansys_detect
 - Rename a few variables, such as shp to shost and pci_devp to pdev
 - Turn STATIC into static

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aic79xx, aic7xxx: Fix incorrect width setting
James Bottomley [Thu, 26 Jul 2007 21:13:10 +0000 (17:13 -0400)]
[SCSI] aic79xx, aic7xxx: Fix incorrect width setting

Wide transfers are required for every setting of PPR apart from QAS.
It seems the DV code starts at the minimum, which turns on DT and Wide
regardless of the setting of max_width.  Redo the PPR and period
setting routines to respect max_width (i.e. start at period = 10 if it
is zero).

This fixes bugzilla 8366

Acked-by: "Freels, James D." <freelsjd@ornl.gov>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes
Seokmann Ju [Thu, 26 Jul 2007 20:43:34 +0000 (13:43 -0700)]
[SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes

This is a patch to fix 'segmentation fault' issue which was initiated
by Richard Lary <rlary@us.ibm.com>.  Thanks again Richard.

- on following sysfs attritute function, changes have made so that both
  count and offset input parameters are honored by the functions.
    = qla2x00_sysfs_read_nvram()
    = qla2x00_sysfs_read_vpd()
- made changes so that NVRAM data to be cached to minimize H/W accesses
  during agent querying of the driver's.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aacraid: draw line in sand, sundry cleanup and version update
Salyzyn, Mark [Thu, 26 Jul 2007 18:20:02 +0000 (14:20 -0400)]
[SCSI] aacraid: draw line in sand, sundry cleanup and version update

Minor unimportant cuttings from the floor bundled in with a version
stamp update. Only controversial change is the dropping of Alan Cox
copyright on the nark.c module since that file has no code written by
him in it.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] iscsi_tcp: Turn off bounce buffers
Mike Christie [Thu, 26 Jul 2007 17:46:47 +0000 (12:46 -0500)]
[SCSI] iscsi_tcp: Turn off bounce buffers

It was found by LSI that on setups with large amounts of memory
we were bouncing buffers when we did not need to. If the iscsi tcp
code touches the data buffer (or a helper does),
it will kmap the buffer. iscsi_tcp also does not interact with hardware,
so it does not have any hw dma restrictions. This patch sets the bounce
buffer settings for our device queue so buffers should not be bounced
because of a driver limit.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] libiscsi: fix cmd seqeunce number checking
Mike Christie [Thu, 26 Jul 2007 17:46:48 +0000 (12:46 -0500)]
[SCSI] libiscsi: fix cmd seqeunce number checking

We should not be checking the cmd windown for just handling r2t responses.
And if the window closes in on us, always have scsi-ml requeue the command
from our queuecommand function.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template
Mike Christie [Thu, 26 Jul 2007 17:46:46 +0000 (12:46 -0500)]
[SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template

This prevents the iscsi modules from being unloaded while
there are active mounts from an iscsi target.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] libiscsi: make sure session is not blocked when removing host
Mike Christie [Thu, 26 Jul 2007 17:46:45 +0000 (12:46 -0500)]
[SCSI] libiscsi: make sure session is not blocked when removing host

When we logout we block the session since we are not taking any more
commands, but when we call remove host we want to make sure any
IO that got queued up and blocked gets failed upwards quickly, so
we unblock the session and fail it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[S390] Fix sclp_vt220 error handling.
Heiko Carstens [Fri, 27 Jul 2007 10:29:22 +0000 (12:29 +0200)]
[S390] Fix sclp_vt220 error handling.

Also convert to slab_is_available() as an indicator if
get_zeroed_page() will work or not.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] cio: Reorganize initialization.
Cornelia Huck [Fri, 27 Jul 2007 10:29:21 +0000 (12:29 +0200)]
[S390] cio: Reorganize initialization.

- Localize more of the init calls in init_channel_subsystem().
- Print a warning if init_channel_subsystem() failed.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] cio: Make CIO_* macros safe if dbfs are not available.
Cornelia Huck [Fri, 27 Jul 2007 10:29:20 +0000 (12:29 +0200)]
[S390] cio: Make CIO_* macros safe if dbfs are not available.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] cio: Clean up messages.
Cornelia Huck [Fri, 27 Jul 2007 10:29:19 +0000 (12:29 +0200)]
[S390] cio: Clean up messages.

- Remove unneeded messages.
- Move some messages into the debug feature.
- Use dev_* where appropriate.
- Use "cio: " prefix consistently.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Fix IRQ tracing.
Heiko Carstens [Fri, 27 Jul 2007 10:29:18 +0000 (12:29 +0200)]
[S390] Fix IRQ tracing.

If a machine check is pending and the external or I/O interrupt handler
returns to userspace io_mcck_pending is going to call s390_handle_mcck.
Before this happens a call to TRACE_IRQS_ON was already made since we
know that we are going back to userspace and hence interrupts will be
enabled. So there was an indication that interrupts are enabled while
in reality they are still disabled.
s390_handle_mcck will do a local_irq_save/restore pair and confuse
lockdep which later complains about inconsistent irq tracing.
To solve this just call trace_hardirqs_off before calling
s390_handle_mcck and trace_hardirqs_on afterwards.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] vmur: fix diag14_read.
Frank Munzert [Fri, 27 Jul 2007 10:29:17 +0000 (12:29 +0200)]
[S390] vmur: fix diag14_read.

Record length of spool file must be only stored in 1st SPLINK record

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Wire up sys_fallocate.
Martin Schwidefsky [Fri, 27 Jul 2007 10:29:16 +0000 (12:29 +0200)]
[S390] Wire up sys_fallocate.

This patch implements support of fallocate system call on s390(x)
platform.  A wrapper is added to address the issue which s390 ABI has with
the arguments of this system call.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] add types.h include to s390_ext.h
Christian Borntraeger [Fri, 27 Jul 2007 10:29:15 +0000 (12:29 +0200)]
[S390] add types.h include to s390_ext.h

The header file for external interrupts uses the _u16 type. Make sure
that _u16 is defined by including linux/types.h. This prevents compile
failures, if asm/s390_ext.h is the first include file.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] cio: Remove deprecated rdc/rcd.
Cornelia Huck [Fri, 27 Jul 2007 10:29:14 +0000 (12:29 +0200)]
[S390] cio: Remove deprecated rdc/rcd.

http://marc.info/?l=linux-kernel&m=118481061928246&w=2 seems to
indicate disfavour of "deprecated", so let's just kill it now.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Get rid of new section mismatch warnings.
Heiko Carstens [Fri, 27 Jul 2007 10:29:13 +0000 (12:29 +0200)]
[S390] Get rid of new section mismatch warnings.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] sclp: kill unused SCLP config option.
Heiko Carstens [Fri, 27 Jul 2007 10:29:12 +0000 (12:29 +0200)]
[S390] sclp: kill unused SCLP config option.

sclp is always compiled in.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] cio: Remove remains of _ccw_device_get_device_number().
Cornelia Huck [Fri, 27 Jul 2007 10:29:11 +0000 (12:29 +0200)]
[S390] cio: Remove remains of _ccw_device_get_device_number().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] cio: css_sch_device_register() can be made static.
Cornelia Huck [Fri, 27 Jul 2007 10:29:10 +0000 (12:29 +0200)]
[S390] cio: css_sch_device_register() can be made static.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Improve __smp_call_function_map.
Heiko Carstens [Fri, 27 Jul 2007 10:29:09 +0000 (12:29 +0200)]
[S390] Improve __smp_call_function_map.

There is no need to disable bottom halves when holding call_lock. Also
this could imply that it is legal to call smp_call_function* from
bh context, which it is not.
Also test if func will be executed locally before disabling
and aterwards enabling interrupts again. It's not necessary to disable
and enable interrupts each time __smp_call_function_map gets called.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Convert to smp_call_function_single.
Heiko Carstens [Fri, 27 Jul 2007 10:29:08 +0000 (12:29 +0200)]
[S390] Convert to smp_call_function_single.

smp_call_function_single now has the same semantics as s390's
smp_call_function_on. Therefore convert to the *single variant
and get rid of some architecture specific code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years agodocbook: add pipes, other fixes
Randy Dunlap [Fri, 27 Jul 2007 06:08:51 +0000 (08:08 +0200)]
docbook: add pipes, other fixes

Fix some typos in pipe.c and splice.c.
Add pipes API to kernel-api.tmpl.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agoblktrace: use cpu_clock() instead of sched_clock()
Ingo Molnar [Wed, 25 Jul 2007 11:07:10 +0000 (13:07 +0200)]
blktrace: use cpu_clock() instead of sched_clock()

use cpu_clock() instead of sched_clock(). (the latter is not a proper
clock-source)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agobsg: Fix build for CONFIG_BLOCK=n
Paul Mundt [Wed, 25 Jul 2007 08:02:30 +0000 (10:02 +0200)]
bsg: Fix build for CONFIG_BLOCK=n

BLK_DEV_BSG was added outside of the if BLOCK check, which allows it to
be enabled when CONFIG_BLOCK=n. This leads to many screenlengths of
errors, starting with a parse error on the request_queue_t definition.
Obviously this wasn't intended for CONFIG_BLOCK=n usage, so just move the
option back in to the block.

Caught with a randconfig on sh.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
--

 block/Kconfig |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[patch] QUEUE_FLAG_READFULL QUEUE_FLAG_WRITEFULL comment fix
Qi Yong [Wed, 25 Jul 2007 06:45:51 +0000 (08:45 +0200)]
[patch] QUEUE_FLAG_READFULL QUEUE_FLAG_WRITEFULL comment fix

The two comments were transposed.

Signed-off-by: Qi Yong <qiyong@mail.fc-cn.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agoagp: AMD AGP is used on UP1100 & UP1500 alpha boxen
Alan Hourihane [Fri, 27 Jul 2007 00:56:43 +0000 (10:56 +1000)]
agp: AMD AGP is used on UP1100 & UP1500 alpha boxen

Signed-off-by: Dave Airlie <airlied@redhat.com>
17 years agointel_agp: really fix 945/965GME
Zhenyu Wang [Thu, 26 Jul 2007 01:18:09 +0000 (09:18 +0800)]
intel_agp: really fix 945/965GME

Fix some missing places to check with device id info, which
should probe the device gart correctly.

Signed-off-by: Wang Zhenyu <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
17 years agoagp: don't lock pages
Nick Piggin [Wed, 25 Jul 2007 11:19:22 +0000 (13:19 +0200)]
agp: don't lock pages

AGP should not need to lock pages. They are not protecting any race
because there is no lock_page calls, only SetPageLocked.

This is causing hangs with d00806b183152af6d24f46f0c33f14162ca1262a.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
17 years agoAGP: document boot options
Chuck Ebbert [Fri, 27 Jul 2007 00:46:20 +0000 (10:46 +1000)]
AGP: document boot options

Add documentation for AGP boot options.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
17 years agoFix "use after free" / "double free" bug in ati_create_gatt_pages / ati_free_gatt_pages
Jesper Juhl [Sat, 21 Jul 2007 15:39:11 +0000 (17:39 +0200)]
Fix "use after free" / "double free" bug in ati_create_gatt_pages / ati_free_gatt_pages

Hi,

Coverity spotted a "use after free" bug in
drivers/char/agp/ati-agp.c::ati_create_gatt_pages().

The same one that was in
  drivers/char/agp/amd-k7-agp.c::amd_create_gatt_pages()

The problem is this:
       If "entry = kzalloc(sizeof(struct ati_page_map), GFP_KERNEL);"
fails, then there's a loop in the function to free all entries
allocated so far and break out of the allocation loop. That in itself
is pretty sane, but then the (now freed) 'tables' is assigned to
ati_generic_private.gatt_pages and 'retval' is set to -ENOMEM which
causes ati_free_gatt_pages(); to be called at the end of the function.
The problem with this is that ati_free_gatt_pages() will then loop
'ati_generic_private.num_tables' times and try to free each entry in
tables[] - this is bad since tables has already been freed and
furthermore it will call kfree(tables) at the end - a double free.

This patch removes the freeing loop in ati_create_gatt_pages() and
instead relies entirely on the call to ati_free_gatt_pages() to free
everything we allocated in case of an error. It also sets
ati_generic_private.num_tables to the actual number of entries
allocated instead of just using the value passed in from the caller -
this ensures that ati_free_gatt_pages() will only attempt to free
stuff that was actually allocated.

Note: I'm in no way intimate with this code and I have no way to
actually test this patch (besides compile test it), so while I've
tried to be careful in reading the code and make sure the patch
does the right thing an ACK from someone who actually knows the
code in-depth would be very much appreciated.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
17 years ago[IA64] Fix wrong return value in parse_vector_domain
Kenji Kaneshige [Thu, 26 Jul 2007 06:32:38 +0000 (15:32 +0900)]
[IA64] Fix wrong return value in parse_vector_domain

Fix wrong return value in parse_vector_domain().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] Fix wrong assumption in acpi_gsi_to_irq
Kenji Kaneshige [Thu, 26 Jul 2007 06:31:34 +0000 (15:31 +0900)]
[IA64] Fix wrong assumption in acpi_gsi_to_irq

The ia64's acpi_gsi_to_irq() function assumes irq == vector. But in
fact irq can be different from vector. This patch fix this wrong
assumption.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] Add sanity check into __bind_irq_vector
Kenji Kaneshige [Thu, 26 Jul 2007 06:30:45 +0000 (15:30 +0900)]
[IA64] Add sanity check into __bind_irq_vector

Add some sanity checks into __bind_irq_vector().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Thu, 26 Jul 2007 21:00:56 +0000 (14:00 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  drivers/mmc/core/: make 3 functions static
  mmc: add missing printk levels
  mmc: remove redundant debug information from sdhci and wbsd
  mmc: proper debugging output in core
  mmc: be more verbose about card insertions/removal
  mmc: Don't hold lock when releasing an added card
  mmc: add a might_sleep() to mmc_claim_host()
  mmc: update kerneldoc
  mmc: update header file paths
  sdhci: add support to ENE-CB714
  mmc: check error bits before command completion

17 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Thu, 26 Jul 2007 21:00:09 +0000 (14:00 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (21 commits)
  [POWERPC] spusched: Fix initial timeslice calculation
  [POWERPC] spufs: Fix incorrect initialization of cbe_spu_info.spus
  [POWERPC] Fix Maple platform ISA bus
  [POWERPC] Make pci_iounmap actually unmap things
  [POWERPC] Add function to check if address is an IO port
  [POWERPC] Fix Pegasos keyboard detection
  [POWERPC] iSeries: Fix section mismatch warning in lpevents
  [POWERPC] iSeries: Fix section mismatch warnings
  [POWERPC] iSeries: We need vio_enable_interrupts
  [POWERPC] Fix RTC and device tree on linkstation machines
  [POWERPC] Add of_register_i2c_devices()
  [POWERPC] Fix loop with unsigned long counter variable
  [POWERPC] Fix register labels on show_regs() message for 4xx/Book-E
  [POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORM
  [POWERPC] Fix the ability to reset on MPC8544 DS and MPC8568 MDS boards
  [POWERPC] Fix mpc7448hpc2 tsi108 device_type bug
  [POWREPC] Fixup a number of modpost warnings on ppc32
  [POWERPC] Fix ethernet PHY support on MPC8544 DS
  [POWERPC] Don't try to allocate resources for a Freescale POWERPC PHB
  Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"
  ...

17 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Thu, 26 Jul 2007 20:59:59 +0000 (13:59 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  [PATCH] sched: debug feature - make the sched-domains tree runtime-tweakable
  [PATCH] sched: add above_background_load() function
  [PATCH] sched: update Documentation/sched-stats.txt
  [PATCH] sched: mark sysrq_sched_debug_show() static
  [PATCH] sched: make cpu_clock() not use the rq clock
  [PATCH] sched: remove unused rq->load_balance_class
  [PATCH] sched: arch preempt notifier mechanism
  [PATCH] sched: increase SCHED_LOAD_SCALE_FUZZ

17 years agoDon't force-enable suspend/hibernate support just for ACPI
Linus Torvalds [Thu, 26 Jul 2007 20:44:58 +0000 (13:44 -0700)]
Don't force-enable suspend/hibernate support just for ACPI

It's a totally independent decision for the user whether he wants
suspend and/or hibernation support, and ACPI shouldn't care.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoFix ThinkPad T42 poweroff failure introduced by by "PM: Introduce pm_power_off_prepare"
Rafael J. Wysocki [Thu, 26 Jul 2007 14:29:55 +0000 (16:29 +0200)]
Fix ThinkPad T42 poweroff failure introduced by by "PM: Introduce pm_power_off_prepare"

Commit bd804eba1c8597cbb7cd5a5f9fe886aae16a079a ("PM: Introduce
pm_power_off_prepare") caused problems in the poweroff path, as reported by
YOSHIFUJI Hideaki / 吉藤英明.

Generally, sysdev_shutdown() should be called after the ACPI preparation for
powering the system off.  To make it happen, we can separate sysdev_shutdown()
from device_shutdown() and call it directly wherever necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoRevert most of "x86: Fix alternatives and kprobes to remap write-protected kernel...
Linus Torvalds [Thu, 26 Jul 2007 19:07:21 +0000 (12:07 -0700)]
Revert most of "x86: Fix alternatives and kprobes to remap write-protected kernel text"

This reverts most of commit 19d36ccdc34f5ed444f8a6af0cbfdb6790eb1177.

The way to DEBUG_RODATA interactions with KPROBES and CPU hotplug is to
just not mark the text as being write-protected in the first place.
Both of those facilities depend on rewriting instructions.

Having "helpful" debug facilities that just cause more problem is not
being helpful.  It just adds complexity and bugs. Not worth it.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoPNP: fix up after Lindent
Bjorn Helgaas [Thu, 26 Jul 2007 17:41:21 +0000 (10:41 -0700)]
PNP: fix up after Lindent

These are manual fixups after running Lindent.  No functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoPNP: Lindent all source files
Bjorn Helgaas [Thu, 26 Jul 2007 17:41:20 +0000 (10:41 -0700)]
PNP: Lindent all source files

Run Lindent on all PNP source files.

Produced by:

    $ quilt new pnp-lindent
    $ find drivers/pnp -name \*.[ch] | xargs quilt add
    $ quilt add include/linux/{pnp.h,pnpbios.h}
    $ scripts/Lindent drivers/pnp/*.c drivers/pnp/*/*.c include/linux/pnp*.h
    $ quilt refresh --sort

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agox86_64: cleanup tsc.c merge artifact
Thomas Gleixner [Thu, 26 Jul 2007 17:41:19 +0000 (10:41 -0700)]
x86_64: cleanup tsc.c merge artifact

tsc_unstable is declared twice.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agom32r: Fix ei_tx_timeout() in drivers/net/lib8390.c
Hirokazu Takata [Thu, 26 Jul 2007 17:41:19 +0000 (10:41 -0700)]
m32r: Fix ei_tx_timeout() in drivers/net/lib8390.c

Change INT0 trigger mode from edge-sense mode to level-sense mode,
in order to fix the following timeout error:
  'NETDEV WATCHDOG: eth0: transmit timed out'.

This patch is required only for the Mappi platform.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Hitoshi Yamamoto <hitoshiy@linux-m32r.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoAllow nodes to exist that only contain ZONE_MOVABLE
Mel Gorman [Thu, 26 Jul 2007 17:41:18 +0000 (10:41 -0700)]
Allow nodes to exist that only contain ZONE_MOVABLE

With the introduction of kernelcore=, a configurable zone is created on
request.  In some cases, this value will be small enough that some nodes
contain only ZONE_MOVABLE.  On some NUMA configurations when this occurs,
arch-independent zone-sizing will get the size of the memory holes within
the node incorrect.  The value of present_pages goes negative and the boot
fails.

This patch fixes the bug in the calculation of the size of the hole.  The
test case is to boot test a NUMA machine with a low value of kernelcore=
before and after the patch is applied.  While this bug exists in early
kernel it cannot be triggered in practice.

This patch has been boot-tested on a variety machines with and without
kernelcore= set.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoChar: cyclades, select FW_LOADER
Jiri Slaby [Thu, 26 Jul 2007 17:41:17 +0000 (10:41 -0700)]
Char: cyclades, select FW_LOADER

Fix link errors below by selecting FW_LOADER
  LD      .tmp_vmlinux1
drivers/built-in.o: In function `cyz_load_fw':
drivers/char/cyclades.c:4908: undefined reference to `request_firmware'
drivers/char/cyclades.c:4979: undefined reference to `release_firmware'

Cc: <toralf.foerster@gmx.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agox86_64: fix section mismatch warnings in tce
Sam Ravnborg [Thu, 26 Jul 2007 17:41:16 +0000 (10:41 -0700)]
x86_64: fix section mismatch warnings in tce

Fix the following two section mismatch warnings:

WARNING: vmlinux.o(.text+0x1ce84): Section mismatch: reference to .init.text:free_bootmem (between 'free_tce_table' and 'build_tce_table')
WARNING: vmlinux.o(.text+0x1d04d): Section mismatch: reference to .init.text:__alloc_bootmem_low (between 'alloc_tce_table' and 'kretprobe_trampoline_holder')

In both cases the functions was used only from __init
context so mark them __init.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agodrivers/edac: fix pasemi kconfig depends
Doug Thompson [Thu, 26 Jul 2007 17:41:16 +0000 (10:41 -0700)]
drivers/edac: fix pasemi kconfig depends

Fixed 'depends on PPC_PASEMI' in EDAC Kconfig.  Module PASEMI depends ONLY on
the PASEMI on PPC.

Was previously enabled for ALL PPC

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Egor N. Martovetsky <egor@pasemi.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoinclude/asm-:mips add missing edac h file
Doug Thompson [Thu, 26 Jul 2007 17:41:15 +0000 (10:41 -0700)]
include/asm-:mips add missing edac h file

EDAC has a foundation to perform software memory scrubbing, but it requires a
per architecture (atomic_scrub) function for performing an atomic update
operation.  Under X86, this is done with a

lock:  add  [addr],0

in the file asm-x86/edac.h

This patch provides the MIPS arch with that atomic function, atomic_scrub() in

asm-mips/edac.h

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agodrivers/edac: fix edac_pci sysfs
Doug Thompson [Thu, 26 Jul 2007 17:41:15 +0000 (10:41 -0700)]
drivers/edac: fix edac_pci sysfs

This patch fixes sysfs exit code for the EDAC PCI device in a similiar manner
and the previous fixes for EDAC_MC and EDAC_DEVICE.

It removes the old (and incorrect) completion model and uses reference counts
on per instance kobjects and on the edac core module.

This pattern was applied to the edac_mc and edac_device code, but the EDAC PCI
code was missed.  In addition, this fixes a system hang after a low level
driver was unloaded.  (A cleanup function was called twice, which really
screwed things up)

Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agodrivers/edac: fix reset edac_mc pollmsec
Doug Thompson [Thu, 26 Jul 2007 17:41:14 +0000 (10:41 -0700)]
drivers/edac: fix reset edac_mc pollmsec

This fixes a deadlock that could occur on a 'setup' and 'teardown' sequence of
the workq for a edac_mc control structure instance.  A similiar fix was
previously implemented for the edac_device code.

In addition, the edac_mc device code there was missing code to allow the workq
period valu to be altered via sysfs control.

This patch adds that fix on the code, and allows for the changing of the
period value as well.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofix 'dynreloc miscount' link error on Powerpc
Sam Ravnborg [Thu, 26 Jul 2007 17:41:13 +0000 (10:41 -0700)]
fix 'dynreloc miscount' link error on Powerpc

Nathan Lynch <ntl@pobox.com> reported:
2.6.23-rc1 breaks the build for 64-bit powerpc for me (using
maple_defconfig):

  LD      vmlinux.o
powerpc64-unknown-linux-gnu-ld: dynreloc miscount for
kernel/built-in.o, section .opd
powerpc64-unknown-linux-gnu-ld: can not edit opd Bad value
make: *** [vmlinux.o] Error 1

However, I see a possibly related binutils patch:
http://article.gmane.org/gmane.comp.gnu.binutils/33650

It was tracked down to be caused by the weak prototype
declaration in mm.h:
__attribute__((weak)) const char *arch_vma_name(struct vm_area_struct *vma);

But there is no need to make the declaration weak - only the definition
needs to be marked weak.  So drop the weak declaration.  And in the process
drop the duplicate definition in page.h for powerpc.

Note: the arch_vma_name fix for x86_64 needs to be applied first to avoid
breaking x86_64

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nathan Lynch <ntl@pobox.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agox86_64: fix arch_vma_name
Roland McGrath [Thu, 26 Jul 2007 17:41:12 +0000 (10:41 -0700)]
x86_64: fix arch_vma_name

The function arch_vma_name() is declared weak and thus it was
not noticed that x86_64 had two almost identical implementations.

It was introduced in syscall32.c by: c633090e3105e779c97d4978e5e3d7d66b291cfb
It was introduced in mm/init.c by: 2aae950b21e4bc789d1fc6668faf67e8748300b7

Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agochipsfb: use correct pm state
Rafael J. Wysocki [Thu, 26 Jul 2007 17:41:12 +0000 (10:41 -0700)]
chipsfb: use correct pm state

chipsfb.c shouldn't use PM_SUSPEND_MEM in there, but PM_EVENT_SUSPEND.

Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofix inode_table test in ext234_check_descriptors
Eric Sandeen [Thu, 26 Jul 2007 17:41:11 +0000 (10:41 -0700)]
fix inode_table test in ext234_check_descriptors

ext[234]_check_descriptors sanity checks block group descriptor geometry at
mount time, testing whether the block bitmap, inode bitmap, and inode table
reside wholly within the blockgroup.  However, the inode table test is off
by one so that if the last block in the inode table resides on the last
block of the block group, the test incorrectly fails.  This is because it
tests the last block as (start + length) rather than (start + length - 1).

This can be seen by trying to mount a filesystem made such as:

 mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024

which yields:

 EXT2-fs error (device loop0): ext2_check_descriptors: Inode table for group 0 not in group (block 101)!
 EXT2-fs: group descriptors corrupted!

There is a similar bug in e2fsprogs, patch already sent for that.

(I wonder if inside(), outside(), and/or in_range() should someday be
used in this and other tests throughout the ext filesystems...)

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>