Oliver Neukum [Tue, 16 Jan 2007 08:47:12 +0000 (09:47 +0100)]
USB: power management for kaweth
- implements suspend when the network interface is down
- fixes a typo in comments
- adds debugging output for power management
- fixes a compiler warning
Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Phil Endecott [Mon, 15 Jan 2007 19:35:01 +0000 (11:35 -0800)]
usb: gadgetfs remove delayed init mode
Gadgetfs had a mode in which endpoint descriptors were written by the user
program before connection. This mode had some bugs, and hasn't seen much
(if any) use. This patch removes that mode, leaving the mode of operation
where the user program waits for endpoint 0 to report a SET_CONFIGURATION,
and only then configures the endpoints.
Marc Pignat [Tue, 9 Jan 2007 22:00:11 +0000 (14:00 -0800)]
USB: ohci-at91 refcount fix for irq wake enables
The attached patch fixes the unbalanced calls to enable_irq_wake() and
disable_irq_wake() in the AT91 USB Host driver.
It should resolve these kernel messages:
Unbalanced IRQ x wake disable
BUG: warning at kernel/irq/manage.c:167/set_irq_wake()
(The original code was debugged before a bug in the genirq wakeup irq
logic was fixed by adding the IRQ wake enable/disable refcounting.
Not all code yet uses the bugfixed model.)
Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 8 Jan 2007 21:18:05 +0000 (16:18 -0500)]
usb-storage: SCSI level fixes
This patch (as835) removes from usb-storage the code which sets all
devices to a SCSI level of at least SCSI-2. The original reasons for
doing this no longer apply, and in fact it prevents certain kinds of
ATA pass-thru commands from being used.
The patch also marks CB and CBI devices that are SCSI-0 (legacy SCSI)
as being single-LUN, since the combined SCSI-over-USB transport
protocol has no way to convey LUN information to these devices.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 8 Jan 2007 17:00:28 +0000 (12:00 -0500)]
UHCI: improved debugging checks for the frame list
This patch (as768) improves the debugging checks for the uhci-hcd
frame list. The number of entries displayed is limited to 10, and the
driver now checks for the correct Skeleton QH link value at the end of
each chain of Isochronous TDs. The code to compute these link values
is now used in two spots, so it is moved into its own separate
subroutine.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Sun, 31 Dec 2006 06:43:10 +0000 (22:43 -0800)]
USB: add binary API to usbmon
This patch adds a new, "binary" API in addition to the old, text API usbmon
had before. The new API allows for less CPU use, and it allows to capture
all data from a packet where old API only captured 32 bytes at most. There
are some limitations and conditions to this, e.g. in case someone constructs
a URB with 1GB of data, it's not likely to be captured, because even the
huge buffers of the new reader are finite. Nonetheless, I expect this new
capability to capture all data for all real life scenarios.
The downside is, a special user mode application is required where cat(1)
worked before. I have sample code at http://people.redhat.com/zaitcev/linux/
and Paolo Abeni is working on patching libpcap.
This patch was initially written by Paolo and later I tweaked it, and
we had a little back-and-forth. So this is a jointly authored patch, but
I am submitting this I am responsible for the bugs.
Signed-off-by: Paolo Abeni <paolo.abeni@email.it> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Bailey [Sun, 24 Dec 2006 07:14:58 +0000 (23:14 -0800)]
USB: Add usb_endpoint_xfer_control to usb.h
Added a function to check if an endpoint is a control endpoint.
There were similar functions for bulk, interrupt, and isoc,
but not for control endpoints.
Signed-off-by: Sarah Bailey <saharabeara@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johannes Hölzl [Sun, 17 Dec 2006 21:05:09 +0000 (22:05 +0100)]
USB: Bugfix for aircable: Add module and name to usb_serial_driver
While adding the dynamic-id support to usb serial I found a small bug in
the air cable driver:
Adds module and name information to the usb_serial_driver instance
of aircable. So the aircable driver is correctly shown under
/sys/bus/usb-serial/drivers/aircable and has the module link.
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johannes Hölzl [Sun, 17 Dec 2006 20:50:24 +0000 (21:50 +0100)]
USB serial: add driver pointer to all usb-serial drivers
Every usb serial driver should have a pointer to the corresponding usb driver.
So the usb serial core can add a new id not only to the usb serial driver, but
also to the usb driver.
Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag
no_dynamic_id=1. This is added now.
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB serial: add dynamic id support to usb-serial core
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few
things and getting it all working properly.
This adds support for dynamic usb ids to the usb serial core. The file
"new_id" will show up under the usb serial driver, not the usb driver
associated with the usb-serial driver (yeah, it can be a bit confusing
at first glance...)
This patch also modifies the USB core to allow the usb-serial core to
reuse much of the dynamic id logic.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
Sylvain Munaut [Wed, 13 Dec 2006 20:09:55 +0000 (21:09 +0100)]
ohci: Add support for OHCI controller on the of_platform bus
PPC embedded systems can have a ohci controller builtin. In the
new model, it will end up as a driver on the of_platform bus,
this patches takes care of them.
Sylvain Munaut [Wed, 13 Dec 2006 20:09:54 +0000 (21:09 +0100)]
ohci: Rework bus glue integration to allow several at once
The previous model had the module_init & module_exit function in the
bus glue .c files themselves. That's a problem if several glues need
to be selected at once and the driver is built has module. This case
is quite common in embedded system where you want to handle both the
integrated ohci controller and some extra controller on PCI.
The ohci-hcd.c file now provide the module_init & module_exit and
appropriate driver registering/unregistering is done conditionally,
using #ifdefs.
Windows Mobile 5 based devices described as supporting "ActiveSync":
- Speak RNDIS but lack the CDC and union descriptors. This patch
updates the cdc ethernet code to fake ACM descriptors we need.
- Require RNDIS_MSG_QUERY messages to include a buffer of the size the
response should generate. This patch updates the rndis host code to
pass this will-be-ignored data.
The resulting RNDIS host code has been reported to work with several
WM5 based devices.
(Note that a fancier patch is available at synce.sf.net.)
Some bugfixes, affecting not just ActiveSync:
(a) when cleaning up after RNDS init fails, scrub the second interface
just like cdc_ether does, so disconnect won't oops.
(b) handle peripherals that use the pad-to-end-of-packet option; some
devices can't talk to us if that option doesn't work.
(c) when choosing configurations, don't forget about an RNDIS config
just because the RNDIS driver is dynamically linked.
Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update.
Also for paranoia's sake, refuse to talk to something that looks like a
real modem instead of RNDIS.
Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Mon, 11 Dec 2006 23:59:04 +0000 (15:59 -0800)]
USB: ethernet gadget interop with MCCI Windows driver
It turns out that minor tweaks to the "CDC Subset" support in the Ethernet
gadget driver, just updating a config descriptor, let it be automagically
recognized by a Windows driver supported by MCCI.
This patch adds those descriptors, so systems using PXA 255 processors
(like Gumstix etc) can interop with those commercial MS-Windows drivers.
This is a Good Thing since Microsoft's RNDIS code has bugginess issues,
which are unfortunately compounded by "won't fix" issues as well as "the
published specs are incomplete and wrong" issues. Being able to talk to
the MCCI driver gives Windows users another connectivity option. (MCCI
also has CDC Ethernet drivers, which can help most non-PXA processors.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes a warning introduced by the big endian MMIO EHCI
support patch on platforms that don't have readl_be/writel_be variants
(though mostly harmless as those are called in an if (0) statement,
but gcc still warns).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch fixes a warning introduces by the split endian OHCI support
patch on platforms that don't have readl_be/writel_be variants (though
mostly harmless as those are called in an if (0) statement, but gcc
still warns).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: Implement support for EHCI with big endian MMIO
This patch implements supports for EHCI controllers whose MMIO
registers are big endian and enables that functionality for
the Toshiba SCC chip. It does _not_ add support for big endian
in-memory data structures as this is not needed for that chip
and I hope it will never be.
The guts of the patch are to convert readl(...) to
ehci_readl(ehci, ...) and similarly for register writes.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch separates support for big endian MMIO register access
and big endian descriptors in order to support the Toshiba SCC
implementation which has big endian registers but little endian
in-memory descriptors.
It simplifies the access functions a bit in ohci.h while at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: Rework the OHCI quirk mecanism as suggested by David
This patch applies David Brownell's suggestion for reworking the
OHCI quirk mechanism via a table of PCI IDs. It adapts the existing
quirks to use that mechanism.
This also moves the quirks to reset() as suggested by the comment
in there. This is necessary as we need to have the endian properly
set before we try to init the controller.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds EPiC support to the io_edgeport driver which adds
support for a number of NCR printers:
- NCR (Axiohm) 7401-K580 printer
- NCR (TEC) 7401-K590 printer, 7402-K592
- NCR (TEC) 7167, 7168 printers
- NCR (TEC) 7197, 7198, F306, F307, F309 printers
- NCR (Axiohm) 7194 printer
- NCR (Axiohm) 7158 printer
and a few more.
Linus Torvalds [Wed, 7 Feb 2007 16:10:48 +0000 (08:10 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
JFS: Remove incorrect kgdb define
JFS: call io_schedule() instead of schedule() to avoid deadlock
JFS: Add lockdep annotations
JFS: Avoid BUG() on a damaged file system
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
[GFS2] make gfs2_writepages() static
[GFS2] Unlock page on prepare_write try lock failure
[GFS2] nfsd readdirplus assertion failure
[DLM] fix softlockup in dlm_recv
[DLM] zero new user lvbs
[DLM/GFS2] indent help text
[GFS2] Fix unlink deadlocks
[GFS2] Put back semaphore to avoid umount problem
[GFS2] more CURRENT_TIME_SEC
[GFS2/DLM] fix GFS2 circular dependency
[GFS2/DLM] use sysfs
[GFS2] make lock_dlm drop_count tunable in sysfs
[GFS2] increase default lock limit
[GFS2] Fix list corruption in lops.c
[GFS2] Fix recursive locking attempt with NFS
[DLM] can miss clearing resend flag
[DLM] saved dlm message can be dropped
[DLM] Make sock_sem into a mutex
[GFS2] Fix typo in glock.c
[GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2
...
[GFS2] Unlock page on prepare_write try lock failure
When the try lock of the glock failed in prepare_write we were
incorrectly exiting this function with the page still locked.
This was resulting in further I/O to this page hanging.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Linus Torvalds [Wed, 7 Feb 2007 01:24:58 +0000 (17:24 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
[IA64] swiotlb abstraction (e.g. for Xen)
[IA64] swiotlb cleanup
[IA64] make swiotlb use bus_to_virt/virt_to_bus
[IA64] swiotlb bug fixes
[IA64] Hook up getcpu system call for IA64
[IA64] clean up sparsemem memory_present call
[IA64] show_mem() for IA64 sparsemem NUMA
[IA64] missing exports hwsw_sync_...
[IA64] virt_to_page() can be called with NULL arg
[IA64] alignment bug in ldscript
[IA64] register memory ranges in a consistent manner
[IA64] Enable SWIOTLB only when needed
[IA64-SGI] Check for TIO errors on shub2 Altix
[IA64] remove bogus prototype ia64_esi_init()
[IA64] Clear IRQ affinity when unregistered
[IA64] fix ACPI Kconfig issues
[IA64] Fix NULL-pointer dereference in ia64_machine_kexec()
[IA64] find thread for user rbs address
[IA64] use snprintf() on features field of /proc/cpuinfo
[IA64] enable singlestep on system call
...
Linus Torvalds [Tue, 6 Feb 2007 22:56:37 +0000 (14:56 -0800)]
Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
USB HID: handle multi-interface devices for Apple macbook pro properly
HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG
USB HID: fix bogus comment in hid_get_class_descriptor()
USB HID: remove hid_find_field_by_usage()
HID: API - fix leftovers of hidinput API in USB HID
HID: hid debug from hid-debug.h to hid layer
hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter
hid: quirk for multi-input devices with unneeded output reports
hid: allow force feedback for multi-input devices
Linus Torvalds [Tue, 6 Feb 2007 22:55:33 +0000 (14:55 -0800)]
Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/ehca: Remove obsolete prototypes
IB/ehca: Remove use of do_mmap()
RDMA/addr: Handle ethernet neighbour updates during route resolution
IB: Make sure struct ib_user_mad.data is aligned
IB/srp: Don't wait for response when QP is in error state.
IB: Return qp pointer as part of ib_wc
IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>
Linus Torvalds [Tue, 6 Feb 2007 22:54:54 +0000 (14:54 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits)
mmc: tifm: replace kmap with page_address
mmc: sdhci: fix voltage ocr
mmc: sdhci: replace kmap with page_address
mmc: wbsd: replace kmap with page_address
mmc: handle pci_enable_device() return value in sdhci
mmc: Proper unclaim in mmc_block
mmc: change wbsd mailing list
mmc: Graceful fallback for fancy features
mmc: Handle wbsd's stupid command list
mmc: Allow host drivers to specify max block count
mmc: Allow host drivers to specify a max block size
tifm_sd: add suspend and resume functionality
tifm_core: add suspend/resume infrastructure for tifm devices
tifm_7xx1: prettify
tifm_7xx1: recognize device 0xac8f as supported
tifm_7xx1: switch from workqueue to kthread
tifm_7xx1: Merge media insert and media remove functions
tifm_7xx1: simplify eject function
Add dummy_signal_irq function to save check in ISR
Remove unused return value from signal_irq callback
...
David Howells [Tue, 6 Feb 2007 13:45:51 +0000 (13:45 +0000)]
[PATCH] Keys: Fix key serial number collision handling
Fix the key serial number collision avoidance code in key_alloc_serial().
This didn't use to be so much of a problem as the key serial numbers were
allocated from a simple incremental counter, and it would have to go through
two billion keys before it could possibly encounter a collision. However, now
that random numbers are used instead, collisions are much more likely.
This is fixed by finding a hole in the rbtree where the next unused serial
number ought to be and using that by going almost back to the top of the
insertion routine and redoing the insertion with the new serial number rather
than trying to be clever and attempting to work out the insertion point
pointer directly.
This fixes kernel BZ #7727.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Minor cleanup
[CIFS] Missing free in error path
[CIFS] Reduce cifs stack space usage
[CIFS] lseek polling returned stale EOF
Linus Torvalds [Tue, 6 Feb 2007 22:35:30 +0000 (14:35 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits)
[MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro
[MIPS] Fix warnings in run_uncached on 32bit kernel
[MIPS] Comment fix
[MIPS] MT: Nuke duplicate mips_mt_regdump() prototype.
[MIPS] Alchemy: Fix PCI-memory access
[MIPS] Move .set reorder out of conditional code
[MIPS] Check FCSR for pending interrupts before restoring from a context.
[MIPS] Jaguar ATX: Fix large number of warnings.
[MIPS] Jaguar: Fix MAC address detection after platform_device conversion.
[MIPS] SMTC: Make a bunch of functions and variables static.
[MIPS] Use compat_sys_pselect6
[MIPS] SMTC: Cleanup idle hook invocation.
[MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity
[MIPS] IRIX: Linux coding style cleanups.
[MIPS] PB1100: Fix pile of warnings
[MIPS] Alchemy: Fix bunch of warnings
[MIPS] Whitespace cleanups.
[MIPS] Alchemy: Fix bunch more warnings.
[MIPS] Use ARRAY_SIZE macro when appropriate
[MIPS] Fix some whitespace damage
...
Oleg Verych [Tue, 6 Feb 2007 01:18:22 +0000 (02:18 +0100)]
[PATCH] kbuild: correctly skip tilded backups in localversion files
Tildes as in path as in filenames are handled correctly now:
only files, containing tilde '~', are backups, thus are not valid.
[KJ]:
Definition of `space' was removed, scripts/Kbuild.include has one.
That definition was taken right from the GNU make manual, while Kbuild's
version is original.
Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Bastian Blank <bastian@waldi.eu.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Oleg Verych <olecom@flower.upol.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Verych [Tue, 6 Feb 2007 01:18:20 +0000 (02:18 +0100)]
[PATCH] kbuild scripts: replace gawk, head, bc with shell, update
Replacing overhead of using some (external) programs
instead of good old `sh'.
Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: William Stearns <wstearns@pobox.com> Cc: Martin Schlemmer <azarah@nosferatu.za.org> Signed-off-by: Oleg Verych <olecom@flower.upol.cz> Acked-by: Mark Lord <lkml@rtr.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yoichi Yuasa [Tue, 6 Feb 2007 01:59:22 +0000 (10:59 +0900)]
[MIPS] Fix warnings in run_uncached on 32bit kernel
arch/mips/lib/uncached.c: In function 'run_uncached':
arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type
arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type
Alexander Bigga [Thu, 21 Dec 2006 10:25:19 +0000 (11:25 +0100)]
[MIPS] Alchemy: Fix PCI-memory access
The problem was introduced in 2.6.18.3 with the casting of some
36bit-defines (PCI memory) in au1000.h to resource_size_t which may be
u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT.
With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed
because the ioremap in arch/mips/au1000/common/pci.c already used the
truncated addresses.
With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan
aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c
fails because the maximum iomem-address is 0xffffffff (32bit) but the
pci-memory-start-address is 0x440000000 (36bit).
To get pci working again, I propose the following patch:
1. remove the resource_size_t-casting from au1000.h again
2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and
necessary here. The 36bit-handling will be done in __fixup_bigphys_addr).
With this patch pci works again like in 2.6.18.2, the gcc-compile warnings
in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL.
Signed-off-by: Alexander Bigga <ab@mycable.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Quigley [Wed, 28 Jun 2006 13:36:46 +0000 (09:36 -0400)]
[MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity
This patch adds LSM hooks into the setaffinity and getaffinity functions
for the mips architecture to enable security modules to control these
operations between tasks with different security attributes. This
implementation uses the existing task_setscheduler and task_getscheduler
LSM hooks.
Signed-Off-By: David Quigley <dpquigl@tycho.nsa.gov> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 7 Nov 2006 10:19:05 +0000 (10:19 +0000)]
[MIPS] PB1100: Fix pile of warnings
CC arch/mips/au1000/pb1100/board_setup.o
arch/mips/au1000/pb1100/board_setup.c: In function ‘board_setup’:
arch/mips/au1000/pb1100/board_setup.c:104: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:109: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_clksrc’
arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_freqctrl’
arch/mips/au1000/pb1100/board_setup.c:50: warning: unused variable ‘pin_func’
Ralf Baechle [Tue, 7 Nov 2006 09:58:30 +0000 (09:58 +0000)]
[MIPS] Alchemy: Fix bunch of warnings
CC arch/mips/au1000/common/pci.o
arch/mips/au1000/common/pci.c:42: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c:43: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c:49: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c:50: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c: In function ‘au1x_pci_setup’:
arch/mips/au1000/common/pci.c:82: warning: ISO C90 forbids mixed declarations and code
Atsushi Nemoto [Tue, 16 Jan 2007 14:29:11 +0000 (23:29 +0900)]
[MIPS] Kconfig: Move some entries to appropriate menu
Currently KEXEC is in "Machine selection", SECCOMP, PM, APM are in
"Executable file formats" menu. Move KEXEC and SECCOMP to "Kernel
type" and PM, APM to new "Power management options" menu. Also
replace "config PM" with kernel/power/Kconfig.
Franck Bui-Huu [Wed, 10 Jan 2007 08:44:05 +0000 (09:44 +0100)]
[MIPS] FLATMEM: introduce PHYS_OFFSET.
The old code was assuming that min_low_pfn was always 0. This
means that platforms having a big hole at their memory start
paid the price of wasting some memory for the allocation of
unused entries in mem_map[].
This patch prevents this waste.
It introduces PHYS_OFFSET define which is the start of the
physical memory and uses it wherever needed. Specially when
converting physical/virtual addresses into virtual/physical
ones.
Franck Bui-Huu [Wed, 10 Jan 2007 08:44:04 +0000 (09:44 +0100)]
[MIPS] Setup min_low_pfn/max_low_pfn correctly
This patch makes a better usage of these two globals.
'min_low_pfn' is now correctly setup for all configs, which
allow us to rely on it in boot memory code init.
Atsushi Nemoto [Fri, 29 Dec 2006 15:43:59 +0000 (00:43 +0900)]
[MIPS] prom_free_prom_memory cleanup
Current prom_free_prom_memory() implementations are almost same as
free_init_pages(), or no-op. Make free_init_pages() extern (again)
and make prom_free_prom_memory() use it.
Atsushi Nemoto [Sun, 14 Jan 2007 14:41:42 +0000 (23:41 +0900)]
[MIPS] Make I8259A_IRQ_BASE customizable
Move I8259A_IRQ_BASE from asm/i8259.h to asm/mach-generic/irq.h and
make it really customizable. And remove I8259_IRQ_BASE declared on
some platforms. Currently only NEC_CMBVR4133 is using custom
I8259A_IRQ_BASE value.
Atsushi Nemoto [Sun, 7 Jan 2007 17:14:29 +0000 (02:14 +0900)]
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header
The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all
platforms and are same value on most platforms (0 or 16, depends on
CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make
them customizable. This will save a few cycle on each CPU interrupt.
A good side effect is removing some dependencies to MALTA in generic
SMTC code.
Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq
mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing
them might cause some header dependency problem and there seems no
good reason to customize it. So currently only VR41XX is using custom
MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259.
Testing this patch on those platforms is greatly appreciated. Thank
you.
Wendy Cheng [Tue, 6 Feb 2007 08:52:16 +0000 (03:52 -0500)]
[GFS2] nfsd readdirplus assertion failure
Glock assertion failure found in '07 NFS connectathon. One of the NFSDs
is doing a "readdirplus" procedure call. It passes the logic into
gfs2_readdir() where it obtains its directory inode glock. This is then
followed by filehandle construction that invokes lookup code. It hits
the assertion failure while trying to obtain the inode glock again
inside gfs2_drevalidate().
This patch bypasses the recursive glock call if caller already holds the
lock.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Jan Beulich [Tue, 6 Feb 2007 02:53:04 +0000 (18:53 -0800)]
[IA64] swiotlb abstraction (e.g. for Xen)
Add abstraction so that the file can be used by environments other than IA64
and EM64T, namely for Xen.
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Jan Beulich [Tue, 6 Feb 2007 02:51:25 +0000 (18:51 -0800)]
[IA64] swiotlb cleanup
- add proper __init decoration to swiotlb's init code (and the code calling
it, where not already the case)
- replace uses of 'unsigned long' with dma_addr_t where appropriate
- do miscellaneous simplicfication and cleanup
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Jan Beulich [Tue, 6 Feb 2007 02:49:45 +0000 (18:49 -0800)]
[IA64] make swiotlb use bus_to_virt/virt_to_bus
Convert all phys_to_virt/virt_to_phys uses to bus_to_virt/virt_to_bus, as is
what is meant and what is needed in (at least) some virtualized environments
like Xen.
Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Jan Beulich [Tue, 6 Feb 2007 02:46:40 +0000 (18:46 -0800)]
[IA64] swiotlb bug fixes
This patch fixes
- marking I-cache clean of pages DMAed to now only done for IA64
- broken multiple inclusion in include/asm-x86_64/swiotlb.h
- missing call to mark_clean in swiotlb_sync_sg()
- a (perhaps only theoretical) issue in swiotlb_dma_supported() when
io_tlb_end is exactly at the end of memory
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
projects / linux-2.6 / log