Dave Johnson [Tue, 6 Sep 2005 22:17:40 +0000 (15:17 -0700)]
[PATCH] fix cramfs making duplicate entries in inode cache
Every time cramfs_lookup() is called to lookup and inode for a dentry,
get_cramfs_inode() will allocate a new inode without checking to see if that
inode already exists in the inode cache.
This is fine the first time, but if the dentry cache entry(ies) associated
with that inode are aged out, but the inode entry is not aged out (which can
be quite common if the inode has buffer cache linked to it), cramfs_lookup()
will be called again and another inode will be allocated and added to the
inode cache creating a duplicate in the inode cache.
The big issue here is that the buffers associated with each inode cache entry
are not shared between the duplicates!
The older inode entries are now orphaned as no dentry points to it and won't
be freed until the buffer cache assoicated with them are first freed. The
newest entry will have to create all new buffer cache for each part of its
file as the old buffer cache is now orphaned as well.
Patch below fixes this by making get_cramfs_inode() use the inode cache before
blindly creating a new entry every time. This eliminates the duplicate inodes
and duplicate buffer cache.
[PATCH] remove a redundant variable in sys_prctl()
The patch removes a redundant variable `sig' from sys_prctl().
For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG
then the value of arg2 is assigned to an int variable named sig. Then sig
is tested with valid_signal() and later used to set the value of
current->pdeath_signal .
There is no reason to use this intermediate variable since valid_signal()
takes a unsigned long argument, so it can handle being passed arg2
directly, and if the call to valid_signal is OK, then we know the value of
arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int
and thus there's no problem assigning it later to current->pdeath_signal
(which is an int).
The patch gets rid of the pointless variable `sig'.
This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my
system.
Patch has been compile tested, boot tested, and just to make damn sure I
didn't break anything I wrote a quick test app that calls
prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a
unsigned long, and it behaves as expected with and without the patch.
Peter Staubach [Tue, 6 Sep 2005 22:17:35 +0000 (15:17 -0700)]
[PATCH] largefile support for accounting
There is a problem in the accounting subsystem in the kernel can not
correctly handle files larger than 2GB. The output file containing the
process accounting data can grow very large if the system is large enough
and active enough. If the 2GB limit is reached, then the system simply
stops storing process accounting data.
Another annoying problem is that once the system reaches this 2GB limit,
then every process which exits will receive a signal, SIGXFSZ. This signal
is generated because an attempt was made to write beyond the limit for the
file descriptor. This signal makes it look like every process has exited
due to a signal, when in fact, they have not.
The solution is to add the O_LARGEFILE flag to the list of flags used to
open the accounting file. The rest of the accounting support is already
largefile safe.
The changes were tested by constructing a large file (just short of 2GB),
enabling accounting, and then running enough commands to cause the
accounting data generated to increase the size of the file to 2GB. Without
the changes, the file grows to 2GB and the last command run in the test
script appears to exit due a signal when it has not. With the changes,
things work as expected and quietly.
There are some user level changes required so that it can deal with
largefiles, but those are being handled separately.
Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch simplifies the usage of do_notify_parent_cldstop(), it lessens
the source and .text size slightly, and makes the code (in my opinion) a
bit more readable.
I am sending this patch now because I'm afraid Paul will touch
do_notify_parent_cldstop() really soon, It's better to cleanup first.
I've had WARN_CONSOLE_UNLOCKED warnings when calling TIOCLINUX
TIOCL_BLANKSCREEN and TIOCL_UNBLANKSCREEN.
(I'm blind and I use a braille display. I use those functions to blank my
laptop's screen so people don't read it, and hopefully to conserve power.)
The warnings are from these places:
do_blank_screen at drivers/char/vt.c:2754 (Not tainted)
save_screen at drivers/char/vt.c:575 (Not tainted)
do_unblank_screen at drivers/char/vt.c:2822 (Not tainted)
set_palette at drivers/char/vt.c:2908 (Not tainted)
At a glance I would think the following patch ought to fix that. Tested on
one machine. Could you please tell me if this is correct and/or forward
the patch where appropriate...
Signed-off-by: Stephane Doyon <s.doyon@videotron.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Neil Horman [Tue, 6 Sep 2005 22:17:30 +0000 (15:17 -0700)]
[PATCH] Add missing overflow check in get_blkdev_list
Patch to clean up missing overflow check in get_blkdev_list. The printf
which adds the "Block Devices" string in /proc/devices can overflow the
presented page if get_chrdev_list eats up the entire 4k space.
Signed-off-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The phy status register must be read twice in order to get the actual link
state.
Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Gibson [Tue, 6 Sep 2005 22:17:26 +0000 (15:17 -0700)]
[PATCH] Fix function/macro name collision on i386 oprofile
The i386 OProfile code has a function named nmi_exit(), which collides with
the nmi_exit() macro in linux/hardirq.h. At the moment, we get away with
it, because hardirq.h isn't included in the oprofile code. I hit this as a
bug when working with a patch which (indirectly) adds a #include of
hardirq.h to oprofile.
Regardless, the name collision is probably not a good idea, so this patch
fixes it, renaming the oprofile function to op_nmi_exit(). It also renames
the nmi_init() and nmi_timer_init() functions similarly, for consistency.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] CHECK_IRQ_PER_CPU() to avoid dead code in __do_IRQ()
IRQ_PER_CPU is not used by all architectures. This patch introduces the
macros ARCH_HAS_IRQ_PER_CPU and CHECK_IRQ_PER_CPU() to avoid the generation
of dead code in __do_IRQ().
ARCH_HAS_IRQ_PER_CPU is defined by architectures using IRQ_PER_CPU in their
include/asm_ARCH/irq.h file.
Through grepping the tree I found the following architectures currently use
IRQ_PER_CPU:
H. Peter Anvin [Tue, 6 Sep 2005 22:17:24 +0000 (15:17 -0700)]
[PATCH] Make the bzImage format self-terminating
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Frank Sorenson <frank@tuxrocks.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adrian Bunk [Tue, 6 Sep 2005 22:17:22 +0000 (15:17 -0700)]
[PATCH] fs/Kconfig: quota help text updates
This patch contains the following updates to the help texts:
- QUOTA: most people will get the quota utilities from their
distribution, and if not the mini-HOWTO will tell them
- QFMT_V2: quota utilities 3.01 are no longer recent, they are now
ancient
and 3.01 is lower than the minimal version documented in
Documentation/Changes
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This interface is said to be commonly used in germany: "The patch has been
proven to work fine in a beige G3 Mac."
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=262324
Signed-off-by: maximilian attems <janitor@sternwelten.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- replace drq selection with hopefully clearer while semantically the
same construct: take write request, if there is any, otherwise take read
one, or NULL if none exist.
Olof Johansson [Tue, 6 Sep 2005 22:17:19 +0000 (15:17 -0700)]
[PATCH] Add rdinit parameter to pick early userspace init
Since early userspace was added, there's no way to override which init to
run from it. Some people tack on an extra cpio archive with a link from
/init depending on what they want to run, but that's sometimes impractical.
Changing the "init=" to also override the early userspace isn't feasible,
since it is still used to indicate what init to run from disk when early
userspace has completed doing whatever it's doing (i.e. load filesystem
modules and drivers).
Instead, introduce "rdinit=" and make it override the default "/init" if
specified.
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes bug titled "sunrpc as module and bad proc/sys link count"
reported by Jiri Slaby.
The problem was, that only proc_dir_entry->nlink was updated and the
corresponding inode->i_nlink was not. The fix is to implement the
inode->getattr() method, and update i_nlink (if necessary).
A quick audit of proc code shows that no other attribute changes after
creation.
Mika Kukkonen [Tue, 6 Sep 2005 22:17:17 +0000 (15:17 -0700)]
[PATCH] create_workqueue_thread() signedness fix
With "-W -Wno-unused -Wno-sign-compare" I get the following compile warning:
CC kernel/workqueue.o
kernel/workqueue.c: In function `workqueue_cpu_callback':
kernel/workqueue.c:504: warning: ordered comparison of pointer with integer zero
On error create_workqueue_thread() returns NULL, not negative pointer, so
following trivial patch suggests itself.
Signed-off-by: Mika Kukkonen <mikukkon@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Robert Love [Tue, 6 Sep 2005 22:17:16 +0000 (15:17 -0700)]
[PATCH] fsnotify: hook on removexattr, too
Add fsnotify_xattr() hook to removexattr().
Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: John McCtuchan <ttb@tentacle.dhs.org> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This speeds up directory reads for large FAT partitions, if the buffercache
has to be filled from the drive. Following values were taken from:
$ time find path_to_freshly_mounted_fat > /dev/null
on an otherwise idle system.
FAT with 16KB Clusters on IDE attached drive: Factor 2
FAT with 32KB Clusters on USB2 attached drive: Factor 10 (!)
Its less than 1/10 slower, if the buffercache is uptodate.
The patch introduces the new function fat_dir_readahead().
fat_dir_readahead() calls sb_breadahead() to readahead a whole cluster,
if the requested sector is the first one in a cluster.
It is usefull to do this, because on FAT directories occupy whole
clusters, with the exception of FAT12/FAT16 root dirs.
Readahead is only done, if the cluster's first sector is not uptodate
to avoid overhead, when the buffer cache is already uptodate.
Note that under memory pressure, the maximal byte count wasted
(read: has to be red from disk twice) is 1 cluster's size. Thats 64KB.
fat_dir_readahead() is called from fat__get_entry().
There is also an unrelated cleanup at one spot:
if (bh)
brelse(bh);
is replaced with:
brelse(bh);
brelse() can handle NULL pointer arguments by itself.
Thomas Koeller [Tue, 6 Sep 2005 22:17:11 +0000 (15:17 -0700)]
[PATCH] flush icache early when loading module
Change the sequence of operations performed during module loading to flush
the instruction cache before module parameters are processed. If a module
has parameters of an unusual type that cannot be handled using the standard
accessor functions param_set_xxx and param_get_xxx, it has to to provide a
set of accessor functions for this type. This requires module code to be
executed during parameter processing, which is of course only possible
after the icache has been flushed.
Signed-off-by: Thomas Koeller <thomas@koeller.dyndns.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bruce Allan [Tue, 6 Sep 2005 22:17:08 +0000 (15:17 -0700)]
[PATCH] sunrpc: cache_register can use wrong module reference
When registering an RPC cache, cache_register() always sets the owner as the
sunrpc module. However, there are RPC caches owned by other modules. With
the incorrect owner setting, the real owning module can be removed potentially
with an open reference to the cache from userspace.
For example, if one were to stop the nfs server and unmount the nfsd
filesystem, the nfsd module could be removed eventhough rpc.idmapd had
references to the idtoname and nametoid caches (i.e.
/proc/net/rpc/nfs4.<cachename>/channel is still open). This resulted in a
system panic on one of our machines when attempting to restart the nfs
services after reloading the nfsd module.
The following patch adds a 'struct module *owner' field in struct
cache_detail. The owner is further assigned to the struct proc_dir_entry
in cache_register() so that the module cannot be unloaded while user-space
daemons have an open reference on the associated file under /proc.
Signed-off-by: Bruce Allan <bwa@us.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes
dma-mapping.h explicitly because it caused errors on some architectures
otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for
details
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Steven Pratt [Tue, 6 Sep 2005 22:17:06 +0000 (15:17 -0700)]
[PATCH] readahead: reset cache_hit earlier
We don't reset the cache hit count until after readahead does a successful
readahead. This seems to leave a corner case open where we miss in cache,
but don't restart the readhead right away.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] PNP: make pnp_dbg conditional directly on CONFIG_PNP_DEBUG
Seems pointless to require .c files to test CONFIG_PNP_DEBUG and
conditionally define DEBUG before including <linux/pnp.h>. Just test
CONFIG_PNP_DEBUG directly in pnp.h.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alex Williamson [Tue, 6 Sep 2005 22:17:04 +0000 (15:17 -0700)]
[PATCH] optimize writer path in time_interpolator_get_counter()
Christoph Lameter <clameter@engr.sgi.com>
When using a time interpolator that is susceptible to jitter there's
potentially contention over a cmpxchg used to prevent time from going
backwards. This is unnecessary when the caller holds the xtime write
seqlock as all readers will be blocked from returning until the write is
complete. We can therefore allow writers to insert a new value and exit
rather than fight with CPUs who only hold a reader lock.
Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Erik Waling [Tue, 6 Sep 2005 22:17:02 +0000 (15:17 -0700)]
[PATCH] sonypi SPIC initialisation fix
Newer Sony VAIO models (VGN-S480, VGN-S460, VGN-S3XP etc) use a new method to
initialize the SPIC device. The new way to initialize (and disable) the
device comes directly from the AML code in the _CRS, _SRS and _DIS methods
from the DSDT table. This patch adds support for the new models.
Signed-off-by: Erik Waling <erikw@acc.umu.se> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avery, Brian [Tue, 6 Sep 2005 22:16:56 +0000 (15:16 -0700)]
[PATCH] Add warning `init=' to init/main.c
I passed init=/mylinuxrc to the kernel on the command line. The kernel
silently dropped down to exec /sbin/init. It turned out that /mylinuxrc
had improper permissions. Without any warning message from the kernel that
something was wrong it took awhile to find the issue. The patch below adds
a warning.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark Bellon [Tue, 6 Sep 2005 22:16:54 +0000 (15:16 -0700)]
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts
If /etc/mtab is a regular file all of the mount options (of a file system)
are written to /etc/mtab by the mount command. The quota tools look there
for the quota strings for their operation. If, however, /etc/mtab is a
symlink to /proc/mounts (a "good thing" in some environments) the tools
don't write anything - they assume the kernel will take care of things.
While the quota options are sent down to the kernel via the mount system
call and the file system codes handle them properly unfortunately there is
no code to echo the quota strings into /proc/mounts and the quota tools
fail in the symlink case.
The attached patchs modify the EXT[2|3] and JFS codes to add the necessary
hooks. The show_options function of each file system in these patches
currently deal with only those things that seemed related to quotas;
especially in the EXT3 case more can be done (later?).
Jan Kara also noted the difficulty in moving these changes above the FS
codes responding similarly to myself to Andrew's comment about possible
VFS migration. Issue summary:
- FS codes have to process the entire string of options anyway.
- Only FS codes that use quotas must have a show_options function (for
quotas to work properly) however quotas are only used in a small number
of FS.
- Since most of the quota using FS support other options these FS codes
should have the a show_options function to show those options - and the
quota echoing becomes virtually negligible.
Based on feedback I have modified my patches from the original:
JFS a missing patch has been restored to the posting
EXT[2|3] and JFS always use the show_options function
- Each FS has at least one FS specific option displayed
- QUOTA output is under a CONFIG_QUOTA ifdef
- a follow-on patch will add a multitude of options for each FS
EXT[2|3] and JFS "quota" is treated as "usrquota"
EXT3 journalled data check for journalled quota removed
EXT[2|3] mount when quota specified but not compiled in
- no changes from my original patch. I tested the patch and the codes
warn but
- still mount. With all due respection I believe the comments
otherwise were a
- misread of the patch. Please reread/test and comment. XFS patch
removed - the XFS team already made the necessary changes EXT3 mixing
old and new quotas are handled differently (not purely exclusive)
- if old and new quotas for the same type are used together the old
type is silently depricated for compatability (e.g. usrquota and
usrjquota)
- mixing of old and new quotas is an error (e.g. usrjquota and
grpquota)
Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Russell King [Tue, 6 Sep 2005 22:16:52 +0000 (15:16 -0700)]
[PATCH] Fix sound/arm/Makefile for locality of reference
Ensure that sound/arm/Makefile is sanely organised so that additions to it
don't break all other patches out there. This means I only have to adjust
the line numbers in my patch queue rather than having to re-generate by
hand those which touch this file.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Daniel Ritz [Tue, 6 Sep 2005 22:16:50 +0000 (15:16 -0700)]
[PATCH] yenta: make ToPIC95 bridges work with 16bit cards
ToPIC95 brides (and maybe some other too) require to use the ExCA registers
to power up the socket if a 16bit card is pluged. allow socket drivers to
set a flag so that yenta does just that. also clean up yenta_get_status()
a bit to use the new yenta_get_power() function.
Side note: ToPIC97 bridges (at least in Rev.5 i have) don't require this.
Ryan Underwood <nemesis-lists@icequake.net> said:
According to the mail that David Hinds received from a Toshiba engineer,
ToPIC95 and 97 do require this, and ToPIC100 does not. Maybe you have a
later revision.
For all chips, 16-bit cards can be enabled through ExCA. So doesn't it
make sense just to make this the default behavior for all Toshiba chips,
to avoid corner cases showing up later?
Daniel responded:
I disagree with ryan to change anything for topic97 bridges. they work.
and I couldn't find (read google) any report of a topic97 breaking on
applying power with the CB registers.
I'm having several toshba notebooks at work (and home) with topic95,97,100
bridges. Only the ones with a topic95 didn't work.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
H. J. Lu [Tue, 6 Sep 2005 22:16:49 +0000 (15:16 -0700)]
[PATCH] auxiliary vector cleanups
The size of auxiliary vector is fixed at 42 in linux/sched.h. But it isn't
very obvious when looking at linux/elf.h. This patch adds AT_VECTOR_SIZE
so that we can change it if necessary when a new vector is added.
Because of include file ordering problems, doing this necessitated the
extraction of the AT_* symbols into a standalone header file.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] radix-tree: Remove unnecessary indirections and clean up code
- There is frequent use of indirections in the radix code. This patch
removes those indirections, makes the code more readable and allows
the compilers to generate better code.
- Removing indirections allows the removal of several casts.
- Removing indirections allows the reduction of the radix_tree_path
size from 3 to 2 words.
- Use pathp-> consistently.
- Remove unnecessary tmp variable in radix_tree_insert
- Separate the upper layer processing from the lowest layer in __lookup()
in order to make it easier to understand what is going on and allow
compilers to generate better code for the loop.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pavel Machek [Tue, 6 Sep 2005 22:16:45 +0000 (15:16 -0700)]
[PATCH] Support powering sharp zaurus sl-5500 LCD up and down
This adds support for powering Zaurus's video up and down. PDA without
screen is kind of useless, so it is quite important... I'll have to figure
out how to really control the frontlight, because LCD without that is quite
hard to read.
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adrian Bunk [Tue, 6 Sep 2005 22:16:41 +0000 (15:16 -0700)]
[PATCH] fs/jbd/: cleanups
This patch contains the following cleanups:
- make needlessly global functions static
- journal.c: remove the unused global function __journal_internal_check
and move the check to journal_init
- remove the following write-only global variable:
- journal.c: current_journal
- remove the following unneeded EXPORT_SYMBOL:
- journal.c: journal_recover
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When I first wrote the compat layer patches, I was somewhat cavalier about
the definition of compat_uid_t and compat_gid_t (or maybe I just
misunderstood :-)). This patch makes the compat types much more consistent
with the types we are being compatible with and hopefully will fix a few
bugs along the way.
compat type type in compat arch
__compat_[ug]id_t __kernel_[ug]id_t
__compat_[ug]id32_t __kernel_[ug]id32_t
compat_[ug]id_t [ug]id_t
The difference is that compat_uid_t is always 32 bits (for the archs we
care about) but __compat_uid_t may be 16 bits on some.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bodo Eggert [Tue, 6 Sep 2005 22:16:39 +0000 (15:16 -0700)]
[PATCH] use select in sound/isa/Kconfig
In sound/isa/Kconfig, select ISAPNP and depend on ISAPNP are intermixed,
resulting in funny behaviour. (Soundcarts get selectable if other
soundcards are selected).
This patch changes the "depend on ISAPNP"s to select.
Signed-Off-By: Bodo Eggert <7eggert@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] NMI: Update NMI users of RCU to use new API
Uses of RCU for dynamically changeable NMI handlers need to use the new
rcu_dereference() and rcu_assign_pointer() facilities. This change makes
it clear that these uses are safe from a memory-barrier viewpoint, but the
main purpose is to document exactly what operations are being protected by
RCU. This has been tested on x86 and x86-64, which are the only
architectures affected by this change.
Signed-off-by: <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Tue, 6 Sep 2005 22:16:34 +0000 (15:16 -0700)]
[PATCH] Provide better printk() support for SMP machines
The attached patch prevents oopses interleaving with characters from
other printks on other CPUs by only breaking the lock if the oops is
happening on the machine holding the lock.
It might be better if the oops generator got the lock and then called an
inner vprintk routine that assumed the caller holds the lock, thus
making oops reports "atomic".
Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move some more frequently read variables that showed up during some of our
performance tests as sometimes ending up in hot cachelines to the
read_mostly section.
Fix: Move the __read_mostly from before hpet_usec_quotient to follow the
variable like the other uses of __read_mostly.
Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Christoph Lameter <christoph@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paulo Marques [Tue, 6 Sep 2005 22:16:31 +0000 (15:16 -0700)]
[PATCH] kallsyms: change compression algorithm
This patch changes the way the compression algorithm works. The base
algorithm is similiar to the previous but we force the compressed token
size to 2.
Having a fixed size compressed token allows for a lot of optimizations, and
that in turn allows this code to run over *all* the symbols faster than it
did before over just a subset.
Having it work over all the symbols will make it behave better when symbols
change positions between passes, and the "inconsistent kallsyms" messages
should become less frequent.
In my tests the compression ratio was degraded by about 0.5%, but the
results will depend greatly on the number of symbols to compress.
Signed-off-by: Paulo Marques <pmarques@grupopie.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tom Zanussi [Tue, 6 Sep 2005 22:16:30 +0000 (15:16 -0700)]
[PATCH] relayfs
Here's the latest version of relayfs, against linux-2.6.11-mm2. I'm hoping
you'll consider putting this version back into your tree - the previous
rounds of comment seem to have shaken out all the API issues and the number
of comments on the code itself have also steadily dwindled.
This patch is essentially the same as the relayfs redux part 5 patch, with
some minor changes based on reviewer comments. Thanks again to Pekka
Enberg for those. The patch size without documentation is now a little
smaller at just over 40k. Here's a detailed list of the changes:
- removed the attribute_flags in relay open and changed it to a
boolean specifying either overwrite or no-overwrite mode, and removed
everything referencing the attribute flags.
- added a check for NULL names in relayfs_create_entry()
- got rid of the unnecessary multiple labels in relay_create_buf()
- some minor simplification of relay_alloc_buf() which got rid of a
couple params
- updated the Documentation
In addition, this version (through code contained in the relay-apps tarball
linked to below, not as part of the relayfs patch) tries to make it as easy
as possible to create the cooperating kernel/user pieces of a typical and
common type of logging application, one where kernel logging is kicked off
when a user space data collection app starts and stops when the collection
app exits, with the data being automatically logged to disk in between. To
create this type of application, you basically just include a header file
(relay-app.h, included in the relay-apps tarball) in your kernel module,
define a couple of callbacks and call an initialization function, and on
the user side call a single function that sets up and continuously monitors
the buffers, and writes data to files as it becomes available. Channels
are created when the collection app is started and destroyed when it exits,
not when the kernel module is inserted, so different channel buffer sizes
can be specified for each separate run via command-line options. See the
README in the relay-apps tarball for details.
Also included in the relay-apps tarball are a couple examples
demonstrating how you can use this to create quick and dirty kernel
logging/debugging applications. They are:
- tprintk, short for 'tee printk', which temporarily puts a kprobe on
printk() and writes a duplicate stream of printk output to a relayfs
channel. This could be used anywhere there's printk() debugging code
in the kernel which you'd like to exercise, but would rather not have
your system logs cluttered with debugging junk. You'd probably want
to kill klogd while you do this, otherwise there wouldn't be much
point (since putting a kprobe on printk() doesn't change the output
of printk()). I've used this method to temporarily divert the packet
logging output of the iptables LOG target from the system logs to
relayfs files instead, for instance.
- klog, which just provides a printk-like formatted logging function
on top of relayfs. Again, you can use this to keep stuff out of your
system logs if used in place of printk.
This patch adds a new kernel debug feature: CONFIG_DETECT_SOFTLOCKUP.
When enabled then per-CPU watchdog threads are started, which try to run
once per second. If they get delayed for more than 10 seconds then a
callback from the timer interrupt detects this condition and prints out a
warning message and a stack dump (once per lockup incident). The feature
is otherwise non-intrusive, it doesnt try to unlock the box in any way, it
only gets the debug info out, automatically, and on all CPUs affected by
the lockup.
ATM pthread_cond_signal is unnecessarily slow, because it wakes one waiter
(which at least on UP usually means an immediate context switch to one of
the waiter threads). This waiter wakes up and after a few instructions it
attempts to acquire the cv internal lock, but that lock is still held by
the thread calling pthread_cond_signal. So it goes to sleep and eventually
the signalling thread is scheduled in, unlocks the internal lock and wakes
the waiter again.
Now, before 2003-09-21 NPTL was using FUTEX_REQUEUE in pthread_cond_signal
to avoid this performance issue, but it was removed when locks were
redesigned to the 3 state scheme (unlocked, locked uncontended, locked
contended).
Following scenario shows why simply using FUTEX_REQUEUE in
pthread_cond_signal together with using lll_mutex_unlock_force in place of
lll_mutex_unlock is not enough and probably why it has been disabled at
that time:
The number is value in cv->__data.__lock.
thr1 thr2 thr3
0 pthread_cond_wait
1 lll_mutex_lock (cv->__data.__lock)
0 lll_mutex_unlock (cv->__data.__lock)
0 lll_futex_wait (&cv->__data.__futex, futexval)
0 pthread_cond_signal
1 lll_mutex_lock (cv->__data.__lock)
1 pthread_cond_signal
2 lll_mutex_lock (cv->__data.__lock)
2 lll_futex_wait (&cv->__data.__lock, 2)
2 lll_futex_requeue (&cv->__data.__futex, 0, 1, &cv->__data.__lock)
# FUTEX_REQUEUE, not FUTEX_CMP_REQUEUE
2 lll_mutex_unlock_force (cv->__data.__lock)
0 cv->__data.__lock = 0
0 lll_futex_wake (&cv->__data.__lock, 1)
1 lll_mutex_lock (cv->__data.__lock)
0 lll_mutex_unlock (cv->__data.__lock)
# Here, lll_mutex_unlock doesn't know there are threads waiting
# on the internal cv's lock
Now, I believe it is possible to use FUTEX_REQUEUE in pthread_cond_signal,
but it will cost us not one, but 2 extra syscalls and, what's worse, one of
these extra syscalls will be done for every single waiting loop in
pthread_cond_*wait.
We would need to use lll_mutex_unlock_force in pthread_cond_signal after
requeue and lll_mutex_cond_lock in pthread_cond_*wait after lll_futex_wait.
Another alternative is to do the unlocking pthread_cond_signal needs to do
(the lock can't be unlocked before lll_futex_wake, as that is racy) in the
kernel.
I have implemented both variants, futex-requeue-glibc.patch is the first
one and futex-wake_op{,-glibc}.patch is the unlocking inside of the kernel.
The kernel interface allows userland to specify how exactly an unlocking
operation should look like (some atomic arithmetic operation with optional
constant argument and comparison of the previous futex value with another
constant).
It has been implemented just for ppc*, x86_64 and i?86, for other
architectures I'm including just a stub header which can be used as a
starting point by maintainers to write support for their arches and ATM
will just return -ENOSYS for FUTEX_WAKE_OP. The requeue patch has been
(lightly) tested just on x86_64, the wake_op patch on ppc64 kernel running
32-bit and 64-bit NPTL and x86_64 kernel running 32-bit and 64-bit NPTL.
With the following benchmark on UP x86-64 I get:
for i in nptl-orig nptl-requeue nptl-wake_op; do echo time elf/ld.so --library-path .:$i /tmp/bench; \
for j in 1 2; do echo ( time elf/ld.so --library-path .:$i /tmp/bench ) 2>&1; done; done
time elf/ld.so --library-path .:nptl-orig /tmp/bench
real 0m0.655s user 0m0.253s sys 0m0.403s
real 0m0.657s user 0m0.269s sys 0m0.388s
time elf/ld.so --library-path .:nptl-requeue /tmp/bench
real 0m0.496s user 0m0.225s sys 0m0.271s
real 0m0.531s user 0m0.242s sys 0m0.288s
time elf/ld.so --library-path .:nptl-wake_op /tmp/bench
real 0m0.380s user 0m0.176s sys 0m0.204s
real 0m0.382s user 0m0.175s sys 0m0.207s
The benchmark is at:
http://sourceware.org/ml/libc-alpha/2005-03/txt00001.txt
Older futex-requeue-glibc.patch version is at:
http://sourceware.org/ml/libc-alpha/2005-03/txt00002.txt
Older futex-wake_op-glibc.patch version is at:
http://sourceware.org/ml/libc-alpha/2005-03/txt00003.txt
Will post a new version (just x86-64 fixes so that the patch
applies against pthread_cond_signal.S) to libc-hacker ml soon.
Attached is the kernel FUTEX_WAKE_OP patch as well as a simple-minded
testcase that will not test the atomicity of the operation, but at least
check if the threads that should have been woken up are woken up and
whether the arithmetic operation in the kernel gave the expected results.
This patch adds some missing pci-related calls to the suspend and resume
routines of the 3c59x driver. It also makes the driver free/request IRQ on
suspend/resume, in accordance with the proposal at:
http://lists.osdl.org/pipermail/linux-pm/2005-May/000955.html
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] x86_64: create sysfs entries for cpu only for present cpus
Need to create sysfs only for cpus that are present. Without which we see
NR_CPUS entries created when we have CONFIG_HOTPLUG and CONFIG_HOTPLUG_CPU
enabled.
Eric Dumazet [Tue, 6 Sep 2005 22:16:17 +0000 (15:16 -0700)]
[PATCH] x86_64: prefetchw() can fall back to prefetch() if !3DNOW
This is a multi-part message in MIME format. If the cpu lacks 3DNOW
feature, we can use a normal prefetcht0 instruction instead of NOP5.
"prefetchw (%rxx)" and "prefetcht0 (%rxx)" have the same length, ranging
from 3 to 5 bytes depending on the register. So this patch even helps
AMD64, shortening the length of the code.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Zwane Mwaikambo [Tue, 6 Sep 2005 22:16:16 +0000 (15:16 -0700)]
[PATCH] x86_64: print processor number in show_regs
Up to date I've been using the GS value to determine the processor number
in dumps from show_regs, however this can be cumbersome to do if you don't
have the vmlinux to verify with the address of cpu_pda, how about the
following? I considered using hard_smp_processor_id for robustness but we
already dereference current so we're already relying on MSR_GS_BASE being
sane.
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity
When handling writes to /proc/irq, current code is re-programming rte
entries directly. This is not recommended and could potentially cause
chipset's to lockup, or cause missing interrupts.
CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the
interrupt is pending. The same needs to be done for /proc/irq handling as well.
Otherwise user space irq balancers are really not doing the right thing.
- Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for
lack of a generic name.
- added move_irq out of IRQ_BALANCE, and added this same to X86_64
- Added new proc handler for write, so we can do deferred write at irq
handling time.
- Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead
it now shows only active cpu masks, or exactly what was set.
- Provided a common move_irq implementation, instead of duplicating
when using generic irq framework.
Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off.
Tested UP builds as well.
MSI testing: tbd: I have cards, need to look for a x-over cable, although I
did test an earlier version of this patch. Will test in a couple days.
David Gibson [Tue, 6 Sep 2005 04:59:47 +0000 (14:59 +1000)]
[PATCH] Invert sense of SLB class bit
Currently, we set the class bit in kernel SLB entries, and clear it on
user SLB entries. On POWER5, ERAT entries created in real mode have
the class bit clear. So to avoid flushing kernel ERAT entries on each
context switch, this patch inverts our usage of the class bit, setting
it on user SLB entries and clearing it on kernel SLB entries.
Booted on POWER5 and G5.
Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Al Viro [Tue, 6 Sep 2005 06:35:41 +0000 (23:35 -0700)]
[SPARC64]: Kconfig fix (GEN_RTC dependencies)
Yet another architecture not coverd by GEN_RTC - sparc64 never picked
it until now and it doesn't have asm/rtc.h to go with it, so it
wouldn't compile anyway (or have these ioctls in the user-visible
headers, for that matter).
FWIW, I'm very tempted to introduce ARCH_HAS_GEN_RTC and have it set
in arch/*/Kconfig for architectures that know what to do with this
stuff - for something supposedly generic the list of architectures
where it doesn't work is getting too long...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Tue, 6 Sep 2005 06:30:15 +0000 (23:30 -0700)]
[MOXA]: Fix this driver properly.
Actually, proper fix of that breakage is embarrassingly simple - it's yet
another gratitious leftover include of asm/segment.h, so incremental to the
previos would be removal of that BROKEN and removal of bogus include from
mxser.c itself.
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6 / log