udev segfaults with NULL-pointer, if the device is not in the database:
./test.block: line 29: 4844 Segmentation fault $BIN block
Dec 17 22:47:42 pim udev[4882]: udev_remove_device: '/block/sdy' not found in database, falling back on default name
Dec 17 22:47:42 pim udev[4882]: udev_remove_device: name is '(null)'
Scsi_id hasn't been changed to use the latest libsysfs changes. The
"directory" in the sysfs_class_device is now considered "private" and only
should be accessed using functions. Treating the structures as handles lets
us only load information when it's needed, reducing caching or stale
information and also helping performance.
[PATCH] mark config files as such in the rpm spec file
Got a nasty surprise after upgrading my RPM. The config files weren't
marked as configs and were subsequently replaced! DOH! Fortunately, I
didn't have much in there yet but that certainly isn't something others
will like going forward. Attached is a simple patch to the spec file so
they aren't replaced in the future. The config files included in the
RPM should wind up as udev.conf.rpmnew, etc if they are different from
what is installed.
olh@suse.de [Wed, 17 Dec 2003 07:41:59 +0000 (23:41 -0800)]
[PATCH] dump latest klibc into the udev build tree
KLIBC is used as an internal makefile variable, it expands to either
true or false right now. udev should use something else than KLIBC to
allow build against the latest and greatest klibc version.
[PATCH] don't rely on field order in namedev_parse
o change the parsing to get a key from the rule and sort it
into our list of known keys instead of expecting a special order
o the key to match a sysfs file must be prependend by 'SYSFS_' now
to match with the new parsing.
(The config must be changed, but it's a bit more descriptive too.)
o put names of fields in define's, like the name of the methods
o update all tests and the man page
rml@ximian.com [Wed, 17 Dec 2003 07:30:15 +0000 (23:30 -0800)]
[PATCH] install initscript in udev rpm
Attached patch installs the initscript via 'make install' and adds it to
the RPM package. The RPM script then runs chkconfig(8) to setup the
initscript to run at the appropriate runlevels.
* Make the HW-specific get_unique_id switch pretty
* Prepare to field-test by whitelisting all known fibre array, try to
fetch WWID from the standard EVPD 0x83 off 8 for everyone ... we will
learn from feedback :)
Could you drop a note with the udev-009 release-notes asking for testing
this WWID fetching thing ?
Try this patch if you like, to get special parts of the callout output.
This beast works now:
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n node link1 link2", ID="node *", NAME="%1c", SYMLINK="%2c %3c"
The callout returned string is separated by spaces and is
addressed by the "len" value of the 'c' format char.
Since we support symlinks, this my be useful for other uses of callout too.
introduce 'len number' for format chars
the first use is 'c'-the callout return to select a part of the output string like:
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n node link1 link2", ID="node *", NAME="%1c", SYMLINK="%2c %3c"
(note: first part is requested by len=1, len=0 will return the whole string)
add a test to udev-test.pl
I am sending you a pre-release patch. It's everything that's in our
current CVS tree. It adds the functionality you've been looking for. Please
play with this before checking it into your tree, I'd like to know if
it's ok with you or if you find problems. I have tested this out with
test.all and the perl regression test. Let me know what you think.
Still need to do more testing for our work and add some more functions
related to the changes.
I've gone into namedev.c and udev-add.c to make the necessary changes
in line with the library. I have not gone and edited any of the "extras".
Changes:
1) Libsysfs object structures work more as handles now, their included
directories or devices are labeled private. If you need attributes
from a sysfs_class_device, call the available function and don't access
the directory directly. Same holds true for a sysfs_class_device
sysfs_device. Do not access the link directly but call the function
sysfs_get_classdev_device() instead. We only populate entries upon
request, makes things faster and uses less memory.
2) Added sysfs_get_classdev_parent() as requested.
3) Changed getpagesize to sysconf.
4) Added sysfs_refresh_attributes function for refreshing views of
attribute lists. We still need to add refresh for links and subdirs. All
udev needs to do is keep calling sysfs_get_classdev_attr() and that will
internally call the refresh routine.
As usual, when the stuff gets in the tree - here is a small
man page update and a TODO line removal.
mention multiple symlinks
update example with silly symlink rule :)
shorten example line to have less than 80 chars
remove "want symlink support" from TODO
* configure the multipath target with round-robin path selector and
conservative default for a start : yes it makes this release the first
really useful one.
* temporarily disable map creation for single path device due to current
restrictive defaults in the kernel target. Sistina should work it out.
* correct the strncmp logic in blacklist function.
* update the Makefiles to autodetect libgcc.a & gcc includes
"ulibc-style". Factorisation of udevdirs & others niceties
* drop a hint about absent /dev/sd? on failed open() for poor Debian
users who don't imagine their favorite distro with only 16 preconfigured
SCSI device nodes :)
david@fubar.dk [Mon, 8 Dec 2003 17:19:19 +0000 (09:19 -0800)]
[PATCH] D-BUS patch for udev-008
Attached is a patch against udev-008 to send out a D-BUS message when a
device node is added or removed.
Using D-BUS lingo, udev acquires the org.kernel.udev service and sends
out a NodeCreated or NodeDeleted signal on the
org.kernel.udev.NodeMonitor interface. Each signal carries two
parameters: the node in question and the corresponding sysfs path.
[Note: the D-BUS concepts of service, interface, object can be a bit
confusing at first glance]
An example program listening for these messages looks like this
#!/usr/bin/python
import dbus
import gtk
def udev_signal_received(dbus_iface, member, service, object_path, message):
[filename, sysfs_path] = message.get_args_list()
if member=='NodeCreated':
print 'Node %s created for %s'%(filename, sysfs_path)
elif member=='NodeDeleted':
print 'Node %s deleted for %s'%(filename, sysfs_path)
def main():
bus = dbus.Bus(dbus.Bus.TYPE_SYSTEM)
bus.add_signal_receiver(udev_signal_received,
'org.kernel.udev.NodeMonitor', # interface
'org.kernel.udev', # service
'/org/kernel/udev/NodeMonitor') # object
gtk.mainloop()
if __name__ == '__main__':
main()
and this is the output when hot-plugging some usb-storage.
[david@laptop udev-008]$ ~/node_monitor.py
Node /udev/sda created for /block/sda
Node /udev/sda1 created for /block/sda/sda1
Node /udev/sda1 deleted for /block/sda/sda1
Node /udev/sda deleted for /block/sda
The patch requires D-BUS 0.20 or later while the python example program
requires D-BUS from CVS as I only recently applied a patch against the
python bindings.
> > here is a experimental symlink creation patch - for discussion,
> > in which direction we should go.
> > It is possible now to define SYMLINK= after the NAME= in udev.rules.
> > The link is relative to the node, but the path is not optimized now
> > if the node and the link are in the same nested directory.
> > Only one link is supported, cause i need to sleep now :)
> >
> > 06-simple-symlink-creation.diff
> > simple symlink creation
> > reorganized udev-remove to have access to the symlink field
> > subdir creation/removal are functions now
> > udev-test.pl tests for link creation/removal
Here is a new version with relative link target path optimization
an better tests in udev-test.pl:
[PATCH] better allow builds of extras programs under udev
Here is an improved version of the patch that enables builds of the extras
progams for the targets all, clean, install, and uninstall, and passes
down the "prefix" for use by install and uninstall.
This patch enables building of the "extras" programs using the same build
environment as udev (i.e. build with udev's versions of klibc and
sysfsutils).
* implement a reschedule flag in /var/run. Last thing the prog do before
exit is check if a call to multipath was done (but canceled by
/var/run/multipath.run check) during its execution. If so restart the
main loop.
* implement a blacklist of sysfs bdev to not bother with for now (hd,
md, dm, sr, scd, ram, raw). This avoid sending SG_IO to unappropiate
devices.
here is the next update which brings this multipath to the state i'm not
ashamed of it being in udev :)
* drop a libdevmapper copy in extras/multipath; maybe discussions w/
Sistina folks will bring a better solution in the future.
* drop a putchar usage in libdevmapper to compile cleanly with klibc
* drop another such usage of my own in main.c
* massage the Makefile to compile libdevmapper against klibc
* use "ld" to produce the binary rather than "gcc -static"
* stop being stupid w/ uneeded major, minor & dev in main.c:dm_mk_node()
* reverse to creating striped target for now because the multipath
target is more hairy than expected initialy
* push the version code to 009 to be in synch w/ udev
builds & run here.
binary size is 43ko, which is fairly gratifying after all the efforts
I've put to compiling it with klibc :)
I've never seen any project where the documentation is in sync with the
code at this early stage. Nice! So here is the patch to make it extra perfect :)
remove random indent to be consistent
style is "shell style"
s/wildcard/pattern/
mention negation char in character class
While I was adding pattern match to the LABEL method i hit a bug.
We modify a string returned from libsysfs, so with every iteration is is
truncated by one char:
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-ESXS '
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-ESX' with '?IBM-ESXS'
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-ESX'
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-ES' with 'IBM-ESXS?'
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-ES'
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-E' with 'IBM-ES??'
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-E'
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-' with 'IBM-ESXSS'
I changed the behavior to remove only the line feed.
03-bug-in-linefeed-removal.diff
remove only the line feed from string not every last char
As promised yesterday, here is a patch to implement a more advanced
pattern matching instead of the simple '*'.
We can remove the "tty"="tty" line from udev.rules now and
replace "tty*" by "tty[0-9]*" to catch only the vc's.
implement pattern matching in namedev
'*' - to match zero or more chars
'?' - to match exactly one char
'[]' - character classes with ranges '[0-9]'and negation [!A]
greg@kroah.com [Wed, 3 Dec 2003 09:08:46 +0000 (01:08 -0800)]
[PATCH] add support for a main udev config file, udev.conf.
the older udev.config file is now called udev.rules.
This allows us to better control configuration values, and move away from
the environment variables.
[PATCH] Add -nodefaultlibs while compiling against klibc
This patch adds -nodefaultlibs to LDFLAGS when compiling udev against
klibc. This fixes the warning that I was getting when using $(LD)=gcc
in the versions after Makefile.klibc disappeared. The problem was that
it was still including a "-lc" in the call to the linker.
The quick patch I sent you yesterday fixes it in one location, but
there are other points in the library that calls sysfs_get_mnt_path. We
need to address all the areas in the library where paths are used. The
following patch is a band-aid until we can get a proper path management
in the library.
On Tuesday 25 November 2003 00:12, Chris Larson wrote:
> udev fails to compile here unless I'm doing a KLIBC build. The reason
> appears to be that the normal limits.h in the gcc inc dir doesn't pull
> in linux/limits.h, whereas the limits.h out in the klibc include dirs
> does. I'd think it'd be best to add a #include <linux/limits.h> to
> udev.h directly, since it uses PATH_MAX.
No, don't include kernel headers directly if you can avoid it.
The problem you are referring to seems to be with old tool chains,
I have the same symptom with my s390 gcc-2.95/glibc-2.1.3.
Including <sys/param.h> instead of <limits.h> seems to fix it.
* removes sg_err.[ch] deps
* makes sure the core code play nice with klibc
* port the sysfs calls to dlist helpers
* links against udev's sysfs (need libsysfs.a & dlist.a)
* finally define DM_TARGET as "multipath" as Joe posted the code today
(not tested yet)
* push version forward (do you want it in sync with udev version?)
libdevmapper doesn't play well with klibc, so I wasn't able to produce a
static binary yet. Help needed here ... as I don't want to fall back to
merge libdevmapper code in the core.
There seems to be a
mismatch in udev and in libsysfs as to what to expect if the mnt point
has a slash on the end or not. If I use the included patch, it breaks
something in udev. If I patch sysfs_get_mnt_path I break udev as well
because what you're expecting. I need to sit down and go through
the library and creaate a rule as to trailing slashes. Adding the env
brought this to light.
Here's the patch to up the library to the sysfsutils-0_3_0 level. The
following changes:
1) adds class name to sysfs_class_device structure
2) adds bus to sysfs_device
3) gets rid of code that made assumptions as to bus addresses being
unique across buses, which isn't the case.
I still owe you:
1) change getpagesize->sysconf. This is in the CVS tree and part of other
changes we're currently testing. Patch will follow.
2) you need a function to get a sysfs_class_device's parent. We hadn't
considered class devices to have parents, the one example of a multilevel
is the block class. We will add this function and send the patch to you.
arnd@arndb.de [Tue, 25 Nov 2003 07:41:40 +0000 (23:41 -0800)]
[PATCH] Add format modifier for devfs like naming
On Monday 24 November 2003 01:29, Greg KH wrote:
> I think with the ability to capture the output of the CALLOUT rule,
> combined with the ability to put format modifiers in the CALLOUT program
> string, we now have everything in place to emulate the existing devfs
> naming scheme. Anyone want to verify this or not?
I would prefer to have the ability of creating partition nodes in devfs
style built-in to udev. Devfs used to call the whole disk e.g.
"/dev/dasd/0123/disk" and the partitions "/dev/dasd/0123/part[1-3]".
This can obviously be done with a CALLOUT rule, but its common enough
to make it a format modifier. AFAIK, this scheme has been used for
ide, scsi and dasd disks, which is about 99% of all disks ever connected
to Linux.
udev kept on segfaulting when it was in use, and not having the time
(and building it with DEBUG=true showing nothing), I have not tracked it
until tonight. Seems like I made a type-o, and forgotten the ':'
between one line's group and permission parameters. Attached patch
should stop the segfault, and warn at that at least.
04-udev.8-tweak-numeric-id-text.diff
o change "return value" to "returned string"
o add textual owner/group example for udev.permissions
o mention klibc compile as special case for udev.permissions
o remove duplicated numeric owner clause
projects / systemd / log