Keith Owens [Sat, 28 May 2005 06:09:00 +0000 (23:09 -0700)]
[IA64] Extract correct break number for break.b
break.b does not store the break number in cr.iim, instead it stores 0,
which makes all break.b instructions look like BUG(). Extract the
break number from the instruction itself.
Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Tony Luck [Wed, 8 Jun 2005 19:12:48 +0000 (12:12 -0700)]
[IA64] Update comment to describe modes set in default control register.
Christian Hildner pointed out that the comment did not match what the
code does in cpu_init() when we set up the default control register.
Patch based on suggestions from Ken Chen.
Keith Owens [Mon, 6 Jun 2005 09:04:00 +0000 (02:04 -0700)]
[IA64] Module gp must point to valid memory
Some bits of the kernel assume that gp always points to valid memory,
in particular PHYSICAL_MODE_ENTER() assumes that both gp and sp are
valid virtual addresses with associated physical pages. The IA64
module loader puts gp well past the end of the module, with no physical
backing. Offsets on gp are still valid, but physical mode addressing
breaks for modules. Ensure that gp always falls within the module
body. Also ensure that gp is 8 byte aligned.
Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Kprobes was eating the hardware instruction and data address
breakpoint exceptions. This patch fixes it; kprobes doesn't use those
exceptions at all and should ignore them.
Signed-off-by: Ananth N Mavinakayanahalli <amavin@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Olaf Hering [Wed, 8 Jun 2005 05:12:00 +0000 (15:12 +1000)]
[PATCH] ppc64: print negative numbers correctly in boot wrapper
if num has a value of -1, accessing the digits[] array will fail and the
format string will be printed in funny way, or not at all. This happens if
one prints negative numbers.
Just change the code to match lib/vsprintf.c
asm/div64.h cant be used because u64 maps to u32 for this build.
Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
Russell King [Wed, 8 Jun 2005 14:28:24 +0000 (15:28 +0100)]
[PATCH] ARM: Fix Xscale copy_page implementation
The ARM copypage changes in 2.6.12-rc4-git1 removed the preempt locking
from the copypage functions which broke the XScale implementation.
This patch fixes the locking on XScale and removes the now unneeded
minicache code.
Signed-off-by: Russell King <rmk@arm.linux.org.uk> Checked-by: Richard Purdie
Trond Myklebust [Tue, 7 Jun 2005 22:37:01 +0000 (18:37 -0400)]
[PATCH] NFS: Fix lookup intent handling
We should never apply a lookup intent to anything other than the last
path component in an open(), create() or access() call.
Introduce the helper nfs_lookup_check_intent() which always returns
zero if LOOKUP_CONTINUE or LOOKUP_PARENT are set, and returns the
intent flags if we're on the last component of the lookup.
By doing so, we fix a bug in open(O_EXCL), where we may end up
optimizing away a real lookup of the parent directory.
Problem noticed by Linda Dunaphant <linda.dunaphant@ccur.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Matthew Dobson [Tue, 7 Jun 2005 20:22:05 +0000 (13:22 -0700)]
[PATCH] send_IPI_mask_sequence() warning fix
In file included from arch/i386/kernel/smp.c:235:
include/asm-i386/mach-numaq/mach_ipi.h:4: warning: `send_IPI_mask_sequence'
declared inline after its definition
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Mosberger [Mon, 4 Apr 2005 20:29:43 +0000 (13:29 -0700)]
[PATCH] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0).
[AGPGART] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0).
As mentioned earlier, the current check_bridge_mode() code assumes
that AGP bridges are PCI devices. This isn't always true. Definitely
not for HP zx1 chipset and the same seems to be the case for SGI's AGP
bridge.
The patch below fixes the problem by picking up the AGP_MODE_3_0 bit
from bridge->mode. I feel like I may be missing something, since I
can't see any reason why check_bridge_mode() wasn't doing that in the
first place. According to the AGP 3.0 specs, the AGP_MODE_3_0 bit is
determined during the hardware reset and cannot be changed, so it
seems to me it should be safe to pick it up from bridge->mode.
With the patch applied, I can definitely use AGP acceleration both
with AGP 2.0 and AGP 3.0 (one with an Nvidia card, the other with an
ATI FireGL card).
Unless someone spots a problem, please apply this patch so 3d
acceleration can work on zx1 boxes again.
This makes AGP work again on machines with an AGP bridge that isn't a
PCI device.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com> Signed-off-by: Dave Jones <davej@redhat.com>
Keir Fraser [Wed, 30 Mar 2005 21:17:04 +0000 (13:17 -0800)]
[PATCH] AGP fix for Xen VMM
When Linux is running on the Xen virtual machine monitor, physical
addresses are virtualised and cannot be directly referenced by the AGP
GART. This patch fixes the GART driver for Xen by adding a layer of
abstraction between physical addresses and 'GART addresses'.
Architecture-specific functions are also defined for allocating and freeing
the GATT. Xen requires this to ensure that table really is contiguous from
the point of view of the GART.
These extra interface functions are defined as 'no-ops' for all existing
architectures that use the GART driver.
Signed-off-by: Keir Fraser <keir@xensource.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
David Mosberger [Mon, 6 Jun 2005 22:50:09 +0000 (15:50 -0700)]
[PATCH] Include <linux/config.h> before testing CONFIG_ACPI
I'm not sure why this issue is suddenly showing, but without this
patchlet, the zx1 config won't compile anymore (e.g., to see the
compilation-error, look for "***" in [1]).
Michael Chan [Mon, 6 Jun 2005 22:16:20 +0000 (15:16 -0700)]
[TG3] Fix link failure in 5701
On some 5701 devices with older bootcode, the LED configuration bits in
SRAM may be invalid with value zero. The fix is to check for invalid
bits (0) and default to PHY 1 mode. Incorrect LED mode will lead to
error in programming the PHY.
Thanks to Grant Grundler for debugging the problem.
>From Grant:
| In May, 2004, tg3 v3.4 changed how MAC_LED_CTRL (0x40c) was getting
| programmed and how to determine what to program into LED_CTRL. The new
| code trusted NIC_SRAM_DATA_CFG (0x00000b58) to indicate what to write
| to LED_CTRL and MII EXT_CTRL registers. On "IOX Core Lan", SRAM was
| saying MODE_MAC (0x0) and that doesn't work.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshinori Sato [Mon, 6 Jun 2005 21:46:32 +0000 (14:46 -0700)]
[PATCH] binfmt_flat mmap flag fix
Make sure that binfmt_flat passes the correct flags into do_mmap(). nommu's
validate_mmap_request() will simple return -EINVAL if we try and pass it a
flags value of zero.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:14 +0000 (13:36 -0700)]
[PATCH] namei fixes (19/19)
__do_follow_link() passes potentially worng vfsmount to touch_atime(). It
matters only in (currently impossible) case of symlink mounted on something,
but it's trivial to fix and that actually makes more sense.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:12 +0000 (13:36 -0700)]
[PATCH] namei fixes (16/19)
Conditional mntput() moved into __do_follow_link(). There it collapses with
unconditional mntget() on the same sucker, closing another too-early-mntput()
race.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:11 +0000 (13:36 -0700)]
[PATCH] namei fixes (15/19)
Getting rid of sloppy logics:
a) in do_follow_link() we have the wrong vfsmount dropped if our symlink
had been mounted on something. Currently it worls only because we never
get such situation (modulo filesystem playing dirty tricks on us). And
it obfuscates already convoluted logics...
b) same goes for open_namei().
c) in __link_path_walk() we have another "it should never happen" sloppiness -
out_dput: there does double-free on underlying vfsmount and leaks the covering
one if we hit it just after crossing a mountpoint. Again, wrong vfsmount
getting dropped.
d) another too-early-mntput() race - in do_follow_mount() we need to postpone
conditional mntput(path->mnt) until after dput(path->dentry). Again, this one
happens only in it-currently-never-happens-unless-some-fs-plays-dirty
scenario...
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:08 +0000 (13:36 -0700)]
[PATCH] namei fixes (13/19)
In open_namei() exit_dput: we have mntput() done in the wrong order -
if nd->mnt != path.mnt we end up doing
mntput(nd->mnt);
nd->mnt = path.mnt;
dput(nd->dentry);
mntput(nd->mnt);
which drops nd->dentry too late. Fixed by having path.mnt go first.
That allows to switch O_NOFOLLOW under if (__follow_mount(...)) back
to exit_dput, while we are at it.
Fix for early-mntput() race + equivalent transformation.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:06 +0000 (13:36 -0700)]
[PATCH] namei fixes (10/19)
In open_namei(), __follow_down() loop turned into __follow_mount().
Instead of
if we are on a mountpoint dentry
if O_NOFOLLOW checks fail
drop path.dentry
drop nd
return
do equivalent of follow_mount(&path.mnt, &path.dentry)
nd->mnt = path.mnt
we do
if __follow_mount(path) had, indeed, traversed mountpoint
/* now both nd->mnt and path.mnt are pinned down */
if O_NOFOLLOW checks fail
drop path.dentry
drop path.mnt
drop nd
return
mntput(nd->mnt)
nd->mnt = path.mnt
Now __follow_down() can be folded into follow_down() - no other callers left.
We need to reorder dput()/mntput() there - same problem as in follow_mount().
Equivalent transformation + fix for a bug in O_NOFOLLOW handling - we used to
get -ELOOP if we had the same fs mounted on /foo and /bar, had something bound
on /bar/baz and tried to open /foo/baz with O_NOFOLLOW. And fix of
too-early-mntput() race in follow_down()
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:05 +0000 (13:36 -0700)]
[PATCH] namei fixes (9/19)
New helper: __follow_mount(struct path *path). Same as follow_mount(), except
that we do *not* do mntput() after the first lookup_mnt().
IOW, original path->mnt stays pinned down. We also take care to do dput()
before mntput() in the loop body (follow_mount() also needs that reordering,
but that will be done later in the series).
The following are equivalent, assuming that path.mnt == x:
(1)
follow_mount(&path.mnt, &path.dentry)
(2)
__follow_mount(&path);
if (path->mnt != x)
mntput(x);
(3)
if (__follow_mount(&path))
mntput(x);
Callers of follow_mount() in __link_path_walk() converted to (2).
Equivalent transformation + fix for too-late-mntput() race in __follow_mount()
loop.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:04 +0000 (13:36 -0700)]
[PATCH] namei fixes (8/19)
In open_namei() we never use path.mnt or path.dentry after exit: or ok:.
Assignment of path.dentry in case of LAST_BIND is dead code and only
obfuscates already convoluted function; assignment of path.mnt after
__do_follow_link() can be moved down to the place where we set path.dentry.
Obviously equivalent transformations, just to clean the air a bit in that
region.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Equivalent transformations - the reason why we have that mntget() is that
__do_follow_link() can drop a reference to nd->mnt and that's what holds
path->mnt. So that call can happen at any point prior to __do_follow_link()
touching nd->mnt. The rest is obvious.
NOTE: current tree relies on symlinks *never* being mounted on anything. It's
not hard to get rid of that assumption (actually, that will come for free
later in the series). For now we are just not making the situation worse than
it is.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:01 +0000 (13:36 -0700)]
[PATCH] namei fixes (5/19)
fix for too early mntput() in open_namei() - we pin path.mnt down for the
duration of __do_follow_link(). Otherwise we could get the fs where our
symlink lived unmounted while we were in __do_follow_link(). That would end
up with dentry of symlink staying pinned down through the fs shutdown.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:36:01 +0000 (13:36 -0700)]
[PATCH] namei fixes (4/19)
path.mnt in open_namei() set to mirror nd->mnt.
nd->mnt is set in 3 places in that function - path_lookup() in the beginning,
__follow_down() loop after do_last: and __do_follow_link() call after
do_link:.
We set path.mnt to nd->mnt after path_lookup() and __do_follow_link(). In
__follow_down() loop we use &path.mnt instead of &nd->mnt and set nd->mnt to
path.mnt immediately after that loop.
Obviously equivalent transformation.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 6 Jun 2005 20:35:58 +0000 (13:35 -0700)]
[PATCH] namei fixes
OK, here comes a patch series that hopefully should close all
too-early-mntput() races in fs/namei.c. Entire area is convoluted as hell, so
I'm splitting that series into _very_ small chunks.
Patches alread in the tree close only (very wide) races in following symlinks
(see "busy inodes after umount" thread some time ago). Unfortunately, quite a
few narrower races of the same nature were not closed. Hopefully this should
take care of all of them.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kumar Gala [Mon, 6 Jun 2005 20:35:57 +0000 (13:35 -0700)]
[PATCH] ppc32: Fix incorrect CPU_FTR fixup usage for unified caches
Runtime feature support for unified caches was testing a userland feature
flag (PPC_FEATURE_UNIFIED_CACHE) instead of a cpu feature flag
(CPU_FTR_SPLIT_ID_CACHE). Luckily the current defined bit mask for cpu
features and userland features do not overlap so this only causes an issue
on machines with a unified cache, which is extremely rare on PPC today.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Denis Vlasenko [Mon, 6 Jun 2005 20:35:55 +0000 (13:35 -0700)]
[PATCH] moxa: do not ignore input
Stop using tty internal structure in mxser_receive_chars(), use
tty_insert_flip_char(tty, ch flag); instead.
Without this change driver ignores any rx'ed chars.
Run tested.
Cc: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] broken fault_in_pages_readable call in generic_file_buffered_write()
fault_in_pages_readable() is being passed an incorrect `end' address, which
can result in writes accidentally faulting in pages which will not be affected
by the write() call.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Gerald Schaefer [Sat, 4 Jun 2005 22:43:33 +0000 (15:43 -0700)]
[PATCH] s390: deadlock in appldata
The system might hang when using appldata_mem with high I/O traffic and a
large number of devices. The spinlocks bdev_lock and swaplock are acquired
via calls to si_meminfo() and si_swapinfo() from a tasklet, i.e. interrupt
context, which can lead to a deadlock. Replace tasklet with work queue.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The condition for no context in do_exception checks for hard and soft
interrupts by using in_interrupt() but not for preemption. This is bad for
the users of __copy_from/to_user_inatomic because the fault handler might call
schedule although the preemption count is != 0. Use in_atomic() instead
in_interrupt().
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bodo Stroesser [Sat, 4 Jun 2005 22:43:32 +0000 (15:43 -0700)]
[PATCH] s390: uml ptrace fixes
To make UML build and run on s390, I needed to do these two little
changes:
1) UML includes some of the subarch's (s390) headers. I had to
change one of them with the following one-liner, to make this
compile. AFAICS, this change doesn't break compilation of s390
itself.
2) UML needs to intercept syscalls via ptrace to invalidate the syscall,
read syscall's parameters and write the result with the result of
UML's syscall processing. Also, UML needs to make sure, that the host
does no syscall restart processing. On i386 for example, this can be
done by writing -1 to orig_eax on the 2nd syscall interception
(orig_eax is the syscall number, which after the interception is used
as a "interrupt was a syscall" flag only.
Unfortunately, s390 holds syscall number and syscall result in gpr2 and
its "interrupt was a syscall" flag (trap) is unreachable via ptrace.
So I changed the host to set trap to -1, if the syscall number is changed
to an invalid value on the first syscall interception.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The special cases of peek and poke on acrs[15] and the fpc register are not
handled correctly. A poke on acrs[15] will clobber the 4 bytes after the
access registers in the thread_info structure. That happens to be the kernel
stack pointer. A poke on the fpc with an invalid value is not caught by the
validity check. On the next context switch the broken fpc value will cause a
program check in the kernel. Improving the checks in peek and poke fixes
this.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When fsync() runs wait_on_page_writeback_range() it only inspects pages which
are actually under I/O (PAGECACHE_TAG_WRITEBACK). If a page completed I/O
prior to wait_on_page_writeback_range() looking at it, it is supposed to have
recorded its I/O error state in the address_space.
But mpage_mpage_end_io_write() forgot to set the address_space error flag in
this case.
Deepak Saxena [Fri, 3 Jun 2005 21:18:52 +0000 (22:18 +0100)]
[PATCH] ARM: 2700/1: Disable IXP2000 IRQs at bootup
Patch from Deepak Saxena
The IXDP2800 bootloader does not disable IRQs before jumping into
the kernel and this is causing the Grand Unified KGDB to crash
the system when we do an early call to trap_init() and irq handlers
have not yet been registered. This patch disables IRQs before we
jump into the kernel.
Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Todd Poynor [Fri, 3 Jun 2005 19:52:27 +0000 (20:52 +0100)]
[PATCH] ARM: 2691/1: PXA27x sleep fixes take 2
Patch from Todd Poynor
PXA27x sleep fixes:
* set additional sleep/wakeup registers for Mainstone boards.
* move CKEN=0 to pxa25x-specific code; that value is harmful on pxa27x.
* save/restore additional registers, including some found necessary for
C5 processors and/or newer blob versions.
* enable future support of additional sleep modes for PXA27x (eg,
standby, deep sleep).
* split off cpu-specific sleep processing between pxa27x and pxa25x into
separate files (partly in preparation for additional sleep modes).
Includes fixes from David Burrage.
Signed-off-by: Todd Poynor Signed-off-by: Nicolas Pitre Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Mike Frysinger [Fri, 3 Jun 2005 19:52:26 +0000 (20:52 +0100)]
[PATCH] ARM: 2696/1: remove ';' in ELF_DATA define in asm-arm{,26}/elf.h
Patch from Mike Frysinger
the ELF_DATA define in both arm asm subdirs of linux/include/ contain a
semicolon at the end. this of course will cause any code that tries to use
ELF_DATA in assignment or comparison to fail. no other arch has a semicolon
in their ELF_DATA defines.
Signed-off-by: Mike Frysinger Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Problem:
When a module requests a DMA channel via the function s3c2410_dma_request(), this function requests the appropriate irq under the name of the client module. When the client module is unloaded, it calls s3c2410_dma_free() which does not free the irq. Consequently, when e.g. running "cat /proc/interrupts", the irq owner points to freed memory, leading to a kernel oops.
File:
linux/arch/arm/mach-s3c2410/dma.c
Fix:
trivial, below
Signed-off-by: Albrecht Dreß Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Deepak Saxena [Fri, 3 Jun 2005 19:52:25 +0000 (20:52 +0100)]
[PATCH] ARM: 2692/1: Fix compile warnings in include/asm-arm/arch-ixp2000/io.h
Patch from Deepak Saxena
This patch fixes the following warnings:
include/asm/arch/io.h: In function `insw':
include/asm/arch/io.h:78: warning: comparison of distinct pointer types
lacks acast
include/asm/arch/io.h:79: warning: comparison of distinct pointer types
lacks acast
include/asm/arch/io.h: In function `outsw':
include/asm/arch/io.h:103: warning: comparison of distinct pointer types
lacks a cast
include/asm/arch/io.h:104: warning: comparison of distinct pointer types
lacks a cast
include/asm/arch/io.h: In function `inw':
include/asm/arch/io.h:127: warning: comparison of distinct pointer types
lacks a cast
Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nathan Lynch [Thu, 2 Jun 2005 22:15:09 +0000 (17:15 -0500)]
[SCSI] fix slab corruption during ipr probe
With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on
pSeries machines with IPR adapters with any 2.6.12-rc kernel.
The change which seems to have introduced the problem is "SCSI: revamp
target scanning routines" and may be found at:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2
In order to revert that in a 2.6.12-rc1 tree, I had to revert "target
code updates to support scanned targets" first:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2
With both patches reverted, the corruption messages go away.
I did some digging and the problem seems to be a refcounting issue in
__scsi_add_device. The target gets freed in scsi_target_reap, and
then __scsi_add_device tries to do another device_put on it.
Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Craig Shelley [Thu, 26 May 2005 23:09:56 +0000 (00:09 +0100)]
[PATCH] USB: CP2101 Add support for flow control
Added support to get/set flow control line levels using TIOCMGET and
TIOCMSET.
Added support for RTSCTS hardware flow control.
cp2101_get_config and cp2101_set_config modified to support long request
strings, required for configuring flow control.
Roman Kagan [Thu, 5 May 2005 20:55:56 +0000 (00:55 +0400)]
[PATCH] USB: update urb documentation
On Wed, May 04, 2005 at 01:37:30PM -0700, David Brownell wrote:
> On Wednesday 04 May 2005 12:19 pm, Roman Kagan wrote:
> > struct urb {
> > /* private, usb core and host controller only fields in the urb */
> > ...
> > struct list_head urb_list; /* list pointer to all active urbs */
> > ...
> > };
> >
> > Is it safe to use it for driver's purposes when the driver owns the urb,
> > that is, starting from the completion routine until the urb is submitted
> > with usb_submit_urb()?
>
> Right now, it should be.
Great! FWIW I've briefly tested a modified version of usbatm using
the list head in struct urb instead of creating a wrapper struct, and I
haven't seen any failures yet. So I tend to believe that your "should
be" actually means "is" :)
> > If it is, can it be guaranteed in future, e.g.
> > by moving the list head into the public section of struct urb?
>
> In fact I'm not sure why it ever got called "private" to usbcore/hcds.
> I thought the idea was that it should be like urb->status, reserved for
> whoever controls the URB.
OK then how about the following (essentially documentation) patch?
Signed-off-by: Roman Kagan <rkagan@mail.ru> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Paulo Marques [Wed, 18 May 2005 12:12:49 +0000 (13:12 +0100)]
[PATCH] USB: make MODALIAS code a bit smaller devices
This patch makes the code to provide modalias in sysfs for usb devices
56 bytes smaller in i386, while making it clear that the first part of
the modalias string is the same no matter what the device class is.
Signed-Off-By: Paulo Marques <pmarques@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Matthias Urlichs [Tue, 24 May 2005 00:00:48 +0000 (17:00 -0700)]
[PATCH] USB: add Option Card driver
This patch adds a new driver for "Option" cards. This is a GSM data card,
controlled by three "serial ports" which are connected via an OHCI adapter,
all located on an oversized PC-Card. It's sold by several GSM service
providers.
Traditionally, this card has been accessed via the standard serial driver
and appropriate vendor= and product= options. However, testing has
revealed several problems with this approach, including hung data transfers
and lost data blocks when receiving.
Lonnie Mendez [Tue, 10 May 2005 05:17:17 +0000 (00:17 -0500)]
[PATCH] USB: hid-core: add Earthmate lt-20 productid to blacklist table
This patch adds the DeLorme Earthmate lt-20 productid to the hid
blacklist table. This patch ensures the lt-20 can be claimed by the
appropriate driver (cypress_m8).
Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid
blacklist table.
Jiri Benc [Thu, 2 Jun 2005 23:48:05 +0000 (16:48 -0700)]
[NET]: Fix HH_DATA_OFF.
When the hardware header size is a multiple of HH_DATA_MOD, HH_DATA_OFF()
incorrectly returns HH_DATA_MOD (instead of 0). This affects ieee80211 layer
as 802.11 header is 32 bytes long.
Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
o use a semaphore instead of an opencoded and racy lock
o move locking out of shaper_kick and into the callers - most just
released the lock before calling shaper_kick
o remove in_interrupt() tests. from ->close we can always block, from
->hard_start_xmit and timer context never
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6 / log