Antti Andreimann [Thu, 17 Nov 2005 17:47:53 +0000 (09:47 -0800)]
[PATCH] USB: Maxtor OneTouch button support for older drives
This small patch adds a device ID used by older Maxtor OneTouch drives
(the ones with blue face-plate instead of the fancy silver one used in
newer models). The button on those drives works well with the current
driver.
Andrew Morton [Thu, 17 Nov 2005 17:47:49 +0000 (09:47 -0800)]
[PATCH] usb devio warning fix
drivers/usb/core/devio.c: In function `proc_ioctl_compat':
drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast
Daniel Drake [Thu, 17 Nov 2005 17:48:01 +0000 (09:48 -0800)]
[PATCH] usb-storage: Fix detection of kodak flash readers in shuttle_usbat driver
Peter Favrholdt reported that his Kodak flash device was getting
detected as a CDROM, and he helped me track this down to the fact that
the device takes a long time (approx 440ms!) to reset.
This patch increases the delay to 500ms, which solves the problem.
David Brownell [Thu, 17 Nov 2005 17:47:28 +0000 (09:47 -0800)]
[PATCH] USB: onetouch doesn't suspend yet
The onetouch support doesn't suspend correctly (leaves an interrupt
URB posted, instead of unlinking it) so for now just disable it
when PM is in the air.
Andrew Morton [Thu, 17 Nov 2005 17:47:02 +0000 (09:47 -0800)]
[PATCH] USB: usbdevfs_ioctl 32bit fix
drivers/usb/core/devio.c: In function `proc_ioctl_compat':
drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast
NFI if this is correct...
Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Marcel Holtmann [Thu, 17 Nov 2005 17:46:39 +0000 (09:46 -0800)]
[PATCH] USB: Delete leftovers from bluetty driver
This patch deletes the bluetooth.txt help file of the bluetty driver and
hands over its major device nodes for character devices to the RFCOMM TTY
implementation of the Bluetooth subsystem.
Due to incomplete memory constraints, gcc would miscompile code with
sigaddset on i386 if sig arg was const.
A quote form Jakub to make the issue clear:
"You need either
__asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig-1) : "cc");
or
__asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig-1), "m"(*set) : "cc");
because the btsl instruction doesn't just set the memory to some
value, but needs to read its previous content as well. If you don't
tell that fact to GCC, GCC is of course free to optimize as if the asm
was just setting the value and not depended on the previous value."
Zhu Yi [Thu, 17 Nov 2005 05:58:30 +0000 (13:58 +0800)]
[PATCH] ipw2200: fix error log offset calculation
This fixes a slab corruption issue in the ipw2200 driver: it essentially
multiplied the error log number _twice_ by the size of the error element
entry (once explicitly in the code, and once implicitly as part of the
regular pointer arithmetic).
Cc: Henrik Brix Andersen <brix@gentoo.org> Cc: Bernard Blackham <bernard@blackham.com.au> Cc: Zilvinas Valinskas <zilvinas@gemtek.lt> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
--
Pekka Enberg [Wed, 16 Nov 2005 19:55:05 +0000 (21:55 +0200)]
[PATCH] ipw2200: disallow direct scanning when device is down
The function ipw_request_direct_scan() should bail out when the device
is down. This fixes a lockup caused by wpa_supplicant triggering
ipw_request_direct_scan() while the driver was in a middle of a reset
due to firmware errors.
Thanks to Zilvinas Valinskas for reporting the bug and helping me
debug it.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arnaud Giersch [Sat, 12 Nov 2005 23:38:18 +0000 (00:38 +0100)]
[MIPS] IP32 Fix and complete IP32 parport definitions
Fix, complete, and indent IP32 parport definitions.
Definition were wrong for CTXINUSE and DMACTIVE (1-bit shift).
Add macros DATA_BOUND, DATALEN_SHIFT, and CTRSHIFT.
Ralf Baechle [Tue, 8 Nov 2005 22:36:48 +0000 (22:36 +0000)]
[MIPS] feature-removal-schedule.txt: Schedule au1x00_uart for removal.
The 8250 serial driver now has the ability to deal with the differences
between the standard 8250 family of UARTs and their slightly strange
brother on Alchemy SOCs. The loss of features is not considered an
issue.
Jeff Garzik [Thu, 17 Nov 2005 10:44:44 +0000 (05:44 -0500)]
[libata sata_mv] handle lack of hardware nIEN support
Handle errata (it was unintentional on this h/w, whereas its intentional
on others) whereby the nIEN bit in Device Control is ignored, leading to
a situation where a hardware interrupt completes the qc before the
polling code has a chance to.
This will get fixed The Right Way(tm) once Albert Lee's irq-pio
branch is merged, as the more natural PIO method on this hardware is
interrupt-driven.
Jeff Garzik [Thu, 17 Nov 2005 15:59:48 +0000 (10:59 -0500)]
[libata sata_mv] SATA probe, DMA boundary fixes
- DMA boundary was being handled incorrectly. Copied the code from
ata_fill_sg(), since Marvell has the same DMA boundary needs.
(we can't use ata_fill_sg directly since we have different hardware
descriptors)
- cleaned up the SATA phy reset code, to deal with various errata
Patrick McHardy [Thu, 17 Nov 2005 07:14:19 +0000 (23:14 -0800)]
[NETFILTER]: Fix nf_conntrack compilation with CONFIG_NETFILTER_DEBUG
CC [M] net/netfilter/nf_conntrack_core.o
net/netfilter/nf_conntrack_core.c: In function 'nf_ct_unlink_expect':
net/netfilter/nf_conntrack_core.c:390: error: 'exp_timeout' undeclared (first use in this function)
net/netfilter/nf_conntrack_core.c:390: error: (Each undeclared identifier is reported only once
net/netfilter/nf_conntrack_core.c:390: error: for each function it appears in.)
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Yasuyuki Kozakai [Wed, 16 Nov 2005 20:55:37 +0000 (12:55 -0800)]
[IPV4,IPV6]: replace handmade list with hlist in IPv{4,6} reassembly
Both of ipq and frag_queue have *next and **prev, and they can be replaced
with hlist. Thanks Arnaldo Carvalho de Melo for the suggestion.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 16 Nov 2005 18:36:49 +0000 (18:36 +0000)]
[ARM] No need to include asm/proc-fns.h into asm/system.h
In the old days when arm26/arm32 was combined into the same
architecture, proc-fns.h provided the xchg implementation for
arm26 CPUs. Since we no longer combine these two, this include
is no longer required. Remove it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 16 Nov 2005 18:03:10 +0000 (18:03 +0000)]
[ARM] Use unsigned long not u32 in atomic_cmpxchg
Since atomic.h does not include types.h, u32 may not be defined.
Since atomics are supposed to work on unsigned long quantities,
use unsigned long instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 16 Nov 2005 17:38:40 +0000 (17:38 +0000)]
[ARM] Move zone adjustment for SA1111 on SA11x0 platforms
Unfortunately, using PAGE_SHIFT in asm/arch/memory.h is unsafe, and we
can't include asm/page.h into this file because then we have a circular
dependency. Move the offending code to arch/arm/common/sa1111.c
instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 16 Nov 2005 17:23:57 +0000 (17:23 +0000)]
[ARM] Add linux/compiler.h includes where required
atomic.h, bitops.h and mmu_context.h are using likely/unlikely.
thread_info.h uses __attribute_const__. Hence these files require
linux/compiler.h to be included.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nicolas Pitre [Wed, 16 Nov 2005 15:05:11 +0000 (15:05 +0000)]
[ARM] 3165/1: fix atomic_cmpxchg() implementation for ARMv6+
Patch from Nicolas Pitre
If 'old' and 'oldval' are different then 'res' never gets set. In that
case, if ever %0 happened to contain anything but zero (rather likely)
then the code will loop forever (or until another CPU just come along
and change the atomic value to match 'old' which is rather unlikely).
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 16 Nov 2005 14:59:51 +0000 (14:59 +0000)]
[ARM] compressed/head.S debugging defaults to asm/arch/debug-macro.S
Since we want new platforms to use debug-macro.S, make the decompressor
debugging method default to using this include file rather than having
new platforms add to an #if defined().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Albert Lee [Wed, 16 Nov 2005 09:06:18 +0000 (17:06 +0800)]
[PATCH] libata: honor the transfer cycle time speficied by the EIDE device
The following code segment is not functional because the transfer cycle time speficied by
the EIDE device is later overwritten by ata_timing_quantize():
/*
* If the drive is an EIDE drive, it can tell us it needs extended
* PIO/MW_DMA cycle timing.
*/
if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
(snip)
ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
<== uninitialized "t" is used here
}
/*
* Convert the timing to bus clock counts.
*/
ata_timing_quantize(s, t, T, UT); <== t is overwritten by quantized s
The patch has been submitted for ide-timing.h before:
http://marc.theaimsgroup.com/?l=linux-ide&m=110820013425454&w=2
Resubmitted for libata.
Changes:
- Minor fix to honor the following transfer cycle time speficied by the device
- id[65]: Minimum Multiword DMA transfer cycle time per word
- id[67]: Minimum PIO transfer cycle time without flow control
- id[68]: Minimum PIO transfer cycle time with IORDY
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
======= Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[PATCH] powerpc: Make the vDSO functions set error code (#2)
The vDSO functions should have the same calling convention as a syscall.
Unfortunately, they currently don't set the cr0.so bit which is used to
indicate an error. This patch makes them clear this bit unconditionally
since all functions currently succeed. The syscall fallback done by some
of them will eventually override this if the syscall fails.
This also changes the symbol version of all vdso exports to make sure
glibc can differenciate between old and fixed calls for existing ones
like __kernel_gettimeofday.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Wed, 16 Nov 2005 02:38:21 +0000 (13:38 +1100)]
powerpc: Move ppc64 boot wrapper code over to arch/powerpc
This also extends the code to handle 32-bit ELF vmlinux files as well
as 64-bit ones. This is sufficient for booting on new-world 32-bit
powermacs (i.e. all recent machines).
The merge of machine types broke boot with yaboot & ARCH=ppc due to the
old code still retreiving the old-syle machine type passed in by yaboot.
This patch fixes it by translating those old numbers. Since that whole
mecanism is deprecated, this is a temporary fix until ARCH=ppc uses the
new prom_init that the merged architecture now uses for both ppc32 and
ppc64 (after 2.6.15)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Guido Guenther [Tue, 15 Nov 2005 06:28:05 +0000 (17:28 +1100)]
[PATCH] PowerBook 6,1: headphone not detected after suspend
ever since suspend to disk works I had the problem that headphone
(un)plugging doesn't get detected properly anymore after the first
resume.
Reloading the module worked around this ever since, however the real
cause of the problem was that after a resume the driver only got
interrupts on "unplug" not on "plug". Reactivating the headphone status
interrupt in tumbler_resume fixes this. This shouldn't cause
any trouble with software suspend, but it would be nice if somebody
could confirm this:
Signed-off-by: Guido Guenther <agx@sigxcpu.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
I discovered that in some cases (PowerMac for example) we wouldn't
properly map the PCI IO space on recent kernels. In addition, the code
for initializing PCI host bridges was scattered all over the place with
some duplication between platforms.
This patch fixes the problem and does a small cleanup by creating a
pcibios_alloc_controller() in pci_64.c that is similar to the one in
pci_32.c (just takes an additional device node argument) that takes care
of all the grunt allocation and initialisation work. It should work for
both boot time and dynamically allocated PHBs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
My patch moving ppc64 RTC to genrtc was supposed to update all
defconfigs, but for some reason, the patch actually posted only had the
pseries one... ouch. This patch properly updates all defconfigs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Currently 8xx fails to boot due to endless pagefaults.
Seems the bug is exposed by the change which avoids flushing the
TLB when not necessary (in case the pte has not changed), introduced
recently:
__handle_mm_fault():
entry = pte_mkyoung(entry);
if (!pte_same(old_entry, entry)) {
ptep_set_access_flags(vma, address, pte, entry, write_access);
update_mmu_cache(vma, address, entry);
lazy_mmu_prot_update(entry);
} else {
/*
* This is needed only for protection faults but the arch code
* is not yet telling us if this is a protection fault or not.
* This still avoids useless tlb flushes for .text page faults
* with threads.
*/
if (write_access)
flush_tlb_page(vma, address);
}
The "update_mmu_cache()" call was unconditional before, which caused the TLB
to be flushed by:
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
if (!PageReserved(page)
&& !test_bit(PG_arch_1, &page->flags)) {
if (vma->vm_mm == current->active_mm) {
#ifdef CONFIG_8xx
/* On 8xx, cache control instructions (particularly
* "dcbst" from flush_dcache_icache) fault as write
* operation if there is an unpopulated TLB entry
* for the address in question. To workaround that,
* we invalidate the TLB here, thus avoiding dcbst
* misbehaviour.
*/
_tlbie(address);
#endif
__flush_dcache_icache((void *) address);
} else
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
}
Which worked to due to pure luck: PG_arch_1 was always unset before, but
now it isnt.
The root of the problem are the changes against the 8xx TLB handlers introduced
during v2.6. What happens is the TLBMiss handlers load the zeroed pte into
the TLB, causing the TLBError handler to be invoked (thats two TLB faults per
pagefault), which then jumps to the generic MM code to setup the pte.
The bug is that the zeroed TLB is not invalidated (the same reason
for the "dcbst" misbehaviour), resulting in infinite TLBError faults.
The "two exception" approach requires a TLB flush (to nuke the zeroed TLB)
at each PTE update for correct behaviour:
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch should fix the crashes we have been seeing on 64-bit
powerpc systems with a memory hole when sparsemem is enabled.
I'd appreciate it if people who know more about NUMA and sparsemem
than me could look over it.
There were two bugs. The first was that if NUMA was enabled but there
was no NUMA information for the machine, the setup_nonnuma() function
was adding a single region, assuming memory was contiguous. The
second was that the loops in mem_init() and show_mem() assumed that
all pages within the span of a pgdat were valid (had a valid struct
page).
I also fixed the incorrect setting of num_physpages that Mike Kravetz
pointed out.
Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
KOVACS Krisztian [Wed, 16 Nov 2005 00:47:34 +0000 (16:47 -0800)]
[NETFILTER] Free layer-3 specific protocol tables at cleanup
Although the comment around the allocation code tells us that
the layer-3 specific protocol tables will be freed when cleaning up,
they aren't. And this makes nfsim complain loudly...
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
KOVACS Krisztian [Wed, 16 Nov 2005 00:47:09 +0000 (16:47 -0800)]
[NETFILTER] Remove nf_conntrack stat proc file when cleaning up
Fix nf_conntrack statistics proc file removal. Looks like the old bug
was forward-ported from ip_conntrack. :-]
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Chen, Kenneth W [Tue, 15 Nov 2005 22:37:05 +0000 (14:37 -0800)]
[PATCH] ia64: cpu_idle performance bug fix
Our performance validation on 2.6.15-rc1 caught a disastrous performance
regression on ia64 with netperf (-98%) and volanomark (-58%) compares to
previous kernel version 2.6.14-git7. See the following chart (result
group 1 & 2).
This changeset broke the ia64 task resched notification. In
sched.c:resched_task(), a reschedule IPI is conditioned upon
TIF_POLLING_NRFLAG. However, the above changeset unconditionally set
the polling thread flag for idle tasks regardless whether pal_halt_light
is in use or not. As a result, resched IPI is not sent from
resched_task(). And since the default behavior on ia64 is to use
pal_halt_light, we end up delaying the rescheduling task until next
timer tick, and thus cause the performance regression.
This fixes the performance bug. I'm glad our performance suite is
turning up bad performance bug like this in time.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6 / log