]> err.no Git - linux-2.6/log
linux-2.6
16 years ago[NETFILTER]: {ip,ip6,arp}_tables: consolidate iterator macros
Patrick McHardy [Tue, 18 Dec 2007 05:46:59 +0000 (21:46 -0800)]
[NETFILTER]: {ip,ip6,arp}_tables: consolidate iterator macros

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETFILTER]: x_tables: make xt_compat_match_from_user usable in iterator macros
Patrick McHardy [Tue, 18 Dec 2007 05:46:40 +0000 (21:46 -0800)]
[NETFILTER]: x_tables: make xt_compat_match_from_user usable in iterator macros

Make xt_compat_match_from_user return an int to make it usable in the
*tables iterator macros and kill a now unnecessary wrapper function.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETFILTER]: ip_tables: reformat compat code
Patrick McHardy [Tue, 18 Dec 2007 05:46:15 +0000 (21:46 -0800)]
[NETFILTER]: ip_tables: reformat compat code

The compat code has some very odd formating, clean it up before porting
it to ip6_tables.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETFILTER]: ip_tables: kill useless wrapper
Patrick McHardy [Tue, 18 Dec 2007 05:45:52 +0000 (21:45 -0800)]
[NETFILTER]: ip_tables: kill useless wrapper

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agowireless: make drivers include the TSF RX flag where appropriate
Johannes Berg [Tue, 4 Dec 2007 19:33:40 +0000 (20:33 +0100)]
wireless: make drivers include the TSF RX flag where appropriate

These drivers pass full mactime information to the stack, make them
indicate this via the new RX_FLAG_TSFT to get mac80211 to show this
information in monitor mode.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agointroduce WEXT scan capabilities
Dan Williams [Wed, 12 Dec 2007 15:25:07 +0000 (10:25 -0500)]
introduce WEXT scan capabilities

Introduce scan capabilities to WEXT so that userspace can do intelligent
things with scan behavior such as handling hidden SSIDs more gracefully.
If the driver reports a specific scan capability, the driver must
respect the options specified in the iw_scan_req structure when handling
the SIOCSIWSCAN call, unless it's mode or state does not allow it to do
so, in which case it must return an error.

This version switches to Dave Kilroy's suggestion of claiming unused
padding space for the scan_capa field.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agomac80211: conditionally include timestamp in radiotap information
Johannes Berg [Tue, 11 Dec 2007 20:33:42 +0000 (21:33 +0100)]
mac80211: conditionally include timestamp in radiotap information

This makes mac80211 include the low-level MAC timestamp
in the radiotap header if the driver indicated (by a new
RX flag) that the timestamp is valid.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Remove unused inline function
Gerrit Renker [Mon, 17 Dec 2007 14:58:04 +0000 (12:58 -0200)]
[DCCP]: Remove unused inline function

The function follows48(), which is a special-case of dccp_delta_seqno(),
is nowhere used in the DCCP code, thus removed by this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[CCID3]: Nofeedback timer according to rfc3448bis
Gerrit Renker [Mon, 17 Dec 2007 14:57:43 +0000 (12:57 -0200)]
[CCID3]: Nofeedback timer according to rfc3448bis

This implements the changes to the nofeedback timer handling suggested
in draft rfc3448bis00, section 4.4. In particular, these changes mean:

 * better handling of the lossless case (p == 0)
 * the timestamp for computing t_ld becomes obsolete
 * much more recent document (RFC 3448 is almost 5 years old)
 * concepts in rfc3448bis arose from a real, working implementation
   (cf. sec. 12)

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[CCID3]: Implement rfc3448bis changes to feedback reception
Gerrit Renker [Mon, 17 Dec 2007 14:48:47 +0000 (12:48 -0200)]
[CCID3]: Implement rfc3448bis changes to feedback reception

This implements the algorithm to update the allowed sending rate X upon
receiving feedback packets, as described in draft rfc3448bis, 4.2/4.3.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[CCID3]: Remove two irrelevant states in TX feedback handling
Gerrit Renker [Mon, 17 Dec 2007 12:25:06 +0000 (10:25 -0200)]
[CCID3]: Remove two irrelevant states in TX feedback handling

 * the NO_SENT state is only triggered in bidirectional mode,
   costing unnecessary processing.
 * the TERM (terminating) state is irrelevant.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[CCID3]: Use a function to update p_inv, and p is never used
Gerrit Renker [Mon, 17 Dec 2007 12:07:44 +0000 (10:07 -0200)]
[CCID3]: Use a function to update p_inv, and p is never used

This patch
 1) concentrates previously scattered computation of p_inv into one function;
 2) removes the `p' element of the CCID3 RX sock (it is redundant);
 3) makes the tfrc_rx_info structure standalone, only used on demand.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[PARISC]: Fix build after ipv4_is_*() changes.
Joe Perches [Mon, 17 Dec 2007 04:28:24 +0000 (20:28 -0800)]
[PARISC]: Fix build after ipv4_is_*() changes.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: Use crc32c library for checksum calculations.
Vlad Yasevich [Sun, 16 Dec 2007 22:06:41 +0000 (14:06 -0800)]
[SCTP]: Use crc32c library for checksum calculations.

The crc32c library used an identical table and algorithm
as SCTP.  Switch to using the library instead of carrying
our own table.  Using crypto layer proved to have too
much overhead compared to using the library directly.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[PACKET]: Fix /proc/net/packet crash due to bogus private pointer
Herbert Xu [Sun, 16 Dec 2007 22:04:02 +0000 (14:04 -0800)]
[PACKET]: Fix /proc/net/packet crash due to bogus private pointer

The seq_open_net patch changed the meaning of seq->private.
Unfortunately it missed two spots in AF_PACKET, which still
used the old way of dereferencing seq->private, thus causing
weird and wonderful crashes when reading /proc/net/packet.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Remove unused IPV4TYPE macros
Joe Perches [Sun, 16 Dec 2007 21:48:11 +0000 (13:48 -0800)]
[IPV4]: Remove unused IPV4TYPE macros

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] drivers/infiniband: Use ipv4_is_<type>
Joe Perches [Sun, 16 Dec 2007 21:47:33 +0000 (13:47 -0800)]
[IPV4] drivers/infiniband: Use ipv4_is_<type>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] sctp: Use ipv4_is_<type>
Joe Perches [Sun, 16 Dec 2007 21:46:59 +0000 (13:46 -0800)]
[IPV4] sctp: Use ipv4_is_<type>

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] net/netfilter: Use ipv4_is_<type>
Joe Perches [Sun, 16 Dec 2007 21:46:15 +0000 (13:46 -0800)]
[IPV4] net/netfilter: Use ipv4_is_<type>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] net/ipv4: Use ipv4_is_<type>
Joe Perches [Sun, 16 Dec 2007 21:45:43 +0000 (13:45 -0800)]
[IPV4] net/ipv4: Use ipv4_is_<type>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] net/core: Use ipv4_is_<type>
Joe Perches [Sun, 16 Dec 2007 21:44:00 +0000 (13:44 -0800)]
[IPV4] net/core: Use ipv4_is_<type>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4] include/net: Use ipv4_is_<type>
Joe Perches [Sun, 16 Dec 2007 21:43:24 +0000 (13:43 -0800)]
[IPV4] include/net: Use ipv4_is_<type>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Create ipv4_is_<type>(__be32 addr) functions
Joe Perches [Sun, 16 Dec 2007 21:42:49 +0000 (13:42 -0800)]
[IPV4]: Create ipv4_is_<type>(__be32 addr) functions

Change IPV4 specific macros LOOPBACK MULTICAST LOCAL_MCAST BADCLASS
and ZERONET macros to inline functions ipv4_is_<type>(__be32 addr)

Adds type safety and arguably some readability.

Changes since last submission:

Removed ipv4_addr_octets function
Used hex constants
Converted recently added rfc3330 macros

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Switch users of ipv4_devconf(_all) to use the pernet one
Pavel Emelyanov [Sun, 16 Dec 2007 21:32:48 +0000 (13:32 -0800)]
[IPV4]: Switch users of ipv4_devconf(_all) to use the pernet one

These are scattered over the code, but almost all the
"critical" places already have the proper struct net
at hand except for snmp proc showing function and routing
rtnl handler.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Switch users of ipv4_devconf_dflt to use the pernet one
Pavel Emelyanov [Sun, 16 Dec 2007 21:32:16 +0000 (13:32 -0800)]
[IPV4]: Switch users of ipv4_devconf_dflt to use the pernet one

They are all collected in the net/ipv4/devinet.c file and
mostly use the IPV4_DEVCONF_DFLT macro.

So I add the net parameter to it and patch users accordingly.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Move the devinet pointers on the struct net
Pavel Emelyanov [Sun, 16 Dec 2007 21:31:47 +0000 (13:31 -0800)]
[IPV4]: Move the devinet pointers on the struct net

This is the core.

Add all and default pointers on the netns_ipv4 and register
a new pernet subsys to initialize them.

Also add the ctl_table_header to register the
net.ipv4.ip_forward ctl.

I don't allocate additional memory for init_net, but use
global devinets.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Store the net pointer on devinet's ctl tables
Pavel Emelyanov [Sun, 16 Dec 2007 21:31:14 +0000 (13:31 -0800)]
[IPV4]: Store the net pointer on devinet's ctl tables

Some handers and strategies of devinet sysctl tables need
to know the net to propagate the ctl change to all the
net devices.

I use the (currently unused) extra2 pointer on the tables
to get it.

Holding the reference on the struct net is not possible,
because otherwise we'll get a net->ctl_table->net circular
dependency. But since the ctl tables are unregistered during
the net destruction, this is safe to get it w/o additional
protection.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Pass the net pointer to the arp_req_set_proxy()
Pavel Emelyanov [Sun, 16 Dec 2007 21:30:39 +0000 (13:30 -0800)]
[IPV4]: Pass the net pointer to the arp_req_set_proxy()

This one will need to set the IPV4_DEVCONF_ALL(PROXY_ARP), but
there's no ways to get the net right in place, so we have to
pull one from the inet_ioctl's struct sock.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Make __devinet_sysctl_register return an error
Pavel Emelyanov [Sun, 16 Dec 2007 21:30:07 +0000 (13:30 -0800)]
[IPV4]: Make __devinet_sysctl_register return an error

Currently, this function is void, so failures in creating
sysctls for new/renamed devices are not reported to anywhere.

Fixing this is another complex (needed?) task, but this
return value is needed during the namespaces creation to
handle the case, when we failed to create "all" and "default"
entries.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETNS]: Add the netns_ipv4 struct
Pavel Emelyanov [Sun, 16 Dec 2007 21:29:36 +0000 (13:29 -0800)]
[NETNS]: Add the netns_ipv4 struct

The ipv4 will store its parameters inside this structure.
This one is empty now, but it will be eventually filled.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[XFRM]: Fix potential race vs xfrm_state(only)_find and xfrm_hash_resize.
Pavel Emelyanov [Fri, 14 Dec 2007 19:38:04 +0000 (11:38 -0800)]
[XFRM]: Fix potential race vs xfrm_state(only)_find and xfrm_hash_resize.

The _find calls calculate the hash value using the
xfrm_state_hmask, without the xfrm_state_lock. But the
value of this mask can change in the _resize call under
the state_lock, so we risk to fail in finding the desired
entry in hash.

I think, that the hash value is better to calculate
under the state lock.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[PPP] synchronous tty: convert dead_sem to completion
Matthias Kaehlcke [Fri, 14 Dec 2007 19:32:48 +0000 (11:32 -0800)]
[PPP] synchronous tty: convert dead_sem to completion

PPP synchronous tty channel driver: convert the semaphore dead_sem to a
completion

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[UDP]: Move udp_stats_in6 into net/ipv4/udp.c
Herbert Xu [Fri, 14 Dec 2007 19:25:26 +0000 (11:25 -0800)]
[UDP]: Move udp_stats_in6 into net/ipv4/udp.c

Now that external users may increment the counters directly, we need
to ensure that udp_stats_in6 is always available.  Otherwise we'd
either have to requrie the external users to be built as modules or
ipv6 to be built-in.

This isn't too bad because udp_stats_in6 is just a pair of pointers
plus an EXPORT, e.g., just 40 (16 + 24) bytes on x86-64.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SUNRPC]: Use htonl() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:55:42 +0000 (03:55 +0900)]
[SUNRPC]: Use htonl() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[RXRPC]: Use cpu_to_be32() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:55:22 +0000 (03:55 +0900)]
[RXRPC]: Use cpu_to_be32() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[MAC80211]: Use htons() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:54:23 +0000 (03:54 +0900)]
[MAC80211]: Use htons() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IRDA]: Use htons() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:53:26 +0000 (03:53 +0900)]
[IRDA]: Use htons() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPVS]: Use htons() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:53:11 +0000 (03:53 +0900)]
[IPVS]: Use htons() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IEEE80211]: Use htons() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:52:26 +0000 (03:52 +0900)]
[IEEE80211]: Use htons() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DECNET]: Use htons() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:51:49 +0000 (03:51 +0900)]
[DECNET]: Use htons() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BRIDGE]: Use cpu_to_be16() where appropriate.
YOSHIFUJI Hideaki [Tue, 11 Dec 2007 18:51:03 +0000 (03:51 +0900)]
[BRIDGE]: Use cpu_to_be16() where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Introducing CCMPS
Gerrit Renker [Fri, 14 Dec 2007 01:37:55 +0000 (23:37 -0200)]
[DCCP]: Introducing CCMPS

This introduces a CCMPS field for setting a CCID-specific upper bound on the application payload
size, as is defined in RFC 4340, section 14.

Only the TX CCID is considered in setting this limit, since the RX CCID generates comparatively
small (DCCP-Ack) feedback packets. The CCMPS field includes network and transport layer header
lengths. The only current CCMPS customer is CCID4 (via RFC 4828).

A wrapper is used to allow querying the CCMPS even at times where the CCID modules may not have
been fully negotiated yet.

In dccp_sync_mss() the variable `mss_now' has been renamed into `cur_mps', to reflect that we are
dealing with an MPS, but not an MSS.
Since the DCCP code closely follows the TCP code, the identifiers `dccp_sync_mss' and
`dccps_mss_cache' have been kept, as they have direct TCP counterparts.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[CCID]: More informative registration
Gerrit Renker [Fri, 14 Dec 2007 01:33:25 +0000 (23:33 -0200)]
[CCID]: More informative registration

The patch makes the registration messages of CCID 2/3 a bit more
informative: instead of repeating the CCID number as currently done,

        "CCID: Registered CCID 2 (ccid2)"  or
        "CCID: Registered CCID 3 (ccid3)",

the descriptive names of the CCID's (from RFCs) are now used:

"CCID: Registered CCID 2 (TCP-like)" and
"CCID: Registered CCID 3 (TCP-Friendly Rate Control)".

To allow spaces in the name, the slab name string has been changed to
refer to the numeric CCID identifier, using the same format as before.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Documentation for CCID operations
Gerrit Renker [Fri, 14 Dec 2007 01:31:14 +0000 (23:31 -0200)]
[DCCP]: Documentation for CCID operations

This adds documentation for the ccid_operations structure.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Thresholds in fib_trie.c are used as consts, so make them const.
Denis V. Lunev [Thu, 13 Dec 2007 17:47:57 +0000 (09:47 -0800)]
[IPV4]: Thresholds in fib_trie.c are used as consts, so make them const.

There are several thresholds for trie fib hash management. They are used
in the code as a constants. Make them constants from the compiler point of
view.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6] sit: Rebinding of SIT tunnels to other interfaces
Michal Schmidt [Thu, 13 Dec 2007 17:47:00 +0000 (09:47 -0800)]
[IPV6] sit: Rebinding of SIT tunnels to other interfaces

This is similar to the change already done for IPIP tunnels.

Once created, a SIT tunnel can't be bound to another device.
To reproduce:

# create a tunnel:
ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0
# try to change the bounding device from eth0 to eth1:
ip tunnel change tunneltest0 dev eth1
# show the result:
ip tunnel show tunneltest0

tunneltest0: ipv6/ip  remote 10.0.0.1  local any  dev eth0  ttl inherit

Notice the bound device has not changed from eth0 to eth1.

This patch fixes it. When changing the binding, it also recalculates the
MTU according to the new bound device's MTU.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IP_GRE]: Rebinding of GRE tunnels to other interfaces
Michal Schmidt [Thu, 13 Dec 2007 17:46:32 +0000 (09:46 -0800)]
[IP_GRE]: Rebinding of GRE tunnels to other interfaces

This is similar to the change already done for IPIP tunnels.

Once created, a GRE tunnel can't be bound to another device.
To reproduce:

# create a tunnel:
ip tunnel add tunneltest0 mode gre remote 10.0.0.1 dev eth0
# try to change the bounding device from eth0 to eth1:
ip tunnel change tunneltest0 dev eth1
# show the result:
ip tunnel show tunneltest0

tunneltest0: gre/ip  remote 10.0.0.1  local any  dev eth0  ttl inherit

Notice the bound device has not changed from eth0 to eth1.

This patch fixes it. When changing the binding, it also recalculates the
MTU according to the new bound device's MTU.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: Always pass a valid nl_info to inet6_rt_notify.
Denis V. Lunev [Thu, 13 Dec 2007 17:45:12 +0000 (09:45 -0800)]
[IPV6]: Always pass a valid nl_info to inet6_rt_notify.

This makes the code in the inet6_rt_notify more straightforward and provides
groud for namespace passing.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPSEC]: Fix zero return value in xfrm_lookup on error
Herbert Xu [Thu, 13 Dec 2007 17:30:59 +0000 (09:30 -0800)]
[IPSEC]: Fix zero return value in xfrm_lookup on error

Further testing shows that my ICMP relookup patch can cause xfrm_lookup
to return zero on error which isn't very nice since it leads to the caller
dying on null pointer dereference.  The bug is due to not setting err
to ENOENT just before we leave xfrm_lookup in case of no policy.

This patch moves the err setting to where it should be.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Ignore feature negotiation on Data packets
Gerrit Renker [Thu, 13 Dec 2007 14:48:19 +0000 (12:48 -0200)]
[DCCP]: Ignore feature negotiation on Data packets

This implements [RFC 4340, p. 32]: "any feature negotiation options received
on DCCP-Data packets MUST be ignored".

Also added a FIXME for further processing, since the code currently (wrongly)
classifies empty Confirm options as invalid - this needs to be resolved in
a separate patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Make code assumptions explicit
Gerrit Renker [Thu, 13 Dec 2007 14:41:46 +0000 (12:41 -0200)]
[DCCP]: Make code assumptions explicit

This removes several `XXX' references which indicate a missing support
for non-1-byte feature values: this is unnecessary, as all currently known
(standardised) SP feature values are 1-byte quantities.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Remove unused and redundant validation functions
Gerrit Renker [Thu, 13 Dec 2007 14:40:40 +0000 (12:40 -0200)]
[DCCP]: Remove unused and redundant validation functions

This removes two inlines which were both called in a single function only:

 1) dccp_feat_change() is always called with either DCCPO_CHANGE_L or DCCPO_CHANGE_R as argument
    * from dccp_set_socktopt_change() via do_dccp_setsockopt() with DCCP_SOCKOPT_CHANGE_R/L
    * from __dccp_feat_init() via dccp_feat_init() also with DCCP_SOCKOPT_CHANGE_R/L.

    Hence the dccp_feat_is_valid_type() is completely unnecessary and always returns true.

 2) Due to (1), the length test reduces to 'len >= 4', which in turn makes
    dccp_feat_is_valid_length() unnecessary.

Furthermore, the inline function dccp_feat_is_reserved() was unfolded,
since only called in a single place.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Support inserting options during the 3-way handshake
Gerrit Renker [Thu, 13 Dec 2007 14:38:11 +0000 (12:38 -0200)]
[DCCP]: Support inserting options during the 3-way handshake

This provides a separate routine to insert options during the initial handshake.
The main purpose is to conduct feature negotiation, for the moment the only user
is the timestamp echo needed for the (CCID3) handshake RTT sample.

Padding of options has been put into a small separate routine, to be shared among
the two functions. This could also be used as a generic routine to finish inserting
options.

Also removed an `XXX' comment since its content was obvious.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Handle timestamps on Request/Response exchange separately
Gerrit Renker [Thu, 13 Dec 2007 14:37:19 +0000 (12:37 -0200)]
[DCCP]: Handle timestamps on Request/Response exchange separately

In DCCP, timestamps can occur on packets anytime, CCID3 uses a timestamp(/echo) on the Request/Response
exchange. This patch addresses the following situation:
* timestamps are recorded on the listening socket;
* Responses are sent from dccp_request_sockets;
* suppose two connections reach the listening socket with very small time in between:
* the first timestamp value gets overwritten by the second connection request.

This is not really good, so this patch separates timestamps into
 * those which are received by the server during the initial handshake (on dccp_request_sock);
 * those which are received by the client or the client after connection establishment.

As before, a timestamp of 0 is regarded as indicating that no (meaningful) timestamp has been
received (in addition, a warning message is printed if hosts send 0-valued timestamps).

The timestamp-echoing now works as follows:
 * when a timestamp is present on the initial Request, it is placed into dreq, due to the
   call to dccp_parse_options in dccp_v{4,6}_conn_request;
 * when a timestamp is present on the Ack leading from RESPOND => OPEN, it is copied over
   from the request_sock into the child cocket in dccp_create_openreq_child;
 * timestamps received on an (established) dccp_sock are treated as before.

Since Elapsed Time is measured in hundredths of milliseconds (13.2), the new dccp_timestamp()
function is used, as it is expected that the time between receiving the timestamp and
sending the timestamp echo will be very small against the wrap-around time. As a byproduct,
this allows smaller timestamping-time fields.

Furthermore, inserting the Timestamp Echo option has been taken out of the block starting with
'!dccp_packet_without_ack()', since Timestamp Echo can be carried on any packet (5.8 and 13.3).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Add (missing) option parsing to request_sock processing
Gerrit Renker [Thu, 13 Dec 2007 14:31:26 +0000 (12:31 -0200)]
[DCCP]: Add (missing) option parsing to request_sock processing

This adds option-parsing code to processing of Acks in the listening state
on request_socks on the server, serving two purposes
 (i)  resolves a FIXME (removed);
 (ii) paves the way for feature-negotiation during connection-setup.

There is an intended subtlety here with regard to dccp_check_req:

 Parsing options happens only after testing whether the received packet is
 a retransmitted Request.  Otherwise, if the Request contained (a possibly
 large number of) feature-negotiation options, recomputing state would have to
 happen each time a retransmitted Request arrives, which opens the door to an
 easy DoS attack.  Since in a genuine retransmission the options should not be
 different from the original, reusing the already computed state seems better.

 The other point is - if there are timestamp options on the Request, they will
 not be answered; which means that in the presence of retransmission (likely
 due to loss and/or other problems), the use of Request/Response RTT sampling
 is suspended, so that startup problems here do not propagate.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Allow to parse options on Request Sockets
Gerrit Renker [Thu, 13 Dec 2007 14:29:24 +0000 (12:29 -0200)]
[DCCP]: Allow to parse options on Request Sockets

The option parsing code currently only parses on full sk's. This causes a problem for
options sent during the initial handshake (in particular timestamps and feature-negotiation
options). Therefore, this patch extends the option parsing code with an additional argument
for request_socks: if it is non-NULL, options are parsed on the request socket, otherwise
the normal path (parsing on the sk) is used.

Subsequent patches, which implement feature negotiation during connection setup, make use
of this facility.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Collapse repeated `len' statements into one
Gerrit Renker [Thu, 13 Dec 2007 14:27:14 +0000 (12:27 -0200)]
[DCCP]: Collapse repeated `len' statements into one

This replaces 4 individual assignments for `len' with a single
one, placed where the control flow of those 4 leads to.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Support for server holding timewait state
Gerrit Renker [Thu, 13 Dec 2007 14:25:01 +0000 (12:25 -0200)]
[DCCP]: Support for server holding timewait state

This adds a socket option and signalling support for the case where the server
holds timewait state on closing the connection, as described in RFC 4340, 8.3.

Since holding timewait state at the server is the non-usual case, it is enabled
via a socket option. Documentation for this socket option has been added.

The setsockopt statement has been made resilient against different possible cases
of expressing boolean `true' values using a suggestion by Ian McDonald.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Use maximum-RTO backoff from DCCP spec
Gerrit Renker [Thu, 13 Dec 2007 14:16:23 +0000 (12:16 -0200)]
[DCCP]: Use maximum-RTO backoff from DCCP spec

This removes another Fixme, using the TCP maximum RTO rather than the value
specified by the DCCP specification. Across the sections in RFC 4340, 64
seconds is consistently suggested as maximum RTO backoff value; and this is
the value which is now used.

I have checked both termination cases for retransmissions of Close/CloseReq:
with the default value 15 of `retries2', and an initial icsk_retransmit = 0,
it takes about 614 seconds to declare a non-responding peer as dead, after
which the final terminating Reset is sent. With the TCP maximum RTO value of
120 seconds it takes (as might be expected) almost twice as long, about 23
minutes.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Shift the retransmit timer for active-close into output.c
Gerrit Renker [Thu, 13 Dec 2007 14:02:43 +0000 (12:02 -0200)]
[DCCP]: Shift the retransmit timer for active-close into output.c

When performing active close, RFC 4340, 8.3. requires to retransmit the
Close/CloseReq with a backoff-retransmit timer starting at intially 2 RTTs.

This patch shifts the existing code for active-close retransmit timer
into output.c, so that the retransmit timer is started when the first
Close/CloseReq is sent. Previously, the timer was started when, after
releasing the socket in dccp_close(), the actively-closing side had not yet
reached the CLOSED/TIMEWAIT state.

The patch further reduces the initial timeout from 3 seconds to the required
2 RTTs, where - in absence of a known RTT - the fallback value specified in
RFC 4340, 3.4 is used.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: fix section mismatch warnings
Daniel Lezcano [Thu, 13 Dec 2007 13:34:58 +0000 (05:34 -0800)]
[IPV6]: fix section mismatch warnings

Removed useless and buggy __exit section in the different
ipv6 subsystems. Otherwise they will be called inside an
init section during rollbacking in case of an error in the
protocol initialization.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DCCP]: Perform SHUT_RD and SHUT_WR on receiving close
Gerrit Renker [Thu, 13 Dec 2007 13:28:43 +0000 (11:28 -0200)]
[DCCP]: Perform SHUT_RD and SHUT_WR on receiving close

This patch performs two changes:

1) Close the write-end in addition to the read-end when a fin-like segment
  (Close or CloseReq) is received by DCCP. This accounts for the fact that DCCP,
  in contrast to TCP, does not have a half-close. RFC 4340 says in this respect
  that when a fin-like segment has been sent there is no guarantee at all that
  any   further data will be processed.
  Thus this patch performs SHUT_WR in addition to the SHUT_RD when a fin-like
  segment is encountered.

2) Minor change: I noted that code appears twice in different places and think it
   makes sense to put this into a self-contained function (dccp_enqueue()).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[DECNET]: Fix inverted wait flag in xfrm_lookup call
Herbert Xu [Thu, 13 Dec 2007 13:24:40 +0000 (05:24 -0800)]
[DECNET]: Fix inverted wait flag in xfrm_lookup call

My previous patch made the wait flag take the opposite value to what
it should be.  This patch fixes that.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: Check RTNL status in unregister_netdevice
Herbert Xu [Thu, 13 Dec 2007 03:21:56 +0000 (19:21 -0800)]
[NET]: Check RTNL status in unregister_netdevice

The caller must hold the RTNL so let's check it in unregister_netdevice.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPSEC]: Do not let packets pass when ICMP flag is off
Herbert Xu [Thu, 13 Dec 2007 02:54:16 +0000 (18:54 -0800)]
[IPSEC]: Do not let packets pass when ICMP flag is off

This fixes a logical error in ICMP policy checks which lets
packets through if the state ICMP flag is off.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPSEC]: Make callers of xfrm_lookup to use XFRM_LOOKUP_WAIT
Herbert Xu [Thu, 13 Dec 2007 02:48:58 +0000 (18:48 -0800)]
[IPSEC]: Make callers of xfrm_lookup to use XFRM_LOOKUP_WAIT

This patch converts all callers of xfrm_lookup that used an
explicit value of 1 to indiciate blocking to use the new flag
XFRM_LOOKUP_WAIT.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPSEC]: Fix reversed ICMP6 policy check
Herbert Xu [Thu, 13 Dec 2007 02:47:48 +0000 (18:47 -0800)]
[IPSEC]: Fix reversed ICMP6 policy check

The policy check I added for ICMP on IPv6 is reversed.  This
patch fixes that.

It also adds an skb->sp check so that unprotected packets that
fail the policy check do not crash the machine.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Fix compiler warning.
Michael Chan [Fri, 21 Dec 2007 23:04:49 +0000 (15:04 -0800)]
[BNX2]: Fix compiler warning.

Change bnx2_init_napi() to void.

Warning was noted by DaveM.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Update version to 1.7.1.
Michael Chan [Fri, 21 Dec 2007 04:02:14 +0000 (20:02 -0800)]
[BNX2]: Update version to 1.7.1.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Enable new tx ring.
Michael Chan [Fri, 21 Dec 2007 04:01:44 +0000 (20:01 -0800)]
[BNX2]: Enable new tx ring.

Enable new tx ring and add new MSIX handler and NAPI poll function
for the new tx ring.  Enable MSIX when the hardware supports it.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Add support for a new tx ring.
Michael Chan [Fri, 21 Dec 2007 04:01:19 +0000 (20:01 -0800)]
[BNX2]: Add support for a new tx ring.

To separate TX IRQs into a different MSIX vector, we need to
support a new tx ring.  The original tx ring will still be used
when not using MSIX.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Support multiple MSIX IRQs.
Michael Chan [Fri, 21 Dec 2007 03:59:30 +0000 (19:59 -0800)]
[BNX2]: Support multiple MSIX IRQs.

Change bnx2_napi struct into an array and add code to manage multiple
IRQs.  MSIX hardware structures and new registers are also added.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Move rx indexes into bnx2_napi struct.
Michael Chan [Fri, 21 Dec 2007 03:57:19 +0000 (19:57 -0800)]
[BNX2]: Move rx indexes into bnx2_napi struct.

Rx related fields used in NAPI polling are moved from the main
bnx2 struct to the bnx2_napi struct.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Move tx indexes into bnx2_napi struct.
Michael Chan [Fri, 21 Dec 2007 03:56:59 +0000 (19:56 -0800)]
[BNX2]: Move tx indexes into bnx2_napi struct.

Tx related fields used in NAPI polling are moved from the main
bnx2 struct to the bnx2_napi struct.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Introduce new bnx2_napi structure.
Michael Chan [Fri, 21 Dec 2007 03:56:37 +0000 (19:56 -0800)]
[BNX2]: Introduce new bnx2_napi structure.

Introduce a bnx2_napi structure that will hold a napi_struct and
other fields to handle NAPI polling for the napi_struct.  Various tx
and rx indexes and status block pointers will be moved from the main
bnx2 structure to this bnx2_napi structure.

Most NAPI path functions are modified to be passed this bnx2_napi
struct pointer.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Restructure IRQ datastructures.
Michael Chan [Fri, 21 Dec 2007 03:56:09 +0000 (19:56 -0800)]
[BNX2]: Restructure IRQ datastructures.

Add a table to keep track of multiple IRQs and restructure the IRQ
request and free functions so that they can be easily expanded to
handle multiple IRQs.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Add function to fetch hardware tx index.
Michael Chan [Fri, 21 Dec 2007 03:55:39 +0000 (19:55 -0800)]
[BNX2]: Add function to fetch hardware tx index.

This makes the code cleaner and easier to support different tx rings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Update version to 1.6.9.
Michael Chan [Wed, 12 Dec 2007 19:20:22 +0000 (11:20 -0800)]
[BNX2]: Update version to 1.6.9.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Enable S/G for jumbo RX.
Michael Chan [Wed, 12 Dec 2007 19:19:57 +0000 (11:19 -0800)]
[BNX2]: Enable S/G for jumbo RX.

If the MTU requires more than 1 page for the SKB, enable the page ring
and calculate the size of the page ring.  This will guarantee order-0
allocation regardless of the MTU size.

Fixup loopback test packet size so that we don't deal with the pages
during loopback test.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Add fast path code to handle RX pages.
Michael Chan [Wed, 12 Dec 2007 19:19:35 +0000 (11:19 -0800)]
[BNX2]: Add fast path code to handle RX pages.

Add function to reuse a page in case of allocation or other errors.
Add code to construct the completed SKB with the additional data in
the pages.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Add init. code to handle RX pages.
Michael Chan [Wed, 12 Dec 2007 19:19:12 +0000 (11:19 -0800)]
[BNX2]: Add init. code to handle RX pages.

Add new fields to keep track of the pages and the page rings.
Add functions to allocate and free pages.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Update firmware to support S/G RX buffers.
Michael Chan [Wed, 12 Dec 2007 19:18:34 +0000 (11:18 -0800)]
[BNX2]: Update firmware to support S/G RX buffers.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Restructure RX ring init. code.
Michael Chan [Wed, 12 Dec 2007 19:17:43 +0000 (11:17 -0800)]
[BNX2]: Restructure RX ring init. code.

Factor out the common functions that will be used to initialize the
normal RX rings and the page rings.

Change the copybreak constant RX_COPY_THRESH to 128.  This same
constant will be used for the max. size of the linear SKB when pages
are used.  Copybreak will be turned off when pages are used.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Restructure RX fast path handling.
Michael Chan [Wed, 12 Dec 2007 19:17:01 +0000 (11:17 -0800)]
[BNX2]: Restructure RX fast path handling.

Add a new function to handle new SKB allocation and to prepare the
completed SKB.  This makes it easier to add support for non-linear
SKB.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2]: Add ring constants.
Michael Chan [Wed, 12 Dec 2007 19:16:19 +0000 (11:16 -0800)]
[BNX2]: Add ring constants.

Define the various ring constants to make the code cleaner.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: fix drivers/net/ns83820.c build
Andrew Morton [Wed, 12 Dec 2007 23:07:11 +0000 (15:07 -0800)]
[NET]: fix drivers/net/ns83820.c build

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPIP]: Allow rebinding the tunnel to another interface
Michal Schmidt [Wed, 12 Dec 2007 19:01:43 +0000 (11:01 -0800)]
[IPIP]: Allow rebinding the tunnel to another interface

Once created, an IP tunnel can't be bound to another device.
(reported as https://bugzilla.redhat.com/show_bug.cgi?id=419671)

To reproduce:

# create a tunnel:
ip tunnel add tunneltest0 mode ipip remote 10.0.0.1 dev eth0
# try to change the bounding device from eth0 to eth1:
ip tunnel change tunneltest0 dev eth1
# show the result:
ip tunnel show tunneltest0

tunneltest0: ip/ip  remote 10.0.0.1  local any  dev eth0  ttl inherit

Notice the bound device has not changed from eth0 to eth1.

This patch fixes it. When changing the binding, it also recalculates the
MTU according to the new bound device's MTU.

If the change is acceptable, I'll do the same for GRE and SIT tunnels.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: Remove unused define from loopback driver.
Pavel Emelyanov [Wed, 12 Dec 2007 19:00:04 +0000 (11:00 -0800)]
[NET]: Remove unused define from loopback driver.

The LOOPBACK_OVERHEAD is not used in this file at all.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETNS]: network namespace was passed into dev_getbyhwaddr but not used
Denis V. Lunev [Wed, 12 Dec 2007 18:47:38 +0000 (10:47 -0800)]
[NETNS]: network namespace was passed into dev_getbyhwaddr but not used

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: Remove FASTCALL macro
Harvey Harrison [Wed, 12 Dec 2007 18:46:51 +0000 (10:46 -0800)]
[NET]: Remove FASTCALL macro

X86_32 was the last user of the FASTCALL macro, now that it
uses regparm(3) by default, this macro expands to nothing.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPSEC]: Add ICMP host relookup support
Herbert Xu [Wed, 12 Dec 2007 18:44:43 +0000 (10:44 -0800)]
[IPSEC]: Add ICMP host relookup support

RFC 4301 requires us to relookup ICMP traffic that does not match any
policies using the reverse of its payload.  This patch implements this
for ICMP traffic that originates from or terminates on localhost.

This is activated on outbound with the new policy flag XFRM_POLICY_ICMP,
and on inbound by the new state flag XFRM_STATE_ICMP.

On inbound the policy check is now performed by the ICMP protocol so
that it can repeat the policy check where necessary.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPSEC]: Added xfrm_decode_session_reverse and xfrmX_policy_check_reverse
Herbert Xu [Wed, 12 Dec 2007 18:44:16 +0000 (10:44 -0800)]
[IPSEC]: Added xfrm_decode_session_reverse and xfrmX_policy_check_reverse

RFC 4301 requires us to relookup ICMP traffic that does not match any
policies using the reverse of its payload.  This patch adds the functions
xfrm_decode_session_reverse and xfrmX_policy_check_reverse so we can get
the reverse flow to perform such a lookup.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPSEC]: Make xfrm_lookup flags argument a bit-field
Herbert Xu [Wed, 12 Dec 2007 18:36:59 +0000 (10:36 -0800)]
[IPSEC]: Make xfrm_lookup flags argument a bit-field

This patch introduces an enum for bits in the flags argument of xfrm_lookup.
This is so that we can cram more information into it later.

Since all current users use just the values 0 and 1, XFRM_LOOKUP_WAIT has
been added with the value 1 << 0 to represent the current meaning of flags.

The test in __xfrm_lookup has been changed accordingly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TFRC]: Remove previous loss intervals implementation
Gerrit Renker [Wed, 12 Dec 2007 16:23:08 +0000 (14:23 -0200)]
[TFRC]: Remove previous loss intervals implementation

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[CCID3]: Interface CCID3 code with newer Loss Intervals Database
Gerrit Renker [Wed, 12 Dec 2007 16:06:14 +0000 (14:06 -0200)]
[CCID3]: Interface CCID3 code with newer Loss Intervals Database

This hooks up the TFRC Loss Interval database with CCID 3 packet reception.
In addition, it makes the CCID-specific computation of the first loss
interval (which requires access to all the guts of CCID3) local to ccid3.c.

The patch also fixes an omission in the DCCP code, that of a default /
fallback RTT value (defined in section 3.4 of RFC 4340 as 0.2 sec); while
at it, the  upper bound of 4 seconds for an RTT sample has  been reduced to
match the initial TCP RTO value of 3 seconds from[RFC 1122, 4.2.3.1].

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TFRC]: CCID3 (and CCID4) needs to access these inlines
Gerrit Renker [Wed, 12 Dec 2007 16:03:01 +0000 (14:03 -0200)]
[TFRC]: CCID3 (and CCID4) needs to access these inlines

This moves two inlines back to packet_history.h: these are not private
to packet_history.c, but are needed by CCID3/4 to detect whether a new
loss is indicated, or whether a loss is already pending.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[CCID3]: Redundant debugging output / documentation
Gerrit Renker [Wed, 12 Dec 2007 15:57:14 +0000 (13:57 -0200)]
[CCID3]: Redundant debugging output / documentation

Each time feedback is sent two lines are printed:

ccid3_hc_rx_send_feedback: client ... - entry
ccid3_hc_rx_send_feedback: Interval ...usec, X_recv=..., 1/p=...

The first line is redundant and thus removed.

Further, documentation of ccid3_hc_rx_sock (capitalisation) is made consistent.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TFRC]: Ringbuffer to track loss interval history
Gerrit Renker [Wed, 12 Dec 2007 15:50:51 +0000 (13:50 -0200)]
[TFRC]: Ringbuffer to track loss interval history

A ringbuffer-based implementation of loss interval history is easier to
maintain, allocate, and update.

The `swap' routine to keep the RX history sorted is due to and was written
by Arnaldo Carvalho de Melo, simplifying an earlier macro-based variant.

Details:
 * access to the Loss Interval Records via macro wrappers (with safety checks);
 * simplified, on-demand allocation of entries (no extra memory consumption on
   lossless links); cache allocation is local to the module / exported as service;
 * provision of RFC-compliant algorithm to re-compute average loss interval;
 * provision of comprehensive, new loss detection algorithm
  - support for all cases of loss, including re-ordered/duplicate packets;
  - waiting for NDUPACK=3 packets to fill the hole;
- updating loss records when a late-arriving packet fills a hole.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TFRC]: Loss interval code needs the macros/inlines that were moved
Gerrit Renker [Wed, 12 Dec 2007 14:28:40 +0000 (12:28 -0200)]
[TFRC]: Loss interval code needs the macros/inlines that were moved

This moves the inlines (which were previously declared as macros) back into
packet_history.h since the loss detection code needs to be able to read entries
from the RX history in order to create the relevant loss entries: it needs at
least tfrc_rx_hist_loss_prev() and tfrc_rx_hist_last_rcv(), which in turn
require the definition of the other inlines (macros).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TFRC]: Put RX/TX initialisation into tfrc.c
Gerrit Renker [Wed, 12 Dec 2007 14:24:49 +0000 (12:24 -0200)]
[TFRC]: Put RX/TX initialisation into tfrc.c

This separates RX/TX initialisation and puts all packet history / loss intervals
initialisation into tfrc.c.
The organisation is uniform: slab declaration -> {rx,tx}_init() -> {rx,tx}_exit()

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>