Andi Kleen [Wed, 30 Jan 2008 12:33:52 +0000 (13:33 +0100)]
x86: c_p_a() make it more robust against use of PAT bits
Use the page table level instead of the PSE bit to check if the PTE
is for a 4K page or not. This makes the code more robust when the PAT
bit is changed because the PAT bit on 4K pages is in the same position
as the PSE bit.
Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Intel recommends to first flush the TLBs and then the caches
on caching attribute changes. c_p_a() previously did it the
other way round. Reorder that.
The procedure is still not fully compliant to the Intel documentation
because Intel recommends a all CPU synchronization step between
the TLB flushes and the cache flushes.
However on all new Intel CPUs this is now meaningless anyways
because they support Self-Snoop and can skip the cache flush
step anyway.
[ mingo@elte.hu: decoupled from clflush and ported it to x86.git ]
Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi Kleen [Wed, 30 Jan 2008 12:33:51 +0000 (13:33 +0100)]
x86: don't drop NX bit in pte modifier functions on 32-bit
The pte_* modifier functions that cleared bits dropped the NX bit on 32bit
PAE because they only worked in int, but NX is in bit 63. Fix that
by adding appropiate casts so that the arithmetic happens as long long
on PAE kernels.
I decided to just use 64bit arithmetic instead of open coding like
pte_modify() because gcc should generate good enough code for that now.
Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar [Wed, 30 Jan 2008 12:33:48 +0000 (13:33 +0100)]
x86: fix early_ioremap()/btmap
fix a long-standing weakness of the early-ioremap allocator: it
uses a single pgd entry for the boot mappings, and was not properly
protecting itself against crossing a 2MB (4MB) boundary.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Huang, Ying [Wed, 30 Jan 2008 12:33:44 +0000 (13:33 +0100)]
i386 boot: replace boot_ioremap with enhanced bt_ioremap - enhance bt_ioremap
This patch makes it possible for bt_ioremap() to be used before
paging_init(), via providing an early implementation of set_fixmap()
that can be used before paging_init().
This way boot_ioremap() can be replaced by bt_ioremap().
Siddha, Suresh B [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: set strong uncacheable where UC is really desired
Also use _PAGE_PWT for all the mappings which need uncache mapping.
Instead of existing PAT2 which is UC- (and can be overwritten by MTRRs),
we now use PAT3 which is strong uncacheable.
Andi Kleen [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: c_p_a(), add simple self test at boot
Since change_page_attr() is tricky code it is good to have some regression
test code. This patch maps and unmaps some random pages in the direct mapping
at boot and then dumps the state and does some simple sanity checks.
Add it with a CONFIG option.
Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: return the page table level in lookup_address()
based on this patch from Andi Kleen:
| Subject: CPA: Return the page table level in lookup_address()
| From: Andi Kleen <ak@suse.de>
|
| Needed for the next change.
|
| And change all the callers.
and ported it to x86.git.
Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi Kleen [Wed, 30 Jan 2008 12:33:42 +0000 (13:33 +0100)]
x86: clean up pte_exec
- Rename it to pte_exec() from pte_exec_kernel(). There is nothing
kernel specific in there.
- Move it into the common file because _PAGE_NX is 0 on !PAE and then
pte_exec() will be always evaluate to true.
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If SHARED_KERNEL_PMD is false, then we need to allocate and initialize
the kernel pmd. We can easily piggy-back this onto the existing pmd
prepopulation code.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In PAE mode, an update to the pgd requires a cr3 reload to make sure
the processor notices the changes. Since this also has the
side-effect of flushing the tlb, its an expensive operation which we
want to avoid where possible.
This patch mitigates the cost of installing the initial set of pmds on
process creation by preallocating them when the pgd is allocated.
This avoids up to three tlb flushes during exec, as it creates the new
process address space while the pagetable is in active use.
The pmds will be freed as part of the normal pagetable teardown in
free_pgtables, which is called in munmap and process exit. However,
free_pgtables will only free parts of the pagetable which actually
contain mappings, so stray pmds may still be attached to the pgd at
pgd_free time. We must mop them up to prevent a memory leak.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: William Irwin <wli@holomorphy.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Convert macros into inline functions, for better type-checking.
This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions. I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some consumer ICH9 boards (such as the Abit IP35 Pro) do not provide a BIOS
option for enabling the HPET. The same ICH workaround used for 6,7,8 can be
applied to 9. Here I enable the only PCI id that was visible on my system.
I have confirmed the HPETs work both from userspace and as a clocksource for
the running kernel (2.6.24 here) after applying this patch.
Force enabled HPET at base address 0xfed00000
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify arch/x86/boot/compressed/misc_??.c
Remainder of unification can occur inplace.
size reports no change in arch/x86/boot/compressed/vmlinux.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify variable names in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify headers in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify whitespace and comments in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify strings in arch/x86/boot/compressed/misc_??.c
There seems to be a preference for the 64 bit version so use that on 32 bit and
drop the stray leading "."
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
size reports no change in arch/x86/boot/compressed/vmlinux.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: switch to .rodata.compressed in arch/x86/boot/compressed/vmlinux_??.scr
vmlinux_64 and vmlinux_32.scr are now identical
size shows an expected movement from .text to .rodata and 4 extra bytes
of padding.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: unify whitespace in arch/x86/boot/compressed/vmlinux_??.scr
size reports no change in arch/x86/boot/compressed/vmlinux.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: unify whitespace and comments in arch/x86/boot/compressed/vmlinux_??.lds
size reports no change in arch/x86/boot/compressed/vmlinux.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix usage of .section .sched.text in assembler code
Without this patch the linker will generate a section
named .sched.text.1 which is unexpected.
This is because the gcc generated section has "ax" but the
assembler usage of .sched.text lacks the "ax" specifier.
It would be better to have a definition we could use from
assembler code but I did not find a suitable header
file for it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in setup_64.c
Fix the following warning:
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x7a3): Section mismatch: reference to .init.text:amd_detect_cmp in 'init_amd'
The function amd_detect_cmp were annotated __init and
was only used from init_amd() which are annotated __cpuinit.
Annotate amd_detect_cmp() with _cpuinit to fix it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in topology.c
Fix following warning:
WARNING: arch/x86/kernel/built-in.o(__ksymtab+0x2b0): Section mismatch: reference to .cpuinit.text:arch_register_cpu in '__ksymtab_arch_register_cpu'
Annotating exported symbols are wrong.
Previously the warning were hidden by avoiding the export
in the non HOTPLUG_CPU case but the improved checks in
modpost caught it anyway.
Fix it by removing the __cpuinit annotation and rearrange the
code a bit to save one ifdef/endif pair.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in srat_64.c
Fix the following warnings:
WARNING: arch/x86/mm/built-in.o(.text+0x1abc): Section mismatch: reference to .init.data:nodes_parsed in 'unparse_node'
WARNING: arch/x86/mm/built-in.o(.text+0x1ac6): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node'
WARNING: arch/x86/mm/built-in.o(.text+0x1ad2): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node'
unparse_node are static and only used by acpi_scan_nodes which
is already annotated __init.
So we annotate unparse_node with __init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in early-quirks.c
Fix following warnings:
WARNING: arch/x86/kernel/built-in.o(.text+0x139e1): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x139f5): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a0c): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a12): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a1a): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a36): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a42): Section mismatch: reference to .init.data:
Warning was caused by access to the __initdata annotated variable
from the non-annotated static function check_dev_quirk().
check_dev_quirk() were only used from a function annotated
__init so add __init annotation to check_dev_quirk() to fix it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in acpi/boot.c
Fix following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic'
The exported function acpi_unmap_lsapic() references
the variable num_processors that is annotated __cpuinitdata.
Remove the annotation of num_processors as we never know
when an exported function are called.
And drop the needless initialsation to 0.
Warning was seen on 64 bit but similar pattern were seen
in 32 bit - so fix it up there too.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in process_*.c
Fix the following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x3): Section mismatch: reference to .cpuinit.data:force_mwait in 'mwait_usable'
[Seen on 64 bit only but similar pattern exist on 32 bit so fix it there too]
mwait_usable() were only used by a function annotated __cpuinit
so annotate mwait_usable() with __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
x86: fix section mismatch warning in mcheck/mce_amd_64.c
Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback'
threshold_cpu_callback() is only used by threshold_cpu_notifier.
threshold_cpu_notifier is only used for cpu hot plug as it is registered
using register_hotcpu_notifier().
Mark them both __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
x86: fix section mismatch warning in mcheck/mce_64.c
Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x752): Section mismatch: reference to .cpuinit.text:mce_create_device in 'mce_cpu_callback'
mce_cpu_callback() is only used by mce_cpu_notofier.
The notifier is only used for hotplugable cpu's as it is
registered using register_hotcpu_notifier(),
Annotate them both __cpuinit to fix the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Florian Fainelli [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
x86: add support for the RDC R-321x SoC
This patch adds support for the RDC R-321x system-on-chip,
also known as R-861x-(G). It uses the generic GPIO API and
has support for the on-chip hardware watchdog.
Build-fix from: Randy Dunlap <randy.dunlap@oracle.com>
Florian Fainelli [Wed, 30 Jan 2008 12:33:35 +0000 (13:33 +0100)]
x86: add generic GPIO support to x86
This patch adds the generic GPIO support to the x86
architecture. We do the same as for MIPS, we let
the machine override the gpio callbacks and provide
defaults one in mach-generic.
Andres Salomon [Wed, 30 Jan 2008 12:33:35 +0000 (13:33 +0100)]
x86: GEODE: update GPIO API to support setting multiple GPIOs at once
The existing Geode GPIO API only allows for updating one GPIO at once. There
are instances where users want to update multiple GPIOs at once. With the
current API, they are given two choices; either ignore the GPIO API:
Neither are desirable. This patch changes the GPIO API to allow for setting
of multiple GPIOs at once; rather than being passed an integer, we pass
a bitmask and provide a translation function. The above code would now
look like this:
Since there are no upstream users of the GPIO API yet (afaik), best to
change this now. This also adds a bit of sanity checking; it is no
longer possible to use a GPIO above 28.
Note the semantics of geode_gpio_isset() have changed:
geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...)
will only return true iff both GPIOs are set.
Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix cpu MHz reporting for AMD family 0x11 when powernow-k8 is
disabled.
Just adhere to the CONSTANT_TSC feature bit for AMD CPUs when deciding
whether cpu_khz needs calibration. The additional check for CPU family
is not needed and prevents calibration for future CPUs.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Minoru Usui [Wed, 30 Jan 2008 12:33:35 +0000 (13:33 +0100)]
x86: fix NUMA emulation on 64-bit
I found a small bug of NUMA emulation code for x86_64. (CONFIG_NUMA_EMU)
If machine is non-NUMA, find_node_by_addr() should return
NUMA_NO_NODE, but current implementation code returns existent maximum
NUMA node number + 1.
This is not existent NUMA node number.
However, this behaviour does not affect NUMA emulation fortunately, because
acpi_fake_nodes() that is caller of find_node_by_addr() gets pxm
(proximity domain) by node_to_pxm() from non-existent NUMA node number
that was returned by find_node_by_addr().
node_to_pxm() returns PXM_INVAL that means illegal or non-existent
NUMA node number.
Yi Yang [Wed, 30 Jan 2008 12:33:34 +0000 (13:33 +0100)]
cpufreq: fix obvious condition statement error
The function __cpufreq_set_policy in file drivers/cpufreq/cpufreq.c
has a very obvious error:
if (policy->min > data->min && policy->min > policy->max) {
ret = -EINVAL;
goto error_out;
}
This condtion statement is wrong because it returns -EINVAL only if
policy->min is greater than policy->max (in this case,
"policy->min > data->min" is true for ever.). In fact, it should
return -EINVAL as well if policy->max is less than data->min.
The correct condition should be:
if (policy->min > data->max || policy->max < data->min) {
The following test result testifies the above conclusion:
travis@sgi.com [Wed, 30 Jan 2008 12:33:33 +0000 (13:33 +0100)]
x86: early cpu_to_node fix in numa_64.c
Both of these references to cpu_to_node() can potentially occur
before the "late" cpu_to_node map is setup. Therefore, they
should be changed to use early_cpu_to_node().
Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Willy Tarreau [Wed, 30 Jan 2008 12:33:33 +0000 (13:33 +0100)]
x86: GEODE add the "mfgptfix" boot time option to fix MFGPT timers
The new "mfgptfix" boot command line option may be usd to fix MFGPT
timers on AMD Geode platforms when the BIOS has incorrectly applied
a workaround. TinyBIOS version 0.98 is known to be affected, 0.99
fixes the problem by letting the user disable the workaround.
Andi Kleen [Wed, 30 Jan 2008 12:33:32 +0000 (13:33 +0100)]
x86: remove iBCS support
ibcs2 support has never been supported on 2.6 kernels as far as I know,
and if it has it must have been an external patch. Anyways, if anybody
applies an external patch they could as well readd the ibcs checking
code to the ELF loader in the same patch. But there is no reason to
keep this code running in all Linux kernels. This will save at least
two strcmps each ELF execution.
No deprecation period because it could not have been used anyway.
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Bernhard Walle [Wed, 30 Jan 2008 12:33:31 +0000 (13:33 +0100)]
rtc: use the IRQ callback interface in (old) RTC driver
the previous patch in the old RTC driver. It also removes the direct
rtc_interrupt() call from arch/x86/kernel/hpetc.c so that there's finally no
(code) dependency to CONFIG_RTC in arch/x86/kernel/hpet.c.
Because of this, it's possible to compile the drivers/char/rtc.ko driver as
module and still use the HPET emulation functionality. This is also expressed
in Kconfig.
Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Bernhard Walle [Wed, 30 Jan 2008 12:33:28 +0000 (13:33 +0100)]
x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules
enabled, then interrupts don't work for the rtc-cmos driver which results in
RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from
util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a
polling method is used for unknown reasons.)
This patch series now
1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc
driver uses to work around that problem,
2. makes it possible to compile the old rtc driver as module, while still
having CONFIG_HPET_EMULATE_RTC enabled and
3. makes use of the exported functions in (1) in the new rtc-cmos driver.
This patch:
This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable
for kernel modules. It
- exports the functions (EXPORT_SYMBOL_GPL()),
- adds an interface to register the interrupt callback function
instead of using only a fixed callback function and
- replaces the rtc_get_rtc_time() function which depends on
CONFIG_RTC with a call to get_rtc_time() which is defined in
include/asm-generic/rtc.h.
The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is
removed by the next patch. After this, there's no (code) dependency of
this functions to CONFIG_RTC=y any more.
Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:27 +0000 (13:33 +0100)]
x86_32: always run the full set of paging state.
I am preparing to convert the boot time page table to the kernels
native format. To achieve that I need to enable PAE. Enabling PSE
and the no execute bit would not hurt. So this patch modifies
the boot cpu path to execute all of the kernels enable code
if and only if we have the proper bits set in mmu_cr4_features.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ian Campbell [Wed, 30 Jan 2008 12:33:27 +0000 (13:33 +0100)]
x86_32: remove unnecessary use of %ebx as the boot cpu flag
Currently in head_32.S there are two ways we test to see if we
are the boot cpu. By looking at %ebx and by looking at the
static variable ready. When changing things around I have
found that it gets tricky to preserve %ebx. So this
patch just switches head.S over to the more reliable
test of always using ready.
Hopefully later we can kill these tests entirely.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
travis@sgi.com [Wed, 30 Jan 2008 12:33:25 +0000 (13:33 +0100)]
x86: change size of node ids from u8 to s16
Change the size of node ids for X86_64 from u8 to s16 to
accomodate more than 32k nodes and allow for NUMA_NO_NODE
(-1) to be sign extended to int.
Cc: David Rientjes <rientjes@google.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Mel Gorman [Wed, 30 Jan 2008 12:33:25 +0000 (13:33 +0100)]
x86: relax restrictions on setting CONFIG_NUMA on x86, #2
The FLATMEM memory model references a global mem_map and max_mapnr. This
is incompatible with how memory models used for NUMA view the world.
Builds fail if FLATMEM && NUMA are set on x86. This patch forbids that
combination of config items. This is consistent with x86_64
enforcements.
Mel Gorman [Wed, 30 Jan 2008 12:33:25 +0000 (13:33 +0100)]
x86: make NUMA work on 32-bit
The DISCONTIG memory model on x86 32 bit uses a remap allocator early
in boot. The objective is that portions of every node are mapped in to
the kernel virtual area (KVA) in place of ZONE_NORMAL so that node-local
allocations can be made for pgdat and mem_map structures.
With SPARSEMEM, the amount that is set aside is insufficient for all the
mem_maps to be allocated. During the boot process, it falls back to using
the bootmem allocator. This breaks assumptions that SPARSEMEM makes about
the layout of the mem_map in memory and results in a VM_BUG_ON triggering
due to pfn_to_page() returning garbage values.
This patch only enables the remap allocator for use with DISCONTIG.
Without SRAT support, a compile-error occurs because ACPI table parsing
functions are only available in x86-64. This patch also adds no-op stubs
and prints a warning message. What likely needs to be done is sharing
the table parsing functions between 32 and 64 bit if they are
compatible.
Sam Ravnborg [Wed, 30 Jan 2008 12:33:25 +0000 (13:33 +0100)]
xen: fix section usage in xen-head.S and setup.c
additional section for .init.text appending a number.
A side effect of this was a section mismatch warning because modpost did
not recognize a .init.text section named .init.text.1: WARNING:
vmlinux.o(.text.head+0x247): Section mismatch: reference to
.init.text.1:start_kernel (between 'is386' and 'check_x87')
Fix this by hardcoding the "ax" in the pushsection. Thanks to Torlaf for
reporting this.
Alan Modra provided the hint that made me able to locate the root cause of
this warning. And Mike Frysinger told me how to properly fix it using
__INIT/__FINIT.
Fix following Section mismatch warning in addition:
WARNING: vmlinux.o(.text+0x14c8): Section mismatch: reference to .init.data:vsyscall_int80_start (between 'fiddle_vdso' and 'xen_setup_features')
fiddle_vdso was only used from a __init function - so declare it __init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
export __supported_pte_mask variable as GPL symbol.
lguest is a user of it.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Exporrt check_tsc_unstable function as GPL symbol. lguest is
a user of it.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
projects / linux-2.6 / log