Dave Airlie [Fri, 5 Aug 2005 12:13:15 +0000 (22:13 +1000)]
drm: switch drm_handle_t to unsigned int
This converts the drm_handle_t to unsigned int.
This is currently safe to do as we don't pass these across the kernel/user
boundary, but userspace does use these, but no-one builds userspace against
the kernel headers at present so it is okay to switch over the kernel copy
of drm.h at this point. (The CVS tree will switch over soon in sync with
some Mesa changes)
From: Egbert Eich <eich@suse.de> Signed-off-by: Dave Airlie <airlied@linux.ie>
Dave Airlie [Fri, 5 Aug 2005 12:11:22 +0000 (22:11 +1000)]
drm: updated DRM map patch for 32/64 bit systems
I basically combined Paul's patches with additions that I had made
for PCI scatter gather.
I also tried more carefully to avoid problems with the same token
assigned multiple times while trying to use the base address in the
token if possible to gain as much backward compatibility as possible
for broken DRI clients.
From: Paul Mackerras <paulus@samba.org> and Egbert Eich <eich@suse.de> Signed-off-by: Dave Airlie <airlied@linux.ie>
ACPI is wrong. Devices should not release their IRQ's on suspend and
re-aquire them on resume. ACPI should just re-init the IRQ controller
instead of breaking most drivers very subtly.
Breakage reported by Hugh Dickins <hugh@veritas.com>
[PATCH] sk98lin: basic suspend/resume support fixes
An early version of the sk98lin patch was merged via Len's tree. But there
were subsequent updates as a result of review from Jeff. THis fixes things
up.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch adds boundary check for the MAX_GSI_NUM. Same as the update for
i386, the patch addresses a problem with ACPI SCI IRQ. The patch corrects
the code such that SCI IRQ is skipped and duplicate entry is avoided. The
VIA chipset uses 4-bit IRQ register for internal interrupt routing, and
therefore cannot handle IRQ numbers assigned to its devices. The patch
corrects this problem by allowing PCI IRQs below 16.
Dave Peterson [Sat, 30 Jul 2005 05:59:20 +0000 (22:59 -0700)]
[PATCH] x86_64: fix bug in csum_partial_copy_generic()
I was observing reproducible crashes on the "movw %bx,(%rsi)" instruction
below while a process in a recvfrom() system call was copying packet data
to user space. The patch below fixes the exception table and causes the
crash to no longer reproduce. Please apply.
[PATCH] ppc32: fix 44x early serial debug for configurations with more than 512M of RAM
Fix 44x early serial debugging for big RAM configurations (more than 512M).
We cannot use default OpenBIOS virtual mapping, because it interferes with
pinned TLB entry.
While we are at it, move early UART mapping to TLB slot 0, so it can
survive longer during boot process (slot 1 is used by the first ioremap
call, effectively killing UART mapping if it occupies this slot). Also,
change UART TLB entry size to 4K (256M is too much for a bunch of registers
:). Squash some warnings on the way.
Tested on Ebony and Ocotea with 1G of RAM.
Thanks to Scott Coulter <scott.coulter@cyclone.com> for diagnosing this
problem.
Martin J. Bligh [Sat, 30 Jul 2005 05:59:18 +0000 (22:59 -0700)]
[PATCH] Fix NUMA node sizing in nr_free_zone_pages
We are iterating over all nodes in nr_free_zone_pages(). Because the
fallback zonelists contain all nodes in the system, and we walk all the
zonelists, we're counting memory multiple times (once for each node). This
caused us to make a size estimate of 32GB for an 8GB AMD64 box, which makes
all the dirty ratio calculations, etc incorrect.
There's still a further bug to fix from e820 holes causing overestimation
as well, but this fix is separate, and good as is, and fixes one class of
problems. Problem found by Badari, and tested by Ram Pai - thanks!
Signed-off-by: Martin J. Bligh <mbligh@mbligh.org> Signed-off-by: Matt Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Robert Love [Sat, 30 Jul 2005 05:59:17 +0000 (22:59 -0700)]
[PATCH] ppc64: inotify syscalls
inotify system call support for PPC64
[ I don't think we need sys32 compatibility versions--and if we do, I
failed in life. ]
Signed-off-by: Robert Love <rml@novell.com> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Robert Love [Sat, 30 Jul 2005 05:59:16 +0000 (22:59 -0700)]
[PATCH] ppc32: inotify syscalls
Add inotify system call stubs to PPC32.
Signed-off-by: Robert Love <rml@novell.com> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Otherwise a platform that supports ACPI based cpufreq
and boots up at lowest possible speed could stay there
forever. This because the governor may request max speed,
but the code doesn't update if there is no change in
speed, and it assumed the initial state of max speed.
http://bugzilla.kernel.org/show_bug.cgi?id=4634
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
EC burst mode benefits many machines, some of
them significantly. However, our current
implementation fails on some machines such
as Rafael's Asus L5D.
This patch restores the alternative EC polling code,
which can be enabled at boot time via "ec_polling"
http://bugzilla.kernel.org/show_bug.cgi?id=4665
Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Matthew Garrett [Fri, 29 Jul 2005 21:03:39 +0000 (14:03 -0700)]
[PATCH] agp: restore APBASE after setting APSIZE
When leaving S3 state, the AGP bridge may not have all PCI configuration
registers set in the same way as they were at boot. This should be fixed
by pci_restore_state - however, the APBASE register cannot be set to
conflict with the APSIZE register. If APSIZE is larger than it was before
suspend, pci_restore_state will not restore APBASE correctly. The attached
patch adds an extra item to the agp_bridge_data structure and uses it to
store the value of APBASE. On resume, this is then written after APSIZE
has been set. This patch only touches the path used for Intel chipsets
without integrated graphics, and may need to be extended to work with the
others.
Without this patch, I get the symptoms described in bug 4921 - APBASE ends
up overlapping various PCI devices, and as a result they fail to work after
resume.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Close a small window where a device may be not operational again after senseid
finished and the "same device" check fails due to dev=0000 by checking for dnv
after stsch() by then setting the device to not operational. (No need to
check for dnv in ccw_device_handle_oper() again since we don't do stsch() into
the subchannel's schib in the meantime and will get a crw anyway if the device
becomes not oper again).
Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch that introduced waiting for interrupts after resetting the reader
can cause the boot to fail because the system is waiting for an interrupt that
will never arrive. Add code to check if an interrupt is supposed to arrive
before waiting endlessly.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Fri, 29 Jul 2005 21:03:33 +0000 (14:03 -0700)]
[PATCH] uml: fix vsyscall brokenness
The #if/#ifdef cleanup exposed a bug in UML's ELF header processing. With
this bug fixed, UML recognizes the vsyscall info coming from the host. On
FC4, there is a vsyscall page low in the address space, which UML doesn't
provide. This causes an infinite page fault loop and a hang on boot.
This patch works around that by making this look like a no-vsyscall system.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch addresses a problem with ACPI SCI interrupt entry, which gets
re-used, and the IRQ is assigned to another unrelated device. The patch
corrects the code such that SCI IRQ is skipped and duplicate entry is
avoided. Second issue came up with VIA chipset, the problem was caused by
original patch assigning IRQs starting 16 and up. The VIA chipset uses
4-bit IRQ register for internal interrupt routing, and therefore cannot
handle IRQ numbers assigned to its devices. The patch corrects this
problem by allowing PCI IRQs below 16.
sync_tsc was using smp_call_function to ask the boot processor to report
it's tsc value. smp_call_function performs an IPI_send_allbutself which is
a broadcast ipi. There is a window during processor startup during which
the target cpu has started and before it has initialized it's interrupt
vectors so it can properly process an interrupt. Receveing an interrupt
during that window will triple fault the cpu and do other nasty things.
Why cli does not protect us from that is beyond me.
The simple fix is to match ia64 and provide a smp_call_function_single.
Which avoids the broadcast and is more efficient.
This certainly fixes the problem of getting stuck on boot which was
very easy to trigger on my SMP Hyperthreaded Xeon, and I think
it fixes it for the right reasons.
Minor changes by AK
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] mm: Ensure proper alignment for node_remap_start_pfn
While reserving KVA for lmem_maps of node, we have to make sure that
node_remap_start_pfn[] is aligned to a proper pmd boundary.
(node_remap_start_pfn[] gets its value from node_end_pfn[])
Dan Streetman [Fri, 29 Jul 2005 19:18:28 +0000 (12:18 -0700)]
[PATCH] USB: fix in usb_calc_bus_time
This patch does the same swap, i.e. use the ISO macro if (isoc).
Additionally, it fixes the return value - the usb_calc_bus_time function
returns the time in nanoseconds (I didn't notice that before) while the
HS_USECS and HS_USECS_ISO are microseconds. This fixes the function to
return nanoseconds always, and adjusts ehci-q.c (the only high-speed
caller of the function) to wrap the call in NS_TO_US().
Gigabyte GN-WLBZ201 wifi usb dongle works very well, using the zd1201
driver. the only missing part is that the corresponding usbid is not
declared. The following patch should fix this.
This patch enables a support of KYOCERA AH-K3001V, one of the most
popular cell phone in Japan. This device has vendor specific ID but works
with acm driver by adding USB ID. This device already works on
FreeBSD and OS X by native USB ACM driver with USB ID added.
This device is probed as NO_UNION_NORMAL not to hang up when probing.
Alan Stern [Fri, 29 Jul 2005 19:17:16 +0000 (12:17 -0700)]
[PATCH] USB: Usbcore: Don't try to delete unregistered interfaces
This patch handles a rarely-encountered failure mode in usbcore. It's
legal for device_add to fail (although now it happens even more rarely
than before since failure to bind a driver is no longer fatal). So when
we destroy the interfaces in a configuration, we shouldn't try to delete
ones which weren't successfully registered. Also, failure to register an
interface shouldn't be fatal either -- I think; you may disagree about
this part of the patch.
Alan Stern [Fri, 29 Jul 2005 19:16:58 +0000 (12:16 -0700)]
[PATCH] USB: usbfs: Don't leak uninitialized data
This patch fixes an information leak in the usbfs snoop facility:
uninitialized data from __get_free_page can be returned to userspace and
written to the system log. It also improves the snoop output by printing
the wLength value.
Ian Abbott [Fri, 29 Jul 2005 19:16:41 +0000 (12:16 -0700)]
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously
ftdi_sio: Update RTS and DTR simultaneously, using a single control URB
instead of separate control URBs for RTS and DTR. Reinhard Bergmann
observed time differences of up to 680 ms with his application on a
2.4.22 kernel when RTS and DTR were updated using separate control
URBs, which is unacceptable.
Ivan Kokshaysky [Fri, 29 Jul 2005 19:16:22 +0000 (12:16 -0700)]
[PATCH] PCI: remove PCI_BRIDGE_CTL_VGA handling from setup-bus.c
The setup-bus code doesn't work correctly for configurations
with more than one display adapter in the same PCI domain.
This stuff actually is a leftover of an early 2.4 PCI setup code
and apparently it stopped working after some "bridge_ctl" changes.
So the best thing we can do is just to remove it and rely on the fact
that any firmware *has* to configure VGA port forwarding for the boot
display device properly.
But then we need to ensure that the bus->bridge_ctl will always
contain valid information collected at the probe time, therefore
the following change in pci_scan_bridge() is needed.
Jon Smirl [Fri, 29 Jul 2005 19:16:17 +0000 (12:16 -0700)]
[PATCH] PCI: Adjust PCI rom code to handle more broken ROMs
There are ROMs reporting that their size exceeds their PCI ROM
resource window. This patch returns the minimum of the resource window
size or the size in the ROM. An example of this breakage is the XGI
Volari Z7.
This patch was sent first time very long time ago,
but magically was disapeared, it probably exists
in your queue, but to be sure, I resend it.
If can not be applied cleanly after your w1 queue is flushed
into upstrem tree, just drop it.
Thanks.
Patch from Michael Farmbauer <michl@baldrian.franken.de>.
Jean Delvare [Fri, 29 Jul 2005 19:15:33 +0000 (12:15 -0700)]
[PATCH] I2C: 24RF08 corruption prevention (again)
The 24RF08 corruption prevention in the eeprom and max6875 drivers wasn't
complete. For one thing, the additional quick write should happen as soon
as possible and unconditionally, while both drivers had error paths before.
For another, when a given chip is forced, the core does not emit a quick
write, so a second quick write would cause the corruption rather than
prevent it.
I plan to move the corruption prevention in the core in the long run, so
that individual drivers don't have to care anymore. But I need to merge
i2c_probe and i2c_detect before I do (work in progress).
Jean Delvare [Fri, 29 Jul 2005 19:15:07 +0000 (12:15 -0700)]
[PATCH] I2C: Missing space in split strings
A few split string in i2c (and now hwmon) drivers lack a joining space,
causing them to display incorrectly. This trivial patch fixes that up.
Please apply, thanks.
Ladislav Michl [Fri, 29 Jul 2005 19:15:00 +0000 (12:15 -0700)]
[PATCH] I2C: ds1337 - fix 12/24 hour mode bug
DS1339 manual, page 6, chapter Date and time operation:
The DS1339 can be run in either 12-hour or 24-hour mode. Bit 6 of the
hours register is defined as the 12-hour or 24-hour mode-select bit.
When high, the 12-hour mode is selected.
Patch below makes ds1337 driver work as documented in manual.
Maneesh Soni [Fri, 29 Jul 2005 19:14:19 +0000 (12:14 -0700)]
[PATCH] sysfs: fix sysfs_setattr
o sysfs_dirent's s_mode field should also be updated in sysfs_setattr(), else
there could be inconsistency in the two fields. s_mode is used while
->readdir so as not to bring in the inode to cache.
Maneesh Soni [Fri, 29 Jul 2005 19:13:35 +0000 (12:13 -0700)]
[PATCH] sysfs: fix sysfs_chmod_file
o sysfs_chmod_file() must update the new iattr field in sysfs_dirent else
the mode change will not be persistent in case of inode evacuation from
cache.
Dave Jones [Fri, 29 Jul 2005 19:55:40 +0000 (12:55 -0700)]
arch/i386/kernel/cpu/cpufreq/powernow-k8.c: In function `powernow_k8_cpu_init_acpi':
arch/i386/kernel/cpu/cpufreq/powernow-k8.c:740: warning: unused variable `vid'
arch/i386/kernel/cpu/cpufreq/powernow-k8.c:739: warning: unused variable `fid'
arch/i386/kernel/cpu/cpufreq/powernow-k8.c:743: warning: unused variable `vid'
arch/i386/kernel/cpu/cpufreq/powernow-k8.c:742: warning: unused variable `fid'
arch/i386/kernel/cpu/cpufreq/powernow-k8.c:746: `fid' undeclared (first use in this function)
arch/i386/kernel/cpu/cpufreq/powernow-k8.c:746: `vid' undeclared (first use in this function)
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
In an uncensored copy of code from i386 to x86_64 I wound up
with inline assembly with the wrong constraints. Use input
constraints instead of output constraints.
So I know the assembler will do the right thing specify the size
of the operand lidtq and lgdtq instead of just lidt and lgdt.
Make load_segments use an input constraint, and delete the macro fun.
Without having to reload %cs like I do on i386 this code is noticeably
simpler.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For some reason I was telling my inline assembly that the
input argument was an output argument.
Playing in the trampoline code I have seen a couple of
instances where lgdt get the wrong size (because the
trampolines run in 16bit mode) so use lgdtl and lidtl to
be explicit.
Additionally gcc-3.3 and gcc-3.4 want's an lvalue for a
memory argument and it doesn't think an array of characters
is an lvalue so use a packed structure instead.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] reboot: remove device_suspend(PMSG_FREEZE) from kernel_kexec
If device_suspend(PMSG_FREEZE) is not ready to be called in
kernel_restart it is definitely not ready to be called in the even more
fickle kernel_kexec.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Russell King [Fri, 29 Jul 2005 15:36:48 +0000 (16:36 +0100)]
[ARM SMP] Ensure secondary CPUs see their pen release
Since the secondary CPUs will not be operating in symetric mode
while they are held in the pen, we need to ensure that the write
to pen_release is visible to them, by flushing the cache.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Stephen Smalley [Fri, 29 Jul 2005 04:16:21 +0000 (21:16 -0700)]
[PATCH] selinux: Fix address length checks in connect hook
This patch fixes the address length checks in the selinux_socket_connect
hook to be no more restrictive than the underlying ipv4 and ipv6 code;
otherwise, this hook can reject valid connect calls. This patch is in
response to a bug report where an application was calling connect on an
INET6 socket with an address that didn't include the optional scope id and
failing due to these checks.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dave Hansen [Fri, 29 Jul 2005 04:16:18 +0000 (21:16 -0700)]
[PATCH] re-disable TSC on NUMAQ
Somewhere recently, the TSC got re-enabled for timekeeping on NUMAQ
machines. However, the hardware makes these get unsynchronized quite
badly. So badly, in fact, that the code to fix up the skew can just hang
on boot.
This patch re-disables them. It's nicely confined to the numaq.c file. It
would be great if this could make it into 2.6.13, I think it counts as a
bugfix.
Tested on a 16-proc 4-node NUMAQ.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
George Anzinger [Fri, 29 Jul 2005 04:16:16 +0000 (21:16 -0700)]
[PATCH] posix timers: fix normalization problem
(We found this (after a customer complained) and it is in the kernel.org
kernel. Seems that for CLOCK_MONOTONIC absolute timers and clock_nanosleep
calls both the request time and wall_to_monotonic are subtracted prior to
the normalize resulting in an overflow in the existing normalize test.
This causes the result to be shifted ~4 seconds ahead instead of ~2 seconds
back in time.)
The normalize code in posix-timers.c fails when the tv_nsec member is ~1.2
seconds negative. This can happen on absolute timers (and
clock_nanosleeps) requested on CLOCK_MONOTONIC (both the request time and
wall_to_monotonic are subtracted resulting in the possibility of a number
close to -2 seconds.)
This fix uses the set_normalized_timespec() (which does not have an
overflow problem) to fix the problem and as a side effect makes the code
cleaner.
Signed-off-by: George Anzinger <george@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christophe Lucas [Fri, 29 Jul 2005 04:16:12 +0000 (21:16 -0700)]
[PATCH] uml: Clean up prink calls
printk() calls should include appropriate KERN_* constant.
Signed-off-by: Christophe Lucas <clucas@rotomalug.org> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bodo Stroesser [Fri, 29 Jul 2005 04:16:11 +0000 (21:16 -0700)]
[PATCH] uml: Fix typo
Fix a typo in wait_stub_done.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Fri, 29 Jul 2005 04:16:09 +0000 (21:16 -0700)]
[PATCH] uml: Fix load average >=1
update_process_times was missing its irq_enter/irq_exit wrapper. This caused
ksoftirqd to be scheduled on every clock tick.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Fri, 29 Jul 2005 04:16:08 +0000 (21:16 -0700)]
[PATCH] uml: Fix redundant assignment
By this point, .is_user has already been set, so this assignment is useless.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bodo Stroesser [Fri, 29 Jul 2005 04:16:06 +0000 (21:16 -0700)]
[PATCH] uml: Fix skas0 stub return
It's wrong to pop a fixed number of words from stack before calling sigreturn,
as the number depends on what code is generated by the compiler for the start
of stub_segv_handler(). What we need is esp containing the address of
sigcontext. So we explicitly load that pointer into esp.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>