]> err.no Git - linux-2.6/log
linux-2.6
19 years ago[PATCH] kbuild: signed/unsigned char fix for make menuconfig
Keenan Pepper [Wed, 27 Jul 2005 18:14:00 +0000 (14:14 -0400)]
[PATCH] kbuild: signed/unsigned char fix for make menuconfig

Quiet some silly warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: fix building external modules
Sam Ravnborg [Wed, 27 Jul 2005 20:11:01 +0000 (22:11 +0200)]
kbuild: fix building external modules

kbuild failed to locate Makefile for external modules.
This brought to my attention how the variables for directories
have different values in different usage scenarios.

Different kbuild usage scenarios:
make       - plain make in same directory where kernel source lives
make O=    - kbuild is told to store output files in another directory
make M=    - building an external module
make O= M= - building an external module with kernel output seperate from src

Value assigned to the different variables:

           |$(src)          |$(obj) |$(srctree)        |$(objtree)
make       |reldir to k src |as src |abs path to k src |abs path to k src
make O=    |reldir to k src |as src |abs path to k src |abs path to output dir
make M=    |abs path to src |as src |abs path to k src |abs path to k src
make O= M= |abs path to src |as src |abs path to k src |abs path to k output

path to kbuild file:

make       | $(srctree)/$(src), $(src)
make O=    | $(srctree)/$(src)
make M=    | $(src)
make O= M= | $(src)

From the table above it can be seen that the only good way to find the
home directory of the kbuild file is to locate the one of the two variants
that is an absolute path. If $(src) is an absolute path (starts with /)
then use it, otherwise prefix $(src) with $(srctree).

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: silence mystery message
Sam Ravnborg [Wed, 27 Jul 2005 09:39:37 +0000 (11:39 +0200)]
kbuild: silence mystery message

During last phase of the build the following message were displayed:
/bin/sh: +@: command not found

This message appears due to slightly changed semantics
of cmd and if_changed_rule.
The easy fix was to insert a dummy command first in rule_ksym_ld.
The alternative was to redo part of this processing in the top-level
Makefile - a volatile area that I try to avoid.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years agokbuild: pass less variables to second make invocation when using make O=...
Sam Ravnborg [Wed, 27 Jul 2005 07:12:07 +0000 (09:12 +0200)]
kbuild: pass less variables to second make invocation when using make O=...

make exports all variables assigned on the command-line, so no need to pass
them explicit.
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=4725

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years agokbuild: KBUILD_VERBOSE was exported twice
Sam Ravnborg [Wed, 27 Jul 2005 06:10:10 +0000 (08:10 +0200)]
kbuild: KBUILD_VERBOSE was exported twice

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=4727

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years ago[PATCH] kallsyms: clarify KALLSYMS_ALL help text
Jesper Juhl [Wed, 20 Jul 2005 03:43:05 +0000 (05:43 +0200)]
[PATCH] kallsyms: clarify KALLSYMS_ALL help text

Clarify the KALLSYMS_ALL help text slightly.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
19 years agokbuild: define clean before including kbuild file
Sam Ravnborg [Mon, 25 Jul 2005 22:41:12 +0000 (22:41 +0000)]
kbuild: define clean before including kbuild file

Defining clean before including the kbuild file give us knowledge when
the kbuild file is included for cleaning. This is rarey usefull - but in
a corner case in klibc this proved necessary.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years agokbuild: fix make O=...
Sam Ravnborg [Mon, 25 Jul 2005 20:26:04 +0000 (20:26 +0000)]
kbuild: fix make O=...

kbuild failed to locate Kbuild.include.
Teach kbuild how to find Kbuild files when using make O=...

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years agokbuild: introduce Kbuild.include
Sam Ravnborg [Mon, 25 Jul 2005 20:10:36 +0000 (20:10 +0000)]
kbuild: introduce Kbuild.include

Kbuild.include is a placeholder for definitions originally present in
both the top-level Makefile and scripts/Makefile.build.
There were a slight difference in the filechk definition, so the most videly
used version was kept and usr/Makefile was adopted for this syntax.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years agokbuild: drop descend - converting existing users
Sam Ravnborg [Mon, 25 Jul 2005 12:51:08 +0000 (12:51 +0000)]
kbuild: drop descend - converting existing users

There was only two users left of descend. Fix them so they
use $(clean)= and $(build)=.
Drop definition of descend.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years agokbuild: drop -Wundef from HOSTCFLAGS for now
Sam Ravnborg [Mon, 25 Jul 2005 12:40:34 +0000 (12:40 +0000)]
kbuild: drop -Wundef from HOSTCFLAGS for now

-Wundef caused warnings in the bison generated code in kconfig.
Updating to a newer bison (1.875d) did not fix it. The alternatives
was to correct the autogenerated code or drop -Wundef.
For now -Wundef is dropped from HOSTCFLAGS.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---

19 years ago[PATCH] kbuild: make help binrpm-pkg fix
Coywolf Qi Hunt [Tue, 19 Jul 2005 14:42:54 +0000 (09:42 -0500)]
[PATCH] kbuild: make help binrpm-pkg fix

This fixes kbuild make help binrpm-pkg missing `''.

Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: add -Wundef to global CFLAGS
Olaf Hering [Thu, 21 Jul 2005 19:02:09 +0000 (21:02 +0200)]
[PATCH] kbuild: add -Wundef to global CFLAGS

A recent change to the aic scsi driver removed two defines to detect
endianness. cpp handles undefined strings as 0. As a result, the test turned
into #if 0 == 0 and the wrong code was selected.
Adding -Wundef to global CFLAGS will catch such errors.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: When checking depmod version, redirect stderr
Tom Rini [Fri, 15 Jul 2005 14:56:36 +0000 (07:56 -0700)]
[PATCH] kbuild: When checking depmod version, redirect stderr

When running depmod to check for the correct version number, extra
output we don't need to see, such as "depmod: QM_MODULES: Function not
implemented" may show up.  Redirect stderr to /dev/null as the version
information that we do care about comes to stdout.

Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: fix make O=... build
Sam Ravnborg [Thu, 14 Jul 2005 20:28:49 +0000 (20:28 +0000)]
kbuild: fix make O=... build

It fixes the following error:

make[1]: *** No rule to make target `include/asm', needed by `arch/alpha/kernel/asm-offsets.s'.  Stop.

Reported by:
From: Jan Dittmer <j.dittmer@portrix.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: Fix bug in make deb-pkg when using seperate source and output directories
Sam Ravnborg [Thu, 14 Jul 2005 20:26:09 +0000 (20:26 +0000)]
kbuild: Fix bug in make deb-pkg when using seperate source and output directories

From: Ryan Anderson <ryan@michonline.com>

When running "make O=something deb-pkg", I get a failure that claims I
haven't configured my kernel (I have).  Running it a second time tells
me to run "make mrproper"  (include/linux/version.h got built on the
first run)

Original patch from:
From: Ajay Patel <patela@gmail.com>

With modifications from:
Signed-off-By: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agouml: Restore proper descriptions in make deb-pkg target
Sam Ravnborg [Thu, 14 Jul 2005 20:24:56 +0000 (20:24 +0000)]
uml: Restore proper descriptions in make deb-pkg target

From: Ryan Anderson <ryan@michonline.com>

This pulls the description from the Debian user-mode-linux package, and
puts $version back in the appropriate places for both descriptions.

Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agouml: Make deb-pkg build target build a Debian-style user-mode-linux package
Sam Ravnborg [Thu, 14 Jul 2005 20:24:00 +0000 (20:24 +0000)]
uml: Make deb-pkg build target build a Debian-style user-mode-linux package

From: Ryan Anderson <ryan@michonline.com>

Make the deb-pkg build target understand the "um" arch and set up the
package and directory structure to match a mainline-Debian style
user-mode-linux package.

This is primarily so that it stops matching, exactly, the naming
convention used by normal, non-UML kernels generated by this command.

Installing "linux-2.6.11" and "linux-2.6.11", where one is a UML kernel
doesn't do the right thing.  This fixes that.

Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: Don't fail if include/asm symlink exists
Sam Ravnborg [Thu, 14 Jul 2005 20:22:39 +0000 (20:22 +0000)]
kbuild: Don't fail if include/asm symlink exists

From: Andreas Gruenbacher <agruen@suse.de>

We're having the following situation: There are user-space applications
that include kernel headers directly. With a completely unconfigured
/usr/src/linux tree, including most headers fails because essential
files are not there:

include/asm
include/linux/autoconf.h
include/linux/version.h

So we create these files. On the other hand, we want to use
/usr/src/linux as read-only source for building kernels or additional
modules. Now when building a kernel with a separate output directory
(O=), there is a check in the main makefile for the include/asm symlink.
There is no real need for this check: if we ensure that
$(objdir)/include/asm is always created as the patch does,
$(srctree)/include/asm becomes irrelevant.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: fix buildcheck
Sam Ravnborg [Thu, 14 Jul 2005 20:20:13 +0000 (20:20 +0000)]
kbuild: fix buildcheck

From: Randy Dunlap <rddunlap@osdl.org>

I should not have added init.text test here;
it's more than useless, it actually degrades the output.

Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: Add target debug_kallsyms
Sam Ravnborg [Thu, 14 Jul 2005 20:19:08 +0000 (20:19 +0000)]
kbuild: Add target debug_kallsyms

From: Keith Owens <kaos@ocs.com.au>

Make it easier to generate maps for debugging kallsyms problems.
debug_kallsyms is only a debugging target so no help or silent mode.

Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: "PREEMPT" in UTS_VERSION
Sam Ravnborg [Thu, 14 Jul 2005 20:18:07 +0000 (20:18 +0000)]
kbuild: "PREEMPT" in UTS_VERSION

From: Matt Mackall <mpm@selenic.com>

Add PREEMPT to UTS_VERSION where enabled as is done for SMP to make
preempt kernels easily identifiable.
Added SMP PREEMPT as comment in compile.h to force it to be
updated when they change (sam).

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: Avoid inconsistent kallsyms data
Sam Ravnborg [Thu, 14 Jul 2005 20:15:44 +0000 (20:15 +0000)]
kbuild: Avoid inconsistent kallsyms data

Several reports on inconsistent kallsyms data has been caused by the aliased symbols
__sched_text_start and __down to shift places in the output of nm.
The root cause was that on second pass ld aligned __sched_text_start to a 4 byte boundary
which is the function alignment on i386.
sched.text and spinlock.text is now aligned to an 8 byte boundary to make sure they
are aligned to a function alignemnt on most (all?) archs.

Tested by: Paulo Marques <pmarques@grupopie.com>
Tested by: Alexander Stohr <Alexander.Stohr@gmx.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agobuildcheck: reduce DEBUG_INFO noise from reference* scripts
Sam Ravnborg [Thu, 14 Jul 2005 20:14:42 +0000 (20:14 +0000)]
buildcheck: reduce DEBUG_INFO noise from reference* scripts

From: Randy Dunlap <rddunlap@osdl.org>

Reduce noise in 'make buildcheck' that is caused by CONFIG_DEBUG_INFO=y.

Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agokbuild: Fix build as root then user
Sam Ravnborg [Thu, 14 Jul 2005 20:12:40 +0000 (20:12 +0000)]
kbuild: Fix build as root then user

From: Matthew Wilcox <matthew@wil.cx>
I inadvertently built a tree as root and then rebuilt it as a user.  I
got a lot of prompts ...

mv: overwrite `drivers/char/drm/drm_auth.o', overriding mode 0644?

Using mv -f fixes that.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] scripts/kernel-doc: don't use uninitialized SRCTREE
Randy Dunlap [Thu, 7 Jul 2005 22:39:26 +0000 (15:39 -0700)]
[PATCH] scripts/kernel-doc: don't use uninitialized SRCTREE

Current kernel-doc (perl) script generates this warning:
Use of uninitialized value in concatenation (.) or string at scripts/kernel-doc line 1668.

So explicitly check for SRCTREE in the ENV before using it,
and then if it is set, append a '/' to the end of it, otherwise
the SRCTREE + filename can (will) be missing the intermediate '/'.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] Lindent: ignore .indent.pro
Jeff Mahoney [Wed, 13 Jul 2005 15:55:42 +0000 (11:55 -0400)]
[PATCH] Lindent: ignore .indent.pro

 When I recently submitted a Lindent patch, it turned out that my .indent.pro
 options were also applied to the tree. This patch directs indent(1) to ignore
 the .indent.pro directives and only use options specified on the command
 line.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: restrain output of "make help" to 80 columns
Yum Rayan [Thu, 9 Jun 2005 05:04:32 +0000 (22:04 -0700)]
[PATCH] kbuild: restrain output of "make help" to 80 columns

This patch fixes the output of "make help" to fit in a 80 column
screen. Please push upstream as part of your other patches.

Signed-off-by: Yum Rayan <yum.rayan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: obey HOSTLOADLIBES_programname for single-file compilation
Matthias Urlichs [Fri, 18 Feb 2005 09:23:41 +0000 (10:23 +0100)]
[PATCH] kbuild: obey HOSTLOADLIBES_programname for single-file compilation

Single-file HOSTCC calls added the libraries from $(HOSTLOADLIBES),
but not from $(HOSTLOADLIBES_programname). Multi-file HOSTCC calls do
both.

This patch fixes that inconsistency.

Signed-Off-By: Matthias Urlichs <smurf@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: allow cscope to index multiple architectures
Ian Campbell [Thu, 23 Jun 2005 10:25:54 +0000 (11:25 +0100)]
[PATCH] kbuild: allow cscope to index multiple architectures

I have a single source tree which I cross compile for a couple of
different architectures using ARHC=foo O=blah etc.

The existing cscope target is very handy but only indexes the current
$(ARCH), which is a pain since inevitably I'm interested in the other
one at any given time ;-). This patch allows me to pass a list of
architectures for cscope to index. e.g.
make ALLSOURCE_ARCHS="i386 arm" cscope

This change also works for etags etc, and I presume it is just as useful
there.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: make 'cscope -q' play well with cscope.el
Karl Hegbloom [Sun, 19 Jun 2005 07:50:47 +0000 (00:50 -0700)]
[PATCH] kbuild: make 'cscope -q' play well with cscope.el

I tried the Linux Makefile 'make cscope' target, and found that the
generated database is not compatible with 'cscope.el' under XEmacs.
The thing is that 'cscope.el' does not allow setting the command line
options to the 'cscope' commands it runs, and it errors with a message
about the options not matching the ones used to generate the index.

It turns out the cscope designers already thought of this.  The
options can be written into the "cscope.files".  The included patch
moves the "-q" and "-k" options from the 'cmd_cscope' to the
'cmd_cscope-file', echoing them into the top of the files listing.

Now the index is generated with the "-q" option, and when 'cscope.el'
performs it's search, it uses that argument as well.  Lookups are fast
and everyone is happy.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: add ia64 support to rpm Makefile target
Greg Edwards [Thu, 29 Jul 2004 18:07:32 +0000 (13:07 -0500)]
[PATCH] kbuild: add ia64 support to rpm Makefile target

On ia64, only the EFI (fat) partition is available to boot from.  The rpm
needs to install the kernel under /boot/efi to be useable on ia64.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: modpost needs to cope with new glibc elf header on sparc
Fabio Massimo Di Nitto [Wed, 13 Jul 2005 06:25:49 +0000 (08:25 +0200)]
[PATCH] kbuild: modpost needs to cope with new glibc elf header on sparc

Recently a change in the glibc elf.h header has been introduced causing
modpost to spawn tons of warnings (like the one below) building the kernel
on sparc:

[SNIP]
*** Warning: "current_thread_info_reg" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
*** Warning: "" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
*** Warning: "" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
[SNIP]

Ben Collins discovered that the STT_REGISTERED definition in glibc did change
and that this change needs to be propagated to modpost.

glibc change:
-#define STT_REGISTER   13              /* Global register reserved to app. */
+#define STT_SPARC_REGISTER     13      /* Global register reserved to app. */

I did and tested this simple patch to maintain compatibility with newer (>= 2.3.4)
and older (<= 2.3.2) glibc.

Signed-off-by: Fabio M. Di Nitto <fabbione@fabbione.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[PATCH] kbuild: create tarballs
Jan-Benedict Glaw [Tue, 24 May 2005 09:27:37 +0000 (11:27 +0200)]
[PATCH] kbuild: create tarballs

It adds tarball packaging, which I prefer for distribution.
Also one of the two blanks after @echo is removed. One seems to be enough :)

Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 11 Jul 2005 23:32:40 +0000 (16:32 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Mon, 11 Jul 2005 21:08:08 +0000 (14:08 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6

19 years ago[SPARC64]: Add missing asm-sparc64/seccomp.h file.
David S. Miller [Mon, 11 Jul 2005 20:44:56 +0000 (13:44 -0700)]
[SPARC64]: Add missing asm-sparc64/seccomp.h file.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IA64] assign_irq_vector() should not panic
Kenji Kaneshige [Mon, 11 Jul 2005 04:49:00 +0000 (21:49 -0700)]
[IA64] assign_irq_vector() should not panic

Current assign_irq_vector() will panic if interrupt vectors is running
out. But I think how to handle the case of lack of interrupt vectors
should be handled by the caller of this function. For example, some
PCI devices can raise the interrupt signal via both MSI and I/O
APIC. So even if the driver for these device fails to allocate a
vector for MSI, the driver still has a chance to use I/O APIC based
interrupt. But currently there is no chance for these driver to use
I/O APIC based interrupt because kernel will panic when
assign_irq_vector() fails to allocate interrupt vector.

The following patch changes assign_irq_vector() for ia64 to return
-ENOSPC on error instead of panic (as i386 and x86_64 versions do).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[IA64] use msleep_interruptible() instead of schedule_timeout
Nishanth Aravamudan [Sat, 9 Jul 2005 00:10:00 +0000 (17:10 -0700)]
[IA64] use msleep_interruptible() instead of schedule_timeout

Description: Replace schedule_timeout() with msleep_interruptible() to
guarantee the task delays as expected.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[PATCH] v850: Update mmu.h header to match implementation changes
Miles Bader [Mon, 11 Jul 2005 09:24:50 +0000 (18:24 +0900)]
[PATCH] v850: Update mmu.h header to match implementation changes

Signed-off-by: Miles Bader <miles@gnu.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] v850: Update checksum.h to match changed function signatures
Miles Bader [Mon, 11 Jul 2005 09:24:50 +0000 (18:24 +0900)]
[PATCH] v850: Update checksum.h to match changed function signatures

Signed-off-by: Miles Bader <miles@gnu.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6
Linus Torvalds [Mon, 11 Jul 2005 17:18:18 +0000 (10:18 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 11 Jul 2005 17:09:59 +0000 (10:09 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

19 years ago[IA64] remove linux/version.h include from arch/ia64
Olaf Hering [Sun, 10 Jul 2005 19:35:00 +0000 (12:35 -0700)]
[IA64] remove linux/version.h include from arch/ia64

changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years agoAuto merge with /home/aegl/GIT/linus
Tony Luck [Mon, 11 Jul 2005 16:43:11 +0000 (09:43 -0700)]
Auto merge with /home/aegl/GIT/linus

19 years ago[SPARC64]: Add syscall auditing support.
David S. Miller [Mon, 11 Jul 2005 02:29:45 +0000 (19:29 -0700)]
[SPARC64]: Add syscall auditing support.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Pass regs and entry/exit boolean to syscall_trace()
David S. Miller [Sun, 10 Jul 2005 23:55:48 +0000 (16:55 -0700)]
[SPARC64]: Pass regs and entry/exit boolean to syscall_trace()

Also fix a bug in 32-bit syscall tracing.  We forgot to update
this code when we moved over to the convention that all 32-bit
syscall arguments are zero extended by default.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Add SECCOMP support.
David S. Miller [Sun, 10 Jul 2005 23:49:28 +0000 (16:49 -0700)]
[SPARC64]: Add SECCOMP support.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Kill ancient and unused SYSCALL_TRACING debugging code.
David S. Miller [Sun, 10 Jul 2005 22:56:40 +0000 (15:56 -0700)]
[SPARC64]: Kill ancient and unused SYSCALL_TRACING debugging code.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Add __read_mostly support.
David S. Miller [Sun, 10 Jul 2005 22:45:11 +0000 (15:45 -0700)]
[SPARC64]: Add __read_mostly support.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC]: Add ioprio system call support.
David S. Miller [Sun, 10 Jul 2005 22:11:45 +0000 (15:11 -0700)]
[SPARC]: Add ioprio system call support.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoMerge master.kernel.org:~rmk/linux-2.6-arm.git
Linus Torvalds [Sun, 10 Jul 2005 19:57:49 +0000 (12:57 -0700)]
Merge master.kernel.org:~rmk/linux-2.6-arm.git

19 years ago[PATCH] remove asm-xtensa/ipc.h
Stephen Rothwell [Sun, 10 Jul 2005 13:12:01 +0000 (23:12 +1000)]
[PATCH] remove asm-xtensa/ipc.h

Now that sys_ipc has been removed from xtensa, asm/ipc.h is no longer
needed for that architecture.  Not tested, but obviously correct.  This
file is included only from arch code and this patch also removes the only
inclusion.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Sync up ieee-1394
Ben Collins [Sun, 10 Jul 2005 00:01:23 +0000 (20:01 -0400)]
[PATCH] Sync up ieee-1394

Lots of this patch is trivial code cleanups (static vars were being
intialized to 0, etc).

There's also some fixes for ISO transmits (max buffer handling).
Aswell, we have a few fixes to disable IRM capabilites correctly.  We've
also disabled, by default some generally unused EXPORT symbols for the
sake of cleanliness in the kernel.  However, instead of removing them
completely, we felt it necessary to have a config option that allowed
them to be enabled for the many projects outside of the main kernel tree
that use our API for driver development.

The primary reason for this patch is to revert a MODE6->MODE10 RBC
conversion patch from the SCSI maintainers.  The new conversions handled
directly in the scsi layer do not seem to work for SBP2.  This patch
reverts to our old working code so that users can enjoy using Firewire
disks and dvd drives again.

We are working with the SCSI maintainers to resolve this issue outside
of the main kernel tree.  We'll merge the patch once the SCSI layer's
handling of the MODE10 conversion is working for us.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ARM: 2803/1: OMAP update 11/11: Add cpufreq support
Tony Lindgren [Sun, 10 Jul 2005 18:58:20 +0000 (19:58 +0100)]
[PATCH] ARM: 2803/1: OMAP update 11/11: Add cpufreq support

Patch from Tony Lindgren

This patch adds minimal cpufreq support for OMAP
taking advantage of the clock framework.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2805/1: OMAP update 10/11: Update H2 defconfig
Tony Lindgren [Sun, 10 Jul 2005 18:58:19 +0000 (19:58 +0100)]
[PATCH] ARM: 2805/1: OMAP update 10/11: Update H2 defconfig

Patch from Tony Lindgren

This patch updates H2 defconfig.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2804/1: OMAP update 9/11: Update OMAP arch files
Tony Lindgren [Sun, 10 Jul 2005 18:58:18 +0000 (19:58 +0100)]
[PATCH] ARM: 2804/1: OMAP update 9/11: Update OMAP arch files

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific arch files with the linux-omap tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2802/1: OMAP update 8/11: Update OMAP arch files
Tony Lindgren [Sun, 10 Jul 2005 18:58:17 +0000 (19:58 +0100)]
[PATCH] ARM: 2802/1: OMAP update 8/11: Update OMAP arch files

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific arch files with the linux-omap tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omap
Tony Lindgren [Sun, 10 Jul 2005 18:58:15 +0000 (19:58 +0100)]
[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omap

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2809/1: OMAP update 7b/11: Move arch-omap to plat-omap
Tony Lindgren [Sun, 10 Jul 2005 18:58:14 +0000 (19:58 +0100)]
[PATCH] ARM: 2809/1: OMAP update 7b/11: Move arch-omap to plat-omap

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2807/1: OMAP update 7a/11: Move arch-omap to plat-omap
Tony Lindgren [Sun, 10 Jul 2005 18:58:13 +0000 (19:58 +0100)]
[PATCH] ARM: 2807/1: OMAP update 7a/11: Move arch-omap to plat-omap

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2801/1: OMAP update 6/11: Split OMAP1 common code into id, io and serial
Tony Lindgren [Sun, 10 Jul 2005 18:58:12 +0000 (19:58 +0100)]
[PATCH] ARM: 2801/1: OMAP update 6/11: Split OMAP1 common code into id, io and serial

Patch from Tony Lindgren

This patch by Juha Yrjölä and other OMAP developers splits
OMAP1 specific common code into OMAP1 id, io, and serial
code in mach-omap1 directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2806/1: OMAP update 5/11: Move board files into mach-omap1 directory
Tony Lindgren [Sun, 10 Jul 2005 18:58:11 +0000 (19:58 +0100)]
[PATCH] ARM: 2806/1: OMAP update 5/11: Move board files into mach-omap1 directory

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 board files into mach-omap1 directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2799/1: OMAP update 4/11: Move OMAP1 LED code into mach-omap1 directory
Tony Lindgren [Sun, 10 Jul 2005 18:58:10 +0000 (19:58 +0100)]
[PATCH] ARM: 2799/1: OMAP update 4/11: Move OMAP1 LED code into mach-omap1 directory

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 specific LED code into mach-omap1 directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2800/1: OMAP update 3/11: Move OMAP1 core code into mach-omap1 directory
Tony Lindgren [Sun, 10 Jul 2005 18:58:09 +0000 (19:58 +0100)]
[PATCH] ARM: 2800/1: OMAP update 3/11: Move OMAP1 core code into mach-omap1 directory

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 specific IRQ, time, and FPGA code into
mach-omap1 directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 and omap2
Tony Lindgren [Sun, 10 Jul 2005 18:58:08 +0000 (19:58 +0100)]
[PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 and omap2

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers modifies
ARM specific Kconfig to allow sharing code between OMAP1 and
OMAP2 architectures.
In order to share code between OMAP1 and OMAP2, all OMAP1
specific code is moved into mach-omap1 directory in the
following patch. A new mach-omap2 directory will be added
later on.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2797/1: OMAP update 1/11: Update include files
Tony Lindgren [Sun, 10 Jul 2005 18:58:06 +0000 (19:58 +0100)]
[PATCH] ARM: 2797/1: OMAP update 1/11: Update include files

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific include files with the linux-omap tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2796/1: Fix ARMv5[TEJ] check in MMU initalization
Deepak Saxena [Sun, 10 Jul 2005 18:44:55 +0000 (19:44 +0100)]
[PATCH] ARM: 2796/1: Fix ARMv5[TEJ] check in MMU initalization

Patch from Deepak Saxena

The code in mm-armv.c checks for the condition (cpu_architecture()<= ARMv5)
in a few places but should be checking for ARMv5TEJ as the MMU is shared
across all v5 variations.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2795/1: update ixp2000 defconfigs
Lennert Buytenhek [Sun, 10 Jul 2005 18:44:54 +0000 (19:44 +0100)]
[PATCH] ARM: 2795/1: update ixp2000 defconfigs

Patch from Lennert Buytenhek

Update the ixp2000 defconfigs from 2.6.12-git6 to 2.6.13-rc2.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2793/1: platform serial support for ixp2000
Lennert Buytenhek [Sun, 10 Jul 2005 18:44:53 +0000 (19:44 +0100)]
[PATCH] ARM: 2793/1: platform serial support for ixp2000

Patch from Lennert Buytenhek

This patch converts the ixp2000 serial port over to a platform
serial device.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agodrm: fix stupid missing semicolon.
Dave Airlie [Sun, 10 Jul 2005 02:46:19 +0000 (12:46 +1000)]
drm: fix stupid missing semicolon.

I fixed this in one git tree but that wasn't the one I pushed...

Signed-off-by: Dave Airlie <airlied@linux.ie>
19 years agoMerge head 'drm-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6
Linus Torvalds [Sat, 9 Jul 2005 16:59:23 +0000 (09:59 -0700)]
Merge head 'drm-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6

19 years agoMerge head 'drm-3264' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6
Linus Torvalds [Sat, 9 Jul 2005 16:58:47 +0000 (09:58 -0700)]
Merge head 'drm-3264' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6

19 years agoMerge head 'drm-via' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6
Linus Torvalds [Sat, 9 Jul 2005 16:58:01 +0000 (09:58 -0700)]
Merge head 'drm-via' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sat, 9 Jul 2005 16:29:09 +0000 (09:29 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

19 years ago[SCTP]: Use struct list_head for chunk lists, not sk_buff_head.
David S. Miller [Sat, 9 Jul 2005 04:47:49 +0000 (21:47 -0700)]
[SCTP]: Use struct list_head for chunk lists, not sk_buff_head.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV6]: Fix warning in ip6_mc_msfilter.
David S. Miller [Sat, 9 Jul 2005 04:44:39 +0000 (21:44 -0700)]
[IPV6]: Fix warning in ip6_mc_msfilter.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: fix IPv4 leave-group group matching
David L Stevens [Sat, 9 Jul 2005 00:48:38 +0000 (17:48 -0700)]
[IPV4]: fix IPv4 leave-group group matching

        This patch fixes the multicast group matching for
IP_DROP_MEMBERSHIP, similar to the IP_ADD_MEMBERSHIP fix in a prior
patch. Groups are identifiedby <group address,interface> and including
the interface address in the match will fail if a leave-group is done
by address when the join was done by index, or if different addresses
on the same interface are used in the join and leave.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: (INCLUDE,empty)/leave-group equivalence for full-state MSF APIs & errno fix
David L Stevens [Sat, 9 Jul 2005 00:47:28 +0000 (17:47 -0700)]
[IPV4]: (INCLUDE,empty)/leave-group equivalence for full-state MSF APIs & errno fix

1) Adds (INCLUDE, empty)/leave-group equivalence to the full-state
   multicast source filter APIs (IPv4 and IPv6)

2) Fixes an incorrect errno in the IPv6 leave-group (ENOENT should be
   EADDRNOTAVAIL)

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: multicast API "join" issues
David L Stevens [Sat, 9 Jul 2005 00:45:16 +0000 (17:45 -0700)]
[IPV4]: multicast API "join" issues

1) In the full-state API when imsf_numsrc == 0
   errno should be "0", but returns EADDRNOTAVAIL

2) An illegal filter mode change
   errno should be EINVAL, but returns EADDRNOTAVAIL

3) Trying to do an any-source option without IP_ADD_MEMBERSHIP
   errno should be EINVAL, but returns EADDRNOTAVAIL

4) Adds comments for the less obvious error return values

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: multicast API "join" issues
David L Stevens [Sat, 9 Jul 2005 00:39:23 +0000 (17:39 -0700)]
[IPV4]: multicast API "join" issues

1) Changes IP_ADD_SOURCE_MEMBERSHIP and MCAST_JOIN_SOURCE_GROUP to ignore
   EADDRINUSE errors on a "courtesy join" -- prior membership or not
   is ok for these.

2) Adds "leave group" equivalence of (INCLUDE, empty) filters in the
   delta-based API. Without this, mixing delta-based API calls that
   end in an (INCLUDE, empty) filter would not allow a subsequent
   regular IP_ADD_MEMBERSHIP. It also frees socket buffer memory that
   isn't needed for both the multicast group record and source filter.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: multicast API "join" issues
David L Stevens [Sat, 9 Jul 2005 00:38:07 +0000 (17:38 -0700)]
[IPV4]: multicast API "join" issues

        This patch corrects a few problems with the IP_ADD_MEMBERSHIP
socket option:

1) The existing code makes an attempt at reference counting joins when
   using the ip_mreqn/imr_ifindex interface. Joining the same group
   on the same socket is an error, whatever the API. This leads to
   unexpected results when mixing ip_mreqn by index with ip_mreqn by
   address, ip_mreq, or other API's. For example, ip_mreq followed by
   ip_mreqn of the same group will "work" while the same two reversed
   will not.
           Fixed to always return EADDRINUSE on a duplicate join and
   removed the (now unused) reference count in ip_mc_socklist.

2) The group-search list in ip_mc_join_group() is comparing a full
   ip_mreqn structure and all of it must match for it to find the
   group. This doesn't correctly match a group that was joined with
   ip_mreq or ip_mreqn with an address (with or without an index). It
   also doesn't match groups that are joined by different addresses on
   the same interface. All of these are the same multicast group,
   which is identified by group address and interface index.
           Fixed the check to correctly match groups so we don't get
   duplicate group entries on the ip_mc_socklist.

3) The old code allocates a multicast address before searching for
   duplicates requiring it to free in various error cases. This
   patch moves the allocate until after the search and
   igmp_max_memberships check, so never a need to allocate, then free
   an entry.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Apply sysctl_icmp_echo_ignore_broadcasts to ICMP_TIMESTAMP as well.
Alexey Kuznetsov [Sat, 9 Jul 2005 00:34:46 +0000 (17:34 -0700)]
[IPV4]: Apply sysctl_icmp_echo_ignore_broadcasts to ICMP_TIMESTAMP as well.

This was the full intention of the original code.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Support CONFIG_HZ
David S. Miller [Fri, 8 Jul 2005 22:21:51 +0000 (15:21 -0700)]
[SPARC64]: Support CONFIG_HZ

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Fix sparse warnings
Victor Fusco [Fri, 8 Jul 2005 21:57:47 +0000 (14:57 -0700)]
[NET]: Fix sparse warnings

From: Victor Fusco <victor@cetuc.puc-rio.br>

Fix the sparse warning "implicit cast to nocast type"

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Transform skb_queue_len() binary tests into skb_queue_empty()
David S. Miller [Fri, 8 Jul 2005 21:57:23 +0000 (14:57 -0700)]
[NET]: Transform skb_queue_len() binary tests into skb_queue_empty()

This is part of the grand scheme to eliminate the qlen
member of skb_queue_head, and subsequently remove the
'list' member of sk_buff.

Most users of skb_queue_len() want to know if the queue is
empty or not, and that's trivially done with skb_queue_empty()
which doesn't use the skb_queue_head->qlen member and instead
uses the queue list emptyness as the test.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Typo in dtlb_backend.S, _PAGE_SZ4M --> _PAGE_SZ4MB
David S. Miller [Fri, 8 Jul 2005 20:33:10 +0000 (13:33 -0700)]
[SPARC64]: Typo in dtlb_backend.S, _PAGE_SZ4M --> _PAGE_SZ4MB

Noticed by Eddie C. Dost

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IA64] Fix a typo in arch/ia64/kernel/entry.S
H. J. Lu [Fri, 8 Jul 2005 19:25:00 +0000 (12:25 -0700)]
[IA64] Fix a typo in arch/ia64/kernel/entry.S

Both 2.4 and 2.6 kernels need this patch for the next binutils.

Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years agoAuto merge with /home/aegl/GIT/linus
Tony Luck [Fri, 8 Jul 2005 15:52:42 +0000 (08:52 -0700)]
Auto merge with /home/aegl/GIT/linus

19 years ago[PATCH] Add MAINTAINERS entry for audit subsystem
Chris Wright [Fri, 8 Jul 2005 01:12:23 +0000 (18:12 -0700)]
[PATCH] Add MAINTAINERS entry for audit subsystem

I've been asked about this a couple times, and there's no info in
MAINTAINERS file.  Add MAINTAINERS entry for audit subsystem.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] device-mapper: dm-raid1: Limit bios to size of mirror region
Alasdair G Kergon [Fri, 8 Jul 2005 00:59:34 +0000 (17:59 -0700)]
[PATCH] device-mapper: dm-raid1: Limit bios to size of mirror region

Set the target's split_io field when building a dm-mirror device so
incoming bios won't span the mirror's internal regions.  Without this,
regions can be accessed while not holding correct locks and data corruption
is possible.

Reported-By: "Zhao Qian" <zhaoqian@aaastor.com>
From: Kevin Corry <kevcorry@us.ibm.com>
Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] video doc: one more system where video works with S3
Pavel Machek [Fri, 8 Jul 2005 00:59:33 +0000 (17:59 -0700)]
[PATCH] video doc: one more system where video works with S3

One more system where video works with S3.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m32r: framebuffer device support
Hirokazu Takata [Fri, 8 Jul 2005 00:59:32 +0000 (17:59 -0700)]
[PATCH] m32r: framebuffer device support

This patch is for supporting Epson s1d13xxx framebuffer device for m32r.  #
Sorry, a little bigger.

The Epson s1d13806 is already supported by 2.6.12 kernel, and its driver is
placed as drivers/video/s1d13xxxfb.c.

For the m32r, a header file include/asm-m32r/s1d13806.h was prepared for
several m32r target platforms.  It was originally generated by an Epson
tool S1D13806CFG.EXE, and modified manually for the m32r platforms.

Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsd4: fix fh_expire_type
NeilBrown [Fri, 8 Jul 2005 00:59:30 +0000 (17:59 -0700)]
[PATCH] nfsd4: fix fh_expire_type

After discussion at the recent NFSv4 bake-a-thon, I realized that my
assumption that NFS4_FH_PERSISTENT required filehandles to persist was a
misreading of the spec.  This also fixes an interoperability problem with the
Solaris client.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsd4: check lock type against openmode.
NeilBrown [Fri, 8 Jul 2005 00:59:27 +0000 (17:59 -0700)]
[PATCH] nfsd4: check lock type against openmode.

We shouldn't be allowing, e.g., write locks on files not open for read.  To
enforce this, we add a pointer from the lock stateid back to the open stateid
it came from, so that the check will continue to be correct even after the
open is upgraded or downgraded.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsd4: clean up nfs4_preprocess_seqid_op
NeilBrown [Fri, 8 Jul 2005 00:59:26 +0000 (17:59 -0700)]
[PATCH] nfsd4: clean up nfs4_preprocess_seqid_op

As long as we're here, do some miscellaneous cleanup.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsd4: clarify close_lru handling
NeilBrown [Fri, 8 Jul 2005 00:59:25 +0000 (17:59 -0700)]
[PATCH] nfsd4: clarify close_lru handling

The handling of close_lru in preprocess_stateid_op was a source of some
confusion here recently.  Try to make the logic a little clearer, by renaming
find_openstateowner_id to make its purpose clearer and untangling some
unnecessarily complicated goto's.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsd4: renew lease on seqid modifying operations
NeilBrown [Fri, 8 Jul 2005 00:59:24 +0000 (17:59 -0700)]
[PATCH] nfsd4: renew lease on seqid modifying operations

nfs4_preprocess_seqid_op is called by NFSv4 operations that imply an implicit
renewal of the client lease.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsd4: return better error on io incompatible with open mode
NeilBrown [Fri, 8 Jul 2005 00:59:23 +0000 (17:59 -0700)]
[PATCH] nfsd4: return better error on io incompatible with open mode

from RFC 3530:
"Share reservations are established by OPEN operations and by their
nature are mandatory in that when the OPEN denies READ or WRITE
operations, that denial results in such operations being rejected
with error NFS4ERR_LOCKED."

(Note that share_denied is really only a legal error for OPEN.)

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nfsd4: always update stateid on open
NeilBrown [Fri, 8 Jul 2005 00:59:22 +0000 (17:59 -0700)]
[PATCH] nfsd4: always update stateid on open

An OPEN from the same client/open stateowner requires a stateid update because
of the share/deny access update.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>