Rusty Russell [Mon, 22 Oct 2007 01:29:44 +0000 (11:29 +1000)]
Revert lguest magic and use hook in head.S
Version 2.07 of the boot protocol uses 0x23C for the hardware_subarch
field, that for lguest is "1". This allows us to use the standard
boot entry point rather than the "GenuineLguest" string hack.
The standard entry point also clears the BSS and copies the boot parameters
and commandline for us, saving more code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:24:24 +0000 (11:24 +1000)]
generalize lgread_u32/lgwrite_u32.
Jes complains that page table code still uses lgread_u32 even though
it now uses general kernel pte types. The best thing to do is to
generalize lgread_u32 and lgwrite_u32.
This means we lose the efficiency of getuser(). We could potentially
regain it if we used __copy_from_user instead of copy_from_user, but
I'm not certain that our range check is equivalent to access_ok() on
all platforms.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jes Sorensen <jes@sgi.com>
Rusty Russell [Mon, 22 Oct 2007 01:24:23 +0000 (11:24 +1000)]
Example launcher handle guests not being ready for input
We currently discard console and network input when the guest has no
input buffers. This patch changes that, so that we simply stop
listening to that fd until the guest refills its input buffers.
This is particularly important because hvc_console without interrupts
does backoff polling and so often lose characters if we discard.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:24:22 +0000 (11:24 +1000)]
Update example launcher for virtio
Implements virtio-based console, network and block servers. The block
server uses a thread so it's async, which is an improvement over the
old synchronous implementation (but a little more complex).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:24:21 +0000 (11:24 +1000)]
Lguest support for Virtio
This makes lguest able to use the virtio devices.
We change the device descriptor page from a simple array to a variable
length "type, config_len, status, config data..." format, and
implement virtio_config_ops to read from that config data.
We use the virtio ring implementation for an efficient Guest <-> Host
virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the
host when it changes.
We also use LHCALL_NOTIFY on kernel addresses for very very early
console output. We could have another hypercall, but this hack works
quite well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:03:40 +0000 (11:03 +1000)]
Virtio helper routines for a descriptor ringbuffer implementation
These helper routines supply most of the virtqueue_ops for hypervisors
which want to use a ring for virtio. Unlike the previous lguest
implementation:
1) The rings are variable sized (2^n-1 elements).
2) They have an unfortunate limit of 65535 bytes per sg element.
3) The page numbers are always 64 bit (PAE anyone?)
4) They no longer place used[] on a separate page, just a separate
cacheline.
5) We do a modulo on a variable. We could be tricky if we cared.
6) Interrupts and notifies are suppressed using flags within the rings.
Users need only get the ring pages and provide a notify hook (KVM
wants the guest to allocate the rings, lguest does it sanely).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dor Laor <dor.laor@qumranet.com>
Rusty Russell [Mon, 22 Oct 2007 01:03:39 +0000 (11:03 +1000)]
Virtio console driver
This is an hvc-based virtio console driver. It's suboptimal becuase
hvc expects to have raw access to interrupts and virtio doesn't assume
that, so it currently polls.
There are two solutions: expose hvc's "kick" interface, or wean off hvc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:03:38 +0000 (11:03 +1000)]
Block driver using virtio.
The block driver uses scatter-gather lists with sg[0] being the
request information (struct virtio_blk_outhdr) with the type, sector
and inbuf id. The next N sg entries are the bio itself, then the last
sg is the status byte. Whether the N entries are in or out depends on
whether it's a read or a write.
We accept the normal (SCSI) ioctls: they get handed through to the other
side which can then handle it or reply that it's unsupported. It's
not clear that this actually works in general, since I don't know
if blk_pc_request() requests have an accurate rq_data_dir().
Although we try to reply -ENOTTY on unsupported commands, ioctl(fd,
CDROMEJECT) returns success to userspace. This needs a separate
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <jens.axboe@oracle.com>
Rusty Russell [Mon, 22 Oct 2007 01:03:37 +0000 (11:03 +1000)]
Net driver using virtio
The network driver uses two virtqueues: one for input packets and one
for output packets. This has nice locking properties (ie. we don't do
any for recv vs send).
TODO:
1) Big packets.
2) Multi-client devices (maybe separate driver?).
3) Resolve freeing of old xmit skbs (Christian Borntraeger)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org
Rusty Russell [Mon, 22 Oct 2007 01:03:36 +0000 (11:03 +1000)]
Virtio interface
This attempts to implement a "virtual I/O" layer which should allow
common drivers to be efficiently used across most virtual I/O
mechanisms. It will no-doubt need further enhancement.
The virtio drivers add buffers to virtio queues; as the buffers are consumed
the driver "interrupt" callbacks are invoked.
There is also a generic implementation of config space which drivers can query
to get setup information from the host.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dor Laor <dor.laor@qumranet.com> Cc: Arnd Bergmann <arnd@arndb.de>
Rusty Russell [Mon, 22 Oct 2007 01:03:36 +0000 (11:03 +1000)]
Boot with virtual == physical to get closer to native Linux.
1) This allows us to get alot closer to booting bzImages.
2) It means we don't have to know page_offset.
3) The Guest needs to modify the boot pagetables to create the
PAGE_OFFSET mapping before jumping to C code.
4) guest_pa() walks the page tables rather than using page_offset.
5) We don't use page_offset to figure out whether to emulate: it was
always kinda quesationable, and won't work for instructions done
before remapping (bzImage unpacking in particular).
6) We still want the kernel address for tlb flushing: have the initial
hypercall give us that, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:03:35 +0000 (11:03 +1000)]
Allow guest to specify syscall vector to use.
(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch).
This patch allows Guests to specify what system call vector they want,
and we try to reserve it. We only allow one non-Linux system call
vector, to try to avoid DoS on the Host.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Jes Sorensen [Mon, 22 Oct 2007 01:03:31 +0000 (11:03 +1000)]
Make hypercalls arch-independent.
Clean up the hypercall code to make the code in hypercalls.c
architecture independent. First process the common hypercalls and
then call lguest_arch_do_hcall() if the call hasn't been handled.
Rename struct hcall_ring to hcall_args.
This patch requires the previous patch which reorganize the layout of
struct lguest_regs on i386 so they match the layout of struct
hcall_args.
Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:03:30 +0000 (11:03 +1000)]
Introduce "hcall" pointer to indicate pending hypercall.
Currently we look at the "trapnum" to see if the Guest wants a
hypercall. But once the hypercall is done we have to reset trapnum to
a bogus value, otherwise if we exit to userspace and return, we'd run
the same hypercall twice (that was a nasty bug to find!).
This has two main effects:
1) When Jes's patch changes the hypercall args to be a generic "struct
hcall_args" we simply change the type of "lg->hcall". It's set by
arch code, so if it has to copy args or something it can do so, and
point "hcall" into lg->arch somewhere.
2) Async hypercalls only get run when an actual hypercall is pending.
This simplfies the code a little and is a more logical semantic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Jes Sorensen [Mon, 22 Oct 2007 01:03:29 +0000 (11:03 +1000)]
Reorder guest saved regs to match hyperall order
Move eax next to ebx/ecx/edx in struct lguest_regs on i386, so they
will be located together and allow it to map directly to a struct
hcall_ring entry (which will be renamed struct hcall_args as in a
subsequent patch).
This is in preparation for making the code hcall code architecture
independent.
Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:03:26 +0000 (11:03 +1000)]
Introduce guest mem offset, static link example launcher
In order to avoid problematic special linking of the Launcher, we give
the Host an offset: this means we can use any memory region in the
Launcher as Guest memory rather than insisting on mmap() at 0.
The result is quite pleasing: a number of casts are replaced with
simple additions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 01:01:54 +0000 (11:01 +1000)]
Move lguest guest support to arch/x86.
Lguest has two sides: host support (to launch guests) and guest
support (replacement boot path and paravirt_ops). This moves the
guest side to arch/x86/lguest where it's closer to related code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de>
Tony Breeds [Mon, 22 Oct 2007 00:56:25 +0000 (10:56 +1000)]
Clocksource is continuous regardless of the state of the host's TSC.
Currently lguest will spend a lot of of time waking up the host, as it
cannot go tickless (if the [host] TSC has been marked unstable). On my
laptop I was getting ~40% of wakeups from lguest.
With this patch applied, my laptop is much happier!
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 00:56:23 +0000 (10:56 +1000)]
lguest.txt update
o Describe the new split configurations
o Highlight code documentation in drivers/lguest/README
o Point out necessity of having a getty on /dev/hvc0
o Remove gratuitous "m" in example
o Don't discuss I/O model here, stick to user documentation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These two callsites should really be errx instead of err, since there is
no errno associated with them in the moment they are issued.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Rusty Russell [Mon, 22 Oct 2007 00:56:19 +0000 (10:56 +1000)]
Make asm-x86/bootparam.h includable from userspace.
To actually write a bootloader (or, say, the lguest launcher)
currently requires duplication of these structures. Making them
includable from userspace is much nicer.
We merge the common userspace-required definitions of e820_32/64.h
into e820.h for export.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 22 Oct 2007 00:55:21 +0000 (10:55 +1000)]
Normalize config options for guest support
1) Group all the "guest OS" support options together, under a PARAVIRT_GUEST
menu.
2) Make those options select CONFIG_PARAVIRT, as suggested by Andi.
3) Make kconfig help titles consistent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Zach Amsden <zach@vmware.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Chris Wright <chrisw@sous-sol.org>
Randy Dunlap [Mon, 22 Oct 2007 04:00:10 +0000 (21:00 -0700)]
procfs: fix kernel-doc param warnings
Fix mnt_flush_task() misplaced kernel-doc.
Fix typos in some of the doc text.
Warning(linux-2.6.23-git17//fs/proc/base.c:2280): No description found for parameter 'mnt'
Warning(linux-2.6.23-git17//fs/proc/base.c:2280): No description found for parameter 'pid'
Warning(linux-2.6.23-git17//fs/proc/base.c:2280): No description found for parameter 'tgid'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Mon, 22 Oct 2007 03:59:53 +0000 (20:59 -0700)]
auditsc: fix kernel-doc param warnings
Fix kernel-doc for auditsc parameter changes.
Warning(linux-2.6.23-git17//kernel/auditsc.c:1623): No description found for parameter 'dentry'
Warning(linux-2.6.23-git17//kernel/auditsc.c:1666): No description found for parameter 'dentry'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Miller [Mon, 22 Oct 2007 09:09:00 +0000 (02:09 -0700)]
Expand hwif->host_flags so that it fits new flags.
Commit 238e4f142c33bb34440cc64029dde7b9fbc4e65f ("ide: add
IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags") caused a
regression because the host_flags in struct hwif_s wasn't expanded to
cope with the fact that the host flags no longer fit in 16 bits.
Signed-off-by: David S. Miller <davem@davemloft.net>
[ I hate having to add good commit descriptions. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 23 Oct 2007 02:29:05 +0000 (19:29 -0700)]
Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
Blackfin arch: use KBUILD_CFLAGS and KBUILD_AFLAGS in Makefile
Blackfin arch: Javier Herrer writes: fix building when icache and dcache is disabled
Linus Torvalds [Tue, 23 Oct 2007 02:24:17 +0000 (19:24 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: Use new smp_call_function_mask() in kvm_flush_remote_tlbs()
sched: don't clear PF_VCPU in scheduler
KVM: Improve local apic timer wraparound handling
KVM: Fix local apic timer divide by zero
KVM: Move kvm_guest_exit() after local_irq_enable()
KVM: x86 emulator: fix access registers for instructions with ModR/M byte and Mod = 3
KVM: VMX: Force vm86 mode if setting flags during real mode
KVM: x86 emulator: implement 'movnti mem, reg'
KVM: VMX: Reset mmu context when entering real mode
KVM: VMX: Handle NMIs before enabling interrupts and preemption
KVM: MMU: Set shadow pte atomically in mmu_pte_write_zap_pte()
KVM: x86 emulator: fix repne/repnz decoding
KVM: x86 emulator: fix merge screwup due to emulator split
Linus Torvalds [Tue, 23 Oct 2007 02:22:33 +0000 (19:22 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
[IPSEC] IPV6: Fix to add tunnel mode SA correctly.
[NET]: Cut off the queue_mapping field from sk_buff
[NET]: Hide the queue_mapping field inside netif_subqueue_stopped
[NET]: Make and use skb_get_queue_mapping
[NET]: Use the skb_set_queue_mapping where appropriate
[INET]: Use MODULE_ALIAS_NET_PF_PROTO_TYPE where possible.
[INET]: Let inet_diag and friends autoload
[NIU]: Cleanup PAGE_SIZE checks a bit
[NET]: Fix SKB_WITH_OVERHEAD calculation
[ATM]: Fix clip module reload crash.
[TG3]: Update version to 3.85
[TG3]: PCI command adjustment
[TG3]: Add management FW version to ethtool report
[TG3]: Add 5723 support
[Bluetooth] Convert RFCOMM to use kthread API
[Bluetooth] Add constant for Bluetooth socket options level
[Bluetooth] Add support for handling simple eSCO links
[Bluetooth] Add address and channel attribute to RFCOMM TTY device
[Bluetooth] Fix wrong argument in debug code of HIDP
[Bluetooth] Add generic driver for Bluetooth USB devices
...
Linus Torvalds [Tue, 23 Oct 2007 02:21:54 +0000 (19:21 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Enable restart support for lite5200 board
[POWERPC] Add restart support for mpc52xx based platforms
[POWERPC] Update device tree binding for mpc5200 gpt
[POWERPC] Add mpc52xx_find_and_map_path(), refactor utility functions
[POWERPC] bestcomm: Restrict bus prefetch bugfix to original mpc5200 silicon.
Linus Torvalds [Tue, 23 Oct 2007 02:21:08 +0000 (19:21 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] time: Make c0_compare_int_usable more bullet proof
[MIPS] Kbuild: Use the new cc-cross-prefix feature.
[MIPS] Fix include wrapper symbol to something sane.
[MIPS] Malta: Delete dead code.
[MIPS] time: Add GT641xx timer0 clockevent driver
[MIPS] time: SMP-proofing of Sibyte clockevent/clocksource code.
[MIPS] time: SMP/NUMA-proofing of IP27 HUB RT timer code.
[MIPS] time: Fix calculation in clockevent_set_clock()
Linus Torvalds [Tue, 23 Oct 2007 02:20:52 +0000 (19:20 -0700)]
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
apm_power: calculate to_full/to_empty time using energy
apm_power: improve battery finding algorithm
apm_power: fix obviously wrong logic for time reporting
Linus Torvalds [Tue, 23 Oct 2007 02:20:22 +0000 (19:20 -0700)]
Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (37 commits)
V4L/DVB (6382): saa7134: fix NULL dereference at suspend time for cards without IR receiver
V4L/DVB (6380): ivtvfb: Removal of the 'osd_compat' module option
V4L/DVB (6379): patch which improves GotView Saa7135 remote control
V4L/DVB (6378b): Updates info about the removal of V4L1 at feature-removal-schedule.txt
V4L/DVB (6378a): Removal of VIDIOC_[G|S]_MPEGCOMP from feature-removal-schedule.txt
V4L/DVB (6378): DiB0700-device: Using 1.10 firmware
V4L/DVB (6357): pvrusb2: Improve encoder chip health tracking
V4L/DVB (6356): "while (!ca->wakeup)" breaks the CAM initialisation
V4L/DVB (6352): ir-kbd-i2c: Missing break statement
V4L/DVB (6350): V4L: possible leak in em28xx_init_isoc
V4L/DVB (6348): ivtv: undo video mute when closing the radio
V4L/DVB (6347): ivtv: fix video mute when radio is used
V4L/DVB (6346): ivtvfb: YUV output size fix when ivtvfb is not loaded
V4L/DVB (6345): ivtvfb: YUV handling of an image which is not visible in the display area
V4L/DVB (6343): ivtvfb: check return value of unregister_framebuffer
V4L/DVB (6342): ivtv: fix circular locking (bug 9037)
V4L/DVB (6341): ivtv: fix resizing MPEG1 streams
V4L/DVB (6340): ivtvfb: screen mode change sometimes goes wrong
V4L/DVB (6339): ivtv: set the video color to black instead of green when capturing from the radio
V4L/DVB (6338): ivtv: fix incorrect EBUSY return
...
Grant Likely [Mon, 22 Oct 2007 22:38:32 +0000 (16:38 -0600)]
ppc: fix AT_VECTOR_SIZE on arch/ppc
Commit 4f9a58d75bfe82ab2b8ba5b8506dfb190a267834 ("increase
AT_VECTOR_SIZE to terminate saved_auxv properly") changes the size of
AT_VECTOR_SIZE from hard coded '44' to a calculation based on the value
of AT_VECTOR_SIZE_ARCH and AT_VECTOR_SIZE_BASE.
The change works for arch/powerpc, but it breaks arch/ppc because the
needed AT_VECTOR_SIZE_ARCH is not present in include/asm-ppc/system.h
and a default value of 0 is used instead. This results in
AT_VECTOR_SIZE being too small and it causes a kernel crash on loading
init.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
kbuild: cc-cross-prefix spelling
kbuild: allow depmod in cross builds again
kbuild: fix modules_install after a 'make vmlinux'
Gabriel C reported that modprobing appletalk on current git gives a
warning in dmesg :
"sysctl table check failed: /net/appletalk .3.7 procname does not match binary path procname"
Oops. My apologies it appears I made a mistake when creating my table
to check up on sysctl values.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Tested-by: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 23 Oct 2007 02:14:05 +0000 (19:14 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: fw-ohci: shut up a superfluous compiler warning
firewire: fw-ohci: log a note about unsupported features
Linus Torvalds [Tue, 23 Oct 2007 02:11:06 +0000 (19:11 -0700)]
Merge branch 'sg' of git://git.kernel.dk/linux-2.6-block
* 'sg' of git://git.kernel.dk/linux-2.6-block:
Add CONFIG_DEBUG_SG sg validation
Change table chaining layout
Update arch/ to use sg helpers
Update swiotlb to use sg helpers
Update net/ to use sg helpers
Update fs/ to use sg helpers
[SG] Update drivers to use sg helpers
[SG] Update crypto/ to sg helpers
[SG] Update block layer to use sg helpers
[SG] Add helpers for manipulating SG entries
Ralf Baechle [Mon, 22 Oct 2007 09:38:44 +0000 (10:38 +0100)]
[MIPS] time: SMP-proofing of Sibyte clockevent/clocksource code.
The BCM148 has 4 cores but there are also just 4 generic timers available
so use the ZBbus cycle counter instead of it. In addition the ZBbus
counter also offers a much higher resolution and 64-bit counting so I'm
considering a later complete conversion to it once I figure out if all
members of the Sibyte SOC family support it - the docs seem to agree but
the headers files seem to disagree ...
Jens Axboe [Mon, 22 Oct 2007 17:57:20 +0000 (19:57 +0200)]
Change table chaining layout
Change the page member of the scatterlist structure to be an unsigned
long, and encode more stuff in the lower bits:
- Bits 0 and 1 zero: this is a normal sg entry. Next sg entry is located
at sg + 1.
- Bit 0 set: this is a chain entry, the next real entry is at ->page_link
with the two low bits masked off.
- Bit 1 set: this is the final entry in the sg entry. sg_next() will return
NULL when passed such an entry.
It's thus important that sg table users use the proper accessors to get
and set the page member.
Sam Ravnborg [Mon, 22 Oct 2007 09:23:07 +0000 (11:23 +0200)]
kbuild: fix modules_install after a 'make vmlinux'
make vmlinux would delete the content of $(MODVERDIR)
equals .tmp_versions. This caused a subsequent
make modules_install to fail.
Fix it so we clean the directory only for the
modules build - but we still unconditionally create it so
we can do:
make dir/file.ko
without a preceeding make modules.
Reported by David Miller <davem@davemloft.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: David Miller <davem@davemloft.net>
Stefan Richter [Sun, 21 Oct 2007 09:20:07 +0000 (11:20 +0200)]
firewire: fw-ohci: shut up a superfluous compiler warning
New warning since commit ab88ca488b8af66c3defa165874e81e695319a19,
"firewire: fw-ohci: missing dma_unmap_single":
drivers/firewire/fw-ohci.c: In function 'at_context_transmit':
drivers/firewire/fw-ohci.c:609: warning: 'payload_bus' may be used
uninitialized in this function
Access to payload_bus is conditional on packet->payload_length > 0,
and that won't change while in at_context_queue_packet.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Update documentation to the current state of affairs. Remove duplicated
method descruptions in exportfs.h and point to Documentation/filesystems/
Exporting instead. Add a little file header comment in expfs.c describing
what's going on and mentioning Neils and my copyright [1].
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OCFS2 has it's own 64bit-firendly filehandle format so we can't use the
generic helpers here. I'll add a struct for the types later.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert gfs2 to the new ops. Uses a similar structure to the generic helpers,
but gfs2 has it's own file handle formats.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Another nice little cleanup by using the new methods.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm not sure what people were thinking when adding support to export tmpfs,
but here's the conversion anyway:
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nice little cleanup by consolidating things a little and using a structure for
the special file handle format.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Very little changes here, fat had a mostly no op decode_fh before and does not
store any parent information.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This one is a lot more complicated than the previous ones. XFS already had a
very clever scheme for supporting 64bit inode numbers in filehandles, and I've
reworked this to be some kind of a prototype for the generic 64bit inode
filehandle support.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log