]> err.no Git - linux-2.6/log
linux-2.6
16 years agoFAT_VALID_MEDIA(): remove pointless test
Andrew Morton [Mon, 28 Apr 2008 09:16:30 +0000 (02:16 -0700)]
FAT_VALID_MEDIA(): remove pointless test

The on-disk media specification field in FAT is only 8-bits, so testing for
<=0xff is pointless, and can generate a "comparison is always true due to
limited range of data type" warning.

While we're there, convert FAT_VALID_MEDIA() into a C function - the present
implementation is buggy: it generates either one or two references to its
argument.

Cc: Frank Seidel <fseidel@suse.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: use __getname()
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:29 +0000 (02:16 -0700)]
fat: use __getname()

__getname() is faster than __get_free_page(). Use it.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovfat: bug fix for vfat cannot handle filename with 255
Keith Mok [Mon, 28 Apr 2008 09:16:29 +0000 (02:16 -0700)]
vfat: bug fix for vfat cannot handle filename with 255

This patch fix the problem that the buffer allocated for convert of unicode to
utf8 in fat/dir.c is too small.

And cannot handle filename with 255 asian characters when mounted with utf8
options.

Also it fix the filename length limitation checking in vfat/namei.c that the
filename length should be checked against the number of converted unicode
characters.

Not the length before NLS/UTF8 converted.

Signed-off-by: Keith Mok <ek9852@gmail.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoAdd balance_dirty_pages_ratelimited() to cont_expand_zero()
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:28 +0000 (02:16 -0700)]
Add balance_dirty_pages_ratelimited() to cont_expand_zero()

On the systems, ftruncate() which expand size for FAT became the cause
of OOM.  The cont_expand_zero() filled all memory with dirty pages,
and since disk is very slow, limit of page scanning was exceeded, then
it triggered OOM.

This adds balance_dirty_pages_ratelimited() to avoid filling memory
with dirty pages.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: Remove fat_clusters_flush()
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:27 +0000 (02:16 -0700)]
fat: Remove fat_clusters_flush()

This removes unneeded fat_clusters_flush().

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: Update free_clusters even if it is untrusted
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:27 +0000 (02:16 -0700)]
fat: Update free_clusters even if it is untrusted

Currently, free_clusters is not updated until it is trusted, because
Windows doesn't update it correctly.

But if user is using FAT driver of Linux, it updates free_clusters
correctly.  Instead, this updates it even if it's untrusted, so if
free_clustes is correct, now keep correct value.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: Add allow_utime option
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:26 +0000 (02:16 -0700)]
fat: Add allow_utime option

Normally utime(2) checks current process is owner of the file, or it
has CAP_FOWNER capability.  But FAT filesystem doesn't have uid/gid as
on disk info, so normal check is too unflexible.

With this option you can relax it.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: fat_setattr() fix
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:26 +0000 (02:16 -0700)]
fat: fat_setattr() fix

Fix fat_setattr() on the case of showexec option. If user specified
showexec option, inode->i_mode may not have S_IXUGO. This just use
inode->i_mode to fix it.

And with this patch, we don't allow chmod() on memory inode, it's just
bad behaviour. IOW, we allow changing S_IWUGO only which can be stored
to disk.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: fat_notify_change() and check_mode() cleanup
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:25 +0000 (02:16 -0700)]
fat: fat_notify_change() and check_mode() cleanup

- Rename fat_notify_change() to fat_setattr()
- check_mode() cleanup
- Change layout of code

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: kill is_bad_inode() check
OGAWA Hirofumi [Mon, 28 Apr 2008 09:16:24 +0000 (02:16 -0700)]
fat: kill is_bad_inode() check

FAT doesn't need to check bad inode anymore.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: unpack tails on quota files
Jan Kara [Mon, 28 Apr 2008 09:16:23 +0000 (02:16 -0700)]
reiserfs: unpack tails on quota files

Quota files cannot have tails because quota_write and quota_read functions do
not support them.  So far when quota files did have tail, we just refused to
turn quotas on it.  Sadly this check has been wrong and so there are now
plenty installations where quota files don't have NOTAIL flag set and so now
after fixing the check, they suddently fail to turn quotas on.  Since it's
easy to unpack the tail from kernel, do this from reiserfs_quota_on() which
solves the problem and is generally nicer to users anyway.

Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: <urhausen@urifabi.net>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: fix hang on umount with quotas when journal is aborted
Jan Kara [Mon, 28 Apr 2008 09:16:23 +0000 (02:16 -0700)]
reiserfs: fix hang on umount with quotas when journal is aborted

Call dquot_drop() from reiserfs_dquot_drop() even if we fail to start a
transaction.  Otherwise we never get to dropping references to quota
structures from the inode and umount will hang indefinitely.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:16:22 +0000 (02:16 -0700)]
reiserfs: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: fix more sparse warnings in do_balan.c
Harvey Harrison [Mon, 28 Apr 2008 09:16:21 +0000 (02:16 -0700)]
reiserfs: fix more sparse warnings in do_balan.c

fs/reiserfs/do_balan.c:1467:10: warning: symbol 'ret_val' shadows an earlier one
fs/reiserfs/do_balan.c:275:6: originally declared here
fs/reiserfs/do_balan.c:1471:23: warning: symbol 'ih' shadows an earlier one
fs/reiserfs/do_balan.c:249:67: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: fix sparse warning in journal.c
Harvey Harrison [Mon, 28 Apr 2008 09:16:21 +0000 (02:16 -0700)]
reiserfs: fix sparse warning in journal.c

fs/reiserfs/journal.c:4319:2: warning: returning void-valued expression

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: le*_add_cpu conversion
Marcin Slusarz [Mon, 28 Apr 2008 09:16:20 +0000 (02:16 -0700)]
reiserfs: le*_add_cpu conversion

replace all:
little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
expression_in_cpu_byteorder);
with:
leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoudf: fix sparse warning in namei.c
Harvey Harrison [Mon, 28 Apr 2008 09:16:19 +0000 (02:16 -0700)]
udf: fix sparse warning in namei.c

Let's use bsize instead.
fs/udf/namei.c:960:12: warning: symbol 'elen' shadows an earlier one
fs/udf/namei.c:937:15: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoufs: replace __inline with inline
Harvey Harrison [Mon, 28 Apr 2008 09:16:18 +0000 (02:16 -0700)]
ufs: replace __inline with inline

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoufs: remove unused fs64_add and fs64_sub
Marcin Slusarz [Mon, 28 Apr 2008 09:16:18 +0000 (02:16 -0700)]
ufs: remove unused fs64_add and fs64_sub

remove fs64_add and fs64_sub - they probably weren't ever used because
their prototypes used u32 instead of __fs64

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoufs: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:16:17 +0000 (02:16 -0700)]
ufs: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoufs: [bl]e*_add_cpu conversion
Marcin Slusarz [Mon, 28 Apr 2008 09:16:16 +0000 (02:16 -0700)]
ufs: [bl]e*_add_cpu conversion

replace all:
big/little_endian_variable = cpu_to_[bl]eX([bl]eX_to_cpu(big/little_endian_variable) +
expression_in_cpu_byteorder);
with:
[bl]eX_add_cpu(&big/little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:16:16 +0000 (02:16 -0700)]
jbd: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:16:15 +0000 (02:16 -0700)]
ext3: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: fix mount messages when quota disabled
Jan Kara [Mon, 28 Apr 2008 09:16:14 +0000 (02:16 -0700)]
ext3: fix mount messages when quota disabled

When quota is disabled, we should not print 'journaled quota not supported'
when user tried to mount non-journaled quota.  Also fix typo in the message.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: retry block allocation if new blocks are allocated from system zone
Aneesh Kumar K.V [Mon, 28 Apr 2008 09:16:14 +0000 (02:16 -0700)]
ext3: retry block allocation if new blocks are allocated from system zone

If the block allocator gets blocks out of system zone ext3 calls ext3_error.
But if the file system is mounted with errors=continue retry block allocation.
 We need to mark the system zone blocks as in use to make sure retry don't
pick them again

System zone is the block range mapping block bitmap, inode bitmap and inode
table.

[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: fix hang on umount with quotas when journal is aborted
Jan Kara [Mon, 28 Apr 2008 09:16:13 +0000 (02:16 -0700)]
ext3: fix hang on umount with quotas when journal is aborted

Call dquot_drop() from ext3_dquot_drop() even if we fail to start a
transaction.  Otherwise we never get to dropping references to quota
structures from the inode and umount will hang indefinitely.  Thanks to
Payphone LIOU for spotting the problem.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Payphone LIOU <lioupayphone@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: fix update of mtime and ctime on rename
Jan Kara [Mon, 28 Apr 2008 09:16:12 +0000 (02:16 -0700)]
ext3: fix update of mtime and ctime on rename

Make ext3 update mtime and ctime of the directory into which we move file even
if the directory entry already exists.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: fix possible journal overflow issues
Josef Bacik [Mon, 28 Apr 2008 09:16:12 +0000 (02:16 -0700)]
jbd: fix possible journal overflow issues

There are several cases where the running transaction can get buffers added to
its BJ_Metadata list which it never dirtied, which makes its t_nr_buffers
counter end up larger than its t_outstanding_credits counter.

This will cause issues when starting new transactions as while we are logging
buffers we decrement t_outstanding_buffers, so when t_outstanding_buffers goes
negative, we will report that we need less space in the journal than we
actually need, so transactions will be started even though there may not be
enough room for them.  In the worst case scenario (which admittedly is almost
impossible to reproduce) this will result in the journal running out of space.

The fix is to only
refile buffers from the committing transaction to the running transactions
BJ_Modified list when b_modified is set on that journal, which is the only way
to be sure if the running transaction has modified that buffer.

This patch also fixes an accounting error in journal_forget, it is possible
that we can call journal_forget on a buffer without having modified it, only
gotten write access to it, so instead of freeing a credit, we only do so if
the buffer was modified.  The assert will help catch if this problem occurs.
Without these two patches I could hit this assert within minutes of running
postmark, with them this issue no longer arises.  Thank you,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: fix the way the b_modified flag is cleared
Josef Bacik [Mon, 28 Apr 2008 09:16:10 +0000 (02:16 -0700)]
jbd: fix the way the b_modified flag is cleared

Currently at the start of a journal commit we loop through all of the buffers
on the committing transaction and clear the b_modified flag (the flag that is
set when a transaction modifies the buffer) under the j_list_lock.

The problem is that everywhere else this flag is modified only under the jbd
lock buffer flag, so it will race with a running transaction who could
potentially set it, and have it unset by the committing transaction.

This is also a big waste, you can have several thousands of buffers that you
are clearing the modified flag on when you may not need to.  This patch
removes this code and instead clears the b_modified flag upon entering
do_get_write_access/journal_get_create_access, so if that transaction does
indeed use the buffer then it will be accounted for properly, and if it does
not then we know we didn't use it.

That will be important for the next patch in this series.  Tested thoroughly
by myself using postmark/iozone/bonnie++.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofs/ext3: use BUG_ON
Julia Lawall [Mon, 28 Apr 2008 09:16:09 +0000 (02:16 -0700)]
fs/ext3: use BUG_ON

if (...) BUG(); should be replaced with BUG_ON(...) when the test has no
side-effects to allow a definition of BUG_ON that drops the code completely.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ disable unlikely @ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (unlikely(E)) { BUG(); }
+ BUG_ON(E);
)

@@ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (E) { BUG(); }
+ BUG_ON(E);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: check ext3_journal_get_write_access() errors
Akinobu Mita [Mon, 28 Apr 2008 09:16:08 +0000 (02:16 -0700)]
ext3: check ext3_journal_get_write_access() errors

Check ext3_journal_get_write_access() errors.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: use ext3_get_group_desc()
Akinobu Mita [Mon, 28 Apr 2008 09:16:08 +0000 (02:16 -0700)]
ext3: use ext3_get_group_desc()

Use ext3_get_group_desc()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: add missing ext3_journal_stop()
Akinobu Mita [Mon, 28 Apr 2008 09:16:07 +0000 (02:16 -0700)]
ext3: add missing ext3_journal_stop()

Add missing ext3_journal_stop() in error handling.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: use ext3_group_first_block_no()
Akinobu Mita [Mon, 28 Apr 2008 09:16:07 +0000 (02:16 -0700)]
ext3: use ext3_group_first_block_no()

Use ext3_group_first_block_no()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomake ext3_xattr_list() static
Adrian Bunk [Mon, 28 Apr 2008 09:16:06 +0000 (02:16 -0700)]
make ext3_xattr_list() static

Make the needlessly global ext3_xattr_list() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: convert byte order of constant instead of variable
Marcin Slusarz [Mon, 28 Apr 2008 09:16:06 +0000 (02:16 -0700)]
ext3: convert byte order of constant instead of variable

Convert byte order of constant instead of variable which can be done at
compile time (vs run time).

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: fdatasync should skip metadata writeout when overwriting
Hisashi Hifumi [Mon, 28 Apr 2008 09:16:05 +0000 (02:16 -0700)]
ext3: fdatasync should skip metadata writeout when overwriting

Currently fdatasync is identical to fsync in ext3.

I think fdatasync should skip journal flush in data=ordered and
data=writeback mode when it overwrites to already-instantiated blocks on
HDD.  When I_DIRTY_DATASYNC flag is not set, fdatasync should skip journal
writeout because this indicates only atime or/and mtime updates.

Following patch is the same approach of ext2's fsync code(ext2_sync_file).

I did a performance test using the sysbench.

#sysbench --num-threads=128 --max-requests=50000 --test=fileio --file-total-size=128G
--file-test-mode=rndwr --file-fsync-mode=fdatasync run

The result on ext3 was:

-2.6.24
Operations performed:  0 Read, 50080 Write, 59600 Other = 109680 Total
Read 0b  Written 782.5Mb  Total transferred 782.5Mb  (12.116Mb/sec)
  775.45 Requests/sec executed

Test execution summary:
    total time:                          64.5814s
    total number of events:              50080
    total time taken by event execution: 3713.9836
    per-request statistics:
         min:                            0.0000s
         avg:                            0.0742s
         max:                            0.9375s
         approx.  95 percentile:         0.2901s

Threads fairness:
    events (avg/stddev):           391.2500/23.26
    execution time (avg/stddev):   29.0155/1.99

-2.6.24-patched
Operations performed:  0 Read, 50009 Write, 61596 Other = 111605 Total
Read 0b  Written 781.39Mb  Total transferred 781.39Mb  (16.419Mb/sec)
1050.83 Requests/sec executed

Test execution summary:
    total time:                          47.5900s
    total number of events:              50009
    total time taken by event execution: 2934.5768
    per-request statistics:
           min:                            0.0000s
         avg:                            0.0587s
           max:                            0.8938s
         approx.  95 percentile:         0.1993s

Threads fairness:
    events (avg/stddev):           390.6953/22.64
    execution time (avg/stddev):   22.9264/1.17

Filesystem I/O throughput was improved.

Signed-off-by :Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: retry block allocation if new blocks are allocated from system zone
Aneesh Kumar K.V [Mon, 28 Apr 2008 09:16:04 +0000 (02:16 -0700)]
ext2: retry block allocation if new blocks are allocated from system zone

If the block allocator gets blocks out of system zone ext2 calls ext2_error.
But if the file system is mounted with errors=continue retry block allocation.
 We need to mark the system zone blocks as in use to make sure retry don't
pick them again

System zone is the block range mapping block bitmap, inode bitmap and inode
table.

[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:16:03 +0000 (02:16 -0700)]
ext2: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofs/ext2: use BUG_ON
Julia Lawall [Mon, 28 Apr 2008 09:16:02 +0000 (02:16 -0700)]
fs/ext2: use BUG_ON

if (...) BUG(); should be replaced with BUG_ON(...) when the test has no
side-effects to allow a definition of BUG_ON that drops the code completely.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ disable unlikely @ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (unlikely(E)) { BUG(); }
+ BUG_ON(E);
)

@@ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (E) { BUG(); }
+ BUG_ON(E);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: use ext2_fsblk_t type
Akinobu Mita [Mon, 28 Apr 2008 09:16:02 +0000 (02:16 -0700)]
ext2: use ext2_fsblk_t type

Use ext2_fsblk_t type for filesystem-wide blocks number

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: use ext2_group_first_block_no()
Akinobu Mita [Mon, 28 Apr 2008 09:16:01 +0000 (02:16 -0700)]
ext2: use ext2_group_first_block_no()

Use ext2_group_first_block_no() and assign the return values to
ext2_fsblk_t variables.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: improve ext2_readdir() return value
Akinobu Mita [Mon, 28 Apr 2008 09:16:00 +0000 (02:16 -0700)]
ext2: improve ext2_readdir() return value

Improve ext2_readdir() return value for ext2_get_page() failure by using the
actual result of ext2_get_page().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: convert byte order of constant instead of variable
Marcin Slusarz [Mon, 28 Apr 2008 09:16:00 +0000 (02:16 -0700)]
ext2: convert byte order of constant instead of variable

Convert byte order of constant instead of variable which can be done at
compile time (vs run time).

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: le*_add_cpu conversion
Marcin Slusarz [Mon, 28 Apr 2008 09:15:59 +0000 (02:15 -0700)]
ext2: le*_add_cpu conversion

replace all:
little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
expression_in_cpu_byteorder);
with:
leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoPNP: use dev_printk for quirk messages
Bjorn Helgaas [Mon, 28 Apr 2008 09:15:59 +0000 (02:15 -0700)]
PNP: use dev_printk for quirk messages

Convert quirk printks to dev_printk().

[akpm@linux-foundation.org: fix warnings, improve output text]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoPNP: simplify quirk debug output
Bjorn Helgaas [Mon, 28 Apr 2008 09:15:58 +0000 (02:15 -0700)]
PNP: simplify quirk debug output

print_fn_descriptor_symbol() prints the address if we don't have a symbol,
so no need to print both.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoPNP: skip dev->protocol NULL checks
Bjorn Helgaas [Mon, 28 Apr 2008 09:15:57 +0000 (02:15 -0700)]
PNP: skip dev->protocol NULL checks

Every PNP device should have a valid protocol pointer.  If it doesn't,
something's wrong and we should oops so we can find and fix the problem.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/md: use time_before, time_before_eq, etc
Julia Lawall [Mon, 28 Apr 2008 09:15:56 +0000 (02:15 -0700)]
drivers/md: use time_before, time_before_eq, etc

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoraid: remove leading TAB on printk messages
Nick Andrew [Mon, 28 Apr 2008 09:15:55 +0000 (02:15 -0700)]
raid: remove leading TAB on printk messages

MD drivers use one printk() call to print 2 log messages and the second line
may be prefixed by a TAB character.  It may also output a trailing space
before newline.  klogd (I think) turns the TAB character into the 2 characters
'^I' when logging to a file.  This looks ugly.

Instead of a leading TAB to indicate continuation, prefix both output lines
with 'raid:' or similar.  Also remove any trailing space in the vicinity of
the affected code and consistently end the sentences with a period.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomd: raid5.c convert simple_strtoul to strict_strtoul
Dan Williams [Mon, 28 Apr 2008 09:15:54 +0000 (02:15 -0700)]
md: raid5.c convert simple_strtoul to strict_strtoul

strict_strtoul handles the open-coded sanity checks in
raid5_store_stripe_cache_size and raid5_store_preread_threshold

Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomd: introduce get_priority_stripe() to improve raid456 write performance
Dan Williams [Mon, 28 Apr 2008 09:15:53 +0000 (02:15 -0700)]
md: introduce get_priority_stripe() to improve raid456 write performance

Improve write performance by preventing the delayed_list from dumping all its
stripes onto the handle_list in one shot.  Delayed stripes are now further
delayed by being held on the 'hold_list'.  The 'hold_list' is bypassed when:

  * a STRIPE_IO_STARTED stripe is found at the head of 'handle_list'
  * 'handle_list' is empty and i/o is being done to satisfy full stripe-width
    write requests
  * 'bypass_count' is less than 'bypass_threshold'.  By default the threshold
    is 1, i.e. every other stripe handled is a preread stripe provided the
    top two conditions are false.

Benchmark data:
System: 2x Xeon 5150, 4x SATA, mem=1GB
Baseline: 2.6.24-rc7
Configuration: mdadm --create /dev/md0 /dev/sd[b-e] -n 4 -l 5 --assume-clean
Test1: dd if=/dev/zero of=/dev/md0 bs=1024k count=2048
  * patched:  +33% (stripe_cache_size = 256), +25% (stripe_cache_size = 512)

Test2: tiobench --size 2048 --numruns 5 --block 4096 --block 131072 (XFS)
  * patched: +13%
  * patched + preread_bypass_threshold = 0: +37%

Changes since v1:
* reduce bypass_threshold from (chunk_size / sectors_per_chunk) to (1) and
  make it configurable.  This defaults to fairness and modest performance
  gains out of the box.
Changes since v2:
* [neilb@suse.de]: kill STRIPE_PRIO_HI and preread_needed as they are not
  necessary, the important change was clearing STRIPE_DELAYED in
  add_stripe_bio and this has been moved out to make_request for the hang
  fix.
* [neilb@suse.de]: simplify get_priority_stripe
* [dan.j.williams@intel.com]: reset the bypass_count when ->hold_list is
  sampled empty (+11%)
* [dan.j.williams@intel.com]: decrement the bypass_count at the detection
  of stripes being naturally promoted off of hold_list +2%.  Note, resetting
  bypass_count instead of decrementing on these events yields +4% but that is
  probably too aggressive.
Changes since v3:
* cosmetic fixups

Tested-by: James W. Laferriere <babydr@baby-dragons.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomd: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:15:50 +0000 (02:15 -0700)]
md: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomd: fix integer as NULL pointer warnings in md.c
Harvey Harrison [Mon, 28 Apr 2008 09:15:49 +0000 (02:15 -0700)]
md: fix integer as NULL pointer warnings in md.c

drivers/md/md.c:734:16: warning: Using plain integer as NULL pointer
drivers/md/md.c:1115:16: warning: Using plain integer as NULL pointer

Add some braces to match the else-block as well.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovideo: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Mon, 28 Apr 2008 09:15:47 +0000 (02:15 -0700)]
video: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBF54x Framebuffer Driver: BF542 does not have EPPI0, so dont allow the LQ034 driver...
Mike Frysinger [Mon, 28 Apr 2008 09:15:47 +0000 (02:15 -0700)]
BF54x Framebuffer Driver: BF542 does not have EPPI0, so dont allow the LQ034 driver for now

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBF54x Framebuffer Driver: drop request_irq cast
Mike Frysinger [Mon, 28 Apr 2008 09:15:46 +0000 (02:15 -0700)]
BF54x Framebuffer Driver: drop request_irq cast

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/video/w100fb.c: avoid a couple of error-path NULL derefs
Andrew Morton [Mon, 28 Apr 2008 09:15:45 +0000 (02:15 -0700)]
drivers/video/w100fb.c: avoid a couple of error-path NULL derefs

Fix a couple of error-patch oopses identified by Marcio Buss in
http://bugzilla.kernel.org/show_bug.cgi?id=9567.

Cc: Marcio Buss <marciobuss@gmail.com>
Cc: Jeff Zhou <xinzhou.sjtu@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: intelfb: add support for the Intel Integrated Graphics Controller 965G/965GM
Maik Broemme [Mon, 28 Apr 2008 09:15:43 +0000 (02:15 -0700)]
fbdev: intelfb: add support for the Intel Integrated Graphics Controller 965G/965GM

Add support for the 965G and 965GM graphic chipsets to the intelfb driver.  I
have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics
Controller and with the attached patch the framebuffer comes up.  I have
tested it a bit with DirectFB to make sure it is working stable.

I also have an Intel Mobile GM945 and I compared the results, the programming
interface of the 9xx series from Intel is mostly the same, so I think the
patch should add all the functionality which the 945GM has.

Signed-off-by: Maik Broemme <mbroemme@plusserver.de>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofb: convert /proc/fb to seq_file interface
Alexey Dobriyan [Mon, 28 Apr 2008 09:15:42 +0000 (02:15 -0700)]
fb: convert /proc/fb to seq_file interface

Note: looks like accesses to "registered_fb" are done without any exclusion
so there're none in new proc code, too. This should be fixed in separate
patch.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/video/uvesafb.c: fix error-path memory leak
Andrew Morton [Mon, 28 Apr 2008 09:15:41 +0000 (02:15 -0700)]
drivers/video/uvesafb.c: fix error-path memory leak

Fix bug identified by Daniel Marjamki: `m' is leaked on the error path.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10452

Cc: Daniel Marjamki <danielm77@spray.se>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: platforming hecubafb and n411
Jaya Kumar [Mon, 28 Apr 2008 09:15:40 +0000 (02:15 -0700)]
fbdev: platforming hecubafb and n411

This patch splits hecubafb into the platform independent hecubafb and the
platform dependent n411.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agometronomefb: don't free firmware twice in error path
Sebastian Siewior [Mon, 28 Apr 2008 09:15:39 +0000 (02:15 -0700)]
metronomefb: don't free firmware twice in error path

Right now, if request_irq or anthing after it fails than we free the firmware
for the second time what might end bad :)

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: platforming metronomefb and am200epd
Jaya Kumar [Mon, 28 Apr 2008 09:15:38 +0000 (02:15 -0700)]
fbdev: platforming metronomefb and am200epd

This patch splits metronomefb into the platform independent metronomefb and
the platform dependent am200epd.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: hecubafb bugfix
Jaya Kumar [Mon, 28 Apr 2008 09:15:37 +0000 (02:15 -0700)]
fbdev: hecubafb bugfix

This patch is a bugfix for hecubafb_write which would return an incorrect
error value for the bytecount from framebuffer writes.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: metronomefb bugfix
Jaya Kumar [Mon, 28 Apr 2008 09:15:36 +0000 (02:15 -0700)]
fbdev: metronomefb bugfix

This patch is a bugfix for the use of cfb_* functions instead of sys_*
functions.  sys_* should be used with vmalloced framebuffers.  the previous
cfb_ use would not work for callers of imageblit/etc.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopowerpc: Add DIU platform code for MPC8610HPCD
York Sun [Mon, 28 Apr 2008 09:15:36 +0000 (02:15 -0700)]
powerpc: Add DIU platform code for MPC8610HPCD

Add platform code to support Freescale DIU.  The platform code includes
framebuffer memory allocation, pixel format, monitor port, etc.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: powerpc: driver for Freescale 8610 and 5121 DIU
York Sun [Mon, 28 Apr 2008 09:15:34 +0000 (02:15 -0700)]
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU

The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs

All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0.  Changing pixel clock has no effect
on other fbs.

Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0

required command line parameters to preallocate memory for frame buffer diufb.

optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:

Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60

Bpp
bpp=32, bpp=24, or bpp=16

Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS

Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.

If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: nv: fix sparse noise
Alexey Dobriyan [Mon, 28 Apr 2008 09:15:33 +0000 (02:15 -0700)]
fbdev: nv: fix sparse noise

Mostly signedness fixes.  nv10_sim_state existence in both drivers suggests
that one of them should be removed, but that's for later.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: nv: drop useless CONFIG_PCI checks
Alexey Dobriyan [Mon, 28 Apr 2008 09:15:33 +0000 (02:15 -0700)]
fbdev: nv: drop useless CONFIG_PCI checks

Both FB_RIVA and FB_NVIDIA depends on PCI, so CONFIG_PCI always defined for
them.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: nv: drop useless MODULE ifdefs
Alexey Dobriyan [Mon, 28 Apr 2008 09:15:32 +0000 (02:15 -0700)]
fbdev: nv: drop useless MODULE ifdefs

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoOLPC: gxfb/lxfb: add DCON panel modes to framebuffer drivers
Andres Salomon [Mon, 28 Apr 2008 09:15:31 +0000 (02:15 -0700)]
OLPC: gxfb/lxfb: add DCON panel modes to framebuffer drivers

Since there's no way to autodetect panel modes, we're forced to hardcode them
in the driver and add a big fat #ifdef.  The OLPC DCON needs a specific mode
line (at 1200x900).  This adds it to both gxfb and lxfb.

(Jordan said: We could probably detect the panel mode, but there isn't any
reason to since the panel timings are well known and won't change.  While OFW
detection would be good computer science fu, it would be a wasted effort since
its so easy to hard code them into the table.)

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogxfb/lxfb: detect framebuffer size using an MSR if VSA2 isn't available
Andres Salomon [Mon, 28 Apr 2008 09:15:30 +0000 (02:15 -0700)]
gxfb/lxfb: detect framebuffer size using an MSR if VSA2 isn't available

If there's no VSA2 (ie, if we're using tinybios or OpenFirmware), use the
GLIU's P2D Range Offset Descriptor to determine how much memory we have
available for the framebuffer.

Originally based on a patch by Jordan Crouse.  Tested with OpenFirmware;
Pascal informs me that tinybios has a stub that fills in P2D_RO0.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogxfb/lxfb: use VSA definitions when fetching framebuffer size
Andres Salomon [Mon, 28 Apr 2008 09:15:30 +0000 (02:15 -0700)]
gxfb/lxfb: use VSA definitions when fetching framebuffer size

..Rather than using magic constants.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb/gxfb: when blanking with FB_BLANK_POWERDOWN, also turn off the CRT
Andres Salomon [Mon, 28 Apr 2008 09:15:29 +0000 (02:15 -0700)]
lxfb/gxfb: when blanking with FB_BLANK_POWERDOWN, also turn off the CRT

The Display Control's CRT_EN can be shut off when we enter FB_BLANK_POWERDOWN
in an attempt to save additional power.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: disable suspend VT switch by default
Andres Salomon [Mon, 28 Apr 2008 09:15:28 +0000 (02:15 -0700)]
lxfb: disable suspend VT switch by default

By default disable VT switch, but allow it to be overridden via the
'vt_switch' module arg.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: rename kernel arg fbsize to vram
Andres Salomon [Mon, 28 Apr 2008 09:15:27 +0000 (02:15 -0700)]
lxfb: rename kernel arg fbsize to vram

Match other fb drivers (including gxfb).  Also, document the current boot
arguments in Documentation/fb/lxfb.txt.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: add power management functionality
Andres Salomon [Mon, 28 Apr 2008 09:15:27 +0000 (02:15 -0700)]
lxfb: add power management functionality

This adds the ability to suspend/resume the lxfb driver, which includes:
  - Register and palette saving code; registers are stored in lxfb_par.
    A few MSR values are saved as well.
  - lx_powerup and lx_powerdown functions which restore/save registers and
    enable/disable graphic engines.
  - lxfb_suspend/lxfb_resume

Originally based on a patch by Jordan Crouse.

[akpm@linux-foundation.org: be conventional, save an ifdef]
Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: rearrange/rename MSR bitfields
Andres Salomon [Mon, 28 Apr 2008 09:15:26 +0000 (02:15 -0700)]
lxfb: rearrange/rename MSR bitfields

Finally, move the MSR bitfields around in lxfb.h, and rename them.  Alas, most
of that crap appears to be undocumented.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: clean up final bits of df_regs
Andres Salomon [Mon, 28 Apr 2008 09:15:25 +0000 (02:15 -0700)]
lxfb: clean up final bits of df_regs

Finally drop the last remnants of df_regs, using vp_regs instead.  Also, drop
panel_width and panel_height from lxfb_par; they're unused.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: clean up register definitions
Andres Salomon [Mon, 28 Apr 2008 09:15:24 +0000 (02:15 -0700)]
lxfb: clean up register definitions

 - Rename various bitfield defines to match the data sheet names.
 - Rename DF_ register definitions to VP_ to match the data sheet;
   ie, DF_PAR -> VP_PAR.
 - for GP/DC registers, rather than defining to specific addresses, use
   an enum to number them sequentially and just multiply by 4 (bytes) to
   access them (in read_*/write_* functions).
 - for VP/FP registers, use an enum and multiple by 8 (bytes).  They're
   64bit registers.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: create GP/DC/VP/FP-specific handlers rather than using readl/writel
Andres Salomon [Mon, 28 Apr 2008 09:15:24 +0000 (02:15 -0700)]
lxfb: create GP/DC/VP/FP-specific handlers rather than using readl/writel

This creates read_gp/write_gp, read_dc/write_dc, read_vp/write_vp, and
read_fp/write_fp for reading and updating those registers.  Note that we don't
follow the 'DF' naming; those will be renamed to VP shortly.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolxfb: extend PLL table to support dotclocks below 25 MHz
Jens Rottmann [Mon, 28 Apr 2008 09:15:22 +0000 (02:15 -0700)]
lxfb: extend PLL table to support dotclocks below 25 MHz

Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to
make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25
MHz.  These are needed for small LCDs (e.g.  320x240).  Also inserts some
intermediate steps between pre-existing frequencies.

Signed-off-by: Jens Rottmann <JRottmann@LiPPERT-AT.de>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoatmel_lcdfb: adjust fifo size for at91sam9rl
Nicolas Ferre [Mon, 28 Apr 2008 09:15:21 +0000 (02:15 -0700)]
atmel_lcdfb: adjust fifo size for at91sam9rl

AT91SAM9RL soc has a 2048 bytes deep FIFO, like AT91SAM9263.

[bn@niasdigital.com: fix build breakage in atmel_lcdfb]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Nicolas FERRE <nicolas.ferre@rfo.atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoatmel_lcdfb: wiring BGR to RGB color mode
Nicolas Ferre [Mon, 28 Apr 2008 09:15:21 +0000 (02:15 -0700)]
atmel_lcdfb: wiring BGR to RGB color mode

Adds different wiring mode for the LCD screen.

The legacy atmel LCDC IP uses a non standard color mode, "BGR-555.1" instead
"RGB-565".  The major part of graphic stacks for embedded systems uses only
"RGB-565".  It is possible to swap LCD IOs instead of doing this bit swapping
by software (See application note AT91SAM9 LCD Controller
http://www.atmel.com/dyn/resources/prod_documents/doc6300.pdf)

This wire swapping is done on the at91sam9rl-ek board (board code
using this patch will come later).

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoatmel_lcdfb: suspend/resume support
David Brownell [Mon, 28 Apr 2008 09:15:20 +0000 (02:15 -0700)]
atmel_lcdfb: suspend/resume support

Teach atmel_lcdfb driver how to suspend/resume.

Note that the backlight control should probably do more of the same stuff:
turning off display power (more than just the backlight) and stopping the
clocks (and dma to drive the no-longer-seen display).  No point in wasting
power to generate images that can't be observed, after all...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoatmel_lcdfb: don't initialize a pre-allocated framebuffer
Haavard Skinnemoen [Mon, 28 Apr 2008 09:15:19 +0000 (02:15 -0700)]
atmel_lcdfb: don't initialize a pre-allocated framebuffer

If the user specified a fixed framebuffer address on the command line, it may
have been initialized already with a splash image or something, so we
shouldn't clear it.

Therefore, we should only initialize the framebuffer if we allocated it
ourselves.  This patch also updates the AVR32 setup code to clear the
framebuffer if it allocated it itself, i.e.  the user didn't provide a fixed
address or the reservation failed.

I've updated the at91 platform code as well so that it initializes the
framebuffer if it is located in SRAM, but I haven't tested that it actually
works.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Nicolas FERRE <nicolas.ferre@rfo.atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: framebuffer_alloc() fixes
Ondrej Zajicek [Mon, 28 Apr 2008 09:15:18 +0000 (02:15 -0700)]
fbdev: framebuffer_alloc() fixes

Correct the dev arg of framebuffer_alloc() in arkfb, s3fb and vt8623fb.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: vt8623fb: better resume from STR
Ondrej Zajicek [Mon, 28 Apr 2008 09:15:17 +0000 (02:15 -0700)]
fbdev: vt8623fb: better resume from STR

After resume from STR, image is shifted by 8 pixels to the left.  This patch
fixes it.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosavagefb: speed up the I2C bus
Jean Delvare [Mon, 28 Apr 2008 09:15:16 +0000 (02:15 -0700)]
savagefb: speed up the I2C bus

There is no reason to drive the savagefb I2C bus at such a low speed, so bump
it from 12.5 kbps to 50 kbps.  The Intel (i810) and Matrox framebuffer drivers
already run their I2C bus at this speed, and so are the legacy i2c-savage4 and
i2c-prosavage drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/video/imsttfb.c: add missing curly brackets
Roel Kluin [Mon, 28 Apr 2008 09:15:15 +0000 (02:15 -0700)]
drivers/video/imsttfb.c: add missing curly brackets

in #if 0 inactivated function msttfb_load_cursor_image() the call eieio()
occurs after rather than in the loop due to missing curly brackets.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouvesafb: don't treat valid modes returned byfb_find_mode() as errors
Michal Januszewski [Mon, 28 Apr 2008 09:15:15 +0000 (02:15 -0700)]
uvesafb: don't treat valid modes returned byfb_find_mode() as errors

Don't treat valid modes returned by fb_find_mode() (best-fit modes, default
modes or the first valid mode) as errors.

Currently, when fb_find_mode() finds a valid mode belonging to one of the
above-mentioned classes, uvesafb will ignore it and will try to set a 640x480
video mode.  The expected behaviour (introduced by this patch) would be to use
the valid mode returned by fb_find_mode() instead.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoradeonfb: speed up the I2C buses
Jean Delvare [Mon, 28 Apr 2008 09:15:14 +0000 (02:15 -0700)]
radeonfb: speed up the I2C buses

There is no reason to drive the radeon I2C buses at such a low speed, so bump
it from 12.5 kbps to 50 kbps.  The Intel (i810) and Matrox framebuffer drivers
already run their I2C bus at this speed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoradeonfb: drop redundant RTRACE macro
Jean Delvare [Mon, 28 Apr 2008 09:15:13 +0000 (02:15 -0700)]
radeonfb: drop redundant RTRACE macro

RTRACE() does exactly the same thing as the standard pr_debug() call, so just
use the latter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoradeonfb: fix debug option
Jean Delvare [Mon, 28 Apr 2008 09:15:12 +0000 (02:15 -0700)]
radeonfb: fix debug option

Fix CONFIG_FB_RADEON_DEBUG.  DEBUG must be defined before including any kernel
header, otherwise dev_dbg() resolves to a no-op.  Also, when debugging is
disabled, don't set DEBUG at all instead of setting it to 0, to comply with
what the kernel headers expect.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoradeonfb: use PCI device id in hex for name string
Andreas Herrmann [Mon, 28 Apr 2008 09:15:11 +0000 (02:15 -0700)]
radeonfb: use PCI device id in hex for name string

Additionally provide PCI device id in character format if possible.  (The
printable characters were commonly used to identify the cards.)

Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/video/aty/aty128fb.c: fix incorrect usage of strncat in aty128_init()
Roel Kluin [Mon, 28 Apr 2008 09:15:10 +0000 (02:15 -0700)]
drivers/video/aty/aty128fb.c: fix incorrect usage of strncat in aty128_init()

Fix incorrect length for strncat by replacing it with strlcat

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: add removed option "mode" to keep compatibility
Krzysztof Helt [Mon, 28 Apr 2008 09:15:10 +0000 (02:15 -0700)]
fbdev: add removed option "mode" to keep compatibility

Add removed option "mode" to keep compatibility with existing setups.  The
option is back for pm2fb, tridentfb and vt8623fb drivers.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agos3fb: add option mode_option
Krzysztof Helt [Mon, 28 Apr 2008 09:15:09 +0000 (02:15 -0700)]
s3fb: add option mode_option

Add the option "mode_option".  It also moves mtrr variable to devinitdata
section.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoarkfb: add option mode_option
Krzysztof Helt [Mon, 28 Apr 2008 09:15:08 +0000 (02:15 -0700)]
arkfb: add option mode_option

Add the option "mode_option".  This is one step toward changing all fb
drivers to have common "mode_option" parameter.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>