Ralf Baechle [Thu, 22 Dec 2005 12:41:29 +0000 (13:41 +0100)]
MIPS: R2: Try to bulletproof instruction_hazard against miss-compilation.
Gcc has a tradition of misscompiling the previous construct using the
address of a label as argument to inline assembler. Gas otoh has the
annoying difference between la and dla which are only usable for 32-bit
rsp. 64-bit code, so can't be used without conditional compilation.
The alterantive is switching the assembler to 64-bit code which happens
to work right even for 32-bit code ...
Maxime Bizon [Tue, 20 Dec 2005 05:32:19 +0000 (06:32 +0100)]
MIPS: R2: Fix local_irq_save()
local_irq_restore uses di which saves the whole status content, not
just the IE bit resulting in local_irq_restore() to fail. This only
happens if both CONFIG_CPU_MIPSR2 and CONFIG_IRQ_CPU are enabled.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Wed, 21 Dec 2005 02:02:26 +0000 (03:02 +0100)]
MIPS: Don't pass -finline-limit=100000.
This was a stop gap meassure for gcc 3.3 and newer sometimes not inlining
inline functions in the 2.4 days. Starting we pass the always_inline
attribute, so -finline-limit is no longer necessary and it's been shown
to problematic on Sparc.
Sergei Shtylyov [Fri, 25 Nov 2005 19:08:08 +0000 (22:08 +0300)]
MIPS: Au1550: Fix OHCI memory map size
USB OpenHCI host controller on Au1550 only decodes memory addresses from
0x14020000 to 0x1407FFFF according to the databook, which gives 0x60000
(on the prior Au1x00 chips the map size was 1MB).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 5 Dec 2005 13:47:25 +0000 (13:47 +0000)]
MIPS: DSP: eleminate used_dsp.
used_dsp was meant to be used like used_math - but since the FPU context
is small and lazy context switching is a stupid idea on multiprocessors
this idea only got halfway implemented and those bits are were now
breaking ptrace.
Oleg Nesterov [Sun, 8 Jan 2006 19:19:33 +0000 (22:19 +0300)]
[PATCH] rcu: don't set ->next_pending in rcu_start_batch()
I think it is better to set ->next_pending in the caller, when
it is needed. This saves one parameter, and this coincides with
cpu_quiet() beahaviour, which sets ->completed = ->cur itself.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Aleksey Makarov [Mon, 9 Jan 2006 23:59:27 +0000 (15:59 -0800)]
[PATCH] mutex subsystem, semaphore to completion: IDE ->gendev_rel_sem
The patch changes semaphores that are initialized as
locked to complete().
Source: MontaVista Software, Inc.
Modified-by: Steven Rostedt <rostedt@goodmis.org>
The following patch is from Montavista. I modified it slightly.
Semaphores are currently being used where it makes more sense for
completions. This patch corrects that.
Jes Sorensen [Mon, 9 Jan 2006 23:59:24 +0000 (15:59 -0800)]
[PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: Ingo Molnar <mingo@elte.hu>
(finished the conversion)
Jes Sorensen [Mon, 9 Jan 2006 23:59:21 +0000 (15:59 -0800)]
[PATCH] mutex subsystem, semaphore to mutex: XFS
This patch switches XFS over to use the new mutex code directly as
opposed to the previous workaround patch I posted earlier that avoided
the namespace clash by forcing it back to semaphores. This falls in the
'works for me<tm>' category.
add the per-arch mutex.h files for the remaining architectures.
We default to asm-generic/mutex-dec.h, because that performs
quite well on most arches. Arches that do not have atomic
decrement/increment instructions should switch to mutex-xchg.h
instead. Arches can also provide their own implementation for
the mutex fastpath primitives.
Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add three (generic) mutex fastpath implementations.
The mutex-xchg.h implementation is atomic_xchg() based, and should
work fine on every architecture.
The mutex-dec.h implementation is atomic_dec_return() based - this
one too should work on every architecture, but might not perform the
most optimally on architectures that have no atomic-dec/inc instructions.
The mutex-null.h implementation forces all calls into the slowpath. This
is used for mutex debugging, but it can also be used on platforms that do
not want (or need) a fastpath at all.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Pierre Ossman [Mon, 9 Jan 2006 22:51:46 +0000 (22:51 +0000)]
[MMC] Indicate that R1/R1b contains command opcode
Some controllers actually check the first byte of the response (most
don't). This byte contains the command opcode for R1/R1b and all 1:s
for other types. The difference must be indicated to the controller
so it knows which reply to expect.
Problem narrowed down by Luis F. Ortiz and Richard Mortimer.
I tried using %l2 as suggested by Luis and that works for me.
Looking at the code I wonder if it makes sense to simplify the code
a little bit. The following works for me but I'm not sure how to
exercise the "NOERROR" codepath.
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 9 Jan 2006 06:36:54 +0000 (22:36 -0800)]
[IPV4]: ip_output.c needs xfrm.h
This patch fixes a warning from my IPsec patches:
CC net/ipv4/ip_output.o
net/ipv4/ip_output.c: In function 'ip_finish_output':
net/ipv4/ip_output.c:208: warning: implicit declaration of function
'xfrm4_output_finish'
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
A new device to do intermidiate functional block in a system shared
manner. To use the new functionality, you need to turn on
qos/classifier actions.
The new functionality can be grouped as:
1) qdiscs/policies that are per device as opposed to system wide. ifb
allows for a device which can be redirected to thus providing an
impression of sharing.
2) Allows for queueing incoming traffic for shaping instead of
dropping.
Packets are redirected to this device using tc/action mirred redirect
construct. If they are sent to it by plain routing instead then they
will merely be dropped and the stats would indicate that.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 9 Jan 2006 06:15:34 +0000 (22:15 -0800)]
[PKT_SCHED]: Convert tc action functions to single skb pointers
tcf_action_exec only gets a single skb pointer and doesn't own the skb,
but passes double skb pointers (to a local variable) to the action
functions. Change to use single skb pointers everywhere.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sat, 7 Jan 2006 05:38:15 +0000 (16:38 +1100)]
[CRYPTO] cipher: Set alignmask for multi-byte loads
Many cipher implementations use 4-byte/8-byte loads/stores which require
alignment on some architectures. This patch explicitly sets the alignment
requirements for them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Pitre [Sun, 13 Nov 2005 00:17:33 +0000 (11:17 +1100)]
[CRYPTO] sha1: Avoid shifting count left and right
This patch avoids shifting the count left and right needlessly for each
call to sha1_update(). It instead can be done only once at the end in
sha1_final().
Keeping the previous test example (sha1_update() successively called with
len=64), a 1.3% performance increase can be observed on i386, or 0.2% on
ARM. The generated code is also smaller on ARM.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Pitre [Sat, 12 Nov 2005 23:47:20 +0000 (10:47 +1100)]
[CRYPTO] sha1: Avoid useless memcpy()
The current code unconditionally copy the first block for every call to
sha1_update(). This can be avoided if there is no pending partial block.
This is always the case on the first call to sha1_update() (if the length
is >= 64 of course.
Furthermore, temp does need to be called if sha_transform is never invoked.
Also consolidate the sha_transform calls into one to reduce code size.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sat, 5 Nov 2005 07:06:26 +0000 (18:06 +1100)]
[CRYPTO] Allow AES C/ASM implementations to coexist
As the Crypto API now allows multiple implementations to be registered
for the same algorithm, we no longer have to play tricks with Kconfig
to select the right AES implementation.
This patch sets the driver name and priority for all the AES
implementations and removes the Kconfig conditions on the C implementation
for AES.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sat, 5 Nov 2005 05:58:14 +0000 (16:58 +1100)]
[CRYPTO] Allow multiple implementations of the same algorithm
This is the first step on the road towards asynchronous support in
the Crypto API. It adds support for having multiple crypto_alg objects
for the same algorithm registered in the system.
For example, each device driver would register a crypto_alg object
for each algorithm that it supports. While at the same time the
user may load software implementations of those same algorithms.
Users of the Crypto API may then select a specific implementation
by name, or choose any implementation for a given algorithm with
the highest priority.
The priority field is a 32-bit signed integer. In future it will be
possible to modify it from user-space.
This also provides a solution to the problem of selecting amongst
various AES implementations, that is, aes vs. aes-i586 vs. aes-padlock.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 30 Oct 2005 10:25:15 +0000 (21:25 +1100)]
[CRYPTO] Use standard byte order macros wherever possible
A lot of crypto code needs to read/write a 32-bit/64-bit words in a
specific gender. Many of them open code them by reading/writing one
byte at a time. This patch converts all the applicable usages over
to use the standard byte order macros.
This is based on a previous patch by Denis Vlasenko.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
projects / linux-2.6 / log