Finn Thain [Fri, 25 Apr 2008 15:06:05 +0000 (10:06 -0500)]
[SCSI] m68k: new mac_esp scsi driver
Replace the mac_esp driver with a new one based on the esp_scsi core.
For esp_scsi: add support for sync transfers for the PIO mode, add a new
esp_driver_ops method to get the maximum dma transfer size (like the old
NCR53C9x driver), and some cleanups.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs
The new FCP adapter statistics provide a variety of information about
the virtual adapter (subchannel). In order to collect this information
the zfcp driver is extended to query this information.
The information provided by the new FCP adapter statistics can be
fetched by reading from the following files in the sysfs filesystem
These are the statistics on a virtual adapter (subchannel) level.
The information provided is raw and not modified or interpreted by any
means. No interpretation or modification of the values is done by the
zfcp driver.
When statistics are polled from sysfs, the statistics use the same
commands as the adapter initialization. Change the messages printed
here, so they are only printed during initialization and not for each
poll of adapter data.
[SCSI] zfcp: Wait for free SBAL during exchange config
When sending a exchange config data command, wait for a free SBAL.
This does not matter during adapter initialization, but this is
required for pulling adapter statistics during high I/O load.
James Smart [Thu, 24 Apr 2008 16:12:46 +0000 (12:12 -0400)]
[SCSI] scsi_transport_fc: fc_user_scan correction
Way back when, when the fc_user_scan routine was created, it kept some
of its original logic that walked the rport list and kicked off a scan.
Unfortunately, it didn't keep any of the locking around the rport list,
nor did it consider the synchronous nature of the scan invoked. The result,
there are some scan requests where the rport list changes, thus a subsequent
scan is called on a bogus rport structure and the system NMI's.
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Jeff Garzik [Thu, 24 Apr 2008 23:45:32 +0000 (19:45 -0400)]
[SCSI] aha1542: minor irq handler cleanups
- where the 'irq' function argument is known never to be used, rename
it to 'dummy' to make this more obvious
- replace per-irq lookup functions and tables with a direct reference
to data object obtained via 'dev_id' function argument, passed from
request_irq()
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Adrian Bunk [Wed, 23 Apr 2008 09:51:10 +0000 (12:51 +0300)]
[SCSI] FlashPoint: fix off-by-one errors
This patch fixes off-by-one errors in error checks (the variables are
used as array indexes for arrays with MAX_SCSI_TAR resp. MAX_LUN
elements) spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Wed, 23 Apr 2008 09:39:49 +0000 (11:39 +0200)]
[SCSI] aic7xxx: Update type check in aicasm grammar
The function type_check() in aicasm grammar code was
never used properly due to a bug.
This patch fixes it up and ensures it's only called if appropriate.
In addition the unused 16bit instruction are disabled, but left in
the code for reference.
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Mon, 21 Apr 2008 15:57:20 +0000 (10:57 -0500)]
[SCSI] fix SLUB WARN_ON
We're getting a WARN_ON from SLUB indicating that we're trying to free
caches with in-use objects. The root cause is a new dependency in the
command/sense free on unchecked_isa_dma. The WARN_ON is caused by
drivers which change this in their setup after the command/sense cache
is allocated.
The fix is to move the allocation of this cache into scsi_add_host()
so things like gdth have an opportunity to modify it between alloc and
add (but *not* after).
The true fix would be to move unchecked_isa_dma into the template and
out of the host, so it because a truly read only variable.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Jeff Garzik [Fri, 18 Apr 2008 23:22:52 +0000 (19:22 -0400)]
[SCSI] aha152x, eata, u14-34f: minor irq handler cleanups
- remove pointless casts from void*
- remove needless references to 'irq' function argument, when that
information is already stored somewhere in a driver-private struct.
- where the 'irq' function argument is known never to be used, rename
it to 'dummy' to make this more obvious
- remove always-false tests for dev_id==NULL
- remove always-true tests for 'irq == host_struct->irq'
- replace per-irq lookup functions and tables with a direct reference
to data object obtained via 'dev_id' function argument, passed from
request_irq()
This change's main purpose is to prepare for the patchset in
jgarzik/misc-2.6.git#irq-remove, that explores removal of the
never-used 'irq' argument in each interrupt handler.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Sergei Shtylyov [Fri, 18 Apr 2008 19:39:03 +0000 (23:39 +0400)]
[SCSI] aic79xx: fix MMIO for PPC 44x platforms
The driver stores the PCI resource address into 'u_long' variable before
calling ioremap_nocache() on it. This warrants kernel oops when the registers
are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space
mapped beyond 4 GB.
The arch/ppc/ kernel has a fixup in ioremap() that helps create an illusion
that the PCI memory resources are mapped below 4 GB, but arch/powerpc/ code
got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Sergei Shtylyov [Fri, 18 Apr 2008 19:30:45 +0000 (23:30 +0400)]
[SCSI] aic7xxx: fix MMIO for PPC 44x platforms
The driver stores the PCI resource address into 'u_long' variable before
calling ioremap_nocache() on it. This warrants kernel oops when the registers
are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space
mapped beyond 4 GB.
The arch/ppc/ kernel has a fixup in ioremap() that helps create an illusion
that the PCI memory resources are mapped below 4 GB, but arch/powerpc/ code
got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[SCSI] scsi_transport_sas: fix the lifetime of sas bsg objects
scsi_transport_sas calls blk_cleanup_queue too early for bsg
queues. If a user holds a sas_host, end_device, or expander device
open, remove the device, then send a request to it, we get a kernel
crash. We need to call blk_cleanup_queue in the release callback as we
do with scsi devices.
This patch moves blk_cleanup_queue to sas_expander_release and
sas_end_device_release from sas_bsg_remove. sas_host can't use the
release callback in struct device so use bsg's release callback.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
This patch adds release callback support, which is called when a bsg
device goes away. bsg_register_queue() takes a pointer to a callback
function. This feature is useful for stuff like sas_host that can't
use the release callback in struct device.
If a caller doesn't need bsg's release callback, it can call
bsg_register_queue() with NULL pointer (e.g. scsi devices can use
release callback in struct device so they don't need bsg's callback).
With this patch, bsg uses kref for refcounts on bsg devices instead of
get/put_device in fops->open/release. bsg calls put_device and the
caller's release callback (if it was registered) in kref_put's
release.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Sun, 23 Mar 2008 03:42:27 +0000 (22:42 -0500)]
[SCSI] rework scsi_target allocation
The current target allocation code registeres each possible target
with sysfs; it will be deleted again if no useable LUN on this target
was found. This results in a string of 'target add/target remove' uevents.
Based on a patch by Hannes Reinecke <hare@suse.de> this patch reworks
the target allocation code so that only uevents for existing targets
are sent. The sysfs registration is split off from the existing
scsi_target_alloc() into a in a new scsi_add_target() function, which
should be called whenever an existing target is found. Only then a
uevent is sent, so we'll be generating events for existing targets
only.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Tue, 18 Mar 2008 13:32:28 +0000 (14:32 +0100)]
[SCSI] use default attributes for scsi_host
This patch removes the unused sysfs attibute overwriting logic for
the scsi host attibutes, and plugs them into the driver core default
attribute creation.
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Fri, 21 Mar 2008 01:47:52 +0000 (20:47 -0500)]
[SCSI] sysfs: make group is_valid return a mode_t
We have a problem in scsi_transport_spi in that we need to customise
not only the visibility of the attributes, but also their mode. Fix
this by making the is_visible() callback return a mode, with 0
indicating is not visible.
Also add a sysfs_update_group() API to allow us to change either the
visibility or mode of the files at any time on the fly.
Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Tue, 18 Mar 2008 13:32:28 +0000 (14:32 +0100)]
[SCSI] qla2xxx, lfpc: Rename 'state' attribute to 'link_state'
lpfc and qla2xxx overwrite the standard 'state' attribute with
custom callbacks. So rename the custom attributes to 'link_state'
and retain the original meaning of the 'state' attribute.
Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Tue, 18 Mar 2008 13:32:28 +0000 (14:32 +0100)]
[SCSI] add scsi_host and scsi_target to scsi_bus
This patch implements scsi_host and scsi_target device types
and adds both to the scsi_bus.
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Sat, 15 Mar 2008 18:01:40 +0000 (13:01 -0500)]
[SCSI] ses: fix up functionality after class_device->device conversion
ses uses an unusual two level class hierarchy which broke in this
conversion. Fix it up still with a two level hierarchy, but this time
let the ses device manage the links to and from the real device in the
enclosure.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Roland Dreier [Tue, 22 Apr 2008 01:19:15 +0000 (18:19 -0700)]
IB/ipath: Remove tests of PCI_MSI in ipath_iba7220.c
The PCI MSI interface is stubbed out properly so that all the
functions just return failure if PCI_MSI=n, so there's no reason to
have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c.
Roland Dreier [Tue, 22 Apr 2008 01:19:14 +0000 (18:19 -0700)]
IB/ipath: Remove dependency on PCI_MSI || HT_IRQ
Before IBA7220 support was added, the ipath driver didn't support any
hardware unless PCI_MSI and/or HT_IRQ was enabled. However, the
IBA7220 can generate INTx interrupts, so it makes sense to allow the
driver to be build even if PCI_MSI=n and HT_IRQ=n.
Roland Dreier [Tue, 22 Apr 2008 01:19:14 +0000 (18:19 -0700)]
IB/ipath: Build IBA7220 code unconditionally
The new IBA7220 code added a call to ipath_init_iba7220_funcs() that
is compiled unconditionally, but only built the IBA7220 code if
PCI_MSI is enabled. Fix this by building the IBA7220 file
unconditonally.
This fixes build breakage when PCI_MSI=n, HT_IRQ=y and
INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>:
drivers/built-in.o: In function `ipath_init_one':
ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs'
Roland Dreier [Tue, 22 Apr 2008 01:19:14 +0000 (18:19 -0700)]
IB/ipath: Remove reference to dev->class_dev
Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in
build") inadvertently added core to set dev->class_dev.dev back into
ib_ipath. This is completely redundant since commit 1912ffbb ("IB: Set
class_dev->dev in core for nice device symlink"), which removed
class_dev setting from low-level drivers, and also will break the build
when class_dev is removed completely from struct ib_device.
Paul Bolle [Tue, 22 Apr 2008 01:19:13 +0000 (18:19 -0700)]
IB/ipath: Fix module parameter description for disable_sma
Describe disable_sma parameter with its name rather than the internal
ib_ipath_disable_sma variable name, so that the description shows up
properly in modinfo.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (26 commits)
mmc: sdio_ops.c should #include "sdio_ops.h"
mmc: proper prototypes for mmc_attach_*()
mmc: make __mmc_release_bus() static
sdhci: improve no card, no reset quirk
MMC: OMAP: Do not busy wait for end of command for ever
MMC: OMAP: Start new commands from work queue instead of irq
MMC: OMAP: Lazy clock shutdown
MMC: OMAP: Move failing command abortion to workqueue
MMC: OMAP: Use tasklet instead of workqueue for cover switch notification
MMC: OMAP: Check the get_cover_state function pointer if not set
MMC: OMAP: Using setup_timer instead of init_timer
MMC: OMAP: Abort stuck commands
MMC: OMAP: General cleanup for MMC multislot support
MMC: OMAP: Power functions modified to MMC multislot support
MMC: OMAP: Fix timeout calculation for MMC multislot support
MMC: OMAP: New release dma and abort xfer functions
MMC: OMAP: Add back cover switch support
MMC: OMAP: Introduce new multislot structure and change driver to use it
MMC: OMAP: Remove cover switch handling to allow adding multislot support
MMC: OMAP: Fix the BYTEBLOCK capability removal
...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits)
DOC: A couple corrections and clarifications in USB doc.
Generate a slightly more informative error msg for bad HZ
fix typo "is" -> "if" in Makefile
ext*: spelling fix prefered -> preferred
DOCUMENTATION: Use newer DEFINE_SPINLOCK macro in docs.
KEYS: Fix the comment to match the file name in rxrpc-type.h.
RAID: remove trailing space from printk line
DMA engine: typo fixes
Remove unused MAX_NODES_SHIFT
MAINTAINERS: Clarify access to OCFS2 development mailing list.
V4L: Storage class should be before const qualifier (sn9c102)
V4L: Storage class should be before const qualifier
sonypi: Storage class should be before const qualifier
intel_menlow: Storage class should be before const qualifier
DVB: Storage class should be before const qualifier
arm: Storage class should be before const qualifier
ALSA: Storage class should be before const qualifier
acpi: Storage class should be before const qualifier
firmware_sample_driver.c: fix coding style
MAINTAINERS: Add ati_remote2 driver
...
Fixed up trivial conflicts in firmware_sample_driver.c
Merge branch 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block:
block: fix blk_register_queue() return value
block: fix memory hotplug and bouncing in block layer
block: replace remaining __FUNCTION__ occurrences
Kconfig: clean up block/Kconfig help descriptions
cciss: fix warning oops on rmmod of driver
cciss: Fix race between disk-adding code and interrupt handler
block: move the padding adjustment to blk_rq_map_sg
block: add bio_copy_user_iov support to blk_rq_map_user_iov
block: convert bio_copy_user to bio_copy_user_iov
loop: manage partitions in disk image
cdrom: use kmalloced buffers instead of buffers on stack
cdrom: make unregister_cdrom() return void
cdrom: use list_head for cdrom_device_info list
cdrom: protect cdrom_device_info list by mutex
cdrom: cleanup hardcoded error-code
cdrom: remove ifdef CONFIG_SYSCTL
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
[HWRNG] omap: Minor updates
[CRYPTO] kconfig: Ordering cleanup
[CRYPTO] all: Clean up init()/fini()
[CRYPTO] padlock-aes: Use generic setkey function
[CRYPTO] aes: Export generic setkey
[CRYPTO] api: Make the crypto subsystem fully modular
[CRYPTO] cts: Add CTS mode required for Kerberos AES support
[CRYPTO] lrw: Replace all adds to big endians variables with be*_add_cpu
[CRYPTO] tcrypt: Change the XTEA test vectors
[CRYPTO] tcrypt: Shrink the tcrypt module
[CRYPTO] tcrypt: Change the usage of the test vectors
[CRYPTO] api: Constify function pointer tables
[CRYPTO] aes-x86-32: Remove unused return code
[CRYPTO] tcrypt: Shrink speed templates
[CRYPTO] tcrypt: Group common speed templates
[CRYPTO] sha512: Rename sha512 to sha512_generic
[CRYPTO] sha384: Hardware acceleration for s390
[CRYPTO] sha512: Hardware acceleration for s390
[CRYPTO] s390: Generic sha_update and sha_final
[CRYPTO] api: Switch to proc_create()
Merge branch 'irq-cleanups-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6
* 'irq-cleanups-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
[ISDN] minor irq handler cleanups
drivers/char: minor irq handler cleanups
[PPC] minor irq handler cleanups
[BLACKFIN] minor irq handler cleanups
[SPARC] minor irq handler cleanups
ARM minor irq handler cleanup: avoid passing unused info to irq
Roland McGrath [Sun, 20 Apr 2008 20:10:12 +0000 (13:10 -0700)]
ptrace: compat_ptrace_request siginfo
This adds support for PTRACE_GETSIGINFO and PTRACE_SETSIGINFO in
compat_ptrace_request. It relies on existing arch definitions for
copy_siginfo_to_user32 and copy_siginfo_from_user32.
On powerpc, this fixes a longstanding regression of 32-bit ptrace
calls on 64-bit kernels vs native calls (64-bit calls or 32-bit
kernels). This can be seen in a 32-bit call using PTRACE_GETSIGINFO
to examine e.g. siginfo_t.si_addr from a signal that sets it.
(This was broken as of 2.6.24 and, I presume, many or all prior versions.)
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits)
[POWERPC] Fix compile breakage for 64-bit UP configs
[POWERPC] Define copy_siginfo_from_user32
[POWERPC] Add compat handler for PTRACE_GETSIGINFO
[POWERPC] i2c: Fix build breakage introduced by OF helpers
[POWERPC] Optimize fls64() on 64-bit processors
[POWERPC] irqtrace support for 64-bit powerpc
[POWERPC] Stacktrace support for lockdep
[POWERPC] Move stackframe definitions to common header
[POWERPC] Fix device-tree locking vs. interrupts
[POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const
[POWERPC] Remove unused __max_memory variable
[POWERPC] Simplify xics direct/lpar irq_host setup
[POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()
[POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()
[POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c
[POWERPC] Use asm-generic/bitops/find.h in bitops.h
[POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup
[POWERPC] 85xx: Fix the size of qe muram for MPC8568E
[POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier.
[POWERPC] 86xx: mark functions static, other minor cleanups
...
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
SCSI: convert struct class_device to struct device
DRM: remove unused dev_class
IB: rename "dev" to "srp_dev" in srp_host structure
IB: convert struct class_device to struct device
memstick: convert struct class_device to struct device
driver core: replace remaining __FUNCTION__ occurrences
sysfs: refill attribute buffer when reading from offset 0
PM: Remove destroy_suspended_device()
Firmware: add iSCSI iBFT Support
PM: Remove legacy PM (fix)
Kobject: Replace list_for_each() with list_for_each_entry().
SYSFS: Explicitly include required header file slab.h.
Driver core: make device_is_registered() work for class devices
PM: Convert wakeup flag accessors to inline functions
PM: Make wakeup flags available whenever CONFIG_PM is set
PM: Fix misuse of wakeup flag accessors in serial core
Driver core: Call device_pm_add() after bus_add_device() in device_add()
PM: Handle device registrations during suspend/resume
block: send disk "change" event for rescan_partitions()
sysdev: detect multiple driver registrations
...
Fixed trivial conflict in include/linux/memory.h due to semaphore header
file change (made irrelevant by the change to mutex).
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
rose: Socket lock was not released before returning to user space
hci_usb: remove code obfuscation
drivers/net/appletalk: use time_before, time_before_eq, etc
drivers/atm: use time_before, time_before_eq, etc
hci_usb: do not initialize static variables to 0
tg3: 5701 DMA corruption fix
atm nicstar: Removal of debug code containing deprecated calls to cli()/sti()
iwlwifi: Fix unconditional access to station->tidp[].agg.
netfilter: Fix SIP conntrack build with NAT disabled.
netfilter: Fix SCTP nat build.
Robert P. J. Day [Mon, 21 Apr 2008 22:43:55 +0000 (22:43 +0000)]
KEYS: Fix the comment to match the file name in rxrpc-type.h.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
hrtimer: optimize the softirq time optimization
hrtimer: reduce calls to hrtimer_get_softirq_time()
clockevents: fix typo in tick-broadcast.c
jiffies: add time_is_after_jiffies and others which compare with jiffies
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: (62 commits)
sched: build fix
sched: better rt-group documentation
sched: features fix
sched: /debug/sched_features
sched: add SCHED_FEAT_DEADLINE
sched: debug: show a weight tree
sched: fair: weight calculations
sched: fair-group: de-couple load-balancing from the rb-trees
sched: fair-group scheduling vs latency
sched: rt-group: optimize dequeue_rt_stack
sched: debug: add some debug code to handle the full hierarchy
sched: fair-group: SMP-nice for group scheduling
sched, cpuset: customize sched domains, core
sched, cpuset: customize sched domains, docs
sched: prepatory code movement
sched: rt: multi level group constraints
sched: task_group hierarchy
sched: fix the task_group hierarchy for UID grouping
sched: allow the group scheduler to have multiple levels
sched: mix tasks and groups
...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (77 commits)
x86: UV startup of slave cpus
x86: integrate pci-dma.c
x86: don't do dma if mask is NULL.
x86: return conditional to mmu
x86: remove kludge from x86_64
x86: unify gfp masks
x86: retry allocation if failed
x86: don't try to allocate from DMA zone at first
x86: use a fallback dev for i386
x86: use numa allocation function in i386
x86: remove virt_to_bus in pci-dma_64.c
x86: adjust dma_free_coherent for i386
x86: move bad_dma_address
x86: isolate coherent mapping functions
x86: move dma_coherent functions to pci-dma.c
x86: merge iommu initialization parameters
x86: merge dma_supported
x86: move pci fixup to pci-dma.c
x86: move x86_64-specific to common code.
x86: move initialization functions to pci-dma.c
...
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (27 commits)
sh: Fix up L2 cache probe.
sh: Fix up SH-4A part probe.
sh: Add support for SH7723 CPU subtype.
sh: Fix up SH7763 build.
sh: Add migor_ts support to MigoR
sh: Add rs5c732b RTC support to MigoR
sh: Add I2C support to MigoR
sh: Add I2C platform data to sh7722
sh: MigoR NAND flash support using gen_flash
sh: MigoR NOR flash support using physmap-flash
sh: Fix up mach-types formatting from merge damage.
sh: r7780rp: Hook up the I2C and SMBus platform devices.
sh: Use phyical addresses for MigoR smc91x resources
sh: Use physical addresses for sh7722 USBF resources
sh: Add MigoR header file
Fix sh_keysc double free
sh: Fix up __access_ok() check for nommu.
sh: Allow optimized clear/copy page routines to be used on SH-2.
sh: Hook up the rest of the SH7770 serial ports.
sh: Add support for Solution Engine SH7721 board
...
The RCU iterators used 'rcu_dereference()' on an already-fetched RCU
pointer value, which defeats the whole point of the exercise.
When we dereference a pointer protected by RCU, we need to make sure
that we only fetch the value _once_, because if the compiler ends up
re-loading it due to register pressure, the newly reloaded value could
be different from the previously fetched one, and you get inconsistent
results.
Cleaned-up, fixed, and the pointless list_for_each_safe_rcu #define
deleted by Paul Kenney.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Thu, 17 Apr 2008 18:42:10 +0000 (14:42 -0400)]
SELinux: one little, two little, three little whitespaces, the avc.c saga.
avc.c was bad. It had whitespace and syntax issues which are against
our coding style. I have had a little chat with it and the result of
that conversation looked like this patch.
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Thu, 17 Apr 2008 18:15:45 +0000 (14:15 -0400)]
SELinux: cleanup on isle selinuxfs.c
Why would anyone just clean up white space all day? Because they were
out too late last night and don't want to think for a day. So here is a
nice clean selinuxfs.c patch.
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Thu, 17 Apr 2008 17:37:12 +0000 (13:37 -0400)]
changing whitespace for fun and profit: policydb.c
More formatting changes. Aside from the 80 character line limit even
the checkpatch scripts like this file now. Too bad I don't get paid by
the lines of code I change.
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Thu, 17 Apr 2008 17:17:49 +0000 (13:17 -0400)]
SELinux: whitespace and formating fixes for hooks.c
All whitespace and formatting. Nothing interesting to see here. About
the only thing to remember is that we aren't supposed to initialize
static variables to 0/NULL. It is done for us and doing it ourselves
puts them in a different section.
With this patch running checkpatch.pl against hooks.c only gives us
complaints about busting the 80 character limit and declaring extern's
in .c files. Apparently they don't like it, but I don't feel like going
to the trouble of moving those to .h files...
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Thu, 17 Apr 2008 15:52:44 +0000 (11:52 -0400)]
SELinux: clean up printks
Make sure all printk start with KERN_*
Make sure all printk end with \n
Make sure all printk have the word 'selinux' in them
Change "function name" to "%s", __func__ (found 2 wrong)
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:34 +0000 (17:38 -0400)]
SELinux: sidtab.c whitespace, syntax, and static declaraction cleanups
This patch changes sidtab.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:33 +0000 (17:38 -0400)]
SELinux: services.c whitespace, syntax, and static declaraction cleanups
This patch changes services.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:32 +0000 (17:38 -0400)]
SELinux: mls.c whitespace, syntax, and static declaraction cleanups
This patch changes mls.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:31 +0000 (17:38 -0400)]
SELinux: hashtab.c whitespace, syntax, and static declaraction cleanups
This patch changes hashtab.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:30 +0000 (17:38 -0400)]
SELinux: ebitmap.c whitespace, syntax, and static declaraction cleanups
This patch changes ebitmap.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:29 +0000 (17:38 -0400)]
SELinux: conditional.c whitespace, syntax, and static declaraction cleanups
This patch changes conditional.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:28 +0000 (17:38 -0400)]
SELinux: avtab.c whitespace, syntax, and static declaraction cleanups
This patch changes avtab.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:27 +0000 (17:38 -0400)]
SELinux: xfrm.c whitespace, syntax, and static declaraction cleanups
This patch changes xfrm.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:26 +0000 (17:38 -0400)]
SELinux: nlmsgtab.c whitespace, syntax, and static declaraction cleanups
This patch changes nlmsgtab.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:25 +0000 (17:38 -0400)]
SELinux: netnode.c whitespace, syntax, and static declaraction cleanups
This patch changes netnode.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Fri, 18 Apr 2008 21:38:24 +0000 (17:38 -0400)]
SELinux: netlink.c whitespace, syntax, and static declaraction cleanups
This patch changes netlink.c to fix whitespace and syntax issues. Things that
are fixed may include (does not not have to include)
whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
locateion of { around struct and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
and any number of other things I forgot to mention
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
projects / linux-2.6 / log