Currently rpc_mkdir/rpc_rmdir and rpc_mkpipe/mk_unlink have an API that's
a little unfortunate. They take a path relative to the rpc_pipefs root and
thus need to perform a full lookup. If you look at debugfs or usbfs they
always store the dentry for directories they created and thus can pass in
a dentry + single pathname component pair into their equivalents of the
above functions.
And in fact rpc_pipefs actually stores a dentry for all but one component so
this change not only simplifies the core rpc_pipe code but also the callers.
Unfortuntately this code path is only used by the NFS4 idmapper and
AUTH_GSSAPI for which I don't have a test enviroment. Could someone give
it a spin? It's the last bit needed before we can rework the
lookup_hash API
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:55 +0000 (16:25 -0700)]
[PATCH] RPC: parametrize various transport connect timeouts
Each transport implementation can now set unique bind, connect,
reestablishment, and idle timeout values. These are variables,
allowing the values to be modified dynamically. This permits
exponential backoff of any of these values, for instance.
As an example, we implement exponential backoff for the connection
reestablishment timeout.
Test-plan:
Destructive testing (unplugging the network temporarily). Connectathon
with UDP and TCP.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:55 +0000 (16:25 -0700)]
[PATCH] RPC: make sure to get the same local port number when reconnecting
Implement a best practice: if the remote end drops our connection, try to
reconnect using the same port number. This is important because the NFS
server's Duplicate Reply Cache often hashes on the source port number.
If the client reuses the port number when it reconnects, the server's DRC
will be more effective.
Based on suggestions by Mike Eisler, Olaf Kirch, and Alexey Kuznetsky.
Test-plan:
Destructive testing.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:54 +0000 (16:25 -0700)]
[PATCH] RPC: allow RPC client's port range to be adjustable
Select an RPC client source port between 650 and 1023 instead of between
1 and 800. The old range conflicts with a number of network services.
Provide sysctls to allow admins to select a different port range.
Note that this doesn't affect user-level RPC library behavior, which
still uses 1 to 800.
Based on a suggestion by Olaf Kirch <okir@suse.de>.
Test-plan:
Repeated mount and unmount. Destructive testing. Idle timeouts.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:54 +0000 (16:25 -0700)]
[PATCH] RPC: clean up after nocong was removed
Clean-up: Move some macros that are specific to the Van Jacobson
implementation into xprt.c. Get rid of the cong_wait field in
rpc_xprt, which is no longer used. Get rid of xprt_clear_backlog.
Test-plan:
Compile with CONFIG_NFS enabled.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:53 +0000 (16:25 -0700)]
[PATCH] RPC: remove xprt->nocong
Get rid of the "xprt->nocong" variable.
Test-plan:
Use WAN simulation to cause sporadic bursty packet loss with UDP mounts.
Look for significant regression in performance or client stability.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:53 +0000 (16:25 -0700)]
[PATCH] RPC: add a release_rqst callout to the RPC transport switch
The final place where congestion control state is adjusted is in
xprt_release, where each request is finally released. Add a callout
there to allow transports to perform additional processing when a
request is about to be released.
Test-plan:
Use WAN simulation to cause sporadic bursty packet loss. Look for significant
regression in performance or client stability.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:52 +0000 (16:25 -0700)]
[PATCH] RPC: separate xprt_timer implementations
Allow transports to hook the retransmit timer interrupt. Some transports
calculate their congestion window here so that a retransmit timeout has
immediate effect on the congestion window.
Test-plan:
Use WAN simulation to cause sporadic bursty packet loss. Look for significant
regression in performance or client stability.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:51 +0000 (16:25 -0700)]
[PATCH] RPC: expose API for serializing access to RPC transports
The next method we abstract is the one that releases a transport,
allowing another task to have access to the transport.
Again, one generic version of this is provided for transports that
don't need the RPC client to perform congestion control, and one
version is for transports that can use the original Van Jacobson
implementation in xprt.c.
Test-plan:
Use WAN simulation to cause sporadic bursty packet loss. Look for
significant regression in performance or client stability.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:51 +0000 (16:25 -0700)]
[PATCH] RPC: expose API for serializing access to RPC transports
The next several patches introduce an API that allows transports to
choose whether the RPC client provides congestion control or whether
the transport itself provides it.
The first method we abstract is the one that serializes access to the
RPC transport to prevent the bytes from different requests from mingling
together. This method provides proper request serialization and the
opportunity to prevent new requests from being started because the
transport is congested.
The normal situation is for the transport to handle congestion control
itself. Although NFS over UDP was first, it has been recognized after
years of experience that having the transport provide congestion control
is much better than doing it in the RPC client. Thus TCP, and probably
every future transport implementation, will use the default method,
xprt_lock_write, provided in xprt.c, which does not provide any kind
of congestion control. UDP can continue using the xprt.c-provided
Van Jacobson congestion avoidance implementation.
Test-plan:
Use WAN simulation to cause sporadic bursty packet loss. Look for significant
regression in performance or client stability.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 25 Aug 2005 23:25:50 +0000 (16:25 -0700)]
[PATCH] RPC: add API to set transport-specific timeouts
Prepare the way to remove the "xprt->nocong" variable by adding a callout
to the RPC client transport switch API to handle setting RPC retransmit
timeouts.
Add a pair of generic helper functions that provide the ability to set a
simple fixed timeout, or to set a timeout based on the state of a round-
trip estimator.
Test-plan:
Use WAN simulation to cause sporadic bursty packet loss. Look for significant
regression in performance or client stability.
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 11 Aug 2005 20:25:56 +0000 (16:25 -0400)]
[PATCH] RPC: separate TCP and UDP socket write paths
Split the RPC client's main socket write path into a TCP version and a UDP
version to eliminate another dependency on the "xprt->stream" variable.
Compiler optimization removes unneeded code from xs_sendpages, as this
function is now called with some constant arguments.
We can now cleanly perform transport protocol-specific return code testing
and error recovery in each path.
Test-plan:
Millions of fsx operations. Performance characterization such as
"sio" or "iozone". Examine oprofile results for any changes before and
after this patch is applied.
Version: Thu, 11 Aug 2005 16:08:46 -0400
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 11 Aug 2005 20:25:44 +0000 (16:25 -0400)]
[PATCH] RPC: Add helper for waking tasks pending on a transport
Clean-up: remove only reference to xprt->pending from the socket transport
implementation. This makes a cleaner interface for other transport
implementations as well.
Test-plan:
Compile kernel with CONFIG_NFS enabled.
Version: Thu, 11 Aug 2005 16:06:52 -0400
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 11 Aug 2005 20:25:26 +0000 (16:25 -0400)]
[PATCH] RPC: transport switch function naming
Introduce block header comments and a function naming convention to the
socket transport implementation. Provide a debug setting for transports
that is separate from RPCDBG_XPRT. Eliminate xprt_default_timeout().
Provide block comments for exposed interfaces in xprt.c, and eliminate
the useless obvious comments.
Convert printk's to dprintk's.
Test-plan:
Compile kernel with CONFIG_NFS enabled.
Version: Thu, 11 Aug 2005 16:04:04 -0400
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 11 Aug 2005 20:25:23 +0000 (16:25 -0400)]
[PATCH] RPC: introduce client-side transport switch
Move the bulk of client-side socket-specific code into a separate source
file, net/sunrpc/xprtsock.c.
Test-plan:
Millions of fsx operations. Performance characterization such as "sio" or
"iozone". Destructive testing (unplugging the network temporarily, server
reboots). Connectathon with v2, v3, and v4.
Version: Thu, 11 Aug 2005 16:03:38 -0400
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 11 Aug 2005 20:25:17 +0000 (16:25 -0400)]
[PATCH] RPC: portmapper doesn't need a reserved port
The in-kernel portmapper does not require a reserved port for making
bind queries.
Test-plan:
Tens of runs of the Connectathon locking suite with TCP and UDP
against several other NFS server implementations using NFSv3,
not NFSv4 (which doesn't require rpcbind).
Version: Thu, 11 Aug 2005 16:02:43 -0400
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 11 Aug 2005 20:25:14 +0000 (16:25 -0400)]
[PATCH] NFS: use a constant value for TCP retransmit timeouts
Implement a best practice: don't use exponential backoff when computing
retransmit timeout values on TCP connections, but simply retransmit
at regular intervals.
This also fixes a bug introduced when xprt_reset_majortimeo() was added.
Test-plan:
Enable RPC debugging and watch timeout behavior on a NFS/TCP mount.
Version: Thu, 11 Aug 2005 16:02:19 -0400
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 11 Aug 2005 20:25:11 +0000 (16:25 -0400)]
[PATCH] RPC: proper soft timeout behavior for rpcbind
Implement a best practice: for soft mounts, an rpcbind timeout should
cause an RPC request to fail.
This also provides an FSM hook for retrying an rpcbind with a different
rpcbind protocol version. We'll use this later to try multiple rpcbind
protocol versions when binding. To enable this, expose the RPC error
code returned during a portmap request to the FSM so it can make some
decision about how to report, retry, or fail the request.
Test-plan:
Hundreds of passes with connectathon NFSv3 locking suite, on the client
and server.
Version: Thu, 11 Aug 2005 16:01:53 -0400
Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Olaf Kirch [Thu, 25 Aug 2005 23:25:35 +0000 (16:25 -0700)]
From: Olaf Kirch <okir@suse.de>
[PATCH] Fix miscompare in __posix_lock_file
If an application requests the same lock twice, the
kernel should just leave the existing lock in place.
Currently, it will install a second lock of the same type.
Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ivan Kokshaysky [Fri, 23 Sep 2005 04:06:31 +0000 (21:06 -0700)]
[PATCH] pci: fixup parent subordinate busnr
I believe the change that broke things is introduction of
pci_fixup_parent_subordinate_busnr().
The patch here does two things:
- hunk #1 should fix the problems you've seen when you boot without
additional "pci" kernel options;
- hunk #2 supposedly fixes boot with "pci=assign-busses" option which
otherwise hangs Acer TM81xx machines as reported.
Please try this with and without "pci=assign-busses". If it boots,
I'd like to see 'lspci -vvx' for both cases.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix to allow SCTP_SHUTDOWN notifications to be received on 1-1 style
SCTP SOCK_STREAM sockets.
Add SCTP_SHUTDOWN notification to the receive queue before updating
the state of the association.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a number of bugs. It cannot be reasonably split up in
multiple fixes, since all bugs interact with each other and affect the same
function:
Bug #1:
The event cache code cannot be called while a lock is held. Therefore, the
call to ip_conntrack_event_cache() within ip_ct_refresh_acct() needs to be
moved outside of the locked section. This fixes a number of 2.6.14-rcX
oops and deadlock reports.
Bug #2:
We used to call ct_add_counters() for unconfirmed connections without
holding a lock. Since the add operations are not atomic, we could race
with another CPU.
Bug #3:
ip_ct_refresh_acct() lost REFRESH events in some cases where refresh
(and the corresponding event) are desired, but no accounting shall be
performed. Both, evenst and accounting implicitly depended on the skb
parameter bein non-null. We now re-introduce a non-accounting
"ip_ct_refresh()" variant to explicitly state the desired behaviour.
Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[NETFILTER] Fix sparse endian warnings in pptp helper
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 23 Sep 2005 06:32:56 +0000 (23:32 -0700)]
[TCP]: Adjust Reno SACK estimate in tcp_fragment
Since the introduction of TSO pcount a year ago, it has been possible
for tcp_fragment() to cause packets_out to decrease. Prior to that,
tcp_retrans_try_collapse() was the only way for that to happen on the
retransmission path.
When this happens with Reno, it is possible for sasked_out to become
invalid because it is only an estimate and not tied to any particular
packet on the retransmission queue.
Therefore we need to adjust sacked_out as well as left_out in the Reno
case. The following patch does exactly that.
This bug is pretty difficult to trigger in practice though since you
need a SACKless peer with a retransmission that occurs just as the
cached MTU value expires.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
I've recently discovered the real functionality of device-mapper snapshots,
and since they are not well known, I've decided to write some docs for
them.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nick Wilson [Fri, 23 Sep 2005 04:44:28 +0000 (21:44 -0700)]
[PATCH] NFS: fix client oops when debugging is on
nfs_readpage_release() causes an oops while accessing a file with NFS
debugging turned on (echo 32767 > /proc/sys/sunrpc/nfs_debug) and a kernel
built with CONFIG_DEBUG_SLAB.
This patch moves the debugging statement above nfs_release_request() to
avoid accessing freed memory.
Signed-off-by: Nick Wilson <njw@osdl.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rob Landley [Fri, 23 Sep 2005 04:44:27 +0000 (21:44 -0700)]
[PATCH] Fix bd_claim() error code.
Problem: In some circumstances, bd_claim() is returning the wrong error
code.
If we try to swapon an unused block device that isn't swap formatted, we
get -EINVAL. But if that same block device is already mounted, we instead
get -EBUSY, even though it still isn't a valid swap device.
This issue came up on the busybox list trying to get the error message
from "swapon -a" right. If a swap device is already enabled, we get -EBUSY,
and we shouldn't report this as an error. But we can't distinguish the two
-EBUSY conditions, which are very different errors.
In the code, bd_claim() returns either 0 or -EBUSY, but in this case busy
means "somebody other than sys_swapon has already claimed this", and
_that_ means this block device can't be a valid swap device. So return
-EINVAL there.
Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: replace printk with "stack-friendly" printf - to report console failure
User get *a lot* confused when consoles don't work but we don't report
anything. And, as reported in the comment, using printk to report "your
console doesn't work" isn't likely to go that far.
Fix the problem on the base of this: stack consumption by host printf(). Use
kernel sprintf() and os_write_file, using a wild guess that one page will be
enough for the message, to preallocate the buffer with kmalloc().
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: use GFP_ATOMIC for allocations under spinlocks.
setup_initial_poll is only called with sigio_lock() held, so use appropriate
allocation.
Also, parse_chan() can also be called when holding a spinlock (see line_open()
-> parse_chan_pair()).
I have sporadic problems (spinlock taken twice, with spinlock debugging on UP)
which could be caused by a sequence like "take spinlock, alloc and go to
sleep, take again the spinlock in the other thread".
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
GFP_ATOMIC | GFP_KERNEL is meaningless and won't work. Actually it never
worked, even in 2.4.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Following i386, we should maybe refuse trying to fault in pages when we're
doing atomic operations, because to handle the fault we could need to take
already taken spinlocks.
Also, if we're doing an atomic operation (in the sense of in_atomic()) we're
surely in kernel mode and we're surely going to handle adequately the failed
fault, so it's safe to behave this way.
Currently, on UML SMP is rarely used, and we don't support PREEMPT, so this is
unlikely to create problems right now, but it might in the future.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: run mconsole "sysrq" in process context
Things are breaking horribly with sysrq called in interrupt context. I want
to try to fix it, but probably this is simpler. To tell the truth, sysrq is
normally run in interrupt context, so there shouldn't be any problem.
There's also a warning from the fault handler because it's run in atomic
context (I have a patch for that, only I deferred it). This is why I'm doing
this.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avoid setting w = 0 twice. Spotted this (trivial) thing which is needed for
another patch.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The current code doesn't handle well general protection faults on the host -
it thinks that cr2 is always the address of a page fault. While actually, on
general protection faults, that address is not accessible, so we'd better
assume we couldn't satisfy the fault. Currently instead we think we've fixed
it, so we go back, retry the instruction and fault again endlessly.
This leads to the kernel hanging when doing copy_from_user(dest, -1, ...) in
TT mode, since reading *(-1) causes a GFP, and we don't support kernel
preemption.
Thanks to Luo Xin for testing UML with LTP and reporting the failures he got.
Cc: Luo Xin <luothing@sina.com> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: don't redundantly mark pte as newpage in pte_modify
pte_modify marks a page as needing flush, which is redundant because the
resulting PTE is still set with set_pte, which already handles that.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Simplify the code by using strlcat() instead of strncat() and manual
appending.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: don't remove umid files in conflict case
Only remove the UML pidfile and management socket if we created them.
Currently in case two UMLs are started with the same umid, the second will
remove the first's ones.
Probably we should also panic() at that point, not sure however.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] __kmalloc: Generate BUG if size requested is too large.
I had an issue on ia64 where I got a bug in kernel/workqueue because
kzalloc returned a NULL pointer due to the task structure getting too big
for the slab allocator. Usually these cases are caught by the kmalloc
macro in include/linux/slab.h.
Compilation will fail if a too big value is passed to kmalloc.
However, kzalloc uses __kmalloc which has no check for that. This patch
makes __kmalloc bug if a too large entity is requested.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The PowerMac mesh SCSI driver had some missing error handling which would
trigger warnings due to lack of handling of return value from
scsi_add_host. This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The SMU is the "system controller" chip used by Apple recent G5 machines
including the iMac G5. It drives things like fans, i2c busses, real time
clock, etc...
The current kernel contains a very crude driver that doesn't do much more
than reading the real time clock synchronously. This is a completely
rewritten driver that provides interrupt based command queuing, a userland
interface, and an i2c/smbus driver for accessing the devices hanging off
the SMU i2c busses like temperature sensors. This driver is a basic block
for upcoming work on thermal control for those machines, among others.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Anton Blanchard [Fri, 23 Sep 2005 04:44:04 +0000 (21:44 -0700)]
[PATCH] ppc64: Fix LPAR regression
The recent iommu fix broke booting on some POWER4 and POWER5 LPAR boxes.
It looks like we have been calling the non LPAR iommu_dev_setup on LPAR
machines for a while. The recent iommu fix caused that code path to
fail.
It looks like we just need to hook up the devices iommu_table to the
parents one, so do that instead of calling iommu_dev_setup_pSeries and
crossing the streams.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] slab: fix handling of pages from foreign NUMA nodes
The numa slab allocator may allocate pages from foreign nodes onto the
lists for a particular node if a node runs out of memory. Inspecting the
slab->nodeid field will not reflect that the page is now in use for the
slabs of another node.
This patch fixes that issue by adding a node field to free_block so that
the caller can indicate which node currently uses a slab.
Also removes the check for the current node from kmalloc_cache_node since
the process may shift later to another node which may lead to an allocation
on another node than intended.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] swsusp: do not trigger BUG_ON() if there is not enough memory
The following patch makes swsusp avoid triggering the BUG_ON() in
swsusp_suspend() if there is not enough memory for suspend.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The address passed to io_remap_pfn_range() in hpet_mmap() does not need to
be converted using __pa(): it is already a physical address. This bug was
found and the patch suggested by Clay Harris.
I introduced this particular bug when making io_remap_pfn_range changes a
few months ago. In fact mmap()ing /dev/hpet has *never* previously worked:
before my changes __pa() was being executed on an ioremap()ed virtual
address, which is also invalid.
Signed-off-by: Keir Fraser <keir@xensource.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ivan Kokshaysky [Fri, 23 Sep 2005 04:43:58 +0000 (21:43 -0700)]
[PATCH] slab: alpha inlining fix
It is essential that index_of() be inlined. But alpha undoes the gcc
inlining hackery and index_of() ends up out-of-line. So fiddle with things
to make that function inline again.
Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Current -git tree doesn't build when enabling oprofile on a non-bookE CPU
(like on a PowerMac for example). While there is no performance counter
support for these CPUs implemented yet, it's still nice to be able to use
the timer based sampling, and that got broken.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Grant Coady [Fri, 23 Sep 2005 04:43:54 +0000 (21:43 -0700)]
[PATCH] DEBUG redefined in drivers/mtd/devices/docecc.c
Fix namespace clash:
drivers/mtd/devices/docecc.c:43:1: warning: "DEBUG" redefined
In file included from drivers/mtd/devices/docecc.c:40:
include/linux/mtd/mtd.h:219:1: warning: this is the location of the previous definition
Signed-off-by: Grant Coady <gcoady@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] v9fs: don't free root dentry & inode if error occurs in v9fs_get_sb
If error occurs while in v9fs_get_sb after it calles sget, the dentry object
of the root and its inode may be freed twice -- once while handling the error
in v9fs_get_sb, and second time when v9fs_get_sb calles deactivate_super
(which in turn calls v9fs_kill_super)
The patch removes the unnecessary code that frees the root dentry and its
inode.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] v9fs: replace strlen on newly allocated by __getname buffers to PATH_MAX
v9fs_vfs_readlink allocates space for the link using __getname and
errorneously uses strlen on the newly allocated buffer to check if the buffer
passed by the user is bigger than the one returned by __getname.
The patch replaces the strlen usage to PATH_MAX, which is the actual size of
the buffers returned by __getname.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] v9fs: make copy of the transport prototype instead of using it directly
When a new session is created it uses a template object of the specified
transport type to instantiate its own copy. The code for the making a copy of
the template object was lost, and the object itself is attached to the v9fs
session. This leads to many sessions using the same transport instead of
having their own copy.
The patch puts back the code that makes a copy of the template object.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] v9fs: allocate the Rwalk qid array from the right conv buffer
When v9fs_deserealize_fcall deserializes a Rwalk message, it incorrectly
allocates space for the qid array in the source instead of the destination
buffer.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] v9fs: make conv functions to check for conv buffer overflow
buf_check_size function checks if the conv buffer has enough space for the
performed operation, but it doesn't return the result back to the calling
function, only logs an error in the log.
The report-back-error functionality was lost when buf_check_size was
converted from macro to inline function. The return in the macro used to
exit from the functions that include it, after the conversion it just exits
from the inline function itself.
The patch makes buf_check_size to return flag and all functions that use
it check if they should perform the operation, or exit.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] suspend: cleanup calling of power off methods.
In the lead up to 2.6.13 I fixed a large number of reboot problems by
making the calling conventions consistent. Despite checking and double
checking my work it appears I missed an obvious one.
The S4 suspend code for PM_DISK_PLATFORM was also calling device_shutdown
without setting system_state, and was not calling the appropriate
reboot_notifier.
This patch fixes the bug by replacing the call of device_suspend with
kernel_poweroff_prepare.
Various forms of this failure have been fixed and tracked for a while.
Thanks for tracking this down go to: Alexey Starikovskiy, Meelis Roos
<mroos@linux.ee>, Nigel Cunningham <ncunningham@cyclades.com>, Pierre
Ossman <drzeus-list@drzeus.cx>
History of this bug is at:
http://bugme.osdl.org/show_bug.cgi?id=4320
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] reboot: comment and factor the main reboot functions
In the lead up to 2.6.13 I fixed a large number of reboot problems by
making the calling conventions consistent. Despite checking and double
checking my work it appears I missed an obvious one.
This first patch simply refactors the reboot routines so all of the
preparation for various kinds of reboots are in their own functions.
Making it very hard to get the various kinds of reboot out of sync.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Keith Owens [Thu, 22 Sep 2005 08:49:15 +0000 (18:49 +1000)]
[IA64] Wire in the MCA/INIT handler stacks
Wire the MCA/INIT handler stacks into DTR[2] and track them in
IA64_KR(CURRENT_STACK). This gives the MCA/INIT handler stacks the
same TLB status as normal kernel stacks. Reload the old CURRENT_STACK
data on return from OS to SAL.
Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Kumar Gala [Thu, 22 Sep 2005 04:54:58 +0000 (23:54 -0500)]
[PATCH] ppc32: Fix configuration of PCI IO space on MPC85xx platform
For platforms that don't have PCI IO at 0 the outbound window
registers were not being properly configured.
Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pete Zaitcev [Thu, 22 Sep 2005 07:49:45 +0000 (00:49 -0700)]
[PATCH] ub: Comment out unconditional stall clear
This code appears to be more trouble than it's worth, considering that
no normal users reload drivers. So, we comment it for now. It is not
removed outright for the benefit of hackers (that is, myself).
David Hollis [Thu, 22 Sep 2005 07:49:39 +0000 (00:49 -0700)]
[PATCH] USB: Add Novatel CDMA Wireless PC card IDs to airprime
USB: Add device id's for Novatel Wireless CDMA wireless PC card.
The Novatel CDMA card behaves the same as the AirPrime by providing
a USB serial port.
projects / linux-2.6 / log