Stefan Richter [Sat, 16 Aug 2008 11:36:47 +0000 (13:36 +0200)]
ieee1394: regression in 2.6.25: updates should happen before probes
Regression since commit 73cf60232ef16e1f8a64defa97214a1722db1e6c,
"ieee1394: use class iteration api": The two loops for (1.) driver
updates and (2.) driver probes were replaced by a single loop with
bogus needs_probe checks. Hence updates and probes were now intermixed,
and especially sbp2 updates (reconnects) held up longer than necessary.
While we fix it, change the needs_probe flag to bool type for clarity.
Tested by Damien Benoist.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Linus Torvalds [Tue, 19 Aug 2008 00:43:21 +0000 (17:43 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] use generic compat_old_sys_readdir
[IA64] pci_acpi_scan_root cleanup
[IA64] Shrink shadow_flush_counts to a short array to save 8k of per_cpu area.
[IA64] Remove sn2_defconfig.
Switch ia64 to the generic compat_sys_old_readdir which is identical
except for slightly better error handling. Also remove sys32_getdents
which already isn't wired up to the syscall table anymore in favour of
compat_sys_getdents.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
Luck, Tony [Fri, 15 Aug 2008 22:37:48 +0000 (15:37 -0700)]
[IA64] pci_acpi_scan_root cleanup
The code walks all the acpi _CRS methods to see how many windows
to allocate. It then scans them all again to insert_resource()
for each *even if the first scan found that there were none*.
Move the second scan inside the "if (windows)" clause.
Robin Holt [Fri, 15 Aug 2008 14:21:24 +0000 (09:21 -0500)]
[IA64] Shrink shadow_flush_counts to a short array to save 8k of per_cpu area.
Making allmodconfig will break the current build. This patch shrinks
the per_cpu__shadow_flush_counts from 16k to 8k which frees enough space
to allow allmodconfig to successfully complete.
Robin Holt [Fri, 15 Aug 2008 09:56:01 +0000 (04:56 -0500)]
[IA64] Remove sn2_defconfig.
Not really a patch as much as a remove this file request. Now that
generic_defconfig supports all the configurations SGI currently supports
and has NR_CPUS and NR_NODES at our largest configurations, we have no
reason to maintain the extra defconfig file.
Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Add missing ATA_ID_* defines and update {ata,atapi}_*()
inlines accordingly. The currently unused defines are
needed for the forthcoming drivers/ide/ changes.
v2:
Add ATA_ID_SPG.
Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
sgiioc4: fixup message on resource allocation failure
There can be more than one sgiioc4 card in the system so print
also PCI device name on resource allocation failure (so we know
which one is the problematic one).
Reported-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This patch should fix TOC handling for cdroms that can not play audio. It
extends commit af744e3294d09d706c4eae26cffaaa68a8d40337 ("cdrom: don't
check CDC_PLAY_AUDIO in cdrom_count_tracks()") with a safety check and
non-audio ioctls support.
Since CDC_PLAY_AUDIO flag was used not only to check ability to play audio
but also to ensure that audio_ioctl was not NULL, all TOC-related
operations had to use it.
As far as I understand, now audio_ioctl is never NULL, so a sanity check
during device registration should be sufficient.
It was tested on Optiarc AD7203A device, that has no ability to play
audio.
Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[bart: remove now unneeded ->audio_ioctl check (noticed by Borislav)] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Borislav Petkov [Mon, 18 Aug 2008 19:40:04 +0000 (21:40 +0200)]
gdrom: add dummy audio_ioctl handler
Make sure audio_ioctl is always defined even if being a dummy function
since the cdrom_ioctl interface assumes its existence and we don't
want to BUG on null ptr on some ioctls like, e.g. CDROMREADTOCENTRY,
CDROMREADTOCHDR etc. when we fix CDC_PLAY_AUDIO checking in cdrom.c.
Borislav Petkov [Mon, 18 Aug 2008 19:40:03 +0000 (21:40 +0200)]
viocd: add dummy audio ioctl handler
Make sure audio_ioctl is always defined even if being a dummy function
since the cdrom_ioctl interface assumes its existence and we don't
want to BUG on null ptr on some ioctls like, e.g. CDROMREADTOCENTRY,
CDROMREADTOCHDR etc. when we fix CDC_PLAY_AUDIO checking in cdrom.c.
Adrian Bunk [Mon, 18 Aug 2008 19:40:03 +0000 (21:40 +0200)]
drivers/ide/pci/: use __devexit_p()
This patch adds missing __devexit_p's.
Reported-by: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Linus Torvalds [Mon, 18 Aug 2008 19:05:01 +0000 (12:05 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
powerpc: Use generic compat_sys_old_readdir
powerpc/kexec: Fix up KEXEC_CONTROL_CODE_SIZE missed during conversion
powerpc: Remove dead module_find_bug code
powerpc: Add CMO enabled flag and paging space data to lparcfg
powerpc: Fix CMM page loaning on 64k page kernel with 4k hardware pages
powerpc: Make CMO paging space pool ID and page size available
powerpc: Fix lockdep IRQ tracing bug
powerpc: Fix TLB invalidation on boot on 32-bit
powerpc: Fix loss of vdso on fork on 32-bit
Since f82b217e3513fe3af342c0f3ee1494e86250c21c lockdep can output spurious
warnings related to hwirqs due to hardirq_off shrinkage from int to bit-sized
flag. Guard it with double negation to fix the warning.
x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant
caused these new warnings during a normal build:
In file included from linux-2.6/arch/x86/boot/memory.c:17:
linux-2.6/include/linux/log2.h: In function '__ilog2_u32':
linux-2.6/include/linux/log2.h:34: warning: implicit declaration of function 'fls'
linux-2.6/include/linux/log2.h: In function '__ilog2_u64':
linux-2.6/include/linux/log2.h:42: warning: implicit declaration of function 'fls64'
linux-2.6/include/linux/log2.h: In function '__roundup_pow_of_two ':
linux-2.6/include/linux/log2.h:63: warning: implicit declaration of function 'fls_long'
I tried to fix them in log2.h, but it's difficult because the real mode
environment is completely different from a normal kernel environment. Instead
define an own ARRAY_SIZE macro in boot.h, similar to the other private
macros there.
WARNING: vmlinux.o(.text+0x27032): Section mismatch in reference from the function get_tce_space_from_tar() to the function .init.text:calgary_bus_has_devices()
The function get_tce_space_from_tar() references
the function __init calgary_bus_has_devices().
This is often because get_tce_space_from_tar lacks a __init
annotation or the annotation of calgary_bus_has_devices is wrong.
get_tce_space_from_tar is called only from __init function (calgary_init)
and calls __init function (calgary_bus_has_devices).
So annotate it properly.
Take out part of get_local_pda referencing __init function (free_bootmem)
to new (static) function marked as __ref. It's safe to do because free_bootmem
is called before __init sections are dropped.
WARNING: vmlinux.o(.cpuinit.text+0x3cd7): Section mismatch in reference from the function get_local_pda() to the function .init.text:free_bootmem()
The function __cpuinit get_local_pda() references
a function __init free_bootmem().
If free_bootmem is only used by get_local_pda then
annotate free_bootmem with a matching annotation.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
As these variables are NULL'ed before __init sections are dropped
(in setup_per_cpu_maps), they can be safely annotated as __ref.
This change silences following section mismatch warnings:
WARNING: vmlinux.o(.data+0x46c0): Section mismatch in reference from the variable x86_cpu_to_apicid_early_ptr to the variable .init.data:x86_cpu_to_apicid_early_map
The variable x86_cpu_to_apicid_early_ptr references
the variable __initdata x86_cpu_to_apicid_early_map
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x46c8): Section mismatch in reference from the variable x86_bios_cpu_apicid_early_ptr to the variable .init.data:x86_bios_cpu_apicid_early_map
The variable x86_bios_cpu_apicid_early_ptr references
the variable __initdata x86_bios_cpu_apicid_early_map
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x46d0): Section mismatch in reference from the variable x86_cpu_to_node_map_early_ptr to the variable .init.data:x86_cpu_to_node_map_early_map
The variable x86_cpu_to_node_map_early_ptr references
the variable __initdata x86_cpu_to_node_map_early_map
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Fries [Mon, 18 Aug 2008 04:03:40 +0000 (23:03 -0500)]
x86: fix i486 suspend to disk CR4 oops
arch/x86/power/cpu_32.c __save_processor_state calls read_cr4()
only a i486 CPU doesn't have the CR4 register. Trying to read it
produces an invalid opcode oops during suspend to disk.
Use the safe rc4 reading op instead. If the value to be written is
zero the write is skipped.
arch/x86/power/hibernate_asm_32.S
done: swapped the use of %eax and %ecx to use jecxz for
the zero test and jump over store to %cr4.
restore_image: s/%ecx/%eax/ to be consistent with done:
In addition to __save_processor_state, acpi_save_state_mem,
efi_call_phys_prelog, and efi_call_phys_epilog had checks added
(acpi restore was in assembly and already had a check for
non-zero). There were other reads and writes of CR4, but MCE and
virtualization shouldn't be executed on a i486 anyway.
Signed-off-by: David Fries <david@fries.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Marcin Slusarz [Sun, 10 Aug 2008 22:09:38 +0000 (00:09 +0200)]
x86: mpparse.c: fix section mismatch warning
WARNING: vmlinux.o(.text+0x118f7): Section mismatch in reference from the function construct_ioapic_table() to the function .init.text:MP_bus_info()
The function construct_ioapic_table() references
the function __init MP_bus_info().
This is often because construct_ioapic_table lacks a __init
annotation or the annotation of MP_bus_info is wrong.
construct_ioapic_table is called only from construct_default_ISA_mptable which is __init
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Marcin Slusarz [Sun, 10 Aug 2008 22:11:13 +0000 (00:11 +0200)]
x86: mmconf: fix section mismatch warning
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x1591): Section mismatch in reference from the function init_amd() to the function .init.text:check_enable_amd_mmconf_dmi()
The function __cpuinit init_amd() references
a function __init check_enable_amd_mmconf_dmi().
If check_enable_amd_mmconf_dmi is only used by init_amd then
annotate check_enable_amd_mmconf_dmi with a matching annotation.
check_enable_amd_mmconf_dmi is only called from init_amd which is __cpuinit
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x1fe7): Section mismatch in reference from the function MP_processor_info() to the variable .init.data:x86_quirks
The function __cpuinit MP_processor_info() references
a variable __initdata x86_quirks.
If x86_quirks is only used by MP_processor_info then
annotate x86_quirks with a matching annotation.
MP_processor_info uses x86_quirks which is __init and is used only from
smp_read_mpc and construct_default_ISA_mptable which are __init
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Marcin Slusarz [Sun, 10 Aug 2008 22:07:44 +0000 (00:07 +0200)]
x86, tsc: fix section mismatch warning
WARNING: vmlinux.o(.text+0x7950): Section mismatch in reference from the function native_calibrate_tsc() to the function .init.text:tsc_read_refs()
The function native_calibrate_tsc() references
the function __init tsc_read_refs().
This is often because native_calibrate_tsc lacks a __init
annotation or the annotation of tsc_read_refs is wrong.
tsc_read_refs is called from native_calibrate_tsc which is not __init
and native_calibrate_tsc cannot be marked __init
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: correct register constraints for 64-bit atomic operations
x86_64 add/sub atomic ops does not seems to accept integer values bigger
than 32 bits as immediates. Intel's add/sub documentation specifies they
have to be passed as registers.
The only operations in the x86-64 architecture which accept arbitrary
64-bit immediates is "movq" to any register; similarly, the only
operation which accept arbitrary 64-bit displacement is "movabs" to or
from al/ax/eax/rax.
e
32-bit signed integer constant, or a symbolic reference known to fit
that range (for immediate operands in sign-extending x86-64
instructions).
Z
32-bit unsigned integer constant, or a symbolic reference known to
fit that range (for immediate operands in zero-extending x86-64
instructions).
Since add/sub does sign extension, using the "e" constraint seems appropriate.
It applies to 2.6.27-rc, 2.6.26, 2.6.25...
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steven Rostedt [Sat, 16 Aug 2008 03:56:44 +0000 (13:56 +1000)]
powerpc: Remove dead module_find_bug code
Doing some various "make randconfig", I came across an error when
CONFIG_BUG was not set:
arch/powerpc/kernel/module.c: In function 'module_find_bug':
arch/powerpc/kernel/module.c:111: error: increment of pointer to unknown structure
arch/powerpc/kernel/module.c:111: error: arithmetic on pointer to an incomplete type
arch/powerpc/kernel/module.c:112: error: dereferencing pointer to incomplete type
Looking further into this, I found that module_find_bug, defined in
powerpc arch code, is not called anywhere, so this just removes it.
There is a static module_find_bug in lib/bug.c but that is a separate issue.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Robert Jennings [Fri, 15 Aug 2008 19:10:18 +0000 (05:10 +1000)]
powerpc: Add CMO enabled flag and paging space data to lparcfg
Add a field in lparcfg output to indicate whether the kernel is
running on a dedicated or shared memory lpar. Added fields to show
the paging space pool IDs and the CMO page size.
Submitted-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Brian King [Fri, 15 Aug 2008 19:09:33 +0000 (05:09 +1000)]
powerpc: Fix CMM page loaning on 64k page kernel with 4k hardware pages
If the firmware page size used for collaborative memory overcommit
is 4k, but the kernel is using 64k pages, the page loaning is currently
broken as it only marks the first 4k page of each 64k page as loaned.
This fixes this to iterate through each 4k page and mark them all as
loaned/active.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Robert Jennings [Fri, 15 Aug 2008 19:07:31 +0000 (05:07 +1000)]
powerpc: Make CMO paging space pool ID and page size available
During platform setup, save off the primary/secondary paging space
pool IDs and the page size. Added accessors in hvcall.h for these
variables. This is needed for a subsequent fix.
Submitted-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
A small bogon sneaked into the ppc64 lockdep support. A test is
branching slightly off causing a clobbered register value to
overwrite the irq state under some circumstances.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Rocky Craig [Thu, 14 Aug 2008 13:11:54 +0000 (23:11 +1000)]
powerpc: Fix TLB invalidation on boot on 32-bit
The intent of "flush_tlbs" is to invalidate all TLB entries by doing a
TLB invalidate instruction for all pages in the address range 0 to
0x00400000. A loop counter is set up at the high value and
decremented by page size. However, the loop is only done once as the
sense of the conditional branch at the loop end does not match the
setup/decrement. This fixes it to do the whole range by correcting
the branch condition.
Signed-off-by: Rocky Craig <rocky.craig@hp.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
When we fork, init_new_context() improperly resets the vdso_base
of the new context to 0. That means that the new process loses
access to the vdso for signal trampolines.
The initialization should be unnecessary anyway as the context
on a fresh mm should be 0 in the first place and binfmt_elf
will initialize that value for a newly loaded process.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Ben Dooks [Tue, 12 Aug 2008 08:24:50 +0000 (09:24 +0100)]
s3cmci: attach get_cd host ops
Attach the routine to get_cd to allow the MMC core to find out whether
there is a card present or not without the tedious process of trying to
send commands to the card or not.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Ben Dooks [Fri, 8 Aug 2008 09:55:41 +0000 (10:55 +0100)]
s3cmci: fix sparse errors from non-exported functions
Fix the following sparse errors by making the functions
static and fixing the check for host->base.
598:6: warning: symbol 's3cmci_dma_done_callback' was not declared. Should it be static?
744:6: warning: symbol 's3cmci_dma_setup' was not declared. Should it be static?
1209:20: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
include/linux/security.h: In function 'security_ptrace_traceme':
include/linux/security.h:1760: error: 'parent' undeclared (first use in this function)
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: James Morris <jmorris@namei.org>
Takashi Iwai [Fri, 15 Aug 2008 14:46:42 +0000 (16:46 +0200)]
ALSA: hda - Fix capture source widgets on ALC codecs
On some Realtek codecs like ALC882 or ALC883, the capture source is
no mux but sum widget. We have to initialize all channels properly
for this type, otherwise noises may come in from the unused route.
The patch assures to mute unused routes, and unmute the currently
selected route.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Huang Weiyi [Sat, 16 Aug 2008 23:51:05 +0000 (07:51 +0800)]
removed unused #include <version.h>
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
drivers/char/pcmcia/ipwireless/tty.c
drivers/char/synclink_gt.c
drivers/char/xilinx_hwicap/xilinx_hwicap.c
Linus Torvalds [Sun, 17 Aug 2008 00:16:07 +0000 (17:16 -0700)]
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: fix build if CONFIG_PROVE_LOCKING not defined
lockdep: use WARN() in kernel/lockdep.c
lockdep: spin_lock_nest_lock(), checkpatch fixes
lockdep: build fix
Linus Torvalds [Sun, 17 Aug 2008 00:15:32 +0000 (17:15 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: scale sysctl_sched_shares_ratelimit with nr_cpus
sched: fix rt-bandwidth hotplug race
sched: fix the race between walk_tg_tree and sched_create_group
Linus Torvalds [Sun, 17 Aug 2008 00:14:07 +0000 (17:14 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
x86: add MAP_STACK mmap flag
x86: fix section mismatch warning - spp_getpage()
x86: change init_gdt to update the gdt via write_gdt, rather than a direct write.
x86-64: fix overlap of modules and fixmap areas
x86, geode-mfgpt: check IRQ before using MFGPT as clocksource
x86, acpi: cleanup, temp_stack is used only when CONFIG_SMP is set
x86: fix spin_is_contended()
x86, nmi: clean UP NMI watchdog failure message
x86, NMI: fix watchdog failure message
x86: fix /proc/meminfo DirectMap
x86: fix readb() et al compile error with gcc-3.2.3
arch/x86/Kconfig: clean up, experimental adjustement
x86: invalidate caches before going into suspend
x86, perfctr: don't use CCCR_OVF_PMI1 on Pentium 4Ds
x86, AMD IOMMU: initialize dma_ops after sysfs registration
x86m AMD IOMMU: cleanup: replace LOW_U32 macro with generic lower_32_bits
x86, AMD IOMMU: initialize device table properly
x86, AMD IOMMU: use status bit instead of memory write-back for completion wait
x86: silence mmconfig printk
x86, msr: fix NULL pointer deref due to msr_open on nonexistent CPUs
...
Linus Torvalds [Sat, 16 Aug 2008 23:48:45 +0000 (16:48 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits)
[ARM] 5191/1: ARM: remove CVS keywords
[ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified
[ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16
[ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD
[ARM] 5198/1: PalmTX: PCMCIA fixes
[ARM] Fix a pile of broken watchdog drivers
[ARM] update mach-types
[ARM] 5196/1: fix inline asm constraints for preload
[ARM] 5194/1: update .gitignore
[ARM] add proc-macros.S include to proc-arm940 and proc-arm946
[ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags
[ARM] 5193/1: Wire up missing syscalls
[ARM] traps: don't call undef hook functions with spinlock held
[ARM] 5183/2: Provide Poodle LoCoMo GPIO names
[ARM] dma-mapping: provide sync_range APIs
[ARM] dma-mapping: improve type-safeness of DMA translations
[ARM] Kirkwood: instantiate the orion_spi driver in the platform code
[ARM] prevent crashing when too much RAM installed
[ARM] Kirkwood: Instantiate mv_xor driver
[ARM] Orion: Instantiate mv_xor driver for 5182
...
David Woodhouse [Sat, 16 Aug 2008 10:55:04 +0000 (11:55 +0100)]
Fix header export of videodev2.h, ivtv.h, ivtvfb.h
The exported copy of videodev2.h contains this line:
#define #include <sys/time.h>
This is because for some reason it defines __user for itself -- despite
the fact that we remove all instances of __user when exporting headers.
_All_ pointers in userspace are user pointers. Fix it by removing the
unnecessary '#define __user' from the file.
The new headers ivtv.h and ivtvfb.h would have the same problem... if
whoever put them there had actually remembered to add them to the Kbuild
file while he was at it. Fix those too, and export them as was
presumably intended.
Note that includes of <linux/compiler.h> are also stripped by the header
export process, so those don't need to be conditional.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Miao [Sat, 16 Aug 2008 07:50:51 +0000 (03:50 -0400)]
[ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified
The newly introduced "lcd_conn" field for connected LCD panel type will
cause the original code to generate the warnings of incorrect lccr*.
This is unnecessary since well encoded LCD_* flags will not generate
incorrect combinition of lccr* bits. Skip the check if "lcd_conn" is
specified.
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Eric Miao [Sat, 16 Aug 2008 07:59:11 +0000 (03:59 -0400)]
[ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD
Signed-off-by: Eric Miao <eric.miao@marvell.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Alex Osborne <ato@meshy.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adrian Bunk [Sun, 10 Aug 2008 11:33:08 +0000 (12:33 +0100)]
[ARM] Fix a pile of broken watchdog drivers
These patches from Adrian fix:
- ixp4xx_wdt: 20d35f3e50ea7e573f9568b9fce4e98523aaee5d
CC drivers/watchdog/ixp4xx_wdt.o
ixp4xx_wdt.c:32: error: expected '=', ',', ';', 'asm' or '__attribute__'
ixp4xx_wdt.c: In function 'wdt_enable':
ixp4xx_wdt.c:41: error: 'wdt_lock' undeclared (first use in this
ixp4xx_wdt.c:41: error: (Each undeclared identifier is reported only
ixp4xx_wdt.c:41: error: for each function it appears in.)
ixp4xx_wdt.c: In function 'wdt_disable':
ixp4xx_wdt.c:52: error: 'wdt_lock' undeclared (first use in this
ixp4xx_wdt.c: In function 'ixp4xx_wdt_init':
ixp4xx_wdt.c:186: error: 'wdt_lock' undeclared (first use in this
make[3]: *** [drivers/watchdog/ixp4xx_wdt.o] Error 1
- at91rm9200_wdt: 2760600da2a13d5a2a335ba012d0f3ad5df4c098
CC drivers/watchdog/at91rm9200_wdt.o
at91rm9200_wdt.c:188: error: 'at91_wdt_ioctl' undeclared here (not in a
make[3]: *** [drivers/watchdog/at91rm9200_wdt.o] Error 1
- wdt285: d0e58eed05f9baf77c4f75e794ae245f6dae240a
CC [M] drivers/watchdog/wdt285.o
wdt285.c: In function 'footbridge_watchdog_init':
wdt285.c:211: error: 'KERN_WARN' undeclared (first use in this function)
wdt285.c:211: error: (Each undeclared identifier is reported only once
wdt285.c:211: error: for each function it appears in.)
wdt285.c:212: error: expected ')' before string constant
make[3]: *** [drivers/watchdog/wdt285.o] Error 1
And this patch from rmk:
- s3c2410_wdt: 41dc8b72e37c514f7332cbc3f3dd864910c2a1fa
CC drivers/watchdog/s3c2410_wdt.o
s3c2410_wdt.c: In function `s3c2410wdt_start':
s3c2410_wdt.c:161: warning: `return' with a value, in function returning void
Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nicolas Pitre [Tue, 12 Aug 2008 21:10:59 +0000 (22:10 +0100)]
[ARM] 5196/1: fix inline asm constraints for preload
With gcc 4.3 and later, a pointer that has already been dereferenced is
assumed not to be null since it should have caused a segmentation fault
otherwise, hence any subsequent test against NULL is optimized away.
Current inline asm constraint used in the implementation of prefetch()
makes gcc believe that the pointer is dereferenced even though the PLD
instruction does not load any data and does not cause a segmentation
fault on null pointers, which causes all sorts of interesting results
when reaching the end of a linked lists for example.
Let's use a better constraint to properly represent the actual usage of
the pointer value.
Problem reported by Chris Steel.
Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
David S. Miller [Sat, 16 Aug 2008 02:57:57 +0000 (19:57 -0700)]
lmb: Fix reserved region handling in lmb_enforce_memory_limit().
The idea of the implementation of this fix is from Michael Ellerman.
This function has two loops, but they each interpret the memory_limit
value differently. The first loop interprets it as a "size limit"
whereas the second loop interprets it as an "address limit".
Before the second loop runs, reset memory_limit to lmb_end_of_DRAM()
so that it all works out.
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Michael Ellerman <michael@ellerman.id.au>
Linus Torvalds [Fri, 15 Aug 2008 22:31:23 +0000 (15:31 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (33 commits)
Blackfin arch: hook up some missing new system calls
Blackfin arch: fix missing digit in SCLK range checking
Blackfin arch: do not muck with the UART during boot -- let the serial driver worry about it
Blackfin arch: clear EMAC_SYSTAT during IRQ init rather than early head.S as we dont need it setup that early
Blackfin arch: use %pF when printing out the double fault address so we get symbol names
Blackfin arch: add support for the BlackStamp board
Blackfin arch: Allow ins functions to have a low latency version
Blackfin arch: Print out doublefault addresses, so debug can occur
Blackfin arch: shuffle related prototypes together -- no functional changes
Blackfin arch: move fixed code defines into fixed_code.h as very few things actually need to know these details
Blackfin arch: mark some functions as __init as they are only called from __init functions
Blackfin arch: delete dead prototypes
Blackfin arch: cleanup cache lock code
Blackfin arch: workaround SIC_IWR1 reset bug, by keeping MDMA0/1 always enabled in SIC_IWR1.
Blackfin arch: Fix bug - when expanding the trace buffer, it does not print out the decoded instruction.
Blackfin arch: Fix Bug - System with EMAC driver enabled - Core not idling
Blackfin arch: delete unused cache functions
Blackfin arch: convert L2 defines to be the same as the L1 defines
Blackfin arch: unify the duplicated portions of __start and split mach-specific pieces into _mach_early_start where they will be easier to trim over time
Blackfin arch: add asm/thread_info.h for THREAD_SIZE define
...
Linus Torvalds [Fri, 15 Aug 2008 19:47:16 +0000 (12:47 -0700)]
Merge branch 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6
* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6:
cpuidle: Make ladder governor honor latency requirements fully
cpuidle: Menu governor fix wrong usage of measured_us
cpuidle: Do not use poll_idle unless user asks for it
x86: Fix ioremap off by one BUG
cpuidle: Make ladder governor honor latency requirements fully
ladder governor only honored latency requirement when promoting C-states.
Instead. it should check for latency requirement on each idle call,
and demote to appropriate C-state when there is a latency requirement change.
cpuidle: Do not use poll_idle unless user asks for it
poll_idle was added to CPUIDLE, just as a low latency idle handler, to be
used in cases when user desires CPUs not to enter any idle state at all. It
was supposed to be a run time idle=poll option to the user. But, it was indeed
getting used during normal menu and ladder governor default case, with no
special user setting (Reported by Linus Torvalds).
Change below ensures that poll_idle will not be used unless user explicitly
asks pm_qos infrastructure for zero latency requirement.
Jean Delvare [Fri, 15 Aug 2008 08:58:05 +0000 (10:58 +0200)]
hwmon-vid: Fix AMD K8 VID decoding
Not all AMD K8 have 6 VID pins, contrary to what was assumed in
commit 116d0486bdefc11f71e567cadf0c47f788b4dd06. This commit broke
support of older CPU models which have only 5 VID pins:
http://bugzilla.kernel.org/show_bug.cgi?id=11329
We need two entries in the hwmon-vid table, one for 5-bit VID models
(K8 revision <= E) and one for 6-bit VID models (K8 revision >= F).
This fixes bug #11329.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Frank Myhr <fmyhr@fhmtech.com> Tested-by: Jean-Luc Coulon <jean.luc.coulon@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Wed, 13 Aug 2008 16:02:18 +0000 (18:02 +0200)]
x86: add MAP_STACK mmap flag
as per this discussion:
http://lkml.org/lkml/2008/8/12/423
Pardo reported that 64-bit threaded apps, if their stacks exceed the
combined size of ~4GB, slow down drastically in pthread_create() - because
glibc uses MAP_32BIT to allocate the stacks. The use of MAP_32BIT is
a legacy hack - to speed up context switching on certain early model
64-bit P4 CPUs.
So introduce a new flag to be used by glibc instead, to not constrain
64-bit apps like this.
glibc can switch to this new flag straight away - it will be ignored
by the kernel. If those old CPUs ever matter to anyone, support for
it can be implemented.
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] mount of IPC$ breaks with iget patch
[CIFS] remove trailing whitespace
[CIFS] if get root inode fails during mount, cleanup tree connection
Alan Cox [Fri, 15 Aug 2008 09:39:38 +0000 (10:39 +0100)]
tty: remove resize window special case
This moves it to being a tty operation. That removes special cases and now
also means that resize can be picked up by um and other non vt consoles
which may have a resize operation.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 15 Aug 2008 17:33:07 +0000 (10:33 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6
* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6: (29 commits)
UBIFS: xattr bugfixes
UBIFS: remove unneeded check
UBIFS: few commentary fixes
UBIFS: fix budgeting request alignment in xattr code
UBIFS: improve arguments checking in debugging messages
UBIFS: always set i_generation to 0
UBIFS: correct spelling of "thrice".
UBIFS: support splice_write
UBIFS: minor tweaks in commit
UBIFS: reserve more space for index
UBIFS: print pid in dump function
UBIFS: align inode data to eight
UBIFS: improve budgeting checks
UBIFS: correct orphan deletion order
UBIFS: fix typos in comments
UBIFS: do not union creat_sqnum and del_cmtno
UBIFS: optimize deletions
UBIFS: increment commit number earlier
UBIFS: remove another unneeded function parameter
UBIFS: remove unneeded function parameter
...
Ingo Molnar [Wed, 13 Aug 2008 16:02:18 +0000 (18:02 +0200)]
x86: add MAP_STACK mmap flag
as per this discussion:
http://lkml.org/lkml/2008/8/12/423
Pardo reported that 64-bit threaded apps, if their stacks exceed the
combined size of ~4GB, slow down drastically in pthread_create() - because
glibc uses MAP_32BIT to allocate the stacks. The use of MAP_32BIT is
a legacy hack - to speed up context switching on certain early model
64-bit P4 CPUs.
So introduce a new flag to be used by glibc instead, to not constrain
64-bit apps like this.
glibc can switch to this new flag straight away - it will be ignored
by the kernel. If those old CPUs ever matter to anyone, support for
it can be implemented.
Marcin Slusarz [Fri, 15 Aug 2008 16:32:24 +0000 (18:32 +0200)]
x86: fix section mismatch warning - spp_getpage()
WARNING: vmlinux.o(.text+0x17a3e): Section mismatch in reference from the function set_pte_vaddr_pud() to the function .init.text:spp_getpage()
The function set_pte_vaddr_pud() references
the function __init spp_getpage().
This is often because set_pte_vaddr_pud lacks a __init
annotation or the annotation of spp_getpage is wrong.
spp_getpage is called from __init (__init_extra_mapping) and
non __init (set_pte_vaddr_pud) functions, so it can't be __init.
Unfortunately it calls alloc_bootmem_pages which is __init,
but does it only when bootmem allocator is available (after_bootmem == 0).
So annotate it accordingly.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com>
Linus Torvalds [Fri, 15 Aug 2008 16:30:24 +0000 (09:30 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: cancel check/repair requests when recovery is needed
Allow raid10 resync to happening in larger chunks.
Allow faulty devices to be removed from a readonly array.
Don't let a blocked_rdev interfere with read request in raid5/6
Fail safely when trying to grow an array with a write-intent bitmap.
Restore force switch of md array to readonly at reboot time.
Make writes to md/safe_mode_delay immediately effective.
Linus Torvalds [Fri, 15 Aug 2008 16:28:16 +0000 (09:28 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xilinx_ps2 - fix warning
Input: bcm5974 - implement autosuspend support
Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads
Input: paper over a bug in Synaptics X driver
Input: evdev - split EVIOCGBIT handlig into a separate function
Input: i8042 - Add Dritek quirk for Acer TravelMate 4280
Input: xpad - add Pelican Eclipse D-Pad to the list of devices
Input: gpio-keys - make gpio_keys_device_driver static
Input: gpio-keys - fix possible NULL pointer dereference
Input: wm97xx - enable sub-drivers by default
Linus Torvalds [Fri, 15 Aug 2008 16:26:37 +0000 (09:26 -0700)]
Merge branch 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6
* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6:
ACPI: Fix thermal shutdowns
ACPI: bounds check IRQ to prevent memory corruption
ACPI: Avoid bogus EC timeout when EC is in Polling mode
ACPI : Add the EC dmi table to fix the incorrect ECDT table
ACPI: Properly clear flags on false-positives and send uevent on sudden unplug
acpi: trivial cleanups
acer-wmi: Fix wireless and bluetooth on early AMW0 v2 laptops
ACPI: WMI: Set instance for query block calls
ACPICA: Additional error checking for pathname utilities
ACPICA: Fix possible memory leak in Unload() operator
ACPICA: Fix memory leak when deleting thermal/processor objects
Mark Brown [Fri, 15 Aug 2008 15:22:33 +0000 (16:22 +0100)]
ALSA: wm8990: Implement speaker volume PGA
The latest revisions of the WM8990 provide a programmable gain amplifier
for the speaker - configure the register cache and implement controls
for this. Older revisions of the device ignore writes to these controls.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bob Copeland [Fri, 15 Aug 2008 07:40:47 +0000 (00:40 -0700)]
omfs: fix oops when file metadata is corrupted
A fuzzed fileystem image failed with OMFS when the extent count was
used in a loop without being checked against the max number of extents.
It also provoked a signed division for an array index that was checked
as if unsigned, leading to index by -1.
omfsck will be updated to fix these cases, in the meantime bail out
gracefully.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bob Copeland [Fri, 15 Aug 2008 07:40:46 +0000 (00:40 -0700)]
omfs: fix potential oops when directory size is corrupted
Testing with a modified fsfuzzer reveals a couple of locations in omfs
where filesystem variables are ultimately used as loop counters with
insufficient sanity checking. In this case, dir->i_size is used to
compute the number of buckets in the directory hash. If too large,
readdir will overrun a buffer.
Since it's an invariant that dir->i_size is equal to the sysblock
size, and we already sanity check that, just use that value instead.
This fixes the following oops:
BUG: unable to handle kernel paging request at c978e004
IP: [<c032298e>] omfs_readdir+0x18e/0x32f
Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
Modules linked in:
David Brownell [Fri, 15 Aug 2008 07:40:44 +0000 (00:40 -0700)]
spi: bugfix spi_add_device() with duplicate chipselects
When reviewing a recent patch I noticed a potential trouble spot in the
registration of new SPI devices. The SPI master driver is told to set
the device up before adding it to the driver model, so that it's always
properly set up when probe() is called. (This is important, because in
the case of inverted chipselects, this device can make the bus misbehave
until it's properly deselected. It's got to be set up even if no driver
binds to the device.)
The trouble spot is that it doesn't first verify that no other device
has been added using that chipselect. If such a device has been added,
its configuration gets trashed. (Fortunately this has not been a common
error!)
The fix here adds an explicit check, and a mutex to protect the relevant
critical region.
[akpm@linux-foundation.org: make the lock local to spi_add_device()] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
write_cache_pages() uses i_mapping->writeback_index to pick up where it
left off the last time a given inode was found by pdflush or
balance_dirty_pages (or anyone else who sets wbc->range_cyclic)
alloc_inode() should set it to a sane value so that writeback doesn't
start in the middle of a file. It is somewhat difficult to notice the bug
since write_cache_pages will loop around to the start of the file and the
elevator helps hide the resulting seeks.
For whatever reason, Btrfs hits this often. Unpatched, untarring 30
copies of the linux kernel in series runs at 47MB/s on a single sata
drive. With this fix, it jumps to 62MB/s.
Signed-off-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Darrick J. Wong [Fri, 15 Aug 2008 07:40:41 +0000 (00:40 -0700)]
coretemp: recognize Nehalem CPUs
Add in the CPUID for Nehalem chips.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Kent Liu <kent.liu@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Darrick J. Wong [Fri, 15 Aug 2008 07:40:41 +0000 (00:40 -0700)]
ibmaem: don't query the entire sensor repository when reading energy meter
Currently, all sensors are read when the energy meter is queried via
sysfs. This introduces a considerable amount of delay and variation in
the sysfs reading, which is not desirable when trying to profile energy
use. Therefore, read only the energy meters when a sysfs query comes in
for them, and don't cache the results so that we always get the latest
reading.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log