Pavel Emelyanov [Fri, 19 Oct 2007 06:40:43 +0000 (23:40 -0700)]
Use task_pid_nr() in ip_vs_sync.c
The sync_master_pid and sync_backup_pid are set in set_sync_pid() and are
used later for set/not-set checks and in printk. So it is safe to use the
global pid value in this case.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:43 +0000 (23:40 -0700)]
Remove unused variables from fs/proc/base.c
When removing the explicit task_struct->pid usage I found that
proc_readfd_common() and proc_pident_readdir() get this field, but do not
use it at all. So this cleanup is a cheap help with the task_struct->pid
isolation.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 19 Oct 2007 06:40:41 +0000 (23:40 -0700)]
Use helpers to obtain task pid in printks (arch code)
One of the easiest things to isolate is the pid printed in kernel log.
There was a patch, that made this for arch-independent code, this one makes
so for arch/xxx files.
It took some time to cross-compile it, but hopefully these are all the
printks in arch code.
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:40 +0000 (23:40 -0700)]
Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.
The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.
[akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:39 +0000 (23:40 -0700)]
Isolate the explicit usage of signal->pgrp
The pgrp field is not used widely around the kernel so it is now marked as
deprecated with appropriate comment.
The initialization of INIT_SIGNALS is trimmed because
a) they are set to 0 automatically;
b) gcc cannot properly initialize two anonymous (the second one
is the one with the session) unions. In this particular case
to make it compile we'd have to add some field initialized
right before the .pgrp.
We have to deprecate the pid, tgid, session and pgrp fields on struct
task_struct and struct signal_struct. The session and pgrp are already
deprecated. The tgid value is close to being such - the worst known usage
in in fs/locks.c and audit code. The pid field deprecation is mainly
blocked by numerous printk-s around the kernel that print the tsk->pid to
log.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eugene Teo [Fri, 19 Oct 2007 06:40:38 +0000 (23:40 -0700)]
Fix tsk->exit_state usage
tsk->exit_state can only be 0, EXIT_ZOMBIE, or EXIT_DEAD. A non-zero test
is the same as tsk->exit_state & (EXIT_ZOMBIE | EXIT_DEAD), so just testing
tsk->exit_state is sufficient.
Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Horman [Fri, 19 Oct 2007 06:40:37 +0000 (23:40 -0700)]
proc: export a processes resource limits via /proc/pid
Currently, there exists no method for a process to query the resource
limits of another process. They can be inferred via some mechanisms but
they cannot be explicitly determined. Given that this information can be
usefull to know during the debugging of an application, I've written this
patch which exports all of a processes limits via /proc/<pid>/limits.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Fri, 19 Oct 2007 06:40:32 +0000 (23:40 -0700)]
get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines
use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)
Jiri Slaby [Fri, 19 Oct 2007 06:40:31 +0000 (23:40 -0700)]
define first set of BIT* macros
define first set of BIT* macros
- move BITOP_MASK and BITOP_WORD from asm-generic/bitops/atomic.h to
include/linux/bitops.h and rename it to BIT_MASK and BIT_WORD
- move BITS_TO_LONGS and BITS_PER_BYTE to bitops.h too and allow easily
define another BITS_TO_something (e.g. in event.c) by BITS_TO_TYPE macro
Remaining (and common) BIT macro will be defined after all occurences and
conflicts will be sorted out in the patches.
Jiri Slaby [Fri, 19 Oct 2007 06:40:26 +0000 (23:40 -0700)]
forbid asm/bitops.h direct inclusion
forbid asm/bitops.h direct inclusion
Because of compile errors that may occur after bit changes if asm/bitops.h is
included directly without e.g. linux/kernel.h which includes linux/bitops.h,
forbid direct inclusion of asm/bitops.h. Thanks to Adrian Bunk.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Fri, 19 Oct 2007 06:40:25 +0000 (23:40 -0700)]
remove asm/bitops.h includes
remove asm/bitops.h includes
including asm/bitops directly may cause compile errors. don't include it
and include linux/bitops instead. next patch will deny including asm header
directly.
Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Fri, 19 Oct 2007 06:40:24 +0000 (23:40 -0700)]
Misc: phantom, improved data passing
This new version guarantees amb_bit switch in small enough intervals, so that
the device won't stop working in the middle of a movement anymore. However it
preserves old (openhaptics) functionality.
Paul Menage [Fri, 19 Oct 2007 06:40:22 +0000 (23:40 -0700)]
Fix cpusets update_cpumask
Cause writes to cpuset "cpus" file to update cpus_allowed for member tasks:
- collect batches of tasks under tasklist_lock and then call
set_cpus_allowed() on them outside the lock (since this can sleep).
- add a simple generic priority heap type to allow efficient collection
of batches of tasks to be processed without duplicating or missing any
tasks in subsequent batches.
- make "cpus" file update a no-op if the mask hasn't changed
- fix race between update_cpumask() and sched_setaffinity() by making
sched_setaffinity() post-check that it's not running on any cpus outside
cpuset_cpus_allowed().
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Paul Menage <menage@google.com> Cc: Paul Jackson <pj@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Jackson [Fri, 19 Oct 2007 06:40:21 +0000 (23:40 -0700)]
cpusets: decrustify cpuset mask update code
Decrustify the kernel/cpuset.c 'cpus' and 'mems' updating code.
Other than subtle improvements in the consistency of identifying
white space at the beginning and end of passed in masks, this
doesn't make any visible difference in behaviour. But it's
one or two hundred kernel text bytes smaller, and easier to
understand.
[akpm@linux-foundation.org: coding-style fix] Signed-off-by: Paul Jackson <pj@sgi.com> Reviewed-by: Paul Menage <menage@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Jackson [Fri, 19 Oct 2007 06:40:20 +0000 (23:40 -0700)]
cpuset sched_load_balance flag
Add a new per-cpuset flag called 'sched_load_balance'.
When enabled in a cpuset (the default value) it tells the kernel scheduler
that the scheduler should provide the normal load balancing on the CPUs in
that cpuset, sometimes moving tasks from one CPU to a second CPU if the
second CPU is less loaded and if that task is allowed to run there.
When disabled (write "0" to the file) then it tells the kernel scheduler
that load balancing is not required for the CPUs in that cpuset.
Now even if this flag is disabled for some cpuset, the kernel may still
have to load balance some or all the CPUs in that cpuset, if some
overlapping cpuset has its sched_load_balance flag enabled.
If there are some CPUs that are not in any cpuset whose sched_load_balance
flag is enabled, the kernel scheduler will not load balance tasks to those
CPUs.
Moreover the kernel will partition the 'sched domains' (non-overlapping
sets of CPUs over which load balancing is attempted) into the finest
granularity partition that it can find, while still keeping any two CPUs
that are in the same shed_load_balance enabled cpuset in the same element
of the partition.
This serves two purposes:
1) It provides a mechanism for real time isolation of some CPUs, and
2) it can be used to improve performance on systems with many CPUs
by supporting configurations in which load balancing is not done
across all CPUs at once, but rather only done in several smaller
disjoint sets of CPUs.
This mechanism replaces the earlier overloading of the per-cpuset
flag 'cpu_exclusive', which overloading was removed in an earlier
patch: cpuset-remove-sched-domain-hooks-from-cpusets
See further the Documentation and comments in the code itself.
[akpm@linux-foundation.org: don't be weird] Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:19 +0000 (23:40 -0700)]
Uninline the task_xid_nr_ns() calls
Since these are expanded into call to pid_nr_ns() anyway, it's OK to move
the whole routine out-of-line. This is a cheap way to save ~100 bytes from
vmlinux. Together with the previous two patches, it saves half-a-kilo from
the vmlinux.
Un-inline other (currently inlined) functions must be done with additional
performance testing.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:19 +0000 (23:40 -0700)]
Uninline find_pid etc set of functions
The find_pid/_vpid/_pid_ns functions are used to find the struct pid by its
id, depending on whic id - global or virtual - is used.
The find_vpid() is a macro that pushes the current->nsproxy->pid_ns on the
stack to call another function - find_pid_ns(). It turned out, that this
dereference together with the push itself cause the kernel text size to
grow too much.
Move all these out-of-line. Together with the previous patch this saves a
bit less that 400 bytes from .text section.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:18 +0000 (23:40 -0700)]
Isolate some explicit usage of task->tgid
With pid namespaces this field is now dangerous to use explicitly, so hide
it behind the helpers.
Also the pid and pgrp fields o task_struct and signal_struct are to be
deprecated. Unfortunately this patch cannot be sent right now as this
leads to tons of warnings, so start isolating them, and deprecate later.
Actually the p->tgid == pid has to be changed to has_group_leader_pid(),
but Oleg pointed out that in case of posix cpu timers this is the same, and
thread_group_leader() is more preferable.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:16 +0000 (23:40 -0700)]
Uninline find_task_by_xxx set of functions
The find_task_by_something is a set of macros are used to find task by pid
depending on what kind of pid is proposed - global or virtual one. All of
them are wrappers above the most generic one - find_task_by_pid_type_ns() -
and just substitute some args for it.
It turned out, that dereferencing the current->nsproxy->pid_ns construction
and pushing one more argument on the stack inline cause kernel text size to
grow.
This patch moves all this stuff out-of-line into kernel/pid.c. Together
with the next patch it saves a bit less than 400 bytes from the .text
section.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:14 +0000 (23:40 -0700)]
pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.
The idea is:
- all in-kernel data structures must store either struct pid itself
or the pid's global nr, obtained with pid_nr() call;
- when seeking the task from kernel code with the stored id one
should use find_task_by_pid() call that works with global pids;
- when showing pid's numerical value to the user the virtual one
should be used, but however when one shows task's pid outside this
task's namespace the global one is to be used;
- when getting the pid from userspace one need to consider this as
the virtual one and use appropriate task/pid-searching functions.
pid namespaces: destroy pid namespace on init's death
Terminate all processes in a namespace when the reaper of the namespace is
exiting. We do this by walking the pidmap of the namespace and sending
SIGKILL to all processes.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only the global-init process must be special - any other cgroup-init
process must be killable to prevent run-away processes in the system.
TODO: Ideally we should allow killing the cgroup-init only from parent
cgroup and prevent it being killed from within the cgroup.
But that is a more complex change and will be addressed by a follow-on
patch. For now allow the cgroup-init to be terminated by any process
with sufficient privileges.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:11 +0000 (23:40 -0700)]
pid namespaces: initialize the namespace's proc_mnt
The namespace's proc_mnt must be kern_mount-ed to make this pointer always
valid, independently of whether the user space mounted the proc or not. This
solves raced in proc_flush_task, etc. with the proc_mnt switching from NULL
to not-NULL.
The initialization is done after the init's pid is created and hashed to make
proc_get_sb() finr it and get for root inode.
Sice the namespace holds the vfsmnt, vfsmnt holds the superblock and the
superblock holds the namespace we must explicitly break this circle to destroy
all the stuff. This is done after the init of the namespace dies. Running a
few steps forward - when init exits it will kill all its children, so no
proc_mnt will be needed after its death.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:11 +0000 (23:40 -0700)]
pid namespaces: make proc_flush_task() actually from entries from multiple namespaces
This means that proc_flush_task_mnt() is to be called for many proc mounts and
with different ids, depending on the namespace this pid is to be flushed from.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:10 +0000 (23:40 -0700)]
pid namespaces: allow cloning of new namespace
When clone() is invoked with CLONE_NEWPID, create a new pid namespace and then
create a new struct pid for the new process. Allocate pid_t's for the new
process in the new pid namespace and all ancestor pid namespaces. Make the
newly cloned process the session and process group leader.
Since the active pid namespace is special and expected to be the first entry
in pid->upid_list, preserve the order of pid namespaces.
The size of 'struct pid' is dependent on the the number of pid namespaces the
process exists in, so we use multiple pid-caches'. Only one pid cache is
created during system startup and this used by processes that exist only in
init_pid_ns.
When a process clones its pid namespace, we create additional pid caches as
necessary and use the pid cache to allocate 'struct pids' for that depth.
Note, that with this patch the newly created namespace won't work, since the
rest of the kernel still uses global pids, but this is to be fixed soon. Init
pid namespace still works.
[oleg@tv-sign.ru: merge fix] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:09 +0000 (23:40 -0700)]
pid namespaces: miscellaneous preparations for pid namespaces
* remove pid.h from pid_namespaces.h;
* rework is_(cgroup|global)_init;
* optimize (get|put)_pid_ns for init_pid_ns;
* declare task_child_reaper to return actual reaper.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:08 +0000 (23:40 -0700)]
pid namespaces: make proc have multiple superblocks - one for each namespace
Each pid namespace have to be visible through its own proc mount. Thus we
need to have per-namespace proc trees with their own superblocks.
We cannot easily show different pid namespace via one global proc tree, since
each pid refers to different tasks in different namespaces. E.g. pid 1
refers to the init task in the initial namespace and to some other task when
seeing from another namespace. Moreover - pid, exisintg in one namespace may
not exist in the other.
This approach has one move advantage is that the tasks from the init namespace
can see what tasks live in another namespace by reading entries from another
proc tree.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:07 +0000 (23:40 -0700)]
pid namespaces: move alloc_pid() lower in copy_process()
When we create new namespace we will need to allocate the struct pid, that
will have one extra struct upid in array, comparing to the parent.
Thus we need to know the new namespace (if any) in alloc_pid() to init this
struct upid properly, so move the alloc_pid() call lower in copy_process().
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:06 +0000 (23:40 -0700)]
pid namespaces: helpers to find the task by its numerical ids
When searching the task by numerical id on may need to find it using global
pid (as it is done now in kernel) or by its virtual id, e.g. when sending a
signal to a task from one namespace the sender will specify the task's virtual
id and we should find the task by this value.
[akpm@linux-foundation.org: fix gfs2 linkage] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:06 +0000 (23:40 -0700)]
pid namespaces: helpers to obtain pid numbers
When showing pid to user or getting the pid numerical id for in-kernel use the
value of this id may differ depending on the namespace.
This set of helpers is used to get the global pid nr, the virtual (i.e. seen
by task in its namespace) nr and the nr as it is seen from the specified
namespace.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:05 +0000 (23:40 -0700)]
pid namespaces: make alloc_pid(), free_pid() and put_pid() work with struct upid
Each struct upid element of struct pid has to be initialized properly, i.e.
its nr mst be allocated from appropriate pidmap and ns set to appropriate
namespace.
When allocating a new pid, we need to know the namespace this pid will live
in, so the additional argument is added to alloc_pid().
On the other hand, the rest of the kernel still uses the pid->nr and
pid->pid_chain fields, so these ones are still initialized, but this will be
removed soon.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:04 +0000 (23:40 -0700)]
pid namespaces: add support for pid namespaces hierarchy
Each namespace has a parent and is characterized by its "level". Level is the
number of the namespace generation. E.g. init namespace has level 0, after
cloning new one it will have level 1, the next one - 2 and so on and so forth.
This level is not explicitly limited.
True hierarchy must have some way to find each namespace's children, but it is
not used in the patches, so this ability is not added (yet).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since task will be visible from different pid namespaces each of them have to
be addressed by multiple pids. struct upid is to store the information about
which id refers to which namespace.
The constuciton looks like this. Each struct pid carried the reference
counter and the list of tasks attached to this pid. At its end it has a
variable length array of struct upid-s. Each struct upid has a numerical id
(pid itself), pointer to the namespace, this ID is valid in and is hashed into
a pid_hash for searching the pids.
The nr and pid_chain fields are kept in struct pid for a while to make kernel
still work (no patch initialize the upids yet), but it will be removed at the
end of this series when we switch to upids completely.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:03 +0000 (23:40 -0700)]
pid namespaces: prepare proc_flust_task() to flush entries from multiple proc trees
The first part is trivial - we just make the proc_flush_task() to operate on
arbitrary vfsmount with arbitrary ids and pass the pid and global proc_mnt to
it.
The other change is more tricky: I moved the proc_flush_task() call in
release_task() higher to address the following problem.
When flushing task from many proc trees we need to know the set of ids (not
just one pid) to find the dentries' names to flush. Thus we need to pass the
task's pid to proc_flush_task() as struct pid is the only object that can
provide all the pid numbers. But after __exit_signal() task has detached all
his pids and this information is lost.
This creates a tiny gap for proc_pid_lookup() to bring some dentries back to
tree and keep them in hash (since pids are still alive before __exit_signal())
till the next shrink, but since proc_flush_task() does not provide a 100%
guarantee that the dentries will be flushed, this is OK to do so.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:02 +0000 (23:40 -0700)]
pid namespaces: introduce MS_KERNMOUNT flag
This flag tells the .get_sb callback that this is a kern_mount() call so that
it can trust *data pointer to be valid in-kernel one. If this flag is passed
from the user process, it is cleared since the *data pointer is not a valid
kernel object.
Running a few steps forward - this will be needed for proc to create the
superblock and store a valid pid namespace on it during the namespace
creation. The reason, why the namespace cannot live without proc mount is
described in the appropriate patch.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:40:01 +0000 (23:40 -0700)]
pid namespaces: move exit_task_namespaces()
Make task release its namespaces after it has reparented all his children to
child_reaper, but before it notifies its parent about its death.
The reason to release namespaces after reparenting is that when task exits it
may send a signal to its parent (SIGCHLD), but if the parent has already
exited its namespaces there will be no way to decide what pid to dever to him
- parent can be from different namespace.
The reason to release namespace before notifying the parent it that when task
sends a SIGCHLD to parent it can call wait() on this taks and release it. But
releasing the mnt namespace implies dropping of all the mounts in the mnt
namespace and NFS expects the task to have valid sighand pointer.
Thanks to Oleg for pointing out some races that can apear and helping with
patches and fixes.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Fri, 19 Oct 2007 06:40:00 +0000 (23:40 -0700)]
pid namespaces: rework forget_original_parent()
A pid namespace is a "view" of a particular set of tasks on the system. They
work in a similar way to filesystem namespaces. A file (or a process) can be
accessed in multiple namespaces, but it may have a different name in each. In
a filesystem, this name might be /etc/passwd in one namespace, but
/chroot/etc/passwd in another.
For processes, a process may have pid 1234 in one namespace, but be pid 1 in
another. This allows new pid namespaces to have basically arbitrary pids, and
not have to worry about what pids exist in other namespaces. This is
essential for checkpoint/restart where a restarted process's pid might collide
with an existing process on the system's pid.
In this particular implementation, pid namespaces have a parent-child
relationship, just like processes. A process in a pid namespace may see all
of the processes in the same namespace, as well as all of the processes in all
of the namespaces which are children of its namespace. Processes may not,
however, see others which are in their parent's namespace, but not in their
own. The same goes for sibling namespaces.
The know issue to be solved in the nearest future is signal handling in the
namespace boundary. That is, currently the namespace's init is treated like
an ordinary task that can be killed from within an namespace. Ideally, the
signal handling by the namespace's init should have two sides: when signaling
the init from its namespace, the init should look like a real init task, i.e.
receive only those signals, that is explicitly wants to; when signaling the
init from one of the parent namespaces, init should look like an ordinary
task, i.e. receive any signal, only taking the general permissions into
account.
The pid namespace was developed by Pavel Emlyanov and Sukadev Bhattiprolu and
we eventually came to almost the same implementation, which differed in some
details. This set is based on Pavel's patches, but it includes comments and
patches that from Sukadev.
Many thanks to Oleg, who reviewed the patches, pointed out many BUGs and made
valuable advises on how to make this set cleaner.
This patch:
We have to call exit_task_namespaces() only after the exiting task has
reparented all his children and is sure that no other threads will reparent
theirs for it. Why this is needed is explained in appropriate patch. This
one only reworks the forget_original_parent() so that after calling this a
task cannot be/become parent of any other task.
We check PF_EXITING instead of ->exit_state while choosing the new parent.
Note that tasklits_lock acts as a barrier, everyone who takes tasklist after
us (when forget_original_parent() drops it) must see PF_EXITING.
The other changes are just cleanups. They just move some code from
exit_notify to forget_original_parent(). It is a bit silly to declare
ptrace_dead in exit_notify(), take tasklist, pass ptrace_dead to
forget_original_parent(), unlock-lock-unlock tasklist, and then use
ptrace_dead.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel/time/clocksource.c: Use list_for_each_entry instead of list_for_each
kernel/time/clocksource.c: Convert list_for_each to
list_for_each_entry in clocksource_resume(),
sysfs_override_clocksource() and show_available_clocksources()
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/super.c: use list_for_each_entry() instead of list_for_each()
fs/super.c: use list_for_each_entry() instead of list_for_each() in
sget()
[akpm@linux-foundation.org: clean up some crap while we're there] Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Fri, 19 Oct 2007 06:39:54 +0000 (23:39 -0700)]
Make access to task's nsproxy lighter
When someone wants to deal with some other taks's namespaces it has to lock
the task and then to get the desired namespace if the one exists. This is
slow on read-only paths and may be impossible in some cases.
E.g. Oleg recently noticed a race between unshare() and the (sent for
review in cgroups) pid namespaces - when the task notifies the parent it
has to know the parent's namespace, but taking the task_lock() is
impossible there - the code is under write locked tasklist lock.
On the other hand switching the namespace on task (daemonize) and releasing
the namespace (after the last task exit) is rather rare operation and we
can sacrifice its speed to solve the issues above.
The access to other task namespaces is proposed to be performed
like this:
rcu_read_lock();
nsproxy = task_nsproxy(tsk);
if (nsproxy != NULL) {
/ *
* work with the namespaces here
* e.g. get the reference on one of them
* /
} / *
* NULL task_nsproxy() means that this task is
* almost dead (zombie)
* /
rcu_read_unlock();
This patch has passed the review by Eric and Oleg :) and,
of course, tested.
[clg@fr.ibm.com: fix unshare()]
[ebiederm@xmission.com: Update get_net_ns_by_pid] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pid namespaces: move alloc_pid() to copy_process()
Move alloc_pid() into copy_process(). This will keep all pid and pid
namespace code together and simplify error handling when we support multiple
pid namespaces.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Serge E. Hallyn [Fri, 19 Oct 2007 06:39:52 +0000 (23:39 -0700)]
pid namespaces: define is_global_init() and is_container_init()
is_init() is an ambiguous name for the pid==1 check. Split it into
is_global_init() and is_container_init().
A cgroup init has it's tsk->pid == 1.
A global init also has it's tsk->pid == 1 and it's active pid namespace
is the init_pid_ns. But rather than check the active pid namespace,
compare the task structure with 'init_pid_ns.child_reaper', which is
initialized during boot to the /sbin/init process and never changes.
Changelog:
2.6.22-rc4-mm2-pidns1:
- Use 'init_pid_ns.child_reaper' to determine if a given task is the
global init (/sbin/init) process. This would improve performance
and remove dependence on the task_pid().
2.6.21-mm2-pidns2:
- [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc,
ppc,avr32}/traps.c for the _exception() call to is_global_init().
This way, we kill only the cgroup if the cgroup's init has a
bug rather than force a kernel panic.
[akpm@linux-foundation.org: fix comment]
[sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c]
[bunk@stusta.de: kernel/pid.c: remove unused exports]
[sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename the child_reaper() function to task_child_reaper() to be similar to
other task_* functions and to distinguish the function from 'struct
pid_namspace.child_reaper'.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pid namespaces: define and use task_active_pid_ns() wrapper
With multiple pid namespaces, a process is known by some pid_t in every
ancestor pid namespace. Every time the process forks, the child process also
gets a pid_t in every ancestor pid namespace.
While a process is visible in >=1 pid namespaces, it can see pid_t's in only
one pid namespace. We call this pid namespace it's "active pid namespace",
and it is always the youngest pid namespace in which the process is known.
This patch defines and uses a wrapper to find the active pid namespace of a
process. The implementation of the wrapper will be changed in when support
for multiple pid namespaces are added.
Changelog:
2.6.22-rc4-mm2-pidns1:
- [Pavel Emelianov, Alexey Dobriyan] Back out the change to use
task_active_pid_ns() in child_reaper() since task->nsproxy
can be NULL during task exit (so child_reaper() continues to
use init_pid_ns).
to implement child_reaper() since init_pid_ns.child_reaper to
implement child_reaper() since tsk->nsproxy can be NULL during exit.
2.6.21-rc6-mm1:
- Rename task_pid_ns() to task_active_pid_ns() to reflect that a
process can have multiple pid namespaces.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelianov [Fri, 19 Oct 2007 06:39:48 +0000 (23:39 -0700)]
pid namespaces: dynamic kmem cache allocator for pid namespaces
Add kmem_cache to pid_namespace to allocate pids from.
Since both implementations expand the struct pid to carry more numerical
values each namespace should have separate cache to store pids of different
sizes.
Each kmem cache is name "pid_<NR>", where <NR> is the number of numerical ids
on the pid. Different namespaces with same level of nesting will have same
caches.
This patch has two FIXMEs that are to be fixed after we reach the consensus
about the struct pid itself.
The first one is that the namespace to free the pid from in free_pid() must be
taken from pid. Now the init_pid_ns is used.
The second FIXME is about the cache allocation. When we do know how long the
object will be then we'll have to calculate this size in create_pid_cachep.
Right now the sizeof(struct pid) value is used.
[akpm@linux-foundation.org: coding-style repair] Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Cedric Le Goater <clg@fr.ibm.com> Acked-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelianov [Fri, 19 Oct 2007 06:39:46 +0000 (23:39 -0700)]
pid namespaces: round up the API
The set of functions process_session, task_session, process_group and
task_pgrp is confusing, as the names can be mixed with each other when looking
at the code for a long time.
The proposals are to
* equip the functions that return the integer with _nr suffix to
represent that fact,
* and to make all functions work with task (not process) by making
the common prefix of the same name.
For monotony the routines signal_session() and set_signal_session() are
replaced with task_session_nr() and set_task_session(), especially since they
are only used with the explicit task->signal dereference.
Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Serge E. Hallyn [Fri, 19 Oct 2007 06:39:45 +0000 (23:39 -0700)]
cgroups: implement namespace tracking subsystem
When a task enters a new namespace via a clone() or unshare(), a new cgroup
is created and the task moves into it.
This version names cgroups which are automatically created using
cgroup_clone() as "node_<pid>" where pid is the pid of the unsharing or
cloned process. (Thanks Pavel for the idea) This is safe because if the
process unshares again, it will create
/cgroups/(...)/node_<pid>/node_<pid>
The only possibilities (AFAICT) for a -EEXIST on unshare are
1. pid wraparound
2. a process fails an unshare, then tries again.
Case 1 is unlikely enough that I ignore it (at least for now). In case 2, the
node_<pid> will be empty and can be rmdir'ed to make the subsequent unshare()
succeed.
Changelog:
Name cloned cgroups as "node_<pid>".
[clg@fr.ibm.com: fix order of cgroup subsystems in init/Kconfig] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Fri, 19 Oct 2007 06:39:44 +0000 (23:39 -0700)]
Add cgroupstats
This patch is inspired by the discussion at
http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics
as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The
patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward
ported)
This patch implements per cgroup statistics infrastructure and re-uses
code from the taskstats interface. A new set of cgroup operations are
registered with commands and attributes. It should be very easy to
*extend* per cgroup statistics, by adding members to the cgroupstats
structure.
The current model for cgroupstats is a pull, a push model (to post
statistics on interesting events), should be very easy to add. Currently
user space requests for statistics by passing the cgroup file
descriptor. Statistics about the state of all the tasks in the cgroup
is returned to user space.
TODO's/NOTE:
This patch provides an infrastructure for implementing cgroup statistics.
Based on the needs of each controller, we can incrementally add more statistics,
event based support for notification of statistics, accumulation of taskstats
into cgroup statistics in the future.
Paul Jackson [Fri, 19 Oct 2007 06:39:43 +0000 (23:39 -0700)]
task cgroups: enable cgroups by default in some configs
In pre-cgroup cpusets, a few config files enabled cpusets by default.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:42 +0000 (23:39 -0700)]
Task Control Groups: example CPU accounting subsystem
This example demonstrates how to use the generic cgroup subsystem for a
simple resource tracker that counts, for the processes in a cgroup, the
total CPU time used and the %CPU used in the last complete 10 second interval.
Portions contributed by Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:39 +0000 (23:39 -0700)]
Task Control Groups: make cpusets a client of cgroups
Remove the filesystem support logic from the cpusets system and makes cpusets
a cgroup subsystem
The "cpuset" filesystem becomes a dummy filesystem; attempts to mount it get
passed through to the cgroup filesystem with the appropriate options to
emulate the old cpuset filesystem behaviour.
Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:38 +0000 (23:39 -0700)]
Task Control Groups: automatic userspace notification of idle cgroups
Add the following files to the cgroup filesystem:
notify_on_release - configures/reports whether the cgroup subsystem should
attempt to run a release script when this cgroup becomes unused
release_agent - configures/reports the release agent to be used for this
hierarchy (top level in each hierarchy only)
releasable - reports whether this cgroup would have been auto-released if
notify_on_release was true and a release agent was configured (mainly useful
for debugging)
To avoid locking issues, invoking the userspace release agent is done via a
workqueue task; cgroups that need to have their release agents invoked by
the workqueue task are linked on to a list.
[pj@sgi.com: Need to include kmod.h] Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:36 +0000 (23:39 -0700)]
Task Control Groups: shared cgroup subsystem group arrays
Replace the struct css_set embedded in task_struct with a pointer; all tasks
that have the same set of memberships across all hierarchies will share a
css_set object, and will be linked via their css_sets field to the "tasks"
list_head in the css_set.
Assuming that many tasks share the same cgroup assignments, this reduces
overall space usage and keeps the size of the task_struct down (three pointers
added to task_struct compared to a non-cgroups kernel, no matter how many
subsystems are registered).
[akpm@linux-foundation.org: fix a printk]
[akpm@linux-foundation.org: build fix] Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:34 +0000 (23:39 -0700)]
Task Control Groups: add cgroup_clone() interface
Add support for cgroup_clone(), a way to create new cgroups intended to
be used for systems such as namespace unsharing. A new subsystem callback,
post_clone(), is added to allow subsystems to automatically configure cloned
cgroups.
Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:33 +0000 (23:39 -0700)]
Task Control Groups: add fork()/exit() hooks
This adds the necessary hooks to the fork() and exit() paths to ensure
that new children inherit their parent's cgroup assignments, and that
exiting processes release reference counts on their cgroups.
Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:33 +0000 (23:39 -0700)]
Add cgroup write_uint() helper method
Add write_uint() helper method for cgroup subsystems
This helper is analagous to the read_uint() helper method for
reporting u64 values to userspace. It's designed to reduce the amount
of boilerplate requierd for creating new cgroup subsystems.
Signed-off-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:32 +0000 (23:39 -0700)]
Task Control Groups: add tasks file interface
Add the per-directory "tasks" file for cgroupfs mounts; this allows the
user to determine which tasks are members of a cgroup by reading a
cgroup's "tasks", and to move a task into a cgroup by writing its pid to
its "tasks".
Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Fri, 19 Oct 2007 06:39:30 +0000 (23:39 -0700)]
Task Control Groups: basic task cgroup framework
Generic Process Control Groups
--------------------------
There have recently been various proposals floating around for
resource management/accounting and other task grouping subsystems in
the kernel, including ResGroups, User BeanCounters, NSProxy
cgroups, and others. These all need the basic abstraction of being
able to group together multiple processes in an aggregate, in order to
track/limit the resources permitted to those processes, or control
other behaviour of the processes, and all implement this grouping in
different ways.
This patchset provides a framework for tracking and grouping processes
into arbitrary "cgroups" and assigning arbitrary state to those
groupings, in order to control the behaviour of the cgroup as an
aggregate.
The intention is that the various resource management and
virtualization/cgroup efforts can also become task cgroup
clients, with the result that:
- the userspace APIs are (somewhat) normalised
- it's easier to test e.g. the ResGroups CPU controller in
conjunction with the BeanCounters memory controller, or use either of
them as the resource-control portion of a virtual server system.
- the additional kernel footprint of any of the competing resource
management systems is substantially reduced, since it doesn't need
to provide process grouping/containment, hence improving their
chances of getting into the kernel
This patch:
Add the main task cgroups framework - the cgroup filesystem, and the
basic structures for tracking membership and associating subsystem state
objects to tasks.
Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Jackson [Fri, 19 Oct 2007 06:39:28 +0000 (23:39 -0700)]
cpuset: zero malloc - revert the old cpuset fix
The cpuset code to present a list of tasks using a cpuset to user space could
write to an array that it had kmalloc'd, after a kmalloc request of zero size.
The problem was that the code didn't check for writes past the allocated end
of the array until -after- the first write.
This is a race condition that is likely rare -- it would only show up if a
cpuset went from being empty to having a task in it, during the brief time
between the allocation and the first write.
Prior to roughly 2.6.22 kernels, this was also a benign problem, because a
zero kmalloc returned a few usable bytes anyway, and no harm was done with the
bogus write.
With the 2.6.22 kernel changes to make issue a warning if code tries to write
to the location returned from a zero size allocation, this problem is no
longer benign. This cpuset code would occassionally trigger that warning.
The fix is trivial -- check before storing into the array, not after, whether
the array is big enough to hold the store.
Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 19 Oct 2007 06:39:28 +0000 (23:39 -0700)]
kernel-api docbook: fix content problems
Fix kernel-api docbook contents problems.
docproc: linux-2.6.23-git13/include/asm-x86/unaligned_32.h: No such file or directory
Warning(linux-2.6.23-git13//include/linux/list.h:482): bad line: of list entry
Warning(linux-2.6.23-git13//mm/filemap.c:864): No description found for parameter 'ra'
Warning(linux-2.6.23-git13//block/ll_rw_blk.c:3760): No description found for parameter 'req'
Warning(linux-2.6.23-git13//include/linux/input.h:1077): No description found for parameter 'private'
Warning(linux-2.6.23-git13//include/linux/input.h:1077): No description found for parameter 'cdev'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: WU Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Fri, 19 Oct 2007 06:39:27 +0000 (23:39 -0700)]
reiserfs: ignore on disk s_bmap_nr value
Implement support for file systems larger than 8 TiB.
The reiserfs superblock contains a 16 bit value for counting the number of
bitmap blocks. The rest of the disk format supports file systems up to 2^32
blocks, but the bitmap block limitation artificially limits this to 8 TiB with
a 4KiB block size.
Rather than trust the superblock's 16-bit bitmap block count, we calculate it
dynamically based on the number of blocks in the file system. When an
incorrect value is observed in the superblock, it is zeroed out, ensuring that
older kernels will not be able to mount the file system.
Userspace support has already been implemented and shipped in reiserfsprogs
3.6.20.
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Fri, 19 Oct 2007 06:39:26 +0000 (23:39 -0700)]
reiserfs: remove first_zero_hint
The first_zero_hint metadata caching was never actually used, and it's of
dubious optimization quality. This patch removes it.
It doesn't actually shrink the size of the reiserfs_bitmap_info struct, since
that doesn't work with block sizes larger than 8K. There was a big fixme in
there, and with all the work lately in allowing block size > page size, I
might as well kill the fixme as well.
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Fri, 19 Oct 2007 06:39:25 +0000 (23:39 -0700)]
reiserfs: fix usage of signed ints for block numbers
Do a quick signedness check for block numbers. There are a number of places
where signed integers are used for block numbers, which limits the usable file
system size to 8 TiB. The disk format, excepting a problem which will be
fixed in the following patch, supports file systems up to 16 TiB in size.
This patch cleans up those sites so that we can enable the full usable size.
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Fri, 19 Oct 2007 06:39:25 +0000 (23:39 -0700)]
reiserfs: fix memset byte count during resize
Correct the memset in reiserfs_resize to clear the memory allocated for the
new bitmap info structs. Previously, it would clear the memory used by the
old size. Depending on the contents of memory, this could cause incorrect
caching behavior for bitmap blocks in the newly allocated area.
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Fri, 19 Oct 2007 06:39:24 +0000 (23:39 -0700)]
reiserfs: dont use BUG when panicking
Change reiserfs_panic() to use panic() initially instead of BUG(). Using
BUG() ignores the configurable panic behavior, so systems that should be
failing and rebooting are left hanging. This causes problems in
active/standby HA scenarios.
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jose R. Santos [Fri, 19 Oct 2007 06:39:23 +0000 (23:39 -0700)]
JBD: Fix JBD warnings when compiling with CONFIG_JBD_DEBUG
Note from Mingming's JBD2 fix:
Noticed all warnings are occurs when the debug level is 0. Then found the
"jbd2: Move jbd2-debug file to debugfs" patch
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0f49d5d019afa4e94253bfc92f0daca3badb990b
changed the jbd2_journal_enable_debug from int type to u8, makes the
jbd_debug comparision is always true when the debugging level is 0. Thus
the compile warning occurs.
Thought about changing the jbd2_journal_enable_debug data type back to int,
but can't, because the jbd2-debug is moved to debug fs, where calling
debugfs_create_u8() to create the debugfs entry needs the value to be u8
type.
Even if we changed the data type back to int, the code is still buggy,
kernel should not print jbd2 debug message if the jbd2_journal_enable_debug
is set to 0. But this is not the case.
The fix is change the level of debugging to 1. The same should fixed in
ext3/JBD, but currently ext3 jbd-debug via /proc fs is broken, so we
probably should fix it all together.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 19 Oct 2007 06:39:22 +0000 (23:39 -0700)]
jbd: fix commit code to properly abort journal
We should really call journal_abort() and not __journal_abort_hard() in
case of errors. The latter call does not record the error in the journal
superblock and thus filesystem won't be marked as with errors later (and
user could happily mount it without any warning).
Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jose R. Santos [Fri, 19 Oct 2007 06:39:22 +0000 (23:39 -0700)]
jbd: config_jbd_debug cannot create /proc entry
The jbd-debug file used to be located in /proc/sys/fs/jbd-debug, but
create_proc_entry() does not do lookups on file names that are more that
one directory deep. This causes the entry creation to fail and hence, no
proc file is created.
Instead of fixing this on procfs might as well move the jbd2-debug file to
debugfs which would be the preferred location for this kind of tunable.
The new location is now /sys/kernel/debug/jbd/jbd-debug.
[akpm@linux-foundation.org: zillions of cleanups] Signed-off-by: Jose R. Santos <jrs@us.ibm.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
isdn/sc: remove unused REQUEST_IRQ and unnecessary header file
REQUEST_IRQ is never used, so delete it. In the process get rid of the
macro FREE_IRQ which makes the code unnecessarily difficult to read.
Signed-off-by: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log