Martin Pitt [Fri, 20 Aug 2010 10:19:23 +0000 (12:19 +0200)]
udev(7): Point out required extension, and remove some confusion
Rules files must end in .rules.
Also drop the redundant and confusing sentence about "file names must be
unique". What is really meant is explained in a better way in the paragraph
above.
Jan Drzewiecki [Fri, 13 Aug 2010 05:24:29 +0000 (07:24 +0200)]
cdrom_id: Drop MEDIA_SESSION_NEXT for DVD-RW-RO
Commit cf2205a fixed the media status for fresh DVD-RW in restricted overwrite
mode, but missed a detail: We should not report the ID_CDROM_MEDIA_SESSION_NEXT
property either, since in that mode you can never append tracks/sessions; this
just works in sequential mode.
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Kay Sievers [Wed, 11 Aug 2010 12:34:32 +0000 (14:34 +0200)]
do not rename the database on device rename
Harald Hoyer discovered some incorrect behavior while debugging
problems with network interface renaming:
Udev events might be queued for devices which are renamed. A new
device registered the same time may claime the old name and create
a database entry for it. The current rename logic would move over
this databse entry to the wrong device.
Jan Drzewiecki [Tue, 10 Aug 2010 21:37:14 +0000 (23:37 +0200)]
cdrom_id: Fix state for fresh DVD-RW
Fresh DVD-RW in restricted overwite mode reports itself as "appendable"; change
it to "blank" to make it consistent with what gets reported after blanking, and
what userspace expects.
For the exotic case where some uses multi-track recording on a DVD-RW in
sequential mode, we need to tell apart sequential and restricted overwrite
modes, so keep separate states for them internally.
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Harald Hoyer [Tue, 10 Aug 2010 14:41:24 +0000 (16:41 +0200)]
udev-event.c: rename interface to <src>-<dest>, if <dest> taken
e.g. if eth0 should be eth3 and eth3 is waiting to be renamed,
eth0 was renamed to eth0_rename. The kernel would take eth0 as the name
for a new interface and this new eth0 could also become eth0_rename, if
the target name is also taken. To prevent this name clash, the
interfaces are now renamed to <src>-<dest> and the rename is logged.
Richard Hughes [Mon, 9 Aug 2010 10:41:18 +0000 (11:41 +0100)]
udev-acl: add DDC_DEVICE to the types that are managed
DDC_DEVICEs are control points for high-end monitors such as the
HP DreamColor. The DDC/CI interface allows userspace applications
to upload custom colorspaces and interact with the display without
using the monitor hardware controls.
Yin Kangkai [Fri, 6 Aug 2010 07:08:51 +0000 (15:08 +0800)]
udev: fix compile warning
CC udev/udevd.o
In file included from udev/udev.h:27,
from udev/udevd.c:47:
./libudev/libudev-private.h: In function ‘udev_selinux_setfscreateconat’:
./libudev/libudev-private.h:230: warning: declaration of ‘dirfd’ shadows a global declaration
/usr/include/dirent.h:224: warning: shadowed declaration is here
Signed-off-by: Yin Kangkai <kangkai.yin@intel.com> Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Jan Drzewiecki [Sun, 8 Aug 2010 15:57:47 +0000 (17:57 +0200)]
cdrom_id: Handle pre-MMC2 drives
Those do not yet support the 0x46 "GET CONFIGURATION" support. If we have
those, fall back to the 0x51 "READ DISC INFORMATION" call. This can only
differentiate between CD-RW and CD-R, but first that's better than a complete
detection failure, and second, those old drives likely don't support more
modern media in the first place.
https://launchpad.net/bugs/502143
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Jan Drzewiecki [Sun, 8 Aug 2010 15:47:08 +0000 (17:47 +0200)]
cdrom_id: Fix detection of reblanked DVD+RW and DVD-RAM
Once formatted, DVD+RW and DVD-RAM discs are always reported "complete" by the
drive. Check the if the Volume Descriptor or Volume Descriptor Anchor sectors
are empty, and if so, set the status to blank. If the disc is unformatted the
blank status is maintained and no reads are issued. If the disc is formatted and
read command fails, the status remains set to complete to avoid accidental
blanking.
Bug-Ubuntu: https://launchpad.net/bugs/581925
Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Kay Sievers [Thu, 5 Aug 2010 16:55:57 +0000 (18:55 +0200)]
udev-acl: remove specific device matches from the rules file
We should do only do classes of devices, not individual pieces
of hardware.
There is no way for us to manage this in the long term, and it needs
to be thought through what we want here, but it surely isn't a list of
smartphones in the udev source tarball installed on all systems.
Michal Schmidt [Wed, 4 Aug 2010 09:53:25 +0000 (11:53 +0200)]
udev-acl: really fix ACL assignment in CK events
The previous fix for udev-acl was incomplete. The ACL were not properly
assigned to the new user when switching from root's session because of
the test for 'uid != 0'.
Centralize the special handling of root to a single place (in set_facl).
Kay Sievers [Tue, 3 Aug 2010 13:09:46 +0000 (15:09 +0200)]
udev-acl: properly handle CK change events for root user
mschmidt@redhat.com writes:
> since root is treated specially, it does not do anything!
> udev-acl may want to prevent removing ACLs from root, but
> it must not stop the ACLs being granted to the user of the
> new session.
Martin Pitt [Sun, 1 Aug 2010 19:59:58 +0000 (21:59 +0200)]
keymap: Generalize Samsung keymaps
Fortunato Ventre (voRia) <vorione@gmail.com> reports a lot more Samsung models
which need the "samsung-other" keymap. Instead of eternally playing catchup,
apply it to all Samsung models for now, and keep the two known special cases.
Stefan Richter [Sun, 11 Jul 2010 10:32:12 +0000 (12:32 +0200)]
rules: add more FireWire IDs: Point Grey IIDC; AV/C + vendor unique
1. IIDC cameras from Point Grey use the vendor OUI as Specifier_ID
instead of the 1394 TA's OUI but are otherwise fully compliant to the
IIDC spec. Their device files should be accessible like those of any
other IIDC cameras.
2. Originally, the Software_Version of devices that implement FCP
(IEC 61883-1 Function Control Protocol) was meant to be a bitmap of all
command sets that an FCP capable unit supports. Bitmap flags are
defined for AV/C, CAL, EHS, HAVi, and vendor unique command sets.
Software_Version was revised to be a simple identifier instead, and
devices that support several command sets were meant to instantiate one
unit directory for each command set. Still, some devices with the flags
for AV/C and vendor unique command sets combined were released (but
apparently no devices with any other flag combinations). These rare but
existing AV/C + vendor unique devices need to be accessible just like
plain AV/C devices.
Side notes:
- Many AV/C devices make use of the Vendor Dependent AV/C command, but
this is unrelated to vendor unique FCP command sets.
- Here are all standardized FireWire protocol identifiers that I know
of, listed as Specifier_ID:Software_Version | specifier | protocol.
0x00005e:0x000001 | IANA | IPv4 over 1394 (RFC 2734)
0x00005e:0x000002 | IANA | IPv6 over 1394 (RFC 3146)
0x00609e:0x010483 | INCITS | SBP-2 (or SCSI command sets over SBP-3)
0x00609e:0x0105bb | INCITS | AV/C over SBP-3
0x00a02d:0x010001 | 1394 TA | AV/C (over FCP)
0x00a02d:0x010002 | 1394 TA | CAL
0x00a02d:0x010004 | 1394 TA | EHS
0x00a02d:0x010008 | 1394 TA | HAVi
0x00a02d:0x014000 | 1394 TA | Vendor Unique
0x00a02d:0x014001 | 1394 TA | Vendor Unique and AV/C (over FCP)
0x00a02d:0x000100 | 1394 TA | IIDC 1.04
0x00a02d:0x000101 | 1394 TA | IIDC 1.20
0x00a02d:0x000102 | 1394 TA | IIDC 1.30
0x00a02d:0x0A6BE2 | 1394 TA | DPP 1.0
0x00a02d:0x4B661F | 1394 TA | IICP 1.0
For now we are only interested in udev rules for AV/C and IIDC.
Michael Meeks [Tue, 29 Jun 2010 08:49:31 +0000 (09:49 +0100)]
gudev: respect possibly given LD_LIBRARY_PATH
michael@linux-iwk5:/opt/hgnome/src/udev> make V=1
make --no-print-directory all-recursive
Making all in .
PKG_CONFIG_PATH=./data:$PKG_CONFIG_PATH \
LD_LIBRARY_PATH=./extras/gudev \
/opt/hgnome/bin/g-ir-scanner -v \
--namespace GUdev \
..
./extras/gudev/gudevdevice.c
/opt/hgnome/bin/python: error while loading shared libraries:
libpython2.5.so.1.0: cannot open shared object file: No such file or
directory
make[2]: *** [extras/gudev/GUdev-1.0.gir] Error 127
Ryan Harper [Fri, 25 Jun 2010 13:59:22 +0000 (08:59 -0500)]
Add virtio-blk support to path_id
This patch adds a case handling path_id invoked on a virtio-blk device.
Currently path_id walks the parent path to virtio-pci but doesn't know
that it's the end of the path and exits without building the path (providing no
output resulting in no disk/by-path symlinks to virtio-blk devices).
This patch handles the virtio-pci path and updates the path accordingly.
/lib/udev/path_id --debug /block/vda
udev_device_new_from_syspath: device 0x2300120 has devpath '/devices/virtio-pci/virtio1/block/vda'
udev_device_new_from_syspath: device 0x2300380 has devpath '/devices/virtio-pci/virtio1'
udev_device_new_from_syspath: device 0x2300670 has devpath '/devices/virtio-pci'
ID_PATH=virtio-pci-virtio1
And with the current persistent-storage rules generates:
% ls -al /dev/disk/by-path | grep vda
lrwxrwxrwx. 1 root root 9 Jun 1 22:09 virtio-pci-virtio1 -> ../../vda
Martin Pitt [Fri, 11 Jun 2010 13:14:55 +0000 (15:14 +0200)]
Fix hid2hci rules harder
Commit 2b463cb0 changed the rules to match against hiddev* for all devices in
an attempt to fix Debian #567237/LP #444420. However, this caused regressions
with other devices (e. g. LP #550288) and thus was reverted in commit 8b56ba.
Now use hidraw* for the devices where it's confirmed that they only work with
that, and hiddev* for the others.
Jerone Young [Wed, 2 Jun 2010 06:27:31 +0000 (01:27 -0500)]
Fix wlan key on Inspiron 1010 & 1110
This fixes wlan key on Inspirion 1010 & 1110.
This patch depends on previous patches sent.
The issue with all of these is that they were all Dell mini & it wasn't
noticed till recent that they all did not follow the standard that the
rest of Dell machines follow.
Also to note while this fixes the wlan key sending the proper key press,
work is still needed at the kernel level for complete support.
This is the last patch all the Dell minis have been verified to all have
this issue, and are now covered.
Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
projects / systemd / log