* configure the multipath target with round-robin path selector and
conservative default for a start : yes it makes this release the first
really useful one.
* temporarily disable map creation for single path device due to current
restrictive defaults in the kernel target. Sistina should work it out.
* correct the strncmp logic in blacklist function.
* update the Makefiles to autodetect libgcc.a & gcc includes
"ulibc-style". Factorisation of udevdirs & others niceties
* drop a hint about absent /dev/sd? on failed open() for poor Debian
users who don't imagine their favorite distro with only 16 preconfigured
SCSI device nodes :)
david@fubar.dk [Mon, 8 Dec 2003 17:19:19 +0000 (09:19 -0800)]
[PATCH] D-BUS patch for udev-008
Attached is a patch against udev-008 to send out a D-BUS message when a
device node is added or removed.
Using D-BUS lingo, udev acquires the org.kernel.udev service and sends
out a NodeCreated or NodeDeleted signal on the
org.kernel.udev.NodeMonitor interface. Each signal carries two
parameters: the node in question and the corresponding sysfs path.
[Note: the D-BUS concepts of service, interface, object can be a bit
confusing at first glance]
An example program listening for these messages looks like this
#!/usr/bin/python
import dbus
import gtk
def udev_signal_received(dbus_iface, member, service, object_path, message):
[filename, sysfs_path] = message.get_args_list()
if member=='NodeCreated':
print 'Node %s created for %s'%(filename, sysfs_path)
elif member=='NodeDeleted':
print 'Node %s deleted for %s'%(filename, sysfs_path)
def main():
bus = dbus.Bus(dbus.Bus.TYPE_SYSTEM)
bus.add_signal_receiver(udev_signal_received,
'org.kernel.udev.NodeMonitor', # interface
'org.kernel.udev', # service
'/org/kernel/udev/NodeMonitor') # object
gtk.mainloop()
if __name__ == '__main__':
main()
and this is the output when hot-plugging some usb-storage.
[david@laptop udev-008]$ ~/node_monitor.py
Node /udev/sda created for /block/sda
Node /udev/sda1 created for /block/sda/sda1
Node /udev/sda1 deleted for /block/sda/sda1
Node /udev/sda deleted for /block/sda
The patch requires D-BUS 0.20 or later while the python example program
requires D-BUS from CVS as I only recently applied a patch against the
python bindings.
> > here is a experimental symlink creation patch - for discussion,
> > in which direction we should go.
> > It is possible now to define SYMLINK= after the NAME= in udev.rules.
> > The link is relative to the node, but the path is not optimized now
> > if the node and the link are in the same nested directory.
> > Only one link is supported, cause i need to sleep now :)
> >
> > 06-simple-symlink-creation.diff
> > simple symlink creation
> > reorganized udev-remove to have access to the symlink field
> > subdir creation/removal are functions now
> > udev-test.pl tests for link creation/removal
Here is a new version with relative link target path optimization
an better tests in udev-test.pl:
[PATCH] better allow builds of extras programs under udev
Here is an improved version of the patch that enables builds of the extras
progams for the targets all, clean, install, and uninstall, and passes
down the "prefix" for use by install and uninstall.
This patch enables building of the "extras" programs using the same build
environment as udev (i.e. build with udev's versions of klibc and
sysfsutils).
* implement a reschedule flag in /var/run. Last thing the prog do before
exit is check if a call to multipath was done (but canceled by
/var/run/multipath.run check) during its execution. If so restart the
main loop.
* implement a blacklist of sysfs bdev to not bother with for now (hd,
md, dm, sr, scd, ram, raw). This avoid sending SG_IO to unappropiate
devices.
here is the next update which brings this multipath to the state i'm not
ashamed of it being in udev :)
* drop a libdevmapper copy in extras/multipath; maybe discussions w/
Sistina folks will bring a better solution in the future.
* drop a putchar usage in libdevmapper to compile cleanly with klibc
* drop another such usage of my own in main.c
* massage the Makefile to compile libdevmapper against klibc
* use "ld" to produce the binary rather than "gcc -static"
* stop being stupid w/ uneeded major, minor & dev in main.c:dm_mk_node()
* reverse to creating striped target for now because the multipath
target is more hairy than expected initialy
* push the version code to 009 to be in synch w/ udev
builds & run here.
binary size is 43ko, which is fairly gratifying after all the efforts
I've put to compiling it with klibc :)
I've never seen any project where the documentation is in sync with the
code at this early stage. Nice! So here is the patch to make it extra perfect :)
remove random indent to be consistent
style is "shell style"
s/wildcard/pattern/
mention negation char in character class
While I was adding pattern match to the LABEL method i hit a bug.
We modify a string returned from libsysfs, so with every iteration is is
truncated by one char:
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-ESXS '
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-ESX' with '?IBM-ESXS'
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-ESX'
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-ES' with 'IBM-ESXS?'
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-ES'
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-E' with 'IBM-ES??'
Dec 4 02:27:16 pim udev[23307]: do_label: dev->bus='scsi' sysfs_device->bus='scsi'
Dec 4 02:27:16 pim udev[23307]: do_label: look for device attribute 'vendor'
Dec 4 02:27:16 pim udev[23307]: do_label: xxx 'IBM-E'
Dec 4 02:27:16 pim udev[23307]: do_label: compare attribute 'vendor' value 'IBM-' with 'IBM-ESXSS'
I changed the behavior to remove only the line feed.
03-bug-in-linefeed-removal.diff
remove only the line feed from string not every last char
As promised yesterday, here is a patch to implement a more advanced
pattern matching instead of the simple '*'.
We can remove the "tty"="tty" line from udev.rules now and
replace "tty*" by "tty[0-9]*" to catch only the vc's.
implement pattern matching in namedev
'*' - to match zero or more chars
'?' - to match exactly one char
'[]' - character classes with ranges '[0-9]'and negation [!A]
greg@kroah.com [Wed, 3 Dec 2003 09:08:46 +0000 (01:08 -0800)]
[PATCH] add support for a main udev config file, udev.conf.
the older udev.config file is now called udev.rules.
This allows us to better control configuration values, and move away from
the environment variables.
[PATCH] Add -nodefaultlibs while compiling against klibc
This patch adds -nodefaultlibs to LDFLAGS when compiling udev against
klibc. This fixes the warning that I was getting when using $(LD)=gcc
in the versions after Makefile.klibc disappeared. The problem was that
it was still including a "-lc" in the call to the linker.
The quick patch I sent you yesterday fixes it in one location, but
there are other points in the library that calls sysfs_get_mnt_path. We
need to address all the areas in the library where paths are used. The
following patch is a band-aid until we can get a proper path management
in the library.
On Tuesday 25 November 2003 00:12, Chris Larson wrote:
> udev fails to compile here unless I'm doing a KLIBC build. The reason
> appears to be that the normal limits.h in the gcc inc dir doesn't pull
> in linux/limits.h, whereas the limits.h out in the klibc include dirs
> does. I'd think it'd be best to add a #include <linux/limits.h> to
> udev.h directly, since it uses PATH_MAX.
No, don't include kernel headers directly if you can avoid it.
The problem you are referring to seems to be with old tool chains,
I have the same symptom with my s390 gcc-2.95/glibc-2.1.3.
Including <sys/param.h> instead of <limits.h> seems to fix it.
* removes sg_err.[ch] deps
* makes sure the core code play nice with klibc
* port the sysfs calls to dlist helpers
* links against udev's sysfs (need libsysfs.a & dlist.a)
* finally define DM_TARGET as "multipath" as Joe posted the code today
(not tested yet)
* push version forward (do you want it in sync with udev version?)
libdevmapper doesn't play well with klibc, so I wasn't able to produce a
static binary yet. Help needed here ... as I don't want to fall back to
merge libdevmapper code in the core.
There seems to be a
mismatch in udev and in libsysfs as to what to expect if the mnt point
has a slash on the end or not. If I use the included patch, it breaks
something in udev. If I patch sysfs_get_mnt_path I break udev as well
because what you're expecting. I need to sit down and go through
the library and creaate a rule as to trailing slashes. Adding the env
brought this to light.
Here's the patch to up the library to the sysfsutils-0_3_0 level. The
following changes:
1) adds class name to sysfs_class_device structure
2) adds bus to sysfs_device
3) gets rid of code that made assumptions as to bus addresses being
unique across buses, which isn't the case.
I still owe you:
1) change getpagesize->sysconf. This is in the CVS tree and part of other
changes we're currently testing. Patch will follow.
2) you need a function to get a sysfs_class_device's parent. We hadn't
considered class devices to have parents, the one example of a multilevel
is the block class. We will add this function and send the patch to you.
arnd@arndb.de [Tue, 25 Nov 2003 07:41:40 +0000 (23:41 -0800)]
[PATCH] Add format modifier for devfs like naming
On Monday 24 November 2003 01:29, Greg KH wrote:
> I think with the ability to capture the output of the CALLOUT rule,
> combined with the ability to put format modifiers in the CALLOUT program
> string, we now have everything in place to emulate the existing devfs
> naming scheme. Anyone want to verify this or not?
I would prefer to have the ability of creating partition nodes in devfs
style built-in to udev. Devfs used to call the whole disk e.g.
"/dev/dasd/0123/disk" and the partitions "/dev/dasd/0123/part[1-3]".
This can obviously be done with a CALLOUT rule, but its common enough
to make it a format modifier. AFAIK, this scheme has been used for
ide, scsi and dasd disks, which is about 99% of all disks ever connected
to Linux.
udev kept on segfaulting when it was in use, and not having the time
(and building it with DEBUG=true showing nothing), I have not tracked it
until tonight. Seems like I made a type-o, and forgotten the ':'
between one line's group and permission parameters. Attached patch
should stop the segfault, and warn at that at least.
04-udev.8-tweak-numeric-id-text.diff
o change "return value" to "returned string"
o add textual owner/group example for udev.permissions
o mention klibc compile as special case for udev.permissions
o remove duplicated numeric owner clause
here is a patch for inserting the callout output into NAME=.
ID= supports the usual wildcard to compare with the output.
I've moved all wildcard matching to a function cause this was the third occurrence.
Also attached is the last whitespace cleanup and debug text corrections.
The callout patch depends on the whitespace patch.
olh@suse.de [Sun, 23 Nov 2003 13:58:21 +0000 (05:58 -0800)]
[PATCH] static klibc udev does not link against crt0.o
On Wed, Nov 19, Greg KH wrote:
> > I did 'make KLIBC=true' in the current bk tree.
>
> try 'make -f Makefile.klibc' in the current tree. For some reason I
> couldn't figure out how to have Makefile work for both KLIBC=true and
> KLIBC=false. But I didn't try too hard :)
I dont understand that.
please do rm -f Makefile.klibc; apply this patch and tell me what fails.
works for me.
Nov 20 02:35:20 pim udev[30422]: get_major_minor: found major = 81, minor = 0
Nov 20 02:35:20 pim udev[30422]: exec_callout: callout to /bin/echo -n xxx
Nov 20 02:35:20 pim udev[30422]: exec_callout: callout returned 'xxx'
Nov 20 02:35:20 pim udev[30422]: get_attr: kernel number appended: 0
The feature is really nice, but the maximum argument count is hard coded to 8.
[PATCH] namedev.c - change order of fields in CALLOUT
I want to bring the CALLOUT field ordering in line with the other
methods, cause the current parsing relies on the ordering it's good
to have it like the others. The BUS= is now the first expected field.
Also made the last two remaining field names to uppercase and the man page
callout example is updated.
here is mainly a whitespace cleanup for namedev.c. I changed the
dbg_parse() output a bit for better readability:
current:
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1'
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER temp='/2-1.1' id='00:07.1'
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER temp='/2-1' id='00:07.1'
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1'
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER temp='/2-1.1' id='00:0b.0'
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER temp='/2-1' id='00:0b.0'
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1'
Nov 19 19:00:59 pim udev[25582]: do_number: NUMBER temp='/2-1.1' id='2-1.1'
Nov 19 19:00:59 pim udev[25582]: do_number: device id '2-1.1' becomes 'webcam%n' - owner='', group ='', mode=0
becomes:
Nov 19 19:23:40 pim udev[26091]: do_number: search '00:07.1' in '/2-1.1', path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1'
Nov 19 19:23:40 pim udev[26091]: do_number: search '00:07.1' in '/2-1', path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1'
Nov 19 19:23:40 pim udev[26091]: do_number: search '00:0b.0' in '/2-1.1', path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1'
Nov 19 19:23:40 pim udev[26091]: do_number: search '00:0b.0' in '/2-1', path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1'
Nov 19 19:23:40 pim udev[26091]: do_number: search '2-1.1' in '/2-1.1', path='/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1'
Nov 19 19:23:40 pim udev[26091]: do_number: found id '2-1.1', 'video0' becomes 'webcam%n' - owner='', group ='', mode=0
[PATCH] apply permissions.conf support for wildcard and default name
Permissions given in udev.permissions are not applied if no METHOD from
udev.config is found. I've added do_kernelname() to scan for known
permissions if we only use the default method.
Simple support for wildcards is also added:
#name:user:group:mode
hdb*:2702:2702:0660
results in:
drwxr-xr-x 2 root root 240 Nov 19 03:45 .
drwxr-xr-x 23 root root 528 Nov 17 03:36 ..
brw-r--r-- 1 root root 3, 0 Nov 19 03:45 hda
brw-r--r-- 1 root root 3, 1 Nov 19 03:45 hda1
brw-r--r-- 1 root root 3, 2 Nov 19 03:45 hda2
brw-r--r-- 1 root root 3, 4 Nov 19 03:45 hda4
brw-r----- 1 kay kay 3, 64 Nov 19 03:45 hdb
brw-r----- 1 kay kay 3, 65 Nov 19 03:45 hdb1
brw-r--r-- 1 root root 22, 0 Nov 19 03:45 hdc
crw-r--r-- 1 root root 81, 0 Nov 19 03:34 webcam0
projects / systemd / log