[PATCH] kprobes: fix race in recovery of reentrant probe
There is a window where a probe gets removed right after the probe is hit
on some different cpu. In this case probe handlers can't find a matching
probe instance related to break address. In this case we need to read the
original instruction at break address to see if that is not a break/int3
instruction and recover safely.
Previous code had a bug where we were not checking for the above race in
case of reentrant probes and the below patch fixes this race.
Tested on IA64, Powerpc, x86_64.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] kprobes: fix unloading of self probed module
When a kprobes modules is written in such a way that probes are inserted on
itself, then unload of that moudle was not possible due to reference
couning on the same module.
The below patch makes a check and incrementes the module refcount only if
it is not a self probed module.
We need to allow modules to probe themself for kprobes performance
measurements
This patch has been tested on several x86_64, ppc64 and IA64 architectures.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jan Kara [Wed, 11 Jan 2006 20:17:40 +0000 (12:17 -0800)]
[PATCH] reiserfs: fix assertion failure in reiserfs+journaled quotas
Sometimes we call do_journal_end() with t_refcount == 0. If quota is
turned on and we happen to have some inode with preallocation bad things
happen as we try to use the current handle for quota operations. Checks
for t_refcount in journal_begin() fail and we Oops. We raise t_refcount to
make those checks happy. We should not cause any bad as all the needed
quota blocks should be already attached to the transaction (they were
attached to the transaction when we allocated those preallocation blocks).
Signed-off-by: Jan Kara <jack@suse.cz> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Vivek Goyal [Wed, 11 Jan 2006 20:17:37 +0000 (12:17 -0800)]
[PATCH] kdump: vmcore compilation warning fix
o fs/proc/vmcore.c compilation gives warnings on ppc64. The reason being
that u64 is defined as unsigned long hence u64* is not same as loff_t*
and compiler cribs.
o Changed the parameter type to u64* instead of loff_t* to resolve the
conflict.
There's an ifdef in cs89x0.c that seems to have been the wrong way round
since it was merged (and noone seems to have noticed) -- the IXDP2x01
doesn't support ISA-style DMA, but when building for IXDP2x01, cs89x0's
ALLOW_DMA is set to 1, and when building for another platform, ALLOW_DMA is
set to 0.
Alan Cox [Wed, 11 Jan 2006 20:17:32 +0000 (12:17 -0800)]
[PATCH] Allow reading CMOS day of week register
Someone wanted access to this usually unused (and unused by Linux) value
for the day of week. Existing kernels have the field in the struct but
return 0 always. This updates the kernel to fill in the field. The usual
case of 'not set' conveniently is 0.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tore Anderson [Wed, 11 Jan 2006 20:17:31 +0000 (12:17 -0800)]
[PATCH] ext3: fix documentation of online resizing
Undocument the non-working resize= mount option in ext3, and add some
references to the ext2resize package instead, which appears to be the only
proper way of doing online resizing of ext3 filesystems.
Signed-off-by: Tore Anderson <tore@fud.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Akinobu Mita [Wed, 11 Jan 2006 20:17:31 +0000 (12:17 -0800)]
[PATCH] doc: refer to kdump in oops-tracing.txt
Kdump has been merged and supported on several architectures. It is better
to encourage to use kdump rather than non standard kernel crash dump
patches.
Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Wed, 11 Jan 2006 20:17:28 +0000 (12:17 -0800)]
[PATCH] uml: fix debug output on x86_64
The debug-stub patch was broken on x86_64 because it thinks the frame size
there is 168 words. In reality, it is 168 bytes, and using HOST_FRAME_SIZE,
which is expressed in consistent units across architectures, fixes this.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Wed, 11 Jan 2006 20:17:26 +0000 (12:17 -0800)]
[PATCH] uml: update Kconfig help
The MODE_TT help was a little outdated. This updates it in light of the
existence of skas0 mode. It's also turned off by default since it is mostly
obsoleted by skas0 mode.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Wed, 11 Jan 2006 20:17:23 +0000 (12:17 -0800)]
[PATCH] uml: fix missing KBUILD_BASENAME
2.6.15-mm1 caused kernel-offsets.c to stop compiling with a syntax error in a
header. The problem was with KBUILD_BASENAME, which didn't get a definition
with the by-hand compilation in the main UML Makefile.
This was OK before since the expansion was syntactically the same as the
KBUILD_BASENAME token. With -mm1, the expansion is now a quote-delimited
string, so there needs to be a definition of it.
Since kernel-offsets.c is basically the same as other arches' asm-offsets.c,
and those seem to build OK, this patch turns kernel-offsets.c into
asm-offsets.c. kernel-offsets.c is in arch/um/sys-$(SUBARCH), i.e. sys-i386
and sys-x86_64, while kbuild expects it to be in arch/um/kernel.
kernel-offsets.c is moved to
arch/um/include/sysdep-$(SUBARCH)/kernel-offsets.h, which is included by
arch/um/kernel/asm-offsets.c. With that, include/asm-um/asm-offsets.h is
generated automatically. kernel-offsets.h continues to exist because it needs
to be accessible to userspace UML code, and include/asm-um isn't. So, a
symlink is made from arch/um/include/kernel-offsets.h to
include/asm-um/asm-offsets.h.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kris Katterjohn [Wed, 11 Jan 2006 23:56:43 +0000 (15:56 -0800)]
[NET]: Remove more unneeded typecasts on *malloc()
This removes more unneeded casts on the return value for kmalloc(),
sock_kmalloc(), and vmalloc().
Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David Woodhouse [Wed, 11 Jan 2006 23:53:04 +0000 (15:53 -0800)]
[IPV6]: Avoid calling ip6_xmit() with NULL sk
The ip6_xmit() function now assumes that its sk argument is non-NULL,
which isn't currently true when TCPv6 code is sending RST or ACK
packets. This fixes that code to use a socket of its own for sending
such packets, as TCPv4 does. (Thanks Andi for the pointer).
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David Woodhouse [Wed, 11 Jan 2006 14:41:26 +0000 (14:41 +0000)]
[PATCH] fix/simplify mutex debugging code
Let's switch mutex_debug_check_no_locks_freed() to take (addr, len) as
arguments instead, since all its callers were just calculating the 'to'
address for themselves anyway... (and sometimes doing so badly).
Paul Mackerras [Wed, 11 Jan 2006 05:27:21 +0000 (16:27 +1100)]
powerpc/32: Fix compile error caused by pud_t/pgt_t confusion
PPC32 is still using asm-generic/4level-fixup.h, but asm-powerpc/page.h
was defining pud_t and pgd_t. Depending on the order in which files
got included, this could result in a compilation error. Tweak the ifdef
so that page.h doesn't try to define pud_t on ppc32 (which uses 2-level
page tables).
Michael Ellerman [Wed, 11 Jan 2006 04:27:24 +0000 (15:27 +1100)]
[PATCH] powerpc: Add ibm,pft-size to iSeries device tree
To make iSeries just a teensy bit less special, create ibm,pft-size properties
in the iSeries device tree. We can then rely on htab_dt_scan_pftsize() to set
ppc64_pft_size for us.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Kumar Gala [Wed, 11 Jan 2006 03:43:56 +0000 (21:43 -0600)]
[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx support
Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc. Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Haren Myneni [Wed, 11 Jan 2006 03:25:25 +0000 (19:25 -0800)]
[PATCH] powerpc: fix for compile problem in kdump code when SMP disabled
This patch fixes the compilation error (shown below) when CONFIG_SMP=n.
arch/powerpc/kernel/crash.c: In function `crash_kexec_prepare_cpus':
arch/powerpc/kernel/crash.c:236: error: implicit declaration of
function `smp_release_cpus'
Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Wed, 11 Jan 2006 02:16:44 +0000 (13:16 +1100)]
[PATCH] powerpc/64: per cpu data optimisations
The current ppc64 per cpu data implementation is quite slow. eg:
lhz 11,18(13) /* smp_processor_id() */
ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */
ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */
sldi 11,11,3 /* form index into __per_cpu_offset */
mr 10,9
ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */
ldx 0,10,9 /* load per cpu data */
5 loads for something that is supposed to be fast, pretty awful. One
reason for the large number of loads is that we have to synthesize 2
64bit constants (per_cpu__variable_name and __per_cpu_offset).
By putting __per_cpu_offset into the paca we can avoid the 2 loads
associated with it:
ld 11,56(13) /* paca->data_offset */
ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */
ldx 0,9,11 /* load per cpu data
Longer term we can should be able to do even better than 3 loads.
If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset
was in a register we could cut it down to one load. A suggestion from
Rusty is to use gcc's __thread extension here. In order to do this we
would need to free up r13 (the __thread register and where the paca
currently is). So far Ive had a few unsuccessful attempts at doing that :)
The patch also allocates per cpu memory node local on NUMA machines.
This patch from Rusty has been sitting in my queue _forever_ but stalled
when I hit the compiler bug. Sorry about that.
Finally I also only allocate per cpu data for possible cpus, which comes
straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128)
and 4 possible cpus we see some nice gains:
total used free shared buffers cached
Mem: 4012228 212860 3799368 0 0 162424
total used free shared buffers cached
Mem: 4016200 212984 3803216 0 0 162424
A saving of 3.75MB. Quite nice for smaller machines. Note: we now have
to be careful of per cpu users that touch data for !possible cpus.
At this stage it might be worth making the NUMA and possible cpu
optimisations generic, but per cpu init is done so early we have to be
careful that all architectures have their possible map setup correctly.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Wed, 11 Jan 2006 00:54:09 +0000 (11:54 +1100)]
[PATCH] powerpc: Make early debugging configurable via Kconfig
This patch adds Kconfig entries to control the early debugging options,
currently in setup_64.c.
Doing this via Kconfig rather than #defines means you can have one source tree,
which is buildable for multiple platforms - and you can enable the correct
early debug option for each platform via .config.
I made udbg_early_init() a static inline because otherwise GCC is to daft to
optimise it away when debugging is off.
Now that we have udbg_init_rtas() we can make call_rtas_display_status* static.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Wed, 11 Jan 2006 00:54:08 +0000 (11:54 +1100)]
[PATCH] powerpc: Early debugging support for iSeries
Connect iSeries up to the standard early debugging infrastructure.
To actually use this you need to enable the iSeries early debugging
in setup_64.c. Then after the messages are logged hit Ctrl-x Ctrl-x on
your console to dump the Hypervisor console buffer.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
linas [Tue, 10 Jan 2006 21:18:16 +0000 (15:18 -0600)]
[PATCH] PCI Hotplug/powerpc: module build break
The RPAPHP hoplug driver will not build as a module, because it calls
on a pcibios routine which is not exported. This exports the symbol.
Problem reported by Olaf Hering <olh@suse.de>
Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Thibaut VARENE [Wed, 11 Jan 2006 01:48:01 +0000 (20:48 -0500)]
[PARISC] pdc_stable: More robust sysfs error checking
pdc_stable 0.10:
As mentioned on LKML, pdc_stable wasn't checky enough on the return
values of some calls. This patch makes it more robust to errors when
registering objects in sysfs.
Grant Grundler [Wed, 11 Jan 2006 01:47:57 +0000 (20:47 -0500)]
[PARISC] Fix BLK_BOUNCE_HIGH on parisc by initializing max_low_pfn
max_low_pfn was not being set in arch/parisc/mm/init.c, causing severe
problems whenever anything tried to use BLK_BOUNCE_HIGH. Set it to
max_pfn like other similar architectures do.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Matthew Wilcox [Wed, 11 Jan 2006 01:47:53 +0000 (20:47 -0500)]
[PARISC] Fix GSC graphics cards with 64MB regions
Make knapps work with its 64MB gfx card. I probably just broke another
machine in the process, but assuming 64MB when 64MB aligned is probably
safer than assuming 32MB all the time.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Kyle McMartin [Wed, 11 Jan 2006 01:47:52 +0000 (20:47 -0500)]
[PARISC] Fix and cleanup ioremap.c to work with 4level-fixup.h
Fixup ioremap a bit. It seems to work on 32-bit kernels, but fails
miserably on the first ioremapped access on 64-bit kernels. Also, having
STI enabled causes it to fail. Probably because we're passing an ioremapped
region to a real-mode STI call...
Helge Deller [Wed, 11 Jan 2006 01:47:50 +0000 (20:47 -0500)]
[PARISC] Fix Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop
Fix irq-off-by-one for Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop.
We just DECLARE_PCI_FIXUP_ENABLE as it is unlikely that this will be
found in any other parisc system.
Matthew Wilcox [Wed, 11 Jan 2006 01:47:49 +0000 (20:47 -0500)]
[PARISC] Make local cache flushes take a void *
Make flush_data_cache_local, flush_instruction_cache_local and
flush_tlb_all_local take a void * so they don't have to be cast
when using on_each_cpu(). This becomes a problem when on_each_cpu
is a macro (as it is in current -mm).
Also move the prototype of flush_tlb_all_local into tlbflush.h and
remove its declaration from .c files.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Jesper Juhl [Wed, 11 Jan 2006 00:51:26 +0000 (01:51 +0100)]
missing printk loglevel and tiny tiny whitespace change in binfmt_elf()
Patch adds a mising printk loglevel (I think KERN_WARNING is appropriate
here) in fs/binfmt_elf.c, and while I was there I made some tiny tiny tiny
adjustments to whitespacing in the neighborhood.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
Jesper Juhl [Wed, 11 Jan 2006 00:50:28 +0000 (01:50 +0100)]
add missing printk loglevel in mm/swapfile.c
in mm/swapfile.c a printk() is missing a loglevel. I believe the proper
loglevel for this situation is KERN_ERR, so that's what the patch below
sets -if you agree, please apply.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
Jesper Juhl [Wed, 11 Jan 2006 00:48:08 +0000 (01:48 +0100)]
Tiny esthetic changes to Documentation/laptop-mode.txt
Here's a tiny patch making a few esthetic changes to
Documentation/laptop-mode.txt
To me this patch makes sense, but feel free to disagree, I don't feel
strongly about it at all.
It changes a single URL to its strictly correct form (directories should
end in /), and it makes the arguments to main in an included example
program follow convention and be named argc and argv.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
This memset() line was indented with seven spaces, this patch fixes
it to use a tab instead. Yes, very trivial but it's the third time
I have to look at this line..
Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Adrian Bunk <bunk@stusta.de>
Ingo Molnar [Tue, 10 Jan 2006 21:07:44 +0000 (22:07 +0100)]
[PATCH] fix i386 mutex fastpath on FRAME_POINTER && !DEBUG_MUTEXES
Call the mutex slowpath more conservatively - e.g. FRAME_POINTERS can
change the calling convention, in which case a direct branch to the
slowpath becomes illegal. Bug found by Hugh Dickins.
projects / linux-2.6 / log