Heiko Carstens [Sun, 25 Jun 2006 12:49:10 +0000 (05:49 -0700)]
[PATCH] cpu hotplug: fix CPU_UP_CANCEL handling
If a cpu hotplug callback fails on CPU_UP_PREPARE, all callbacks will be
called with CPU_UP_CANCELED. A few of these callbacks assume that on
CPU_UP_PREPARE a pointer to task has been stored in a percpu array. This
assumption is not true if CPU_UP_PREPARE fails and the following calls to
kthread_bind() in CPU_UP_CANCELED will cause an addressing exception
because of passing a NULL pointer.
Frode Isaksen [Sun, 25 Jun 2006 12:49:09 +0000 (05:49 -0700)]
[PATCH] fs: sys_poll with timeout -1 bug fix
If you do a poll() call with timeout -1, the wait will be a big number
(depending on HZ) instead of infinite wait, since -1 is passed to the
msecs_to_jiffies function.
Signed-off-by: Frode Isaksen <frode.isaksen@gmail.com> Acked-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:07 +0000 (05:49 -0700)]
[PATCH] CCISS: tidy up product table indentation
Make each one fit on a line so it's easier to read. I re-ordered
COMPAQ_CISSC/0x4091, which was out of order. I double-checked these, but it
would be good if you'd also check them to make sure I didn't miss any.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:06 +0000 (05:49 -0700)]
[PATCH] CCISS: run through Lindent
cciss is full of inconsistent style ("for (" vs. "for(", lines that end with
whitespace, lines beginning with a mix of spaces & tabs, etc).
This patch changes only whitespace.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:05 +0000 (05:49 -0700)]
[PATCH] CCISS: remove parens around return values
Typical Linux style is "return -EINVAL", not "return(-EINVAL)".
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:04 +0000 (05:49 -0700)]
[PATCH] CCISS: fix a few spelling errors
Fix a few spelling errors.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:03 +0000 (05:49 -0700)]
[PATCH] CCISS: use ARRAY_SIZE without intermediates
It's easier to verify loop bounds if the array name is mentioned the for()
statement that steps through the array.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:03 +0000 (05:49 -0700)]
[PATCH] CCISS: announce cciss%d devices with PCI address/IRQ/DAC info
We already print "cciss: using DAC cycles" or similar for every adapter found:
why not just identify the device we're talking about and include other useful
information?
Jeff Garzik <jeff@garzik.org>:
Although this patch is correct, I would consider using dev_printk() rather
than referencing pci_name() in printk() arguments.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:02 +0000 (05:49 -0700)]
[PATCH] CCISS: request all PCI resources
We should call pci_request_regions() to claim all resources the device
decodes. Previously, we claimed only the I/O port range.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 25 Jun 2006 12:49:01 +0000 (05:49 -0700)]
[PATCH] CCISS: disable device when returning failure
If something fails after we call pci_enable_device(), we should call
pci_disable_device() before returning the failure.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rob Landley [Sun, 25 Jun 2006 12:49:00 +0000 (05:49 -0700)]
[PATCH] Initramfs docs update
New section on creating an external initramfs image using cpio (with
script), a warning about bad advice in the cpio man page, a bit of
debugging advice (hello world and rdinit=/bin/sh), and a few minor tweaks
to other parts of it.
Signed-off-by: Rob Landley <rob@landley.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sesterhenn [Sun, 25 Jun 2006 12:48:57 +0000 (05:48 -0700)]
[PATCH] Remove needless checks in fs/9p/vfs_inode.c
coverity found two needless checks in vfs_inode.c (cid #1165 and #1164)
In both cases inode is always NULL when we goto error; either because it
is still initialized to NULL or is set to NULL explicitly. This patch
simply removes these checks to save some code.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@lanl.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 25 Jun 2006 12:48:55 +0000 (05:48 -0700)]
[PATCH] kernel-doc: warn on malformed function docs.
When the verbose (-v) option is used with scripts/kernel-doc, this option
reports when the kernel-doc format is malformed and apparently contains
function description lines before function parameters. In these cases, the
kernel-doc script will print something like: Warning(filemap.c:335):
contents before sections
I have fixed the problems in mm/filemap.c and added lots of kernel-doc to
that file (posted to the linux-mm mailing list Mon. 2006-June-12).
The real goal (as requested by Andrew Morton) is to allow the short
function description to be more than one line long. This patch is both a
kernel-doc checker and a tool en route to that goal.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Miklos Szeredi [Sun, 25 Jun 2006 12:48:55 +0000 (05:48 -0700)]
[PATCH] fuse: scramble lock owner ID
VFS uses current->files pointer as lock owner ID, and it wouldn't be
prudent to expose this value to userspace. So scramble it with XTEA using
a per connection random key, known only to the kernel. Only one direction
needs to be implemented, since the ID is never sent in the reverse
direction.
The XTEA algorithm is implemented inline since it's simple enough to do so,
and this adds less complexity than if the crypto API were used.
Miklos Szeredi [Sun, 25 Jun 2006 12:48:54 +0000 (05:48 -0700)]
[PATCH] fuse: add request interruption
Add synchronous request interruption. This is needed for file locking
operations which have to be interruptible. However filesystem may implement
interruptibility of other operations (e.g. like NFS 'intr' mount option).
Miklos Szeredi [Sun, 25 Jun 2006 12:48:52 +0000 (05:48 -0700)]
[PATCH] fuse: ensure FLUSH reaches userspace
All POSIX locks owned by the current task are removed on close(). If the
FLUSH request resulting initiated by close() fails to reach userspace, there
might be locks remaining, which cannot be removed.
The only reason it could fail, is if allocating the request fails. In this
case use the request reserved for RELEASE, or if that is currently used by
another FLUSH, wait for it to become available.
Miklos Szeredi [Sun, 25 Jun 2006 12:48:52 +0000 (05:48 -0700)]
[PATCH] fuse: add POSIX file locking support
This patch adds POSIX file locking support to the fuse interface.
This implementation doesn't keep any locking state in kernel. Unlocking on
close() is handled by the FLUSH message, which now contains the lock owner id.
Mandatory locking is not supported. The filesystem may enfoce mandatory
locking in userspace if needed.
Miklos Szeredi [Sun, 25 Jun 2006 12:48:51 +0000 (05:48 -0700)]
[PATCH] fuse: add control filesystem
Add a control filesystem to fuse, replacing the attributes currently exported
through sysfs. An empty directory '/sys/fs/fuse/connections' is still created
in sysfs, and mounting the control filesystem here provides backward
compatibility.
Advantages of the control filesystem over the previous solution:
- allows the object directory and the attributes to be owned by the
filesystem owner, hence letting unpriviled users abort the
filesystem connection
- does not suffer from module unload race
[akpm@osdl.org: fix this fs for recent dhowells depredations]
[akpm@osdl.org: fix 64-bit printk warnings] Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Miklos Szeredi [Sun, 25 Jun 2006 12:48:50 +0000 (05:48 -0700)]
[PATCH] fuse: no backgrounding on interrupt
Don't put requests into the background when a fatal interrupt occurs while the
request is in userspace. This removes a major wart from the implementation.
Backgrounding of requests was introduced to allow breaking of deadlocks.
However now the same can be achieved by aborting the filesystem through the
'abort' sysfs attribute.
This is a change in the interface, but should not cause problems, since these
kinds of deadlocks never happen during normal operation.
David Howells [Sun, 25 Jun 2006 12:48:49 +0000 (05:48 -0700)]
[PATCH] Another couple of alterations to the memory barrier doc
Make another couple of alterations to the memory barrier document following
suggestions by Alan Stern and in co-operation with Paul McKenney:
(*) Rework the point of introduction of memory barriers and the description
of what they are to reiterate why they're needed.
(*) Modify a statement about the use of data dependency barriers to note that
other barriers can be used instead (as they imply DD-barriers).
Signed-off-by: David Howells <dhowells@redhat.com> Acked-By: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sesterhenn [Sun, 25 Jun 2006 12:48:48 +0000 (05:48 -0700)]
[PATCH] More !tty cleanups in drivers/char
Another bunch of checks in the char drivers .put_char() and .write()
routines, where tty can never be NULL. This patch removes these checks to
save some code. Coverity choked at those with the following bug ids:
Ian Kent [Sun, 25 Jun 2006 12:48:47 +0000 (05:48 -0700)]
[PATCH] autofs4: need to invalidate children on tree mount expire
I've found a case where invalid dentrys in a mount tree, waiting to be
cleaned up by d_invalidate, prevent the expected expire.
In this case dentrys created during a lookup for which a mount fails or has
no entry in the mount map contribute to the d_count of the parent dentry.
These dentrys may not be invalidated prior to comparing the interanl usage
count of valid autofs dentrys against the dentry d_count which makes a
mount tree appear busy so it doesn't expire.
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sesterhenn [Sun, 25 Jun 2006 12:48:46 +0000 (05:48 -0700)]
[PATCH] Clean up char/esp.c
coverity choked at another two !tty checks, in places where tty can
never be NULL. Since it removes some code we should remove
these checks. (Coverity ids #763,#762)
Signed-off-by Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sesterhenn [Sun, 25 Jun 2006 12:48:45 +0000 (05:48 -0700)]
[PATCH] Cyclades Cleanup
coverity choked at two !tty checks, in places where tty can never be NULL.
Since it removes some code we should remove these checks. (Coverity ids
#763,#762)
[akpm@osdl.org: even cleaner!] Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul E. McKenney [Sun, 25 Jun 2006 12:48:44 +0000 (05:48 -0700)]
[PATCH] RCU documentation: self-limiting updates and call_rcu()
An update to the RCU documentation calling out the
self-limiting-update-rate advantages of synchronize_rcu(), and describing
how to use call_rcu() in a way that results in self-limiting updates.
Self-limiting updates are important to avoiding RCU-induced OOM in face of
denial-of-service attacks.
Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Wu Fengguang [Sun, 25 Jun 2006 12:48:43 +0000 (05:48 -0700)]
[PATCH] readahead: backoff on I/O error
Backoff readahead size exponentially on I/O error.
Michael Tokarev <mjt@tls.msk.ru> described the problem as:
[QUOTE]
Suppose there's a CD-rom with a scratch/etc, one sector is unreadable.
In order to "fix" it, one have to read it and write to another CD-rom,
or something.. or just ignore the error (if it's just a skip in a video
stream). Let's assume the unreadable block is number U.
But current behavior is just insane. An application requests block
number N, which is before U. Kernel tries to read-ahead blocks N..U.
Cdrom drive tries to read it, re-read it.. for some time. Finally,
when all the N..U-1 blocks are read, kernel returns block number N
(as requested) to an application, successefully.
Now an app requests block number N+1, and kernel tries to read
blocks N+1..U+1. Retrying again as in previous step.
And so on, up to when an app requests block number U-1. And when,
finally, it requests block U, it receives read error.
So, kernel currentry tries to re-read the same failing block as
many times as the current readahead value (256 (times?) by default).
This whole process already killed my cdrom drive (I posted about it
to LKML several months ago) - literally, the drive has fried, and
does not work anymore. Ofcourse that problem was a bug in firmware
(or whatever) of the drive *too*, but.. main problem with that is
current readahead logic as described above.
[/QUOTE]
Which was confirmed by Jens Axboe <axboe@suse.de>:
[QUOTE]
For ide-cd, it tends do only end the first part of the request on a
medium error. So you may see a lot of repeats :/
[/QUOTE]
With this patch, retries are expected to be reduced from, say, 256, to 5.
Randy Dunlap [Sun, 25 Jun 2006 12:48:40 +0000 (05:48 -0700)]
[PATCH] advansys section fixes
Priority: not critical.
Mark 3 functions __init. Saves a little memory.
This makes these functions' calls to AdvWaitEEPCmd() (which is __init)
be clean (i.e., eliminates text -> init -> text call chain).
Fix multiple section mismatch warnings:
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a22) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a4e) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a79) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7aa2) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7abb) and 'AdvSet38C0800EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7ae0) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b0c) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b37) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b60) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b79) and 'AdvSet38C1600EEPConfig'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7b9e) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bca) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bf5) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c1e) and 'AdvExeScsiQueue'
WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c37) and 'AdvExeScsiQueue'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 25 Jun 2006 12:48:39 +0000 (05:48 -0700)]
[PATCH] char/ip2: more section fixes (replacement)
Priority: tossup.
In theory some of these (previously) __init functions could be called
after init, but that problem has not been observed AFAIK.
There were 2 cases of cleanup_module() (module_exit) calling __init
functions (clear_requested_irq() & have_requested_irq()).
These are more serious, but still not observed AFAIK.
Fix sections mismatch:
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'cleanup_module' (at offset 0x228b) and 'ip2_loadmain'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'cleanup_module' (at offset 0x22ae) and 'ip2_loadmain'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2501) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x25de) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2698) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2922) and 'set_irq'
WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x299e) and 'set_irq'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 25 Jun 2006 12:48:38 +0000 (05:48 -0700)]
[PATCH] cdrom/mcdx: section fixes
Priority: not critical.
Make __mcdx_init() __init and static. Saves a little memory.
Fix section mismatch warning and make the function static while there:
WARNING: drivers/cdrom/mcdx.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x8be) and 'mcdx_transfer'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 25 Jun 2006 12:48:38 +0000 (05:48 -0700)]
[PATCH] trident fb section fixes
Priority: not critical.
Change 3 functions from __init to __devinit.
Could be an init/probe problem in theory, but not observed, so not
high priority IMO.
Fix section mismatch warnings:
WARNING: drivers/video/tridentfb.o - Section mismatch: reference to .init.text: from .text between 'trident_pci_probe' (at offset 0x1aad) and 'trident_pci_remove'
WARNING: drivers/video/tridentfb.o - Section mismatch: reference to .init.text: from .text between 'trident_pci_probe' (at offset 0x1b22) and 'trident_pci_remove'
WARNING: drivers/video/tridentfb.o - Section mismatch: reference to .init.text: from .text between 'trident_pci_probe' (at offset 0x1b31) and 'trident_pci_remove'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 25 Jun 2006 12:48:37 +0000 (05:48 -0700)]
[PATCH] wan/sdla section fixes
netdev->set_config can be called at any time, so these references
to __initdata would be a real problem.
However, problem has not been observed AFAIK.
Fix section mismatch warnings:
WARNING: drivers/net/wan/sdla.o - Section mismatch: reference to .init.data: from .text between 'sdla_set_config' (at offset 0x1b8e) and 'sdla_stats'
WARNING: drivers/net/wan/sdla.o - Section mismatch: reference to .init.data: from .text between 'sdla_set_config' (at offset 0x1e76) and 'sdla_stats'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Peter Staubach [Sun, 25 Jun 2006 12:48:36 +0000 (05:48 -0700)]
[PATCH] ftruncate does not always update m/ctime
In the course of trying to track down a bug where a file mtime was not
being updated correctly, it was discovered that the m/ctime updates were
not quite being handled correctly for ftruncate() calls.
Quoth SUSv3:
open(2):
If O_TRUNC is set and the file did previously exist, upon
successful completion, open() shall mark for update the st_ctime
and st_mtime fields of the file.
truncate(2):
Upon successful completion, if the file size is changed, this
function shall mark for update the st_ctime and st_mtime fields
of the file, and the S_ISUID and S_ISGID bits of the file mode
may be cleared.
ftruncate(2):
Upon successful completion, if fildes refers to a regular file,
the ftruncate() function shall mark for update the st_ctime and
st_mtime fields of the file and the S_ISUID and S_ISGID bits of
the file mode may be cleared. If the ftruncate() function is
unsuccessful, the file is unaffected.
The open(O_TRUNC) and truncate cases were being handled correctly, but the
ftruncate case was being handled like the truncate case. The semantics of
truncate and ftruncate don't quite match, so ftruncate needs to be handled
slightly differently.
The attached patch addresses this issue for ftruncate(2).
My thanx to Stephen Tweedie and Trond Myklebust for their help in
understanding the situation and semantics.
Signed-off-by: Peter Staubach <staubach@redhat.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
akpm@osdl.org [Sun, 25 Jun 2006 12:48:35 +0000 (05:48 -0700)]
[PATCH] N32 sigset and __COMPAT_ENDIAN_SWAP__
I'm testing glibc on MIPS64, little-endian, N32, O32 and N64 multilibs.
Among the NPTL test failures seen are some arising from sigsuspend problems
for N32: it blocks the wrong signals, so SIGCANCEL (SIGRTMIN) is blocked
despite glibc's carefully excluding it from sets of signals to block.
Specifically, testing suggests it blocks signal N^32 instead of signal N,
so (in the example tested) blocking SIGUSR1 (17) blocks signal 49 instead.
glibc's sigset_t uses an array of unsigned long, as does the kernel.
In both cases, signal N+1 is represented as
(1UL << (N % (8 * sizeof (unsigned long)))) in word number
(N / (8 * sizeof (unsigned long))).
Thus the N32 glibc uses an array of 32-bit words and the N64 kernel uses an
array of 64-bit words. For little-endian, the layout is the same, with
signals 1-32 in the first 4 bytes, signals 33-64 in the second, etc.; for
big-endian, userspace has that layout while in the kernel each 8 bytes have
the two halves swapped from the userspace layout.
The N32 sigsuspend syscall uses sigset_from_compat to convert the userspace
sigset to kernel format. If __COMPAT_ENDIAN_SWAP__ is *not* set, this uses
logic of the form
to convert the userspace sigset to a kernel one. This looks correct to me
for both big and little endian, given that in userspace compat->sig[1] will
represent signals 33-64, and so will the high 32 bits of set->sig[0] in the
kernel. If however __COMPAT_ENDIAN_SWAP__ *is* set, as it is for
__MIPSEL__, it uses
which seems incorrect for both big and little endian, and would
explain the observed symptoms.
This code is the only use of __COMPAT_ENDIAN_SWAP__, so if incorrect
then that macro serves no purpose, in which case something like the
following patch would seem appropriate to remove it.
Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 25 Jun 2006 12:48:29 +0000 (05:48 -0700)]
[PATCH] checkstack: print module names
Finding "init_module" high stack usage problems is challenging when there
are over 1600 "init_module" functions in the kernel tree, so make
checkstack.pl print out the filename where the stack usage occurs. This is
useful for code built as loadable modules.
For built-in code, it just prints the kernel image file name, like
"vmlinux". Examples:
Andrew Morton [Sun, 25 Jun 2006 12:48:27 +0000 (05:48 -0700)]
[PATCH] at91rm9200-rtc-driver-tidy
- whitespace fixes (80-col display)
- one unneeded cast of void*
Cc: Andrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Victor [Sun, 25 Jun 2006 12:48:27 +0000 (05:48 -0700)]
[PATCH] AT91RM9200 RTC driver
Adds support for the RTC integrated in the Atmel AT91RM9200 SoC.
Driver was originally written for 2.4 by Rick Bronson. Then converted to
2.6 ARM RTC API by Steven Scholz. Now converted to the RTC class model.
Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Victor [Sun, 25 Jun 2006 12:48:25 +0000 (05:48 -0700)]
[PATCH] RTC: Add rtc_year_days() to calculate tm_yday
RTC: Add exported function rtc_year_days() to calculate the tm_yday value.
Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Raphael Assenat [Sun, 25 Jun 2006 12:48:24 +0000 (05:48 -0700)]
[PATCH] Add v3020 RTC support
This patch adds support for the v3020 RTC from EM Microelectronic.
The v3020 RTC is designed to be connected on a bus using only one data bit.
Since any data bit may be used, it is necessary to specify this to the
driver by passing a struct v3020_platform_data pointer (see
include/linux/rtc-v3020.h) to the driver.
Part of the following code comes from the kernel patchs produced by
Compulab for their products. The original file (available here:
http://raph.people.8d.com/misc/emv3020.c) was released under the terms of
the GPL license.
Raphael Assenat [Sun, 25 Jun 2006 12:48:23 +0000 (05:48 -0700)]
[PATCH] Add max6902 RTC support
Add support for the MAX6902 SPI RTC chip. Tested on a pxa2xx cpu.
The compulab code comes from the kernel patch the produce for their
cn-x255 board. (inside a zip file on the
http://www.compulab.co.il/x255/html/x255-developer.htm)
The original file (drivers/char/max6902.c) was GPL, which is of course
an appropriate licence:
/*
* max6902.c
*
* Driver for MAX6902 RTC
*
* Copyright (C) 2004 Compulab Ltd.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*
*/
For reference, you can get the original file here:
http://raph.people.8d.com/misc/max6902.c
G. Liakhovetski [Sun, 25 Jun 2006 12:48:18 +0000 (05:48 -0700)]
[PATCH] drivers/acorn/char/pcf8583.[hc] vs. RTC subsystem
A port of the driver for the pcf8583 i2c rtc controller to the generic RTC
framework by Alessandro Zummo. Based on
drivers/acorn/char/{pcf8583.[hc],i2c.c}. Hopefully, acorn can be converted
too to use this driver in the future.
Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Atsushi Nemoto [Sun, 25 Jun 2006 12:48:17 +0000 (05:48 -0700)]
[PATCH] RTC: rtc-dev UIE emulation
Import genrtc's RTC UIE emulation (CONFIG_GEN_RTC_X) to rtc-dev driver with
slight adjustments/refinements. This makes UIE-less rtc drivers work
better with programs doing read/poll on /dev/rtc, such as hwclock. This
emulation should not harm rtc drivers with UIE support, since
rtc_dev_ioctl() calls underlaying rtc driver's ioctl() first.
David Brownell [Sun, 25 Jun 2006 12:48:17 +0000 (05:48 -0700)]
[PATCH] "RTC-framework" driver for DS1307 and similar RTC chips
This is an "RTC-framework" driver for DS1307 and similar RTC chips,
It should be a full replacement for the existing ds1337.c driver (using the
older RTC glue), giving a net increase in the number of RTC chips that work
out-of-the-box. There's a whole cluster of RTCs that are very similar, but
the 1337 driver was a bit too picky to work with most of them.
Still no support for RTC alarm IRQs (on chips that support them).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jesper Juhl [Sun, 25 Jun 2006 12:48:16 +0000 (05:48 -0700)]
[PATCH] Correct sa'K' description in sysrq.txt
sysrq SAK is described as being something you should mistake for SAK from
c2 compliant systems - whoops. What's meant is that it should *not* be
mistaken as such.
Jan Engelhardt [Sun, 25 Jun 2006 12:48:15 +0000 (05:48 -0700)]
[PATCH] printk time parameter
Currently, enabling/disabling printk timestamps is only possible through
reboot (bootparam) or recompile. I normally do not run with timestamps
(since syslog handles that in a good manner), but for measuring small
kernel delays (e.g. irq probing - see parport thread) I needed subsecond
precision, but then again, just for some minutes rather than all kernel
messages to come. The following patch adds a module_param() with which the
timestamps can be en-/disabled in a live system through
/sys/modules/printk/parameters/printk_time.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Davide Libenzi [Sun, 25 Jun 2006 12:48:14 +0000 (05:48 -0700)]
[PATCH] epoll: use unlocked wqueue operations
A few days ago Arjan signaled a lockdep red flag on epoll locks, and
precisely between the epoll's device structure lock (->lock) and the wait
queue head lock (->lock).
Like I explained in another email, and directly to Arjan, this can't happen
in reality because of the explicit check at eventpoll.c:592, that does not
allow to drop an epoll fd inside the same epoll fd. Since lockdep is
working on per-structure locks, it will never be able to know of policies
enforced in other parts of the code.
It was decided time ago of having the ability to drop epoll fds inside
other epoll fds, that triggers a very trick wakeup operations (due to
possibly reentrant callback-driven wakeups) handled by the
ep_poll_safewake() function. While looking again at the code though, I
noticed that all the operations done on the epoll's main structure wait
queue head (->wq) are already protected by the epoll lock (->lock), so that
locked-style functions can be used to manipulate the ->wq member. This
makes both a lock-acquire save, and lockdep happy.
Running totalmess on my dual opteron for a while did not reveal any problem
so far:
http://www.xmailserver.org/totalmess.c
Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Valerie Henson [Sun, 25 Jun 2006 12:48:12 +0000 (05:48 -0700)]
[PATCH] Make EXT2_DEBUG work again
This patch makes EXT2_DEBUG work again. Due to lack of proper include
file, EXT2_DEBUG was undefined in bitmap.c and ext2_count_free() is left
out. Moved to balloc.c and removed bitmap.c entirely.
Second, debug versions of ext2_count_free_{inodes/blocks} reacquires
superblock lock. Moved lock into callers.
Signed-off-by: Val Henson <val_henson@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
H. Peter Anvin [Sun, 25 Jun 2006 12:48:10 +0000 (05:48 -0700)]
[PATCH] Make sysctl obligatory except under CONFIG_EMBEDDED
Make makes sysctl non-optional unless EMBEDDED is set. There are a number
of interfaces exposed via sysctl, enough that it has to be considered core
kernel functionality at this point.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Sun, 25 Jun 2006 12:48:07 +0000 (05:48 -0700)]
[PATCH] ext3_fsblk_t: the rest of in-kernel filesystem blocks conversion
Convert the ext3 in-kernel filesystem blocks to ext3_fsblk_t. Convert the
rest of all unsigned long type in-kernel filesystem blocks to ext3_fsblk_t,
and replace the printk format string respondingly.
Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Sun, 25 Jun 2006 12:48:06 +0000 (05:48 -0700)]
[PATCH] ext3_fsblk_t: filesystem, group blocks and bug fixes
Some of the in-kernel ext3 block variable type are treated as signed 4 bytes
int type, thus limited ext3 filesystem to 8TB (4kblock size based). While
trying to fix them, it seems quite confusing in the ext3 code where some
blocks are filesystem-wide blocks, some are group relative offsets that need
to be signed value (as -1 has special meaning). So it seem saner to define
two types of physical blocks: one is filesystem wide blocks, another is
group-relative blocks. The following patches clarify these two types of
blocks in the ext3 code, and fix the type bugs which limit current 32 bit ext3
filesystem limit to 8TB.
With this series of patches and the percpu counter data type changes in the mm
tree, we are able to extend exts filesystem limit to 16TB.
This work is also a pre-request for the recent >32 bit ext3 work, and makes
the kernel to able to address 48 bit ext3 block a lot easier: Simply redefine
ext3_fsblk_t from unsigned long to sector_t and redefine the format string for
ext3 filesystem block corresponding.
Two RFC with a series patches have been posted to ext2-devel list and have
been reviewed and discussed:
http://marc.theaimsgroup.com/?l=ext2-devel&m=114722190816690&w=2
Patches are tested on both 32 bit machine and 64 bit machine, <8TB ext3 and
>8TB ext3 filesystem(with the latest to be released e2fsprogs-1.39). Tests
includes overnight fsx, tiobench, dbench and fsstress.
This patch:
Defines ext3_fsblk_t and ext3_grpblk_t, and the printk format string for
filesystem wide blocks.
This patch classifies all block group relative blocks, and ext3_fsblk_t blocks
occurs in the same function where used to be confusing before. Also include
kernel bug fixes for filesystem wide in-kernel block variables. There are
some fileystem wide blocks are treated as int/unsigned int type in the kernel
currently, especially in ext3 block allocation and reservation code. This
patch fixed those bugs by converting those variables to ext3_fsblk_t(unsigned
long) type.
Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix section warning:
WARNING: drivers/scsi/megaraid/megaraid_mbox.o - Section mismatch: reference to .init.text: from .text between 'megaraid_probe_one' (at offset 0x171e) and 'megaraid_queue_command'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Sun, 25 Jun 2006 12:48:02 +0000 (05:48 -0700)]
[PATCH] Make copy_from_user_inatomic NOT zero the tail on i386
As described in a previous patch and documented in mm/filemap.h,
copy_from_user_inatomic* shouldn't zero out the tail of the buffer after an
incomplete copy.
This patch implements that change for i386.
For the _nocache version, a new __copy_user_intel_nocache is defined similar
to copy_user_zeroio_intel_nocache, and this is ultimately used for the copy.
For the regular version, __copy_from_user_ll_nozero is defined which uses
__copy_user and __copy_user_intel - the later needs casts to reposition the
__user annotations.
If copy_from_user_atomic is given a constant length of 1, 2, or 4, then we do
still zero the destintion on failure. This didn't seem worth the effort of
fixing as the places where it is used really don't care.
Signed-off-by: Neil Brown <neilb@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Sun, 25 Jun 2006 12:47:58 +0000 (05:47 -0700)]
[PATCH] Prepare for __copy_from_user_inatomic to not zero missed bytes
The problem is that when we write to a file, the copy from userspace to
pagecache is first done with preemption disabled, so if the source address is
not immediately available the copy fails *and* *zeros* *the* *destination*.
This is a problem because a concurrent read (which admittedly is an odd thing
to do) might see zeros rather that was there before the write, or what was
there after, or some mixture of the two (any of these being a reasonable thing
to see).
If the copy did fail, it will immediately be retried with preemption
re-enabled so any transient problem with accessing the source won't cause an
error.
The first copying does not need to zero any uncopied bytes, and doing so
causes the problem. It uses copy_from_user_atomic rather than copy_from_user
so the simple expedient is to change copy_from_user_atomic to *not* zero out
bytes on failure.
The first of these two patches prepares for the change by fixing two places
which assume copy_from_user_atomic does zero the tail. The two usages are
very similar pieces of code which copy from a userspace iovec into one or more
page-cache pages. These are changed to remove the assumption.
The second patch changes __copy_from_user_inatomic* to not zero the tail.
Once these are accepted, I will look at similar patches of other architectures
where this is important (ppc, mips and sparc being the ones I can find).
This patch:
There is a problem with __copy_from_user_inatomic zeroing the tail of the
buffer in the case of an error. As it is called in atomic context, the error
may be transient, so it results in zeros being written where maybe they
shouldn't be.
In the usage in filemap, this opens a window for a well timed read to see data
(zeros) which is not consistent with any ordering of reads and writes.
Most cases where __copy_from_user_inatomic is called, a failure results in
__copy_from_user being called immediately. As long as the latter zeros the
tail, the former doesn't need to. However in *copy_from_user_iovec
implementations (in both filemap and ntfs/file), it is assumed that
copy_from_user_inatomic will zero the tail.
This patch removes that assumption, so that after this patch it will
be safe for copy_from_user_inatomic to not zero the tail.
This patch also adds some commentary to filemap.h and asm-i386/uaccess.h.
After this patch, all architectures that might disable preempt when
kmap_atomic is called need to have their __copy_from_user_inatomic* "fixed".
This includes
- powerpc
- i386
- mips
- sparc
Signed-off-by: Neil Brown <neilb@suse.de> Cc: David Howells <dhowells@redhat.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Chris Wright [Sun, 25 Jun 2006 12:47:55 +0000 (05:47 -0700)]
[PATCH] cpuset: remove extra cpuset_zone_allowed check in __alloc_pages
This is redundant with check in wakeup_kswapd.
Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Paul Jackson <pj@sgi.com> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Sun, 25 Jun 2006 12:47:50 +0000 (05:47 -0700)]
[PATCH] Avoid disk sector_t overflow for >2TB ext3 filesystem
If ext3 filesystem is larger than 2TB, and sector_t is a u32 (i.e.
CONFIG_LBD not defined in the kernel), the calculation of the disk sector
will overflow. Add check at ext3_fill_super() and ext3_group_extend() to
prevent mount/remount/resize >2TB ext3 filesystem if sector_t size is 4
bytes.
Verified this patch on a 32 bit platform without CONFIG_LBD defined
(sector_t is 32 bits long), mount refuse to mount a 10TB ext3.
Signed-off-by: Mingming Cao<cmm@us.ibm.com> Acked-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
schedule_on_each_cpu() presently does a large kmalloc - 96 kbytes on 1024 CPU
64-bit.
Rework it so that we do one 8192-byte allocation and then a pile of tiny ones,
via alloc_percpu(). This has a much higher chance of success (100% in the
current VM).
This also has the effect of reducing the memory requirements from NR_CPUS*n to
num_possible_cpus()*n.
Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 25 Jun 2006 12:47:47 +0000 (05:47 -0700)]
[PATCH] kernel-doc: drop leading space in sections
Drop leading space of kernel-doc section contents.
"Section" data (contents) are split from the section header
(e.g., Note: below is a section header:
* Note: list_empty on entry does not return true after this, the entry is
* in an undefined state.
).
Currently the data/contents begins with a space and is left that way, which
causes it to look bad when printed (in text mode; see example below), so
just remove the leading space.
Note:
list_empty on entry does not return true after this, the entry is in an
undefined state.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Sun, 25 Jun 2006 12:47:46 +0000 (05:47 -0700)]
[PATCH] pdflush: handle resume wakeups
pdflush is carefully designed to ensure that all wakeups have some
corresponding work to do - if a woken-up pdflush thread discovers that it
hasn't been given any work to do then this is considered an error.
That all broke when swsusp came along - because a timer-delivered wakeup to a
frozen pdflush thread will just get lost. This causes the pdflush thread to
get lost as well: the writeback timer is supposed to be re-armed by pdflush in
process context, but pdflush doesn't execute the callout which does this.
Fix that up by ignoring the return value from try_to_freeze(): jsut proceed,
see if we have any work pending and only go back to sleep if that is not the
case.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6 / log