The prototype for sys_fadvise64_64() is:
long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
The argument list is therefore as follows on legacy ABI:
fd: type int (r0)
offset: type long long (r1-r2)
len: type long long (r3-sp[0])
advice: type int (sp[4])
With EABI this becomes:
fd: type int (r0)
offset: type long long (r2-r3)
len: type long long (sp[0]-sp[4])
advice: type int (sp[8])
Not only do we have ABI differences here, but the EABI version requires
one additional word on the syscall stack.
To avoid the ABI mismatch and the extra stack space required with EABI
this syscall is now defined with a different argument ordering
on ARM as follows:
long sys_arm_fadvise64_64(int fd, int advice, loff_t offset, loff_t len)
This gives us the following ABI independent argument distribution:
fd: type int (r0)
advice: type int (r1)
offset: type long long (r2-r3)
len: type long long (sp[0]-sp[4])
Now, since the syscall entry code takes care of 5 registers only by
default including the store of r4 to the stack, we need a wrapper to
store r5 to the stack as well. Because that wrapper was missing and was
always required this means that sys_fadvise64_64 never worked on ARM and
therefore we can safely reuse its syscall number for our new
sys_arm_fadvise64_64 interface.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
David Vrabel [Wed, 31 Aug 2005 20:45:14 +0000 (21:45 +0100)]
[ARM] 2869/1: ixp4xx: correct ioread*/iowrite*
Patch from David Vrabel
Correct the ioread* and iowrite* functions. In particular, add an offset to the cookie in ioport_map so we can map I/O port ranges starting from 0 (0 is for reporting errors).
Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Steve Longerbeam [Wed, 31 Aug 2005 20:22:20 +0000 (21:22 +0100)]
[ARM] 2867/2: unaligned ldrd/strd fixups
Patch from Steve Longerbeam
Adds an implementation of unaligned LDRD and STRD fixups.
Also fixes a bug where do_alignment() would misinterpret and
fixup an unaligned LDRD/STRD as LDRH/STRH, causing memory
corruption.
This is the same as Patch #2867/1, but with minor whitespace
and comments changes, plus a check for arch-level >= v5TE
before printing ai_dword count in proc_alignment_read().
Signed-off-by: Steve Longerbeam <stevel@mwwireless.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Deepak Saxena [Mon, 29 Aug 2005 21:54:53 +0000 (22:54 +0100)]
[ARM] 2853/1: Make alloc_init_supersection() work with 36-bit mappings
Patch from Deepak Saxena
Working on adding support for 36-bit static mappings for ARMv6 and
Intel's XSC3 core and noticed that alloc_init_supersection currently
increments the phys addr by 1MB on each of the 16 iterations and then
forces alignment to supersection size (16MB). This is really uneeded
b/c we have already forced the phys address to be 16MB aligned in
create_mapping(). Furthermore, this breaks 36-bit addressing b/c bits
[23:20] of the PMD contain bits [35:32] of the physical address and
the masking causes us to loose those bits thus ending up with an
incorrect virt -> phys translation. The other option is to have an
alloc_init_supersection36.
Tested on Intel IXP2350 CPU with 36-bit static I/O mappings.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nicolas Pitre [Mon, 29 Aug 2005 21:46:32 +0000 (22:46 +0100)]
[ARM] 2858/1: ARM has sys_fadvise64_64 only
Patch from Nicolas Pitre
There is no need to define __ARCH_WANT_SYS_FADVISE64 on ARM since it
only serves to compile in a compatibility wrapper for sys_fadvise64
which never was tied to any syscall number.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Deepak Saxena [Mon, 29 Aug 2005 21:46:30 +0000 (22:46 +0100)]
[ARM] 2836/1: Cleanup IXP4xx GPIO code
Patch from Deepak Saxena
This patch implements the set_irq_type() hooks for configuring GPIO
IRQ type and updates all the platforms to use it instead of the
gpio_line_config() function which is now used to configure input
vs. output on the pins.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Al Viro [Sun, 28 Aug 2005 02:19:14 +0000 (03:19 +0100)]
[PATCH] mod_devicetable.h fixes
* ieee1394_device_id has kernel_ulong_t field after an odd number of
__u32 ones. Since mod_devicetable.h is included both from kernel and
from host build helper, we may be in trouble if we are building on
32bit host for 64bit target - userland sees unsigned long long,
kernel sees unsigned long and while their sizes match, alignments
might not. Fixed by forcing alignment. Fortunately, almost nobody
else needs that - the rest of such fields is naturally aligned as it
is.
* of_device_id has void * in it. Host userland helpers need
kernel_ulong_t instead, since their void * might have nothing to do
with the kernel one. Fixed in the same way it's done for similar
problems in pcmcia_device_id (ifdef __KERNEL__).
* pcmcia_device_id has the same problem as ieee1394_device_id. Fixed
the same way.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Steven Rostedt [Mon, 29 Aug 2005 15:44:09 +0000 (11:44 -0400)]
[PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it. I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.
The way NODEFER affects signals on other Unix boxes is as follows:
1) If NODEFER is set, other signals in sa_mask are still blocked.
2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).
The way NODEFER affects signals on Linux:
1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).
2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.
The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.
Unix boxes that were tested: DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.
* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux. So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.
Paul Mackerras [Sat, 27 Aug 2005 23:40:01 +0000 (09:40 +1000)]
[PATCH] Remove race between con_open and con_close
[ Same race and same patch also by Steven Rostedt <rostedt@goodmis.org> ]
I have a laptop (G3 powerbook) which will pretty reliably hit a race
between con_open and con_close late in the boot process and oops in
vt_ioctl due to tty->driver_data being NULL.
What happens is this: process A opens /dev/tty6; it comes into
con_open() (drivers/char/vt.c) and assign a non-NULL value to
tty->driver_data. Then process A closes that and concurrently process
B opens /dev/tty6. Process A gets through con_close() and clears
tty->driver_data, since tty->count == 1. However, before process A
can decrement tty->count, we switch to process B (e.g. at the
down(&tty_sem) call at drivers/char/tty_io.c line 1626).
So process B gets to run and comes into con_open with tty->count == 2,
as tty->count is incremented (in init_dev) before con_open is called.
Because tty->count != 1, we don't set tty->driver_data. Then when the
process tries to do anything with that fd, it oopses.
The simple and effective fix for this is to test tty->driver_data
rather than tty->count in con_open. The testing and setting of
tty->driver_data is serialized with respect to the clearing of
tty->driver_data in con_close by the console_sem. We can't get a
situation where con_open sees tty->driver_data != NULL and then
con_close on a different fd clears tty->driver_data, because
tty->count is incremented before con_open is called. Thus this patch
eliminates the race, and in fact with this patch my laptop doesn't
oops.
Signed-off-by: Paul Mackerras <paulus@samba.org>
[ Same patch Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
in http://marc.theaimsgroup.com/?l=linux-kernel&m=112450820432121&w=2 ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jan Blunck [Sat, 27 Aug 2005 18:07:52 +0000 (11:07 -0700)]
[PATCH] sg.c: fix a memory leak in devices seq_file implementation
I know that scsi procfs is legacy code but this is a fix for a memory leak.
While reading through sg.c I realized that the implementation of
/proc/scsi/sg/devices with seq_file is leaking memory due to freeing the
pointer returned by the next() iterator method. Since next() might return
NULL or an error this is wrong. This patch fixes it through using the
seq_files private field for holding the reference to the iterator object.
Here is a small bash script to trigger the leak. Use slabtop to watch
the size-32 usage grow and grow.
#!/bin/sh
while true; do
cat /proc/scsi/sg/devices > /dev/null
done
Signed-off-by: Jan Blunck <j.blunck@tu-harburg.de> Acked-by: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] fix for race problem in DVB USB drivers (dibusb)
Fixed race between submitting streaming URBs in the driver and starting
the actual transfer in hardware (demodulator and USB controller) which
sometimes lead to garbled data transfers. URBs are now submitted first,
then the transfer is enabled. Dibusb devices and clones are now fully
functional again.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Francois Romieu [Tue, 23 Aug 2005 23:14:23 +0000 (01:14 +0200)]
[PATCH] r8169: avoid conflict between revisions 2 and 3 of the Linksys EG1032
Both revisions share the same PCI device ID and vendor ID but revision 2
of the device uses SysKonnect's chipset whereas revision 3 of the device
uses Realtek's 8169 chipset.
Credit goes to Christiaan Lutzer <mythtv.lutzer@gmail.com> for reporting
the issue and giving the actual value for the different revisions.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Ralf Baechle [Wed, 24 Aug 2005 17:01:33 +0000 (18:01 +0100)]
[PATCH] Fix 6pack setting of MAC address
Don't check type of sax25_family; dev_set_mac_address has already done
that before and anyway, the type to check against would have been
ARPHRD_AX25. We only got away because AF_AX25 and ARPHRD_AX25 both happen
to be defined to the same value.
Don't check sax25_ndigis either; it's value is insignificant for the
purpose of setting the MAC address and the check has shown to break
some application software for no good reason.
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Roland Dreier [Thu, 25 Aug 2005 20:40:04 +0000 (13:40 -0700)]
[PATCH] IB: move include files to include/rdma
Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.
Currently we may have work scheduled in default kernel workqueue when
the device is going down. The device could get freed before this
workqueue gets serviced. I am actually seeing this causing system
hangs.
The following patch fixes this by using ipoib_workqueue which gets
flushed when the device is going down.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Sean Hefty [Fri, 19 Aug 2005 20:46:34 +0000 (13:46 -0700)]
[PATCH] IB: fix userspace CM deadlock
Fix deadlock condition resulting from trying to destroy a cm_id
from the context of a CM thread. The synchronization around the
ucm context structure is simplified as a result, and some simple
code cleanup is included.
Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Fri, 19 Aug 2005 19:03:17 +0000 (12:03 -0700)]
[PATCH] IPoIB: Set full membership bit in P_Keys
Always make sure that the full membership bit is set in the P_Keys
that IPoIB uses. This makes sure that all hosts join the correct
multicast groups so that hosts that are partial partition members
can talk to the rest of the network.
Roland Dreier [Fri, 19 Aug 2005 17:36:11 +0000 (10:36 -0700)]
[PATCH] IB/mthca: Handle context tables smaller than our chunk size
When creating a table in context memory where the table is smaller
than our chunk size, we don't want to allocate and map a full chunk.
Instead, allocate just enough memory to cover the table.
This can be pretty simple because all tables are a power-of-2 size, so
either the table is a multiple of the chunk size, or it's smaller than
one chunk.
Roland Dreier [Fri, 19 Aug 2005 17:33:35 +0000 (10:33 -0700)]
[PATCH] IB/mthca: Move WQE structures into their own header
Move the definitions of the WQE structures from mthca_qp.c into
mthca_wqe.h, so that we'll be able to share them when we add the
SRQ code in mthca_srq.c.
Roland Dreier [Fri, 19 Aug 2005 16:19:05 +0000 (09:19 -0700)]
[PATCH] IB/mthca: Simplify handling of completions with error
Mem-free HCAs never generate error CQEs that complete multiple WQEs,
so just skip the call to mthca_free_err_wqe() for them rather than
having logic to handle the mem-free case in mthca_free_err_wqe().
Roland Dreier [Thu, 18 Aug 2005 20:39:31 +0000 (13:39 -0700)]
[PATCH] IB/mthca: Factor out common queue alloc code
Clean up the allocation of memory for queues by factoring out the
common code into mthca_buf_alloc() and mthca_buf_free(). Now CQs and
QPs share the same queue allocation code, which we'll also use for SRQs.
Roland Dreier [Thu, 18 Aug 2005 19:24:13 +0000 (12:24 -0700)]
[PATCH] IB: userspace SRQ support
Add SRQ support to userspace verbs module. This adds several commands
and associated structures, but it's OK to do this without bumping the
ABI version because the commands are added at the end of the list so
they don't change the existing numbering. There are two cases to
worry about:
1. New kernel, old userspace. This is OK because old userspace simply
won't try to use the new SRQ commands. None of the old commands are
changed.
2. Old kernel, new userspace. This works perfectly as long as
userspace doesn't try to use SRQ commands. If userspace tries to
use SRQ commands, it will get EINVAL, which is perfectly
reasonable: the kernel doesn't support SRQs, so we couldn't do any
better.
Roland Dreier [Thu, 18 Aug 2005 19:14:11 +0000 (12:14 -0700)]
[PATCH] IB/mthca: Report correct max_msg_sz
Set the max_msg_sz port property correctly in mthca's port_query
function. Also zero out the attr struct so that we don't leave
any other members uninitialized.
Roland Dreier [Wed, 17 Aug 2005 14:39:10 +0000 (07:39 -0700)]
[PATCH] IB/mthca: Use correct port width capability value
When we call the INIT_IB firmware command to bring up a port, use
the actual port width capability returned by the QUERY_DEV_LIM
command instead of always trying to enable both 1X and 4X. This
fixes breakage seen when the firmware is build to allow 4X only.
Roland Dreier [Mon, 15 Aug 2005 14:35:16 +0000 (07:35 -0700)]
[PATCH] IB: unmap FMRs when destroying FMR pool
Make sure that all FMRs are unmapped before we deallocate them so that
we don't leak references to our protection domain when destroying an
FMR pool. (Bug reported by Guy German <guyg@voltaire.com>)
James Bottomley [Sat, 27 Aug 2005 01:34:17 +0000 (18:34 -0700)]
[PATCH] Fix oops in sysfs_hash_and_remove_file()
The problem arises if an entity in sysfs is created and removed without
ever having been made completely visible. In SCSI this is triggered by
removing a device while it's initialising.
The problem appears to be that because it was never made visible in sysfs,
the sysfs dentry has a null d_inode which oopses when a reference is made
to it. The solution is simply to check d_inode and assume the object was
never made visible (and thus doesn't need deleting) if it's NULL.
(akpm: possibly a stopgap for 2.6.13 scsi problems. May not be the
long-term fix)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Deepak Saxena [Sat, 27 Aug 2005 01:34:11 +0000 (18:34 -0700)]
[PATCH] arm: fix IXP4xx flash resource range
We are currently reserving one byte more than actually needed by the flash
device and overlapping into the next I/O expansion bus window. This a)
causes us to allocate an extra page of VM due to ARM ioremap() alignment
code and b) could cause problems if another driver tries to request the
next expansion bus window.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Sat, 27 Aug 2005 01:34:10 +0000 (18:34 -0700)]
[PATCH] x86_64: Tell VM about holes in nodes
Some nodes can have large holes on x86-64.
This fixes problems with the VM allowing too many dirty pages because it
overestimates the number of available RAM in a node. In extreme cases you
can end up with all RAM filled with dirty pages which can lead to deadlocks
and other nasty behaviour.
This patch just tells the VM about the known holes from e820. Reserved
(like the kernel text or mem_map) is still not taken into account, but that
should be only a few percent error now.
Small detail is that the flat setup uses the NUMA free_area_init_node() now
too because it offers more flexibility.
(akpm: lotsa thanks to Martin for working this problem out)
Cc: Martin Bligh <mbligh@mbligh.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Anton Blanchard [Sat, 27 Aug 2005 01:34:07 +0000 (18:34 -0700)]
[PATCH] ppc64: Fix issue with gcc 4.0 compiled kernels
I recently had a BUG_ON() go off spuriously on a gcc 4.0 compiled kernel.
It turns out gcc-4.0 was removing a sign extension while earlier gcc
versions would not. Thinking this to be a compiler bug, I submitted a
report:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=23422
It turns out we need to cast the input in order to tell gcc to sign extend
it.
Thanks to Andrew Pinski for his help on this bug.
Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
At the suggestion of Nick Piggin and Dinakar, totally disable
the facility to allow cpu_exclusive cpusets to define dynamic
sched domains in Linux 2.6.13, in order to avoid problems
first reported by John Hawkes (corrupt sched data structures
and kernel oops).
This has been built for ppc64, i386, ia64, x86_64, sparc, alpha.
It has been built, booted and tested for cpuset functionality
on an SN2 (ia64).
Dinakar or Nick - could you verify that it for sure does avoid
the problems Hawkes reported. Hawkes is out of town, and I don't
have the recipe to reproduce what he found.
Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The partial disabling of Dinakar's new facility to allow
cpu_exclusive cpusets to define dynamic sched domains
doesn't go far enough. At the suggestion of Nick Piggin
and Dinakar, let us instead totally disable this facility
for 2.6.13, in order to avoid problems first reported
by John Hawkes (corrupt sched data structures and kernel oops).
This patch removes the partial disabling code in 2.6.13-rc7,
in anticipation of the next patch, which will totally disable
it instead.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jean Delvare [Thu, 25 Aug 2005 16:43:37 +0000 (18:43 +0200)]
[PATCH] hwmon: Off-by-one error in fscpos driver
Coverity uncovered an off-by-one error in the fscpos driver, in function
set_temp_reset(). Writing to the temp3_reset sysfs file will lead to an
array overrun, in turn causing an I2C write to a random register of the
FSC Poseidon chip. Additionally, writing to temp1_reset and temp2_reset
will not work as expected. The fix is straightforward.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Thu, 25 Aug 2005 22:13:14 +0000 (23:13 +0100)]
[PATCH] late spinlock initialization in ieee1394/ohci
spinlock used in irq handler should be initialized before registering
irq, even if we know that our device has interrupts disabled; handler
is registered shared and taking spinlock is done unconditionally. As
it is, we can and do get oopsen on boot for some configuration, depending
on irq routing - I've got a reproducer.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Ben Collins <bcollins@debian.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Thu, 25 Aug 2005 22:03:35 +0000 (23:03 +0100)]
[PATCH] bogus function type in qdio
In qdio_get_micros() volatile in return type is plain noise (even with old
gccisms it would make no sense - noreturn function returning __u64 is a
bit odd ;-)
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Thu, 25 Aug 2005 21:49:14 +0000 (01:49 +0400)]
[PATCH] drivers/hwmon/*: kfree() correct pointers
The adm9240 driver, in adm9240_detect(), allocates a structure. The
error path attempts to kfree() ->client field of it (second one),
resulting in an oops (or slab corruption) if the hardware is not present.
->client field in adm1026, adm1031, smsc47b397 and smsc47m1 is the first in
${HWMON}_data structure, but fix them too.
Steve French [Fri, 26 Aug 2005 19:42:59 +0000 (14:42 -0500)]
[PATCH] Fix oops in fs/locks.c on close of file with pending locks
The recent change to locks_remove_flock code in fs/locks.c changes how
byte range locks are removed from closing files, which shows up a bug in
cifs.
The assumption in the cifs code was that the close call sent to the
server would remove any pending locks on the server on this file, but
that is no longer safe as the fs/locks.c code on the client wants unlock
of 0 to PATH_MAX to remove all locks (at least from this client, it is
not possible AFAIK to remove all locks from other clients made to the
server copy of the file).
Note that cifs locks are different from posix locks - and it is not
possible to map posix locks perfectly on the wire yet, due to
restrictions of the cifs network protocol, even to Samba without adding
a new request type to the network protocol (which we plan to do for
Samba 3.0.21 within a few months), but the local client will have the
correct, posix view, of the lock in most cases.
The correct fix for cifs for this would involve a bigger change than I
would like to do this late in the 2.6.13-rc cycle - and would involve
cifs keeping track of all unmerged (uncoalesced) byte range locks for
each remote inode and scanning that list to remove locks that intersect
or fall wholly within the range - locks that intersect may have to be
reaquired with the smaller, remaining range.
Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 26 Aug 2005 14:56:47 +0000 (15:56 +0100)]
[PATCH] libata: typo
You spelt heuristic wrongly. Also reformatted to 80 columns,
ignore the diff and fix the typo if you prefer that. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
There is an off by one problem with idr_get_new_above.
The comment and function name suggest that it will return an id >
starting_id, but it actually returned an id >= starting_id, and kernel
callers other than inotify treated it as such.
The patch below fixes the comment, and fixes inotifys usage. The
function name still doesn't match the behaviour, but it never did.
Signed-off-by: John McCutchan <ttb@tentacle.dhs.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Fri, 26 Aug 2005 17:49:22 +0000 (10:49 -0700)]
Ignore disabled ROM resources at setup
Writing even a disabled value seems to mess up some matrox graphics
cards. It may be a card-related issue, but we may also be writing
reserved low bits in the result.
This was a fall-out of switching x86 over to the generic PCI resource
allocation code, and needs more debugging. In particular, the old x86
code defaulted to not doing any resource allocations at all for ROM
resources.
In the meantime, this has been reported to make X happier by Helge
Hafting <helgehaf@aitel.hist.no>.
Linus Torvalds [Fri, 26 Aug 2005 17:40:10 +0000 (10:40 -0700)]
Only pre-allocate 256 bytes of cardbio IO range
It may seem small, but most cards need much less, if any, and this not
only makes the code adhere to the comment, it seems to fix a boot-time
lockup on a ThinkPad 380XD laptop reported by Tero Roponen <teanropo@cc.jyu.fi>
Michael Chan [Thu, 25 Aug 2005 22:31:41 +0000 (15:31 -0700)]
[TG3]: Fix ethtool loopback test lockup
The tg3_abort_hw() call in tg3_test_loopback() is causing lockups on
some devices. tg3_abort_hw() disables the memory arbiter, causing
tg3_reset_hw() to hang when it tries to write the pre-reset signature.
tg3_abort_hw() should only be called after the pre-reset signature has
been written. This is all done in tg3_reset_hw() so the tg3_abort_hw()
call is unnecessary and can be removed.
[ Also bump driver version and release date. -DaveM ]
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jens Axboe [Wed, 24 Aug 2005 12:57:54 +0000 (14:57 +0200)]
[PATCH] cfq-iosched.c: minor fixes
One critical fix and two minor fixes for 2.6.13-rc7:
- Max depth must currently be 2 to allow barriers to function on SCSI
- Prefer sync request over async in choosing the next request
- Never allow async request to preempt or disturb the "anticipation" for
a single cfq process context. This is as-designed, the code right now
is buggy in that area.
Keith Owens [Wed, 24 Aug 2005 06:06:25 +0000 (16:06 +1000)]
[PATCH] Export pcibios_bus_to_resource
pcibios_bus_to_resource is exported on all architectures except ia64
and sparc. Add exports for the two missing architectures. Needed when
Yenta socket support is compiled as a module.
Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I mistakedly disabled fusion support in an earlier update. Fusion
is commonly used on many x86-64 systems, so this was a problem.
This patch fixes that.
Signed-off-by: And Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6 / log