Alan Cox [Thu, 24 Jul 2008 04:29:55 +0000 (21:29 -0700)]
spidev: BKL removal
Another step to removing ->ioctl and to removing the BKL
[dbrownell@users.sourceforge.net: take final step; BKL not needed] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Grant Likely [Thu, 24 Jul 2008 04:29:55 +0000 (21:29 -0700)]
spi: make spi_board_info.modalias a char array
Currently, 'modalias' in the spi_device structure is a 'const char *'.
The spi_new_device() function fills in the modalias value from a passed in
spi_board_info data block. Since it is a pointer copy, the new spi_device
remains dependent on the spi_board_info structure after the new spi_device
is registered (no other fields in spi_device directly depend on the
spi_board_info structure; all of the other data is copied).
This causes a problem when dynamically propulating the list of attached
SPI devices. For example, in arch/powerpc, the list of SPI devices can be
populated from data in the device tree. With the current code, the device
tree adapter must kmalloc() a new spi_board_info structure for each new
SPI device it finds in the device tree, and there is no simple mechanism
in place for keeping track of these allocations.
This patch changes modalias from a 'const char *' to a fixed char array.
By copying the modalias string instead of referencing it, the dependency
on the spi_board_info structure is eliminated and an outside caller does
not need to maintain a separate spi_board_info allocation for each device.
If searched through the code to the best of my ability for any references
to modalias which may be affected by this change and haven't found
anything. It has been tested with the lite5200b platform in arch/powerpc.
[dbrownell@users.sourceforge.net: cope with linux-next changes: KOBJ_NAME_LEN obliterated, etc] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robert P. J. Day [Thu, 24 Jul 2008 04:29:53 +0000 (21:29 -0700)]
SPI Kconfig simplifications
Use "if SPI_MASTER" to remove numerous dependencies.
[dbrownell@users.sourceforge.net: remove a couple now-needless EXPERIMENTAL dependencies too] Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chen Gong [Thu, 24 Jul 2008 04:29:52 +0000 (21:29 -0700)]
spi: spi_mpc83xx clockrate fixes
This updates the SPI clock rate calculations for the spi_mpc83xx driver.
Some boundary conditions were wrong, and in several cases divide-by-16
wasn't always needed
Signed-off-by: Chen Gong <g.chen@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nye Liu [Thu, 24 Jul 2008 04:29:50 +0000 (21:29 -0700)]
cpm1: don't send break on TX_STOP, don't interrupt RX/TX when adjusting termios parameters
Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break
character. The driver appears to properly re-initialize _brkcr when the
SMC is restarted.
Do not interrupt RX/TX when the termios is being adjusted; it results in
corrupted characters appearing on the line.
Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changes to the generic console support code that happened a while ago
introduced a scenario where the initial console is used in parallel with
the final console during a brief period when switching between the two is
in progress. During that time a message about the switch-over is printed.
With some combinations of chips, firmware and drivers, such as the DEC
DZ11 clone used with the DECstation, a hang may happen because the
firmware used for the initial console may not expect the state of the chip
after it has been initialised by the driver.
This is a workaround for the DZ11 which reuses the power-management
callback to keep the transmitter of the line associated with the console
enabled. It reflects the consensus reached in a discussion a while ago.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
serial: Z85C30: avoid a hang at console switch-over
Changes to the generic console support code that happened a while ago
introduced a scenario where the initial console is used in parallel with
the final console during a brief period when switching between the two is
in progress. During that time a message about the switch-over is printed.
With some combinations of chips, firmware and drivers, such as the Zilog
Z85C30 SCC used with the DECstation, a hang may happen because the
firmware used for the initial console may not expect the state of the chip
after it has been initialised by the driver. This is not a bug in the
firmware, as some registers it would have to examine are write-only.
This is a workaround for the Z85C30 which reuses the power-management
callback to keep the transmitter of the line associated with the console
enabled. It reflects the consensus reached in a discussion a while ago.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
serial: add support for a no-name 4 ports multiserial card
It is a no-name PCI card. I found no reference to a producer so I used
"UNKNOWN_0x1584" as the name.
Full lspci:
01:07.0 0780: 10b5:9050 (rev 01)
Subsystem: 10b5:1584
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 1: I/O ports at ec00 [size=128]
Region 2: I/O ports at e480 [size=32]
Region 3: I/O ports at e400 [size=8]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] #06 [0080]
Capabilities: [4c] Vital Product Data
After:
0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A
0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A
0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A
0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A
Signed-off-by: Catalin(ux) M BOIE <catab@embedromix.ro> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Intel 82571 has a "Serial Over LAN" feature that doesn't properly
implements the receiving of break characters. When a break is received,
it doesn't set UART_LSR_DR and unless another character is received, the
break won't be received by the application.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds O_NONBLOCK support to pipe2. It is minimally more involved
than the patches for eventfd et.al but still trivial. The interfaces of the
create_write_pipe and create_read_pipe helper functions were changed and the
one other caller as well.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
flag parameters: NONBLOCK in socket and socketpair
This patch introduces support for the SOCK_NONBLOCK flag in socket,
socketpair, and paccept. To do this the internal function sock_attach_fd
gets an additional parameter which it uses to set the appropriate flag for
the file descriptor.
Given that in modern, scalable programs almost all socket connections are
non-blocking and the minimal additional cost for the new functionality
I see no reason not to add this code.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
fl = fcntl (s2, F_GETFL);
if ((fl & O_NONBLOCK) == 0)
{
puts ("paccept(SOCK_NONBLOCK) does not set non-blocking mode");
return 1;
}
close (s2);
close (s);
Building on the previous change to anon_inode_getfd, this patch introduces
support for handling of O_NONBLOCK in addition to the already supported
O_CLOEXEC. Following patches will take advantage of this support. As can be
seen, the additional support for supporting this functionality is minimal.
Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch introduces the new syscall inotify_init1 (note: the 1 stands for
the one parameter the syscall takes, as opposed to no parameter before). The
values accepted for this parameter are function-specific and defined in the
inotify.h header. Here the values must match the O_* flags, though. In this
patch CLOEXEC support is introduced.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
This patch introduces the new syscall pipe2 which is like pipe but it also
takes an additional parameter which takes a flag value. This patch implements
the handling of O_CLOEXEC for the flag. I did not add support for the new
syscall for the architectures which have a special sys_pipe implementation. I
think the maintainers of those archs have the chance to go with the unified
implementation but that's up to them.
The implementation introduces do_pipe_flags. I did that instead of changing
all callers of do_pipe because some of the callers are written in assembler.
I would probably screw up changing the assembly code. To avoid breaking code
do_pipe is now a small wrapper around do_pipe_flags. Once all callers are
changed over to do_pipe_flags the old do_pipe function can be removed.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
int
main (void)
{
int fd[2];
if (syscall (__NR_pipe2, fd, 0) != 0)
{
puts ("pipe2(0) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int coe = fcntl (fd[i], F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
return 1;
}
}
close (fd[0]);
close (fd[1]);
if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
{
puts ("pipe2(O_CLOEXEC) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int coe = fcntl (fd[i], F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
return 1;
}
}
close (fd[0]);
close (fd[1]);
This patch adds the new dup3 syscall. It extends the old dup2 syscall by one
parameter which is meant to hold a flag value. Support for the O_CLOEXEC flag
is added in this patch.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
This patch adds the new epoll_create2 syscall. It extends the old epoll_create
syscall by one parameter which is meant to hold a flag value. In this
patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.
A new name EPOLL_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
The timerfd_create syscall already has a flags parameter. It just is
unused so far. This patch changes this by introducing the TFD_CLOEXEC
flag to set the close-on-exec flag for the returned file descriptor.
A new name TFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
This patch adds the new eventfd2 syscall. It extends the old eventfd
syscall by one parameter which is meant to hold a flag value. In this
patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.
A new name EFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
This patch adds the new signalfd4 syscall. It extends the old signalfd
syscall by one parameter which is meant to hold a flag value. In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.
A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
This patch just extends the anon_inode_getfd interface to take an additional
parameter with a flag value. The flag value is passed on to
get_unused_fd_flags in anticipation for a use with the O_CLOEXEC flag.
No actual semantic changes here, the changed callers all pass 0 for now.
flag parameters: paccept w/out set_restore_sigmask
Some platforms do not have support to restore the signal mask in the
return path from a syscall. For those platforms syscalls like pselect are
not defined at all. This is, I think, not a good choice for paccept()
since paccept() adds more value on top of accept() than just the signal
mask handling.
Therefore this patch defines a scaled down version of the sys_paccept
function for those platforms. It returns -EINVAL in case the signal mask
is non-NULL but behaves the same otherwise.
Note that I explicitly included <linux/thread_info.h>. I saw that it is
currently included but indirectly two levels down. There is too much risk
in relying on this. The header might change and then suddenly the
function definition would change without anyone immediately noticing.
Signed-off-by: Ulrich Drepper <drepper@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is by far the most complex in the series. It adds a new syscall
paccept. This syscall differs from accept in that it adds (at the userlevel)
two additional parameters:
- a signal mask
- a flags value
The flags parameter can be used to set flag like SOCK_CLOEXEC. This is
imlpemented here as well. Some people argued that this is a property which
should be inherited from the file desriptor for the server but this is against
POSIX. Additionally, we really want the signal mask parameter as well
(similar to pselect, ppoll, etc). So an interface change in inevitable.
The flag value is the same as for socket and socketpair. I think diverging
here will only create confusion. Similar to the filesystem interfaces where
the use of the O_* constants differs, it is acceptable here.
The signal mask is handled as for pselect etc. The mask is temporarily
installed for the thread and removed before the call returns. I modeled the
code after pselect. If there is a problem it's likely also in pselect.
For architectures which use socketcall I maintained this interface instead of
adding a system call. The symmetry shouldn't be broken.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
This patch adds support for flag values which are ORed to the type passwd
to socket and socketpair. The additional code is minimal. The flag
values in this implementation can and must match the O_* flags. This
avoids overhead in the conversion.
The internal functions sock_alloc_fd and sock_map_fd get a new parameters
and all callers are changed.
Adrian Bunk [Thu, 24 Jul 2008 04:29:15 +0000 (21:29 -0700)]
CONFIG_SOUND_WM97XX: remove stale makefile line
The driver is gone for a long time.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Thu, 24 Jul 2008 04:29:10 +0000 (21:29 -0700)]
checkpatch: add checks for question mark and colon spacing
Add checks for the question mark colon operator spacing, and also check
the other uses of colon. Colon means a number of things:
- it introduces the else part of the ?: operator,
- it terminates a goto label,
- it terminates the case value,
- it separates the identifier from the bit size on bit fields, and
- it is used to introduce option types in asm().
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Thu, 24 Jul 2008 04:29:03 +0000 (21:29 -0700)]
checkpatch: toughen trailing if statement checks and extend them to while and for
Extend the trailing statement checks to report a trailing semi-colon ';'
as we really want it on the next line and indented so it is really really
obvious. Also extend the tests to include while and for.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Thu, 24 Jul 2008 04:29:01 +0000 (21:29 -0700)]
checkpatch: trailing statement indent: fix end of statement location
Fix end of statement location. Where the last line of the statement is
replaced we are miss reporting the newly added replacement an incorrectly
indented trailing statement for the negative context. We are also
incorrectly reporting negative statements generally.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Thu, 24 Jul 2008 04:29:00 +0000 (21:29 -0700)]
checkpatch: macros: fix statement counting block end detection
We are incorrectly counting the lines in a block while accumulating
the trailing lines in a macro statement, leading to false positives.
Fix end of block handling and general counting for negative context lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Thu, 24 Jul 2008 04:28:57 +0000 (21:28 -0700)]
checkpatch: types: some types may also be identifiers
Some types such as typedefs may overlap real identifiers. Be more
targetted about when a type can really exist. Where it cannot let it be
an identifier. This prevents false reporting of the minus '-' in unary
context in the following:
foo[bar->bool - 1];
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
atmel_pwm: set up only one PWM clock when allocating a clock
This patch will only setup one clock, if free, and return this clock to the
caller. The previous solution would setup both clocks with the same prescaler
and divider and return PWM_CPR_CLKB, thus taking both clocks in the same call
without the caller knowing.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generic irqs: handle failure of irqchip->set_type in setup_irq
set_type returns an int indicating success or failure, but up to now
setup_irq ignores that.
In my case this resulted in a machine hang:
gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but
arm/ns9xxx can only trigger on one direction so set_type didn't touch
the configuration which happens do default to a level sensitiveness and
returned -EINVAL. setup_irq ignored that and unmasked the irq. This
resulted in an endless triggering of the gpio-key interrupt service
routine which effectively killed the machine.
With this patch applied setup_irq propagates the error to the caller.
Note that before in the case
chip && !chip->set_type && !chip->name
a NULL pointer was feed to printk. This is fixed, too.
Adrian Bunk [Thu, 24 Jul 2008 04:28:50 +0000 (21:28 -0700)]
remove the v850 port
Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.
There also seems to be noone willing to bring this port back into a usable
state.
This patch therefore removes the v850 port.
If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.
Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Thu, 24 Jul 2008 04:28:49 +0000 (21:28 -0700)]
UML: make several more things static
- Make some variables and functions static, since they don't need to be
global.
- Remove an unused function - arch/um/kernel/time.c::sched_clock().
- Clean the style a bit as complained by checkpatch.pl.
Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Thu, 24 Jul 2008 04:28:49 +0000 (21:28 -0700)]
arch/um/kernel/mem.c: remove arch_validate()
- Remove arch_validate(), because no one uses it.
- Remove useless macro HAVE_ARCH_VALIDATE.
- Make the variable 'empty_bad_page' static.
Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Thu, 24 Jul 2008 04:28:47 +0000 (21:28 -0700)]
arch/um/kernel/irq.c: clean up some functions
Make activate_fd() and free_irq_by_irq_and_dev() static. Remove
init_aio_irq() since it has no users.
Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Thu, 24 Jul 2008 04:28:45 +0000 (21:28 -0700)]
mn10300: move sg_dma_{address,len}() to asm/scatterlist.h
mn10300 was the only architecture where sg_dma_{address,len}() were not
in asm/scatterlist.h, and it's not a big surprise that this caused a
compile error somewhere:
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/videobuf-dma-sg.c: In function `videobuf_dma_map':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/videobuf-dma-sg.c:238: error: implicit declaration of function 'sg_dma_address'
Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Thu, 24 Jul 2008 04:28:44 +0000 (21:28 -0700)]
pm: fix try_to_freeze_tasks()'s use of do_div()
Fix try_to_freeze_tasks()'s use of do_div() on an s64 by making
elapsed_csecs64 a u64 instead and dividing that.
Possibly this should be guarded lest the interval calculation turn up
negative, but the possible negativity of the result of the division is
cast away anyway.
Carlos Corbacho [Thu, 24 Jul 2008 04:28:43 +0000 (21:28 -0700)]
pm: acpi pm: add DMI quirk list for ACPI 1.0 suspend ordering
There are a few BIOSes that we know of already that need to use the ACPI 1.0
suspend order. This appears to be only be a small minority of mostly nVidia
based systems.
Based on observation of Windows behaviour, it's clear that Windows is also
doing maintaining its own list of broken hardware that needs this workaround.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Len Brown <lenb@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shaohua Li [Thu, 24 Jul 2008 04:28:41 +0000 (21:28 -0700)]
pm: acpi hibernation: utilize hardware signature
ACPI defines a hardware signature. BIOS calculates the signature according to
hardware configure and if hardware changes while hibernated, the signature
will change. In that case, S4 resume should fail.
Still, there may be systems on which this mechanism does not work correctly,
so it is better to provide a workaround for them. For this reason, add a new
switch to the acpi_sleep= command line argument allowing one to disable
hardware signature checking.
[shaohua.li@intel.com: build fix] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Len Brown <lenb@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: <Valdis.Kletnieks@vt.edu> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysrq poweroff needs to disable nonboot cpus, and we need to run this on boot
cpu to avoid any recursion. http://bugzilla.kernel.org/show_bug.cgi?id=10897
[kosaki.motohiro@jp.fujitsu.com: build fix] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Rus <harbour@sfinx.od.ua> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pm: introduce new interfaces schedule_work_on() and queue_work_on()
This interface allows adding a job on a specific cpu.
Although a work struct on a cpu will be scheduled to other cpu if the cpu
dies, there is a recursion if a work task tries to offline the cpu it's
running on. we need to schedule the task to a specific cpu in this case.
http://bugzilla.kernel.org/show_bug.cgi?id=10897
[oleg@tv-sign.ru: cleanups] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Rus <harbour@sfinx.od.ua> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Thu, 24 Jul 2008 04:28:38 +0000 (21:28 -0700)]
pm: hibernation: simplify memory bitmap
This patch simplifies the memory bitmap manipulations.
- remove the member size in struct bm_block
It is not necessary for struct bm_block to have the number of bit chunks that
can be calculated by using end_pfn and start_pfn.
- use find_next_bit() for memory_bm_next_pfn
No need to invent the bitmap library only for the memory bitmap.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Stern [Thu, 24 Jul 2008 04:28:37 +0000 (21:28 -0700)]
pm: add new PM_EVENT codes for runtime power transitions
This patch (as1112) adds some new PM_EVENT_* codes for use by kernel
subsystems. They describe runtime power-state transitions of the sort already
implemented by the USB subsystem.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop unnecessary includes from include/linux/pm.h .
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The majority of contents of Documentation/power/pm.txt are
outdated. Remove the outdated parts of this file and move the rest
to Documentation/power/apm-acpi.txt . Update the index in
Documentation/power/ as appropriate.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pm: remove remaining obsolete definitions from pm.h
Remove the remaining obsolete definitions from include/linux/pm.h and move
the definitions of PM_SUSPEND and PM_RESUME to the header of h3600 which
is the only user of them.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the definition of 'struct pm_dev', which is not used any more,
along with some related stuff from include/linux/pm.h .
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Thu, 24 Jul 2008 04:28:34 +0000 (21:28 -0700)]
remove include/linux/pm_legacy.h
Remove the obsolete and no longer used include/linux/pm_legacy.h
Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Pavel Machek <pavel@suse.cz> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Thu, 24 Jul 2008 04:28:33 +0000 (21:28 -0700)]
pm: boot time suspend selftest
Boot-time test for system suspend states (STR or standby). The generic
RTC framework triggers wakeup alarms, which are used to exit those states.
- Measures some aspects of suspend time ... this uses "jiffies" until
someone converts it to use a timebase that works properly even while
timer IRQs are disabled.
- Triggered by a command line parameter. By default nothing even
vaguely troublesome will happen, but "test_suspend=mem" will give
you a brief STR test during system boot. (Or you may need to use
"test_suspend=standby" instead, if your hardware needs that.)
This isn't without problems. It fires early enough during boot that for
example both PCMCIA and MMC stacks have misbehaved. The workaround in
those cases was to boot without such media cards inserted.
[matthltc@us.ibm.com: fix compile failure in boot time suspend selftest] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pavel Machek <pavel@suse.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Machek [Thu, 24 Jul 2008 04:28:32 +0000 (21:28 -0700)]
swsusp: provide users with a hint about the no_console_suspend option
Tell the user about the no_console_suspend option, so that we don't have to
tell each bug reporter personally.
[akpm@linux-foundation.org: clarify the text a little] Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Thu, 24 Jul 2008 04:28:29 +0000 (21:28 -0700)]
alpha: remove the unused ALPHA_CORE_AGP option
The real option is named AGP_ALPHA_CORE.
Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gigaset: gigaset_isowbuf_getbytes() may return signed unnoticed
ifd->offset is unsigned. gigaset_isowbuf_getbytes() may return signed
unnoticed. Revised version of patch originally submitted by Roel Kluin
<12o3l@tiscali.nl>.
The info() / warn() / err() macros from usb.h for generating kernel
messages are considered inferior to dev_info() / dev_warn() / dev_err()
from device.h. Replace them where possible. Also correct the severity
level and improve the text of one message.
Andrew G. Morgan [Thu, 24 Jul 2008 04:28:25 +0000 (21:28 -0700)]
security: filesystem capabilities no longer experimental
Filesystem capabilities have come of age. Remove the experimental tag for
configuring filesystem capabilities.
Signed-off-by: Andrew G. Morgan <morgan@kernel.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To date, we've tried hard to confine filesystem support for capabilities
to the security modules. This has left a lot of the code in
kernel/capability.c in a state where it looks like it supports something
that filesystem support for capabilities actually suppresses when the LSM
security/commmoncap.c code runs. What is left is a lot of code that uses
sub-optimal locking in the main kernel
With this change we refactor the main kernel code and make it explicit
which locks are needed and that the only remaining kernel races in this
area are associated with non-filesystem capability code.
Signed-off-by: Andrew G. Morgan <morgan@kernel.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew G. Morgan [Thu, 24 Jul 2008 04:28:24 +0000 (21:28 -0700)]
security: protect legacy applications from executing with insufficient privilege
When cap_bset suppresses some of the forced (fP) capabilities of a file,
it is generally only safe to execute the program if it understands how to
recognize it doesn't have enough privilege to work correctly. For legacy
applications (fE!=0), which have no non-destructive way to determine that
they are missing privilege, we fail to execute (EPERM) any executable that
requires fP capabilities, but would otherwise get pP' < fP. This is a
fail-safe permission check.
For some discussion of why it is problematic for (legacy) privileged
applications to run with less than the set of capabilities requested for
them, see:
With this iteration of this support, we do not include setuid-0 based
privilege protection from the bounding set. That is, the admin can still
(ab)use the bounding set to suppress the privileges of a setuid-0 program.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: cleanup] Signed-off-by: Andrew G. Morgan <morgan@kernel.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vegard Nossum has noticed the ever-decreasing negative priority in a
swapon /swapoff loop, which eventually would misprioritize when int wraps
positive. Not worth spending much code on, but probably better fixed.
It's easy to handle the swapping on and off of just one area, but there's
not much point if a pair or more still misbehave. To handle the general
case, swapoff should compact negative priorities, keeping them always from
-1 to -MAX_SWAPFILES. That's a change, but should cause no regression,
since these negative (unspecified) priorities are disjoint from the the
positive specified priorities 0 to 32767.
One small functional difference, which seems appropriate: when swapoff
fails to free all swap from a negative priority area, that area is now
reinserted at lowest priority, rather than at its original priority.
In moving down swapon's setting of priority, I notice that an area is
visible to /proc/swaps when it has swap_map set, yet that was being set
before all the visible fields were properly filled in: corrected.
mm: make CONFIG_MIGRATION available w/o CONFIG_NUMA
We'd like to support CONFIG_MEMORY_HOTREMOVE on s390, which depends on
CONFIG_MIGRATION. So far, CONFIG_MIGRATION is only available with NUMA
support.
This patch makes CONFIG_MIGRATION selectable for architectures that define
ARCH_ENABLE_MEMORY_HOTREMOVE. When MIGRATION is enabled w/o NUMA, the
kernel won't compile because migrate_vmas() does not know about
vm_ops->migrate() and vma_migratable() does not know about policy_zone.
To fix this, those two functions can be restricted to '#ifdef CONFIG_NUMA'
because they are not being used w/o NUMA. vma_migratable() is moved over
from migrate.h to mempolicy.h.
Milton Miller [Thu, 24 Jul 2008 04:28:20 +0000 (21:28 -0700)]
kcalloc: remove runtime division
While in all cases in the kernel we know the size of the elements to be
created, we don't always know the count of elements. By commuting the size
and count in the overflow check, the compiler can reduce the runtime division
of size_t with a compare to a (unique) constant in these cases.
Signed-off-by: Milton Miller <miltonm@bga.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memory-hotplug: add sysfs removable attribute for hotplug memory remove
Memory may be hot-removed on a per-memory-block basis, particularly on
POWER where the SPARSEMEM section size often matches the memory-block
size. A user-level agent must be able to identify which sections of
memory are likely to be removable before attempting the potentially
expensive operation. This patch adds a file called "removable" to the
memory directory in sysfs to help such an agent. In this patch, a memory
block is considered removable if;
o It contains only MOVABLE pageblocks
o It contains only pageblocks with free pages regardless of pageblock type
On the other hand, a memory block starting with a PageReserved() page will
never be considered removable. Without this patch, the user-agent is
forced to choose a memory block to remove randomly.
Kent Liu [Thu, 24 Jul 2008 04:28:18 +0000 (21:28 -0700)]
memory-hotplug: don't calculate vm_total_pages twice when rebuilding zonelists in online_pages()
If zonelist is required to be rebuilt in online_pages(), there is no need
to recalculate vm_total_pages in that function, as it has been updated in
the call build_all_zonelists().
Signed-off-by: Kent Liu <kent.liu@linux.intel.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log