Use the new --systz option in the udev rule for /dev/rtc0, stepping the
clock if the hardware clock wasn't in localtime and updating the kernel
timezone.
Since udev can directly import /etc/default/rcS to get the UTC and
BADYEAR settings, we don't need a wrapper shell script for this saving a
bit of time.
Chris Webb [Wed, 13 May 2009 14:54:23 +0000 (15:54 +0100)]
fdisk: (and cfdisk) fix to be consistent about maximum heads
Fix fdisk and cfdisk to be consistent about maximum heads
Without this patch, fdisk allows up to 256 heads to be set via the menu, but
only up to 255 heads by command line -H. Similarly, cfdisk's -H option also
enforces heads <= 255 instead of heads <= 256.
The strange limit of 256 comes about because (heads - 1) should fit in a
single byte for legacy CHS. Geometries of 256 heads and 32 sectors are seen
in disks from other operating systems where cylinder-aligned partitions
which are also aligned to a 4MB boundary are wanted.
Karel Zak [Thu, 14 May 2009 16:29:03 +0000 (18:29 +0200)]
blkid: blkid_do_safeprobe() has to be tolerant to RAIDs
It's pretty generic that RAID signature is on the same device as FS
signature. We have to be tolerant and ignore filesystems signatures
on such devices. The RAID signature is always preferred.
Karel Zak [Thu, 14 May 2009 16:04:55 +0000 (18:04 +0200)]
blkid: fix "hangs forever with partition type mdraid"
> #:> blkid /dev/sda7
> /dev/sda7: UUID="c193d159-1fd4-1a4b-4037-f3433e016f3d" TYPE="mdraid"
>
> The blkid binary build from the util-linux-ng sources just hangs
> forever with 100% cpu load with the same command.
Reported-by: Juergen Daubert <jue@jue.li> Signed-off-by: Karel Zak <kzak@redhat.com>
Mike Frysinger [Sun, 10 May 2009 20:57:31 +0000 (16:57 -0400)]
losetup: handle symlinks in /dev/loop/
The loop_scandir() expects all the files in /dev/loop/ to be actual
devices and not symlinks to devices. However, udev by default sets up
symlinks in /dev/loop/ thereby breaking the fallback scan logic when
looking for devices more than the default number of 8.
Simple way to reproduce is:
- <detach all devices>
- cd /dev/loop
- rm -f [2-7]
- losetup 0 autogen.sh
- mv 1 8
- for n in {1..7} ; do ln -s 0 $n ; done
- losetup -f
<error but should have found /dev/loop/8>
[kay.sievers@vrfy.org:
just a note, udev does not do that by default. It is
devfs-nonsense, which the "default" never did.]
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reported-by: Mario Bachmann <grafgrimm77@gmx.de>
Mike Frysinger [Sun, 10 May 2009 20:37:18 +0000 (16:37 -0400)]
lscpu: fix cpuid code on x86/PIC
If we build lscpu as PIE, we currently get a build failure:
lscpu.c: In function 'main':
lscpu.c:333: error: can't find a register in class 'BREG' while reloading 'asm'
lscpu.c:333: error: 'asm' operand has impossible constraints
make[2]: *** [lscpu.o] Error 1
So we need a little bit of register shuffling to keep gcc happy.
chrt: don't assume SCHED_BATCH and SCHED_IDLE exist
SCHED_FIFO, SCHED_OTHER, SCHED_RR are part of POSIX 1003.1b Process
Scheduling, so it is correct to assume they always exists.
SCHED_BATCH and SCHED_IDLE are Linux specific, we should not assume
they exists.
Defining SCHED_BATCH and SCHED_IDLE to random values (ie the ones found
on Linux systems) is not an option as they may *collide* with the one of
other systems. For example on GNU/kFreeBSD we have:
#define SCHED_RR 3
and on Linux we have:
#define SCHED_BATCH 3
[kzak@redhat.com: - add "Linux specific" notes to chrt.1
- add a note about BATCH and PR conflict to
this commit message]
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Karel Zak <kzak@redhat.com>
chrt: don't assume SCHED_BATCH and SCHED_IDLE exist
SCHED_FIFO, SCHED_OTHER, SCHED_RR are part of POSIX 1003.1b Process
Scheduling, so it is correct to assume they always exists.
SCHED_BATCH and SCHED_IDLE are Linux specific, we should not assume
they exists.
Defining SCHED_BATCH and SCHED_IDLE to random values (ie the ones found
on Linux systems) is not an option as they may *collide* with the one of
other systems. For example on GNU/kFreeBSD we have:
#define SCHED_RR 3
and on Linux we have:
#define SCHED_BATCH 3
[kzak@redhat.com: - add "Linux specific" notes to chrt.1
- add a note about BATCH and PR conflict to
this commit message]
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Karel Zak <kzak@redhat.com>
Karel Zak [Tue, 5 May 2009 19:40:19 +0000 (21:40 +0200)]
blkid: use /dev/mapper/<name> rather than /dev/dm-<N>
The libblkid (since v1.41.1) returns private device-mapper names (e.g.
/dev/dm-0). It's because the probe_one() function scans /dev before
/dev/mapper.
brw-rw---- 1 root disk 253, 0 2009-04-27 13:41 /dev/dm-0
brw-rw---- 1 root disk 253, 0 2009-04-27 13:41 /dev/mapper/TestVolGroup-TestLogVolume
Old version:
# blkid -t LABEL="TEST-LABEL" -o device
/dev/dm-0
There can always be more than one, and the first is generally /dev/rtc0
not /dev/rtc (unless udev has made a symlink - which it only does for
the CMOS driver).
Use --rtc=/dev/rtc0 on each call, letting the rtc0 bit be customised at
the top of the shell script
hwclock: pass --noadjfile if /etc/adjtime not writable
This wasn't quite consistent; while --noadjfile would be passed on
setting the system clock, it wasn't passed when setting the hardware
clock or when showing the current value - so could result in it being
updated.
Karel Zak [Tue, 28 Apr 2009 20:51:53 +0000 (22:51 +0200)]
blkid: split SONAME and LIBBLKID_VERSION
It seems better to split SONAME and the public library version. The
library version will be the same as util-linux-ng PACKAGE_VERSION.
PACKAGE_VERSION: <maj>.<min>[-<suffix>] e.g. 2.15-rc2
Symbols versioning: BLKID_<maj>.<min> e.g. BLKID_2.15
blkid_get_library_version(): <maj>.<min>.0 e.g. 2.15.0
SONAME: libblkid.so.1
Eric Sandeen [Fri, 24 Apr 2009 19:08:45 +0000 (21:08 +0200)]
blkid: remove whole-disk entries from cache when partitions are found
We can get into a situation in blkid where whole disks remain
in the cache, even though partitions are found. For labels
such as sun disklabels which may have the first partition
beginning at sector 0, this is even somewhat likely.
1) create a sun disklabel w/partitions
2) mkfs the first partition (at sector 0)
3) remove the partition table
4) run blkid - this finds the fs on the whole disk, places in cache
5) recreate the partition table
6) run blkid - this finds the partition, places in cache
And now we have both /dev/sda and /dev/sda1 in cache.
There are heuristics in probe_all to avoid putting the whole disk
in cache if it has partitions, but there is nothing to remove the
whole-disk entry in the above case. I think the below patch
suffices, although I haven't quite convinced myself that setting
the lens[which]=0; is the right logic for that bit of state...
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Karel Zak <kzak@redhat.com>
Karel Zak [Fri, 10 Apr 2009 09:02:24 +0000 (11:02 +0200)]
login: use open(2) rather then access(2) for $HOME/.hushlogin
As an NFS client with home directories on mounted NFS share - If the
NFS server exports the share with default root squashed, login cannot
access the filesystem to check for the existence of .hushlogin file.
It seems better to use open(2) rather than access(2).
Matthew Garrett [Fri, 27 Mar 2009 00:47:22 +0000 (00:47 +0000)]
mount: Add strictatime support
2.6.30 adds (patch d0adde574b8487ef30f69e2d08bba769e4be513f) support for a
strictatime mount parameter, used to request strict atime update semantics. The
following patch adds support for it to mount.
projects / util-linux / log