Dave Kleikamp [Thu, 18 Jan 2007 03:18:35 +0000 (21:18 -0600)]
JFS: call io_schedule() instead of schedule() to avoid deadlock
The introduction of Jens Axboe's explicit i/o plugging patches introduced a
deadlock in jfs. This was caused by the process initiating I/O not
unplugging the queue before waiting on the commit thread. The commit
thread itself was waiting for that I/O to complete. Calling io_schedule()
rather than schedule() unplugs the I/O queue avoiding the deadlock, and it
appears to be the right function to call in any case.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Dave Kleikamp [Tue, 9 Jan 2007 14:57:34 +0000 (08:57 -0600)]
JFS: Avoid BUG() on a damaged file system
On Mon, 2006-12-18 at 19:51 +0100, Eric Sesterhenn wrote:
> hi,
>
> while playing around with fsfuzzer, i got the following oops with jfs:
>
> [ 851.804875] BUG at fs/jfs/jfs_xtree.c:760
> assert(!BT_STACK_FULL(btstack))
> [ 851.805179] ------------[ cut here ]------------
> [ 851.805238] kernel BUG at fs/jfs/jfs_xtree.c:760!
JFS should mark the superblock dirty and return an error rather than
calling BUG().
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Linus Torvalds [Mon, 8 Jan 2007 23:04:46 +0000 (15:04 -0800)]
Revert "[PATCH] x86-64: Try multiple timer variants in check_timer"
This reverts commit b026872601976f666bae77b609dc490d1834bf77, which has
been linked to several problem reports with IO-APIC and the timer.
Machines either don't boot because the timer doesn't happen, or we get
double timer interrupts because we end up double-routing the timer irq
through multiple interfaces.
Patches to fix this cleanup exist (and have been confirmed to work fine
at least for some of the affected cases) and we'll revisit it for
2.6.21, but this late in the -rc series we're better off just reverting
the incomplete commit that caused the problems.
Suggested-by: Adrian Bunk <bunk@stusta.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Yinghai Lu <yinghai.lu@amd.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Vitaly Wool [Thu, 28 Dec 2006 14:14:05 +0000 (17:14 +0300)]
[MIPS] PNX8550: Fix system timer support
the patch inlined below restores proper time accounting for PNX8550-based
boards. It also gets rid of #ifdef in the generic code which becomes
unnecessary then.
It's functionally identical to the previous patch with the same name but
it has minor comments from Atsushi and Sergei taken into account.
Atsushi Nemoto [Sun, 17 Dec 2006 15:38:21 +0000 (00:38 +0900)]
[MIPS] TX49: Fix use of CDEX build_store_reg()
The commit a923660d786a53e78834b19062f7af2535f7f8ad accidently
prevents TX49 from using CDEX. Use build_dst_pref() only if prefetch
for store was really available.
Davy Chan [Fri, 5 Jan 2007 05:56:46 +0000 (13:56 +0800)]
[MIPS] pnx8550: Fix write_config_byte() PCI config space accessor
There's a serious typo in the function:
arch/mips/pci/ops-pnx8550.c:write_config_byte()
The parameter passed to the function config_access() is PCI_CMD_CONFIG_READ
instead of PCI_CMD_CONFIG_WRITE. This renders any attempts to write
a single byte to the PCI configuration registers useless.
This problem does not exist for write_config_word() nor write_config_dword().
This problem has been there since kernel v2.6.17 and is still there
as of kernel v2.6.19.1.
Atsushi Nemoto [Tue, 12 Dec 2006 16:22:06 +0000 (01:22 +0900)]
[MIPS] csum_partial and copy in parallel
Implement optimized asm version of csum_partial_copy_nocheck,
csum_partial_copy_from_user and csum_and_copy_to_user which can do
calculate and copy in parallel, based on memcpy.S.
Russell King [Mon, 8 Jan 2007 19:49:12 +0000 (19:49 +0000)]
[ARM] Provide basic printk_clock() implementation
Current sched_clock() implementations on ARM cause unbootable kernels
with PRINTK_TIME support enabled. To avoid this, provide a basic
printk_clock() implementation which avoids sched_clock() being called
before the page tables have been set up.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 30 Dec 2006 23:17:40 +0000 (23:17 +0000)]
[ARM] Resolve fuse and direct-IO failures due to missing cache flushes
fuse does not work on ARM due to cache incoherency issues - fuse wants
to use get_user_pages() to copy data from the current process into
kernel space. However, since this accesses userspace via the kernel
mapping, the kernel mapping can be out of date wrt data written to
userspace.
This can lead to unpredictable behaviour (in the case of fuse) or data
corruption for direct-IO.
This resolves debian bug #402876
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 30 Dec 2006 22:24:19 +0000 (22:24 +0000)]
[ARM] pass vma for flush_anon_page()
Since get_user_pages() may be used with processes other than the
current process and calls flush_anon_page(), flush_anon_page() has to
cope in some way with non-current processes.
It may not be appropriate, or even desirable to flush a region of
virtual memory cache in the current process when that is different to
the process that we want the flush to occur for.
Therefore, pass the vma into flush_anon_page() so that the architecture
can work out whether the 'vmaddr' is for the current process or not.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 8 Jan 2007 16:42:51 +0000 (16:42 +0000)]
[ARM] Fix potential MMCI bug
The MMCI driver might end up aborting the initial command and leaving
the data part of the command sequence still in place. Avoid this
problem by ensuring that any data sequence is properly cleared out
when a command completes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
If the kernel attempts to execute a CP1 or CP2 instruction and it
aborts, and a FP emulator is not loaded, we try to return as if to
a user context, instead of the proper kernel context. Since the
fault came from kernel mode, we must use the kernel return paths.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hugh Dickins reports that it causes random failures on x86 with SuSE
10.2, and points out
"Isn't that randomization, anywhere from 0x10000 to ELF_ET_DYN_BASE,
sure to place the ET_DYN from time to time just where the comment
says it's trying to avoid? I assume that somehow results in the error
reported."
(where the comment in question is the existing comment in the source
code about mmap/brk clashes).
Suggested-by: Hugh Dickins <hugh@veritas.com> Acked-by: Marcus Meissner <meissner@suse.de> Cc: Andrew Morton <akpm@osdl.org> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: asix: Fix AX88772 device PHY selection
USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printers
sisusb_con warning fixes
USB: Fixed bug in endpoint release function.
USB: small update to Documentation/usb/acm.txt
USB storage: fix ipod ejecting issue
USB Storage: unusual_devs: add supertop drives
USB: omap_udc build fixes (sync with linux-omap)
USB: funsoft is borken on sparc
USB: fix interaction between different interfaces in an "Option" usb device
UHCI: support device_may_wakeup
UHCI: make test for ASUS motherboard more specific
Linus Torvalds [Sat, 6 Jan 2007 08:09:14 +0000 (00:09 -0800)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c/m41t00: Do not forget to write year
i2c-mv64xxx: Fix random oops at boot
i2c: Migration aids for i2c_adapter.dev removal
i2c-pnx: Add entry to MAINTAINERS
i2c-pnx: Fix interrupt handler, get rid of EARLY config option
Looks like this is the problem, which point Al Viro some time ago:
ufs's get_block callback allocates 16k of disk at a time, and links that
entire 16k into the file's metadata. But because get_block is called for only
a single buffer_head (a 2k buffer_head in this case?) we are only able to tell
the VFS that this 2k is buffer_new().
So when ufs_getfrag_block() is later called to map some more data in the file,
and when that data resides within the remaining 14k of this fragment,
ufs_getfrag_block() will incorrectly return a !buffer_new() buffer_head.
I don't see _right_ way to do nullification of whole block, if use inode
page cache, some pages may be outside of inode limits (inode size), and
will be lost; if use blockdev page cache it is possible to zero real data,
if later inode page cache will be used.
The simpliest way, as can I see usage of block device page cache, but not only
mark dirty, but also sync it during "nullification". I use my simple tests
collection, which I used for check that create,open,write,read,close works on
ufs, and I see that this patch makes ufs code 18% slower then before.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Sat, 6 Jan 2007 00:37:03 +0000 (16:37 -0800)]
[PATCH] fix OOM killing of swapoff
These days, if you swapoff when there isn't enough memory, OOM killer gives
"BUG: scheduling while atomic" and the machine hangs: badness() needs to do
its PF_SWAPOFF return after the task_unlock (tasklist_lock is also held
here, so p isn't going to be freed: PF_SWAPOFF might get turned off at any
moment, but that doesn't really matter).
[PATCH] fix the toshiba_acpi write_lcd return value
write_lcd() in toshiba_acpi returns 0 on success since the big ACPI patch
merged in 2.6.20-rc2. It should return count.
Signed-off-by: Matthijs van Otterdijk <thotter@gmail.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Both process_zones() and drain_node_pages() check for populated zones
before touching pagesets. However, __drain_pages does not do so,
This may result in a NULL pointer dereference for pagesets in unpopulated
zones if a NUMA setup is combined with cpu hotplug.
Initially the unpopulated zone has the pcp pointers pointing to the boot
pagesets. Since the zone is not populated the boot pageset pointers will
not be changed during page allocator and slab bootstrap.
If a cpu is later brought down (first call to __drain_pages()) then the pcp
pointers for cpus in unpopulated zones are set to NULL since __drain_pages
does not first check for an unpopulated zone.
If the cpu is then brought up again then we call process_zones() which will
ignore the unpopulated zone. So the pageset pointers will still be NULL.
If the cpu is then again brought down then __drain_pages will attempt to
drain pages by following the NULL pageset pointer for unpopulated zones.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan [Sat, 6 Jan 2007 00:37:01 +0000 (16:37 -0800)]
[PATCH] hpt37x: Two important bug fixes
The HPT37x driver very carefully handles DMA completions and the needed
fixups are done on pci registers 0x50 and 0x52. This is unfortunate
because the actual registers are 0x50 and 0x54. Fixing this offset cures
the second channel problems reported.
Secondly there are some problems with the HPT370 and certain ATA drives.
The filter code however only filters ATAPI devices due to a reversed type
check.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:53 +0000 (16:36 -0800)]
[PATCH] KVM: MMU: Replace atomic allocations by preallocated objects
The mmu sometimes needs memory for reverse mapping and parent pte chains.
however, we can't allocate from within the mmu because of the atomic context.
So, move the allocations to a central place that can be executed before the
main mmu machinery, where we can bail out on failure before any damage is
done.
(error handling is deffered for now, but the basic structure is there)
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In fork() (or when we protect a page that is no longer a page table), we can
experience floods of writes to a page, which have to be emulated. This is
expensive.
So, if we detect such a flood, zap the page so subsequent writes can proceed
natively.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:47 +0000 (16:36 -0800)]
[PATCH] KVM: MMU: Remove invlpg interception
Since we write protect shadowed guest page tables, there is no need to trap
page invalidations (the guest will always change the mapping before issuing
the invlpg instruction).
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:45 +0000 (16:36 -0800)]
[PATCH] KVM: MMU: If emulating an instruction fails, try unprotecting the page
A page table may have been recycled into a regular page, and so any
instruction can be executed on it. Unprotect the page and let the cpu do its
thing.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:44 +0000 (16:36 -0800)]
[PATCH] KVM: MMU: Let the walker extract the target page gfn from the pte
This fixes a problem where set_pte_common() looked for shadowed pages based on
the page directory gfn (a huge page) instead of the actual gfn being mapped.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:43 +0000 (16:36 -0800)]
[PATCH] KVM: MMU: Write protect guest pages when a shadow is created for them
When we cache a guest page table into a shadow page table, we need to prevent
further access to that page by the guest, as that would render the cache
incoherent.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:43 +0000 (16:36 -0800)]
[PATCH] KVM: MMU: Shadow page table caching
Define a hashtable for caching shadow page tables. Look up the cache on
context switch (cr3 change) or during page faults.
The key to the cache is a combination of
- the guest page table frame number
- the number of paging levels in the guest
* we can cache real mode, 32-bit mode, pae, and long mode page
tables simultaneously. this is useful for smp bootup.
- the guest page table table
* some kernels use a page as both a page table and a page directory. this
allows multiple shadow pages to exist for that page, one per level
- the "quadrant"
* 32-bit mode page tables span 4MB, whereas a shadow page table spans
2MB. similarly, a 32-bit page directory spans 4GB, while a shadow
page directory spans 1GB. the quadrant allows caching up to 4 shadow page
tables for one guest page in one level.
- a "metaphysical" bit
* for real mode, and for pse pages, there is no guest page table, so set
the bit to avoid write protecting the page.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:40 +0000 (16:36 -0800)]
[PATCH] KVM: MU: Special treatment for shadow pae root pages
Since we're not going to cache the pae-mode shadow root pages, allocate a
single pae shadow that will hold the four lower-level pages, which will act as
roots.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:40 +0000 (16:36 -0800)]
[PATCH] KVM: MMU: Fold fetch_guest() into init_walker()
It is never necessary to fetch a guest entry from an intermediate page table
level (except for large pages), so avoid some confusion by always descending
into the lowest possible level.
Rename init_walker() to walk_addr() as it is no longer restricted to
initialization.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Keep in each host page frame's page->private a pointer to the shadow pte which
maps it. If there are multiple shadow ptes mapping the page, set bit 0 of
page->private, and use the rest as a pointer to a linked list of all such
mappings.
Reverse mappings are needed because we when we cache shadow page tables, we
must protect the guest page tables from being modified by the guest, as that
would invalidate the cached ptes.
Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avi Kivity [Sat, 6 Jan 2007 00:36:38 +0000 (16:36 -0800)]
[PATCH] KVM: Prevent stale bits in cr0 and cr4
Hardware virtualization implementations allow the guests to freely change some
of the bits in cr0 and cr4, but trap when changing the other bits. This is
useful to avoid excessive exits due to changing, for example, the ts flag.
It also means the kvm's copy of cr0 and cr4 may be stale with respect to these
bits. most of the time this doesn't matter as these bits are not very
interesting. Other times, however (for example when returning cr0 to
userspace), they are, so get the fresh contents of these bits from the guest
by means of a new arch operation.
Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Brownell [Sat, 6 Jan 2007 00:36:37 +0000 (16:36 -0800)]
[PATCH] Update the rtc-rs5c372 driver
Bugfixes:
- Handle RTCs which are configured to use 12-hour mode.
- Never report bogus/un-initialized times.
- Displaying "raw trim" requires not masking it first!
- Fix the sysfs and procfs display of crystal and trim data.
Features:
- Handle other RTCs in this family, notably rv5c386/rv5c387.
- Declare the other registers.
- Provide alarm get/set functionality.
- Handle AIE and UIE; but no IRQ handling yet.
Cleanup:
- Shrink object by not including needless sysfs or procfs support
- We don't need no steenkin' forward declarations. (Except one.)
Until the I2C framework merges "new style" driver support, matching
the driver model better, using rv5c chips or alarm IRQs requires a
separate board-specific patch. (And an IRQ handler, handing off labor
through a work_struct...)
This uses the "method 3" register reads, but notes that it's done
to work around an evident i2c adapter driver bug.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Sat, 6 Jan 2007 00:36:36 +0000 (16:36 -0800)]
[PATCH] fix BUG_ON(!PageSlab) from fallback_alloc
pdflush hit the BUG_ON(!PageSlab(page)) in kmem_freepages called from
fallback_alloc: cache_grow already freed those pages when alloc_slabmgmt
failed. But it wouldn't have freed them if __GFP_NO_GROW, so make sure
fallback_alloc doesn't waste its time on that case.
Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Pekka J Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The problem here is that the void cast causes return types to not be
promoted, and for ops such as listxattr which expect more than 32 bits of
return value, the 32-bit -EIO is interpreted as a large positive 64-bit
number, i.e. 0x00000000fffffffa instead of 0xfffffffa.
This goes particularly badly when the return value is taken as a number of
bytes to copy into, say, a user's buffer for example...
I originally had coded up the fix by creating a return_EIO_<TYPE> macro
for each return type, like this:
but Al felt that it was probably better to create an EIO-returner for each
actual op signature. Since so few ops share a signature, I just went ahead
& created an EIO function for each individual file & inode op that returns
a value.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Sat, 6 Jan 2007 00:36:35 +0000 (16:36 -0800)]
[PATCH] ip2 warning fix
Make this:
drivers/char/ip2/ip2main.c: In function 'ip2_loadmain':
drivers/char/ip2/ip2main.c:654: warning: control may reach end of non-void function 'iiSetAddress' being inlined
drivers/char/ip2/ip2main.c:808: warning: control may reach end of non-void function 'iiInitialize' being inlined
go away.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Vivek Goyal [Sat, 6 Jan 2007 00:36:34 +0000 (16:36 -0800)]
[PATCH] i386: modpost smpboot code warning fix
o Currently synchronize_tsc_ap() is of type __init. It is called by
smp_callin() which is of type __cpuinit. So synchronize_tsc_ap()
should be of type __cpuinit.
o Modpost generates warnings for i386 if CONFIG_RELOCATABLE=y and
CONFIG_HOTPLUG_CPU=y
WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'start_secondary' (at offset 0xc01164dc) and 'initialize_secondary'
WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'start_secondary' (at offset 0xc01164e8) and 'initialize_secondary'
o tsc is of type __initdata. It should be of type __cpuinitdata.
Paul Mundt [Sat, 6 Jan 2007 00:36:30 +0000 (16:36 -0800)]
[PATCH] Sanely size hash tables when using large base pages
At the moment the inode/dentry cache hash tables (common by way of
alloc_large_system_hash()) are incorrectly sized by their respective
detection logic when we attempt to use large base pages on systems with
little memory.
This results in odd behaviour when using a 64kB PAGE_SIZE, such as:
o Relocatable bzImage support had got rid of CONFIG_PHYSICAL_START option
thinking that now this option is not required as people can build a
second kernel as relocatable and load it anywhere. So need of compiling
the kernel for a custom address was gone. But Magnus uses vmlinux images
for second kernel in Xen environment and he wants to continue to use
it.
o Restoring the CONFIG_PHYSICAL_START option for the time being. I think
down the line we can get rid of it.
[PATCH] swsusp: Do not fail if resume device is not set
In the kernels later than 2.6.19 there is a regression that makes swsusp
fail if the resume device is not explicitly specified.
It can be fixed by adding an additional parameter to
mm/swapfile.c:swap_type_of() allowing us to pass the (struct block_device
*) corresponding to the first available swap back to the caller.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
James Bursa [Sat, 6 Jan 2007 00:36:28 +0000 (16:36 -0800)]
[PATCH] adfs: fix filename handling
Fix filenames on adfs discs being terminated at the first character greater
than 128 (adfs filenames are Latin 1). I saw this problem when using a
loopback adfs image on a 2.6.17-rc5 x86_64 machine, and the patch fixed it
there.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan [Sat, 6 Jan 2007 00:36:27 +0000 (16:36 -0800)]
[PATCH] atiixp: Old drivers/ide layer driver for the ATIIXP hang fix
When the old IDE layer calls into methods in the driver during error
handling it is essentially random whether ide_lock is already held. This
causes a deadlock in the atiixp driver which also uses ide_lock internally
for locking.
Switch to a private lock instead.
[akpm@osl.org: cleanup] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is because the packet driver tries to send down read/write BLOCK_PC
commands that don't use a bio and do not use sg lists.
The right fix is to replace all the packet_command stuff in the packet
driver by scsi_execute() which needs to be lifted from scsi code to
the block code for that.
Fix the bug for now. It's not the full way to a generic execute block pc
infrastcuture but fixes the bug for the time being.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Brownell [Sat, 6 Jan 2007 00:36:25 +0000 (16:36 -0800)]
[PATCH] rtc-at91rm9200 build fix
The at91rm9200 RTC driver needs some assistance to build, because of recent
header file rearrangement.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dor Laor [Sat, 6 Jan 2007 00:36:24 +0000 (16:36 -0800)]
[PATCH] KVM: Improve interrupt response
The current interrupt injection mechanism might delay an interrupt under
the following circumstances:
- if injection fails because the guest is not interruptible (rflags.IF clear,
or after a 'mov ss' or 'sti' instruction). Userspace can check rflags,
but the other cases or not testable under the current API.
- if injection fails because of a fault during delivery. This probably
never happens under normal guests.
- if injection fails due to a physical interrupt causing a vmexit so that
it can be handled by the host.
In all cases the guest proceeds without processing the interrupt, reducing
the interactive feel and interrupt throughput of the guest.
This patch fixes the situation by allowing userspace to request an exit
when the 'interrupt window' opens, so that it can re-inject the interrupt
at the right time. Guest interactivity is very visibly improved.
Signed-off-by: Dor Laor <dor.laor@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Sat, 6 Jan 2007 00:36:23 +0000 (16:36 -0800)]
[PATCH] KVM: Fix GFP_KERNEL alloc in atomic section bug
KVM does kmalloc() in an atomic section while having preemption disabled via
vcpu_load(). Fix this by moving the ->*_msr setup from the vcpu_setup method
to the vcpu_create method.
(This is also a small speedup for setting up a vcpu, which can in theory be
more frequent than the vcpu_create method).
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6 / log