Hans de Goede [Sun, 4 Jun 2006 18:24:11 +0000 (20:24 +0200)]
[PATCH] abituguru: Fix fan detection
One of my testers had a problem where the driver only saw 2 of the 4 fan
sensors his uGuru has, this fixes this.
-accept 0x40 (bit 6) being high as a valid fan sensor setting for all fans
not just fan 1, I have a feeling this bit indicates whether or not a fan is
actually connected .
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hans de Goede [Sun, 4 Jun 2006 18:23:01 +0000 (20:23 +0200)]
[PATCH] abituguru: Review fixes
Fixes to the Abit uGuru driver as requested in review by Jean Delvare:
- exactly calculate the sysfs_names array length using macro
- use snprintf when generating names to double check that the sysfs_names
array does not overflow.
- use ARRAY_SIZE and / or defines to determine number of loops in for loops
instead of using hardcoded values.
- In abituguru_probe(), refactor the error path leaving a single call to kfree
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hans de Goede [Sun, 4 Jun 2006 18:22:24 +0000 (20:22 +0200)]
[PATCH] abituguru: New hardware monitoring driver
New hardware monitoring driver for the Abit uGuru
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yuan Mu [Sun, 4 Jun 2006 18:18:05 +0000 (20:18 +0200)]
[PATCH] w83792d: Fix setting the PWM value
W83792D use pwm register low 4 bits to store PWM/DC value, bit 7
is used to store fan PWM/DC mode. The store_pwm function did not
convert the pwm input correctly, so it may change the fan mode
when new value is set.
This fix the problem. Change the "index" value of pwm*_mode
and pwm* SENSOR_ATTR to simplify code.
Signed-off-by: Yuan Mu <ymu@winbond.com.tw> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 4 Jun 2006 18:13:01 +0000 (20:13 +0200)]
[PATCH] hwmon: Drop some maintainers entries
I no more wish to be listed as the maintainer for the smsc47m1 and
w83l785ts drivers. I have no test device, and people will fallback
to me as the general hardware monitoring maintainer anyway.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 4 Jun 2006 17:59:57 +0000 (19:59 +0200)]
[PATCH] i2c: Suggest N for rare devices in Kconfig
Improve the Kconfig help text of the follwing i2c drivers:
* busses/i2c-pca-isa.c
* chips/pcf8574.c
* chips/pcf8591.c
These are hard to detect and building them into the kernel
results in long delays at boot.
March 2006, thread "I2C_PCA_ISA causes boot delays"
http://marc.theaimsgroup.com/?l=linux-kernel&m=114360399415744&w=2
April 2006, thread "i2c-related 1-minute hang during bootup"
http://marc.theaimsgroup.com/?l=linux-kernel&m=114640992330721&w=2
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Charles Spirakis [Tue, 25 Apr 2006 12:21:03 +0000 (14:21 +0200)]
[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D
Add support for the w83791d sensor chip. The w83791d hardware is
somewhere between the w83781d and the w83792d and this driver code
is derived from the code that supports those chips.
Signed-off-by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 25 Apr 2006 12:20:11 +0000 (14:20 +0200)]
[PATCH] HWMON: hdaps: Update the list of supported systems
Update the list of systems supported by the hdaps driver:
* Add the "ThinkPad Z60m" entry, reported by Arkadiusz Miskiewicz.
* Add the "ThinkPad H" entry, reported by Frank Gevaerts for some
ThinkPad R52 models (1846AQG).
* Drop the "ThinkPad X41 Tablet" entry, which looks redundant to me.
And a comment update for good measure.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Arkadiusz Miskiewicz <arekm@maven.pl> Cc: Frank Gevaerts <frank@gevaerts.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 25 Apr 2006 12:18:16 +0000 (14:18 +0200)]
[PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55
Add support for the new nForce4 MCP51 (also known as nForce 410 or
430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes
were required because the base I/O address registers have changed in
these versions. Standard BARs are now being used, while the original
nForce2 chips used non-standard ones.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 25 Apr 2006 11:37:25 +0000 (13:37 +0200)]
[PATCH] I2C: i2c-piix4: Document the IBM problem more clearly
Properly document on which systems the i2c-piix4 SMBus driver will
refuse to load. Hopefully this will make it clearer for users, which
were often wondering why their destop or server systems were detected
as laptops.
Closes bug #6429.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rudolf Marek [Tue, 25 Apr 2006 11:06:41 +0000 (13:06 +0200)]
[PATCH] I2C: i2c-piix4: Remove the fix_hstcfg parameter
This patch removes the fix_hstcfg option from the driver and related
SMBus Interrupt Select register magic because now we know what are
valid values for this register. This patch updates the documentation
and adds new IRQ mode check so we are sure not to miss any new
"unusual" value.
The PCI quirk for users of fix_hstcfg was not developed because the
chipset lacks of subsystem ID registers and DMI is stated "To be
filled". Impact to existing systems is minimal because the problem
showed up on motherboards like 10 years back. On the other hand users
of newer Serverworks and HT1000 systems won't be misleaded by the
message suggesting to try the fix_hstcfg any more.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark A. Greer [Tue, 25 Apr 2006 11:04:54 +0000 (13:04 +0200)]
[PATCH] I2C: m41t00: Add support for the ST M41T81 and M41T85
This patch adds support for the ST m41t81 and m41t85 i2c rtc chips
to the existing m41t00 driver.
Since there is no way to reliably determine what type of rtc chip
is in use, the chip type is passed in via platform_data. The i2c
address and square wave frequency are passed in via platform_data
as well. To accommodate the use of platform_data, a new header
file include/linux/m41t00.h has been added.
The m41t81 and m41t85 chips halt the updating of their time registers
while they are being accessed. They resume when a stop condition
exists on the i2c bus or when non-time related regs are accessed.
To make the best use of that facility and to make more efficient
use of the i2c bus, this patch replaces multiple i2c_smbus_xxx calls
with a single i2c_transfer call.
Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark A. Greer [Fri, 31 Mar 2006 21:06:46 +0000 (23:06 +0200)]
[PATCH] i2c: cleanup m41t00
This patch does some cleanup to the m41t00 i2c/rtc driver including:
- use BCD2BIN/BIN2BCD instead of BCD_TO_BIN/BIN_TO_BCD
- use strlcpy instead of strncpy
- some whitespace cleanup
Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Thu, 23 Mar 2006 15:46:47 +0000 (16:46 +0100)]
[PATCH] hwmon: Add sysfs interface for individual alarm files
Extend the sysfs interface of hardware monitoring chips, by adding
individual alarm and beep files. Contrary to the old aggregated "alarms"
and "beeps" files, individual files constitute a standard way to access
the status information, making it finally possible to implement a
chip-independant hardware monitoring chip access library (once all
drivers have been added this new interface, that is.)
If future drivers need more individual files, the interface will be
extended as needed at the same time these drivers are merged into the
kernel tree.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rudolf Marek [Thu, 23 Mar 2006 15:25:22 +0000 (16:25 +0100)]
[PATCH] w83627ehf: Add voltage inputs support
Add the voltage measuring support to W83627EHF. The code is based
on the patch provided by Yuan Mu from Winbond.
Signed-off-by: Yuan Mu <Ymu@winbond.com.tw> Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Thu, 22 Jun 2006 01:10:19 +0000 (18:10 -0700)]
Merge git://oss.sgi.com:8090/xfs-2.6
* git://oss.sgi.com:8090/xfs-2.6: (43 commits)
[XFS] Remove files from the build that are now unused.
[XFS] Fix a Makefile issue related to exports.o handling.
[XFS] Remove version 1 directory code. Never functioned on Linux, just
[XFS] Map EFSCORRUPTED to an actual error code, not just a made up one
[XFS] Kill direct access to ->count in valusema(); all we ever use it for
[XFS] Remove unneeded conditional code on NFS export interface related
[XFS] Remove an incorrect use of unlikely() on a relatively likely code
[XFS] Push some common code out of write path into core XFS code for
[XFS] Remove unnecessary local from open_exec dmapi path.
[XFS] Minor XFS documentation updates.
[XFS] Fix broken const use inside local suffix_strtoul routine.
[XFS] Fix nused counter. It's currently getting set to -1 rather than
[XFS] Fix mismerge of the fs_writable cleanup patch causing a freeze/thaw
[XFS] Fix up debug code so that bulkstat wont generate thousands of
[XFS] Remove unused parameter from di2xflags routine.
[XFS] Cleanup a missed porting conversion, and freezing.
[XFS] Resolve a namespace collision on remaining vtypes for FreeBSD
[XFS] Resolve a namespace collision on vnode/vnodeops for FreeBSD porters.
[XFS] Resolve a namespace collision on vfs/vfsops for FreeBSD porters.
[XFS] statvfs component of directory/project quota support, code
...
This will allow for us to give endpoints a major/minor to create a
"usbfs2-like" way to access endpoints directly from userspace in an
easier manner than the current usbfs provides us.
Some usbserial functions returns -EINVAL if the port doesn't exist or if
it's not opened. However, the right error code for such situations is
-ENODEV.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Milan Svoboda [Mon, 29 May 2006 10:34:00 +0000 (03:34 -0700)]
[PATCH] usb gadget: update pxa2xx_udc.c driver to fully support IXP4xx platform
This patch adds IXP465 into the list of known devices and
adds IXP425 and IXP465 to the list of devices that have cfr. This
is not described in the hardware documentation, but without
it driver won't work.
Workaround (#if 1) that seemed to get rid of lost
status irqs is disabled for IXP4XX as it caused freezes
during testing of control messages. No lost irqs are
visible on IXP4XX.
Driver survived tests running over night without any
visible problems.
Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Franck Bui-Huu [Wed, 14 Jun 2006 08:29:21 +0000 (10:29 +0200)]
[PATCH] USB: gadget-serial: fix a deadlock when closing the serial device
When closing the device, the driver acquires/release twice the
port lock before/after waiting for the data to be completely
sent. Therefore it will dead lock.
This patch fixes it and also uses the generic scheduler services
for waiting for an event.
Frank Gevaerts [Wed, 14 Jun 2006 13:52:05 +0000 (15:52 +0200)]
[PATCH] USB Serial: clean tty fields on failed device open
If either the driver's open() method or try_module_get() fails, we need to
set 'tty->driver_data' and 'port->tty' to NULL in serial_open(), otherwise
we'll get an OOPS in usb_device_disconnect() when the device is disconnected.
Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Acked-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Bock [Fri, 9 Jun 2006 22:42:19 +0000 (00:42 +0200)]
[PATCH] USB: new driver for Cypress CY7C63xxx mirco controllers
This is a new driver for the Cypress CY7C63xxx mirco controller series.
It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus
GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I
ported to kernel 2.6 using sysfs. I intend to support more controllers
of this family (and more features) as soon as I get hold of the required
IDs etc. Please see the source code's header for more information.
Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Sat, 10 Jun 2006 03:10:10 +0000 (20:10 -0700)]
[PATCH] USB: update usbmon, fix glued lines
This update contains one bug fix: some lines can come out truncated,
because of the safety cutoff. This happened because I forgot to update
the size when status packets began to be printed.
The rest is:
- Comments updates
- Allow snooping with pkmap on x86_64, which is cache-coherent
- Enlarge event buffers (certainly we can have a couple of pages)
- Add event counter
First touch upon usbmon for 2.6.18.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Wed, 7 Jun 2006 01:18:33 +0000 (18:18 -0700)]
[PATCH] USB: io_edgeport touch-up
Al Borchers suggested to do this in his review of my previous patch.
I guess that I skipped this initially because of my visceral dislike
of sizeof(data). But in this case it seems well localized.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 5 Jun 2006 16:28:57 +0000 (12:28 -0400)]
[PATCH] UHCI: Improve FSBR-off timing
This patch (as707) improves the FSBR operation in uhci-hcd by turning it
off more quickly when it isn't needed. FSBR puts a noticeable load on a
computer's PCI bus, so it should be disabled as soon as possible when it
isn't in use. The patch leaves it running for only 10 ms after the last
URB stops using it, on the theory that this should be long enough for a
driver to submit another URB if it wants keep FSBR going.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 5 Jun 2006 16:21:30 +0000 (12:21 -0400)]
[PATCH] UHCI: remove hc_inaccessible flag
This patch (as706) removes the private hc_inaccessible flag from
uhci-hcd. It's not needed because it conveys exactly the same
information as the generic HCD_FLAG_HW_ACCESSIBLE bit.
In its place goes a new flag recording whether the controller is dead.
The new code allows a complete device reset to resurrect a dead
controller (although usbcore doesn't yet implement such a facility).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 6 Jun 2006 19:19:17 +0000 (15:19 -0400)]
[PATCH] usb-storage: unusual_devs entry for Nikon DSC D70s
This patch (as704) adds an unusual_devs entry for the Nikon DSC D70s,
which uses a different Product ID from the D70. It also moves the entry
for the DSC E2000 up in the list, to preserve the numerical ordering.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Chris Lund [Sat, 3 Jun 2006 20:58:19 +0000 (13:58 -0700)]
[PATCH] USB: free allocated memory on io_edgeport startup memory failure
While an Edgeport is allocating individual port structures, if kmalloc
returns NULL, the serial structure is freed and -ENOMEM, but the ports
allocated before the failure are not freed. This patch addresses that
condition.
Signed-off-by: Christopher Lund <docmax@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch extends the "option" driver with a few more devices, some of
which are actually connected to USB the "right" way -- as opposed to
doing it via PCMCIA and OHCI.
Alan Stern [Thu, 1 Jun 2006 17:59:16 +0000 (13:59 -0400)]
[PATCH] usbcore: recovery from Set-Configuration failure
This patch (as703) improves the error handling when a Set-Configuration
request fails. The old interfaces are all unregistered before the
request is sent, and if the request fails then we don't know what config
the device is using. So it makes no sense to leave actconfig pointing
to the old configuration with its invalid interfaces.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 1 Jun 2006 17:55:28 +0000 (13:55 -0400)]
[PATCH] usbhid: use usb_reset_composite_device
This patch (as702) makes usbhid use the new usb_reset_composite_device
API. Now HID interfaces can coexist with other interfaces on the same
device, and a reset can safely be requested by any of the drivers.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 1 Jun 2006 17:52:56 +0000 (13:52 -0400)]
[PATCH] usb-storage: use usb_reset_composite_device
This patch (as701) modifies usb-storage to take advantage of the new
usb_reset_composite_device() API. Now we will be able to safely request
port resets even if other drivers are bound to a mass-storage device.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 1 Jun 2006 17:37:24 +0000 (13:37 -0400)]
[PATCH] USB hub: use usb_reset_composite_device
This patch (as700) modifies the hub driver to take advantage of the new
usb_reset_composite_device API. The existing code had special-case
calls stuck into usb_reset_device, just before and after the reset.
With the new version there's no need for special-case stuff; it all
happens naturally in the form of pre_reset and post_reset notifications.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 1 Jun 2006 17:33:42 +0000 (13:33 -0400)]
[PATCH] usbcore: port reset for composite devices
This patch (as699) adds usb_reset_composite_device(), a routine for
sending a USB port reset to a device with multiple interfaces owned by
different drivers. Drivers are notified about impending and completed
resets through two new methods in the usb_driver structure.
The patch modifieds the usbfs ioctl code to make it use the new routine
instead of usb_reset_device(). Follow-up patches will modify the hub,
usb-storage, and usbhid drivers so they can utilize this new API.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Earlier work splitting the "usbnet" driver out into a core plus driver
modules was missing a blacklist entry for the Olympus R-1000; it must
not use the CDC Ethernet driver, only the "zaurus" support works with
it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Sesterhenn [Fri, 2 Jun 2006 03:48:45 +0000 (20:48 -0700)]
[PATCH] USB: negative index in drivers/usb/host/isp116x-hcd.c
From: Eric Sesterhenn <snakebyte@gmx.de>
This fixes coverity Bug #390.
With the following code
ret = ep->branch = balance(isp116x, ep->period, ep->load);
if (ret < 0)
goto fail;
the problem is that ret and balance are of the type int, and ep->branch is u16.
so the int balance() returns gets reduced to u16 and then converted to an int again,
which removes the sign. Maybe the following little c program can explain it better:
akpm@osdl.org [Fri, 26 May 2006 20:17:09 +0000 (13:17 -0700)]
[PATCH] Driver for Apple Cinema Display
This is a driver to control the brightness of an Apple Cinema Display over
USB. It updates the local brightness value if the user presses a button on
the display.
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Oliver Neukum <oliver@neukum.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Tue, 30 May 2006 11:36:30 +0000 (12:36 +0100)]
[PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1
This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB
product to the ftdi_sio driver's device ID table. The PID was supplied
by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list. The
PID 0xE050 matches the Windows INF files for this device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 30 May 2006 14:21:14 +0000 (10:21 -0400)]
[PATCH] usbhid: Remove unneeded blacklist entries
Now that usbhid automatically applies HID_QUIRK_NOGET to keyboards and
mice, we no longer need the blacklist entries that were present for no
other purpose. This patch (as698) removes them.
Daniel Drake [Fri, 26 May 2006 20:36:28 +0000 (21:36 +0100)]
[PATCH] USB: print message when device is rejected due to insufficient power
2.6.16 introduces USB power budgeting in the Linux kernel, and since then, a
fair number of users have observed that some of their devices no longer work in
unpowered hubs (this is not a bug, the devices claim that they need more than
100mA).
The very least we can do is print an informational message to the kernel log
when this happens, otherwise it is not at all clear why the device was not
accepted.
Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Fri, 26 May 2006 03:08:50 +0000 (20:08 -0700)]
[PATCH] ub: random cleanups
Remove some silly messages and cast in stone "temporary" messages which
we keep around. Also, I am hesitant to remove the initialization retries
without having the hardware to test (anyone who was at KS04 has a spare?)
Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Fri, 26 May 2006 03:04:54 +0000 (20:04 -0700)]
[PATCH] ub: atomic add_disk
<zaitcev> I am taling about this: "if (disk->flags & GENHD_FL_UP) del_gendisk(disk);"
<zaitcev> If del_gendisk() undoes add_disk() like viro just said, why is it conditional?
<viro> huh?
<viro> add_disk() sets the damn flag
<zaitcev> So, I should not need to check ever
<viro> so the above is "if I've called add_disk(), call gendisk()"
<viro> which might be what you want, of course
<viro> but usually you know if you'd done add_disk() on that puppy anyway
In ub, nobody upstream should ever see half-constructed disks before
they were passed to add_disk. To that end, only add the struct lun to
the list on the path of no return. With that fix in place, we do
not need to test GENHD_FL_UP.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Streetman [Wed, 24 May 2006 16:39:16 +0000 (09:39 -0700)]
[PATCH] improved TT scheduling for EHCI
This updates the EHCI driver by adding an improved scheduler for the
transaction translators, found in USB 2.0 hubs and used for low and
full speed devices.
- adds periodic_tt_usecs() and some helper functions, which does
the same thing that "periodic_usecs" does, except on the other
side of the TT, i.e. it calculates the low/fullspeed bandwidth
usage instead of highspeed.
- adds a tt_available() function which is the new implementation
of what tt_no_collision() does ... while tt_no_collision() ensures
that each TT handles only 1 periodic transfer at a time (a very
pessimistic approach) this version instead tracks bandwidth and
allows each TT to handle as many transfers as will fit on each TT's
downstream bus (closer to best-case).
The new scheduler is selected by a config option, marked as EXPERIMENTAL
so it can be tested (and more broadly reviewed) for a while until it
seems safe to remove the original scheduler.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Tue, 23 May 2006 05:02:32 +0000 (22:02 -0700)]
[PATCH] USB: Improve Kconfig comment for mct_u232
Add a couple of supported devices into the help message.
It's a long story... I promised this comment changed to a user long ago,
so I'd like to have that promise kept. In reality though, nobody is
likely to read this anyway.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 22 May 2006 20:47:13 +0000 (16:47 -0400)]
[PATCH] usbtest: report errors in iso tests
This patch (as693b) makes the usbtest driver report errors in the
isochronous bulk transfer tests instead of always returning 0. As an
arbitrary cutoff, an error is returned if more than 10% of the packet
transfers fail. It also stops a test immediately upon receiving an URB
submission error.
For a test harness, it's especially important to report when errors occur!
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vitja Makarov [Tue, 30 May 2006 20:40:06 +0000 (00:40 +0400)]
[PATCH] USB: new cp2101 device
By the way I have to ask you to add new (vid,pid) pair to cp2101 driver.
This device is argussoft's avr in-system programmer AS3M,
http://atmel.argussoft.ru/hard.htm
it's based on cp2101 chip and works pretty well with the linux driver.
It could be used with argussoft's `asisp1109.exe'
(http://atmel.argussoft.ru/download/software/as-tools.soft/asisp.zip)
tool run under wine.
Franck Bui-Huu [Mon, 15 May 2006 17:23:53 +0000 (19:23 +0200)]
[PATCH] Fix a deadlock in usbtest
ctrl_complete functions acquires ctx->lock and tries to unlink
all queued urbs in case of errors through usb_unlink_urb func.
In its turn usb_unlink_urb calls, through the hcd driver,
usb_hcd_giveback_urb which calls ctrl_complete again. At this
time, ctx->lock is already taken by the same function.
Alan Stern [Fri, 19 May 2006 20:52:35 +0000 (16:52 -0400)]
[PATCH] UHCI: remove ISO TDs as they are used
This patch (as690) does the same thing for ISO TDs as as680 did for
non-ISO TDs: free them as they are used rather than all at once when an
URB is complete. At the same time it fixes a minor buglet (I'm not
aware of it ever affecting anyone): An ISO TD should be retired when its
frame is over, regardless of whether or not the hardware has marked it
inactive.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 19 May 2006 20:44:55 +0000 (16:44 -0400)]
[PATCH] UHCI: store the period in the queue header
This patch (as689) stores the period for periodic transfers (interrupt
and ISO) in the queue header. This is necessary for proper bandwidth
tracking (not yet implemented). It also makes the scheduling of ISO
transfers a bit more rigorous, with checks for out-of-bounds frame
numbers.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 19 May 2006 20:39:52 +0000 (16:39 -0400)]
[PATCH] UHCI: fix race in ISO dequeuing
This patch (as688) fixes a small race in uhci-hcd. Because ISO queues
aren't controlled by queue headers, they can't be unlinked. Only
individual URBs can. So whenever multiple ISO URBs are dequeued, it's
necessary to make sure the hardware is done with each one. We can't
assume that dequeuing the first URB will suffice to unlink the entire
queue.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 19 May 2006 20:34:57 +0000 (16:34 -0400)]
[PATCH] UHCI: use integer-sized frame numbers
This patch (as687) changes uhci-hcd to keep track of frame numbers as
full-sized integers rather than 11-bit values. This makes them a lot
easier to handle and makes it possible to schedule beyond a 2-second
window, should anyone ever want to do so.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-2.6 / log