Uli Luckas [Wed, 22 Feb 2006 21:12:07 +0000 (21:12 +0000)]
[ARM] 3345/1: Fix interday RTC alarms
Patch from Uli Luckas
This is a bugfix.
The comment in arch/arm/common/rtctime.c explains it:
* FIXME: for now, we just copy the alarm time because we're lazy (and
* is therefore buggy - setting a 10am alarm at 8pm will not result in
* the alarm triggering.)
This patch adds one day to the alarm iff the alarm wrapped beyond midnight and therefore appears to be in the past.
Signed-off-by: Uli Luckas <u.luckas@road-gmbh.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Alessandro Zummo [Wed, 22 Feb 2006 21:12:06 +0000 (21:12 +0000)]
[ARM] 3344/1: NSLU2: beeper support
Patch from Alessandro Zummo
This patch adds support for the beeper
embedded in the NSLU2 to the machine setup code.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The I2C pin assignment for the Iomega NAS100d board was incorrect. This
patch fixes it. The correct assignment has now been tested using the
new RTC class and a new driver for the RTC on the NAS100d.
Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Alessandro Zummo [Wed, 22 Feb 2006 21:12:05 +0000 (21:12 +0000)]
[ARM] 3342/1: NSLU2: Protect power button init routine with machine_is_nslu2()
Patch from Alessandro Zummo
The power button exit routine for the Linksys NSLU2 was not protected by
a machine_is_nslu2(). This patch fixes it.
Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Wed, 22 Feb 2006 19:51:38 +0000 (19:51 +0000)]
[ARM] 3340/1: Fix the PCI setup for direct master access to SDRAM
Patch from Catalin Marinas
The initial code did not configure the inbound memory windows for direct
master access to the SDRAM. This patch creates a 1:1 mapping between the
Versatile/PB PCI memory windows and its SDRAM. Note that an updated FPGA
image is needed for Versatile/PB since the original windows were 1MB and
not able to cover the whole SDRAM (now extended to 256MB). The patch also
fixes the PCI IRQ mapping for slot #2.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 19 Feb 2006 19:53:56 +0000 (19:53 +0000)]
[ARM] Add panic-on-oops support
Although you could ask the kernel for panic-on-oops, it remained
non-functional because the architecture specific code fragment had
not been implemented. Add it, so it works as advertised.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hugh Dickins [Tue, 21 Feb 2006 23:49:47 +0000 (23:49 +0000)]
[PATCH] tmpfs: fix mount mpol nodelist parsing
I've been dissatisfied with the mpol_nodelist mount option which was
added to tmpfs earlier in -rc. Replace it by mpol=policy:nodelist.
And it was broken: a nodelist is a comma-separated list of numbers and
ranges; the mount options are a comma-separated list of token=values.
Whoops, blindly strsep'ing on commas doesn't work so well: since we've
no numeric tokens, and unlikely to add them, use that to distinguish.
Move the mpol= parsing to shmem_parse_mpol under CONFIG_NUMA, reject
all its options as invalid if not NUMA. /proc shows MPOL_PREFERRED
as "prefer", so use that name for the policy instead of "preferred".
Enforce that mpol=default has no nodelist; that mpol=prefer has one
node only; that mpol=bind has a nodelist; but let mpol=interleave use
node_online_map if no nodelist given. Describe this in tmpfs.txt.
Rojhalat Ibrahim [Mon, 20 Feb 2006 13:35:27 +0000 (13:35 +0000)]
[MIPS] Add topology_init.
A recent patch introduced cpu topology in sysfs. When you run a kernel
with SMP and sysfs enabled, you now get an Oops on boot. The following
patch fixes that by adding topology_init to arch/mips/kernel/smp.c. The
code is copied from arch/s390/kernel/smp.c.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Martin Michlmayr [Mon, 20 Feb 2006 04:57:00 +0000 (04:57 +0000)]
[MIPS] Fix compiler warnings in arch/mips/sibyte/bcm1480/irq.c
Fix the following compiler warnings:
CC arch/mips/sibyte/bcm1480/irq.o
arch/mips/sibyte/bcm1480/irq.c: In function ‘bcm1480_set_affinity’:
arch/mips/sibyte/bcm1480/irq.c:168: warning: ISO C90 forbids mixed declarations and code
arch/mips/sibyte/bcm1480/irq.c: In function ‘ack_bcm1480_irq’:
arch/mips/sibyte/bcm1480/irq.c:230: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Martin Michlmayr [Sat, 18 Feb 2006 14:55:45 +0000 (14:55 +0000)]
[MIPS] Add support for TIF_RESTORE_SIGMASK for signal32
Following the recent implementation of TIF_RESTORE_SIGMASK in
arch/mips/kernel/signal.c, 64-bit kernels with 32-bit user-land
compatibility oops when starting init. signal32.c needs to be
converted to use TIF_RESTORE_SIGMASK too.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 14 Feb 2006 06:57:50 +0000 (15:57 +0900)]
[MIPS] Fixes for uaccess.h with gcc >= 4.0.1
It seems current get_user() incorrectly sign-extend an unsigned int
value on 64bit kernel. I think this is because '(__typeof__(val))'
cast in final assignment. I suppose the cast should be
'(__typeof__(*(addr))'.
Björn Steinbrink [Sat, 18 Feb 2006 17:12:43 +0000 (18:12 +0100)]
[PATCH] kjournald keeps reference to namespace
In daemonize() a new thread gets cleaned up and 'merged' with init_task.
The current fs_struct is handled there, but not the current namespace.
This adds the namespace part.
[ Eric Biederman pointed out the namespace wrappers, and also notes that
we can't ever count on using our parents namespace because we already
have called exit_fs(), which is the only way to the namespace from a
process. ]
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Acked-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hirokazu Takata [Tue, 21 Feb 2006 02:28:17 +0000 (18:28 -0800)]
[PATCH] m32r: update sys_tas() routine
This patch updates and fixes sys_tas() routine for m32r.
In the previous implementation, a lockup rarely caused at sys_tas()
routine in SMP environment.
> > The problem is that touching *addr will generate an oops if that page isn't
> > paged in. If we convert it to use get_user() then that's an improvement,
> > but we must not run get_user() under spinlock or local_irq_disable().
I rewrote sys_tas() routine by using "lock -> unlock" instructions, and
utilizing the m32r's interrupt handling characteristics; the m32r processor
can accept interrupts only at the 32-bit instruction boundary. So, the
"unlock" instruction can be executed continuously after the "lock"
instruction execution without any interruptions.
In addition, to solve such a page_fault problem, I use a fixup code like
get_user().
And, as for the kernel lockup problem, we found that a calling
do_page_fault() routine with disabling interrupts might cause a lockup at
flush_tlb_others(), because we checked a completion of IPI handler's
operations in a spin-locked critical section.
Therefore, by using "lock -> unlock" code, we can implement the sys_tas()
rouitine without disabling interrupts explicitly, then no lockups would
happen at flush_tlb_others(), I hope.
Compile check and some working test in SMP environment have done.
When using the dasd diag discipline, the base discipline module (eckd or fba)
can be unloaded, even though the dasd driver requires both discipline modules
(base and diag) to work correctly.
Implement reference counting for both base and diag discipline modules in
order to fix this.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Frank Pavlic [Tue, 21 Feb 2006 02:28:12 +0000 (18:28 -0800)]
[PATCH] s390: V=V qdio fixes
Using FCP devices with V=V support, the input queue stalled when CCQ 97 had
been returned in qdio_do_eqbs. When this happen we have to reissue the eqbs
instruction.
Another bug was when V=V was enabled we checked if hardware has SIGA-sync
support. If not we returned with 0 from tiqdio_is_inbound_q_done. Thus qdio
lost initiative on FCP devices and input queue stalled. Running devices in
V=V there is no SIGA-sync support but nevertheless we have to process
tiqdio_is_inbound_q_done either.
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] radeonfb: resume support for Samsung P35 laptops
Make resume from suspend-to-ram possible for Samsung P35 laptops.
The radeon mobility 9700 chip on Samsung P35 laptops locks up everything on
resume from suspend-to-ram if it is not reinitialized.
VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
Class 0300: 1002:4e50
Subsystem: 144d:c00c
Unfortunately, the DMI strings are mostly identical for all Samsung
laptops. So we match the PCI ID and subsystem ID of the graphics card
which is unique for each Samsung laptop model.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Zhu Yi [Tue, 21 Feb 2006 02:28:09 +0000 (18:28 -0800)]
[PATCH] ipw2200: Suppress warning message
The following message will be only printed if DEBUG_NOTIF is on. "Unknown
notification: subtype=40,flags=0xa0,size=40"
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stephen Rothwell [Tue, 21 Feb 2006 02:28:08 +0000 (18:28 -0800)]
[PATCH] Fix compile for CONFIG_SYSVIPC=n or CONFIG_SYSCTL=n
The compat syscalls are added to sys_ni.c since they are not defined if the
above CONFIG options are off. Also, nfs would not build with CONFIG_SYSCTL
off.
Noticed by Arthur Othieno.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Luke Yang [Tue, 21 Feb 2006 02:28:07 +0000 (18:28 -0800)]
[PATCH] Fix undefined symbols for nommu architecture
Signed-off-by: Luke Yang <luke.adi@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] powermac: Fix loss of ethernet PHY on sleep
Some recent PowerBook models tend to lose the ethernet PHY on
suspend/resume. It -seems- that they use a combo ethernet-firewire PHY
chip and the firewire PHY seems to die the same way when that happens. Not
trying to toggle the firewire cable power appears to fix it. So this patch
disables changes to the firewire cable power control GPIO on those models.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] v9fs: update documentation and fix debug flag
Minor updates to the documentation to bring them into sync with current
websites and available features. The debug flag was switched back to hex
to match the documentation.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Peter Osterlund [Tue, 21 Feb 2006 02:28:01 +0000 (18:28 -0800)]
[PATCH] pktcdvd: Correctly set rq->cmd_len in pkt_generic_packet()
It looks like the code in pkt_generic_packet() worked by luck in the past, but
after commit 186d330e682210100c671355580a8592e4a21692 leaving rq->cmd_len
uninitialized doesn't work any more.
Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Fix snd-usb-audio in 32-bit compat environment
I'm getting oopses with snd-usb-audio in 32-bit compat environments:
control_compat.c:get_ctl_type() doesn't initialize 'info', so
'itemlist[uinfo->value.enumerated.item]' in
usbmixer.c:mixer_ctl_selector_info() might access random memory (The 'if
((int)uinfo->value.enumerated.item >= cval->max)' doesn't fix all problems
because of the unsigned -> signed conversion.)
Pavel Machek [Tue, 21 Feb 2006 02:27:58 +0000 (18:27 -0800)]
[PATCH] suspend-to-ram: allow video options to be set at runtime
Currently, acpi video options can only be set on kernel command line. That's
little inflexible; I'd like userland s2ram application that just works, and
modifying kernel command line according to whitelist is not fun. It is better
to just allow s2ram application to set video options just before suspend
(according to the whitelist).
This implements sysctl to allow setting suspend video options without reboot.
(akpm: Documentation updates for this new sysctl are pending..)
Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Tue, 21 Feb 2006 02:27:57 +0000 (18:27 -0800)]
[PATCH] x86_64: Don't set CONFIG_DEBUG_INFO in defconfig
Undo setting of CONFIG_DEBUG_INFO in the previous defconfig update. It
will make every build much slower and need more disk space and isn't a good
default.
Stephen Street [Tue, 21 Feb 2006 02:27:56 +0000 (18:27 -0800)]
[PATCH] spi: Fix modular master driver remove and device suspend/remove
Fix two problems in the spi subsystem:
1) spi subsystem core dumps when modular spi master is unloaded.
2) spi subsystem core dumps when spi slave device is suspended/resumed and
module slave driver is not loaded.
Signed-off-by: Stephen Street <stephen@streetfiresound.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Daniel Yeisley [Tue, 21 Feb 2006 02:27:54 +0000 (18:27 -0800)]
[PATCH] i386: need to pass virtual address to smp_read_mpc()
I'm seeing a kernel panic on an ES7000-600 when booting in virtual wire
mode. The panic happens because smp_read_mpc() is passed a physical
address, and it should be virtual. I tested the attached patch on the
ES7000-600 and on a 2 cpu Dell box, and saw no problems on either.
Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Terminate process that fails on a constrained allocation
Some allocations are restricted to a limited set of nodes (due to memory
policies or cpuset constraints). If the page allocator is not able to find
enough memory then that does not mean that overall system memory is low.
In particular going postal and more or less randomly shooting at processes
is not likely going to help the situation but may just lead to suicide (the
whole system coming down).
It is better to signal to the process that no memory exists given the
constraints that the process (or the configuration of the process) has
placed on the allocation behavior. The process may be killed but then the
sysadmin or developer can investigate the situation. The solution is
similar to what we do when running out of hugepages.
This patch adds a check before we kill processes. At that point
performance considerations do not matter much so we just scan the zonelist
and reconstruct a list of nodes. If the list of nodes does not contain all
online nodes then this is a constrained allocation and we should kill the
current process.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kurt Garloff [Tue, 21 Feb 2006 02:27:51 +0000 (18:27 -0800)]
[PATCH] OOM kill: children accounting
In the badness() calculation, there's currently this piece of code:
/*
* Processes which fork a lot of child processes are likely
* a good choice. We add the vmsize of the children if they
* have an own mm. This prevents forking servers to flood the
* machine with an endless amount of children
*/
list_for_each(tsk, &p->children) {
struct task_struct *chld;
chld = list_entry(tsk, struct task_struct, sibling);
if (chld->mm = p->mm && chld->mm)
points += chld->mm->total_vm;
}
The intention is clear: If some server (apache) keeps spawning new children
and we run OOM, we want to kill the father rather than picking a child.
This -- to some degree -- also helps a bit with getting fork bombs under
control, though I'd consider this a desirable side-effect rather than a
feature.
There's one problem with this: No matter how many or few children there are,
if just one of them misbehaves, and all others (including the father) do
everything right, we still always kill the whole family. This hits in real
life; whether it's javascript in konqueror resulting in kdeinit (and thus the
whole KDE session) being hit or just a classical server that spawns children.
Sidenote: The killer does kill all direct children as well, not only the
selected father, see oom_kill_process().
The idea in attached patch is that we do want to account the memory
consumption of the (direct) children to the father -- however not fully.
This maintains the property that fathers with too many children will still
very likely be picked, whereas a single misbehaving child has the chance to
be picked by the OOM killer.
In the patch I account only half (rounded up) of the children's vm_size to
the parent. This means that if one child eats more mem than the rest of
the family, it will be picked, otherwise it's still the father and thus the
whole family that gets selected.
This is heuristics -- we could debate whether accounting for a fourth would
be better than for half of it. Or -- if people would consider it worth the
trouble -- make it a sysctl. For now I sticked to accounting for half,
which should IMHO be a significant improvement.
The patch does one more thing: As users tend to be irritated by the choice
of killed processes (mainly because the children are killed first, despite
some of them having a very low OOM score), I added some more output: The
selected (father) process will be reported first and it's oom_score printed
to syslog.
Description:
Only account for half of children's vm size in oom score calculation
This should still give the parent enough point in case of fork bombs. If
any child however has more than 50% of the vm size of all children
together, it'll get a higher score and be elected.
This patch also makes the kernel display the oom_score.
Signed-off-by: Kurt Garloff <garloff@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tejun Heo [Mon, 20 Feb 2006 14:48:38 +0000 (23:48 +0900)]
[PATCH] libata: fix qc->n_elem == 0 case handling in ata_qc_next_sg
This patch makes ata_for_each_sg() start with pad_sgent when
qc->n_elem is zero. Previously, ata_for_each_sg() unconditionally
started with qc->__sg, handling the first sg to fill_sg() routines
even when the entry was invalid. And while at it, unwind ?: in
ata_qc_next_sg() into if statement.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Tejun Heo [Mon, 20 Feb 2006 14:48:37 +0000 (23:48 +0900)]
[PATCH] libata: fix WARN_ON() condition in *_fill_sg()
For ATAPI commands, padding can reduce qc->n_elem by one and thus to
zero making assert(qc->n_elem > 0)'s in ata_fill_sg() and qs_fill_sg()
fail for legal commands. This patch fixes the assert()'s to take
qc->pad_len into account.
Although the condition check seems a bit excessive, as this part of
code isn't still stable yet, I think it's worth to keep those.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Patrick McHardy [Mon, 20 Feb 2006 06:29:47 +0000 (22:29 -0800)]
[NETFILTER]: Fix outgoing redirects to loopback
When redirecting an outgoing packet to loopback, it keeps the original
conntrack reference and information from the outgoing path, which
falsely triggers the check for DNAT on input and the dst_entry is
released to trigger rerouting. ip_route_input refuses to route the
packet because it has a local source address and it is dropped.
Look at the packet itself to dermine if it was NATed. Also fix a
missing inversion that causes unneccesary xfrm lookups.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jean Tourrilhes [Mon, 20 Feb 2006 06:28:25 +0000 (22:28 -0800)]
[IRDA]: irda-usb bug fixes
This patch fixes 2 bugs in the USB-IrDA code.
The first one is a buffer overrun in the RX path. We are now using
IRDA_SKB_MAX_MTU when initializing the Rx URB.
The second one is a potential stack recursion when unplugging the USB
dongle. It seems that first we get the Rx URB with a generic error
code, and after a while the Rx URB comes again with a "disconnect"
error code. Since we are resubmitting the Rx URB immediately after
receiving the first error one, we might enter an endless loop.
When getting an error Rx URB, the patch defers the Rx URB resubmitting
so that it gives us a chance to catch the disconnect one, in case the
dongle has juts been unplugged.
Tested against 2.6.16-rc2.
Patch from Jean Tourrilhes
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 20 Feb 2006 06:26:40 +0000 (22:26 -0800)]
[NETFILTER]: Fix NAT PMTUD problems
ICMP errors are only SNATed when their source matches the source of the
connection they are related to, otherwise the source address is not
changed. This creates problems with ICMP frag. required messages
originating from a router behind the NAT, if private IPs are used the
packet has a good change of getting dropped on the path to its destination.
Always NAT ICMP errors similar to the original connection.
Based on report by Al Viro.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Ellerman [Thu, 16 Feb 2006 03:13:53 +0000 (14:13 +1100)]
[PATCH] powerpc: Fix bug in spinup of renumbered secondary threads
If the logical and physical cpu ids of a secondary thread don't match, we will
fail to spin the thread up on pSeries machines due to a bug in pseries/smp.c
We call the RTAS "start-cpu" method with the physical cpu id, the address of
pSeries_secondary_smp_init and the value to pass that function in r3. Currently
we pass "lcpu", the logical cpu id, but pSeries_secondary_smp_init expects
the physical cpu id in r3.
We should be passing pcpu instead.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 16 Feb 2006 03:13:51 +0000 (14:13 +1100)]
[PATCH] powerpc: Make UP -> SMP kexec work again
For UP to SMP kexec to work we need to jump into pSeries_secondary_smp_init
event on a UP + KEXEC kernel. The secondary cpus will not find their hw_cpu_id
in the paca and so they'll jump into kexec_wait, ready for a kexec.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 16 Feb 2006 03:13:50 +0000 (14:13 +1100)]
[PATCH] powerpc: Don't start secondary CPUs in a UP && KEXEC kernel
Because smp_release_cpus() is built for SMP || KEXEC, it's not safe to
unconditionally call it from setup_system(). On a UP && KEXEC kernel we'll
start up the secondary CPUs which will then go beserk and we die.
Simple fix is to conditionally call smp_release_cpus() in setup_system(). With
that in place we don't need the dummy definition of smp_release_cpus() because
all call sites are #ifdef'ed either SMP or KEXEC.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Olaf Hering [Sat, 11 Feb 2006 17:21:47 +0000 (18:21 +0100)]
[PATCH] powerpc: remove duplicate exports
A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/
WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux
Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sun, 19 Feb 2006 23:38:56 +0000 (10:38 +1100)]
powerpc: Keep xtime and gettimeofday in sync
This fixes a regression which was introduced by moving ppc32 to use
the same sort of lockless gettimeofday as ppc64 has been using for
some time. This involves getting the timebase and performing some
simple arithmetic to convert it to seconds and microseconds. However,
the factor and offset used there weren't being updated when NTP
varied the tick length using adjtimex. 64-bit didn't notice the
problem because it had a hook in the 32-bit adjtimex compat routine
that attempted to work out what the generic timekeeping code would
do and alter the factor and offset to match. However, that code
was very complex and it wasn't clear that it still matched what the
generic code would do.
Now we use the generic current_tick_length() routine that was recently
added to check that the current tick will be as long as we expect; if
not we recompute the factor and offset. This keeps gettimeofday and
xtime in sync. In addition we check that gettimeofday hasn't got ahead
of xtime on each timer interrupt; if it has, we resync.
Al Viro [Wed, 8 Feb 2006 19:37:40 +0000 (14:37 -0500)]
[PATCH] fix handling of st_nlink on procfs root
1) it should use nr_processes(), not nr_threads; otherwise we are getting
very confused find(1) and friends, among other things.
2) better do that at stat() time than at every damn lookup in procfs root.
Patch had been sitting in FC4 kernels for many months now...
Al Viro [Wed, 8 Feb 2006 19:09:00 +0000 (14:09 -0500)]
[PATCH] don't mangle INQUIRY if cmddt or evpd bits are set
sbp2.c mangles INQUIRY response in a way that only applies to standard
inquiry data (i.e. when both cmddt and evpd bits are 0). Leave other cases
alone; e.g. when asking for VPD the length of reply is in byte 3, not 4
and byte 4 is the first byte of device serial number.
Al Viro [Sat, 18 Feb 2006 20:41:50 +0000 (15:41 -0500)]
[PATCH] GFP_KERNEL allocations in atomic (auditsc)
audit_log_exit() is called from atomic contexts and gets explicit
gfp_mask argument; it should use it for all allocations rather
than doing some with gfp_mask and some with GFP_KERNEL.
acpi_rs_get_list_length() needs to account for all the vendor-defined data
bytes. Failing to include these causes buffers to be sized too small,
which causes slab corruption when we later convert AML to resources and run
off the end of the buffer.
This causes slab corruption on machines that use ACPI vendor-defined
resources. All HP ia64 machines do, and I'm told that some NEC machines
may as well.
David Gibson [Fri, 17 Feb 2006 21:52:56 +0000 (13:52 -0800)]
[PATCH] powerpc: Fix accidentally-working typo in __pud_free_tlb
One of the parameters to the __pud_free_tlb() macro for powerpc is
incorrect (see patch) . We get away with it by accident, because the one
place the macro is called, the second parameter is a variable named "pud".
Signed-off-by: David Gibson <dwg@au1.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Johannes Berg [Fri, 17 Feb 2006 21:52:54 +0000 (13:52 -0800)]
[PATCH] allow windfarm_pm112 module to load
The windfarm_pm112 module relies on smu_sat_get_sdb_partition which is in
windfarm_smu_sat.c but is not exported to modules, so despite Kconfig
having the option to build the pm112 as modules, this can never be loaded.
This patch fixes that by exporting smu_sat_get_sdb_partition with
EXPORT_SYMBOL_GPL
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Restore the compatibility with the older code and make it possible to
suspend if the kernel command line doesn't contain the "resume=" argument
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Heiko Carstens [Fri, 17 Feb 2006 21:52:48 +0000 (13:52 -0800)]
[PATCH] s390: smp initialization speed
The last changes that introduced the additional_cpus command line parameter
also introduced a regression regarding smp initialization speed. In
smp_setup_cpu_possible_map() cpu_present_map is set to the same value as
cpu_possible_map. Especially that means that bits in the present map will be
set for cpus that are not present. This will cause a slow down in the initial
cpu_up() loop in smp_init() since trying to take cpus online that aren't
present takes a while.
Fix this by setting only bits for present cpus in cpu_present_map and set
cpu_present_map to cpu_possible_map in smp_cpus_done().
Heiko Carstens [Fri, 17 Feb 2006 21:52:47 +0000 (13:52 -0800)]
[PATCH] s390: possible_cpus parameter
Introduce possible_cpus command line option. Hard sets the number of bits set
in cpu_possible_map. Unlike the additional_cpus parameter this one guarantees
that num_possible_cpus() will stay constant even if the system gets rebooted
and a different number of cpus are present at startup.
Heiko Carstens [Fri, 17 Feb 2006 21:52:46 +0000 (13:52 -0800)]
[PATCH] s390: additional_cpus parameter
Introduce additional_cpus command line option. By default no additional cpu
can be attached to the system anymore. Only the cpus present at IPL time can
be switched on/off. If it is desired that additional cpus can be attached to
the system the maximum number of additional cpus needs to be specified with
this option.
This change is necessary in order to limit the waste of per_cpu data
structures.
projects / linux-2.6 / log