[PATCH] device-mapper multipath: Avoid possible suspension deadlock
To avoid deadlock when suspending a multipath device after all its paths have
failed, stop queueing any I/O that is about to fail *before* calling
freeze_bdev instead of after.
Instead of setting a multipath 'suspended' flag which would have to be reset
if an error occurs during the process, save the previous queueing state and
leave userspace to restore if it wishes.
Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Corrected all cards marked as 7135 cards to 7133.
- Add new card support for Compro VideoMate TV Gold+II.
- Add new card support for Kworld Xpert TV PVR7134
- Add new card support for Typhoon DVB-T Cardbus.
- Changes to comply with CodingStyle: // comments converted to /* */
- Remove irq2_mask field from saa7134_dev structure.
- Collect all the bits needed in saa7134_hwinit2() instead.
- Distinguish the different variants of the Medion MD7134 modules via eeprom
- moved Philips FMD1216 radio specific setup to saa7134-core.c
- Fix kernel compile error with CONFIG_MODULES=n
- Cleanup tuner private calls.
- Some Indent fixes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hannibal <hannibal@megapolis.pl> Signed-off-by: Elshin Roman <roxmail@list.ru> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de> Signed-off-by: Juergen Orschiedt <jorschiedt@web.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Fixed a trouble on tuner-core that generates erros on computers with more
than one TV card.
- Rename tuner structures fields.
- Tail spaces removed.
- I2C cleanups and converged to a basic reference structure.
- Removed unused structures.
- Fix setting frequency on tda8290.
- Added code for TEA5767 autodetection.
- Standby mode support implemented. It is used to disable
a non used tuner. Currenlty implemented on tea5767.
- New macro: set_type disables other tuner when changing mode.
- Some cleanups.
- Use 50 kHz step when tunning radio for most tuners to improve precision.
Signed-off-by: Fabien Perrot <perrot1983@yahoo.fr> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Add new Typhoon DVB-T Cardbus.
- DVB-T support for MD7134 cardbus and the PCI variants
- initial DVB-T support for Lifeview Flydvb-t duo
- DVB-T support for Philips TOUGH reference design
- Don't turn off the xtal output of tda8274/75 in sleep mode
- Let Kconfig decide whether to include frontend-specific code in saa7134-dvb.
- Removed unused structures.
- Removed unused structures.
- Removed BTTV version check.
- Some debug structs moved to their own .c file and converted to static
- Comment changed to express better when attach_inform is running
- set_freq removed from set_mode at tuner-core.c.
- I2C cleanups and converged to a basic reference structure.
- Rename tuner structures fields.
- It calls VIDIOC_G_FREQUENCY to get tuner freq from tuner.
- added missing contrast offset value, set to 0.
- Let Kconfig decide whether to include frontend-specific code.
Signed-Off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Michael Krufky [Tue, 12 Jul 2005 20:58:37 +0000 (13:58 -0700)]
[PATCH] dvb: LGDT3302 QAM256 initialization fix
- Initialize all non mutually exclusive variables
without regard to the mode selected.
- Do a software reset each time the parameters are
set, regardless of whether anything changes.
This may allow an application to recover from a
hung condition.
- Improved error reporting.
- Removed $Id:$
Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Tue, 12 Jul 2005 20:58:31 +0000 (13:58 -0700)]
[PATCH] tlb.h warning fix
free_pages_and_swap_cache() and free_page_and_swap_cache() use release_pages()
and page_cache_release() respectively, so make sure that we have the
declarations in scope.
Cc: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Brian King [Tue, 12 Jul 2005 20:58:30 +0000 (13:58 -0700)]
[PATCH] cdev: cdev_put oops
While fixing an oops in the st driver in a dirty release path, I
encountered an oops in cdev_put for cdevs allocated using cdev_alloc. If
cdev_del is called when the cdev kobject still has an open user, when the
last cdev_put is called, the cdev_put will call kobject_put, which will end
up ultimately releasing the cdev in cdev_dynamic_release. Patch fixes the
oops by preventing cdev_put from accessing freed memory.
Signed-off-by: Brian King <brking@us.ibm.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland McGrath [Tue, 12 Jul 2005 20:58:27 +0000 (13:58 -0700)]
[PATCH] reset real_timer target on exec leader change
When a noninitial thread does exec, it becomes the new group leader. If
there is a ITIMER_REAL timer running, it points at the old group leader and
when it fires it can follow a stale pointer. The timer data needs to be
reset to point at the exec'ing thread that is becoming the group leader.
This has to synchronize with any concurrent firing of the timer to make
sure that it_real_fn can never run when the data points to a thread that
might have been reaped already.
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Chris Zankel [Tue, 12 Jul 2005 20:58:25 +0000 (13:58 -0700)]
[PATCH] xtensa: remove old syscalls
This patch fixes some minor bugs introduced by the previous patch (remove
old syscalls). Both patches remove the obsolete syscalls. The changes in
this patch were suggested by Arnd Bergmann. The vmlinux.lds.S changes are
required for the latest gcc/binutils.
Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Benjamin LaHaise [Tue, 12 Jul 2005 20:58:22 +0000 (13:58 -0700)]
[PATCH] uml: tlb flushing fix
This patch fixes a fairly serious tlb flushing bug that makes aio use under
uml very unreliable -- SEGVs, Oops and panic()s occur as a result of stale
tlb entires being used by uml when aio switches mms due to the fact that
uml does not implement the activate_mm() hook. This patch introduces a
simple but correct approach (read: hammer) for implementing activate_mm()
in uml by doing a force_flush_all() if the new mm is different from old.
With this patch in place, uml is able to succeed at the aio test case that
was randomly faulting for me before.
Cc: Jeff Dike <jdike@addtoit.com> Cc: <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
mm/filemap_xip.c: In function `__xip_unmap':
mm/filemap_xip.c:194: request for member `pte' in something not a structure or union
Apparently pte_pfn() takes a pte_t, not a pointer to a pte_t. From looking
at asm/page.h, it seems to be the same on ia32 or ppc (iff
STRICT_MM_TYPECHECKS is enabled, which is disabled by default on ppc).
The current CardBus window allocation code in yenta_socket is unable to handle
the transparent PCI-bridge handling update in 2.6.13. We need to check _all_
resources of a given type to find the best one suitable for CardBus windows,
not just the first one.
If the CardBus windows were pre-configured and the CardBus bridge is behind a
transparent PCI-PCI bridge, pci_find_parent_resource() might return a
different resource than the real parent if it is called before the window is
determined. Therefore, move that call around.
Andrew Morton [Tue, 12 Jul 2005 20:58:13 +0000 (13:58 -0700)]
[PATCH] x86_64: section alignment fix
This is the second time this has happened: inserting a new section requires
that we adjust the arithmetic which is used to calculate the vsyscall page's
offset.
Cc: Christoph Lameter <christoph@lameter.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] bugfix: two read_inode() calls without clear_inode() call between
Bug symptoms
~~~~~~~~~~~~
For the same inode VFS calls read_inode() twice and doesn't call
clear_inode() between the two read_inode() invocations.
Bug description
~~~~~~~~~~~~~~~
Suppose we have an inode which has zero reference count but is still in
the inode cache. Suppose kswapd invokes shrink_icache_memory() to free
some RAM. In prune_icache() inodes are removed from i_hash. prune_icache
() is then going to call clear_inode(), but drops the inode_lock
spinlock before this. If in this moment another task calls iget() for an
inode which was just removed from i_hash by prune_icache(), then iget()
invokes read_inode() for this inode, because it is *already removed*
from i_hash.
The end result is: we call iget(#N) then iput(#N); inode #N has zero
i_count now and is in the inode cache; kswapd starts. kswapd removes the
inode #N from i_hash ans is preempted; we call iget(#N) again;
read_inode() is invoked as the result; but we expect clear_inode()
before.
Fix
~~~~~~~
To fix the bug I remove inodes from i_hash later, when clear_inode() is
actually called. I remove them from i_hash under spinlock protection.
Since the i_state is set to I_FREEING, it is safe to do this. The others
will sleep waiting for the inode state change.
I also postpone removing inodes from i_sb_list. It is not compulsory to
do so but I do it for readability reasons. Inodes are added/removed to
the lists together everywhere in the code and there is no point to
change this rule. This is harmless because the only user of i_sb_list
which somehow may interfere with me (invalidate_list()) is excluded by
the iprune_sem mutex.
The same race is possible in invalidate_list() so I do the same for it.
Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes queer behavior in __wait_on_freeing_inode().
If I_LOCK was not set it called yield(), effectively busy waiting for the
removal of the inode from the hash. This change was introduced within
"[PATCH] eliminate inode waitqueue hashtable" Changeset 1.1938.166.16 last
october by wli.
The solution is to restore the old behavior, of unconditionally waiting on
the waitqueue. It doesn't matter if I_LOCK is not set initally, the task
will go to sleep, and wake up when wake_up_inode() is called from
generic_delete_inode() after removing the inode from the hash chain.
Comment is also updated to better reflect current behavior.
This condition is very hard to trigger normally (simultaneous clear_inode()
with iget()) so probably only heavy stress testing can reveal any change of
behavior.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[VLAN]: Fix early vlan adding leads to not functional device
OK, I can see what's happening here. eth0 doesn't detect link-up until
after a few seconds, so when the vlan interface is opened immediately
after eth0 has been opened, it inherits the link-down state. Subsequently
the vlan interface is never properly activated and are thus unable to
transmit any packets.
dev->state bits are not supposed to be manipulated directly. Something
similar is probably needed for the netif_device_present() bit, although
I don't know how this is meant to work for a virtual device.
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Hund [Mon, 27 Jun 2005 20:44:22 +0000 (22:44 +0200)]
[PATCH] USB: add ldusb driver
The following driver provides complete interrupt-in and interrupt-out
reports (raw data) to a user program. Until now it uses the
HIDIOCGDEVINFO ioctl call, because I don't know better :-(. Perhaps, it
will be ok for you - and I will be happy, if you assign 8 minor numbers.
I have tested it in several environments and it works very well for me.
However, it has a problem with two or more devices at the same hub, if
the two or more devices need 1 ms interrupt-in transfers. Unfortunately
more than one interrupt-in transfer every ms isn't possible (ehci
driver?). This is why the min_interrupt_in_interval and
min_interrupt_out_interval are increased to 2 ms (see the corresponding
module parameters). This way, I can use two devices simultaneously at
the same hub.
Signed-off-by: Michael Hund <mhund@ld-didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
brian@murphy.dk [Wed, 29 Jun 2005 23:53:29 +0000 (16:53 -0700)]
[PATCH] USB: fix usb reference count bug in cdc-acm driver
This increases the reference count on the usb cdc acm control interface
which is referred to by the tty interface provided by the driver. This
allows the deferred removal of the tty after the physical device is
disconnected if the tty is held open at the time of disconnection.
This adds another CDC descriptor type to <linux/usb_cdc.h>; the main claim
to fame for this is that some Motorola phones include it. It's not currently
needed by any driver code; included for completeness.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch re-organizing some parts of root hub initialization deleted the
code initializing the bus-neutral reboot/shutdown notifier for OHCI.
This patch just restores that deleted code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The recent "pm_message_t" changes removed functionality from the Linux
PM framework. This patch removes it from the OMAP OHCI too, removing
the distinction between (previous) PM_SUSPEND_MEM and PM_SUSPEND_DISK
state transitions ... now the only suspend semantics supportable are
what was previously PM_SUSPEND_DISK (4) and is now "PMSG_SUSPEND" (3).
This defect was found automatically by Coverity Prevent, a static analysis
tool.
(akpm: this code should be shot. Field `bitmap' doesn't exist in struct
usb_hub_descriptor. And this .c file is #included in
drivers/usb/host/ohci-hcd.c, and someone somewhere #defines `bitmap' to
`DeviceRemovable'.
>From a maintainability POV it would be better to memset the whole array
beforehand - I changed the patch to do that)
Michael Downey [Mon, 27 Jun 2005 17:48:26 +0000 (11:48 -0600)]
[PATCH] USB: add driver for Keyspan Digital Remote
This driver is a basic keypress input driver for the Keyspan Digital
Remote with part number UIA-11. Currently there is an older remote with
part number UIA-10 which isn't supported by this driver. Support for
the older UIA-10 could be added but a binary file is required to be
download to the device, and I don't have that file. I also don't have a
UIA-10 device so I wouldn't be able to test any of the changes.
Signed-off-by: Michael Downey <downey@zymeta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Mon, 27 Jun 2005 00:18:46 +0000 (17:18 -0700)]
[PATCH] USB: net2280 warning fix
drivers/usb/gadget/net2280.c: In function 'show_registers':
drivers/usb/gadget/net2280.c:1501: warning: assignment discards qualifiers from pointer target type
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Olav Kongas [Thu, 23 Jun 2005 17:25:36 +0000 (20:25 +0300)]
[PATCH] USB: Fix kmalloc's flags type in USB
Greg,
This patch fixes the kmalloc() flags argument type in USB
subsystem; hopefully all of its occurences. The patch was
made against patch-2.6.12-git2 from Jun 20.
Cleanup of flags for kmalloc() in USB subsystem.
Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Olav Kongas [Thu, 23 Jun 2005 17:12:24 +0000 (20:12 +0300)]
[PATCH] USB: isp116x-hcd cleanup
Sorry that it took so long. Here comes a cleanup patch that
addresses the remarks by Alexey Dobriyan about
gregkh-usb-usb-isp116x-hcd-add.patch EXCEPT the remark about
the typecasting of mem_flags argument for kcalloc; this will
be addressed in a later patch.
OlavCleanup of isp116x-hcd.
Signed off by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Sat, 25 Jun 2005 21:32:59 +0000 (14:32 -0700)]
[PATCH] USB: Patch to make usbmon to print control setup packets
Make usbmon to print Setup packets of Control transfers. This is useful
when debugging enumeration issues.
This is a change to the trace format which is not fully compatible.
A parser has to look at the data length word now. If that word is
a character like 's', read setup packet before proceeding with data.
I decided not to bump the API tag for this because not many such
parsers exist at this point.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Duncan Sands [Thu, 23 Jun 2005 07:37:56 +0000 (09:37 +0200)]
[PATCH] USB ATM: fix line resync logic
We map states 0x00 and 0x10 to the ATM_PHY_SIG_LOST flag. The current logic fails to
resync the line if we get state 0x10 followed by 0x00, since we only resync the line
when the state is 0x00 and the flag changed. Doubly fixed by (1) always resyncing the
line when the state is 0x00 even if the state didn't change, and (2) keeping track of
the last state, not just the flag. We do (2) as well as (1) in order to get better log
messages.
This is a tweaked version of the original patch by Aurelio Arroyo.
Ian Abbott [Mon, 20 Jun 2005 15:45:42 +0000 (16:45 +0100)]
[PATCH] USB ftdi_sio: reduce device id table clutter
ftdi_sio: Use a single usb_device_id table and detect the type of chip
programatically. The table also flags devices requiring special
initialization. The patch makes the driver about 10K smaller and makes
it easier to add new device IDs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sam Ravnborg [Tue, 12 Jul 2005 04:13:56 +0000 (21:13 -0700)]
[NET]: move config options out to individual protocols
Move the protocol specific config options out to the specific protocols.
With this change net/Kconfig now starts to become readable and serve as a
good basis for further re-structuring.
The menu structure is left almost intact, except that indention is
fixed in most cases. Most visible are the INET changes where several
"depends on INET" are replaced with a single ifdef INET / endif pair.
Several new files were created to accomplish this change - they are
small but serve the purpose that config options are now distributed
out where they belongs.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed three cases in the interpreter where an "index"
argument to an ASL function was still (internally) 32
bits instead of the required 64 bits. This was the Index
argument to the Index, Mid, and Match operators.
The "strupr" function is now permanently local
(acpi_ut_strupr), since this is not a POSIX-defined
function and not present in most kernel-level C
libraries. References to the C library strupr function
have been removed from the headers.
Completed the deployment of static
functions/prototypes. All prototypes with the static
attribute have been moved from the headers to the owning
C file.
An error is now generated if an attempt is made to create
a Buffer Field of length zero (A CreateField with a length
operand of zero.)
The interpreter now issues a warning whenever executable
code at the module level is detected during ACPI table
load. This will give some idea of the prevalence of this
type of code.
Implemented support for references to named objects (other
than control methods) within package objects.
Enhanced package object output for the debug
object. Package objects are now completely dumped, showing
all elements.
Enhanced miscellaneous object output for the debug
object. Any object can now be written to the debug object
(for example, a device object can be written, and the type
of the object will be displayed.)
The "static" qualifier has been added to all local
functions across the core subsystem.
The number of "long" lines (> 80 chars) within the source
has been significantly reduced, by about 1/3.
Cleaned up all header files to ensure that all CA/iASL
functions are prototyped (even static functions) and the
formatting is consistent.
Two new header files have been added, acopcode.h and
acnames.h.
Removed several obsolete functions that were no longer
used.
Sam Ravnborg [Tue, 12 Jul 2005 04:03:49 +0000 (21:03 -0700)]
[NET]: add a top-level Networking menu to *config
Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.
To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.
Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6 / log