Trond Myklebust [Tue, 6 Nov 2007 23:40:12 +0000 (18:40 -0500)]
SUNRPC: Make call_status()/call_decode() call xprt_force_disconnect()
Move the calls to xprt_disconnect() over to xprt_force_disconnect() in
order to enable the transport layer to manage the state of the
XPRT_CONNECTED flag.
Ditto in xs_tcp_read_fraghdr().
Trond Myklebust [Tue, 6 Nov 2007 23:28:53 +0000 (18:28 -0500)]
SUNRPC: xprt_autoclose() should not call xprt_disconnect()
The transport layer should do that itself whenever appropriate.
Note that the RDMA transport already assumes that it needs to call
xprt_disconnect in xprt_rdma_close().
For TCP sockets, we want to call xprt_disconnect() only after the
connection has been closed by both ends.
Trond Myklebust [Mon, 5 Nov 2007 20:44:12 +0000 (15:44 -0500)]
SUNRPC: Use shutdown() instead of close() when disconnecting a TCP socket
By using shutdown() rather than close() we allow the RPC client to wait
for the TCP close handshake to complete before we start trying to reconnect
using the same port.
We use shutdown(SHUT_WR) only instead of shutting down both directions,
however we wait until the server has closed the connection on its side.
Trond Myklebust [Mon, 5 Nov 2007 22:42:39 +0000 (17:42 -0500)]
SUNRPC: Allow the client to detect if the TCP connection is closed
Add an xprt->state bit to enable the TCP ->state_change() method to signal
whether or not the TCP connection is in the process of closing down.
This will to be used by the reconnection logic in a separate patch.
Trond Myklebust [Mon, 5 Nov 2007 22:40:58 +0000 (17:40 -0500)]
SUNRPC: Fix TCP rebinding logic
Currently the TCP rebinding logic assumes that if we're not using a
reserved port, then we don't need to reconnect on the same port if a
disconnection event occurs. This breaks most RPC duplicate reply cache
implementations.
Also take into account the fact that xprt_min_resvport and
xprt_max_resvport may change while we're reconnecting, since the user may
change them at any time via the sysctls. Ensure that we check the port
boundaries every time we loop in xs_bind4/xs_bind6. Also ensure that if the
boundaries change, we only scan the ports a maximum of 2 times.
Trond Myklebust [Tue, 8 Jan 2008 22:56:07 +0000 (17:56 -0500)]
NFSv4: Clean up the OPEN/CLOSE serialisation code
Reduce the time spent locking the rpc_sequence structure by queuing the
nfs_seqid only when we are ready to take the lock (when calling
nfs_wait_on_sequence).
Trond Myklebust [Tue, 29 Jan 2008 00:42:59 +0000 (19:42 -0500)]
NFS: Sillyrename: in the case of a race, check aliases are really positive
In nfs_do_call_unlink() we check that we haven't raced, and that lookup()
hasn't created an aliased dentry to our sillydeleted dentry. If somebody
has deleted the file on the server and the lookup() resulted in a negative
dentry, then ignore...
Trond Myklebust [Sat, 26 Jan 2008 22:37:47 +0000 (17:37 -0500)]
NFS: Fix a sillyrename race...
Ensure that readdir revalidates its data cache after blocking on
sillyrename.
Also fix a typo in nfs_do_call_unlink(): swap the ^= for an |=. The result
is the same, since we've already checked that the flag is unset, but it
makes the code more readable.
Linus Torvalds [Tue, 29 Jan 2008 22:54:54 +0000 (09:54 +1100)]
Mostly revert "e1000/e1000e: Move PCI-Express device IDs over to e1000e"
The new e1000e driver is apparently not yet suitable for general use, so
mark it experimental, and re-instate all the PCI-Express device IDs in
the old and stable e1000 driver so that people (namely me) can continue
to use a driver that actually works.
Auke & co have been appraised of the situation.
Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Tue, 29 Jan 2008 20:05:57 +0000 (21:05 +0100)]
splice: fix problem with atime not being updated
A bug report on nfsd that states that since it was switched to use
splice instead of sendfile, the atime was no longer being updated
on the input file. do_generic_mapping_read() does this when accessing
the file, make splice do it for the direct splice handler.
Jens Axboe [Tue, 29 Jan 2008 20:54:53 +0000 (21:54 +0100)]
xsysace: end request handling fix
In ace_fsm_dostate(), the variable 'i' was used only for passing
sector size of the request to end_that_request_first().
So I removed it and changed the code to pass the size in bytes
directly to __blk_end_request()
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25: (1470 commits)
[IPV6] ADDRLABEL: Fix double free on label deletion.
[PPP]: Sparse warning fixes.
[IPV4] fib_trie: remove unneeded NULL check
[IPV4] fib_trie: More whitespace cleanup.
[NET_SCHED]: Use nla_policy for attribute validation in ematches
[NET_SCHED]: Use nla_policy for attribute validation in actions
[NET_SCHED]: Use nla_policy for attribute validation in classifiers
[NET_SCHED]: Use nla_policy for attribute validation in packet schedulers
[NET_SCHED]: sch_api: introduce constant for rate table size
[NET_SCHED]: Use typeful attribute parsing helpers
[NET_SCHED]: Use typeful attribute construction helpers
[NET_SCHED]: Use NLA_PUT_STRING for string dumping
[NET_SCHED]: Use nla_nest_start/nla_nest_end
[NET_SCHED]: Propagate nla_parse return value
[NET_SCHED]: act_api: use PTR_ERR in tcf_action_init/tcf_action_get
[NET_SCHED]: act_api: use nlmsg_parse
[NET_SCHED]: act_api: fix netlink API conversion bug
[NET_SCHED]: sch_netem: use nla_parse_nested_compat
[NET_SCHED]: sch_atm: fix format string warning
[NETNS]: Add namespace for ICMP replying code.
...
Linus Torvalds [Tue, 29 Jan 2008 11:48:03 +0000 (22:48 +1100)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (68 commits)
[MIPS] remove Documentation/mips/GT64120.README
[MIPS] Malta: remaining bits of the board support code cleanup
[MIPS] Malta: make the helper function static
[MIPS] Malta: fix braces at single statement blocks
[MIPS] Malta, Atlas: move an extern function declaration to the header file
[MIPS] Malta: Use C89 style for comments
[MIPS] Malta: else should follow close brace in malta_int.c
[MIPS] Malta: remove a superfluous comment
[MIPS] Malta: include <linux/cpu.h> instead of <asm/cpu.h>
[MIPS] Malta, Atlas, Sead: remove an extern from .c files
[MIPS] Malta: fix oversized lines in malta_int.c
[MIPS] Malta: remove a dead function declaration
[MIPS] Malta: use tabs not spaces
[MIPS] Malta: set up the screen info in a separate function
[MIPS] Malta: check the PCI clock frequency in a separate function
[MIPS] Malta: use the KERN_ facility level in printk()
[MIPS] Malta: use Linux kernel style for structure initialization
[MIPS]: constify function pointer tables
[MIPS] compat: handle argument endianess of sys32_(f)truncate64 with merge_64
[MIPS] Cobalt 64-bits kernels can be safely unmarked experimental
...
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (79 commits)
Remove references to "make dep"
kconfig: document use of HAVE_*
Introduce new section reference annotations tags: __ref, __refdata, __refconst
kbuild: warn about ld added unique sections
kbuild: add verbose option to Section mismatch reporting in modpost
kconfig: tristate choices with mixed tristate and boolean values
asm-generic/vmlix.lds.h: simplify __mem{init,exit}* dependencies
remove __attribute_used__
kbuild: support ARCH=x86 in buildtar
kconfig: remove "enable"
kbuild: simplified warning report in modpost
kbuild: introduce a few helpers in modpost
kbuild: use simpler section mismatch warnings in modpost
kbuild: link vmlinux.o before kallsyms passes
kbuild: introduce new option to enhance section mismatch analysis
Use separate sections for __dev/__cpu/__mem code/data
compiler.h: introduce __section()
all archs: consolidate init and exit sections in vmlinux.lds.h
kbuild: check section names consistently in modpost
kbuild: introduce blacklisting in modpost
...
Linus Torvalds [Tue, 29 Jan 2008 11:45:39 +0000 (22:45 +1100)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
Module: check to see if we have a built in module with the same name
module: add module taint on ndiswrapper
module: fix the module name length in param_sysfs_builtin
module: make module_address_lookup safe
module: better OOPS and lockdep coverage for loading modules
module: Fix gratuitous sprintf in module.c
module: wait for dependent modules doing init.
module: Don't report discarded init pages as kernel text.
Linus Torvalds [Tue, 29 Jan 2008 11:43:38 +0000 (22:43 +1100)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
jbd2: sparse pointer use of zero as null
jbd2: Use round-jiffies() function for the "5 second" ext4/jbd2 wakeup
jbd2: Mark jbd2 slabs as SLAB_TEMPORARY
jbd2: add lockdep support
ext4: Use the ext4_ext_actual_len() helper function
ext4: fix uniniatilized extent splitting error
ext4: Check for return value from sb_set_blocksize
ext4: Add stripe= option to /proc/mounts
ext4: Enable the multiblock allocator by default
ext4: Add multi block allocator for ext4
ext4: Add new functions for searching extent tree
ext4: Add ext4_find_next_bit()
ext4: fix up EXT4FS_DEBUG builds
ext4: Fix ext4_show_options to show the correct mount options.
ext4: Add EXT4_IOC_MIGRATE ioctl
ext4: Add inode version support in ext4
vfs: Add 64 bit i_version support
ext4: Add the journal checksum feature
jbd2: jbd2 stats through procfs
ext4: Take read lock during overwrite case.
...
Dmitri Vorobiev [Thu, 24 Jan 2008 16:52:57 +0000 (19:52 +0300)]
[MIPS] remove Documentation/mips/GT64120.README
Based upon the 2.4 kernel, the information presented in the
Documentation/mips/GT64120.README file is outdated. Worse,
the document contents are plain misleading nowadays because
the text mentions files and directories, which have been
deleted, moved or restructured for 2.6.
This patch removes the documentation, which is no more valid.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dmitri Vorobiev [Thu, 24 Jan 2008 16:52:56 +0000 (19:52 +0300)]
[MIPS] Malta: remaining bits of the board support code cleanup
This patch factors out the code, which handles the Bonito system
controller. The case of not supporting the DMA coherency is handled
separately to make the logic obvious. Besides, a couple of empty
lines added to beautify the code even further.
No functional changes introduced.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dmitri Vorobiev [Thu, 24 Jan 2008 16:52:48 +0000 (19:52 +0300)]
[MIPS] Malta, Atlas, Sead: remove an extern from .c files
This patch moves the "extern" declaration for the function
mips_reboot_setup() from the board setup .c files to the
header file include/asm-mips/mips-boards/generic.h.
This fixes a warning produced by the checkpatch.pl script.
No functional changes introduced.
This was compile-tested by building the kernel for all
three boards affected by this change. All builds finished
successfully.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dmitri Vorobiev [Thu, 24 Jan 2008 16:52:46 +0000 (19:52 +0300)]
[MIPS] Malta: remove a dead function declaration
Neither is the mips_rtc_get_time() routine defined anywhere in
the MIPS architecture-specific code, nor does anyone call it any
more. This patch removes the extern declaration of this fossil.
This patch does not introduce any functional changes.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 29 Jan 2008 10:15:02 +0000 (10:15 +0000)]
[MIPS] Qemu: Remove platform.
The Qemu platform was originally implemented to have an easily supportable
platform until Qemu reaches a state where it emulates a real world system.
Since the latest release Qemu is capable of emulating the MIPSsim and
Malta platforms, so this goal has been reached. The Qemu plaform is also
rather underfeatured so less useful than a Malta emulation.
Ralf Baechle [Tue, 29 Jan 2008 10:15:00 +0000 (10:15 +0000)]
[MIPS] Altas, Malta: Switch boot file format to raw.
A raw binary boots about twice as fast as SREC.
The possibility to generate SREC binaries remains by simply using the
vmlinux.srec target but seems only useful for the probably hypothetical
case where one of these systems is booted over a serial interface.
Ralf Baechle [Tue, 29 Jan 2008 10:14:59 +0000 (10:14 +0000)]
[MIPS] Extend performance counter event field.
The latest draft version of the MIPS Architecture Specification extends the
6 bit event field by adding a directly adjacent 4-bit EventExt field for a
total of 10 bits.
- EISA support for non PCI RMs (RM200 and RM400-xxx). The major part
is the splitting of the EISA and onboard ISA of the RM200, which
makes the EISA bus on the RM200 look like on other RMs.
- 64bit kernel support
- system type detection is now common for big and little endian
- moved sniprom code to arch/mips/fw
- added call_o32 function to arch/mips/fw/lib, which uses a private
stack for calling prom functions
- fix problem with ISA interrupts, which makes using PIT clockevent
possible
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Manuel Lauss [Thu, 6 Dec 2007 08:07:55 +0000 (09:07 +0100)]
[MIPS] Alchemy: Au1210/Au1250 CPU support
This patch adds IDs for new Au1200 variants: Au1210 and Au1250.
They are essentially identical to the Au1200 except for the Au1210
which has a different SoC-ID in the PRId register [bits 31:24].
The Au1250 is a "Au1200 V0.2".
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 29 Jan 2008 10:14:59 +0000 (10:14 +0000)]
[MIPS] Eleminate local symbols from the symbol table.
These symbols appear in oprofile output, stacktraces and similar but only
make the output harder to read. Many identical symbol names such as
"both_aligned" were also being used in multiple source files making it
impossible to see which file actually was meant. So let's get rid of them.
Ralf Baechle [Tue, 29 Jan 2008 10:14:58 +0000 (10:14 +0000)]
[MIPS] Remove CONFIG_SIBYTE_PT{1120,1125,SWARM}
According to Broadcom the PT systems are production test systems which
never reached customers so no need to keep the fragmentary support we
currently have.
R10k non coherent machines need a real dma cache invalidate to get rid of
speculative stores in cache. For other machines this promises a slight
speedup.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Given that the corresponding source file i2c-yosemite.c file was
removed in commit daa4a68f901c4d6491baa1a01f5c869a553c3f6c, and that
no one else includes this file, it seems safe to delete it.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Andrew Sharp [Wed, 31 Oct 2007 21:11:24 +0000 (14:11 -0700)]
[MIPS] Put cast inside macro instead of all the callers
Since all the callers of the PHYS_TO_XKPHYS macro call with a constant,
put the cast to LL inside the macro where it really should be rather
than in all the callers. This makes macros like PHYS_TO_XKSEG_UNCACHED
work without gcc whining.
Signed-off-by: Andrew Sharp <andy.sharp@onstor.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This complements the generic R4000/R4400 errata workaround code and adds
bits for the daddiu problem. In most places it just modifies handwritten
assembly code so that the assembler is allowed to use a temporary register
as daddiu may now be treated as a macro that expands to a sequence of li
and daddu. It is the AT register or, where AT is unavailable or used
explicitly for another purpose, an explicitly-named register is selected,
using the .set at=<reg> feature added recently to gas. This feature is
only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the
workaround remains disabled, the required version of binutils stays
unchanged.
Similarly, daddiu instructions put in branch delay slots in noreorder
fragments are now taken out of them and the assembler is allowed to
reorder them itself as possible (which it does making the whole idea of
scheduling them into delay slots manually questionable).
Also in the very few places where such a simple conversion was not
possible, a handcoded longer sequence is implemented.
Other than that there are changes to code responsible for building the
TLB fault and page clear/copy handlers to avoid daddiu as appropriate.
These are only effective if the erratum is verified to be present at the
run time.
Finally there is a trivial update to __delay(), because it uses daddiu in
a branch delay slot.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This is the gereric part of R4000/R4400 errata workarounds. They include
compiler and assembler support as well as some source code modifications
to address the problems with some combinations of multiply/divide+shift
instructions as well as the daddi and daddiu instructions.
Changes included are as follows:
1. New Kconfig options to select workarounds by platforms as necessary.
2. Arch top-level Makefile to pass necessary options to the compiler; also
incompatible configurations are detected (-mno-sym32 unsupported as
horribly intrusive for little gain).
3. Bug detection updated and shuffled -- the multiply/divide+shift problem
is lethal enough that if not worked around it makes the kernel crash in
time_init() because of a division by zero; the daddiu erratum might
also trigger early potentially, though I have not observed it. On the
other hand the daddi detection code requires the exception subsystem to
have been initialised (and is there mainly for information).
4. r4k_daddiu_bug() added so that the existence of the erratum can be
queried by code at the run time as necessary; useful for generated code
like TLB fault and copy/clear page handlers.
5. __udelay() updated as it uses multiplication in inline assembly.
Note that -mdaddi requires modified toolchain (which has been maintained
by myself and available from my site for ~4years now -- versions covered
are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards). The -mfix-r4000
and -mfix-r4400 have been standard for a while though.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
projects / linux-2.6 / log