]> err.no Git - linux-2.6/log
linux-2.6
16 years agox86 vDSO: ia32 sysenter_return
Roland McGrath [Wed, 30 Jan 2008 12:30:43 +0000 (13:30 +0100)]
x86 vDSO: ia32 sysenter_return

This changes the 64-bit kernel's support for the 32-bit sysenter
instruction to use stored fields rather than constants for the
user-mode return address, as the 32-bit kernel does.  This adds a
sysenter_return field to struct thread_info, as 32-bit has.  There
is no observable effect from this yet.  It makes the assembly code
independent of the 32-bit vDSO mapping address, paving the way for
making the vDSO address vary as it does on the 32-bit kernel.

[ akpm@linux-foundation.org: build fix on !CONFIG_IA32_EMULATION ]

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: ia32_sysenter_target
Roland McGrath [Wed, 30 Jan 2008 12:30:43 +0000 (13:30 +0100)]
x86 vDSO: ia32_sysenter_target

This harmonizes the name for the entry point from the 32-bit sysenter
instruction across 32-bit and 64-bit kernels.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: vdso32 setup
Roland McGrath [Wed, 30 Jan 2008 12:30:42 +0000 (13:30 +0100)]
x86 vDSO: vdso32 setup

This moves arch/x86/kernel/sysenter_32.c to arch/x86/vdso/vdso32-setup.c,
keeping all the code relating only to vDSO magic in the vdso/ subdirectory.
This is a pure renaming, but it paves the way to consolidating the code for
dealing with 32-bit vDSOs across CONFIG_X86_32 and CONFIG_IA32_EMULATION.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: i386 vdso32 install
Roland McGrath [Wed, 30 Jan 2008 12:30:42 +0000 (13:30 +0100)]
x86 vDSO: i386 vdso32 install

This enables 'make vdso_install' for i386 as on x86_64 and powerpc.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: absolute relocs
Roland McGrath [Wed, 30 Jan 2008 12:30:42 +0000 (13:30 +0100)]
x86 vDSO: absolute relocs

This updates the exceptions for absolute relocs for the new symbol name
convention used for symbols extracted from the vDSO images.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: i386 vdso32
Roland McGrath [Wed, 30 Jan 2008 12:30:42 +0000 (13:30 +0100)]
x86 vDSO: i386 vdso32

This makes the i386 kernel use the new vDSO build in arch/x86/vdso/vdso32/
to replace the old one from arch/x86/kernel/.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: vdso32 build
Roland McGrath [Wed, 30 Jan 2008 12:30:42 +0000 (13:30 +0100)]
x86 vDSO: vdso32 build

This builds the 32-bit vDSO images in the arch/x86/vdso subdirectory.
Nothing uses the images yet, but this paves the way for consolidating
the vDSO build logic all in one place.  The new images use a linker
script sharing the layout parts from vdso-layout.lds.S with the 64-bit
vDSO.  A new vdso32-syms.lds is generated in the style of vdso-syms.lds.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: arch/x86/vdso/vdso32
Roland McGrath [Wed, 30 Jan 2008 12:30:42 +0000 (13:30 +0100)]
x86 vDSO: arch/x86/vdso/vdso32

This moves the i386 vDSO sources into arch/x86/vdso/vdso32/, a
new directory.  This patch is a pure renaming, but paves the way
for consolidating the vDSO build logic.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: harmonize asm-offsets
Roland McGrath [Wed, 30 Jan 2008 12:30:41 +0000 (13:30 +0100)]
x86 vDSO: harmonize asm-offsets

This change harmonizes the asm-offsets macros used in the 32-bit vDSO
across 32-bit and 64-bit builds.  It's a purely cosmetic change for now,
but it paves the way for consolidating the 32-bit vDSO builds.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: new layout
Roland McGrath [Wed, 30 Jan 2008 12:30:41 +0000 (13:30 +0100)]
x86 vDSO: new layout

This revamps the vDSO linker script to lay things out with the best
packing of the data and good, separate alignment of the code.  The
rigid layout using VDSO_TEXT_OFFSET no longer matters to the kernel.
I've moved the layout parts of the linker script into a new include
file, vdso-layout.lds.S; this is in preparation for sharing the script
for the 32-bit vDSO builds too.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: remove vdso-syms.o
Roland McGrath [Wed, 30 Jan 2008 12:30:41 +0000 (13:30 +0100)]
x86 vDSO: remove vdso-syms.o

Get rid of vdso-syms.o from the kernel link.  We don't need it any more.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: use vdso-syms.lds
Roland McGrath [Wed, 30 Jan 2008 12:30:41 +0000 (13:30 +0100)]
x86 vDSO: use vdso-syms.lds

This patch changes the kernel's references to addresses in the vDSO image
to be based on the symbols defined by vdso-syms.lds instead of the old
vdso-syms.o symbols.  This is all wrapped up in a macro defined by the new
asm-x86/vdso.h header; that's the only place in the kernel source that has
to know the details of the scheme for getting vDSO symbol values.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 vDSO: generate vdso-syms.lds
Roland McGrath [Wed, 30 Jan 2008 12:30:40 +0000 (13:30 +0100)]
x86 vDSO: generate vdso-syms.lds

This patch adds a new way of extracting symbols from the built vDSO image.
This is much simpler and less fragile than using ld -R; it removes the
need to control the DSO layout quite so exactly.  I was clearly unduly
distracted by clever ld uses when I did the original vDSO implementation.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: randomize brk
Jiri Kosina [Wed, 30 Jan 2008 12:30:40 +0000 (13:30 +0100)]
x86: randomize brk

Randomize the location of the heap (brk) for i386 and x86_64.  The range is
randomized in the range starting at current brk location up to 0x02000000
offset for both architectures.  This, together with
pie-executable-randomization.patch and
pie-executable-randomization-fix.patch, should make the address space
randomization on i386 and x86_64 complete.

Arjan says:

This is known to break older versions of some emacs variants, whose dumper
code assumed that the last variable declared in the program is equal to the
start of the dynamically allocated memory region.

(The dumper is the code where emacs effectively dumps core at the end of it's
compilation stage; this coredump is then loaded as the main program during
normal use)

iirc this was 5 years or so; we found this way back when I was at RH and we
first did the security stuff there (including this brk randomization).  It
wasn't all variants of emacs, and it got fixed as a result (I vaguely remember
that emacs already had code to deal with it for other archs/oses, just
ifdeffed wrongly).

It's a rare and wrong assumption as a general thing, just on x86 it mostly
happened to be true (but to be honest, it'll break too if gcc does
something fancy or if the linker does a non-standard order).  Still its
something we should at least document.

Note 2: afaik it only broke the emacs *build*.  I'm not 100% sure about that
(it IS 5 years ago) though.

[ akpm@linux-foundation.org: deuglification ]

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: extended interrupt LVT support for AMD Barcelona
Robert Richter [Wed, 30 Jan 2008 12:30:40 +0000 (13:30 +0100)]
x86: extended interrupt LVT support for AMD Barcelona

Also macro definitions in apicdef.h has been updated.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: untable __init references between IO data
Andi Kleen [Wed, 30 Jan 2008 12:30:40 +0000 (13:30 +0100)]
x86: untable __init references between IO data

Earlier patch added IO APIC setup into local APIC setup. This caused
modpost warnings. Fix them by untangling setup_local_APIC() and splitting
it into smaller functions. The IO APIC initialization is only called
for the BP init.

Also removed some outdated debugging code and minor cleanup.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: use core id bits for apicid_to_node initialization
Yinghai Lu [Wed, 30 Jan 2008 12:30:39 +0000 (13:30 +0100)]
x86: use core id bits for apicid_to_node initialization

We shoud use core id bits instead of max cores, in case later with AMD
downcores Quad core Opteron.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: store core id bits in cpuinfo_x8
Yinghai Lu [Wed, 30 Jan 2008 12:30:39 +0000 (13:30 +0100)]
x86: store core id bits in cpuinfo_x8

We need to store core id bits to cpuinfo_x86 in early_identify_cpu. So we
use it to create acpiid_to_node array in k8topolgy.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove -maccumulate-outgoing-args on 32-bit
Adrian Bunk [Wed, 30 Jan 2008 12:30:39 +0000 (13:30 +0100)]
x86: remove -maccumulate-outgoing-args on 32-bit

Contrary to the comment "newer gccs do it by default", newer gcc versions
default to -maccumulate-outgoing-args only with CONFIG_CC_OPTIMIZE_FOR_SIZE=n,
and then only with some CPU settings.

Measured with an i386 defconfig, gcc 4.2.1 and kernel 2.6.23-rc1 ("orig" is
the plain kernel, "changed is with -maccumulate-outgoing-args removed):

$ ls -la vmlinux*
-rwxrwxr-x 1 bunk bunk 6269713 2007-07-24 22:19 vmlinux.changed
-rwxrwxr-x 1 bunk bunk 6425361 2007-07-24 22:19 vmlinux.orig
$ size vmlinux.*
   text    data     bss     dec     hex filename
4493465  504108  614400 5611973  55a1c5 vmlinux.changed
4646160  504108  614400 5764668  57f63c vmlinux.orig
$

That's a 2.5% size increase that does for sure hurt small systems.

If the stack unwinder ever comes back and needs this as indicated in the
comment, adding it to the cflags when the user enabled the unwinder should be
a better option.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: clear IO_APIC before enabing apic error vector.
Yinghai Lu [Wed, 30 Jan 2008 12:30:39 +0000 (13:30 +0100)]
x86: clear IO_APIC before enabing apic error vector.

4 socket quad core, 8 socket quad core will do apic ID lifting for BSP.

But io-apic regs for ExtINT still use 0 as dest.

so when we enable apic error vector in BSP, we will get one APIC error.

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
enabled ExtINT on CPU#0
ESR value after enabling vector: 00000000, after 0000000c
APIC error on CPU0: 0c(08)
ENABLING IO-APIC IRQs
Synchronizing Arb IDs.

So move enable_IO_APIC from setup_IO_APIC into setup_local_APIC and call it
before enabling the ACPI error vector.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: cleanup kernel/setup_64.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:39 +0000 (13:30 +0100)]
x86: cleanup kernel/setup_64.c

Clean it up before applying more patches to it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: remove unused tsk_thread from asm-offsets_64.c
Steven Rostedt [Wed, 30 Jan 2008 12:30:39 +0000 (13:30 +0100)]
x86: remove unused tsk_thread from asm-offsets_64.c

So this patch simply removes the "thread" from asm-offsets.c since I
can't find an owner for it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: use CR0 defines.
Dave Jones [Wed, 30 Jan 2008 12:30:39 +0000 (13:30 +0100)]
x86: use CR0 defines.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge resume-trace.h variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:38 +0000 (13:30 +0100)]
x86: merge resume-trace.h variants

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge topology.h variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:38 +0000 (13:30 +0100)]
x86: merge topology.h variants

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: consolidate toloplogy_32/64.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:38 +0000 (13:30 +0100)]
x86: consolidate toloplogy_32/64.h

Reorder defines and do white space / coding style cleanups
to get a readable diff.

Also convert the macros to inline functions. Move the pci
related inlines to pci.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: adjust numa 32 namespace
Thomas Gleixner [Wed, 30 Jan 2008 12:30:38 +0000 (13:30 +0100)]
x86: adjust numa 32 namespace

Use the 64bit numa variable names for numa32 as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: fixup numa 64 namespace
Thomas Gleixner [Wed, 30 Jan 2008 12:30:38 +0000 (13:30 +0100)]
x86: fixup numa 64 namespace

Using a variable name, which is the same as a macro name is not
really smart. Change the variable names and fixup all users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: cleanup numa_64.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:37 +0000 (13:30 +0100)]
x86: cleanup numa_64.c

Clean it up before applying more patches.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge include/asm-x86/sparsemem.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:37 +0000 (13:30 +0100)]
x86: merge include/asm-x86/sparsemem.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge include/asm-x86/sparsemem.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:37 +0000 (13:30 +0100)]
x86: merge include/asm-x86/sparsemem.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: put all kern_addr_valid() incarnations to pgtable.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:37 +0000 (13:30 +0100)]
x86: put all kern_addr_valid() incarnations to pgtable.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge acpi_32/64.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:36 +0000 (13:30 +0100)]
x86: merge acpi_32/64.h

Merge the files.

[ mingo@elte.hu: build fix ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: cleanup acpi_32/64.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:36 +0000 (13:30 +0100)]
x86: cleanup acpi_32/64.h

Fix coding style to get a readable diff

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: cleanup smp.h variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:36 +0000 (13:30 +0100)]
x86: cleanup smp.h variants

Bring the smp.h variants into sync to prepare merging and
paravirt support.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: merge mpspec variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:35 +0000 (13:30 +0100)]
x86: merge mpspec variants

The delta is now minimal. Merge them

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: cleanup mpspec variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:35 +0000 (13:30 +0100)]
x86: cleanup mpspec variants

Bring the mpspec variants into sync to prepare merging and
paravirt support.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: merge tlbflush.h variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:35 +0000 (13:30 +0100)]
x86: merge tlbflush.h variants

The delta is now minimal. Merge them

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: cleanup tlbflush.h variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:35 +0000 (13:30 +0100)]
x86: cleanup tlbflush.h variants

Bring the tlbflush.h variants into sync to prepare merging and
paravirt support.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: merge spinlock.h variants
Thomas Gleixner [Wed, 30 Jan 2008 12:30:34 +0000 (13:30 +0100)]
x86: merge spinlock.h variants

Merge them finally together

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: spinlock_32/64 substitute types and instructions
Thomas Gleixner [Wed, 30 Jan 2008 12:30:34 +0000 (13:30 +0100)]
x86: spinlock_32/64 substitute types and instructions

Use _slock_t for the spinlock data types and replace the instructions
by string defines, which makes the code of 32/64 bit versions more
or less identical.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: spinlock_32/64 match the jump labels and symbols
Thomas Gleixner [Wed, 30 Jan 2008 12:30:34 +0000 (13:30 +0100)]
x86: spinlock_32/64 match the jump labels and symbols

Match the jump labels in  the 32/64 variants and switch the
64bit version to symbols, so the functions are almost identical
except for the operand size now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: use immediates instead of RW_LOCK_BIAS_STR
Thomas Gleixner [Wed, 30 Jan 2008 12:30:34 +0000 (13:30 +0100)]
x86: use immediates instead of RW_LOCK_BIAS_STR

Use immediate instead of the RW_LOCK_BIAS_STR.
Makes the code more readable and gets rid of the string constant.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: fix asm constraints in spinlock_32/64.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:34 +0000 (13:30 +0100)]
x86: fix asm constraints in spinlock_32/64.h

Use the correct constraints for the spinlock assembler functions.

read (modify) write functions need "+m" instead of "=m"

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: consolidate spinlock.h
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:30:33 +0000 (13:30 +0100)]
x86: consolidate spinlock.h

The cli and sti instructions need to be replaced by paravirt hooks.
For the i386 architecture, this is already done. The code requirements
aren't much different from x86_64 POV, so this part is consolidated in
the common header

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: irqflags consolidation
Glauber de Oliveira Costa [Wed, 30 Jan 2008 12:30:33 +0000 (13:30 +0100)]
x86: irqflags consolidation

This patch consolidates the irqflags include files containing common
paravirt definitions. The native definition for interrupt handling, halt,
and such, are the same for 32 and 64 bit, and they are kept in irqflags.h.
the differences are split in the arch-specific files.

The syscall function, irq_enable_sysexit, has a very specific i386 naming,
and its name is then changed to a more general one.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: clean up nmi_32/64.c
Hiroshi Shimamoto [Wed, 30 Jan 2008 12:30:33 +0000 (13:30 +0100)]
x86: clean up nmi_32/64.c

clean up and make nmi_32/64.c more similar.
- white space and coding style clean up.
- nmi_cpu_busy is available on CONFIG_SMP.
- move functions __acpi_nmi_enable, acpi_nmi_enable,
  __acpi_nmi_disable and acpi_nmi_disable.
- make variables name more similar.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: clean up stack allocation and free
clameter@sgi.com [Wed, 30 Jan 2008 12:30:32 +0000 (13:30 +0100)]
x86: clean up stack allocation and free

Clean up the allocation and freeing of stacks a bit by using a __GFP_ZERO flag
instead of memset.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: bitops_32.h style cleanups
Randy Dunlap [Wed, 30 Jan 2008 12:30:32 +0000 (13:30 +0100)]
x86: bitops_32.h style cleanups

Coding style cleanups in x86/bitops_32.h:

- drop space in "* addr"
- whitespace & indentation fixes
- spello fixes

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove extern declarations for code, data, bss resources
Bernhard Walle [Wed, 30 Jan 2008 12:30:32 +0000 (13:30 +0100)]
x86: remove extern declarations for code, data, bss resources

This patch removes the extern struct resource declarations for
data_resource, code_resource and bss_resource on x86 and declares that
three structures as static as done on other architectures like IA64.

On i386, these structures are moved to setup_32.c (from e820_32.c) because
that's code that is not specific to e820 and also required on EFI systems.
That makes the "extern" reference superfluous.

On x86_64, data_resource, code_resource and bss_resource are passed to
e820_reserve_resources() as arguments just as done on i386 and IA64.  That
also avoids the "extern" reference and it's possible to make it static.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove dead code in ia32-emu
Cyrill Gorcunov [Wed, 30 Jan 2008 12:30:32 +0000 (13:30 +0100)]
x86: remove dead code in ia32-emu

Remove useless second time checking of fsave argument in save_i387_ia32()
routine.  It's possible the compiler is doing the same but that is much
better to remove the dead code explicitly.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove duplicate includes
Lucas Woods [Wed, 30 Jan 2008 12:30:32 +0000 (13:30 +0100)]
x86: remove duplicate includes

Signed-off-by: Lucas Woods <woodzy@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: mtrr use type bool [RESEND AGAIN]
Paul Jimenez [Wed, 30 Jan 2008 12:30:31 +0000 (13:30 +0100)]
x86: mtrr use type bool [RESEND AGAIN]

This is a janitorish patch to 1) remove private TRUE/FALSE #def's in
favor of using the standard enum from linux/stddef.h and 2) switch the
variables holding those values to type 'bool' (from linux/types.h)
since it both seems more appropriate and allows for potentially better
optimization.

As a truly minor aside, I removed a couple of comments documenting
a 'do_safe' parameter that seems to no longer exist.

Signed-off-by: Paul Jimenez <pj@place.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: pci-dma_64.c: cleanups
Adrian Bunk [Wed, 30 Jan 2008 12:30:31 +0000 (13:30 +0100)]
x86: pci-dma_64.c: cleanups

This patch contains the following cleanups:
- make the needlessly global iommu_setup() static
- remove the unused EXPORT_SYMBOL(iommu_merge)

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: pci-calgary_64.c: make a variable static
Adrian Bunk [Wed, 30 Jan 2008 12:30:31 +0000 (13:30 +0100)]
x86: pci-calgary_64.c: make a variable static

"debugging" is a horrible name for a global variable - thankfully it can
become static.

Also put it out of __read_mostly so that gcc no longer has to emit it
at all.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: nmi_64.c: make code static
Adrian Bunk [Wed, 30 Jan 2008 12:30:31 +0000 (13:30 +0100)]
x86: nmi_64.c: make code static

This patch makes the following needlessly global code static:
- panic_on_timeout
- setup_nmi_watchdog()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 mce_64.c: make struct mcelog static
Adrian Bunk [Wed, 30 Jan 2008 12:30:30 +0000 (13:30 +0100)]
x86 mce_64.c: make struct mcelog static

This patch makes the needlessly global struct mcelog static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: io_apic_64.c: remove unused config check
Hiroshi Shimamoto [Wed, 30 Jan 2008 12:30:30 +0000 (13:30 +0100)]
x86: io_apic_64.c: remove unused config check

CONFIG_IRQBALANCE doesn't exist on x86_64.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 e820_64.c: make 2 functions static
Adrian Bunk [Wed, 30 Jan 2008 12:30:30 +0000 (13:30 +0100)]
x86 e820_64.c: make 2 functions static

This patch makes the following needlessly global functions static:
- e820_print_map()
- early_panic()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: actually merge <asm/alternative.h>
H. Peter Anvin [Wed, 30 Jan 2008 12:30:30 +0000 (13:30 +0100)]
x86: actually merge <asm/alternative.h>

This actually merges <asm-x86/alternative_{32,64}.h> into
<asm-x86/alternative.h>.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: prepare merger of <asm/alternative_{32,64}.h>
H. Peter Anvin [Wed, 30 Jan 2008 12:30:30 +0000 (13:30 +0100)]
x86: prepare merger of <asm/alternative_{32,64}.h>

Prepare for merging <asm/alternative_{32,64}.h> by making the 32- and
64-bit versions textually identical.  This involves:

- removing arbitrary header inclusion differences
- reorganizing the 32-bit version slightly to match the 64-bit version
- using <asm/asm.h> to unify the assembly code
- renaming struct paravirt_patch to struct paravirt_patch_site in the
  64-bit version to match the 32-bit version; there are no references
  to struct paravirt_patch elsewhere in the tree.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: make i8259_64 more _32-like
Paul Jimenez [Wed, 30 Jan 2008 12:30:29 +0000 (13:30 +0100)]
x86: make i8259_64 more _32-like

Howdy! Here's a simple janitorish patch for you:

This patch mainly hinges around two includes and their ramifications:

#include <i8259.h> which provides cached_{slave,master}_mask
#include <io_ports.h> which provides PIC_{MASTER,SLAVE}_{IMR,CMD}

Adding these two includes and using those half dozen or so definitions
removed 140+ lines of diffs between i8259_32.c and i8259_64.c, thus
making it easier for the real substantitive differences between them to
show up, and hopefully therefore making it easier to eventually merge
the two.  All the warnings that checkpatch.pl throws (missing spaces
after commas and >80 character lines) exist intentionally to match
i8259_32.c.

Signed-off-by: Paul Jimenez <pj@place.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: move 8259 defines to i8259.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:29 +0000 (13:30 +0100)]
x86: move 8259 defines to i8259.h

Move the i8259 defines and remove the now io_ports.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: unexport __{read,write}_lock_failed
Adrian Bunk [Wed, 30 Jan 2008 12:30:29 +0000 (13:30 +0100)]
x86: unexport __{read,write}_lock_failed

This patch removes the unused exports for __{read,write}_lock_failed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: remove more bogus filenames in comments.
Dave Jones [Wed, 30 Jan 2008 12:30:28 +0000 (13:30 +0100)]
x86: remove more bogus filenames in comments.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: nuke a ton of unused exports
Thomas Gleixner [Wed, 30 Jan 2008 12:30:28 +0000 (13:30 +0100)]
x86: nuke a ton of unused exports

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: remove dead code and exports
Thomas Gleixner [Wed, 30 Jan 2008 12:30:28 +0000 (13:30 +0100)]
x86: remove dead code and exports

No users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: nuke a ton of dead hpet code
Thomas Gleixner [Wed, 30 Jan 2008 12:30:27 +0000 (13:30 +0100)]
x86: nuke a ton of dead hpet code

No users, just ballast

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: smp_64.c: remove unused exports and cleanup while at it
Thomas Gleixner [Wed, 30 Jan 2008 12:30:27 +0000 (13:30 +0100)]
x86: smp_64.c: remove unused exports and cleanup while at it

The exports are nowhere used. There is even no reason why they were
ever introduced.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: clean up arch/x86/kernel/time_64.c includes
Thomas Gleixner [Wed, 30 Jan 2008 12:30:27 +0000 (13:30 +0100)]
x86: clean up arch/x86/kernel/time_64.c includes

Reduce the lets include all to the minimum.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: share rtc code
Thomas Gleixner [Wed, 30 Jan 2008 12:30:27 +0000 (13:30 +0100)]
x86: share rtc code

Remove the rtc code from time_64.c and add the extra bits to the
i386 path. The ACPI century check is probably valid for i386 as
well, but this is material for a separate patch.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: isolate the rtc code for sharing
Thomas Gleixner [Wed, 30 Jan 2008 12:30:26 +0000 (13:30 +0100)]
x86: isolate the rtc code for sharing

The mach-default/mach_time.h code inline is moved to arch/x86/kernel/rtc.c
and the header files are adjusted.

Shrink the 3 dozen includes to the ones we really need.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: unify mc146818rtc.h - prepare for sharing rtc code
Thomas Gleixner [Wed, 30 Jan 2008 12:30:26 +0000 (13:30 +0100)]
x86: unify mc146818rtc.h - prepare for sharing rtc code

Unify mc146818rtc.h by adding the rtc_cmos_read/write functions to
time_64.c. This is a preparatory patch to finaly share the rtc code,
which is unsurprisingly similar.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: remove the duplicated arch/x86/ia32/mmap32.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:26 +0000 (13:30 +0100)]
x86: remove the duplicated arch/x86/ia32/mmap32.c

Use mmap_32.c in arch/x86/mm instead

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: clean up arch/x86/mm/mmap_32/64.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:25 +0000 (13:30 +0100)]
x86: clean up arch/x86/mm/mmap_32/64.c

White space and coding style clenaup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: clean up arch/x86/kernel/vsmp_64.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:24 +0000 (13:30 +0100)]
x86: clean up arch/x86/kernel/vsmp_64.c

White space and coding style clenaup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: clean up ioport_32.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:24 +0000 (13:30 +0100)]
x86: clean up ioport_32.c

Remove unused variables, rename the "unused" argument to regp. It is used !
Codingstyle fixes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: simplify set_bitmap in ioport_32.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:23 +0000 (13:30 +0100)]
x86: simplify set_bitmap in ioport_32.c

Simplify set_bitmap(). This is not in a hotpath and we really can use the
straight forward loop through those bits. A similar implementation is used
in the 64 bit code as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge include/asm-x86/scatterlist.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:21 +0000 (13:30 +0100)]
x86: merge include/asm-x86/scatterlist.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge include/asm-x86/dma.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:20 +0000 (13:30 +0100)]
x86: merge include/asm-x86/dma.h

Almost identical.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: merge futex_32/64.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:20 +0000 (13:30 +0100)]
x86: merge futex_32/64.h

Finally merge them together.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: prepare merging futex_32/64.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:20 +0000 (13:30 +0100)]
x86: prepare merging futex_32/64.h

Replace .quad/.long with a define and use the same asm syntax
for i386 and x86.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: prepare merging arch/x86/kernel/apic_32/64.c
Thomas Gleixner [Wed, 30 Jan 2008 12:30:20 +0000 (13:30 +0100)]
x86: prepare merging arch/x86/kernel/apic_32/64.c

Shuffle code around, so we get a readable diff.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: make smp_local_timer_interrupt() static
Thomas Gleixner [Wed, 30 Jan 2008 12:30:20 +0000 (13:30 +0100)]
x86: make smp_local_timer_interrupt() static

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move ack_bad_irq into irq code
Thomas Gleixner [Wed, 30 Jan 2008 12:30:19 +0000 (13:30 +0100)]
x86: move ack_bad_irq into irq code

Match i386, where we have this in the irq code. It belongs there.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move ioapic code where it belongs
Thomas Gleixner [Wed, 30 Jan 2008 12:30:19 +0000 (13:30 +0100)]
x86: move ioapic code where it belongs

The commit 399287229c775a8962a852a761d65dc9475dec7c hacked the
ioapic resource mapping into apic.c for no good reason.
Move the code into io_apic_64.c where it belongs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: remove obsolte declarations from proto.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:19 +0000 (13:30 +0100)]
x86: remove obsolte declarations from proto.h

Nuke duplicate and obsolete crap from this ugly dump bin.
There are still some entries left which need to be sorted out,
but I'm tired of that puzzle game right now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: remove duplicate start_kernel declaration
Thomas Gleixner [Wed, 30 Jan 2008 12:30:19 +0000 (13:30 +0100)]
x86: remove duplicate start_kernel declaration

start_kernel is already declared in a generic header file.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: remove obsolete nohpet declaration
Thomas Gleixner [Wed, 30 Jan 2008 12:30:18 +0000 (13:30 +0100)]
x86: remove obsolete nohpet declaration

Lonely user is hpet.c, so no need to declare it elsewhere.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move pmtmr related declarations
Thomas Gleixner [Wed, 30 Jan 2008 12:30:18 +0000 (13:30 +0100)]
x86: move pmtmr related declarations

Move more stuff out of proto.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move tsc related declarations
Thomas Gleixner [Wed, 30 Jan 2008 12:30:18 +0000 (13:30 +0100)]
x86: move tsc related declarations

tsc has also it's own header file. Nuke the stupid 64 bit ifdef
while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move pda related declaration
Thomas Gleixner [Wed, 30 Jan 2008 12:30:18 +0000 (13:30 +0100)]
x86: move pda related declaration

pda has its own header file as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move page related declaration
Thomas Gleixner [Wed, 30 Jan 2008 12:30:17 +0000 (13:30 +0100)]
x86: move page related declaration

end_pfn is in page.h, so end_pfn_map has a place there as well

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move numa related declarations
Thomas Gleixner [Wed, 30 Jan 2008 12:30:17 +0000 (13:30 +0100)]
x86: move numa related declarations

More stuff shuffeled to the correct place

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move mce related declarations
Thomas Gleixner [Wed, 30 Jan 2008 12:30:17 +0000 (13:30 +0100)]
x86: move mce related declarations

Move the mce related declarations where they belong, fix the
users and remove 32bit dependency in mce.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move debug related declarations to kdebug.h
Thomas Gleixner [Wed, 30 Jan 2008 12:30:17 +0000 (13:30 +0100)]
x86: move debug related declarations to kdebug.h

Move them and fixup some users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move k8 related declarations
Thomas Gleixner [Wed, 30 Jan 2008 12:30:16 +0000 (13:30 +0100)]
x86: move k8 related declarations

Move k8 related declarations to k8.h and fix numa_64.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move idle related declarations
Thomas Gleixner [Wed, 30 Jan 2008 12:30:16 +0000 (13:30 +0100)]
x86: move idle related declarations

Move idle related declarations to processor_64.h, where the
the others are as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: make early_indentify_cpu static
Thomas Gleixner [Wed, 30 Jan 2008 12:30:16 +0000 (13:30 +0100)]
x86: make early_indentify_cpu static

early_indentify_cpu is only used in setup_64.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: move acpi and pci declarations
Thomas Gleixner [Wed, 30 Jan 2008 12:30:16 +0000 (13:30 +0100)]
x86: move acpi and pci declarations

Move acpi/pci related declarations to the correct headers
and remove the duplicate.

Build fix from: Andrew Morton

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>