[PATCH] ARM: 2784/1: Fix the block cache flush operation range
Patch from Catalin Marinas
The range for the ARMv6 block cache operations is inclusive but the
kernel doesn't re-calculate the end address, causing a page fault when
used (this only happens with support for cache aliasing, otherwise the
blk_flush_kern_dcache_page() is not called). This patch subtracts
L1_CACHE_BYTES from the end address.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Sun, 3 Jul 2005 16:44:40 +0000 (17:44 +0100)]
[PATCH] ARM: 2785/1: S3C24XX - serial calls request_irq() with IRQs disabled
Patch from Ben Dooks
The request_irq() function is called by s3c24xx uart driver with
the local IRQs disabled. The request_irq() function can allocate
memory via kmalloc(), and this may sleep causing a warning about
sleeping in an invalid context.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Rob Punkunus [Sun, 3 Jul 2005 15:37:18 +0000 (17:37 +0200)]
[PATCH] amd74xx: support MCP55 device IDs
From: Rob Punkunus <rpunkunus@nvidia.com>
Rob Punkunus recently submitted a patch to enable support for MCP51/MCP55 in
the amd74xx driver. This patch was whitespace-corrupted and didn't apply to
2.6.12 since MCP51 support was merged in the 2.6.12-rc series.
Gentoo would like to support this hardware for our upcoming release media, so
I fixed the patch, and here it is :)
Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Hannes Reinecke [Tue, 28 Jun 2005 12:57:10 +0000 (14:57 +0200)]
[PATCH] PCI: Remove newline from pci MODALIAS variable
the pci core sends out a hotplug event variable MODALIAS with a trailing
newline. This is inconsistent with all other event variables and breaks
some hotplug tools. This patch removes the said newline.
The dynamic pci id logic has been bothering me for a while, and now that
I started to look into how to move some of this to the driver core, I
thought it was time to clean it all up.
It ends up making the code smaller, and easier to follow, and fixes a
few bugs at the same time (dynamic ids were not being matched
everywhere, and so could be missed on some call paths for new devices,
semaphore not needed to be grabbed when adding a new id and calling the
driver core, etc.)
I also renamed the function pci_match_device() to pci_match_id() as
that's what it really does.
Ivan Kokshaysky [Wed, 15 Jun 2005 14:59:27 +0000 (18:59 +0400)]
[PATCH] PCI: pci_assign_unassigned_resources() on x86
- Add sanity check for io[port,mem]_resource in setup-bus.c. These
resources look like "free" as they have no parents, but obviously
we must not touch them.
- In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be
allocated for some reason, then clear its flags. This prevents any child
allocations in this range, so the setup-bus code will work with a clean
resource sub-tree.
- i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks
only resources 0-5, which looks like a clear bug to me. I suspect it
might break hotplug as well in some cases.
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With the number of PCI bus resources increased to 8, we can
handle the subtractive decode PCI-PCI bridge like a normal
bridge, taking into account standard PCI-PCI bridge windows
(resources 0-2). This helps to avoid problems with peer-to-peer DMA
behind such bridges, poor performance for MMIO ranges outside bridge
windows and prefetchable vs. non-prefetchable memory issues.
To reflect the fact that such bridges do forward all addresses to
the secondary bus (transparency), remaining bus resources 3-7 are
linked to resources 0-4 of the primary bus. These resources will be
used as fallback by resource management code if allocation from
standard bridge windows fails for some reason.
[PATCH] PCI: Increase the number of PCI bus resources
This patch increases the number of resource pointers in the
pci_bus structure. This is needed to store >4 resource ranges
for host bridges and transparent PCI bridges. With this change,
all PCI buses will have more resource pointers, but most PCI
buses will only use the first 3 or 4, the remaining being NULL.
The PCI core already deals with this correctly.
Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ivan Kokshaysky [Fri, 1 Jul 2005 12:46:26 +0000 (16:46 +0400)]
[PATCH] alpha smp fix (part #2)
This fixes the bug that caused BUG_ON(!irqs_disabled()) to trigger in
run_posix_cpu_timers() on alpha/smp. We didn't disable interrupts
properly before calling smp_percpu_timer_interrupt().
We *do* disable interrupts everywhere except this unfortunate
smp_percpu_timer_interrupt(). Fixed thus.
[PATCH] ARM: replace schedule_timeout() with msleep()
Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. Neither signals nor wait-queue events are
important at this point in the code, I believe.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Fri, 1 Jul 2005 10:27:06 +0000 (11:27 +0100)]
[PATCH] ARM: 2783/1: Remove omnimeter_defconfig as there is no kernel support
Patch from Ben Dooks
The omnimeter_defconfig does not define any machines and
seems to have no other support in the current kernel.
This patch removes the config file, as this is the only
thing currently mentioning the ominmeter.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add support for PXA27x Standby mode, a low-power mode that retains CPU
and some peripheral state (the existing "sleep" mode is a power-power
mode that retains less state). Activated via:
echo -n standby > /sys/power/state
From: David Burrage and Todd Poynor
Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ivan Kokshaysky [Thu, 30 Jun 2005 16:02:18 +0000 (20:02 +0400)]
[PATCH] alpha smp fix
As usual, the reason of this breakage is quite silly: in do_entIF, we
are checking for PS == 0 to see whether it was a kernel BUG() or
userspace trap.
It works, unless BUG() happens in interrupt - PS is not 0 in kernel mode
due to non-zero IPL, and the things get messed up horribly then. In
this particular case it was BUG_ON(!irqs_disabled()) triggered in
run_posix_cpu_timers(), so we ended up shooting "current" with the
bursts of one SIGTRAP and three SIGILLs on every timer tick. ;-)
This patch calculates the AFS partition length by expanding the image
length information to the nearest erase block boundary. This
eliminates the problems with JFFS2 erasing the footer.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 30 Jun 2005 21:41:22 +0000 (22:41 +0100)]
[PATCH] Serial: Fix small CONFIG_SERIAL_8250_NR_UARTS
If CONFIG_SERIAL_8250_NR_UARTS is smaller than the array size in
asm/serial.h, we trampled on memory which wasn't ours. Take our
big boots away by limiting the number of ports initialised to the
smaller of ...NR_UARTS and the array size.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 30 Jun 2005 16:04:14 +0000 (17:04 +0100)]
[PATCH] ARM: 2779/1: Fix the V bit setting for the ARM1020x CPUs
Patch from Catalin Marinas
This patch fixes the V bit setting for the ARM1020x processors. At
reset, this bit is automatically set to the value of the HIVECSINIT
input signal which just happened to be 1 but it is not mandatory.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 30 Jun 2005 16:04:14 +0000 (17:04 +0100)]
[PATCH] ARM: 2778/1: Add -mno-thumb-interwork to CFLAGS_ABI
Patch from Catalin Marinas
The new EABI gcc adds -mthumb-interwork by default, even if
-mabi=apcs-gnu is passed. This causes a warning for every compiled C
file when -march=armv4 is used. The patch adds -mno-thumb-interwork
if the option is supported. This is also useful since we don't need
any ARM/Thumb interworking in the kernel
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pekka Enberg [Thu, 30 Jun 2005 09:59:05 +0000 (02:59 -0700)]
[PATCH] freevxfs: minor cleanups
This patch addresses the following minor issues:
- Typo in printk
- Redundant casts
- Use C99 struct initializers instead of memset
- Parenthesis around return value
- Use inline instead of __inline__
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jay Lan [Thu, 30 Jun 2005 09:59:03 +0000 (02:59 -0700)]
[PATCH] Improper initrd failure message at boot time
On system boot up, there was an failure reported to boot.msg:
<5>Trying to move old root to /initrd ... failed
According to initrd(4) man page, step #7 of BOOT-UP OPERATION
is described as below:
7. If the normal root file has directory /initrd, device
/dev/ram0 is moved from / to /initrd. Otherwise if
directory /initrd does not exist device /dev/ram0 is
unmounted.
We got service calls from customers concerning about this failure message
at boot time. Many systems do not have /initrd and thus the message can be
changed in the case of non-existing /initrd so that it does not sound like
a failure of the system.
Signed-off-by: Jay Lan <jlan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Chris Zankel [Thu, 30 Jun 2005 09:58:59 +0000 (02:58 -0700)]
[PATCH] xtensa: Removed local copy of zlib and fixed O= support
Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out). Some minor
clean-ups in the make files.
Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Paris [Thu, 30 Jun 2005 09:58:51 +0000 (02:58 -0700)]
[PATCH] selinux_sb_copy_data() should not require a whole page
Currently selinux_sb_copy_data requires an entire page be allocated to
*orig when the function is called. This "requirement" is based on the fact
that we call copy_page(in_save, nosec_save) and in_save = orig when the
data is not FS_BINARY_MOUNTDATA. This means that if a caller were to call
do_kern_mount with only about 10 bytes of options, they would get passed
here and then we would corrupt PAGE_SIZE - 10 bytes of memory (with all
zeros.)
Currently it appears all in kernel FS's use one page of data so this has
not been a problem. An out of kernel FS did just what is described above
and it would almost always panic shortly after they tried to mount. From
looking else where in the kernel it is obvious that this string of data
must always be null terminated. (See example in do_mount where it always
zeros the last byte.) Thus I suggest we use strcpy in place of copy_page.
In this way we make sure the amount we copy is always less than or equal to
the amount we received and since do_mount is zeroing the last byte this
should be safe for all.
Signed-off-by: Eric Paris <eparis@parisplace.org> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Acked-by: James Morris <jmorris@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kylene Jo Hall [Thu, 30 Jun 2005 09:58:50 +0000 (02:58 -0700)]
[PATCH] tpm: fix bug introduced by the /proc/misc
In fixing the /proc/misc problem that was reported last week where the tpm
module name was being obfuscated in /proc/misc I introduced a bug in the
module unloading code. This patch fixes the problem.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Russell King [Thu, 30 Jun 2005 15:30:07 +0000 (16:30 +0100)]
[PATCH] ARM: Acornfb: Don't claim IRQ fbcon for cursor
The generic fbcon code tries to register and use the vsync IRQ for
ARM platforms with acornfb, but forgets to disable its own cursor
timer. The result is a flickering flashing cursor.
Remove the code from the fbcon core to register this platform
private interrupt.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 30 Jun 2005 10:06:49 +0000 (11:06 +0100)]
[PATCH] ARM: Don't try to send a signal to pid0
If we receive an unrecognised abort during boot, don't try to
send a signal to pid0, but instead report the current state.
This leads to less confusing debug reports.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patrick Mochel [Fri, 24 Jun 2005 15:39:33 +0000 (08:39 -0700)]
[PATCH] Driver core: Use klist_del() instead of klist_remove().
Use klist_del() instead of klist_remove() when unregistering devices.
This will prevent a deadlock when executing a recursive unregister using
device_for_each_child().
Signed-off-by Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH] driver core: change bus_rescan_devices to return void
No one was looking at the return value of bus_rescan_devices, and it
really wasn't anything that anyone in the kernel would ever care about.
So change it which enabled some counting code to be removed also.
[PATCH] driver core: Add the ability to bind drivers to devices from userspace
This adds a single file, "bind", to the sysfs directory of every driver
registered with the driver core. To bind a device to a driver, write
the bus id of the device you wish to bind to that specific driver to the
"bind" file (remember to not add a trailing \n). If that bus id matches
a device on that bus, and it does not currently have a driver bound to
it, the probe sequence will be initiated with that driver and device.
Note, this requires that the driver itself be willing and able to accept
that device (usually through a device id type table). This patch does
not make it possible to override the driver's id table.
[PATCH] driver core: Add the ability to unbind drivers to devices from userspace
This adds a single file, "unbind", to the sysfs directory of every
device that is currently bound to a driver. To unbind the driver from
the device, write anything to this file and they will be disconnected
from each other.
Michael Ellerman [Thu, 30 Jun 2005 05:17:02 +0000 (15:17 +1000)]
[PATCH] ppc64: Replace custom locking code with a spinlock
The hvlpevent_queue (formally ItLpQueue) has a member called xInUseWord
which is used for serialising access to the queue. Because it's a word
(ie. 32 bit) there's a custom 32-bit version of test_and_set_bit() or
thereabouts in ItLpQueue.c.
The xInUseWord is not shared with they hypervisor, so we can replace it
with a spinlock and remove the custom code.
There is also another locking mechanism (ItLpQueueInProcess). This is
redundant because it's only manipulated while the lock's held. Remove it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:16:48 +0000 (15:16 +1000)]
[PATCH] ppc64: Formatting cleanups in arch/ppc64/kernel/ItLpQueue.c
Just formatting cleanups:
* rename some "nextLpEvent" variables to just "event"
* make code fit in 80 columns
* use brackets around if/else
* use a temporary to make hvlpevent_clear_valid clearer
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:16:28 +0000 (15:16 +1000)]
[PATCH] ppc64: Cleanup whitespace in arch/ppc64/kernel/ItLpQueue.c
Just cleanup white space.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:16:18 +0000 (15:16 +1000)]
[PATCH] ppc64: Cleanup proc printing of event types
The code that prints event counts by type uses a hand-coded number of tabs
to get the alignment right. Instead use a printf alignment which will allow
allow us to use the event_type strings elsewhere in the future.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:16:09 +0000 (15:16 +1000)]
[PATCH] ppc64: Simplify counting of lpevents, remove lpevent_count from paca
Currently there's a per-cpu count of lpevents processed, a per-queue (ie.
global) total count, and a count by event type.
Replace all that with a count by event for each cpu. We only need to add
it up int the proc code.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:15:53 +0000 (15:15 +1000)]
[PATCH] ppc64: Don't count number of events processed for caller
Currently we count the number of lpevents processed in 3 seperate places.
One of these counters is never read, so just remove it. This means
hvlpevent_queue_process() no longer needs to return the number of events
processed.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:15:42 +0000 (15:15 +1000)]
[PATCH] ppc64: Rename ItLpQueue_* functions to hvlpevent_queue_*
Now that we've renamed the xItLpQueue structure, rename the functions that
operate on it also.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:15:32 +0000 (15:15 +1000)]
[PATCH] ppc64: Rename xItLpQueue to hvlpevent_queue
The xItLpQueue is a queue of HvLpEvents that we're given by the Hypervisor.
Rename xItLpQueue to hvlpevent_queue and make the type struct hvlpevent_queue.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:12:21 +0000 (15:12 +1000)]
[PATCH] ppc64: Move definition of xItLpQueue
The xItLpQueue is declared in LparData.c, move it into ItLpQueue.c.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:08:56 +0000 (15:08 +1000)]
[PATCH] ppc64: Make two ItLpQueue related functions static
External parties don't need to use ItLpQueue_getNextLpEvent() or
ItLpQueue_clearValid(), they're internal to ItLpQueue.c
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:08:44 +0000 (15:08 +1000)]
[PATCH] ppc64: Move xItLpQueue proc code into ItLpQueue.c
Move the code that displays xItLpQueue values in /proc into
ItLpQueue.c.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:08:27 +0000 (15:08 +1000)]
[PATCH] ppc64: Move initialisation of xItLpQueue into ItLpQueue.c
The xItLpQueue is initalised manually in iSeries_setup_arch(). Move
this code into ItLpQueue.c for a cleaner separation.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:07:57 +0000 (15:07 +1000)]
[PATCH] ppc64: Don't pass the pointers to xItLpQueue around
Because there's only one ItLpQueue and we know where it is, ie. xItLpQueue,
there's no point passing pointers to it it around all over the place.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 30 Jun 2005 05:07:48 +0000 (15:07 +1000)]
[PATCH] ppc64: Reorganise the paca initialisation macros
This patch updates the macros that initialise the paca to remove the lpq
parameter. It also rearranges them a bit with the hope of making them a
bit clearer.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
projects / linux-2.6 / log