Bernhard Walle [Thu, 26 Jun 2008 07:23:21 +0000 (09:23 +0200)]
x86, crashdump, /proc/vmcore: remove CONFIG_EXPERIMENTAL from kdump
I would suggest to remove the "experimental" status from Kdump.
Kdump is now in the kernel since a long time and used by Enterprise
distributions. I don't think that "experimental" is true any more.
Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: vgoyal@redhat.com Cc: kexec@lists.infradead.org Cc: Bernhard Walle <bwalle@suse.de> Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Jackson [Wed, 25 Jun 2008 12:44:46 +0000 (05:44 -0700)]
x86 boot: only pick up additional EFI memmap if add_efi_memmap flag
Applies on top of the previous patch:
x86 boot: add code to add BIOS provided EFI memory entries to kernel
Instead of always adding EFI memory map entries (if present) to the
memory map after initially finding either E820 BIOS memory map entries
and/or kernel command line memmap entries, -instead- only add such
additional EFI memory map entries if the kernel boot option:
add_efi_memmap
is specified.
Requiring this 'add_efi_memmap' option is backward compatible with
kernels that didn't load such additional EFI memory map entries in
the first place, and it doesn't override a configuration that tries
to replace all E820 or EFI BIOS memory map entries with ones given
entirely on the kernel command line.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Cc: "Jack Steiner" <steiner@sgi.com> Cc: "Mike Travis" <travis@sgi.com> Cc: "Huang Cc: Ying" <ying.huang@intel.com> Cc: "Andi Kleen" <andi@firstfloor.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Jackson [Wed, 25 Jun 2008 12:44:40 +0000 (05:44 -0700)]
mm, generic, x86 boot: more tweaks to hex prints of some pfn addresses
Fix some problems with (and applies on top of) a previous patch:
x86 boot: show pfn addresses in hex not decimal in some kernel info printks
Primarily change "0x%8lx" format, which displays with a right aligned
space filled hex number (spaces between the "0x" prefix and the number),
into "%0#10lx" format, which zero fills instead of space fills, and
which uses the printf flag '#' to request the "0x" prefix instead of
hard coding it.
Also replace some other "0x%lx" formats with "%#lx", making use of the
'#' printf flag again.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Cc: "Jack Steiner" <steiner@sgi.com> Cc: "Mike Travis" <travis@sgi.com> Cc: "Huang Cc: Ying" <ying.huang@intel.com> Cc: "Andi Kleen" <andi@firstfloor.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a preparatory patch for the next patch in series.
Moves some code from e820_setup_gap to a new function e820_search_gap.
This patch is a part of a bug fix where we walk the ACPI table to calculate
a gap for PCI optional devices.
v1->v2: Patch on top of tip/master.
Fixes a bug introduced in the last patch about the typeof "last".
Also the new function e820_search_gap now returns if we found a gap in
e820_map.
Yinghai Lu [Tue, 24 Jun 2008 21:57:29 +0000 (14:57 -0700)]
x86: add table_top check for alloc_low_page in 64 bit
that range is from find_e820_area, so don't try to use end_pfn to see
if out of boundary...use table_top instead to avoid possible strange
result while cross the boundary...
also change early_printk to printk, because init_memory_mapping is after
early param parsing, and console=uart8250 already working at that time.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
wrmsr is a special instruction which can have arbitrary system-wide
effects. We don't want the compiler to reorder it with respect to
memory operations, so make it a memory barrier.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add "memory" clobbers to savesegment and loadsegment, since they can
affect memory accesses and we never want the compiler to reorder them
with respect to memory references.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cyrill Gorcunov [Tue, 24 Jun 2008 20:52:05 +0000 (22:52 +0200)]
x86: nmi_watchdog - use NMI_NONE by default
There is no need to keep NMI_DISABLED definition and use it
for nmi_watchdog by default. Here is the point why:
- IO-APIC and APIC chips are programmed for nmi_watchdog support at very
early stage of kernel booting and not having nmi_watchdog specified as
boot option lead only to nmi_watchdog becomes to NMI_NONE anyway
- enable nmi_watchdog thru /proc/sys/kernel/nmi if it was not specified at
boot is not possible too (even having this sysfs entry)
Paul Jackson [Sun, 22 Jun 2008 14:22:17 +0000 (07:22 -0700)]
x86 boot: more consistently use type int for node ids
Everywhere I look, node id's are of type 'int', except in this one
case, which has 'unsigned long'. Change this one to 'int' as well.
There is nothing special about the way this variable 'nid' is used in
this routine to justify using an unusual type here.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Cc: "Jack Steiner" <steiner@sgi.com> Cc: "Mike Travis" <travis@sgi.com> Cc: "Huang Cc: Ying" <ying.huang@intel.com> Cc: "Andi Kleen" <andi@firstfloor.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Jackson [Sun, 22 Jun 2008 14:22:12 +0000 (07:22 -0700)]
x86 boot: show pfn addresses in hex not decimal in some kernel info printks
Page frame numbers (the portion of physical addresses above the low
order page offsets) are displayed in several kernel debug and info
prints in decimal, not hex. Decimal addresse are unreadable. Use hex.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Cc: "Jack Steiner" <steiner@sgi.com> Cc: "Mike Travis" <travis@sgi.com> Cc: "Huang Cc: Ying" <ying.huang@intel.com> Cc: "Andi Kleen" <andi@firstfloor.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Jackson [Sun, 22 Jun 2008 14:22:07 +0000 (07:22 -0700)]
x86 boot: allow overlapping early reserve memory ranges
Add support for overlapping early memory reservations.
In general, they still can't overlap, and will panic
with "Overlapping early reservations" if they do overlap.
But if a memory range is reserved with the new call:
reserve_early_overlap_ok()
rather than with the usual call:
reserve_early()
then subsequent early reservations are allowed to overlap.
This new reserve_early_overlap_ok() call is only used in one
place so far, which is the "BIOS reserved" reservation for the
the EBDA region, which out of Paranoia reserves more than what
the BIOS might have specified, and which thus might overlap with
another legitimate early memory reservation (such as, perhaps,
the EFI memmap.)
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Cc: "Jack Steiner" <steiner@sgi.com> Cc: "Mike Travis" <travis@sgi.com> Cc: "Huang Cc: Ying" <ying.huang@intel.com> Cc: "Andi Kleen" <andi@firstfloor.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Jackson [Sun, 22 Jun 2008 14:22:02 +0000 (07:22 -0700)]
x86 boot: x86_64 efi compiler warning fix
Fix a compiler warning. Rather than always casting a u32 to a pointer
(which generates a warning on x86_64 systems) instead separate the
x86_32 and x86_64 assignments entirely with ifdefs. Until other recent
changes to this code, it used to have x86_64 separated like this.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Cc: "Jack Steiner" <steiner@sgi.com> Cc: "Mike Travis" <travis@sgi.com> Cc: "Huang Cc: Ying" <ying.huang@intel.com> Cc: "Andi Kleen" <andi@firstfloor.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Mon, 23 Jun 2008 20:19:22 +0000 (22:19 +0200)]
x86: build fix
fix:
arch/x86/kernel/setup_32.c:409: error: 'enable_local_apic' undeclared (first use in this function)
arch/x86/kernel/setup_32.c:409: error: (Each undeclared identifier is reported only once
arch/x86/kernel/setup_32.c:409: error: for each function it appears in.)
Yinghai Lu [Sat, 21 Jun 2008 08:14:27 +0000 (01:14 -0700)]
x86: clean up init_amd()
1. move out calling of check_enable_amd_mmconf_dmi out of setup_64.c
put it into init_amd(), so don't need to make extra dmi check for
system with other cpus.
2. 15 --> 0xf
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 13 Jun 2008 18:31:54 +0000 (20:31 +0200)]
x86: fix sleep.c build error
fix:
arch/x86/kernel/acpi/sleep.c: In function ‘acpi_save_state_mem':
arch/x86/kernel/acpi/sleep.c:75: error: ‘stack_start' undeclared (first use in this function)
arch/x86/kernel/acpi/sleep.c:75: error: (Each undeclared identifier is reported
only once
arch/x86/kernel/acpi/sleep.c:75: error: for each function it appears in.)
Glauber Costa [Thu, 5 Jun 2008 06:05:39 +0000 (23:05 -0700)]
x86: take load_sp0 out of smpboot.c
there's no particular reason to do load_sp0 in different
places for i386 and x86_64. They should all be in cpu_init.
Right now, cpu_init itself is not integrated, but with this patch,
the code becomes closer to each other, making in easier to integrate
when the time comes.
Furthermore, although doing it in do_boot_cpu for x86_64 is fine, since it's
only a copy, load_sp0 should be executed in the cpu it refers to anyway.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Wed, 4 Jun 2008 05:03:07 +0000 (02:03 -0300)]
x86: change naming to match x86_64
Change unmap_cpu_to_logical_apicid to numa_remove_cpu.
Besides being shorter, it is the same name x86_64 uses. We
can save an ifdef in the code this way.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Thu, 29 May 2008 03:34:19 +0000 (20:34 -0700)]
x86: change __setup_vector_irq with setup_vector_irq
We create a version of it for i386, and then take the CONFIG_X86_64
ifdef out of the game. We could create a __setup_vector_irq for i386,
but it would incur in an unnecessary lock taking. Moreover, it is better
practice to only export setup_vector_irq anyway.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Thu, 29 May 2008 03:05:46 +0000 (20:05 -0700)]
x86: remove ifdef from stepping
The stepping won't affect x86_64, since there are not x86_64 k7's
or pentiums. So, although it adds to the binary size, remove the ifdef
for smoother integration
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Wed, 28 May 2008 15:57:02 +0000 (12:57 -0300)]
x86: use initial_code for i386
x86_64 jumps to whatever is written in "initial_code" symbol,
instead of a fixed address. Do it for i386 too. It will allow us
to integrate more of the smp boot code.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Wed, 28 May 2008 23:19:53 +0000 (16:19 -0700)]
x86: move x86_64 gdt closer to i386
i386 and x86_64 used two different schemes for maintaining the gdt.
With this patch, x86_64 initial gdt table is defined in a .c file,
same way as i386 is now. Also, we call it "gdt_page", and the descriptor,
"early_gdt_descr". This way we achieve common naming, which can allow for
more code integration.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Wed, 28 May 2008 01:22:54 +0000 (18:22 -0700)]
x86: use stack_start in x86_64
call x86_64's init_rsp stack_start, just as i386 does.
Put a zeroed stack segment for consistency. With this,
we can eliminate one ugly ifdef in smpboot.c.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
build: add __page_aligned_data and __page_aligned_bss
Making a variable page-aligned by using
__attribute__((section(".data.page_aligned"))) is fragile because if
sizeof(variable) is not also a multiple of page size, it leaves
variables in the remainder of the section unaligned.
This patch introduces two new qualifiers, __page_aligned_data and
__page_aligned_bss to set the section *and* the alignment of
variables. This makes page-aligned variables more robust because the
linker will make sure they're aligned properly. Unfortunately it
requires *all* page-aligned data to use these macros...
projects / linux-2.6 / log