Some simplification in checking signal delivery against concurrent exit.
Instead of using get_task_struct_rcu(), which increments the task_struct
reference count, check the reference count after acquiring sighand lock.
Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Sun, 8 Jan 2006 09:01:37 +0000 (01:01 -0800)]
[PATCH] RCU signal handling
RCU tasklist_lock and RCU signal handling: send signals RCU-read-locked
instead of tasklist_lock read-locked. This is a scalability improvement on
SMP and a preemption-latency improvement under PREEMPT_RCU.
Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: William Irwin <wli@holomorphy.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Applying RCU to the task structure broke oprofile, because
free_task_notify() can now be called from softirq. This means that the
task_mortuary lock must be acquired with irq disabled in order to avoid
intermittent self-deadlock. Since irq is now disabled, the critical
section within process_task_mortuary() has been restructured to be O(1) in
order to maximize scalability and minimize realtime latency degradation.
Kudos to Wu Fengguang for finding this problem!
CC: Wu Fengguang <wfg@mail.ustc.edu.cn> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adrian Bunk [Sun, 8 Jan 2006 09:01:34 +0000 (01:01 -0800)]
[PATCH] uml: prevent MODE_SKAS=n and MODE_TT=n
If MODE_TT=n, MODE_SKAS must be y.
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Sun, 8 Jan 2006 09:01:33 +0000 (01:01 -0800)]
[PATCH] uml: whitespace cleanup
This fixes some mangled whitespace added by the earlier trap_user.c patch.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Dike [Sun, 8 Jan 2006 09:01:32 +0000 (01:01 -0800)]
[PATCH] consolidate asm/futex.h
Most of the architectures have the same asm/futex.h. This consolidates them
into asm-generic, with the arches including it from their own asm/futex.h.
In the case of UML, this reverts the old broken futex.h and goes back to using
the same one as almost everyone else.
Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Change maxaligned_in_smp alignemnt macros to internodealigned_in_smp macros
____cacheline_maxaligned_in_smp is currently used to align critical structures
and avoid false sharing. It uses per-arch L1_CACHE_SHIFT_MAX and people find
L1_CACHE_SHIFT_MAX useless.
However, we have been using ____cacheline_maxaligned_in_smp to align
structures on the internode cacheline size. As per Andi's suggestion,
following patch kills ____cacheline_maxaligned_in_smp and introduces
INTERNODE_CACHE_SHIFT, which defaults to L1_CACHE_SHIFT for all arches.
Arches needing L3/Internode cacheline alignment can define
INTERNODE_CACHE_SHIFT in the arch asm/cache.h. Patch replaces
____cacheline_maxaligned_in_smp with ____cacheline_internodealigned_in_smp
David Howells [Sun, 8 Jan 2006 09:01:23 +0000 (01:01 -0800)]
[PATCH] frv: force serial driver inclusion
Force the 8230 serial driver to be built in if the on-CPU UARTs are to be
used. It can't be used as a module because the arch setup needs to call into
it.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] fix Kconfig depends for cs89x0 (PNX010X support)
PNX010X support for CS89x0 should be conditional on NET_PCI, as it is an 'on
board controller' and NET_PCI includes that category of NICs. Since
ARCH_PNX0105 was recently changed to ARCH_PNX010X, incorporate that change as
well while we're at it.
[PATCH] cs89x0: cleanly implement ixdp2x01 and pnx0501 support
Implement suitable versions of the readword/writeword macros for ixdp2x01 and
pnx0501. Handle the 32-bit spacing of the registers in these functions
instead of in the header file.
[PATCH] cs89x0: make {read,write}word take base_addr
readword() and writeword() take a 'struct net_device *' and deref its
->base_addr member. Make them take the base_addr directly instead, so
that we can switch the other occurences of inw/outw in the file over
to readword/writeword as well.
[PATCH] Move page migration related functions near do_migrate_pages()
Group page migration functions in mempolicy.c
Add a forward declaration for migrate_page_add (like gather_stats()) and use
our new found mobility to group all page migration related function around
do_migrate_pages().
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Drop page table lock before calling migrate_page_add()
migrate_page_add cannot be called with a spinlock held (calls
isolate_lru_page which calles schedule_on_each_cpu). Drop ptl lock in
check_pte_range before calling migrate_page_add().
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] mempolicies: private pointer in check_range and MPOL_MF_INVERT
This was was first posted at
http://marc.theaimsgroup.com/?l=linux-mm&m=113149240227584&w=2
(Part of this functionality is also contained in the direct migration
pathset. The functionality here is more generic and independent of that
patchset.)
- Add internal flags MPOL_MF_INVERT to control check_range() behavior.
- Replace the pagelist passed through by check_range by a general
private pointer that may be used for other purposes.
(The following patches will use that to merge numa_maps into
mempolicy.c and to better group the page migration code in
the policy layer)
- Improve some comments.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Sun, 8 Jan 2006 09:00:56 +0000 (01:00 -0800)]
[PATCH] cpusets: swap migration interface
Add a boolean "memory_migrate" to each cpuset, represented by a file
containing "0" or "1" in each directory below /dev/cpuset.
It defaults to false (file contains "0"). It can be set true by writing
"1" to the file.
If true, then anytime that a task is attached to the cpuset so marked, the
pages of that task will be moved to that cpuset, preserving, to the extent
practical, the cpuset-relative placement of the pages.
Also anytime that a cpuset so marked has its memory placement changed (by
writing to its "mems" file), the tasks in that cpuset will have their pages
moved to the cpusets new nodes, preserving, to the extent practical, the
cpuset-relative placement of the moved pages.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] SwapMig: Extend parameters for migrate_pages()
Extend the parameters of migrate_pages() to allow the caller control over the
fate of successfully migrated or impossible to migrate pages.
Swap migration and direct migration will have the same interface after this
patch so that patches can be independently applied to the policy layer and the
core migration code.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If a page is encountered that is only referenced by the migration code then
there is no reason to swap or migrate the page. Release the page by calling
move_to_lru().
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
add_to_swap does allocations with GFP_ATOMIC in order not to interfere with
swapping. During migration we may have use add_to_swap extensively which may
lead to out of memory errors.
This patch makes add_to_swap take a parameter that specifies the gfp mask.
The page migration code can then make add_to_swap use GFP_KERNEL.
Signed-off-by: Hirokazu Takahashi <taka@valinux.co.jp> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
sys_migrate_pages implementation using swap based page migration
This is the original API proposed by Ray Bryant in his posts during the first
half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org.
The intent of sys_migrate is to migrate memory of a process. A process may
have migrated to another node. Memory was allocated optimally for the prior
context. sys_migrate_pages allows to shift the memory to the new node.
sys_migrate_pages is also useful if the processes available memory nodes have
changed through cpuset operations to manually move the processes memory. Paul
Jackson is working on an automated mechanism that will allow an automatic
migration if the cpuset of a process is changed. However, a user may decide
to manually control the migration.
This implementation is put into the policy layer since it uses concepts and
functions that are also needed for mbind and friends. The patch also provides
a do_migrate_pages function that may be useful for cpusets to automatically
move memory. sys_migrate_pages does not modify policies in contrast to Ray's
implementation.
The current code here is based on the swap based page migration capability and
thus is not able to preserve the physical layout relative to it containing
nodeset (which may be a cpuset). When direct page migration becomes available
then the implementation needs to be changed to do a isomorphic move of pages
between different nodesets. The current implementation simply evicts all
pages in source nodeset that are not in the target nodeset.
Patch supports ia64, i386 and x86_64.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add page migration support via swap to the NUMA policy layer
This patch adds page migration support to the NUMA policy layer. An
additional flag MPOL_MF_MOVE is introduced for mbind. If MPOL_MF_MOVE is
specified then pages that do not conform to the memory policy will be evicted
from memory. When they get pages back in new pages will be allocated
following the numa policy.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Swap Migration V5: migrate_pages() function
This adds the basic page migration function with a minimal implementation that
only allows the eviction of pages to swap space.
Page eviction and migration may be useful to migrate pages, to suspend
programs or for remapping single pages (useful for faulty pages or pages with
soft ECC failures)
The process is as follows:
The function wanting to migrate pages must first build a list of pages to be
migrated or evicted and take them off the lru lists via isolate_lru_page().
isolate_lru_page determines that a page is freeable based on the LRU bit set.
Then the actual migration or swapout can happen by calling migrate_pages().
migrate_pages does its best to migrate or swapout the pages and does multiple
passes over the list. Some pages may only be swappable if they are not dirty.
migrate_pages may start writing out dirty pages in the initial passes over
the pages. However, migrate_pages may not be able to migrate or evict all
pages for a variety of reasons.
The remaining pages may be returned to the LRU lists using putback_lru_pages().
Changelog V4->V5:
- Use the lru caches to return pages to the LRU
Changelog V3->V4:
- Restructure code so that applying patches to support full migration does
require minimal changes. Rename swapout_pages() to migrate_pages().
Changelog V2->V3:
- Extract common code from shrink_list() and swapout_pages()
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is the start of the `swap migration' patch series.
Swap migration allows the moving of the physical location of pages between
nodes in a numa system while the process is running. This means that the
virtual addresses that the process sees do not change. However, the system
rearranges the physical location of those pages.
The main intent of page migration patches here is to reduce the latency of
memory access by moving pages near to the processor where the process
accessing that memory is running.
The patchset allows a process to manually relocate the node on which its
pages are located through the MF_MOVE and MF_MOVE_ALL options while
setting a new memory policy.
The pages of process can also be relocated from another process using the
sys_migrate_pages() function call. Requires CAP_SYS_ADMIN. The migrate_pages
function call takes two sets of nodes and moves pages of a process that are
located on the from nodes to the destination nodes.
Manual migration is very useful if for example the scheduler has relocated a
process to a processor on a distant node. A batch scheduler or an
administrator can detect the situation and move the pages of the process
nearer to the new processor.
sys_migrate_pages() could be used on non-numa machines as well, to force all
of a particualr process's pages out to swap, if someone thinks that's useful.
Larger installations usually partition the system using cpusets into sections
of nodes. Paul has equipped cpusets with the ability to move pages when a
task is moved to another cpuset. This allows automatic control over locality
of a process. If a task is moved to a new cpuset then also all its pages are
moved with it so that the performance of the process does not sink
dramatically (as is the case today).
Swap migration works by simply evicting the page. The pages must be faulted
back in. The pages are then typically reallocated by the system near the node
where the process is executing.
For swap migration the destination of the move is controlled by the allocation
policy. Cpusets set the allocation policy before calling sys_migrate_pages()
in order to move the pages as intended.
No allocation policy changes are performed for sys_migrate_pages(). This
means that the pages may not faulted in to the specified nodes if no
allocation policy was set by other means. The pages will just end up near the
node where the fault occurred.
There's another patch series in the pipeline which implements "direct
migration".
The direct migration patchset extends the migration functionality to avoid
going through swap. The destination node of the relation is controllable
during the actual moving of pages. The crutch of using the allocation policy
to relocate is not necessary and the pages are moved directly to the target.
Its also faster since swap is not used.
And sys_migrate_pages() can then move pages directly to the specified node.
Implement functions to isolate pages from the LRU and put them back later.
This patch:
An earlier implementation was provided by Hirokazu Takahashi
<taka@valinux.co.jp> and IWAMOTO Toshihiro <iwamoto@valinux.co.jp> for the
memory hotplug project.
From: Magnus
This breaks out isolate_lru_page() and putpack_lru_page(). Needed for swap
migration.
Signed-off-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
swap migration's isolate_lru_page() currently uses an IPI to notify other
processors that the lru caches need to be drained if the page cannot be
found on the LRU. The IPI interrupt may interrupt a processor that is just
processing lru requests and cause a race condition.
This patch introduces a new function run_on_each_cpu() that uses the
keventd() to run the LRU draining on each processor. Processors disable
preemption when dealing the LRU caches (these are per processor) and thus
executing LRU draining from another process is safe.
Thanks to Lee Schermerhorn <lee.schermerhorn@hp.com> for finding this race
condition.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nick Piggin [Sun, 8 Jan 2006 09:00:42 +0000 (01:00 -0800)]
[PATCH] mm: free_pages opt
Try to streamline free_pages_bulk by ensuring callers don't pass in a
'count' that exceeds the list size.
Some cleanups:
Rename __free_pages_bulk to __free_one_page.
Put the page list manipulation from __free_pages_ok into free_one_page.
Make __free_pages_ok static.
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rohit Seth [Sun, 8 Jan 2006 09:00:40 +0000 (01:00 -0800)]
[PATCH] Make high and batch sizes of per_cpu_pagelists configurable
As recently there has been lot of traffic on the right values for batch and
high water marks for per_cpu_pagelists. This patch makes these two
variables configurable through /proc interface.
A new tunable /proc/sys/vm/percpu_pagelist_fraction is added. This entry
controls the fraction of pages at most in each zone that are allocated for
each per cpu page list. The min value for this is 8. It means that we
don't allow more than 1/8th of pages in each zone to be allocated in any
single per_cpu_pagelist.
The batch value of each per cpu pagelist is also updated as a result. It
is set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
Andrew Morton [Sun, 8 Jan 2006 09:00:39 +0000 (01:00 -0800)]
[PATCH] drop-pagecache
Add /proc/sys/vm/drop_caches. When written to, this will cause the kernel to
discard as much pagecache and/or reclaimable slab objects as it can. THis
operation requires root permissions.
It won't drop dirty data, so the user should run `sync' first.
Caveats:
a) Holds inode_lock for exorbitant amounts of time.
b) Needs to be taught about NUMA nodes: propagate these all the way through
so the discarding can be controlled on a per-node basis.
This is a debugging feature: useful for getting consistent results between
filesystem benchmarks. We could possibly put it under a config option, but
it's less than 300 bytes.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pekka Enberg [Sun, 8 Jan 2006 09:00:36 +0000 (01:00 -0800)]
[PATCH] slab: extract slab order calculation to separate function
This patch moves the ugly loop that determines the 'optimal' size (page order)
of cache slabs from kmem_cache_create() to a separate function and cleans it
up a bit.
Thanks to Matthew Wilcox for the help with this patch.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pekka Enberg [Sun, 8 Jan 2006 09:00:33 +0000 (01:00 -0800)]
[PATCH] slab: remove unused align parameter from alloc_percpu
__alloc_percpu and alloc_percpu both take an 'align' argument which is
completely ignored. snmp6_mib_init() in net/ipv6/af_inet6.c attempts to use
it, but it will be ignored. Therefore, remove the 'align' argument and fixup
the lone caller.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Acked-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Olaf Hering [Sun, 8 Jan 2006 09:00:32 +0000 (01:00 -0800)]
[PATCH] Fix compilation with CONFIG_MEMORY_HOTPLUG=y and gcc41.
Fix compilation with CONFIG_MEMORY_HOTPLUG=y and gcc41.
Also remove unneeded declations, add a public function.
drivers/base/memory.c:53: error: static declaration of 'register_memory_notifier' follows non-static declaration
include/linux/memory.h:85: error: previous declaration of 'register_memory_notifier' was here
drivers/base/memory.c:58: error: static declaration of 'unregister_memory_notifier' follows non-static declaration
include/linux/memory.h:86: error: previous declaration of 'unregister_memory_notifier' was here
drivers/base/memory.c:68: error: static declaration of 'register_memory' follows non-static declaration
include/linux/memory.h:73: error: previous declaration of 'register_memory' was here
Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Woody Suwalski [Sun, 8 Jan 2006 09:00:31 +0000 (01:00 -0800)]
[PATCH] ARM Netwinder watchdog wdt977 update
Cleanup for the ARM-only watchdog driver wdt977.
This is probably the last update, since we want to merge with w83977f_wdt.
Jose Goncalves has ported this driver to i386, so probably we can iron out
configuration differences.
Signed-off-by: Woody Suwalski <woodys@xandros.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adrian Bunk [Sat, 7 Jan 2006 21:24:25 +0000 (13:24 -0800)]
[IPV6]: small cleanups
This patch contains the following cleanups:
- addrconf.c: make addrconf_dad_stop() static
- inet6_connection_sock.c should #include <net/inet6_connection_sock.h>
for getting the prototypes of it's global functions
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:06:30 +0000 (23:06 -0800)]
[NETFILTER]: Handle NAT in IPsec policy checks
Handle NAT of decapsulated IPsec packets by reconstructing the struct flowi
of the original packet from the conntrack information for IPsec policy
checks.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:06:10 +0000 (23:06 -0800)]
[NETFILTER]: Keep conntrack reference until IPsec policy checks are done
Keep the conntrack reference until policy checks have been performed for
IPsec NAT support. The reference needs to be dropped before a packet is
queued to avoid having the conntrack module unloadable.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:05:36 +0000 (23:05 -0800)]
[NETFILTER]: Redo policy lookups after NAT when neccessary
When NAT changes the key used for the xfrm lookup it needs to be done
again. If a new policy is returned in POST_ROUTING the packet needs
to be passed to xfrm4_output_one manually after all hooks were called
because POST_ROUTING is called with fixed okfn (ip_finish_output).
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:05:17 +0000 (23:05 -0800)]
[NETFILTER]: Use conntrack information to determine if packet was NATed
Preparation for IPsec support for NAT:
Use conntrack information instead of saving the saving and comparing the
addresses to determine if a packet was NATed and needs to be rerouted to
make it easier to extend the key.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:04:54 +0000 (23:04 -0800)]
[NETFILTER]: Fix xfrm lookup in ip_route_me_harder/ip6_route_me_harder
ip_route_me_harder doesn't use the port numbers of the xfrm lookup and
uses ip_route_input for non-local addresses which doesn't do a xfrm
lookup, ip6_route_me_harder doesn't do a xfrm lookup at all.
Use xfrm_decode_session and do the lookup manually, make sure both
only do the lookup if the packet hasn't been transformed already.
Makeing sure the lookup only happens once needs a new field in the
IP6CB, which exceeds the size of skb->cb. The size of skb->cb is
increased to 48b. Apparently the IPv6 mobile extensions need some
more room anyway.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:04:01 +0000 (23:04 -0800)]
[IPV4]: reset IPCB flags when neccessary
Reset IPSKB_XFRM_TUNNEL_SIZE flags in ipip and ip_gre hard_start_xmit
function before the packet reenters IP. This is neccessary so the
encapsulated packets are checked not to be oversized in xfrm4_output.c
again. Reset all flags in sit when a packet changes its address family.
Also remove some obsolete IPSKB flags.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:03:34 +0000 (23:03 -0800)]
[IPV4/6]: Netfilter IPsec input hooks
When the innermost transform uses transport mode the decapsulated packet
is not visible to netfilter. Pass the packet through the PRE_ROUTING and
LOCAL_IN hooks again before handing it to upper layer protocols to make
netfilter-visibility symetrical to the output path.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:02:34 +0000 (23:02 -0800)]
[IPV6]: Move nextheader offset to the IP6CB
Move nextheader offset to the IP6CB to make it possible to pass a
packet to ip6_input_finish multiple times and have it skip already
parsed headers. As a nice side effect this gets rid of the manual
hopopts skipping in ip6_input_finish.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sat, 7 Jan 2006 07:01:48 +0000 (23:01 -0800)]
[XFRM]: Netfilter IPsec output hooks
Call netfilter hooks before IPsec transforms. Packets visit the
FORWARD/LOCAL_OUT and POST_ROUTING hook before the first encapsulation
and the LOCAL_OUT and POST_ROUTING hook before each following tunnel mode
transform.
Patch from Herbert Xu <herbert@gondor.apana.org.au>:
Move the loop from dst_output into xfrm4_output/xfrm6_output since they're
the only ones who need to it. xfrm{4,6}_output_one() processes the first SA
all subsequent transport mode SAs and is called in a loop that calls the
netfilter hooks between each two calls.
In order to avoid the tail call issue, I've added the inline function
nf_hook which is nf_hook_slow plus the empty list check.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Capitulino [Sat, 7 Jan 2006 06:59:43 +0000 (22:59 -0800)]
[XFRM]: Fix sparse warning.
security/selinux/xfrm.c:155:10: warning: Using plain integer as NULL pointer
Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Knut Petersen [Sat, 7 Jan 2006 09:22:04 +0000 (10:22 +0100)]
[PATCH] fbcon: don´t call set_par() in fbcon_init() if vc_mode == KD_GRAPHICS
Nothing prevents a user to modprobe a framebuffer driver from e.g. the
xterm prompt. As a result, the set_par() function of the driver will be
called from fbcon_init().
This is fatal as a lot of X / framebuffer combinations are unable to
recover from set_par() reprogramming the graphics controller in
KD_GRAPHICS mode.
It is also unnecessary as the set_par() function will be called during a
switch to KD_TEXT anyway. Because of this no side effects are possible.
Russell King [Sat, 7 Jan 2006 13:52:45 +0000 (13:52 +0000)]
[ARM] Move AMBA include files to include/linux/amba/
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use. Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Andre McCurdy [Sat, 7 Jan 2006 11:39:20 +0000 (11:39 +0000)]
[ARM] 3239/1: Add ARM optimised swab32
Patch from Andre McCurdy
Replaces generic swab32 routine with a more ARM friendly version.
Reduces kernel text size by approx 1200 bytes when compiled with
3.4.4 and approx 2400 bytes with 4.0.2
Probably some performance benefit as well.
Signed-off-by: Andre McCurdy <armccurdy@yahoo.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
projects / linux-2.6 / log