]> err.no Git - linux-2.6/log
linux-2.6
16 years agoV4L/DVB (6626): CXUSB: support only-read i2c requests
Chris Pascoe [Mon, 19 Nov 2007 06:01:22 +0000 (03:01 -0300)]
V4L/DVB (6626): CXUSB: support only-read i2c requests

Any i2c read request that was not immediately preceded by a write request was
incorrectly taking the write path.  Add the capability to handle individual
read requests.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6625): CXUSB: i2c transfer failure notification
Chris Pascoe [Mon, 19 Nov 2007 05:48:27 +0000 (02:48 -0300)]
V4L/DVB (6625): CXUSB: i2c transfer failure notification

The i2c master_xfer routine should return a negative result if not all
transfers completed successfully.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6624): CXUSB: return control message transfer result to caller
Chris Pascoe [Mon, 19 Nov 2007 05:42:44 +0000 (02:42 -0300)]
V4L/DVB (6624): CXUSB: return control message transfer result to caller

Callers to cxusb_ctrl_msg currently do not receive any indication that their
transfer failed.  Return the true return code from dvb_usb_generic_{rw,write}.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6623): remove saa7134-oss
Adrian Bunk [Wed, 21 Nov 2007 22:55:52 +0000 (19:55 -0300)]
V4L/DVB (6623): remove saa7134-oss

The saa7134-oss is deprecated for quite some time, it's the only remaining OSS
user outside of sound/oss/, and considering how few and what kind of
soundcards are left supported by OSS I hardly see any use cases left.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6622): tda827x: prevent possible NULL pointer dereference in tda827xa_lna_gain
Michael Krufky [Thu, 22 Nov 2007 17:40:25 +0000 (14:40 -0300)]
V4L/DVB (6622): tda827x: prevent possible NULL pointer dereference in tda827xa_lna_gain

If tda827x_config hasn't been defined, exit the function.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6621): tda827x: fix NULL pointer dereference during tda827x_probe_version
Michael Krufky [Sun, 18 Nov 2007 17:15:42 +0000 (14:15 -0300)]
V4L/DVB (6621): tda827x: fix NULL pointer dereference during tda827x_probe_version

Fix the following oops:

[  750.807586] CPU:    1
[  750.807587] EIP:    0060:[<f9dde2a3>]    Tainted: P       VLI
[  750.807589] EFLAGS: 00010296   (2.6.22-14-generic #1)
[  750.807599] EIP is at tda827x_probe_version+0xc3/0x130 [tda827x]
[  750.807603] eax: 00000000   ebx: f5a45a00   ecx: 00000000   edx: 00000001
[  750.807607] esi: f9de05ac   edi: e9b897e0   ebp: ed8015ac   esp: ed735f58
[  750.807611] ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
[  750.807615] Process kdvb-fe-1 (pid: 10662, ti=ed734000 task=d3b76530 task.ti=ed734000)
[  750.807618] Stack: f9e23972 00000038 ed735fd0 00010060 41ae0001 ed735f73 88b89608 e9b89608
[  750.807629]        e9b89608 ed801400 f9dde338 e9b89608 f9b2a46b 000000ae 00000a18 d3b76640
[  750.807639]        fffffffc f9b2bad6 00000003 f4433e68 e962b8c0 f4433e64 00000292 ed735fd0
[  750.807649] Call Trace:
[  750.807653]  [<f9e23972>] tda10046_init+0x2d2/0x6c0 [tda1004x]
[  750.807700]  [<f9dde338>] tda827x_initial_init+0x8/0x20 [tda827x]
[  750.807713]  [<f9b2a46b>] dvb_frontend_init+0x2b/0x60 [dvb_core]
[  750.807745]  [<f9b2bad6>] dvb_frontend_thread+0x66/0x2f0 [dvb_core]
[  750.807780]  [complete+64/96] complete+0x40/0x60
[  750.807805]  [<f9b2ba70>] dvb_frontend_thread+0x0/0x2f0 [dvb_core]
[  750.807822]  [kthread+66/112] kthread+0x42/0x70
[  750.807828]  [kthread+0/112] kthread+0x0/0x70
[  750.807841]  [kernel_thread_helper+7/16] kernel_thread_helper+0x7/0x10
[  750.807869]  =======================
[  750.807872] Code: 8b 74 24 20 8b 7c 24 24 83 c4 28 c3 8b 0d 00 0c de f9 85 c9 75 42 be e0 04 de f9 81 c7 0c 01 00 00 b9 33 00 00 00 f3 a5 8b 43 08 <c7> 40 14 50 e3 dd f9 8b 5c 24 1c 31 c0 8b 74 24 20 8b 7c 24 24
[  750.807925] EIP: [<f9dde2a3>] tda827x_probe_version+0xc3/0x130 [tda827x] SS:ESP 0068:ed735f58

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6620): kconfig: VIDEO_SAA7134 must select VIDEO_TVEEPROM
Michael Krufky [Thu, 22 Nov 2007 17:15:34 +0000 (14:15 -0300)]
V4L/DVB (6620): kconfig: VIDEO_SAA7134 must select VIDEO_TVEEPROM

The ability to read Hauppauge eeprom's was recently added to saa7134,
so we must build the tveeprom module.

Thanks to Matthias Schwarzott for pointing this out.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6619): Use MTS firmware for the HVR-900
Aidan Thornton [Tue, 20 Nov 2007 18:25:08 +0000 (15:25 -0300)]
V4L/DVB (6619): Use MTS firmware for the HVR-900

The HVR-900 requires the MTS version of the xc3028 firmware in order
to get any sound. The below patch selects this firmware variant on
HVR-900 cards, as well as splitting the HVR-950 into its own entry
(since I don't know if it uses the MTS variant and it will have to be
split off eventually anyway).

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6618): drivers/media/dvb: Add missing "space"
Joe Perches [Tue, 20 Nov 2007 01:48:15 +0000 (22:48 -0300)]
V4L/DVB (6618): drivers/media/dvb: Add missing "space"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6617): drivers/media/video: Add missing "space"
Joe Perches [Tue, 20 Nov 2007 12:00:35 +0000 (09:00 -0300)]
V4L/DVB (6617): drivers/media/video: Add missing "space"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6616): drivers/media/radio: Add missing "space"
Joe Perches [Tue, 20 Nov 2007 01:48:16 +0000 (22:48 -0300)]
V4L/DVB (6616): drivers/media/radio: Add missing "space"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6614): Fix driver for i386 architectures
Mauro Carvalho Chehab [Fri, 16 Nov 2007 19:28:21 +0000 (16:28 -0300)]
V4L/DVB (6614): Fix driver for i386 architectures

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6613): Fix: add a missing continue statement
Mauro Carvalho Chehab [Fri, 16 Nov 2007 12:43:19 +0000 (09:43 -0300)]
V4L/DVB (6613): Fix: add a missing continue statement

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6612): Allow RESET_CLK callback and avoids unneeded loading
Michel Ludwig [Fri, 16 Nov 2007 10:49:49 +0000 (07:49 -0300)]
V4L/DVB (6612): Allow RESET_CLK callback and avoids unneeded loading

TM5600/TM6000 needs clock reset during firmware load. This patch adds the
capability of caling a callback method for this.

Also, avoids uneeded firmware loads.

Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6611): Change xc2028_attach method to make easier for DVB
Michel Ludwig [Fri, 16 Nov 2007 10:46:14 +0000 (07:46 -0300)]
V4L/DVB (6611): Change xc2028_attach method to make easier for DVB

Removes uneeded parameters and adds an structure for passing the parameters

This patch is co-authored by Mauro Carvalho Chehab.

Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6610): Fix a wrong typecast
Michel Ludwig [Fri, 16 Nov 2007 10:19:35 +0000 (07:19 -0300)]
V4L/DVB (6610): Fix a wrong typecast

Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6607): saa7134: add support for reading Hauppauge eeprom
Michael Krufky [Thu, 15 Nov 2007 13:34:33 +0000 (10:34 -0300)]
V4L/DVB (6607): saa7134: add support for reading Hauppauge eeprom

Increased size of dev->eedata from 128 to 256, since the Hauppauge data begins
at byte 128.  This has been tested on boards with smaller eeproms, and caused
no problems.

Added comments to distinguish between the various versions of the HVR1110.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6606): saa7134: add autodetection support for alternate subids of Hauppauge...
Michael Krufky [Thu, 15 Nov 2007 13:01:11 +0000 (10:01 -0300)]
V4L/DVB (6606): saa7134: add autodetection support for alternate subids of Hauppauge HVR1110

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6605): Add a modprobe option to manually select audio standard
Mauro Carvalho Chehab [Thu, 15 Nov 2007 14:58:00 +0000 (11:58 -0300)]
V4L/DVB (6605): Add a modprobe option to manually select audio standard

While there's no public API to define audio standard, adds a hack option for
select them. This is needed only for NICAM and A2 firmwares, since AM, BTSC and
EAIJ are already properly handled, on firmware version 2.7.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6603): V4L: videobuf: convert streaming and reading to bitfields
Brandon Philips [Tue, 6 Nov 2007 23:23:08 +0000 (20:23 -0300)]
V4L/DVB (6603): V4L: videobuf: convert streaming and reading to bitfields

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6600): V4L: videobuf: don't chew up namespace STATE_.*, convert to VIDEOBUF_
Brandon Philips [Tue, 6 Nov 2007 23:02:36 +0000 (20:02 -0300)]
V4L/DVB (6600): V4L: videobuf: don't chew up namespace STATE_.*, convert to VIDEOBUF_

s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g
s/STATE_PREPARED/VIDEOBUF_PREPARED/g
s/STATE_QUEUED/VIDEOBUF_QUEUED/g
s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g
s/STATE_DONE/VIDEOBUF_DONE/g
s/STATE_ERROR/VIDEOBUF_ERROR/g
s/STATE_IDLE/VIDEOBUF_IDLE/g

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6598): Fix standard name
Mauro Carvalho Chehab [Thu, 15 Nov 2007 13:45:19 +0000 (10:45 -0300)]
V4L/DVB (6598): Fix standard name

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6595): Corrects printk lines
Mauro Carvalho Chehab [Thu, 15 Nov 2007 12:44:30 +0000 (09:44 -0300)]
V4L/DVB (6595): Corrects printk lines

Make the driver less verbose by default. It adds a debug parameter to make the
driver more verbose.
Also, error messages were using KERN_ERR level, instead of KERN_INFO.
A few printk messages were reviewed to make them more clear.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6594): Add tuner_err macro
Mauro Carvalho Chehab [Thu, 15 Nov 2007 12:35:44 +0000 (09:35 -0300)]
V4L/DVB (6594): Add tuner_err macro

Some tuners, like xc3028, need to print error messages. Instead of declaring
local macros, create a tuner global macro for printing tuner errors.

To preserve CodingStyle on all tuner_macros, a few CodingStyle violations were
fixed at the other macros:
- lines with more than 80 columns
- two statements at the same line

The patch also removes the CodingStyle violation of having emacs declarations
inside de source code (CodingStyle chapter 18).

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6593): Fix scode table loading
Mauro Carvalho Chehab [Thu, 15 Nov 2007 11:43:53 +0000 (08:43 -0300)]
V4L/DVB (6593): Fix scode table loading

Xceive 2028/3028 has a concept of scode/dcode.
Scode is a table of 16 values (each with 12 bytes i2c sequence).
Dcode is the entry of Scode table that should be used, given a certain
frequency.

The idea is that, depending on what frequency is selected, and according with a
country-based (or standard-based?) table, the Xceive should be "hacked" to
fine-tune that specific frequency.

By default, Scode=0 is used, for undefined frequencies. Also, Scode=0 seems to
be the most used value.

This patch adds the capability of selecting a scode. However, extra work will
be needed to allow auto-selecting the proper scode, for a given set of
frequencies.

I'm not sure what would be the proper way for implementing the dcode selection.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6592): Add the capability to work with more complete firmwares
Mauro Carvalho Chehab [Wed, 14 Nov 2007 22:30:28 +0000 (19:30 -0300)]
V4L/DVB (6592): Add the capability to work with more complete firmwares

Firmware version 2.7 has other firmware types. This patch adds the capability
for the driver to work with those newer types.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6591): Adds support for MT9V111 on sn9c102
Luca Risolia [Mon, 12 Nov 2007 14:42:54 +0000 (11:42 -0300)]
V4L/DVB (6591): Adds support for MT9V111 on sn9c102

Adds a new image sensor to the sn9c102 driver.

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6590): Adding support for VHF with MT2266-devices
Olivier DANET [Mon, 12 Nov 2007 13:48:51 +0000 (10:48 -0300)]
V4L/DVB (6590): Adding support for VHF with MT2266-devices

MT2266 :
- support for VHF
- Minor enhancements

Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6589): Gigabyte u7000 usb dvb-t support
dominik [Sat, 10 Nov 2007 22:23:31 +0000 (19:23 -0300)]
V4L/DVB (6589): Gigabyte u7000 usb dvb-t support

Signed-off-by: dominik <dominik95@free.fr>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6588): Leadtek Winfast DTV Dongle remote control
Jaroslav Barton [Sat, 10 Nov 2007 22:17:45 +0000 (19:17 -0300)]
V4L/DVB (6588):  Leadtek Winfast DTV Dongle remote control

Add remote controller support for Leadtek Winfast DTV Dongle based on
DiB7700P, MT2060 and using last drivers (6040:6a79c243aecc), firmware
dvb-usb-dib0700-03-pre1.fw

Signed-off-by: Jaroslav Barton <djaara@djaara.net>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6587): Cleanup at tv norm selection
Mauro Carvalho Chehab [Sun, 11 Nov 2007 17:15:34 +0000 (14:15 -0300)]
V4L/DVB (6587): Cleanup at tv norm selection

With the conversion to the vidio_ioctl2, tvnorms array is not required anymore.

Also, removed some code from V4L1 time (VIDEO_MODE_foo), specied at the
non-used video_decoder.h.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6586): Remove some dead code and make drive fully V4L2 compatible
Mauro Carvalho Chehab [Sun, 11 Nov 2007 16:23:54 +0000 (13:23 -0300)]
V4L/DVB (6586): Remove some dead code and make drive fully V4L2 compatible

There were some vestiges of an old V4L1 I2C driver that were called by em28xx.
This patch removes this dead code, and replaces videodev.h to videodev2.h

Now, this driver doesn't require V4L1 anymore.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6585): Convert em28xx to video_ioctl2
Mauro Carvalho Chehab [Sun, 11 Nov 2007 16:17:17 +0000 (13:17 -0300)]
V4L/DVB (6585): Convert em28xx to video_ioctl2

Uses the newer ioctl handler at videodev. This patch also cleans up some
bad logic at the driver and do CodingStyle and other cleanups at the
resulting driver.

Also, since VIDIOCMBUF were not working, the V4L1 compat code were removed.
The compat code will eventually be re-inserted, if we find a clean way for
implementing compatibility with the old API.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6584): Fix read() method
Mauro Carvalho Chehab [Sun, 11 Nov 2007 04:13:49 +0000 (01:13 -0300)]
V4L/DVB (6584): Fix read() method

Backport read() fixes from Markus Rechberger.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6583): Fix em28xx read stream locking
Mauro Carvalho Chehab [Sun, 11 Nov 2007 04:08:26 +0000 (01:08 -0300)]
V4L/DVB (6583): Fix em28xx read stream locking

On some situations, closing an streaming application and re-opening were
returning -EBUSY.

Uses the same locking schema also present on cx88.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6582): Fix em28xx to allow multiple open
Mauro Carvalho Chehab [Sun, 11 Nov 2007 01:21:01 +0000 (22:21 -0300)]
V4L/DVB (6582): Fix em28xx to allow multiple open

Allows shared access support for em28xx. Just one userspace application is
allowed to get stream. The other(s) application(s) can change V4L2 controls,
set video standards, etc.

This patch were splited from Markus Rechberger's tree and backported to 2.6.17
by Pádraig Brady.

The original patch were ported to the latest em28xx version and had CodingStyle
corrected to solve the issues pointed by scripts/checkpatch.pl.

Thanks to Pádraig Brady <P@draigBrady.com> for pointing this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6580): Set slave's master before master's attach call.
Sakari Ailus [Tue, 30 Oct 2007 08:52:52 +0000 (05:52 -0300)]
V4L/DVB (6580): Set slave's master before master's attach call.

V4L: Int if: Set slave's master before attach, remove master argument

The master also now gets its own pointer from slave's structure.

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6578): dvb-usb: make some debug vars static
Adrian Bunk [Mon, 5 Nov 2007 17:07:06 +0000 (14:07 -0300)]
V4L/DVB (6578): dvb-usb: make some debug vars static

This patch makes some needlessly global debug variables static.

opera1.h became so small that I removed it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6577): et61x251/: make 5 functions static
Adrian Bunk [Mon, 5 Nov 2007 17:07:26 +0000 (14:07 -0300)]
V4L/DVB (6577): et61x251/: make 5 functions static

This patch makes the following needlessly global functions in
et61x251_core.c static:
- et61x251_read_reg()
- et61x251_i2c_try_read()
- et61x251_i2c_try_write()
- et61x251_i2c_read()
- et61x251_i2c_write()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6576): cx88-mpeg.c: make 4 functions static
Adrian Bunk [Mon, 5 Nov 2007 17:07:22 +0000 (14:07 -0300)]
V4L/DVB (6576): cx88-mpeg.c: make 4 functions static

This patch makes the following needlessly global functions static:
- cx8802_init_common()
- cx8802_fini_common()
- cx8802_suspend_common()
- cx8802_resume_common()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6575): cx23885/: cleanups
Adrian Bunk [Mon, 5 Nov 2007 17:07:20 +0000 (14:07 -0300)]
V4L/DVB (6575): cx23885/: cleanups

This patch contains the following cleanups:
- make the following needlessly global code static:
  - cx23885-core.c: struct cx23885_sram_channels[]
  - cx23885-core.c: struct cx23887_sram_channels[]
  - cx23885-core.c: cx23885_wakeup()
  - cx23885-core.c: cx23885_sram_channel_setup()
  - cx23885-core.c: cx23885_sram_channel_dump()
  - cx23885-core.c: cx23885_risc_disasm()
  - cx23885-core.c: cx23885_shutdown()
  - cx23885-core.c: cx23885_reset()
  - cx23885-core.c: cx23885_dev_unregister()
  - cx23885-core.c: cx23885_risc_databuffer()
  - cx23885-core.c: cx23885_risc_stopper()
- #if 0 the following unused functions:
  - cx23885-core.c: cx23885_risc_buffer()
  - cx23885-core.c: cx23885_cancel_buffers()
- remove the following unused EXPORT_SYMBOL's:
  - cx23885-cards.c: cx23885_boards
  - cx23885-i2c.c: cx23885_call_i2c_clients

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reviewed-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6574): common/ir-functions.c: make a function static
Adrian Bunk [Mon, 5 Nov 2007 17:07:18 +0000 (14:07 -0300)]
V4L/DVB (6574): common/ir-functions.c: make a function static

ir_rc5_decode() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6573): unexport flexcop_reset_block_300
Adrian Bunk [Mon, 5 Nov 2007 17:06:52 +0000 (14:06 -0300)]
V4L/DVB (6573): unexport flexcop_reset_block_300

This patch removes the unused EXPORT_SYMBOL(flexcop_reset_block_300).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6572): dvb-usb/vp702x.c: cleanups
Adrian Bunk [Mon, 5 Nov 2007 17:06:47 +0000 (14:06 -0300)]
V4L/DVB (6572): dvb-usb/vp702x.c: cleanups

This patch contains the following cleanups:
- make the needlessly global vp702x_usb_out_op() static
- #if 0 the unused vp702x_power_ctrl()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6571): dvb-usb/gp8psk.c: #if 0 gp8psk_bcm4500_reload()
Adrian Bunk [Mon, 5 Nov 2007 17:06:41 +0000 (14:06 -0300)]
V4L/DVB (6571): dvb-usb/gp8psk.c: #if 0 gp8psk_bcm4500_reload()

This patch #if 0's the unused gp8psk_bcm4500_reload()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6570): core/dvb_ringbuffer.c: remove unused exports
Adrian Bunk [Mon, 5 Nov 2007 17:06:38 +0000 (14:06 -0300)]
V4L/DVB (6570): core/dvb_ringbuffer.c: remove unused exports

This patch removes the following unused EXPORT_SYMBOL's:
- dvb_ringbuffer_flush
- dvb_ringbuffer_pkt_write
- dvb_ringbuffer_pkt_read
- dvb_ringbuffer_pkt_dispose
- dvb_ringbuffer_pkt_next

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6569): bt8xx/dst.c: make code static
Adrian Bunk [Mon, 5 Nov 2007 17:06:31 +0000 (14:06 -0300)]
V4L/DVB (6569): bt8xx/dst.c: make code static

This patch makes the following needlessly global code static:
- dst_gpio_outb()
- dst_gpio_inb()
- rdc_8820_reset()
- dst_pio_enable()
- dst_command()
- struct tuner_list[]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6564): Move check before lock
Roel Kluin [Tue, 6 Nov 2007 13:25:16 +0000 (10:25 -0300)]
V4L/DVB (6564): Move check before lock

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
CC: Antti Palosaari <crope@iki.fi>
CC: Carl Lundqvist <comabug@gmail.com>
CC: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6563): tda8290: optimize for loop in tda829x_probe function
Michael Krufky [Mon, 5 Nov 2007 12:54:42 +0000 (09:54 -0300)]
V4L/DVB (6563): tda8290: optimize for loop in tda829x_probe function

Thanks to Trent Piepho for pointing this out.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6562): Make HVR900 to use also tveeprom
Mauro Carvalho Chehab [Mon, 5 Nov 2007 12:30:39 +0000 (09:30 -0300)]
V4L/DVB (6562): Make HVR900 to use also tveeprom

Hauppauge firmwares can be decoded using tveeprom. This patch adds HVR-900 as
a tveeprom client. It also adds xc3028 tuner entry to tveeprom.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6561): Fix xc2028 get register functions and calls
Mauro Carvalho Chehab [Mon, 5 Nov 2007 12:07:13 +0000 (09:07 -0300)]
V4L/DVB (6561): Fix xc2028 get register functions and calls

The status registers require a dword for setting register. Fix it on all
occurrences, and at xc3028_get_reg. Also, improves the hardware/firmware
detection printk.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6560): Fix a bug when setting tuner type
Mauro Carvalho Chehab [Mon, 5 Nov 2007 11:42:55 +0000 (08:42 -0300)]
V4L/DVB (6560): Fix a bug when setting tuner type

Tuner-type were correctly filled only by the hint function.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6559): Fix a buffer overflow at xc2028_get_reg
Mauro Carvalho Chehab [Mon, 5 Nov 2007 11:41:50 +0000 (08:41 -0300)]
V4L/DVB (6559): Fix a buffer overflow at xc2028_get_reg

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6557): tea5767: remove unnecessary warning
Hans Verkuil [Thu, 1 Nov 2007 09:19:39 +0000 (06:19 -0300)]
V4L/DVB (6557): tea5767: remove unnecessary warning

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6556): tuner: convert to bus-based I2C API
Hans Verkuil [Sun, 4 Nov 2007 14:03:36 +0000 (11:03 -0300)]
V4L/DVB (6556): tuner: convert to bus-based I2C API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6555): tuner: reorder functions to prepare for i2c conversion
Hans Verkuil [Sun, 4 Nov 2007 13:53:09 +0000 (10:53 -0300)]
V4L/DVB (6555): tuner: reorder functions to prepare for i2c conversion

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6553): tuner: replace default_mode_mask
Hans Verkuil [Sun, 4 Nov 2007 13:42:42 +0000 (10:42 -0300)]
V4L/DVB (6553): tuner: replace default_mode_mask

The default_mode_mask global is replaced by a list of tuner structs. The
tuner driver now walks that list to see which radio and/or tv tuner
devices are registered to a given i2c adapter.

The default_mode_mask global had to go since this is no longer supported
with the new bus-based I2C API.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6551): tda8290: rule out tda988x before detecting tda8290/tda8295
Michael Krufky [Sun, 4 Nov 2007 14:03:22 +0000 (11:03 -0300)]
V4L/DVB (6551): tda8290: rule out tda988x before detecting tda8290/tda8295

To ensure prevention of detecting a tda9885/6/7 as a tda8290 or tda8295, we
will rule out the tda988x before testing the tda8290 / tda8295 id registers.

We read 8 bytes from the chip.  If they are all equal, then it is not a
tda829x, or some other error has occurred.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6550): tda8290: return -ENODEV on probe failures
Michael Krufky [Sun, 4 Nov 2007 13:51:28 +0000 (10:51 -0300)]
V4L/DVB (6550): tda8290: return -ENODEV on probe failures

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB(6548b) Fix compilation for em28xx
Mauro Carvalho Chehab [Fri, 25 Jan 2008 13:01:41 +0000 (11:01 -0200)]
V4L/DVB(6548b) Fix compilation for em28xx

From: Mauro Carvalho Chehab <mchehab@infradead.org>

In file included from drivers/media/video/em28xx/em28xx-i2c.c:31:
drivers/media/video/tuner-xc2028.h:10:26: error: dvb_frontend.h: No such file or directory

In file included from drivers/media/video/em28xx/em28xx-i2c.c:31:
drivers/media/video/tuner-xc2028.h:32: warning: 'struct dvb_frontend' declared inside parameter list
drivers/media/video/tuner-xc2028.h:32: warning: its scope is only this definition or declaration, which is probably not what you want

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB(6548a) Fix compilation for TDA8290
Mauro Carvalho Chehab [Fri, 25 Jan 2008 13:01:40 +0000 (11:01 -0200)]
V4L/DVB(6548a) Fix compilation for TDA8290

From: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/tda8290.c:27:21: error: tda827x.h: No such file or directory
drivers/media/video/tda8290.c:28:22: error: tda18271.h: No such file or directory
drivers/media/video/tda8290.c:52: error: field 'cfg' has incomplete type
drivers/media/video/tda8290.c: In function 'tda829x_find_tuner':
drivers/media/video/tda8290.c:590: error: implicit declaration of function 'tda18271_attach'
drivers/media/video/tda8290.c:598: error: implicit declaration of function 'tda827x_attach'

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6546): Add comments for the hint methods
Mauro Carvalho Chehab [Sun, 4 Nov 2007 11:32:42 +0000 (08:32 -0300)]
V4L/DVB (6546): Add comments for the hint methods

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6545): em28xx: autodetect Cinergy 200 USB and VGear PocketTV
Sascha Sommer [Sun, 4 Nov 2007 11:06:48 +0000 (08:06 -0300)]
V4L/DVB (6545): em28xx: autodetect Cinergy 200 USB and VGear PocketTV

Adds autodetection support for the Cinergy200 USB and the VGear PocketTV.

Whenever a usb device with generic empia em2800 usb ids is detected the device
gets scanned for connected i2c devices. If the device list matches an em2800
device in the device list the model id gets changed accordingly.

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6543): tda8290: enable probing of tda8295
Michael Krufky [Sun, 4 Nov 2007 01:14:54 +0000 (22:14 -0300)]
V4L/DVB (6543): tda8290: enable probing of tda8295

Prevent the tda8295 from falsely being detected as a tda9887

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6541): Add V-Gear PocketTV to Cardlist.em28xx
Mauro Carvalho Chehab [Sun, 4 Nov 2007 01:04:33 +0000 (22:04 -0300)]
V4L/DVB (6541): Add V-Gear PocketTV to Cardlist.em28xx

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6539): em28xx: add support for vgear pockettv
Sascha Sommer [Sat, 3 Nov 2007 18:05:07 +0000 (15:05 -0300)]
V4L/DVB (6539): em28xx: add support for vgear pockettv

attached patch adds support for the vgear pockettv.
It seems to require a write to another register for audio to work.
I checked my old cinergydrv and we did the same register write there. I
therefore enabled it for all em2800 based devices.

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6538): em28xx: fix locking to allow accesses from 2 different threads at...
Sascha Sommer [Sun, 4 Nov 2007 00:22:38 +0000 (21:22 -0300)]
V4L/DVB (6538): em28xx: fix locking to allow accesses from 2 different threads at the same time

The attached patch modifies the em28xx driver so that there can be ioctls from
multiple different threads.

This is necessary for capture apps like MPlayer that use different threads for
capturing and channel tuning.

Now the locking is only done for the ioctls that change properties of the
device or access the i2c bus.

It also removes some locks that look unnecessary:

In em28xx_init_dev:
  the videodevice is not registered yet so nothing can access the hardware
 meanwhile, the device struct is not assigned to the interface yet so no race
 with disconnect is possible

In em28xx_release_resources:
  it gets only called when dev->lock is already held

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6537): Add entry for Pixelview Prolink PlayTV USB 2.0
Mauro Carvalho Chehab [Sun, 4 Nov 2007 00:21:57 +0000 (21:21 -0300)]
V4L/DVB (6537): Add entry for Pixelview Prolink PlayTV USB 2.0

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6536): Add a hint for boards without unique USB ID
Mauro Carvalho Chehab [Sun, 4 Nov 2007 00:20:59 +0000 (21:20 -0300)]
V4L/DVB (6536): Add a hint for boards without unique USB ID

This patch adds a function to allow trying to detect boards that shares
the generic IDs.

The current detection method is based at eeprom checksum.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6535): Fix: Adds the generic PCI IDs for em28xx
Mauro Carvalho Chehab [Sat, 3 Nov 2007 11:07:07 +0000 (08:07 -0300)]
V4L/DVB (6535): Fix: Adds the generic PCI IDs for em28xx

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6519): Fix HVR900/HVR950 entry
Mauro Carvalho Chehab [Fri, 2 Nov 2007 00:52:58 +0000 (21:52 -0300)]
V4L/DVB (6519): Fix HVR900/HVR950 entry

- Television is now default;
- Add HVR950 name at the entry.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6517): CodingStyle fixup
Mauro Carvalho Chehab [Thu, 1 Nov 2007 20:47:42 +0000 (17:47 -0300)]
V4L/DVB (6517): CodingStyle fixup

Used scripts/Lindent + manual check + scripts/checkpatch.pl

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6516): Allow faster loading by using 64 bytes block by em28xx i2c write
Mauro Carvalho Chehab [Thu, 1 Nov 2007 19:56:26 +0000 (16:56 -0300)]
V4L/DVB (6516): Allow faster loading by using 64 bytes block by em28xx i2c write

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6508): ttpci: Rework Kconfig menus and Makefile
Trent Piepho [Thu, 1 Nov 2007 04:16:05 +0000 (01:16 -0300)]
V4L/DVB (6508): ttpci: Rework Kconfig menus and Makefile

The ttpci Kconfig file has bugs that cause it to fail in certain Kconfig
situations.  The basic problem is that it selects certain drivers, but does
not depend on the dependencies of those drivers.

See http://article.gmane.org/gmane.comp.video.video4linux/35072

Using the Kconfig file also has some annoyances.  For instance one can't turn
off AV7110 support unless you go down several options and first turn off
budget-patch support.  Normally user selectable drivers are not forced on like
this.

The "AV7110 cards with Budget Patch" option is disabled if "Budget cards"
isn't on.  Normally a driver appears nested under a driver it depends on, but
since drivers that don't depend on "Budget cards" are between the two options,
the config programs can't display the tree correctly.

The Makefile has an issue too.  Some modules, ttpci-eeprom and budget-core,
appear in the Makefile under several different config symbols.  If more than
one of these symbols is on, they will get added the to list of objects
multiple times.  The normal convention is to have a config symbol just the
common object(s) and have the users of the that object either depend on or
select that config symbol.

This patch fixes all these issues.  ttpci-eepom is under a new config symbol,
and so is the budget-core module.  The four different budget card types appear
as sub-drivers under a main "SAA7146 DVB cards" option.  Turning on
budget-patch doesn't force AV7110.  Drivers using SAA7146_VV have the
necessary VIDEO_DEV dependency, so that it isn't possible to select SAA7146_VV
without V4L being on.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6507): bttv: whitespace cleanup
Trent Piepho [Thu, 1 Nov 2007 04:16:04 +0000 (01:16 -0300)]
V4L/DVB (6507): bttv: whitespace cleanup

Someone wasn't using the v4l-dvb commit scripts and so didn't run the
automatic whitespace cleaner on their code.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6497): saa7146/budget*/dvb-ttpci: Remove V4L1 code
Marco Schluessler [Wed, 31 Oct 2007 04:20:42 +0000 (01:20 -0300)]
V4L/DVB (6497): saa7146/budget*/dvb-ttpci: Remove V4L1 code

Remove V4L1 code.

Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6496): saa7146_vv.h: remove wrong include <linux/videodev.h>
Marco Schluessler [Wed, 31 Oct 2007 03:44:22 +0000 (00:44 -0300)]
V4L/DVB (6496): saa7146_vv.h: remove wrong include <linux/videodev.h>

remove wrong include <linux/videodev.h>

Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6492): tuner: improve tuner_foo printk macros consistency
Michael Krufky [Tue, 30 Oct 2007 12:46:10 +0000 (09:46 -0300)]
V4L/DVB (6492): tuner: improve tuner_foo printk macros consistency

Alter the tuner_foo printk macros to indicate which module is
generating the message.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6491): tuner: prevent repeated "type set" message unless debug is enabled
Michael Krufky [Tue, 30 Oct 2007 12:44:12 +0000 (09:44 -0300)]
V4L/DVB (6491): tuner: prevent repeated "type set" message unless debug is enabled

The tuner sub-module will usually log its type during its _attach() function,
then tuner-core reports which type was attached when control is returned.

In most cases, we expect to see the same message reported from both locations.
We only need to see this second message if debug is enabled.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6490): Remove EXPERIMENTAL from several i2c drivers
Hans Verkuil [Tue, 30 Oct 2007 09:00:05 +0000 (06:00 -0300)]
V4L/DVB (6490): Remove EXPERIMENTAL from several i2c drivers

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6489): ivtv: add support for AVerMedia PVR-150 Plus
Hans Verkuil [Tue, 30 Oct 2007 08:55:58 +0000 (05:55 -0300)]
V4L/DVB (6489): ivtv: add support for AVerMedia PVR-150 Plus

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6488): ivtv: add ASUS Falcon2 support
Hans Verkuil [Tue, 30 Oct 2007 08:50:03 +0000 (05:50 -0300)]
V4L/DVB (6488): ivtv: add ASUS Falcon2 support

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6487): i2c-id: add M52790 driver ID
Hans Verkuil [Tue, 30 Oct 2007 08:41:54 +0000 (05:41 -0300)]
V4L/DVB (6487): i2c-id: add M52790 driver ID

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6486): m52790: add new Mitsubishi A/V switch i2c driver
Hans Verkuil [Tue, 30 Oct 2007 08:41:25 +0000 (05:41 -0300)]
V4L/DVB (6486): m52790: add new Mitsubishi A/V switch i2c driver

This driver is used by the ASUS Falcon2 cx23416-based cards.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6483): ivtv-streams: make file_operations const
Douglas Schilling Landgraf [Mon, 29 Oct 2007 03:44:55 +0000 (00:44 -0300)]
V4L/DVB (6483): ivtv-streams: make file_operations const

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6482): zr364: make file_operations const
Douglas Schilling Landgraf [Mon, 29 Oct 2007 03:37:07 +0000 (00:37 -0300)]
V4L/DVB (6482): zr364: make file_operations const

zr364: make file_operations const

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6481): radio-gemtek: make file_operations const
Douglas Schilling Landgraf [Mon, 29 Oct 2007 02:41:19 +0000 (23:41 -0300)]
V4L/DVB (6481): radio-gemtek: make file_operations const

make file_operations const

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6480): bttv: uses input functions, should depend on INPUT
Randy Dunlap [Mon, 29 Oct 2007 18:19:45 +0000 (15:19 -0300)]
V4L/DVB (6480): bttv: uses input functions, should depend on INPUT

Several media drivers use input_(*) functions so they need to depend on
the INPUT config symbol.

drivers/built-in.o: In function `bttv_input_fini':
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:346: undefined reference to `input_unregister_device'
drivers/built-in.o: In function `bttv_input_init':
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:204: undefined reference to `input_allocate_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:321: undefined reference to `input_register_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6477): Properly fill MODULE_AUTHOR
Mauro Carvalho Chehab [Tue, 30 Oct 2007 02:44:18 +0000 (23:44 -0300)]
V4L/DVB (6477): Properly fill MODULE_AUTHOR

Most of the driver were written by Mauro Carvalho Chehab.
DTV parts were added by Michel Ludwig.

Reviewed-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6476): Add support for analog tv on HVR-950
Mauro Carvalho Chehab [Tue, 30 Oct 2007 02:36:12 +0000 (23:36 -0300)]
V4L/DVB (6476): Add support for analog tv on HVR-950

This patch adds USB ID for HVR-950. It also adds the callback for handling
firmware loading.

Thanks to Markus Reichberger for the reset commands.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6475): Fix some troubles at list handling
Mauro Carvalho Chehab [Mon, 29 Oct 2007 20:38:59 +0000 (17:38 -0300)]
V4L/DVB (6475): Fix some troubles at list handling

- priv->count were wrong. Should be incremented since the first usage;
- forgot to use list_del() to remove the driver;
- Release memory if an error occurs during _attach

Thanks to Aidan Thornton <makosoft@googlemail.com> for pointing this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6474): Add support for tuner-xc2028
Mauro Carvalho Chehab [Mon, 29 Oct 2007 14:33:18 +0000 (11:33 -0300)]
V4L/DVB (6474): Add support for tuner-xc2028

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6473): Prevents double tuner registering
Mauro Carvalho Chehab [Mon, 29 Oct 2007 14:33:18 +0000 (11:33 -0300)]
V4L/DVB (6473): Prevents double tuner registering

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6472): Re-inserts xc2028 attach code, fixing its parameters
Mauro Carvalho Chehab [Mon, 29 Oct 2007 14:33:18 +0000 (11:33 -0300)]
V4L/DVB (6472): Re-inserts xc2028 attach code, fixing its parameters

I2C bus redesign changed i2c parameters. This patch re-adds tuner xc2028
attach function, replacing the parameters to the newer syntax.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6471): tuner: i2c_client cannot be part of the tuner struct
Hans Verkuil [Fri, 14 Sep 2007 08:13:54 +0000 (05:13 -0300)]
V4L/DVB (6471): tuner: i2c_client cannot be part of the tuner struct

The bus-based I2C subsystem allocates the i2c_client struct. So if in order to
be able to convert the tuner to the bus-based I2C API the embedded i2c_client
struct must be removed from the tuner struct and replaced with a pointer.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6470): Avoid breaking compilation
Mauro Carvalho Chehab [Mon, 29 Oct 2007 14:33:18 +0000 (11:33 -0300)]
V4L/DVB (6470): Avoid breaking compilation

The next patchset series will change i2c structs inside tuner. This patch
avoids breaking bissect, by commenting the still unused tuner xc2028.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6469): tuner: remove TUNER_PHILIPS_TDA8295
Michael Krufky [Sat, 27 Oct 2007 16:09:16 +0000 (13:09 -0300)]
V4L/DVB (6469): tuner: remove TUNER_PHILIPS_TDA8295

TUNER_PHILIPS_TDA8290 will autodetect a TDA8290 or a TDA8295,
so we don't need this separate entry anymore.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6468): tda8290: auto-detect tda8290 or tda8295
Michael Krufky [Sat, 27 Oct 2007 05:00:57 +0000 (02:00 -0300)]
V4L/DVB (6468): tda8290: auto-detect tda8290 or tda8295

Consolidate tda8290_attach() and tda8295_attach() into a single function,
tda829x_attach(), which will detect chip combinations tda8290 or tda8295 with
tda8275, tda8275a or tda18271.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6467): v4l2-common: minor cleanups
Hans Verkuil [Tue, 18 Sep 2007 06:22:32 +0000 (03:22 -0300)]
V4L/DVB (6467): v4l2-common: minor cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6466): v4l2-i2c-drv: first call remove, then detach client
Hans Verkuil [Mon, 17 Sep 2007 08:13:45 +0000 (05:13 -0300)]
V4L/DVB (6466): v4l2-i2c-drv: first call remove, then detach client

The remove driver function expects that the client is still attached
to the driver, so do the detach after calling remove().

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>