Karel Zak [Mon, 8 Feb 2010 16:45:42 +0000 (17:45 +0100)]
fdisk: don't check alignment_offset against geometry
The alignment_offset is compensation for DOS compatible partitioning.
It usually matches with disk geometry (e.g. 63 sectors), but the
offset is also exported from phy.disks to RAIDs there the geometry
don't match with the offset. So.. don't print unnecessary warning.
Karel Zak [Thu, 4 Feb 2010 21:19:38 +0000 (22:19 +0100)]
libblkid: don't return error on empty files
Currently, the library does not allow to initialize blkid_probe if the
file (or block device) is empty. The empty file is reported as an
error. That's wrong. The empty file should be interpreted as a file
without any FS or PT. It means that
blkid_do_{probe,safeprobe,fullprobe}()
have to return 1 ("nothing").
Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Karel Zak <kzak@redhat.com>
Karel Zak [Thu, 28 Jan 2010 18:42:04 +0000 (19:42 +0100)]
fdisk: use optimal_io_size
* rename the minimum_io_size variable to io_size
* use blkid_topology_get_optimal_io_size() for io_size initialization
* use blkid_topology_get_minimum_io_size() as a fallback solution for
io_size initialization
Karel Zak [Thu, 28 Jan 2010 15:25:52 +0000 (16:25 +0100)]
login: check that after tty reopen we still work with a terminal
* the login code assumes that stdin is a terminal, it's better to
check (by isatty()) that after tty reopen we still have a terminal
* this patch also removes very old obscure fallback for situations where
ttyname() returns nothing (then ttyn = "/dev/tty??"). I guess that the
fake string was originally for utmp records or so. Currently (in last 10
years...) code requires that the tty name is a real open-able file.
It means the fake tty name is completely useless.
Reported-by: Yann Droneaud <yann@droneaud.fr> Signed-off-by: Karel Zak <kzak@redhat.com>
Karel Zak [Wed, 27 Jan 2010 12:31:16 +0000 (13:31 +0100)]
login: don't link PAMed version with libcrypt
The login, chsh and chfn utils don't need to be linked against libcrypt.
The libcrypt library is necessary only when login utils are not liked
with PAM.
Addresses: https://bugzilla.redhat.com/show_bug.cgi?id=559196 Signed-off-by: Karel Zak <kzak@redhat.com>
Linus Torvalds [Mon, 18 Jan 2010 23:09:21 +0000 (00:09 +0100)]
libblkid: disable read-ahead when probing device files
Read-ahead doesn't work very well on device probing, and can hurt a lot
when we do essentially random accesses on very slow devices. So disable it
if possible.
Karel Zak [Mon, 18 Jan 2010 14:43:25 +0000 (15:43 +0100)]
libblkid: read() optimization for small devices
- don't read the begin (69kB) of the device by one large read()
- fill in the SB buffer dynamically
- use extra buffer for FATs root dir entries (FAT FS label)
on small devices to avoid large reads
Karel Zak [Mon, 18 Jan 2010 11:50:36 +0000 (12:50 +0100)]
libblkid: restrict RAID/FS proving for small devices (1.4MiB)
- don't ignore @size in blkid_probe_set_device()
- ignore extremely small devices (<= 1024 bytes, e.g. extended partitions)
- don't use safe probing for small devices
- don't probe for RAIDs on small devices
Karel Zak [Wed, 6 Jan 2010 10:12:43 +0000 (11:12 +0100)]
fdisk: sleep-after-sync and fsync usage
It seems that sleep() after sync() is unnecessary legacy. It's very
probably unnecessary since kernel 1.3.20. For example the libparted
does not to use sleep() at all.
It seems that more important is fsync() usage in fdisks. For more
details see
DRBD is the Distributed Replicated Block Device, a replication service for low
level block devices.
The attached patch provides libblkid detection for v08 type drbd devices
(v08 is the current one).
[kzak@redhat.com: - port to libblkid 2.17
- use BLKID_USAGE_RAID flag
- remove BLKID_IDINFO_TOLERANT flag
- note that DRBD is supported since kernel v2.6.33-rc1]
Signed-off-by: Bastian Friedrich <bastian.friedrich@collax.com> Signed-off-by: Karel Zak <kzak@redhat.com>
Karel Zak [Mon, 4 Jan 2010 10:34:13 +0000 (11:34 +0100)]
sfdisk: confused about disk size
The size of disk in the sfdisk command is based on number of cylinders
(this is probably legacy from CHS epoch). That's wrong because
partitions are addressed in sectors (LBA), so cylinders don't provide
necessary resolution (granularity).
On Sat, Jan 02, 2010 at 01:01:16PM +0100, Giulio wrote:
> $ cat /sys/block/sda/size
> 184549376
>
> $ sfdisk -d /dev/sda > part.dump
> $ cat part.dump
> # partition table of /dev/sda
> unit: sectors
>
> /dev/sda1 : start= 2048, size= 2097152, Id=83
> /dev/sda2 : start= 2099200, size= 12582912, Id=83
> /dev/sda3 : start= 14682112, size= 84934656, Id=83
> /dev/sda4 : start= 99616768, size= 84932608, Id=83
>
>
> $ sfdisk -L /dev/sda < part.dump
> Checking that no-one is using this disk right now ...
> OK
>
> Disk /dev/sda: 11487 cylinders, 255 heads, 63 sectors/track
> Old situation:
> Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
>
> Device Boot Start End #cyls #blocks Id System
> /dev/sda1 0+ 130- 131- 1048576 83 Linux
> /dev/sda2 130+ 913- 784- 6291456 83 Linux
> /dev/sda3 913+ 6200- 5287- 42467328 83 Linux
> /dev/sda4 6200+ 11487- 5287- 42466304 83 Linux
> Warning: given size (84932608) exceeds max allowable size (84921887)
Mike Frysinger [Sat, 26 Dec 2009 19:56:54 +0000 (14:56 -0500)]
pg: command enters infinite loop
In a multibyte locale such as en_GB.UTF-8, the pg command cannot handle files
containing a form feed character (ASCII 0x0c) at the start of a line. The
program enters an infinite loop.
I've traced the problem to the function endline_for_mb in file pg.c. The code
assumes that the libc function wcwidth will return a nonnegative value, which
is not true for a form feed character. wcwidth returns -1 and the unsigned
variable "pos" goes into underflow.
I'll attach a patch which tests whether the character is printable before
calling wcwidth. If not, it uses instead the width of the constant L'?' which
is later used to replace nonprintable characters. I trust that we can assume
printability of this constant :-)
Steps to Reproduce:
1. Select a multibyte locale (tested with en_GB.UTF-8)
2. Create a file with a form feed character (0x0c) at the start of a line.
3. Try to display this file using the pg command.
Reported-by: Mark Calderbank <m.calderbank@iname.com> Reported-by: Mike Frysinger <vapier@gentoo.org>
Addresses: https://bugs.gentoo.org/297717 Signed-off-by: Karel Zak <kzak@redhat.com>
Karel Zak [Thu, 10 Dec 2009 10:59:46 +0000 (11:59 +0100)]
lib: bug (typo) in function MD5Final()
On Wed, Dec 09, 2009 at 10:08:38PM +0000, Jochen Voss wrote:
> while experimenting with coccinelle, I accidentally found what I
> believe is a bug in util-linux-ng release 2.17-rc2 (downloaded
> today). The problem is the following code in lib/md5.c (around line
> 153):
>
> void MD5Final(unsigned char digest[16], struct MD5Context *ctx)
> {
> [...]
> memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */
> }
>
> The third argument of memset should probably be the size of 'struct
> MD5Context' instead of the size of the pointer. So my guess is
> that the memset line should be
>
> memset(ctx, 0, sizeof(*ctx)); /* In case it's sensitive */
>
> instead. I don't know whether this actually causes a problem,
> but the comment makes it seem possible that it does.
Note, this typo does not have any impact on the utils in the
util-linux-ng project, because we don't use MD5 for any security
sensitive data or cryptographic stuff. The typo also does not have any
impact to the final MD5 hashes.
Reported-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Karel Zak <kzak@redhat.com>
Mike Frysinger [Mon, 7 Dec 2009 14:18:17 +0000 (15:18 +0100)]
flock: fix hang when parent ignores SIGCHLD
If flock is executed from a process which has set SIGCHLD to SIG_IGN, then
flock will eat cpu and hang indefinitely if given a command to execute.
So before we fork(), make sure to set SIGCHLD handling back to the default
so that the later waitpid() doesn't freak out on us.
[kzak@redhat.com: - add a check for waitpid() return value]
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Karel Zak <kzak@redhat.com>
Karel Zak [Fri, 4 Dec 2009 14:45:19 +0000 (15:45 +0100)]
build-sys: rewrite TLS detection
* use more robust tls.m4 from gcc project
The old version (from util-linux-ng) used AC_TRY_COMPILE. That's
wrong. We need to use AC_RUN_IFELSE to check that the result is
link-able and executable.
The new version also test it TLS really works in multi-thread
applications.
* we need to detect TLS usability for cross-compiling
* this new version supports __thread keyword only, it seems that we
needn't to care about anything other
Ludwig Nussel [Fri, 27 Nov 2009 09:15:53 +0000 (10:15 +0100)]
fsck: honor nofail option in fsck
analog to mount gracefully ignoring non existing devices if the "nofail"
option is specified in fstab, also have fsck -A skip them. This way it's
possible to have devices optionally not available during boot but still
have them fsck'd if they are there.
Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de>
projects / util-linux / log