Documentation: /proc/$pid/stat files

Documentation for the /proc/$pid/stat file.

Signed-off-by: Kees Cook <kees@outflux.net>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_serial: fix break handling

The RXBRK field in the AT91/AT32 USART status register has the
following definition according to e.g. the AT32AP7000 data sheet:

    RXBRK: Break Received/End of Break
    0: No Break received or End of Break detected since the last RSTSTA.
    1: Break Received or End of Break detected since the last RSTSTA.

Thus, for each break, the USART sets the RXBRK bit twice. This patch
modifies the driver to report the break event to the serial core only
once by keeping track of whether a break condition is currently
active. The break_active flag is reset as soon as a character is
received, so even if we miss the start-of-break interrupt this should
do the right thing.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ivan Kuten <ivan.kuten@promwad.com>
Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init: wait for asynchronously scanned block devices

Some buses (e.g.  USB and MMC) do their scanning of devices in the
background, causing a race between them and prepare_namespace().  In order
to be able to use these buses without an initrd, we now wait for the device
specified in root= to actually show up.

If the device never shows up than we will hang in an infinite loop.  In
order to not mess with setups that reboot on panic, the feature must be
turned on via the command line option "rootwait".

[bunk@stusta.de: root_wait can become static]
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

O_CLOEXEC for SCM_RIGHTS

Part two in the O_CLOEXEC saga: adding support for file descriptors received
through Unix domain sockets.

The patch is once again pretty minimal, it introduces a new flag for recvmsg
and passes it just like the existing MSG_CMSG_COMPAT flag.  I think this bit
is not used otherwise but the networking people will know better.

This new flag is not recognized by recvfrom and recv.  These functions cannot
be used for that purpose and the asymmetry this introduces is not worse than
the already existing MSG_CMSG_COMPAT situations.

The patch must be applied on the patch which introduced O_CLOEXEC.  It has to
remove static from the new get_unused_fd_flags function but since scm.c cannot
live in a module the function still hasn't to be exported.

Here's a test program to make sure the code works.  It's so much longer than
the actual patch...

#include <errno.h>
#include <error.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <sys/un.h>

#ifndef O_CLOEXEC
# define O_CLOEXEC 02000000
#endif
#ifndef MSG_CMSG_CLOEXEC
# define MSG_CMSG_CLOEXEC 0x40000000
#endif

int
main (int argc, char *argv[])
{
  if (argc > 1)
    {
      int fd = atol (argv[1]);
      printf ("child: fd = %d\n", fd);
      if (fcntl (fd, F_GETFD) == 0 || errno != EBADF)
        {
          puts ("file descriptor valid in child");
          return 1;
        }
      return 0;

    }

  struct sockaddr_un sun;
  strcpy (sun.sun_path, "./testsocket");
  sun.sun_family = AF_UNIX;

  char databuf[] = "hello";
  struct iovec iov[1];
  iov[0].iov_base = databuf;
  iov[0].iov_len = sizeof (databuf);

  union
  {
    struct cmsghdr hdr;
    char bytes[CMSG_SPACE (sizeof (int))];
  } buf;
  struct msghdr msg = { .msg_iov = iov, .msg_iovlen = 1,
                        .msg_control = buf.bytes,
                        .msg_controllen = sizeof (buf) };
  struct cmsghdr *cmsg = CMSG_FIRSTHDR (&msg);

  cmsg->cmsg_level = SOL_SOCKET;
  cmsg->cmsg_type = SCM_RIGHTS;
  cmsg->cmsg_len = CMSG_LEN (sizeof (int));

  msg.msg_controllen = cmsg->cmsg_len;

  pid_t child = fork ();
  if (child == -1)
    error (1, errno, "fork");
  if (child == 0)
    {
      int sock = socket (PF_UNIX, SOCK_STREAM, 0);
      if (sock < 0)
        error (1, errno, "socket");

      if (bind (sock, (struct sockaddr *) &sun, sizeof (sun)) < 0)
        error (1, errno, "bind");
      if (listen (sock, SOMAXCONN) < 0)
        error (1, errno, "listen");

      int conn = accept (sock, NULL, NULL);
      if (conn == -1)
        error (1, errno, "accept");

      *(int *) CMSG_DATA (cmsg) = sock;
      if (sendmsg (conn, &msg, MSG_NOSIGNAL) < 0)
        error (1, errno, "sendmsg");

      return 0;
    }

  /* For a test suite this should be more robust like a
     barrier in shared memory.  */
  sleep (1);

  int sock = socket (PF_UNIX, SOCK_STREAM, 0);
  if (sock < 0)
    error (1, errno, "socket");

  if (connect (sock, (struct sockaddr *) &sun, sizeof (sun)) < 0)
    error (1, errno, "connect");
  unlink (sun.sun_path);

  *(int *) CMSG_DATA (cmsg) = -1;

  if (recvmsg (sock, &msg, MSG_CMSG_CLOEXEC) < 0)
    error (1, errno, "recvmsg");

  int fd = *(int *) CMSG_DATA (cmsg);
  if (fd == -1)
    error (1, 0, "no descriptor received");

  char fdname[20];
  snprintf (fdname, sizeof (fdname), "%d", fd);
  execl ("/proc/self/exe", argv[0], fdname, NULL);
  puts ("execl failed");
  return 1;
}

[akpm@linux-foundation.org: Fix fastcall inconsistency noted by Michael Buesch]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Introduce O_CLOEXEC

The problem is as follows: in multi-threaded code (or more correctly: all
code using clone() with CLONE_FILES) we have a race when exec'ing.

   thread #1                       thread #2

   fd=open()

                                   fork + exec

  fcntl(fd,F_SETFD,FD_CLOEXEC)

In some applications this can happen frequently.  Take a web browser.  One
thread opens a file and another thread starts, say, an external PDF viewer.
 The result can even be a security issue if that open file descriptor
refers to a sensitive file and the external program can somehow be tricked
into using that descriptor.

Just adding O_CLOEXEC support to open() doesn't solve the whole set of
problems.  There are other ways to create file descriptors (socket,
epoll_create, Unix domain socket transfer, etc).  These can and should be
addressed separately though.  open() is such an easy case that it makes not
much sense putting the fix off.

The test program:

#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>

#ifndef O_CLOEXEC
# define O_CLOEXEC 02000000
#endif

int
main (int argc, char *argv[])
{
  int fd;
  if (argc > 1)
    {
      fd = atol (argv[1]);
      printf ("child: fd = %d\n", fd);
      if (fcntl (fd, F_GETFD) == 0 || errno != EBADF)
        {
          puts ("file descriptor valid in child");
          return 1;
        }
      return 0;
    }

  fd = open ("/proc/self/exe", O_RDONLY | O_CLOEXEC);
  printf ("in parent: new fd = %d\n", fd);
  char buf[20];
  snprintf (buf, sizeof (buf), "%d", fd);
  execl ("/proc/self/exe", argv[0], buf, NULL);
  puts ("execl failed");
  return 1;
}

[kyle@parisc-linux.org: parisc fix]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

buffer: kill old incorrect comment

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a flag to indicate deferrable timers in /proc/timer_stats

Add a flag in /proc/timer_stats to indicate deferrable timers.  This will
let developers/users to differentiate between types of tiemrs in
/proc/timer_stats.

Deferrable timer and normal timer will appear in /proc/timer_stats as below.
  10D,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
   10,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)

Also version of timer_stats changes from v0.1 to v0.2

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove odd and misleading comments from uio.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: prevent dma dependent code from linking on !HAS_DMA archs

Continuing the work started in 411f0f3edc141a582190d3605cadd1d993abb6df ...

This enables code with a dma path, that compiles away, to build without
requiring additional code factoring.  It also prevents code that calls
dma_alloc_coherent and dma_free_coherent from linking whereas previously
the code would hit a BUG() at run time.  Finally, it allows archs that set
!HAS_DMA to delete their asm/dma-mapping.h file.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: <geert@linux-m68k.org>
Cc: <zippel@linux-m68k.org>
Cc: <spyro@f2s.com>
Cc: <ysato@users.sourceforge.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: clarify "dummy" member in struct inodes_stat_t

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

add printk.time option, deprecate 'time'

Allow printk_time to be enabled or disabled at boot time.  Previously it
could be enabled only, but not disabled.

Change printk_time from an int to a bool since that's what it is.  Make its
logical (exposed) name just be "time" (was "printk_time").

Note: Changes kernel boot option syntax from "time" to "printk.time=value".

Since printk_time is declared as a module_param, it can also be
changed at run-time by modifying
  /sys/module/printk/parameters/time
to a value of 1/Y/y to enabled it or 0/N/n to disable it.

Since printk_time is declared as a module_param, its value can also
be set at boot-time by using
  linux printk.time=<bool>

If the "time" boot option is used, print a message that it is deprecated
and will be removed.

Note its planned removal in feature-removal-schedule.txt.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fault-injection: fix example scripts in documentation

Fix and cleanup example scripts in fault injection documentation.

1. Eliminate broken oops() shell function.

2. Fold failcmd.sh and failmodule.sh into example scripts. It makes
   the example scripts work independent of current working directory.

3. Set "space" parameter to 0 to start injecting errors immediately.

4. Use /sys/module/<modulename>/sections/.data as upper bound of
   .text section. Because some module doesn't have .exit.text section.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fault-injection: add min-order parameter to fail_page_alloc

Limiting smaller allocation failures by fault injection helps to find real
possible bugs.  Because higher order allocations are likely to fail and
zero-order allocations are not likely to fail.

This patch adds min-order parameter to fail_page_alloc.  It specifies the
minimum page allocation order to be injected failures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/block_dev.c: use list_for_each_entry()

fs/block_dev.c: Use list_for_each_entry() instead of list_for_each()
in nr_blockdev_pages()

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mutex_unlock() later in seq_lseek()

All manipulations with struct seq_file::version are done under
struct seq_file::lock except one introduced in commit
d6b7a781c51c91dd054e5c437885205592faac21
aka "[PATCH] Speed up /proc/pid/maps"

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: fix a comment when ext2_release_file() is called

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/*/environ: wrong placing of ptrace_may_attach() check

It's a bit dopey-looking and can permit a task to cause a pagefault in an mm
which it doesn't have permission to read from.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: ip2, use msleep for sleeping

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: n_r3964, use wait_event_interruptible

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: genrtc, use wait_event_interruptible

genrtc, use wait_event_interruptible

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: tty_ioctl, little whitespace cleanup

tty_ioctl, little whitespace cleanup

the point is to make
while (++i < n_baud_table);
clear and assign it to the do { } loop

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: tty_ioctl, use wait_event_interruptible_timeout

tty_ioctl, use wait_event_interruptible_timeout

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: mxser_new, fix sparse warning

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove useless tolower in isofs

Remove useless tolower in isofs

Signed-off-by: dave young <hidave.darkstar@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

AFS: drop explicit extern

Don't use explicit extern specifier and quieten sparse warning:
fs/afs/vnode.c:564:12: warning: function 'afs_vnode_link' with external linkage has definition

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kconfig: no STRANGE misc. devices

This config symbol name is confusing and unneeded/unwanted, so just
change it to MISC_DEVICES.

*
* Misc devices
*
Misc devices (MISC_STRANGE_DEV) [Y/n] (NEW)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove clockevents_{release,request}_device

Not called by anything in tree.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty_io: Use kzalloc

Also remove needless casts.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

AFS: implement file locking

Implement file locking for AFS.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: n_hdlc, allow RESTARTSYS retval of tty write

Acked-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Reduce cpuset.c write_lock_irq() to read_lock()

cpuset.c:update_nodemask() uses a write_lock_irq() on tasklist_lock to
block concurrent forks; a read_lock() suffices and is less intrusive.

Signed-off-by: Paul Menage<menage@google.com>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTC: Ratelimit "lost interrupts" message

We gets lots of these when the kernel is running on a hypervisor.  Zach says
"a guest kernel trying to get high frequency RTC will also be inaccurate, and
inevitably will have unhidable interrupt lateness."

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vdso: print fatal signals

Add the print-fatal-signals=1 boot option and the
/proc/sys/kernel/print-fatal-signals runtime switch.

This feature prints some minimal information about userspace segfaults to
the kernel console.  This is useful to find early bootup bugs where
userspace debugging is very hard.

Defaults to off.

[akpm@linux-foundation.org: Don't add new sysctl numbers]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs directory entry cleanup

Function proc_register() will assign proc_dir_operations and
proc_dir_inode_operations to ent's members proc_fops and proc_iops
correctly if ent is a directory. So the early assignment isn't
necessary.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Only send SIGXFSZ when exceeding rlimits.

Some users have been having problems with utilities like cp or dd dumping
core when they try to copy a file that's too large for the destination
filesystem (typically, > 4gb).  Apparently, some defunct standards required
SIGXFSZ to be sent in such circumstances, but SUS only requires/allows it
for when a written file exceeds the process's resource limits.  I'd like to
limit SIGXFSZs to the bare minimum required by SUS.

Patch sent per http://lkml.org/lkml/2007/4/10/302

Signed-off-by: Micah Cowan <micahcowan@ubuntu.com>
Acked-by: Alan Cox <alan@redhat.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rocket.c: fix unchecked mutex_lock_interruptible()

Check the return of mutex_lock_interruptible() in drivers/char/rocket.c and
return ERESTARTSYS if we were interrupted.

Signed-off-by: Satyam Sharma <satyam.sharma@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PIE randomization

This patch is using mmap()'s randomization functionality in such a way that
it maps the main executable of (specially compiled/linked -pie/-fpie)
ET_DYN binaries onto a random address (in cases in which mmap() is allowed
to perform a randomization).

Origin of this patch is in exec-shield
(http://people.redhat.com/mingo/exec-shield/)

[jkosina@suse.cz: pie randomization: fix BAD_ADDR macro]
Signed-off-by: Jan Kratochvil <honza@jikos.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Introduce CONFIG_VIRT_TO_BUS

Make some offending drivers depend on it and set CONFIG_ARCH_NO_VIRT_TO_BUS
for ppc64 so that we don't build those drivers.

This gets PowerPC allmodconfig and allyesconfig much closer to building.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@ftp.linux.org.uk>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mpu401 warning fixes

Fix these:

sound/oss/mpu401.c: In function 'attach_mpu401':
sound/oss/mpu401.c:1006: warning: cast to pointer from integer of different size
sound/oss/mpu401.c:1115: warning: cast to pointer from integer of different size
sound/oss/mpu401.c: In function 'unload_mpu401':
sound/oss/mpu401.c:1230: warning: cast to pointer from integer of different size

by making it implement the request_irq()/free_irq() cookies correctly.

Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isofs: fix up CodingStyle

fs/isofs/* had a bunch of CodingStyle issues.
* Indentation was a mix of spaces and tabs
* "int * foo" instead of "int *foo"
* "while ( foo )" instead of "while (foo)"
* if (foo) blah; on one line instead of two
* Missing printk KERN_ levels
* lots of trailing whitespace
* lines >80 columns changed to wrap.
* Unnecessary prototype removed by shuffling code order in C file.

Should be no functional changes other than slight size increase due to
printk changes.  Further improvement possible, but this is a start..

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edd: switch to pci_get based API

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update zilog timeout

Update zilog timeout, thanks Peter Fuerst.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Peter Fuerst <pf@net.alphadv.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix compiler warnings in acorn.c

warning: 'adfs_partition' defined but not used
warning: 'riscix_partition' defined but not used
warning: 'linux_partition' defined but not used

Signed-off-by: Denver Gingerich <denver@ossguy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/block/z2ram: Remove TRUE/FALSE defines

Remove defines of TRUE and FALSE
  * not used in the file
  * the file is not included somewhere else

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary includes of spinlock.h under include/linux

Remove the obviously unnecessary includes of <linux/spinlock.h> under the
include/linux/ directory, and fix the couple errors that are introduced as
a result of that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fat: gcc 4.3 warning fix

This patch fixes the following warnings.

fs/fat/dir.c: In function 'fat_parse_long':
include/linux/msdos_fs.h:294: warning: array subscript is above array bounds
include/linux/msdos_fs.h:295: warning: array subscript is above array bounds
include/linux/msdos_fs.h:295: warning: array subscript is above array bounds

The ->name is defined as "name[8], ext[3]", but fat_checksum() uses
those as name[11]. There is no actual problem, but it's not a good manner.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make NFS client use seq_list_xxx helpers

This includes /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes entries.

Both need to show the header and use the list_head.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make /proc/self/mounts(tats) use seq_list_xxx helpers

One more simple and stupid switching to the new API.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make /proc/tty/drivers use seq_list_xxx helpers

Simple and stupid like some previous ones.  Just use new API.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make /proc/modules use seq_list_xxx helpers

Here there is not need even in .show callback altering.  The original code
passes list_head in *v.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make /proc/misc use seq_list_xxx helpers

Simple and stupid - just use the helpers.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make crypto API use seq_list_xxx helpers

Simple and stupid - just use the same code from another place in the kernel.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make AFS use seq_list_xxx helpers

These proc files show some header before dumping the list, so the
seq_list_start_head() is used.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

percpu_counters: use for_each_online_cpu()

Now that we have implemented hotunplug-time counter spilling,
percpu_counter_sum() only needs to look at online CPUs.

Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

percpu_counters(): use cpu notifiers

per-cpu counters presently must iterate over all possible CPUs in the
exhaustive percpu_counter_sum().

But it can be much better to only iterate over the presently-online CPUs.  To
do this, we must arrange for an offlined CPU's count to be spilled into the
counter's central count.

We can do this for all percpu_counters in the machine by linking them into a
single global list and walking that list at CPU_DEAD time.

(I hope.  Might have race windows in which the percpu_counter_sum() count is
inaccurate?)

Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vxfs warning fixes

gcc-4.3:

fs/freevxfs/vxfs_lookup.c: In function 'vxfs_find_entry':
fs/freevxfs/vxfs_lookup.c:139: warning: cast from pointer to integer of different size
fs/freevxfs/vxfs_lookup.c: In function 'vxfs_readdir':
fs/freevxfs/vxfs_lookup.c:294: warning: cast from pointer to integer of different size

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse warning fix

gcc-4.3:

fs/fuse/dir.c: In function 'parse_dirfile':
fs/fuse/dir.c:833: warning: cast from pointer to integer of different size
fs/fuse/dir.c:835: warning: cast from pointer to integer of different size

[miklos@szeredi.hu: use offsetof]
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use mutexes instead of semaphores in I2O driver

The I2O driver uses two semaphores as mutexes.  Use the mutex API instead of
the (binary) semaphores.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpu hotplug: fix ksoftirqd termination on cpu hotplug with naughty realtime process

Fix ksoftirqd termination on cpu hotplug with naughty real time process.

Assuming the following case:

 - Try to hot remove CPU2 from CPU1.
 - There is a real time process on CPU2, and that process doesn't sleep at all.
 - That rt process and ksoftirqd/2 is migrated to the CPU0

Then ksoftirqd/2 can't stop becasue that rt process runs everlastingly on
CPU0, and CPU1 waiting the ksoftirqd/2's termination hangs up.  To fix this
problem, set the priority of ksoftirqd/2 to max one before kthread_stop().

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix stop_machine_run problem with naughty real time process

stop_machine_run() does its work on "kstopmachine" thread having max
priority.  However that thread get such priority after woken up.
Therefore, in the following case ...

  - "kstopmachine" try to run on CPU1

  - There is a real time process which doesn't relinquish CPU time
    voluntary on CPU1

...  "kstopmachine" can't start to run and the CPU on which
    stop_machine_run() is runing hangs up.  To fix this problem, call
    sched_setscheduler() before waking up that thread.

Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UDF: check for allocated memory for inode data

This patch adds checking for granted memory while filling up inode data to
prevent possible NULL pointer usage.  If there is not enough memory to fill
inode data we just mark it as "bad".  Also some whitespace cleanup.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prevent an O_NDELAY writer from blocking when a tty write is blocked by the tty atomic writer mutex

Without this a tty write could block if a previous blocking tty write was
in progress on the same tty and blocked by a line discipline or hardware
event.  Originally found and reported by Dave Johnson.

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Dave Johnson <djohnson+linux-kernel@sw.starentnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UDF: check for allocated memory for data of new inodes

Add checking for granted memory for inode data at the moment of its
creation.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use boot based time for uptime in /proc

Commit 411187fb05cd11676b0979d9fbf3291db69dbce2 caused uptime not to increase
during suspend.  This may cause confusion so I restore the old behaviour by
using the boot based time instead of monotonic for uptime.

Signed-off-by: Tomas Janousek <tjanouse@redhat.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use boot based time for process start time and boot time in /proc

Commit 411187fb05cd11676b0979d9fbf3291db69dbce2 caused boot time to move and
process start times to become invalid after suspend.  Using boot based time
for those restores the old behaviour and fixes the issue.

[akpm@linux-foundation.org: little cleanup]
Signed-off-by: Tomas Janousek <tjanouse@redhat.com>
Cc: Tomas Smetana <tsmetana@redhat.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Introduce boot based time

The commits

  411187fb05cd11676b0979d9fbf3291db69dbce2 (GTOD: persistent clock support)
  c1d370e167d66b10bca3b602d3740405469383de (i386: use GTOD persistent clock
    support)

changed the monotonic time so that it no longer jumps after resume, but it's
not possible to use it for boot time and process start time calculations then.
 Also, the uptime no longer increases during suspend.

I add a variable to track the wall_to_monotonic changes, a function to get the
real boot time and a function to get the boot based time from the monotonic
one.

[akpm@linux-foundation.org: remove exports, add comment]
Signed-off-by: Tomas Janousek <tjanouse@redhat.com>
Cc: Tomas Smetana <tsmetana@redhat.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

use no_pci_devices() in pci/search.c

We have an API function for this now.

Cc: Zhang Yanmin <yanmin.zhang@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix jvc cdrom drive lockup

Before calling init_hwif_default, ide_unregister gets lock ide_lock and
disables irq.  init_hwif_default calls ide_default_io_base which calls
pci_get_device and later pci_get_subsys tries to apply for semaphore
pci_bus_sem and goes to sleep.

Mostly, pci_get_device should be called when irq is turned on.

ide_default_io_base just needs find if list pci_devices is empty.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: W1

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: PNP

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: parport

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: I2O

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: crypto hw

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: connector

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - TPM

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Kylene Hall <kjhall@us.ibm.com>
Cc: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - Telephony

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - oprofile

Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - module menu

Change menuconfig objects from "menu, config" into "menuconfig" so that the
user can disable the whole feature without entering its menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - misc strange dev

Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - IPMI

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Acked-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - EDAC

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II - auxdisplay

Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Acked-by: Miguel Ojeda Sandonis <maxextreme@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use write_trylock_irqsave in ptrace_attach

This patch makes ptrace_attach use write_trylock_irqsave().

[akpm@linux-foundation.org: remove unneeded initialisation]
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

introduce write_trylock_irqsave()

Introduce a write_trylock_irqsave() implementation.  Similar in style to
the implementation of spin_trylock_irqsave() in mainline.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: Sripathi Kodi <sripathik@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

more scheduled OSS driver removal

This patch contains the scheduled removal of OSS drivers that:
- have ALSA drivers for the same hardware without known regressions and
- whose Kconfig options have been removed in 2.6.20.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix rmmod/read/write races in /proc entries

Fix following races:
===========================================
1. Write via ->write_proc sleeps in copy_from_user(). Module disappears
   meanwhile. Or, more generically, system call done on /proc file, method
   supplied by module is called, module dissapeares meanwhile.

   pde = create_proc_entry()
   if (!pde)
return -ENOMEM;
   pde->write_proc = ...
open
write
copy_from_user
   pde = create_proc_entry();
   if (!pde) {
remove_proc_entry();
return -ENOMEM;
/* module unloaded */
   }
*boom*
==========================================
2. bogo-revoke aka proc_kill_inodes()

  remove_proc_entry vfs_read
  proc_kill_inodes [check ->f_op validness]
[check ->f_op->read validness]
[verify_area, security permissions checks]
->f_op = NULL;
if (file->f_op->read)
/* ->f_op dereference, boom */

NOTE, NOTE, NOTE: file_operations are proxied for regular files only. Let's
see how this scheme behaves, then extend if needed for directories.
Directories creators in /proc only set ->owner for them, so proxying for
directories may be unneeded.

NOTE, NOTE, NOTE: methods being proxied are ->llseek, ->read, ->write,
->poll, ->unlocked_ioctl, ->ioctl, ->compat_ioctl, ->open, ->release.
If your in-tree module uses something else, yell on me. Full audit pending.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

v850: enable arbitary speed tty ioctls

Adding the defines/macros activates the existing code in the tty layer
and allows this platform to use the arbitary speed ioctl setting layer

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: remove dead file

I forgot this file was here.  It hasn't been used since UML has been in
mainline.

Thanks to Jesper for finding something that needed doing to it, thus reminding
me of its existence.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: limit request size on COWed devices

COWed devices can't handle more than 32 (64 on x86_64) sectors in one request
due to the size of the bitmap being carried around in the io_thread_req.

Enforce that by telling the block layer not to put too many sectors in
requests to COWed devices.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: export hostfs symbols

Add some exports for hostfs that are required after Alberto Bertogli's fixes
for accessing unlinked host files.

Also did some style cleanups while I was here.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: Eliminate kernel allocator wrappers

UML had two wrapper procedures for kmalloc, um_kmalloc and um_kmalloc_atomic
because the flag constants weren't available in userspace code.
kern_constants.h had made kernel constants available for a long time, so there
is no need for these wrappers any more.  Rather, userspace code calls kmalloc
directly with the userspace versions of the gfp flags.

kmalloc isn't a real procedure, so I had to essentially copy the inline
wrapper around __kmalloc.

vmalloc also had its own wrapper for no good reason.  This is now gone.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: simplify helper stack handling

run_helper and run_helper_thread had arguments which were the same in all
callers.  run_helper's stack_out was always NULL and run_helper_thread's
stack_order was always 0.  These are now gone, and the constants folded
into the code.

Also fixed leaks of the helper stack in the AIO and SIGIO code.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: SIGIO support cleanup

Cleanup of the SIGWINCH support.

Some code and comment reformatting.

The stack used for SIGWINCH threads was leaked.  This is now fixed by storing
it with the pid and other information, and freeing it when the thread is
killed.

If something goes wrong with a WIGWINCH thread, and this is discovered in the
interrupt handler, the winch record would leak.  It is now freed, except that
the IRQ isn't freed.  This is hard to do from interrupt context.  This has the
side-effect that the IRQ system maintains a reference to the freed structure,
but that shouldn't cause a problem since the descriptor is disabled.

register_winch_irq is now much better about cleaning up after an
initialization failure.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: handle errors on opening host side of consoles

If the host side of a console can't be opened, this will now produce visible
error messages.

enable_chan now returns a status and this is passed up to con_open and
ssl_open, which will complain if anything went wrong.

The default host device for the serial line driver is now a pts device rather
than a pty device since lots of hosts have LEGACY_PTYS disabled.  This had
always been failing on such hosts, but silently.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: pty channel tidying

Cleanup, mostly style violations.

Tidied the includes.

getmaster returns a real errno, which pty_open returns if there's a
problem.

The printks now have severity.

Changed os_* calls to call libc directly.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: xterm driver tidying

Major tidying of the xterm console driver:
got rid of the tt-mode gdb support
tidied up the includes
fixed lots of style violations
replaced os_* calls with glibc calls in xterm.c
all printk calls now have a severity indicator
the error paths of xterm_open are closer to being right

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: DEBUG_SHIRQ fixes

DEBUG_SHIRQ generates spurious interrupts, triggering handlers such as
mconsole_interrupt() or line_interrupt().  They expect data to be available to
be read from their sockets/pipes, but in the case of spurious interrupts, the
host didn't actually send anything, so UML hangs in read() and friends.
Setting those fd's as O_NONBLOCK makes DEBUG_SHIRQ-enabled UML kernels boot
and run correctly.

Signed-off-by: Eduard-Gabriel Munteanu <maxdamage@aladin.ro>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE

Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE.

This also adds UML support.

Tested on UML and i386.

[akpm@linux-foundation.org: cleanups, speedups, tweaks]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: use get_free_pages to allocate kernel stacks

For some reason, I was using kmalloc instead of get_free_pages for kernel
stacks.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix request->sector update

It is theoretically possible for a request to finish and be freed between
writing it to the I/O thread and updating the sector count.  In this case, the
update will dereference a freed pointer.

To avoid this, I delay the update until processing the next sg segment, when
the request pointer is known to be good.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>